Reddit mentions: The best automotive valve cover gaskets
We found 16 Reddit comments discussing the best automotive valve cover gaskets. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 13 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. ACDelco 25183348 GM Original Equipment Valve Cover Gasket
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Features:
Specs:
Height | 1 Inches |
Length | 4 Inches |
Weight | 0.11 Pounds |
Width | 9 Inches |
2. Fel-Pro VS50569R Valve Cover Gasket Set
Meets or exceeds all original equipment specificationsValidated for fit, form, and functionApplication specific designEngineered and manufactured specifically for the repair environmentQuality you can trust
Specs:
Height | 0.8 Inches |
Length | 15 Inches |
Number of items | 1 |
Release date | March 2008 |
Weight | 0.2 Pounds |
Width | 8 Inches |
4. Fel-Pro VS 50522 T Valve Cover Gasket Set
Problem-solving gaskets featuring advanced sealing technologies designed specifically for the repair environmentEliminates need to install new valve cover by replacing RTV silicone beadApplication-specific designUnsurpassed quality you can trustDesigned for the aftermarket repair environment
Specs:
Height | 1.1 Inches |
Length | 30.2 Inches |
Number of items | 1 |
Release date | August 2006 |
Weight | 0.6 Pounds |
Width | 8 Inches |
5. Fel-Pro VS50445R Valve Cover Gasket Set
- DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM -- Proprietary cork-rubber formulation
- SUPERIOR SEAL -- Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
Features:
Specs:
Height | 0.5 Inches |
Length | 22.9 Inches |
Number of items | 1 |
Release date | August 2006 |
Weight | 0.02 Pounds |
Width | 6 Inches |
6. Fel-Pro VS50639R1 Valve Cover Gasket Set
Meets or exceeds all original equipment specificationsValidated for fit, form, and functionApplication specific designEngineered and manufactured specifically for the repair environmentQuality you can trust
Specs:
Color | Assorted |
Height | 0.75 Inches |
Length | 12 Inches |
Number of items | 1 |
Release date | January 2009 |
Size | One Size |
Weight | 0.2 Pounds |
Width | 6 Inches |
7. Fel-Pro VS50530R Valve Cover Gasket Set
- DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM -- Proprietary cork-rubber formulation
- SUPERIOR SEAL -- Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
Features:
Specs:
Height | 0.8 Inches |
Length | 17.5 Inches |
Number of items | 1 |
Release date | August 2006 |
Weight | 0.4 Pounds |
Width | 8.4 Inches |
8. Victor Reinz 11 12 0030 496 Engine Valve Cover Gasket Set OEM 15-33077-02 plus 15 Grommet Seals
- *** IMPORTANT*** TO VERIFY FITMENT. PLEASE CONTACT US AND PROVIDE THE COMPLETE VIN NUMBER OF YOUR
- PLEASE MAKE SURE THAT YOU ARE ORDERING THE CORRECT PARTS FOR YOUR VEHICLE. IF YOU DON'T KNOW OR NOT
Features:
Specs:
Height | 1 Inches |
Length | 29.5 Inches |
Number of items | 1 |
Width | 13.5 Inches |
9. Fel-Pro VS50553R Valve Cover Gasket Set
Meets or exceeds all original equipment specificationsValidated for fit, form, and functionApplication specific designEngineered and manufactured specifically for the repair environmentQuality you can trust
Specs:
Height | 0.9 Inches |
Length | 15 Inches |
Number of items | 1 |
Release date | August 2006 |
Weight | 0.15 Pounds |
Width | 7.9 Inches |
10. Fel-Pro VS50552R Valve Cover Gasket Set
Meets or exceeds all original equipment specificationsValidated for fit, form, and functionApplication specific designEngineered and manufactured specifically for the repair environmentQuality you can trust
Specs:
Height | 1.8 Inches |
Length | 20 Inches |
Number of items | 1 |
Release date | August 2006 |
Weight | 0.84 Pounds |
Width | 10 Inches |
11. QSC Valve Cover Gasket Harness for International 04-07 DT466E / 570 1842380C95
Direct Aftermarket replacement for 1842380C95This listing is for 1x engine valve cover gasket with harnessInternational Navistar DT 466/570 (Does not fit 2007 with the DPF filter)
Specs:
Number of items | 1 |
Weight | 3 Pounds |
12. MAHLE VS50368 Gasket
- All MAHLE Original gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE Original gaskets utilizes OE equivalent or better materials in all our gaskets
- Valve cover gasket set contains all the gaskets required - may also contain spark plug tube seals and grommets if necessary.
- The contents of MAHLE Original gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Features:
Specs:
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Release date | June 2017 |
Weight | 1 Pounds |
Width | 0 Inches |
13. Fel-Pro VS 50564 R Valve Cover Gasket Set
Meets or exceeds all original equipment specificationsApplication-specific design ensures a perfect fit and premium sealValidated for fit, form, and functionEngineered for sealing repair environmentUnsurpassed quality you can trust
Specs:
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Release date | August 2006 |
Weight | 0.72 Pounds |
Width | 0 Inches |
🎓 Reddit experts on automotive valve cover gaskets
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive valve cover gaskets are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Most here think it could be your valve cover gasket. No way to know 100% unless you were to see the source. I am leaning towards the valve cover gasket because I can see the oil drip (especially around like where the dipstick is) and also because those are things that are known to break. Some people here say head gasket but i really think thats unlikely because usually that is accompanied by a loss of coolant. If you change your oil and you see coolant then that's it. That is an involved repair.
The good news is if it is your valve cover gasket this isn't super urgent so long as your oil levels dont fall too low. A lot of people are driving around with leaky valve cover gaskets as we speak! My gf drove around with a very slow VCG leak for years. If it's a head gasket or a
The other good news is on your engine it is very easy to access, and amazon has the replacement part for $5 USD https://www.amazon.com/ACDelco-25183348-Original-Equipment-Gasket/dp/B014MVJ87I (AC Delco is General Motors, so this is the actual original equipment manufacturer). Your local auto parts store would also have it in stock. To access you would just need to remove the ignition coil assembly (the black thing with two black "humps" bolted to the valve cover with 4 wires coming out labeled 1,2,3,4). And bolt off the valve cover. Probably good to disconnect the hoses. I would change the spark plugs while you're down there (the things at the end of those labeled 1,2,3,4 wires)
The medium news is that you will need to find someone with tools to do this. Tools can be expensive. You might be better off going to a mechanic unless one of your friends has tools. The mechanic will have all the tools and be sure to torque down the bolts in the right sequence and torque values. Some valve cover gaskets also require RTV silicone (less than $5, also available at auto parts store) but you have to know where to put it. My only concern is some of the bolts appear corroded and *may or may not* get stripped or break upon removal. Not saying that's a guaranteed or even a big deal but you have to have the tools and knowledge for how to deal with it. That's why im leaning towards a mechanic or a friend with a lot of tools.
The kind of concerning thing is The engine is actually built by Daewoo in south korea which is not known for reliability. Not saying there’s anything wrong with it but something to keep in mind
I'll almost guarantee its the valve cover gasket. All of my 4.0 powered jeeps have leaked from the valve cover and it looks just like it's coming from the rear main. Replace it with the good Fel-Pro gasket or some RTV and that should take care of it for the life of your engine.
Agree. Some purists will say to only get the gasket from Mazda. But considering the low price and effort of replacing the valve cover gasket, a Fel-Pro from Amazon should be just fine. You also need some silicone gasket goop for six potential leak spots. One tube should last practically forever.
It is and easy job, but you must be careful to not over tighten the bolts into your aluminum head. Torque to 43 - 78 inch-lbs. Also, tightening the bolts in the order recommended by Mazda will help avoid leaks. Use this guide: http://www.miata.net/garage/valvecover/
Amazon prime does come in handy 😁
Elring Dichtung Valve Cover Gasket https://www.amazon.com/dp/B00CIYYN9U/ref=cm_sw_r_cp_apa_i_OLePCb3F9GQ1S
I just replaced my valve cover gasket on my Honda Accord 1998, 2.3L.
But go to Amazon and get a valve cover set. I think this one fits yours, but not sure.
You might need some permatex gasket maker, too.
Valve covers are easy to get off, it's like a couple of bolts. It was hard for me to get the gasket off because it was old as hell, and I had to use a torch.
But it should be very easy.
edit: here is a video, you can see the gasket replacement around 50 seconds in.
Is that the Ford/Mazda 2.3l 4cyl? The valve cover job is about an hour, maybe 2. Very easy and quite a few videos on YouTube for it. Ford used it in so many vehicles, it is a very common engine.
Felpro VS50639R1 Valve Cover Gasket Set https://www.amazon.com/dp/B000Q0U7RA/ref=cm_sw_r_cp_apa_i_09hTCbJEPPFGY
YouTube vid from a certified Ford technician.
https://youtu.be/Y-aScxyk7pM
You can always buy the parts yourself and bring them in for install. There is atleast a 100% markup on most of your parts.
Take for instance your valve cover gasket.
http://www.amazon.com/Fel-Pro-VS50530R-Valve-Cover-Set/dp/B000C2GI4S
15$ compared to their 43$.
They even list the part numbers for you :^)
I'd also highly recommend replacing the valve cover gasket. They get brittle and leak onto your headers. Very easy job. Just be careful the you don't over tighten any of the bolts and be careful with the cover too (it's made of plastic).
Valve cover gasket: https://www.amazon.com/Engine-Gasket-Grommet-Victor-Reinz/dp/B00BZ9YV8W/ref=sr_1_2?s=automotive&ie=UTF8&qid=1522256158&sr=1-2&keywords=e46+valve+cover+gasket
The belt tensioner is known to go bad on E46's as well and that'll put you on the side of the road if it fails. Also a pretty easy replacement.
Belt tensioner: https://www.amazon.com/URO-Parts-11-427-252/dp/B0066QTNCS/ref=sr_1_2?s=automotive&ie=UTF8&qid=1522255677&vehicle=2003-31-170-20--7-6-7-8226-171-1-1---1-0&sr=1-2&ymm=2003%3Abmw%3A325ci
I did both sets. My VCG was literally hard plastic when I got it finally separated.
MAHLE Original VS50368 Engine... https://www.amazon.com/dp/B006E0P0GO?ref=ppx_pop_mob_ap_share
Dual Vanos O-Ring Seal Repair Kit... https://www.amazon.com/dp/B01JUJQOHY?ref=ppx_pop_mob_ap_share
Ok, I don't have all the information but I can tell you what happened to me with my 2000 zetec zx3.
I bought this gasket with grommets when I changed my timing belt.
When I was putting everything back together is when I finally noticed they were not even close.
The one I needed was this one, no grommets
I still don't know how you can tell the difference because when I went to autozone to get the gasket before I lost daylight, they also asked me if I wanted the gasket w/grommets or not. Every site and store says the gasket w/grommets will fit too so I don't how to make the distinction before taking the cover off.
Amazon Which isn't bad either.
Those are intake manifold gaskets.
I'm talking about valve cover gaskets.
Fel-Pro VS 50564 R Valve Cover... https://www.amazon.com/dp/B000C2GHK8?ref=ppx_pop_mob_ap_share
Fel-pro makes one-piece pan gaskets that are top notch. I just got done doing this job on my '92, along with the rear main seal, oil filter adapter housing o-rings, and valve cover gasket.
Dry as a bone now.
To OP: I would also check the oil filter adapter for leaking. Very common. And if you do buy gaskets for the pan and valve cover, spend the extra money on the one piece Fe-Pro gaskets. They're worth every penny.
tips on pan gasket replacement: