Reddit mentions of Turtle Wax T-241A Polishing Compound & Scratch Remover - 10.5 oz.

Depending on how poor you are and how perfect of a job you want done, you might want to consider some DIY body work. Depending on the depth of the scratch, you might be able to fix it with just some automotive sandpaper (NOT hardware store sandpaper), some polishing compound, and a microfiber cloth.

If the scratches are deep enough that they've gouged out the paint, you'd need to sand, prime, and paint. I'd suggest talking to the good folks over at Bloomington Autocolor - they can fill a spray can with a custom matched color for your car. They can tell you what you need to do, and there are plenty of good Youtube videos as well.

For the dents, sometimes you can pop them out if they're rounded, otherwise you might have to replace the part. You can try a junkyard, or just order online. Depending on how the mirror broke you might be able to do a temp fix with some 2-stage epoxy, otherwise you'll probably want to order a replacement part for that as well.

Also, just because I'm a tutor, the word is "exorbitant", not "absorbent" ;-)

You want to use a cutting compound, then a polisher, then a wax and polisher mix, then a wax. It can be done by hand but it'll be tedious work, a polisher is recommended. you can get a 6 inch polisher on Amazon for cheap

[Cutting compound] (https://www.amazon.com/Meguiars-Mirror-Glaze-Ultra-Cut-Compound/dp/B001O7PNW8/ref=sr_1_3?crid=2X258V2JG0MWL&keywords=cutting+compound&qid=1570408658&sprefix=cutting+compound%2Caps%2C213&sr=8-3)

[Polisher compound] (https://www.amazon.com/Meguiars-Clear-Coat-Polishing-Compound/dp/B006FUT154/ref=sr_1_5?crid=2GPHAWV9X86T2&keywords=polishing+compound&qid=1570408671&sprefix=polish%2Caps%2C203&sr=8-5)

[Wax] (https://www.amazon.com/Turtle-Wax-Polishing-Compound-Scratch/dp/B0009JKGJ2/ref=sr_1_7?crid=1QLIV2CDVRQM8&keywords=wax+compound+for+cars&qid=1570408763&sprefix=wax+compo%2Caps%2C190&sr=8-7)

[Orbital Polisher] (https://www.amazon.com/DECKER-WP900-6-Inch-Random-Polisher/dp/B000077CPT/ref=sr_1_5?crid=PM4UWG6DWJ5C&keywords=polisher+machine+for+car&qid=1570408680&sprefix=polisher%2Caps%2C196&sr=8-5)

I also recommend you completely clean the spot with a clay bar as well so you don't scratch the paint more with crud that's already imbedded in the paint.

[Clay bar] (https://www.amazon.com/IPELY-Detailing-Magic-Cleaner-Clean/dp/B0753FSQN6?ref_=fsclp_pl_dp_5)

Good luck!

Like this?

Turtle Wax T-241A Polishing Compound & Scratch Remover - 10.5 oz. https://www.amazon.com/dp/B0009JKGJ2/ref=cm_sw_r_cp_apa_i_JToqDbD8N20PT

With this?

Viking Car Care 862400 Microfiber Applicator Pads - 5 Inch Diameter, Blue, 6 Pack https://www.amazon.com/dp/B0051MYL8E/ref=cm_sw_r_cp_apa_i_8UoqDbG3V6T3Y

I would recommend


http://www.amazon.com/Turtle-Wax-T-241A-Polishing-Compound/dp/B0009JKGJ2


And a buffer/sander, with a soft bonnet