Reddit mentions: The best sculpture modelling tools
We found 36 Reddit comments discussing the best sculpture modelling tools. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 21 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Amtech R0330 Wax Carving Set,12pc
- Made From Stainless Steel
- 24 Assorted Heads
- With Handy Storage Pouch
Features:
Specs:
Color | Transparent |
Height | 0.393700787 Inches |
Length | 9.055118101 Inches |
Weight | 0.6172943336 Pounds |
Width | 7.87401574 Inches |
Release date | March 2018 |
Size | us:one size |
Number of items | 10 |
2. Modelcraft Precision Craft Knife Set (16pcs), 16 Piece, Silver
Set includes quality #1, #2 & #5 handles, 5 x blades for #1 handle, 8 x blades for #2 & 5 handleThis excellent set comes complete with a choice of 3 knife handles & 13 various bladesIdeal for hobby,craft as well as professional tasksThe knives can perform fine angle cuts & precise trimming, cutting,...
Specs:
Color | Silver |
Height | 8.8582677075 Inches |
Length | 7.7165354252 Inches |
Width | 0.9842519675 Inches |
Release date | March 2014 |
Size | 16 piece |
Number of items | 1 |
3. Kemper Tools Professional Needle Tool,Silver
- Kemper tools has made handcrafted sculpture tools in the USA for over 50 years
- Functional and well-constructed
- Made by master craftsmen
- Kemper stands for quality tools and service at affordable prices
- For the professional artist
Features:
Specs:
Color | Silver |
Height | 0.46 Inches |
Length | 9.01 Inches |
Width | 1.96 Inches |
4. HTS 156W1 12Pc Stainless Steel Wax & Clay Carving Set
100% stainless steel constructionEasy to clean, can last a lifetimeKnurled handles provide excellent grip, even with wet handsAll tools are double endedTools vary in length between 5.5" - 6.5"
Specs:
Weight | 0.44 Pounds |
5. 10PCS Dotting Tools Set for Nail Art, Embossing Stylus for Painting
- Material: All The Balls Made Of Stainless Steel, Acrylic Colorful Handle (5PCS) And Wooden Handle (5PCS).
- Total 20 Ball Ends 10 Different Diameters: 3/2.6/2.5/2.1/2/1.6/1.5/1.2/1/0.9 MM
- Length 5.1 Inches, Lightweight And Easy To Use.
- Double-Sided: Each Nail Art Dotting Tools With 2 Different Ends. Convenient For You To Do Different Crafts And Can Satisfy Your Different Needs
- Widely Use For Nail Art, Embossing, Making Dots, Natural Nails, False Nails, Acrylic Nails Etc.
Features:
Specs:
Height | 0.51 Inches |
Length | 5.98 Inches |
Width | 5 Inches |
6. Kare & Kind Smart Dough Tools Kit with Models and Molds (Set of 24 Pieces)
- Dough Tools Kit: 24 pieces in one set (Cutouts (Flower, People, Animals, shapes) and Dough Tools).
- Perfect for creative play with Easy-grip, Great for Hours of fun.
- Created by experts for use at home or classrooms; Enrich a child's imagination. Ideal for early learning classrooms or daycares
- Exceptional quality and value. These sets are great for adding detail to dough creations.
- Bonding clay is not included.With Kare and Kind retail packaging.
Features:
Specs:
Color | Assorted |
Height | 2.4 Inches |
Length | 7.5 Inches |
Weight | 0.02 Pounds |
Width | 4.9 Inches |
Size | Animals |
7. Bench Universal Work Holder
Holds odd shapes and smaller components for painting, filling, engraving, sawing & shaping8 steel pins can be placed anywhere on the had to accommodate various shapesIdeal for bending and forming wireHead can be removed from base and fitted to a bench viceWeight 504g
Specs:
Color | Silver |
Height | 3.74 Inches |
Length | 6.89 Inches |
Weight | 1 Pounds |
Width | 1.97 Inches |
Release date | May 2014 |
8. Vktech 10PCS Wooden Clay Sculpture Knife Pottery Sharpen Modeling Tools Set (10PCS Wooden)
- Length: Approx. 14.5-15.6cm
- Material: Wood
- Consists of 10 double ended tools
- The curved end contours delicate features.
- Wooden Clay Sculpture knife
Features:
Specs:
Color | 10pcs Wooden |
Weight | 0.06834330122 Pounds |
9. Kbsing Set of 5 Flexible Silicone Clay Sculpture Color Shapers Tools Brushes (#0)
- Set of 5 different soft head shapes
- Great for oil painting, pastel scrubbing and clay sculpture
- Soft Silicon head will not absorb the material
- Easy to clean
- Cup Chisel;Taper Point;Flat Chisel; Cup Round;Angle Chisel
Features:
Specs:
Height | 0.4 Inches |
Length | 8 Inches |
Weight | 0.02 Pounds |
Width | 2.2 Inches |
Size | #0 |
10. eBoot 11 Pcs Wooden Handle Clay Pottery Sculpting Tools
Double ended tool, wood handle11-piece tool assortment cover all sculpting techniques: carving, cutting, chipping, modelingMaterial: stainless steel; Size: (app)13-19.5 cmSuitable for beginner level pottery and sculpting, create and build any shapes on hand madeConvenient to use on many texture: mal...
Specs:
Height | 0.71 Inches |
Length | 8.7 Inches |
Weight | 0.22 Pounds |
Width | 4.02 Inches |
11. Model Craft Modelcraft Side Cutter
Stainless steel jaws & comfortable insulated gripDesigned for precise nipping and cuttingIdeal for cutting plastic sprues, resin parts & soft metalsClean & accurate cuts, perfect for precise tasksAn essential tool for miniature buiding, crafts and more
Specs:
Color | Yellow |
Height | 0.55 Inches |
Length | 8.98 Inches |
Weight | 0.220462262 Pounds |
Width | 3.07 Inches |
Release date | December 2013 |
Size | pack 1 |
12. Colour Shaper for Encaustic Angle Chisel Extra Firm #0
- The decorator tips have pre-cut slits to add unique texture to a paint surface; use for graining,
- Curve wide tips work like a squeegee; use the sharp edge to carve paint cleanly or to apply super
- Wide flat tips work like a spatula; use it to apply and spread even layers of paint or adhesive;
- Black tips, also known as Clay Shapers, are much firmer and best for sculpting, ceramics, and
- Ivory tips are soft and designed for fluids and soft colors, while grey tips are firm and offer
Features:
Specs:
Height | 0.21 Inches |
Length | 6.31 Inches |
Weight | 0.01 Pounds |
Width | 0.21 Inches |
13. Modelcraft Model Saw, 24cm, Yellow
All-purpose saw set, perfect for precision modelling, conversion, craft, woodwork & shop useComfortable handle holds blades securely, easy to changeSuitable for cutting wood, plastics, resin, foam and more. Cuts quickly, cleanly and efficientlyRange of sizes to suit different tasks, including narrow...
Specs:
Color | Yellow |
Height | 0.55118 Inches |
Length | 9.4488 Inches |
Width | 3.5433 Inches |
Size | 24cm |
Number of items | 1 |
14. Grade 2 Titanium Cap Wax Tool
Made with Grade 2 TitaniumLong Handle with Shovel Tip EndFits Most 10mm, 14mm & 18mm NailsDiameter: 22mmAngled Carb Hole
15. Modelcraft Mouldline Remover and Cleaning Tool for Modelling
- Remove mould lines from your miniatures and sprues for a smooth finish
- Just draw the tool along the mould lines to easily scrape them away
- Perfect for use on plastic, resin and metal war gaming miniatures, photo etch parts and scale models. Excellent for preparing surfaces for undercoating
- Curved edge that removes mould lines easily and safely with precision
- Ergonomic handle with comfortable grip for added control
Features:
Specs:
Color | Blue |
Height | 0.55118 Inches |
Length | 5.9055 Inches |
Width | 0.55118 Inches |
Size | 15cm/5.9in |
Number of items | 1 |
16. HTS Stainless Steel Wax & Clay Sculpting Tool Set
100% stainless steel constructionEasy to clean, can last a lifetimeKnurled handles provide excellent grip, even with wet hands
17. SERONLINE 24pcs Ball Stylus Dotting Tools, Polymer Modeling Clay Sculpting Tools Set Rock Painting Kit for Sculpture Pottery
Package Contains: set of 24pcs pottery modeling tools, including 5pcs wooden clay tools, 5pcs Wooden handle ball stylus, 5pcs rubber pens, 4pcs rubber handle ball stylus, 4pcs plastic stylus, 1pcs pottery sponge.Wood Clay Tools: 1pcs ceramic needle for hooking, 3pcs plastic knives to create complex ...
18. QITOO 4pcs Stainless Steel Wax Clay Sculpting kit Carving Tools Spatula Chisel Halloween Model Make Home DIY Tools
- 100% stainless steel construction
- With a case, easy to storage
- Non-slip handle design
Features:
Specs:
Height | 0.1968503935 Inches |
Length | 7.086614166 Inches |
Width | 0.1968503935 Inches |
19. Meuxan 10 Piece Dotting Tools Ball Styluses for Rock Painting, Pottery Clay Modeling Embossing Art
- Set of 10 for creating fine details, painting, dotting, shaping and smoothing for different craft projects
- Total 20 ball ends, 14 different diameters: 0.8/1/1.5/2/2.5/3/4/6/8/10/11/13/16/18mm
- Ideal for painting dots on rocks, canvas, seashells or gourds, making dots or blending seams in clay, embossing pattern and more
- Length between 4.7-5.3 inches, lightweight and easy to use
- What You Get: Blue Rubber handle ball stylus x 4, Wooden handle dotting tool x 6
Features:
Specs:
Color | Blue, Wooden |
20. Spraycraft 750 ml 1-Piece Air Propellant
Air propellent750mlcan be used with SP10K and SP20kAvailable in 3 sizes SP9500 (500ml) and SP300 (300ml)Ideal for hobby & smaller DIY tasks
Specs:
Color | White |
Weight | 0.44 Pounds |
Release date | May 2014 |
🎓 Reddit experts on sculpture modelling tools
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where sculpture modelling tools are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Make sure you have several bowls for mixing icing colors. You can also use tupperware for this.
Spatulas. The more the better. I got a bunch of tiny ones from Walmart for $1 each that I use to mix icing colors, and bigger ones to scrape down the sides of the mixer. They're super useful.
Sifter. Useful for both powdered sugar and flour. Lumpy icing sucks.
Rolling pin. Standard size. I have a fondant rolling pin, which doesn't have handles, it's just a long plastic cylinder, but I prefer to roll out smaller batches at a time to minimize dough sticking to the rolling surface, so a regular rolling pin works just fine.
The rest is stuff you'll probably need to go to a craft store to get. Or online. I use Amazon a lot.
Parchment paper.
Pastry Bags.
Cellophane Bags. For packaging cookies individually, if you want to do that. You can use different sizes, but these are good for most average cookies.
Rolling Pin Spacers. These suckers are awesome. I use the yellow ones, they're about 1/4" and perfect for rolling out cookies to an even thickness every time.
Needle Tool. This thing is a lifesaver for popping air bubbles and smoothing out icing, but toothpicks work just as well.
As for ingredients, I prefer to get my Meringue Powder online as well.
Americolor gel is the shit. But you can use the Wilton stuff that craft stores sell just as easily. No big deal.
I buy my flour and powdered sugar in bulk at Costco and store it in big plastic tubs. Always get more powdered sugar than you think you'll need; it keeps well, and nothing sucks quite as much as ruining a batch of icing, or running out, and having to stop everything and go to the store for more powdered sugar.
I'm making a batch right now, so if I think of anything else I'll come back and edit this comment. All this stuff was all collected over a period of many months, so don't feel like you have to have all of it now. Just get what you need for the project you're doing, improvise as you can, and catalogue what you think will really help you with the next batch.
Hope that helps! :)
Edit: Was reminded during my decorating this evening: you're gonna need paper towels. So many paper towels.
For nurgly greenstuff there's a few things that will help. Get some metal, not plastic sculpting tools from amazon. You will want something that makes dimples, something shaped like a trowel, something pointy, and something that looks like a spatula for smoothing edges down to the model so the transition is without a seam.
Keep your fingers and the tools damp. As greenstuff starts to dry it will pick up fingerprints or drag. Keeping surfaces damp ensures that you'll keep from ripping.
As greenstuff goes from freshly mixed to hard it slowly starts to harden, making it less pliable as time passes. This can work to your advantage but what I recommend is that you don't mix up a large chunk at once. Mix bits that are marble sized that you can deal with in about 5-10 minutes. If something looks great, stop messing with that spot and return to it in a couple hours after it sets up.
To make depressions, use the tool that looks like a round ball on the end of your tool. To make boils, find something with a nice round hole - I use different parts of pens that have been taken apart. You press down with the opening, making a raised round area with a depression around it, then you press down in a circle around your boil with the spatula tool, or other one for a different effect.
I also would practice before you touch up a knight or other large piece. That Rhino is a great idea. I have found some janky ones on Ebay that are perfect for corruption. I don't mind taking something that looks rough if the idea is to cover it with corruption. Grandfather is pleased with this.
If you're going to convert, take some time to google image search ideas, get a folder together. A herald bell I always thought was very cool on a Nurgle knight.
Greenstuff also makes their own tentacle maker. You could wing it with something home made but its not expensive and with a little practice you can make really great tendrils and corrugated tubes.
Amazon stainless steel sculpting set $11.65
This should do the trick. You can watch the general process of creating a sculpture by watching his other videos. Also searching for polymer clay on google and checking the video section should yield plenty of results.
I myself work with "Super Sculpey Firm", but I'd probably recommend starting with the softer version "Super Sculpey". I highly recommend this tool set or any other similar looking ones that Amazon recommends, you mostly find a favorite tool and use that for 95% of the work. For many years I used to work exclusively with toothpicks to sculpt, before I got the money to spend on tools.
Also, if you haven't already, you can check the Album I mentioned in my comment to see the process of making this exact sculpture. What I didn't capture in the photos, is that the leafs actually have a small wire going through them, to hold them up like that.
YOu can find silicone clay shapers, like these, in small sizes that I find very useful and do most of the detail and smoothing of my clay with those. My small ones have a width on 2mm I think.
I also have steel tools, like these which I use for rougher work. These are really similar to dental tools which are great if you can get a hold of them too.
Of course I have a few very sharp hobby knives with replaceable blades (something like this but I don't know what brand for cutting clay and and making fine detail.
Other than that, I mostly use homemade tools. I have a few sewing needles and pins which are useful for fine detail. I also have a few hyperdermic needles, the end of which is like a tiny, super-sharp blade, for the finest of details.
To make tools with them, I usually drill a small hole into the end of a disposable wooden chopstick and superglue the needle into that. I fill around the edges with milliput to fix it firmly in place.
Trovarion, Redditor and YouTuber, has a cool video on how to make homemade tools, too, that you may find helpful.
Also, there is a whole book by G. Schellert on homemade mini-sculpting tools, but it mat be too in depth for most peoples needs.
Morhty demands:
Akeleie demands:
Super awesome contest! :D
I am a utter novice myself! Never touched polymer clay really until the day before yesterday! Personally I am using this tool set which /u/shawnusaurus got me. It's awesome and while I don't know how to use half of them yet, I don't think my sheep could have been made without it!
I've only used fimo soft really so far but it seems good! Super malleable and easy to use!
My son would really love to have These playdoh tools! His Wishlist is here :) They would really help with his fine motor skills! He loves playdoh and has had to make do with my castoff kitchen gear that is safe for him to use (a giant spatula and a wooden spoon lol) to use with his playdoh!
My funny christmas story is about the year we tried to book a cabin in a ski village and booked via their website. When we arrived, we found that it was not at all a cabin (should have realized when the price as so low) it was instead a crappy strip motel that had 1 cabin attached to it and had used those photos to display the room. So instead of a crackling fire, we had a rattling radiator, and since we didn't have a kitchen, we ate at the Chili's next door. It sounds sad, but it was actually funny because it was just the hubs and me making do with a strange set of circumstances and it made us more in love than ever!
This thing u/randomisation linked me is pretty nifty, I plan to pick one up for myself here soon.
You could get him Winsor and Newton Series 7 or Raphael 8404 sable brushes if he doesn't have some already.
Depends on how much you want to spend really, there are big collection boxes of paints from both Reaper and Vallejo you could get to give him a near complete collection of paints.
Airbrush is an option, there are actually very quiet air compressors, you just have to make sure you get a silent compressor, I use mine in a room directly next to another person through the early AM's without any problems.
Could buy him a wet palette to help keep his paint wet while and after he's painting.
They sell nail polish racks on amazon for like 30 bucks that are great for storing/displaying your paint.
That’s Sculpture Geek’s video, he uses NSP hard. At a certain point he rakes the clay and little pieces fall off. If the clay isn’t hard enough you can’t rake it. I don’t think any clay smells so strong it would leave an odor on fabrics. Roma smells the worst, like sulfur, but it’s probably the closest thing to water based clay. I love working with it but really dislike the sulfur smell. My recommendation is super sculpey. It will always stay workable and if you want to finalize a piece you can bake it in an oven. I’d get the original or medium. Here is a mat you can use. https://www.amazon.com/DAFA-Professional-Self-Healing-Double-Sided-Compatible/dp/B00P6KPKBI/ref=mp_s_a_1_5?keywords=cutting+mat+craft&qid=1558533396&s=gateway&sr=8-5
Here is a set of tools https://www.amazon.com/Vktech-Sculpture-Pottery-Sharpen-Modeling/dp/B00CHH1P9E/ref=mp_s_a_1_11?keywords=sculpting+tools+wood&qid=1558534139&s=gateway&sr=8-11
You can sand down and customize the tools as you like. You can also watch live sculpting on Twitch. https://www.twitch.tv/cnotbusch He’s there almost every day.
Thanks for the advice! Do you have pics of some of the stuff you've done?
I actually just got ahold of some Green Stuff, I've been using extra firm super sculpey, so once it's baked, the only way to take material off is with a file (which I don't have). I'm looking forward to being able to slice off sharp edges for extra detail.
My fingers do a lot of the work, but I have a little clay shaping needle that gets a lot of use as well as a silicon tip paintbrush, which has been amazing for wiping out fingerprints, blending parts together, yadda yadda.
Thank you! that means a lot to me. Simple sculptures are just as nice as complex ones though! If you need help making complex sculptures though, there's a lot of clay tools that help with detailed work. I religiously use clay shapers for every single sculpture I do. Every. Single. One. If youre having trouble with detail work that doesn't just look like flat chicken scratch on the clay, clay shapers help give some subtle depth. Use the tip of the round ones and roll them onto the clay to give depth or blend clay together.
If you're having trouble with keeping proportion symmetrical and correct, I recommend buying a clay conditioning machine. I also use this thing religiously. While sculpting Sans' head, I wanted to keep it very symmetrical. I just flattened out the clay in the conditioning machine and cut out equally sized pieces in it. Placed them on where the bottom jaw was supposed to form gradually while using the clay shaper to blend them in. For the stitches in his hoodie and such I just used a clay needle and drew them in at about a 45 degree angle.
If clay tools still don't help, then I'm sorry to say but all that I know of that can help is practice. When I first picked up clay for a high school class I had to sit and make dozens of 1" human faces out of the Sculpey and it was extremely painstaking practice. That was about 3 years ago and my face sculpting techniques still aren't terrific. But they have improved! If I hadn't sculpted all of those faces (which in my beginning stages couldn't stop becoming old men/women faces, don't know why that kept happening) I wouldn't have been able to sculpt Sans' face the same way I did now.
Try sculpting a ton of faces if you want really rigorous practice! A lot of the techniques sculpting faces apply to other sculpture subjects anyway.
What you have looks great.
For making good wood effects in Popsicle sticks use an X-acto or any other kind of knife and lightly cut the wood vertically, some deep and some shallow cuts, looks great once you paint and dry brush it. For foam you can do the same thing, use a stiff grill brush, or use a little tool that I like to use which can be found Here its the metal tool on the far right. Just scrape that over the foam and instant wood effects.
If you like to dot, two things:
Buy some inexpensive ($6.99) dotting tools (like what is used for nail art) and then check out Rachel’s Rocks on YouTube. She does a number of great tutorials that are easy to follow and then adjust and make your own.
example tutorial for Rachel’s rocks on YouTube
amazon link to dotting tools
As monkeys says, I recently did an Airfix starter set. I was between houses so had very little stuff.
I bought a Airfix Electric English Lightning. If you search for Airfix starter sets you’ll find other options.
I used minimal tools:
You could find some of that grouped into one product if you look about like this.
There’s some good YouTube videos to help a new user like this one from Airfix themselves making their own Spitfire starter kit.
So here’s my album of what I used. And here’s the finished Electric Lightning.
You only need a cutting mat (I use this one), a decent knife (mine again) and a metal ruler. Some designs are intended to be assembled without glue, but some basic paper adhesive can be helpful anyway.
Patience is pretty important; sometimes I rush a cut and it ends up drifting away from the ruler, which has resulted in having to reprint something.
Amazon option:
Modelcraft Saw Set for Modelling and Craft (8 Piece Set) https://www.amazon.co.uk/dp/B07FXVX2W8/ref=cm_sw_r_cp_apa_i_am56CbXMM59VQ
Edit:
Forgot to say, these are what I use! They go through old metal minis with ease so plastic will be simple.
Any two-part epoxy with a smooth finish can work. Kneadatite from Polymeric Systems is what most people end up using; usually referred to as Greenstuff. You can order it online through Amazon or find it at most hobby stores that carry miniatures. I use Polymeric's QuikPlastik because it's cheaper and available at larger DIY stores. Milliput is also a popular choice.
Any way you go, be careful to mix it thoroughly and not to use too much. While you can trim it back with a sharp knife, it's easier to add more if you need to. You may also want to get some sculpting tools or dental picks to shape the putty and sculpt details into it. Then you can use it to repair damaged models, fill in gaps in larger metal pieces, and even to make custom parts.
no prob bro.
this is the same style that i have, they are sooo perfect. i’ve been smoking dabs for like 4-5 years and have NEVER had to replace it.
Grade 2 Titanium Cap Wax Tool https://www.amazon.com/dp/B07JW215VZ/ref=cm_sw_r_cp_api_i_7M3oDb09AG24M
I used a recipe from Montreal Confections on Youtube.
Royal Icing Recipe:
Note that this recipe makes quite a bit of icing. I made a large batch of cookies (50 or so cookies) and I had more than enough. You may want to cut the recipe in half.
She also has another video on how to get correct consistency.
I worked with mine until I got close to a "20 second icing" so I could pipe and flood with the same icing.
Also, I highly recommend purchasing a scribe needle tool to smooth out the icing.
well in that case a quick amazon search for 'moldline removal tool' found this
I started by using a plastic fork, until it was time to up my model making game and I purchased a set of Amtech tools. Not the best quality, but they work really well for the price that I paid.
Here are the ones that I purchased: https://www.amazon.co.uk/Piece-Stainless-Steel-Wax-Carving/dp/B000V6MTDO/ref=sr_1_fkmr0_1?ie=UTF8&qid=1493756622&sr=8-1-fkmr0&keywords=clay+moulding+tools+amtech
I have these, these, and something like this and this. Head down to your local ace and pick up some dowels or a drill set of varying sizes for rolling.
They're for doing art work on nails when painting them
Edit: like these https://www.amazon.com/10PCS-Dotting-Embossing-Stylus-Painting/dp/B07BQMMZJP/ref=mp_s_a_1_7?ie=UTF8&qid=1541420098&sr=8-7&pi=AC_SX236_SY340_FMwebp_QL65&keywords=nail+art+tools&dpPl=1&dpID=413SRNsYX9L&ref=plSrch
No problem. :)
I'd recommend these too if you wanna get finer details in.
I'd also invest in some fine grain sand paper.
You totally need to invest on 2 playdoh kits http://www.amazon.com/gp/product/B00B7YPK76/
My kid uses them at therapy, they are pretty spiffy. As long as the mess stays in school or therapy - I'll supply them.
I used sculpey clay and sculpted it over a pbt cap and it hardens in the oven (don't use ABS plastic or it might melt). And just some basic clay sculpting tools from Amazon. https://www.amazon.com/gp/product/B0776SN7Y5/ref=ox_sc_act_title_7?smid=A18KJ1DUGA3EYY&psc=1
Here's an example set. The photos show some of the many possible uses.
SE DD312 12-Piece Stainless Steel Wax Carvers Set https://www.amazon.com/dp/B000SVRSRY/ref=cm_sw_r_cp_apa_i_GAPFDbPW0RSP7
Apoxie Sculpt 1 lb. White, 2 Part Modeling Compound (A & B) https://www.amazon.com/dp/B0013UDWXI/ref=cm_sw_r_cp_apa_i_9APFDb4BZREHF
Sand Detailer Finishing Kit, Finer Grits, 24 piece https://www.amazon.com/dp/B0039ZCQAK/ref=cm_sw_r_cp_apa_i_BCPFDbBV5SSGW
SERONLINE 24pcs Ball Stylus Dotting Tools, Polymer Modeling Clay Sculpting Tools Set Rock Painting Kit for Sculpture Pottery https://www.amazon.com/dp/B0776SN7Y5/ref=cm_sw_r_cp_apa_i_JDPFDbTH56VM0
Monster Clay Premium Grade Modeling Clay (5lb) https://www.amazon.com/dp/B0722NKKYF/ref=cm_sw_r_cp_apa_i_dEPFDb1WPY7K2
https://www.amazon.com/10PCS-Dotting-Embossing-Stylus-Painting/dp/B07BQMMZJP
Third one
Wax Carving/Modeling Tools
I actually use one of these bad boys. http://www.amazon.com/Kemper-Tools-Professional-Needle-Tool/dp/B0023ATIM6 It's great for getting into tight places, or working out beads if you mess up.