Reddit mentions: The best power scroll saws
We found 17 Reddit comments discussing the best power scroll saws. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. WEN 3920 16-Inch Two-Direction Variable Speed Scroll Saw with Flexible LED Light
- Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
- Variable speed goes from 400 to 1600 strokes per minute ; Motor : 120Volts, 60 Hz, 1.2Amps
- Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
- Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
- Features a cast iron base, air pump, flex light, dust port, foot lock clamp, onboard storage, and three blades
Features:
Specs:
Color | Black |
Height | 13 Inches |
Length | 24 Inches |
Number of items | 1 |
Size | Tooled Blade Changes |
Weight | 26 Pounds |
Width | 11 Inches |
2. Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories – RK7323
Portable tabletop saw sets up in seconds to cut wood, metal, tile, aluminum and plastic – performs rip, scroll, miter, and inside cutsCompact and portable with built-in tabletop handle to carry anywhere – weighs in at less than 15 pounds. No-Load Speed - 3000/minute. The Bladerunner X2 cuts a...
Specs:
Height | 8.3 Inches |
Length | 17.5 Inches |
Number of items | 1 |
Weight | 17 Pounds |
Width | 16.1 Inches |
3. Delta Power Tools 40-694 20 In. Variable Speed Scroll Saw
- Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
- Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
- Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
- Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
- On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility
- On-tool blade storage area provides neat, organized protection for scroll saw blades, includes 2 straight blades
Features:
Specs:
Height | 13 Inches |
Length | 30 Inches |
Number of items | 1 |
Weight | 60 Pounds |
Width | 20 Inches |
4. Proxxon 37088 Scroll Saw DS 115/E, Colors may Vary
- Blade guide equipped with integrated blower to keep project parts clean and visible
- Vacuum cleaner adapter keeps work area clean
- Electronically controlled stroke rate 150-2500 strokes per minute for precision cuts on different materials
- Color of saw and adjustable head may vary in shade of green or gold
Features:
Specs:
Color | Green |
Weight | 2.55 Pounds |
5. Dremel MS20-01 Moto-Saw Variable Speed Compact Scroll Saw Kit
Dust port adapter keeps line-of-sight clear and work space cleanAuto tensioning quick-change mechanism for easy accessory change and optimal blade tensioningDetachable coping function for handheld use to take the tool to the work pieceVariable-speed control for optimal cutting in a variety of materi...
Specs:
Color | Gray |
Height | 4.75 Inches |
Length | 18.5 Inches |
Number of items | 1 |
Release date | January 2013 |
Weight | 9.09186368488 Pounds |
Width | 14.5 Inches |
6. GENERAL INTERNATIONAL 16" Scroll Saw - 1.2A Variable Speed Woodworking Saw with LED Light & Flexible Shaft - BT8007
- PRECISION CUTTING - Up-front dial allows setting the exact cutting speed choice for processing different materials, Cast aluminum work table tilts 0° to 45° left with up-front locking knob and bevel scale
- INNOVATIVE DESIGN - "First to market" and design Flex-neck LED work light, Patented blade holder accepts both standard 5 in. pin-end or plain-end (pinless) scroll saw blades, Side storage compartment on the housing for spare blades and wrenches
- KEEP THE JOBSITE CLEAN & SAFE - Saw dust collection port for standard 1-1/4 in. hose, Saw dust blower keeps the cut line clear. Safety on/off switch wth removable security key: 2 pinned blades, 3mm blade change T-style hex key, 4 mm adjustment hex key
- HIGH-POWERED CUTTING - 144 Watt, 120V~60Hz, Amp: 1.2, No-load Variable Speed: 400-1600rpm, Easy access motor brushes
- CUTTING FEATURES - Max. cutting capacity (throat depth): 16 in., Max. cutting thickness: >2 in. at 90°, Stroke Length: 5/8 in.
Features:
Specs:
Color | CUTTING FEATURES - Max cutting capacity (throat depth): 16 in, Max cutting thickness: >2 in at 90°, Stroke Length: 5/8 in |
Height | 13 Inches |
Length | 25 Inches |
Number of items | 1 |
Weight | 24 Pounds |
Width | 12 Inches |
🎓 Reddit experts on power scroll saws
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where power scroll saws are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Excalibur and Dewalt are top notch saws, and I have 100's of hours on both saws. They are both manufactured and designed by the same company, and are essentially the same saw. The Excalibur I used was the big one, and it was a sweet saw. However, when it came time to buy my own, I bought the [Delta saw](
http://www.amazon.com/Delta-40-694-20-Inch-Variable-Scroll/dp/B00IK8DIU8/ref=sr_1_1?ie=UTF8&qid=1397186482&sr=8-1&keywords=delta+scroll+saw); it's essentially the same design as the Dewalt and Excalibur, except it has a few added features like a locking upper arm, a lamp, on board blade storage, and a better on/off configuration. However, I would just look for the best deal on any of those saws and you'll be happy with your purchase.
If you're going to use this seriously, I highly suggest not getting a budget saw - you'll only frustrate yourself with heavy vibration and lengthy blade change times. The excalibur-type saws excel in quick blade changes and threading, whereas the cheaper saws tend to utilize allen keys and require large holes to pass the blade assembly through.
I bought the saw on Amazon, unfortunately it's currently sold out. Keep an eye on it though, I got it for only $81.92!
It was most definitely safe! It's a great starter tool. Check this tutorial video. If young George can do it, you can do it!
Good luck!
I'll check that out. I don't have a jointer (has to google that) or a table saw though. So I'm hoping to buy the right thickness at least for now. My tool selection is pretty limited, I've got a ridgid worm saw and a Rockwell Blade Runner which is handy for a lot of little stuff. I'm hoping I can accomplish my little shelves with just it. Oh and a dremel with a lot of handy attachments.. You can do a lot with a dremel!
Hey, guys. I'm gonna be laying down some laminate flooring in my daughter's room, and I would like to have a scroll saw to help me cut the boards. I'm a newbie when it comes to woodworking, and I saw these two:
https://www.amazon.com/dp/B005UKGL58/
https://www.amazon.com/dp/B00L47FZ8A/
Do any of you have experience with either of these? Is there something else you would recommend?
Thanks!
Try the WEN 16 Inch Scroll Saw. I got it off of Woot a few months back and it has been great so far.
I've been using my scrollsaw to make some automata(will be finishing up a couple soon that I can post!) and I have been following this guys blog who makes them. Every once in a while he posts miniature powertools meant for more smaller projects. here is the scrollsaw http://www.amazon.com/Proxxon-37088-Scroll-Colors-Vary/dp/B0017NUBMQ
Although I agree with daves, would make most sense to buy second hand to see if you want to invest the extra.
I personally have not used that brand though. I already had a saw when I found out about them.
Check out this one.
Also I'd recommend for your next one to use some sandpaper to really smooth it out and use a separate primer. It'll help hide the wood grain.
If you are trying to cut intricate shapes you probably want to use a coping saw if you are doing it by hand or maybe a jigsaw if you want a power tool.
If you are going to be doing a lot of cutting small shapes going forward you might even want to look at a bandsaw or a scroll saw.
I can't help you with the Dremel tip (since I'm not that guy) but I'll just note that if you live in the US you can get a scroll saw on Amazon for not much more than a Dremel (or less, depending on which Dremel you're looking at). This is what I used.
I vote the Scroll Saw! - $91.05
If you are thinking about cutting small items (e.g. crosses) out of wood, look at getting a scroll saw. These are among the best tools for precision cutting small wood objects. The blades are small and can cut very tight curves. And, you can drill a hole in the middle of your workpiece, insert the blade through that hole and cut from the inside. Very handy. Example video!
If it is this model, it uses standard T-shank jig saw blades.
https://www.amazon.com/Rockwell-BladeRunner-Portable-Tabletop-Accessories/dp/B00L47FZ8A
Any manufacturer's T-shank blades should work. It is a universal standard.
...and this $100 "like new" 16 inch scroll saw:
https://sfbay.craigslist.org/eby/tls/5669993031.html
You can buy a highly rated one brand new for $80:
https://www.amazon.com/WEN-3920-16-inch-Variable-Flexible/dp/B005UKGL58/ref=sr_1_1?ie=UTF8&qid=1468553735&sr=8-1&keywords=scroll+saw
Amazon Link
$90 General International BT8007 16" 1.2A Variable Scroll Saw, Red, Black & Gray https://www.amazon.com/dp/B015R40F6W/ref=cm_sw_r_cp_api_i_EP8wDb51XX1VB