Reddit mentions: The best agricultural & construction machinery
We found 30 Reddit comments discussing the best agricultural & construction machinery. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 23 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Lasagna Gardening: A New Layering System for Bountiful Gardens: No Digging, No Tilling, No Weeding, No Kidding!
- gardening
Features:
Specs:
Color | Multicolor |
Height | 9.17 Inches |
Length | 7.5 Inches |
Weight | 0.80027801106 Pounds |
Width | 0.675 Inches |
Release date | November 1998 |
Number of items | 1 |
2. Seymour 21306 AU-S6 Iwan Auger with Hardwood Handle, 6" Diameter
- It is designed for general purpose use in a variety of soils
- Steel blade is riveted to tough pliable iron yoke
- Has a steel shaft with a welded steel t-handle
- 6" Point spread
- Made in USA
Features:
Specs:
Color | 0 |
Height | 5 Inches |
Length | 11 Inches |
Weight | 8.41 Pounds |
Width | 11 Inches |
Size | 6" Point Spread Head |
Number of items | 1 |
4. John Deere Original Equipment Arm #AM120681
John Deere Original Equipment Mower Deck Arm AM120681. Diameter measures: 7/8"Fits certain serial numbers of model 54C and 62C. (Serial # 040001 - 090000).This is a genuine John Deere part.Thanks for looking!
Specs:
Height | 4 Inches |
Length | 7 Inches |
Weight | 1.9 Pounds |
Width | 6 Inches |
5. GOJO Natural Orange Hand Cleaner with Pumice, 14 oz Squeeze Bottle
- 10 ft Black cord protector conceals Cables cords and wires laying on the ground or floor
- Three channel Cable cover fits 3-5 cords depending on thickness
- Protects against tripping hazards in Walkways including doorways Sidewalks or Offices
- High quality material created to function like rubber but will unroll easily and can be cut for a custom fit
- Dimensions (LxWxH) 10 ft x 3 2 in x 0 75 in 1-year manufacturer
Features:
Specs:
Weight | 0.875 Pounds |
6. Hammer Type Crimp Tool
- Please read descriptions carefully before ordering.
Features:
Specs:
Weight | 1.83 Pounds |
Number of items | 1 |
7. All States Ag Parts Red Rooster Avocado Pole Picker Replacement Head
An avocado picker head with nylon bagFits any type pole (wood or fiberglass)Blade with pull rope (included) clips fruit and it drops into bagPicker Head Only (Pole and screws not included)
Specs:
Height | 6.75 Inches |
Length | 16.5 Inches |
Weight | 10 Pounds |
Width | 6.25 Inches |
Number of items | 1 |
8. Scotts GRO Water Sensor Starter Kit
Includes the Gro Hub and One Water SensorUses custom watering algorithm based on plant's specific needsSaves time vs. hand-wateringFor any plant - outdoor and indoorAccess from anywhere via mobile appTake the guesswork out of watering with smart soil moisture sensorEasy to set up and move aroundCont...
Specs:
Height | 11.56 Inches |
Length | 3.31 Inches |
Weight | 2.27 Pounds |
Width | 6.75 Inches |
Size | NA |
Number of items | 1 |
9. Nupla PRB5T 69403 Classic-T 5' Soil Probe with Metal Tip, 1/2" Nuplaglas Shaft, EC Grip, 60" Long Handle
Nupla classic handles feature proprietary super duty nuplaglas for exceptional strengthNupla classic handles provide safety and durability for the toughest industrial/contractor jobs60" x 1/2" Diameter classic shaft with metal tip13-1/4" x 1/2" Classic T-handle
Specs:
Height | 1.28 Inches |
Length | 60.75 Inches |
Weight | 1.73 Pounds |
Width | 13.38 Inches |
Number of items | 1 |
10. GrowBright 6-Inch CleanFlow HEPA Filter
- High-efficiency particulate arrestance (HEPA) filter for 6" round duct/flange air intakes
- Blocks 99.97% of particles at .3 micrometers while providing excellent airflow
- Features easy-install rubberized collar with steel clamp for a proper seal
- Recommended for use with high-velocity inline fans / blowers - may create too much restriction for small duct fan types
- Measures (max): 9.25" long x 8.125" diameter, 6" female flange
Features:
Specs:
Size | 1 Count (Pack of 1) |
11. Heavy Duty Bulb and Bedding Plant Auger 28 In. Long by 2.75 In. Diam.
- 28" length, a real back saver. No bending over to dig.
- Strong tool steel construction, built to last.
- Easily dig through most soil types even clay and rocky soil.
- Plant a few or hundreds of bulbs and plants faster than ever before.
- Fits most any drill, and works well on a cordless drill.
Features:
12. 29x21" Air Cooled Tube Reflector Hood for 250w 400w 600w 1000 watt HPS MH Tent
- Lamp compatibility: MH/HPS 250W/400W/600W/1000W
- Pre-installed ceramic E39 mogul socket
- Industry standard S-plug
- 15-ft. heavy duty wire cord
- Dimension: 6" x 24" (assembled)
Features:
13. Iwan Post Hole Auger - 8 Inch Diameter
- High carbon steel blades, riveted to malleable iron yoke
- High strength steel shaft with welded steel tee
- Hardwood cross handle
- Overall length of 46 inches
- 8-inch diameter
Features:
Specs:
Weight | 7 Pounds |
14. BephaMart 40x40MM Thermoelectric Power Generator Peltier Module TEG High Temperature 150 Degree Shipped and Sold by BephaMart
- Feature: Colding side posts with the words
- Heating side is empty Red wire to positive, black wire to the negative, it generate electricity when the temperature difference happened
Features:
Specs:
Height | 2 Inches |
Length | 2 Inches |
Weight | 0.220462262 Pounds |
Width | 2 Inches |
Size | Small |
Number of items | 1 |
15. DIY Water Well Kit, includes water well hand pump, auger, well screen & cap
DIY Water Well Kit
Specs:
Height | 11 Inches |
Length | 50 Inches |
Weight | 37 Pounds |
Width | 11 Inches |
16. Briggs and Stratton 12S432-0036-F8 900 Series Intek I/C 205cc 9.00 Gross Torque Engine with a 3/4-Inch Diameter by 2-27/64-Inch Length Crankshaft, Keyway, and 5/16-24 Tapped
- Dura-Bore cast iron cylinder sleeve for extended life
- Float carburetor for consistent, easy starting
- Maintenance-free Magnetron electronic ignition for quick, dependable starts
- Overhead valve design (OHV) for cooler operation and longer valve life
- Emission compliant - for sale in all 50-states
Features:
Specs:
Height | 16 Inches |
Length | 12.375 Inches |
Weight | 20 Pounds |
Width | 17 Inches |
Number of items | 1 |
17. NorTrac 25XT 25 HP 4WD Tractor with Front End Loader & Backhoe - with Turf Tires
- Feature: Colding side posts with the words
- Heating side is empty Red wire to positive, black wire to the negative, it generate electricity when the temperature difference happened
Features:
Specs:
Weight | 4908 Pounds |
Size | 25 |
18. Sickle Bar Rock Guard 7/16" - Fits Ford Fits New Holland 44 45 46 47 450 451 455 456 501 502 505 507
- Replaces Part Number: 144176
- Stock Varies By Warehouse - Please Reference The Estimated Delivery Time For Our Most Accurate Shipp
- We Provide Oem Numbers As A Reference For Customers When Ordering. Please Verify Fit By Cross-Refere
- We Offer Free Shipping Store-Wide On Any Products Other Than Glass, Decals, Spray Paints, and Seats.
- Please Note That Some Listings Use Stock Images As A Reference For Customers.
Features:
Specs:
Height | 5 Inches |
Length | 5 Inches |
Weight | 1.43 Pounds |
Width | 5 Inches |
Number of items | 1 |
19. 50 of Replacement JD Cotton Picker Spindle Assembly RH Farmer Bob's Parts AN274217
- The imprinted "Z" on these spindles were replaced with an "R" for branding reasons. 7260, 7660, 7760, 9900, 9910, 9920, 9930, 9935,9940, 9950, 9960, 9965, 9970, 9976, 9986, 9996, CP20, CP690. Also fits Pro 12, Pro 12VSR, & Pro 16
- AN274217 & AN195083
- Spindle
Features:
Specs:
Height | 1 Inches |
Length | 8 Inches |
Weight | 20 Pounds |
Width | 8 Inches |
Number of items | 50 |
20. Earthquake 9800K 2-Person Earth Auger Powerhead with 173cc 4-Cycle Kohler Engine (CARB Compliant)
RELIABLE: The proven Kohler engine delivers 232 ft-lbs output torque, plenty of power for your toughest digs.DURABLE: The 9800 series ball-bearing alloy-gear drive transmission is super tough and long-lasting.TOUGH: The Kohler Engine is protected with welded steel cage that surrounds the unit, desig...
🎓 Reddit experts on agricultural & construction machinery
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where agricultural & construction machinery are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
This is an amazing book for learning what can fit where. Remember that it is more for advanced gardeners so start small. Use it as a guide on long term plans.
This is a great guide to low-cost or free soil creation/amendment It also has a great guide to growing almost every veggie/herb. It works amazingly as a substitution for the very expensive recommended soil in This great guide to planting closer together to avoid weeds
Some ideas for reducing water usage:
Sub-Irrigation (there are a great many ways to do this, this is just one)
Hugelkultur Looks like shit but creates an amazing wood "sponge" under your gardens. After 2 years you pretty much don't need to water again (if done correctly). You also get a constant stream of nutrients from the wood breaking down. It is possible to "contain" hugelkultur beds to create more of a "I mean to do this!" order so people don't think you are just piling shit up everywhere.
Definitely agree. The first year, I'd start the herbs and get some compost going, if you can. For your compost, make use of whatever is locally available in quantity (eg, grass, leaves, food scraps, kelp, pond scum). This website is a good resource.
I started out using the Square Foot Gardening plan with raised beds and had good success. Now I've added some lasagna beds, as I think this method is more environmentally friendly and sustainable (and easy!). (Mel's Mix uses peat moss, which isn't sustainably harvested, is my quibble.) I'd say whatever you do, don't bother tilling anything. Is a waste of time, IMO. No-till is where it's at. Lasagna Gardening by Patricia Lanza is worth reading if you're interested in this method.
In looking at the diagram, 11-20 makes up only one of the 4 caster systems on this deck. The other 3 are made up of (8,) 9, 10 and 13. The part number 13 is what I have multiple kits of because it is the service kit for all casters. The bushing number 14 is common only in the one with the bolt running clear through the system. However, that bolt is only running through a piece of plate steel about 1/4" thick. If I drill through number 8 and the two 9's on the other three, the bolt will need to be much longer. I would guess an M8 x 100 since the one on the plate steel is a 70 mm carriage type bolt. Do you think that will be strong enough? Should I be looking at a certain strength of bolt? Shouldn't that bolt be tack welded so it doesn't spin just like the carriage bolt number 11?
edit: I would need two of these https://www.amazon.com/John-Deere-Original-Equipment-AM120681/dp/B00CAXE6G4 and one of these https://www.amazon.com/John-Deere-Original-Equipment-AM120680/dp/B00CSBRZUW to repair this deck properly. $125 is just too much. Screw that...
The problem is that your hands are greasy afterwards, so what you need is a really good degreasing hand cleaner. Get some Gojo or Fast Orange, it's what most mechanics use to get automotive grease off of their hands, and it can be used without water. It's a thick paste with pumice particles in it to help rub off oils and grease, so just rub it into your hands and then wipe off with a towel. I keep a bottle of Gojo in my bag right next to the sunscreen and it works super well.
The wire.
Crimping tool.
Wire terminal lugs.
Battery Terminals.
Ask you shall receive, or, let me google that for you! :) I know that feeling when you don't have an experienced person to show you the ropes. All of this I learned from a week of reading and looking at everything I could concerning the matter. Sometimes there is no-one to show you what to do and you have to figure it out. It's not easy, but it is really satisfying. EDIT man that sounded really preachy... sorry about that, came from a good place :P hehe
Last fall, I read Lasagna Gardening (http://www.amazon.com/Lasagna-Gardening-Layering-Bountiful-Gardens/dp/0875969623/ref=sr_1_1?ie=UTF8&qid=1310442283&sr=8-1).
As I recall, the author recommended the following:
Digging to loosen the soil seems unnecessary as the ground will loosen as the straw decomposes. So far, I've created an environment that my plants seem to be loving.
I've also found this to be extremely useful for filling raised beds.
Sure you can probably use it for a lot of things depending on how brave you are. But that looks like a specialized tool like this one:
https://www.amazon.com/Avocado-Picker-Head-AVOCADO-PICKER/dp/B000AYE1Z6
Just chiming in, I have had to dig a bunch lately for deck/fence projects. I got this hand auger and it's awesome. Costs less than renting one for a day and perfect for small'ish jobs. http://www.amazon.com/Seymour-Mfg-AU-S6-Post-Auger/dp/B00002N8OK/
Check out the blumat stuff if it's just water and no nutrients, these seem to be a simple setup. I use a floraflex bubbler, subsurface drippers, a pump, and a timer. This gives me about 3 or 4 days on autopilot, but it's the exact opposite of an easy setup.
Edit: If you're just looking for a sensor I've heard these work good
https://www.amazon.com/Scotts-GRO-Water-Sensor-Starter/dp/B0758GY595
You need a probe rod. I like to use fiberglass because if you hit an electrical line, you’re less likely to be seriously injured or killed. Here’s a link to the one I use: https://www.amazon.com/dp/B004N851N6/ref=cm_sw_r_cp_api_NPXZBbRZMEM37
You’ll want one that’s at least five feet long to probe out the drain field. Before putting any tools in the ground, make sure you call your states Utility Protection Center (811) and have them come mark your utilities. It’s a free service and if you’re present while they are marking, many times they will help you out with making sure all your utilities are located well.
These are HEPA air filters pretty sure they aren't for your vtec/car...https://www.amazon.com/GrowBright-6-Inch-CleanFlow-HEPA-Filter/dp/B01M0M1YTI/ref=sr_1_1?ie=UTF8&qid=1509503519&sr=8-1&keywords=6+inch+inline+hepa+filter
Best purchase I ever made, a manual auger makes digging holes so much easier then using a traditional post hole digger
https://www.amazon.com/Seymour-21306-Hardwood-Handle-Diameter/dp/B00002N8OK
Get him a bulb auger and a big bag of daffodil bulbs (the kinds that can be naturalized). He will have so much fun and the yard will look amazing next spring.
https://www.amazon.com/Heavy-Bedding-Plant-Auger-Diam/dp/B001A5UU0O
http://www.amazon.com/Hesi-HESI-Starter-Kit-Soil/dp/B00503BU8I/ref=sr_1_1?ie=UTF8&qid=1408905867&sr=8-1&keywords=hesi+starter this one.
a combination of four diffrent ones. im not even close to the recommended mixratio. im using half of it or something.
im also using tapwater which is pretty hard where i live.
This is pretty much what I have. This one Is the style I was reccomended.
I can't believe anyone still uses that kind. This kind works so much faster and better!
Pretty cool. It utilizes a thermoelectric power generator. You can buy them on amazon.
I grabbed one a while back after someone on this reddit posted a video of a guy charging his phone by putting kindling in a coffee can, lighting them on fire, and sticking one on the side.
You can generate the electricity with cold too.
Nah, but it looks like they are just really expensive here.
http://www.amazon.com/Hesi-HESI-Starter-Kit-Soil/dp/B00503BU8I/ref=sr_1_1?ie=UTF8&qid=1348669660&sr=8-1&keywords=Hesi+nutrients
I can get the Gerneral Organics starter kit for around 40$
If you had a bit more money for the project, you could also try one of these. I watched a YouTube video on it, and it seems easy enough to do by yourself.
Ahh, to me it just looks like a electric generator motor attached to a crate engine.
You're going to need something to stand on and safely shoot from, so I'm going to modify this. IT worked for Termors, it'll work for zombies!
Looks like part of the machine a tractor pulls to cut wheat or whatever.
https://www.amazon.com/Sickle-Bar-Rock-Guard-16/dp/B07BB6XJN8
> 9800k
https://www.amazon.com/Earthquake-9800K-2-Person-Powerhead-Compliant/dp/B06X93WNRS
Spindles from a cotton picker. Used ones are also repurposed as markers by surveyors.