Reddit mentions: The best power right angle drills
We found 29 Reddit comments discussing the best power right angle drills. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 14 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Neiko 10529A 3/8" Close Quarter Power Drill, 55-Degree Angle | Variable Speed (0-1400 RPM) | 120V
- [CLOSE QUARTER]: This close quarter power drill has a 55-degree angle head that allows the drill to reach into places other drills can’t go and has a 3/8-inch keyed bit holder chuck for easy bit replacement to fit with a variety of applications with an included chuck key.
- [ERGONOMICS]: Ergonomically designed paddle trigger and pistol grip is designed for precise drilling and RPM control and utilizes a grip that is slightly textured to prevent slips and increase accuracy and efficiency.
- [VERSATILE]: The variable speed ranges from 0 to 1400 RPM for precision drilling in tight spaces with a forward/reverse switch that allows for easy directional changes to make fast work for home improvement jobs and more.
- [APPLICATION]: Drill is suitable for use on wood, composition materials, plastics, masonry, metal, and screws to be the perfect companion to the drill bits in your tool collection.
- [SPECIFICATIONS]: Power Supply: 120V ~ 60Hz, Motor Power: 3.8 Amps, ETL approved.
Features:
Specs:
Height | 4.9 Inches |
Length | 12 Inches |
Number of items | 1 |
Size | 120V/0-1400 RPM |
Weight | 3.25 Pounds |
Width | 2.9 Inches |
2. DEWALT Right Angle Attachment, Flex Shaft, 12-Inch (DWARAFS)
- The right angle drill adaptor features Rapid Load(TM) head for easy bit changes
- 90 degree head and flexible shaft of the right angle drill attachment reaches tight spaces
- DEWALT right angle attachment has 10 times magnetic holding power on average vs. DW2505 using #8 truss-head screw
Features:
Specs:
Height | 14.72 Inches |
Length | 3.88 Inches |
Number of items | 1 |
Size | 12" |
Weight | 0.96 Pounds |
Width | 1.5 Inches |
3. PORTER-CABLE 20V MAX Cordless Drill Combo Kit and Impact Driver, 2-Tool (PCCK604L2)
1/2 inch two speed drill/driver. High performance motor delivers 283 Units Watts Out and 0-350/0-1,500 RPM.Compact design 8.25 inch long and 3.5 lbs. Drill features an ergonomic handle design, LED light and bit storage1/4 inch impact driver delivers 1450 in/lbs of torque, 0-2,800 RPM and 0-3,100 BPM...
Specs:
Color | Combo Kit |
Height | 8.88 Inches |
Length | 12.5 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 5 Pounds |
Width | 7.5 Inches |
4. Festool 564274 CXS Compact Drill Driver Set With Right Angle Chuck
- 3 tools in 1, FastFix enables the use of the Centrotec chuck, a keyless chuck and a right angle attachment for gaining access to tight spaces
- Tough inside and out, the CXS features sophisticated electronics that protect the tool and batteries from overcurrent, undervoltage, and overheating.
- An ultra-compact design weighing in at less than 2lbs means maximum comfort during extended use.
- Extremely long battery life and recharge time of only 30 minutes
- Three year warranty on drill, charger and batteries
Features:
Specs:
Height | 4.4 Inches |
Length | 15.5 Inches |
Number of items | 1 |
Weight | 2 Pounds |
Width | 11.5 Inches |
5. Tool Gift For Men Right Angle Drill & Screwdriver Attachment Gift Tool Kit Tight Fit Hex Bit 90 Degree Angle Adapter Power Drill Accessory Driver Extension 00110
Drill holes and drive or remove screws in near impossible places; Save time, money and frustrationWorks with manual or power hex screwdrivers and all power drills; Accepts standard 1/4 inch hex bitsIncludes 6 aircraft quality drill bits & 4 industrial quality screwdriver bits; A tool gift ideaLong i...
Specs:
Height | 0.5 Inches |
Length | 10.75 Inches |
Number of items | 11 |
Weight | 0.000625 Pounds |
Width | 6 Inches |
6. Milwaukee Electric Tool 0370-20 Right Angle Close Quarter Drill, 120 V
3/8 close quarter drillIncludes chuck key with holderOverall weight of just 3.9 lbs.Ideal for use in tight areasMetal framed gear train for longer gear lifeLarge paddle trigger for smooth control and easy grip-inch any positionAngled chuck for reaching close quarters other drills cannot reachTexture...
Specs:
Color | Red, Grey, Black |
Height | 13.8 Inches |
Length | 8.5 Inches |
Number of items | 1 |
Size | 0.375 |
Weight | 4.75 Pounds |
Width | 4.1 Inches |
7. Milwaukee 3107-6 7.0 Amp 1/2" Right Angle Drill
- Power Tools and Accessories
- Country of manufacture: China
- Manufacturer: Milwaukee
- Powerful 7-amp motor
- Use with up to 4-5/8-inch selfeed bits
- Trigger speed control
- Head and handle swivel 360 degrees for easy drilling in tough spots
- Limited warranty, 30-day no-risk trial
Features:
Specs:
Color | Black, Red, Grey |
Height | 21.5 Inches |
Length | 12.2 Inches |
Number of items | 1 |
Size | 0.5 |
Weight | 19 Pounds |
Width | 6.1 Inches |
8. KKmoon 0.8-10mm Right Angle Bend Extension 90 Degree Professional Cordless Drill Attachment Adapter
✿ 10mm keyless chuck, accept 0.8-10mm drill bits, with manual tightening / loosening.✿ 8mm hex shank suits most standard drills: hand/power drills, electric drill, buffing attachments etc.✿ Max. 1500RPM and 20N·m torque.✿ Simple to install and operate, with a handle for stable usage.✿ Mak...
9. Milwaukee 2709-22 M18 Fuel Super Hawg 1/2" Right Angle Drill Kit
M18 Fuel Super Hawg 1/2" Right Angle Drill KitThe product is easy to use and easy to handleThe product is highly durable
Specs:
Height | 11.48 Inches |
Length | 3.88 Inches |
Number of items | 1 |
Size | 1/2" |
Width | 23.33 Inches |
10. DEWALT Right Angle Drill Adapter DWARA050 HD Version in Retail Pack
- Increase the productivity and versatility of your existing drill with the DEWALT DWARA50 Right Angle Drill Adapter. Just tighten this adapter in your chuck and you instantly have access to tight and hard to reach spaces. For use with both corded and cordless drills.
- Tighter access with your current drill/driver
- 2X longer life than the competition
- Accepts any 1/4 in. hex shank accessory
- For use with most drill
Features:
Specs:
Color | Yellow |
Height | 4.9 Inches |
Length | 8.75 Inches |
Weight | 0.35 Pounds |
Width | 1.88 Inches |
11. DEWALT Right Angle Attachment, Impact Ready (DWARA120)
Best-in-class performance and accessibility, with 1.5-In Front-to-back designMagnetism for Fastener retentionEngineered for use in impact drivers, allowing users to drill or driveIncludes 1 right angle attachment
Specs:
Color | Black |
Height | 8.75 Inches |
Length | 3.9 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.3 Pounds |
Width | 1.88 Inches |
12. Milwaukee 1676-6 Hole Hawg 7.5 Amp 1/2-Inch Joist and Stud Drill (includes case)
- Power Tools and Accessories
- Country of manufacture: China
- Manufacturer: Milwaukee
- 7-1/2 amp motor, 1,200 rpm
- Heat-treated gears
- All ball and roller bearings
- Triple-reduction gearing
- 1676-6 Kit includes drill (type 1675-1), handle, chuck key, hard case
Features:
Specs:
Color | Red |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Size | 0.5 |
Weight | 17.7 Pounds |
Width | 0 Inches |
13. Milwaukee 2415-20 M12 12-Volt Lithium-Ion Cordless Right Angle Drill, 3/4 In, Bare Tool, Medium
The product is easy to useThe product is durableThe product is manufactured in ChinaFeatures 3/8-inch single-sleeve ratcheting chuck for maximum versatility and gripAn extended paddle switch allows for controlled use in multiple positionsElectronic clutch with 11 settings plus drill mode for complet...
Specs:
Color | As the picture shown |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Size | Medium |
Weight | 2.25 Pounds |
Width | 0 Inches |
14. DEWALT 20V MAX Right Angle Cordless Drill/Driver Kit (DCD740C1)
Dual speed ranges (0-600/0-2000) RPM for increased user flexibility provides a wide range of applicationsCompact front-to-back length (4 inches) allows users to fit into hard-to-reach spacesMulti-grip trigger provides comfort and convenience, allowing the user to get into tighter spacesLight weight ...
Specs:
Color | Yellow |
Height | 4.6 Inches |
Length | 16 Inches |
Number of items | 1 |
Release date | August 2011 |
Size | 0.5 |
Weight | 0.02 Pounds |
Width | 13 Inches |
🎓 Reddit experts on power right angle drills
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where power right angle drills are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Good luck!
Thanks! Yes, power sanding is the way to go! (And part of the decision to dry and turn these blanks a second time- they were simply too wet to sand right now). Get something cheap like this since it's hard on the tool anyway. (Or maybe you have a better recommendation on this style cheap drill, this one gets bashed quite a bit on the reviews there and I don't have it myself. The brand I have though was equally cheap from a no-name "Denver tool company" and it's still going strong).
Then get something like this and these. Hold the drill upside down and the rotation should be going the opposite of the rotation of the lathe- this will help minimize the scratch pattern. If the lathe is in "forward" you would basically only want to touch the tool to the bowl between 6 o'clock and 9 o'clock. (Get the tool rest out of the way for sanding).
As far as cutting off the tenon at the end, there are a ton of methods that work from vacuum-chucking, to these to these. Lots of guys do a shop-made version of the Longworth chuck, and that might be right up your alley- I've seen your cross-cut sled and I'd say making one of those looks like about an equal level of commitment to the jig! (I haven't made one).
A donut chuck is a another shop-made way to go. (And I have made one of these- easy peasy!)
The method I use most often is even more low-tech though- a jam chuck, with is basically just a cylinder or really crude bowl shape with a layer of foam held in between the cylinder bowl's rim and the inside of the bowl you're finishing held there again in between centers. (that 1/16" or so stuff that comes in tons of colors in about 9×12 sheets at the craft store works really well). Then you just turn off the tenon and this leaves a little bit of a nub (what the live center was up against) and you can just carve that off with a hook knife or a carving chisel (I like the Flexcuts for this).
I would go with a makita or a Bosch. If he has regular bits already then a drill would probably be better. I would go with an impact driver personally, you would need to buy hex bits though since they don't have adjustable chucks.
Edit: this looks like a good deal
Yeah you gotta be more specific.
If your just looking for something random that I've always coveted but never actually bought cause it didn't make sense:
http://www.amazon.com/gp/aw/d/B00506BYFO/ref=mp_s_a_1_1?qid=1395791734&sr=8-1&pi=SX200_QL40
Awesome little drill, just under $300.
Well, I never did find the electric, angled, 2" random orbital sander on Amazon. I did find these right angle drills though. A few of the reviews are from bowl turners.
Gino: https://www.amazon.com/dp/B00339OU4W/ref=sxbs_sxwds-stvp_1?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=3341940462&pd_rd_wg=oBi4x&pf_rd_r=ENN5XTK29NAHT4K24BFR&pf_rd_s=desktop-sx-bottom-slot&pf_rd_t=301&pd_rd_i=B00339OU4W&pd_rd_w=QhdDm&pf_rd_i=angle+drill&pd_rd_r=7eca9f4e-76c1-40f3-8d48-8ce5e8541ec9&ie=UTF8&qid=1519856451&sr=1#customerReviews
Neiko: https://www.amazon.com/dp/B000XUHA8C/ref=psdc_9022404011_t1_B00339OU4W
And there are a couple different ones at HF if you type "angle drill" in their search box.
A normal drill works. But perhaps the right angle style has better ergonomics, and a grip that is closer to your work. If I ever do find the one I was thinking of I'll be sure to post up.
This is kind of pricey but super handy for those situations
DEWALT DWARAFS Right Angle Flex Shaft, 12" https://www.amazon.com/dp/B013UBXU3E/ref=cm_sw_r_cp_api_dPGNzbCPZRX8N
http://www.amazon.com/Neiko-8-Inch-55-Degree-Quarters-Right-Angle/dp/B000XUHA8C/ref=sr_1_2?ie=UTF8&qid=1418839114&sr=8-2&keywords=angle+drill
this angle drill is widely used by turners for all grits + buffing. They're inexpensive, they don't last forever, they are much better than hand sanding.
I use this flexible shaft bit. You are not going to use it to drill through bricks, but I found it extremely useful when drilling holes to install blinds.
I have had good luck with the Neiko Close quarter drill .
One word of advise, those sanding pads tend to heat up and melt the Velcro on the back, making them useless after that (learned the hard way). So take it slow and let it cool often.
Dewalt makes two attachments you could look at.
This is their impact driver rated right angle attachment. I use mine fairly often on the job, and it's held up to hard use, including running 1" spade bits with my impact driver. It's not something I use often but it can really get you out of a jamb.
They also make this flex shaft one, but I don't own one so can't personally comment on its toughness. It looks lighter duty but it would fit into even tighter or awkward spots.
might as well go for the whole drill
https://www.amazon.com/Neiko-10529A-Quarter-55-Degree-Variable/dp/B000XUHA8C/
I got one for less than that at biglots but biglots isn't what it use to be.. but they work well
If you have a rental center near you, see if they have a 1/2" right angle drill. I can get one for ~$10/day. That and a stubby auger bit will make it almost fun.
http://www.amazon.com/Milwaukee-3107-6-2-Inch-Right-D-Handle/dp/B0000223HJ
Might be able to get something like this at your local hardware store:
https://www.amazon.com/KKmoon-0-8-10mm-Extension-Professional-Attachment/dp/B06XHDNF7Q/ref=sr_1_3?keywords=90+degree+drill+chuck&qid=1555080687&s=gateway&sr=8-3
If you have the kind of drill bit, a spade bit, that can fit into this product, which is partly magnetic, this may be the way to go.
https://www.amazon.com/DEWALT-DWARAFS-Right-Angle-Shaft/dp/B013UBXU3E/ref=pd_rhf_dp_s_cp_1?ie=UTF8&pd_rd_i=B013UBXU3E&pd_rd_r=1HAAX7CDNV96NB9ZEWCR&pd_rd_w=cPlph&pd_rd_wg=7GgcP&psc=1&refRID=1HAAX7CDNV96NB9ZEWCR
Those are big holes. I wouldn't even attempt that with a standard cordless drill no matter who the manufacturer.
With that said: https://www.amazon.com/Milwaukee-2709-22-Super-Right-Angle/dp/B017Y7V2PI
Wold work nicely, specifically calls out 2 9/16" holes
First of all, verify what you read on the Internet.
https://www.amazon.com/Leviton-5325-WMP-Receptacle-Residential-Grounding/dp/B00004YUK7/ref=sr_1_5?keywords=15+amp+outlet&qid=1574817247&sr=8-5
If 12 gauge wire, you can buy either 20 amp or 15 amp
https://www.amazon.com/Leviton-T5825-W-Resistant-Receptacle-Residential/dp/B003F77RS8/ref=sr_1_9?keywords=20+amp+outlet&qid=1574817295&sr=8-9
https://www.amazon.com/DEWALT-Adapter-DWARA050-Version-Retail/dp/B00FI6RGIU/ref=sr_1_9?keywords=angle+drill+adapter&qid=1574817336&sr=8-9
You can buy a drywall knife to cut the drywall
Use a hammer to start the screws by hammering them partially in like nails, then use a socket wrench and a 1/4" socket with a screw bit in it to drive the screws all the way home.
If you don't have a socket wrench, it can also be done with a pair of large pliers and lots and lots of patience.
Also DeWalt (and others) makes a right angle attachment for drills for just this useage case.
https://www.amazon.com/DEWALT-Right-Angle-Attachment-Impact/dp/B07NQS465R
If I was to go budget this is where I would go
https://smile.amazon.com/PORTER-CABLE-PCCK604L2-Lithium-2-Tool-Combo/dp/B00INRZ5VG/ref=sr_1_7?s=hi&ie=UTF8&qid=1496965612&sr=1-7&keywords=cordless+drill
a coworker has run this set for over 2 years now
https://www.amazon.com/Makita-B-34833-8-Inch-Adapter-9-Piece/dp/B00DR4G7BM
,
https://www.amazon.com/DEWALT-Adapter-DWARA050-Version-Retail/dp/B00FI6RGIU
The makita sockets also come in metric and the dewalt is 20 at Home Depot, all available at Home Depot
At my house we have a horizontal 2x4 as well and the way we got around it is to make a small hole right above or below the horizontal beam then use a 90 degree drill bit tool thingy and drill a small hole through the beam. Then when you drop the cable from the attic down, one person can look through the dry wall hole and navigate the cable through the hole in the beam.
Edit: this:
https://www.amazon.com/DEWALT-DWARAFS-Right-Angle-Shaft/dp/B013UBXU3E/
Or this:
https://www.amazon.com/DEWALT-DWARA100-Right-Angle-Attachment/dp/B00C0VSNKQ
Hole Hawg.
Maybe not this exact model, but a 90 degree screwdriver allows you to adjust mixture screws on the bottom of carbs without removing the whole assembly or trying to get just a flathead tip in there and dropping it repeatedly.
http://www.amazon.com/gp/aw/d/B0039Q1FH4?pc_redir=1412262569&robot_redir=1#
Here is the one I use. Get the kit with the two batteries, as they are about $30 apiece. http://www.amazon.com/Bare-Tool-Milwaukee-2415-20-12-Volt-Cordless/dp/B002SQK996?ie=UTF8&keywords=milwaukee%20drill&qid=1462830139&ref_=sr_1_41&s=power-hand-tools&sr=1-41
I've used mine for about three years - no problems and having two batteries means you always have power for it.
This is the drill I have at home.
I bought mine at Lowe's but they only seem to carry the bare tool. I only had one issue and that was the chuck was defective & the gears stripped out after 6 months. Called dewalt up and they sent me a new chuck with no hassle. Other option was sending the tool to a repair center. That was over 2 years ago and haven't had a problem since.
https://www.amazon.com/gp/aw/d/B0052MII3C?vs=1