Reddit mentions: The best automotive replacement axle shafts
We found 5 Reddit comments discussing the best automotive replacement axle shafts. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 4 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. SurTrack CH-8221 CV Axle Shaft
- 100 percent new manufactured axle
- Each SurTrack axle comes with all necessary hardware and grease needed to complete installation
- All SurTrack axles are ABS consolidated for use in both ABS and non-ABS applications
- Each SurTrack axle is torture tested to failure to insure that the axle is designed to meet or exceed OE requirements
- Manufacture plant carries ISO 9001:2008 and TS 16949:2009 certification
Features:
Specs:
| Height | 4.33 Inches |
| Length | 42.13 Inches |
| Number of items | 1 |
| Release date | May 2013 |
| Weight | 17.4 Pounds |
| Width | 4.33 Inches |
2. 4x4 Posi-Lok PSL500 Axle Disconnect
- package dimensions :7.31 " L x 6.25 " W x 4.89 " H
- Product type :AUTO PART
- Package Weight: 2.8 lbs
- country of origin : China
Features:
Specs:
| Color | Regular |
| Height | 4.89 Inches |
| Length | 7.31 Inches |
| Weight | 4.89 Pounds |
| Width | 6.25 Inches |
3. Drive Shaft Clamping Bearing Support Mount for Porsche Cayenne & VW Touareg - THE ONLY PERMANENT FIX
- Permanently repairs the notorious bearing support - 2003-2010
- DIY installation - typically in under one hour using household tools
- No need to remove or disassemble your current Drive Shaft
- No need to re-balance your Drive Shaft
- **NOTE** If this support is too small to fit your bearing then you have an aftermarket shaft. You will need to remove the thin sheathing around your bearing prior to installing clamping support.
Features:
▼ Read Reddit mentions4. Pinhead Locking Wheel Axle Nuts
- Pack Includes 2 Security nuts and 1 Key
- Protection for: One Wheel
- Replaces your existing lock nuts
- Easy, one-time installation
- Materials: Precision forged Cro-Mo steel.Online lost key replacement available for keys registered with Pinhead.Installed weight: 26g
- Replaces standard hex nuts
- Easy one-time installation
- Installed weight: 26g
- Opens only with your unique Pinhead key
Features:
Specs:
| Color | Silver |
| Height | 1.968503935 Inches |
| Length | 3.93700787 Inches |
| Number of items | 1 |
| Release date | December 2012 |
| Size | 3/8in |
| Weight | 0.1 Pounds |
| Width | 3.93700787 Inches |
🎓 Reddit experts on automotive replacement axle shafts
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive replacement axle shafts are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Interested in what Redditors like? Check out our Shuffle feature
Shuffle: random products popular on RedditTop Reddit comments about Automotive Replacement Axle Shafts:
Summary
1. SurTrack CH-8221 CV Axle Shaft
- 100 percent new manufactured axle
- Each SurTrack axle comes with all necessary hardware and grease needed to complete installation
- All SurTrack axles are ABS consolidated for use in both ABS and non-ABS applications
- Each SurTrack axle is torture tested to failure to insure that the axle is designed to meet or exceed OE requirements
- Manufacture plant carries ISO 9001:2008 and TS 16949:2009 certification
Features:
Specs:
| Height | 4.33 Inches |
| Length | 42.13 Inches |
| Number of items | 1 |
| Release date | May 2013 |
| Weight | 17.4 Pounds |
| Width | 4.33 Inches |
2. 4x4 Posi-Lok PSL500 Axle Disconnect
- package dimensions :7.31 " L x 6.25 " W x 4.89 " H
- Product type :AUTO PART
- Package Weight: 2.8 lbs
- country of origin : China
Features:
Specs:
| Color | Regular |
| Height | 4.89 Inches |
| Length | 7.31 Inches |
| Weight | 4.89 Pounds |
| Width | 6.25 Inches |
3. Drive Shaft Clamping Bearing Support Mount for Porsche Cayenne & VW Touareg - THE ONLY PERMANENT FIX
- Permanently repairs the notorious bearing support - 2003-2010
- DIY installation - typically in under one hour using household tools
- No need to remove or disassemble your current Drive Shaft
- No need to re-balance your Drive Shaft
- **NOTE** If this support is too small to fit your bearing then you have an aftermarket shaft. You will need to remove the thin sheathing around your bearing prior to installing clamping support.
Features:
▼ Read Reddit mentions4. Pinhead Locking Wheel Axle Nuts
- Pack Includes 2 Security nuts and 1 Key
- Protection for: One Wheel
- Replaces your existing lock nuts
- Easy, one-time installation
- Materials: Precision forged Cro-Mo steel.Online lost key replacement available for keys registered with Pinhead.Installed weight: 26g
- Replaces standard hex nuts
- Easy one-time installation
- Installed weight: 26g
- Opens only with your unique Pinhead key
Features:
Specs:
| Color | Silver |
| Height | 1.968503935 Inches |
| Length | 3.93700787 Inches |
| Number of items | 1 |
| Release date | December 2012 |
| Size | 3/8in |
| Weight | 0.1 Pounds |
| Width | 3.93700787 Inches |
Is something like this worth considering?
https://www.amazon.com/SurTrack-CH-8221-CV-Axle-Shaft/dp/B001DKTG92/ref=sr_1_41?s=automotive&ie=UTF8&qid=1482899599&vehicle=1989-42-347-330--9-8-8-3363-242-8-2-1766-14-8-0&sr=1-41&ymm=1989%3Ajeep%3Acherokee
This. I recommend deleting this component and replace it with a posi-lok cable. Plug the vacuum line with a bolt. Then order and install 4x4 Posi-Lok PSL500 Axle Disconnect. https://www.amazon.com/4x4-Posi-Lok-PSL500-Axle-Disconnect/dp/B004TOLFMU Here's mine installed. It will work for all s10s. https://i.imgur.com/L0m7eQu.jpg
They just go well before they should. Sometimes 40k, sometimes 100k.
Don't get a stock replacement. Get an aftermarket fix.
https://www.amazon.com/Clamping-Bearing-Support-Porsche-Cayenne/dp/B0063GQP6S
These already exist for about the same price: http://www.amazon.com/Pinhead-Locking-Wheel-Axle-Nuts/dp/B005GEZFHI
Have you seen https://www.amazon.com/dp/B0063GQP6S/ ? It's a driveshaft bearing replacement which does not require the shaft to be rebalanced. It's the only way to really fix it without dropping $$$ for a new shaft and bearing combo. /u/Rionoko . I've had my eye on it for my Q7 if the bearing ever bites the dust.