Reddit mentions: The best pocket & bi-fold door hardware
We found 40 Reddit comments discussing the best pocket & bi-fold door hardware. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 25 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Door Reinforcement | Deadbolt Strike Plate Reinforcer | Anti Kick Door | Two Post Strike Plate | TUFF STRIKE | Satin Nickel
- KEEP YOUR HOME SAFE! The Two Post Strike Plate deadbolt strike plate reinforcement helps to prevent doors from being kicked in, upgrading your home security and keeping you and your family safe!
- UPGRADED DOOR SECURITY! Using two 4 1/2" heavy duty posts embedded into the house studs, a lengthened strike plate and longer screws, the Two Post Strike Plate helps reinforces the deadbolt lock and door jamb to help prevent forced entry.
- EASY INSTALLATION! Easy to follow installation instructions are included as well as a step by step video on our website. Extra security and peace of mind in 20 minutes!
- MULTIPLE FINISHES! Available in four finishes to match the existing door hardware for a clean and polished look.
- Strike Plate measure 4 7/8" long
Features:
Specs:
Color | Satin Nickel |
Height | 5 Inches |
Length | 4.5 Inches |
Weight | 0.6 Pounds |
Width | 1.25 Inches |
2. Ryobi A99DLK3 3-Step Wood Door Lock Installation Kit with Auto-Strike Locator for Deadbolts and Locksets
ALL-IN-ONE: You only need a drill and chisel in addition to this kit to accurately set lock sets or deadbolts without taking measurementsAUTO-STRIKE LOCATOR helps you center the strike plate where you feed your lockFITS ON 1-3/8 inch and 1-3/4 inch thicknesses on doorsEASY-TO-FOLLOW INSTRUCTIONS so ...
Specs:
Height | 7 Inches |
Length | 6.87 Inches |
Weight | 0.62 Pounds |
Width | 4.15 Inches |
3. Defender Security U 9551 Lock and Door Reinforcer, Stainless Steel – Fits 1-3/4” Doors, 2-3/8” Backset, Reinforce & Repair Wood/Metal Doors, Add Extra Security to Your Home,Helps Prevent Forced Entry
- Used to reinforce and repair doors to aide in preventing forced entry
- Fits 1-3/4 in. thick doors, 2-1/8 in. bores, 2-3/8 in. backset, 3-7/8 in. width x 9 in. height
- Features a mortised latch assembly area
- Stamped stainless steel
- Easy slip on design
- Accommodates key-in-knob locksets or deadbolts with a 2-1/8 in. bore
- Used to reinforce and repair doors to aide in preventing forced entry
- Fits 1-3/4 in. thick doors, 2-1/8 in. bores, 2-3/8 in. backset, 3-7/8 in. width x 9 in. height
- Stainless steel
- Stainless steel
Features:
Specs:
Color | Stainless Steel |
Height | 9 Inches |
Length | 3.875 Inches |
Weight | 0.8 Pounds |
Width | 1.75 Inches |
Size | 1-3/4 in. |
Number of items | 1 |
4. Johnson Hardware 153068PF 153068 Commercial Grade Pocket Door Frame (36" x 80"), Wood
- COMMERCIAL GRADE - 1500 series pocket door frame kit, commercial grade.
- HEAVY DUTY - 125 lb. capacity, for 2 x 4 interior wall construction
- ADJUSTABLE - Frames can be cut down to fit any smaller door size.
- MADE IN USA - Built in the United States.
Features:
Specs:
Color | Wood |
Height | 6.5 Inches |
Length | 86 Inches |
Width | 5.1 Inches |
Number of items | 1 |
5. 100PD Commercial Grade Pocket/Sliding Door Hardware (48")
- COMMERCIAL GRADE – Top Hung Pocket Door Hardware with Solid Nylon Wheel.
- FOR POCKET DOORS – Ideal for On-site Custom Pocket/Sliding Door Installations, 125 Lb. Capacity.
- PATENTED DESIGN - For 2 X 4 Interior Wall Construction, Minimum Door Thickness of 1-inch.
- SOLID MATERIALS – ANSI Certified Aluminum Track with Convex Rails.
- MADE IN THE U.S.A. - Built in the United States.
Features:
Specs:
Height | 4 Inches |
Length | 51 Inches |
Weight | 0.000625 Pounds |
Width | 4 Inches |
Size | 48" |
6. 100PD Commercial Grade Pocket / Sliding Door Hardware (72")
- COMMERCIAL GRADE – Top Hung Pocket Door Hardware with Solid Nylon Wheel.
- FOR POCKET DOORS – Ideal for On-site Custom Pocket/Sliding Door Installations, 125 Lb. Capacity.
- PATENTED DESIGN - For 2 X 4 Interior Wall Construction, Minimum Door Thickness of 1-inch.
- SOLID MATERIALS – ANSI Certified Aluminum Track with Convex Rails.
- MADE IN THE U.S.A. - Built in the United States.
Features:
Specs:
Color | Gray |
Height | 1.9 Inches |
Length | 2.3 Inches |
Width | 72 Inches |
Size | 72 Inch |
Number of items | 1 |
7. Slide-Co 16774 Closet Door Roller, 1-3/8-Inch Steel Ball Bearing Wheel,(Pack of 2)
- Steel construction housing
- Center grooved ball bearing wheel
- Side mounted bracket for external mounting
- Easy to install
- Universal design
- For further dimensional information, please see the line drawing
Features:
Specs:
Color | Mill |
Height | 0.5 Inches |
Length | 0.625 Inches |
Width | 1.31 Inches |
Size | 1-3/8 in. |
Number of items | 2 |
8. Prime-Line Products N 6552 Closet Door Roller, Side Mount, 1 Left 1 Right, 7/8-Inch Nylon Wheel
- 7/8in. O.D. round edge nylon wheel
- Adjustable snap-in bracket
- Designed for steel frame by-passing doors
- 1 Left hand and 1 right hand
Features:
Specs:
Color | Mill |
Height | 9.438 Inches |
Length | 2 Inches |
Width | 3.813 Inches |
Number of items | 1 |
9. Johnson Hardware 1601218P 100% Full Access Folding Door Hardware Set
- RESIDENTIAL GRADE - Full access bi-fold hardware with optional hinges for heavier panels.
- MULTIPLE USES - Perfect for pantries, closets and laundry rooms.
- PATENTED DESIGN - For folding doors, 1-1/8" [29mm] to 1-3/4" [44mm] panel thickness.
- EASY TO INSTALL - Sets include all necessary hardware for 2 or 4 folding panel installations.
- MADE IN USA - Manufactured in the United States.
Features:
Specs:
Height | 1.56 Inches |
Length | 16 Inches |
Weight | 1.7 Pounds |
Width | 3.62 Inches |
Size | 24"-36" |
Number of items | 1 |
10. Hardware House - Hardware 52-0304 Brn Dr Track Instl Kit
Specs:
Weight | 10.4 pounds |
11. Bi-Fold Door Bottom Pivot Kit, Two 3/8 in. and Two 7/16 in. Plastic Base Diameters, Grooved Steel Pivot Tips, Adjustable, Pack of 4
- Used to replace missing or damaged hardware of bi-fold closet door systems
- This kit includes a choice of two pairs of bottom pivots, one with 3/8 in. diameter and the other with 7/16 in. diameter
- The adjustable steel pivot screws feature grooved cone-shaped pivot heads that fit into jamb or floor-mounted brackets (not included)
- Bases are constructed of plastic and come in a white finish
- Bottom brackets compatible with these pivots include the following: Prime-Line parts N 6697 and N 6674
- These bottom pivots have a screw in/out door height adjustment feature
Features:
Specs:
Color | Zinc |
Height | 5.438 Inches |
Length | 0.625 Inches |
Weight | 0.04 Pounds |
Width | 3.813 Inches |
Size | 4 Pack |
Number of items | 2 |
12. Deltana PDB42U10B Jamb bolt Bolt Pocket Door Hardware
- Fits gas springs with 10MM ball sockets
- Made from steel and zinc plated
- Qty: 2 pc
- (View pictures above for dimensions)
Features:
13. Door Security Pro - 48" Door Frame Reinforcement Strike Plate
48" Long Strike Plate, Fits Outside Entry Doors That are 1 3/4" Thick14 Gauge Cold-Rolled Steel (About the Thickness of a U.S. Quarter)White, Super Hard Enamel-Like Finish; Really Easy to Install with Just an Electric DrillIncludes 12 - 3 1/4" T-20 Torx Screws (Plus, the Installation Drive Bit Inclu...
Specs:
Color | White |
14. Prime-Line Products N 6604 Folding Shutter Door Top Roller with 5/8-Inch Stud, 17/32-Inch, Nylon
- Used by Glasco, Maran Wuzell and other mirror door manufacturers
- Bottom mount design
- 1-1/2 inch diameter concave ball bearing roller
- Stamped steel housing and roller
- Allows door to roll smoothly
- Rear adjusting screw
Features:
Specs:
Color | Mill |
Height | 5.438 Inches |
Length | 1.75 Inches |
Width | 3.813 Inches |
Size | 5/8 in. x 17/32 in. |
Number of items | 1 |
15. Johnson Hardware 1020 Sliding Door/Pocket Door Hanger Ball Bearing
- PROTECT YOUR CARPETING AND DURABLE HARD SURFACES- Everyday use and movement of furniture can actually be damaging your flooring surfaces. These SoftTouch Caster Cups protect your carpeting from dents and pulls and your vinyl, laminate or tile from mars or scratches.
- SLIDES EASILY KEEPING CASTERS OR FURNITURE LEGS IN PLACE- Use these furniture protector cups to reduce friction and slide your furniture easily keeping the caster or furniture leg in place with its cupped design.
- NEUTRAL DESIGN FOR A VARIETY OF DÉCOR- color options that will blend and not detract from your home décor.
- PERFECT FOR ALL FURNITURE- The long lasting furniture mover caster cups can be used on tables, sofas, chairs, curio cabinets, desks and much more
- INCLUDES 4 CASTER CUPS- Each pack of furniture movers includes (4) 1-3/4" caster cups with smooth vinyl bottom for superior floor protection.
Features:
Specs:
Weight | 0.24 Pounds |
16. Dynasty Hardware Round Bed/Bath Privacy Pocket Door Latch Satin Nickel
Privacy Pocket Door Latch Fits Standard Bore At 2-3/8" BacksetRound design eliminates the need to cut a new notch in doorFor use on interior doors requiring locking functionality, such as bedroom or bathroom doors.Privacy Pocket Door Latch - Locked By Turning Inside Thumbturn. Emergency Unlock On Ou...
Specs:
Color | Satin Nickel |
Height | 3 Inches |
Length | 4 Inches |
Width | 3 Inches |
17. HOMOTEK Privacy Sliding Door Lock with Pull - Replace Old Or Damaged Pocket Door Locks Quickly and Easily, 2-3/4”x2-1/2”, for 1-3/8” Thickness Door, Satin Nickel
- REVERSIBLE AND SAFETY–This Deluxe Pocket Door Privacy Lock And Pull Has a Wide, Easy Grip Design And Is For Left Or Right-Handed Doors.Privacy Functions Allows For You To Lock The Door From The Interior.
- REPLACE OLD OR BROKEN POCKET DOOR LOCKS – When Your Pocket Door Privacy Lock Is Broken Or Old, Don’t Replace The Door Entirely, Just Get a Lock And Pull Set! 3 Finishes (Brushed Satin Nickle, Oil Rubbed Bronze, Black) Are Available.
- EASY INSTALLATION – Installation Is Quick And Easy, Plus All Hardware And Instructions Are Included. The Lock Set Is Non-Handed, Allowing It To Be Used On Both Left And Right-Handed Pocket Doors.Plates Are Reversible!This Lock Adjusts To Install On 1-3/8” Thick Doors And Is a Mortise Installation.
- STRONG AND DURABLE – This Pocket Door Pull And Lock Is Constructed From Stainless Steel, So It’s Durable, Strong And Sure To Last The Test Of Time.
- RELIABLE QUALITY - Your Experience With The Product Is Our Guideline. If You Shall Have Any Concerns, Send Us An e-Mail And We Will Get To You Within 24 Hours.If You Are Not Fully Satisfied, Simply Send Them Back For a New Set Or a Full Refund! No Questions Asked!
Features:
Specs:
Color | With Lock-Brushed Nickel |
Size | 1 Pack |
18. M-D Building Products 5587 M-D Self-Adhesive Door Sweep, 1/2 in W X 36 in L X 1-1/2 in H, White
- This item is a M-D Building Products 5587 Self Adhesive Door Sweep, 36 Inches, White
- Purpose of use for Building Materials & Ladders, household-door-sills
- This product is manufactured in United States
- Provides all season protection against drafts, moisture, dust and insects
- Sticks to all door types
- Flexible to compensate for carpet or uneven doors
- Includes fasteners
- Comes in standard size of 1-1/2-by-36-inches
Features:
Specs:
Color | White |
Height | 2 Inches |
Length | 39 Inches |
Weight | 0.14 Pounds |
Width | 4.25 Inches |
Number of items | 1 |
19. Closet Door Savers Bi-Fold Closet Door Pivot Pin Repair Kit - White
- Easy Installation.
- Fits 1-3/8" doors and works on upper and lower corners.
- Available in three colors, light oak, dark oak, and white.
- Uses 7/16" diameter body pivot pins.
- One right hand and one left hand per package.
Features:
20. Prime-Line Products N 7192 Bi-Fold Door Repair Bracket for 1-3/8-Inch Door,(Pack of 2)
- Stamped steel bracket
- Repairs bi-fold doors that have a split at either the top or bottom
- Fits 1-3/8 inch thick doors
- Accepts a 7/16 inch pivot
- Top or bottom mount design
- For further dimensional information, please see the line drawing
Features:
Specs:
Color | Mill |
Height | 0.25 Inches |
Length | 1.875 Inches |
Weight | 0.01 Pounds |
Width | 1.375 Inches |
Size | 2 Pack |
Number of items | 1 |
🎓 Reddit experts on pocket & bi-fold door hardware
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where pocket & bi-fold door hardware are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I'm not exactly sure on what type of estimates you'll see. I feel like $1k-2k seems about right for everything. But I recommend to get a few, don't feel like you're wasting anyone's time. You have to look out for yourself, and the contractors are trying to win your business. If you decide it's not going to work out for any reason don't feel obligated to hire anyone.
But as far as installation goes, I recommend doing a little research so that you know what it entails. Giving you more negotiation power with your contractors and also making sure they don't underbid the job.
http://www.amazon.com/Johnson-Prod-153068PF-Pocket-Frame/dp/B0002BEPEO/ref=sr_1_1?ie=UTF8&qid=1414581820&sr=8-1&keywords=johnson+hardware+pocket+door You can find this at any hardware store. The installer will also need to buy wood for framing, jambs, trim, drywall, mud and tape.
You can re-use your current doors if you like them, you just need to get new knob hardware, and may need to fill in where the hinges were.
To measure if you have enough room for the pocket door you need to measure the length of the door. Multiply by 2. Then add 1 inch.
https://www.youtube.com/watch?v=iy1vuz1_hgo This video will give you more info on installation.
I just did this exact project. I already had the router so it made it a little easier but I’ve done the chisel method before too. The router gives a bit cleaner look if you have rounded hinges.
Since you have to match up the existing latch to one have to cut, this tool makes it a TON easier.
Ryobi A99DLK3 3-Step Wood Door Lock Installation Kit with Auto-Strike Locator for Deadbolts and Locksets
https://www.amazon.com/dp/B00OGSYRMY/ref=cm_sw_r_cp_api_6EvWAb2HTGX19
That tool includes the hole saw and spade bit but the important part is how it locates where the existing latch is.
Another tip, pull the old door down, lay new door on top and align the tops of the doors, use a pencil transfer the hinge locations and door height (you’ll want to trim the bottom).
Assuming a solid core door. If a hollow core door, first replace with a good metal exterior solid core door and then see below.
Great! We have them listed on Amazon or our website depending on which shopping method you prefer. There are discounts on both sites for 10% off 2, 15% off 3 and 20% off 4 (with free priority shipping) so you can install one on all entry doors in the house.
https://www.amazon.com/dp/B005KP0YGU?ref=myi_title_dp
https://tuff-strike.myshopify.com/products/two-post-strike-plate-satin-nickel
Thank you. For the pocket door I used this set of hardware from Amazon - 100PD Commercial Grade Pocket / Sliding Door Hardware (48") https://www.amazon.com/dp/B00BMTTV8U/ref=cm_sw_r_cp_apa_hpZeAb6AGYY09
It was relatively easy to install and adjust once the door is hung. I would pay more attention to recessing the track in the door header, I don't like that I can see the wheels from inside the bathroom.
The door I ordered from the Depot.
Feather River Doors 24 in. x 80 in. Privacy Smooth 1 Lite Primed MDF Interior Door Slab
https://homedepot.app.link/exOa9A9FeI
SKU# 203191207
I love pocket doors for a space saver.
As far as plaster over Redgard that I am not sure about, but, some quick Googling it doesn't appear so. But that was about 15 seconds of 'research'. I know there are certain types of mortar pre mixes that you're not supposed to use over Redgard.
Fair warning, adding acoustic foam won't help much with blocking sound. Its main purpose is to reduce reverb within a room. What you'd really need is to replace that thin glass door with a solid one like wood, steel, or fiberglass, however these are very far out of your price range. I suppose any amount of insulation would help in your case. You'll just have to experiment on your own. I found foam board insulation can be pretty cheap.
For soundproofing around your door, at the bottom get a door sweep, on the door frame install foam tape. Any gaps of air allow sound to easily pass through, you want to eliminate that. Measure the size of the gap before you buy the wrong size.
I think I was misreading your original intent-- I thought you were trying to add like a back wall and be able to move the front row back and forth IN FRONT of the new 'back' section.
Even so you can modify a pocket door setup for something like this if the french cleat thing doesn't work out :P
http://amzn.com/B000BD6B7W
https://www.bunnings.com.au/cowdroy-1620mm-clear-anodised-robemaker-wardrobe-door-track-set_p3980003
It's pretty common in some regions of the world for interior sliding doors to ride on wheels on a floor track, with just a guide at the top. Have any antipodean friends who could ship stuff to you?
In North America I've only seen similar hardware à la carte rather than in "kits", so you would need to know how to mortice the rollers into the door bottom etc.:
https://www.hangingdoorhardware.com/pocketdoors/sliding_door_bottom_roller/bottom_roller.htm
https://www.wwhardware.com/media/installation/KV-sliding-door-instructions.pdf
With a door "blank" acquired locally, you could surface-mount two rollers ($30) to the face of the door at the bottom, use the mating $40 915A track screwed down to the floor, and have as little as one wall mounted guide to catch the top of the door above the edge of the opening.
This one looks pretty darn close
for anyone that is interested - I found the answer after posting.
Full Access Bi-Fold Door:
http://www.johnsonhardware.com/1601.htm
http://www.amazon.com/Johnson-1601218P-Access-Folding-Hardware/dp/B000BD8KH6
Barn door hardware is probably going to be relatively expensive no matter which way you cut it. I would try to go to an architectural salvage/reclaiming store to see if you can find anything. Sometimes those places get some weird/unique things, examples below
http://www.habitat.org/restores/default.aspx?tgs=Ny8yOC8yMDExIDk6NTU6MjkgQU0%3d
http://www.communityforklift.com/
Found some sets slightly less than the $400 (maybe not the 3form set) you were looking at, just make sure you check the specs to see how much weight the hardware can support before you buy! (recently was looking up for some barn doors for a project for a client)
http://www.3-form.com/hardware-catalog-Slide01.php
http://www.betterbarns.com/Hardware.asp
http://www.barndoorhardware.com/barn-door-hardware/sliding-folding-door-hardware/sliding-door-hardware.html
http://www.amazon.com/52-0304-BRN-TRACK-INSTL-KIT/dp/B001G1GXTE/ref=sr_1_19?ie=UTF8&qid=1311861162&sr=8-19
http://www.amazon.com/Generations-Zinc-Trolley-Hanger/dp/B000X9X3FM/ref=pd_cp_hi_4
http://www.realcarriagedoors.com/hardware-cat.php?page=sliding-hw#flat-track-kits
sorry for the ton of links!
It looks like a bifold door pivot pin https://www.amazon.com/Bi-Fold-Plastic-Diameters-Grooved-Adjustable/dp/B07N8V733G/ref=asc_df_B07N8V733G/
https://www.lowes.com/pd/National-Hardware-0-425-in-Bifold-Closet-Door-Bottom-Pivot-Pin/1000144523
There is a type privacy lock called a jamb bolt that are toggle like, most commonly used for pocket doors. Just google “jamb bolt” or click this link.
https://www.amazon.com/gp/aw/d/B0041L0D0Q/ref=mp_s_a_1_1?ie=UTF8&qid=1518500456&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=deltana+jamb+bolt&psc=1
A pair of metal brackets to hold a 2x4 wood plank across your door, when you're home. $13.
A strike plate for your door, to secure your doors when you're not home. $80.
Some pets to guard your house either way. Priceless.
Figured it out: Barton Kramer #2086- Cox Bi-Fold Door Hanger
Mfr link: http://bartonkramer.com/doors/2086-cox-bi-fold-door-hanger/
Home Depot link: https://www.homedepot.com/p/Prime-Line-1-3-4-in-x-5-8-in-Folding-Shutter-Door-Roller-Nylon-Roller-Assembly-N-6604/202636670
Amazon Link: https://smile.amazon.com/Prime-Line-Products-6604-Folding-Shutter/dp/B00E3N9TE8?tag=519-20
That's the 1020. The one you have linked on amazon is the 1125 (1" ball bearing wheels)
You want either the 1020 (just nylon) or 1025 (ball bearing) it seems. (.75")
https://www.amazon.com/Johnson-Hardware-111-Series-Hanger/dp/B00CU8IQ4M/ref=sr_1_1?s=hi&ie=UTF8&qid=1482994134&sr=1-1&keywords=johnson+hardware+1020
this one works just fine
https://www.amazon.com/Dynasty-Hardware-Privacy-Pocket-Nickel/dp/B075H33J3H/ref=pd_sbs_60_6/132-8390442-2557449?_encoding=UTF8&pd_rd_i=B075H33J3H&pd_rd_r=c65ed707-1f7f-49d9-a8b3-4cbf2d4565c5&pd_rd_w=MNuQM&pd_rd_wg=7HdB1&pf_rd_p=d66372fe-68a6-48a3-90ec-41d7f64212be&pf_rd_r=JE8JDB9X81CEYYEFF13Y&psc=1&refRID=JE8JDB9X81CEYYEFF13Y
Why not use a sliding door rail with a lock?
Here is the mobile version of your link
One of these may work for you:
https://www.amazon.com/Closet-Savers-Bi-Fold-Pivot-Repair/dp/B01GU90892
https://www.amazon.com/Prime-Line-Products-7192-Bi-Fold-Bracket/dp/B00E3NDVUQ
https://www.amazon.com/Prime-Line-Products-7195-Bi-Fold-Bracket/dp/B000RGJRGK
>I've installed a shitload of doors
>I really should let my landlord know about that
Certainly someone with a shitload of experience could probably install a door sweep in about 60 seconds. Why even bother your landlord with that?
yes, the typical pocket door kit is just the rollers and half-studs and you're expected to use a standard door slab.
I've used THIS kit myself. You have to open up the wall and cut out the old studs to make room to use the metal half thick studs, but it was actually pretty easy and very high quality rollers.
Your biggest problem is going to be the existing door knob hole. That's a big hole in the face you'll have to do something with. If you're painting, no big deal. but if you're staining and showing the grain that's a different problem
I need these because ive had a few too many creepers and people steal things off my yard.
or this which is cheaper to stop the drafts under my doors.
im too out of it to ummm...I don't know, fly casual