Reddit mentions: The best parallel cables
We found 21 Reddit comments discussing the best parallel cables. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 9 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. NORCO Computer Parallel Cables (C-SFF8087-4S)
- Discrete to SFF-8087 (Reverse breakout) cable
- Cable Type: Reverse breakout cable
- Cable Length: 1.64ft / 500mm.
- RoHS Compliant
- Connector on Case Backplane End: 1 x 36-pin - SFF-8087.
- Connector on Raid Controller or Motherboard End: 4 x 7-pin - SATA
Features:
Specs:
Color | Red |
Height | 4 inches |
Length | 1 inches |
Width | 2 inches |
2. C2G USB to Parallel Printer Cable - DB25 Adapter Connects Printers to Computer USB Ports - 6ft Cable with Molded Connectors for Durability - 16899
Connect your Parallel, IEEE-1284, printer to a USB port on your PC or hubKeeps the parallel port on a PC free by using USB insteadConnect multiple printers using USB instead of parallelEliminates the need for a switchbox by using USB portsPackage Contents: One adapter cable, User manualNote: This ad...
Specs:
Color | Beige |
Height | 1 Inches |
Length | 4 Inches |
Number of items | 1 |
Release date | November 2018 |
Size | 6 Feet |
Weight | 0.250004205108 Pounds |
Width | 5 Inches |
3. UGREEN USB to DB25 Parallel Printer Cable Adapter Male to Female Connector IEEE 1284 Converter for Laptop Desktop PC Supports Windows, Mac OS, Linux, 6ft
- Superb Parallel Cable: UGREEN USB to DB25 adapter cable is ideal for connecting USB-equipped desktop or notebook computers to a parallel printer, inkjet, laser, POS machines, label printers, cash register and scanner with DB25 parallel interface. Important note:the product is not compatible with a Zip Drive and it will not serve as LPT Port.
- Fast Data Transfer: The DB25 Converter supports data transfer speed up to 12Mbps, fully compliant with USB 1.1/2.0 and IEEE 1284 specifications.
- Driver Free: Plug and Play, no driver installation is required. No external power adapter needed. Support bi-directional data transfer over parallel port.
- Wide Compatibility: This USB DB25 cord is compatible with Windows 10/8.1/8/7/XP/Vista/ 2000, Linux, Mac OS 9.1 and above.
- Note: Check with your printer manufacturer to confirm whether the printer itself supports a USB to Parallel conversion.
Features:
Specs:
Color | Gray |
Size | 6ft |
Weight | 0.36817197754 Pounds |
4. DX-CC Parallel Dipole Alpha Delta Parallel Dipole 80-10
- Range: 80, 40, 20, 15, 10 meters
- Length: 82 ft
- Connection Type: UHF female, SO-239
- Recommended Feedpoint Height: 35.00 ft.
- 1 Year Manufacturer Warranty
Features:
Specs:
Color | Gray |
Height | 5 Inches |
Length | 15 Inches |
Number of items | 1 |
Size | Large |
Weight | 5.7 Pounds |
Width | 14 Inches |
5. C2G/Cables to Go 02896 DB25 Male/Male Parallel LapLinkCompatible Cable (6 Feet/1.82 Meters) Beige
Connector 1: DB25 Male and Connector 2: DB25 MaleEnables simple data transfer from your computer's parallel port.Warranty: Lifetime
Specs:
Color | Beige |
Height | 1 Inches |
Length | 10 Inches |
Number of items | 1 |
Weight | 0.38 Pounds |
Width | 6.25 Inches |
6. iZuga USB to Printer DB25 25-Pin Parallel Port Cable Adapter
- Fully Compliant with USB 1.1 and USB 2.0 and IEEE 1284 Specifications, Fully compatible with all
- Connectors: USB Type A Male - DB25 Female
- Protocol: IEEE 1284
- Color:blue
Features:
Specs:
Color | Blue |
Weight | 0.13 Pounds |
7. OWC Thunderbolt 3 Dual DisplayPort Adapter
Dual DisplayPort ports allows you to connect up to two 4K displays or one 5K display at 60HzUp to 5120 x 2880 Resolution @ 60HzCompatible with any Mac or PC with a native Thunderbolt 3 port: For native Thunderbolt 3 equipped Macs and PCs only - it will not work on older Thunderbolt versions, even th...
Specs:
Color | silver |
Height | 0.59055 Inches |
Length | 3.89763 Inches |
Release date | March 2019 |
Weight | 0.2755778275 Pounds |
Width | 2.3622 Inches |
8. AYA 15Ft (15 Feet) DB25 Male to Centronics 36 Male Parallel Printer Cable
- Number of Connectors 2, 1 x 25-pin DB-25 Male 1 x 36-pin Centronics Male
- Printer Parallel Cable
- 15 Ft. (15 feet)
Features:
Specs:
Color | beigh |
Height | 7 Inches |
Length | 9 Inches |
Width | 0.5 Inches |
9. DB25 Male to Centronics 36 Male Parallel Printer Cable Karcy 1.5M/59 inch 25 Pin Male to Centronics 36 Pin Female Parallel Printer Cable Pack of 1
The parallel cable is used for the connection between the computer and serial devices and transfer the signals between them.Supports LPT parallel printers, copiers, scanners and other devices.Allow you to use bridge or connectivity between the PC and serial port interfacePackage include: 1 x DB 25 P...
Specs:
Color | grey |
🎓 Reddit experts on parallel cables
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where parallel cables are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
If I was buying piecemeal, I would buy...
total ~ $1030
So youd save ~$200, but you also wouldnt be getting the LDG tuner ... which is likely where the cost difference is. IMO you dont need the LDG tuner, the built in ATU + fan dipole that is resonant on multiple bands will get you operating on 80,40,20,10 (and maybe even 6).
Alternatively, you can build very simple 40/20 fan dipole for MUCH cheaper than the DX-CC (like ... $50?) so it really depends how much you want it to work "out of the box".
FWIW i bought the dx-cc when i bought my first HF rig (an FT-897d) because I didnt want to mess with antenna stuff a ton before getting on the air. I've been very happy with it.
edit:
to clarify, I think you are better off spending money on an antenna than you are on a tuner.
> it uses a big plug
Something like this guy? That's my first hit on Amazon. (edit: here's one for 2$. Or get a new printer.)
Take a look at the
__main__.py
for examples of instantiation, and doing other things with the RPi. Actually, look at the whole repo for ideas, and feel free to ask.To me, this sounds like a fun job! How'd you get into it?
USB to DB25 parallel does exist only issue you may run into is getting an older print driver to work in newer OS. Windows 8 & 10 may require driver signing
Edit: I reread and see that you're trying to get the device to print to newer printers or send output to a computer. What's the device?
You may be able to use this software to output to a computer via a serial to USB dongle and convert the output to PDF to print later
There are many portable printers like the HP OfficeJet 250. I helped a client with this printer and it's pretty good on the road, has a scanner built in and battery so you don't have to have it plugged in to power to print. Wireless printing via WiFi direct too.
Not sure if there's a way to do it direct from device to printer, newer printers might not have the right profile to accept a job even if you had a converter. You may have to go device to laptop via convertor, print to PDF using software then just print that PDF to a printer as usual.
My cable arrived today and was an easy set up on Windows 8 (yea sorry, it came with the PC). Selected a Virtual USB port and my HP LJ5L drivers
Good to go - THANKS !
You're welcome!
Link to the case on Norco's website, take special note of the PSU depth max length
Here are a few parts that you will need if you do decide to get that case.
FlexATX PSU The ones on amazon at the time were too long to fit in the case, i had to return the one i bought from them and ended up getting this one.
Reverse Breakout SATA Cable
2x 4PIN MOLEX Extension cables This is to plug into the HDD backplane
This is my server case that I use. I use these cables to go from the back plane to these PCIe sata cards. Back when I used to have my server running Windows I had bought a RAID controller. It wasn't until after I switched to proxmox that I found out the controller wasn't compatible. I think this is a much cheaper option, and I already have multiple of these so my server is pretty much already filled. That is a good idea though. I just didn't really find a good authoritative list on what RAID controllers actually work well with proxmox a few years ago, that is why I went this route. Thanks for the idea though
If you already have the SATA ports handy, just use a reverse breakout cable to connect to them. If you don't, or need more, I'd recommend the controller card I posted plus 2 SAS cables and you'll be good without have to spend $300+.
It's hard to tell from the image; do you know what the connector is? It looks like it might be a DB-25 SCSI connector, which was commonly used by Macs in the 90s. If so, you could use something like this to connect it to a modern computer. Apple has been using HFS since the 80s so it should be readable.
Now whether the drive still works, or whether the data on the discs themselves is still any good, there's no way of knowing.
Something like this https://www.amazon.com/UGREEN-Parallel-Connector-Converter-Supports/dp/B012FF3CW0 and this https://www.amazon.com/StarTech-com-Slimline-Gender-Changer-GC25SM/dp/B00066HP5G maybe?
But then who knows what OS its software supports.
I am using a reverse breakout cable to connect 4 of the SAS ports into my cases backplane.
https://imgur.com/a/HmSaD
This cable:
https://www.amazon.com/NORCO-Computer-Parallel-Cables-C-SFF8087-4S/dp/B002MK7F0Y
To use more than 8 disks with your SAS2 controller, you need to combine 4 of the ports into a single SFF-8087 connection (via the linked reverse breakout cable) and then connect that into a SAS Expander.
My case has a SAS expander built in which is how it expands the 4 SAS2 connections into 24.
A good standalone SAS Expander is this:
https://www.ebay.com/itm/Intel-RES2SV240-24-Port-RAID-Expander-Card-SAS-SATA-PCI-Express-x4/173218886325
So you connect the reverse breakout cable from 4 blue ports on your motherboard, into that SAS Expander, then you can use forward breakout cables to connect the remaining ports on the SAS Expander into disks.
The SAS expander has 6 ports, 1 is used by the connection to your controller, that leaves 5 open ports which you can connect 4 SATA disks per port for a total of 20 disks.
Forward breakout cable:
https://www.monoprice.com/product?p_id=8186
So with 1 reverse breakout, 1 SAS expander, and 5 forward breakout cables, you can connect 20 disks to 4 of your blue SAS ports.
Then you could do the same with the other 4 ports to achieve 40 total disks.
If you wanted to do even more, you could buy a SAS expander with more ports, or start chaining SAS expanders together.
SFF8087 to 4x SATA.
Like these:
http://www.amazon.com/StarTech-com-SAS8087S450-Serial-Attached-Cable/dp/B004KDO22K/ref=sr_1_11?ie=UTF8&qid=1396212048&sr=8-11&keywords=sff+8087
http://www.amazon.com/Monoprice-Internal-SFF-8087-Forward-Breakout/dp/B005E2XTO8/ref=sr_1_4?ie=UTF8&qid=1396212048&sr=8-4&keywords=sff+8087
http://www.amazon.com/Discrete-SFF-8087-Reverse-breakout-cable/dp/B002MK7F0Y/ref=sr_1_7?ie=UTF8&qid=1396212048&sr=8-7&keywords=sff+8087
You mean like this?
External hard drives - The amount of speed you will lose is negligible.
External monitors - Buy a Mini DisplayPort adapter. You can connect to any new TV/most new computer monitors over VGA, DVI or HDMI.
Boot camp - You will likely have to find & install drivers for the Magic Mouse to work properly. Some in this thread say no matter what you do it never works like it did in OSX.
Laser printer - If by huge plug you mean one of those parallel ports, I believe there are parallel/USB adapters available on amazon at well. ( http://www.amazon.com/Cables-Go-16899-IEEE-1284-Parallel/dp/B000UX21PY/ref=sr_1_2?ie=UTF8&qid=1303994144&sr=8-2 ) You can certainly find new USB laser printers if that's what you're after.
You can try this USB to parallel port converter or similar.
Cheetah 15K 2.5" drives run on +5 and +12, so I'd guess either a borked backplane or physical incompatibility between the SAS and SATA connectors.
Oracle doc
with the pinout voltage-wise.
That said, the Raptor drives also use SATA's +3.3 IIRC, which the cheetah does not appear to. Test for +3.3 also.
If the voltages are all there, I'd try plugging in the SAS backplane to a SATA controller with a reverse breakout cable
Here you go, friend!
There are actually plenty for way cheaper prices than the official docks in case one needs only two display outputs and not other ports that come with the official docks.
Owc OWCTB3ADP2DP Thunderbolt 3 Dual DisplayPort Display Adapter, Silver https://www.amazon.com/dp/B077T485Y1/ref=cm_sw_r_cp_api_i_XYvEDbFAREH3S for DisplayPort
StarTech.com 4K 60Hz Thunderbolt 3 to Dual HDMI 2.0 Display Adapter - MacBook Pro and Windows Compatible - Dual Monitor 4K HDMI Video (TB32HD24K60) https://www.amazon.com/dp/B075CLHQY7/ref=cm_sw_r_cp_api_i_f0vEDbHF7N7JG for HDMI
Have to be careful with what is being asked here.
Does your Dad have a DesignJet 5500 as is noted in the link you provided? It's a massive printer...You've also asked for a serial cable, and linked to a parallel descriptor on the DesignJet 5500's printers Spec page. :) (Serial cables are not used for printing unless its USB.)
If you do need to connect a DesignJet 5500, your options will be different depending on if it has addons. I don't have access to one, but I do have a DesignJet 5400 and it only has a USB B, Network, and USB A ports.
If you are connecting to this monster directly from the computer, /u/Boom2Cannon is correct, you need a USB A to USB B cable.
If you really are needing an old style parallel cable (as linked to in the OP), you will need one of these, but double check! Most computers these days no longer have a parallel port.
https://www.amazon.com/Printer-25-Pin-Parallel-Cable-Adapter/dp/B005HBKOH6
PCIe and Thunderbolt related stuff is expensive as fuck. This should work just fine, and could be plugged into a Dell Thunderbolt or USB-C dock if you absolutely need a dock.
> usb-a to usb-c cables that will soon phase out.
This is a DB25 to Centronics 36 pin parallel cable. It has been obsolete for decades. If I pay extra for shipping, I can have it tomorrow.
There is no risk of USB A-to-C cables being difficult to obtain in the foreseeable future.