Reddit mentions: The best faucet o-rings
We found 23 Reddit comments discussing the best faucet o-rings. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 10 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. DANCO Waterproof Silicone Faucet Grease | Silicone Sealant | Plumbers valve Grease for O-rings | 0.5 oz. | 1-Pack (88693)
- PLUMBERS FAUCET AND VALVE GREASE Ideal for lubricating faucet stems valves and cartridges when repairing a leaky faucet
- LUBRICANT GREASE Contains high raw silicone content making it better for long term lubricant hold & helps hard-turning faucets work smoothly
- NSF 61 APPROVED designed for use as a waterproof lubricant on faucets valve stems cartridges and is safe for nitrite/rubber O-rings
- SAFE No chemical contamination to drinking water Retains its consistency in temperatures from -40° to 400° F
- ODORLESS and COLORLESS Odorless scent makes this product easy to work with during application and no pigment for clean use
- RESISTANCE The grease is water resistant and oxidation resistant Silicone faucet grease helps reduce friction and provides long-lasting lubrication
- HOUSEHOLD USES Our silicone sealant can be used to lubricate lubricate door hinges threads on shower heads & bolts toilet gaskets and flashlight O-rings
Features:
Specs:
Color | Clear |
Height | 3 Inches |
Length | 4.63 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 0.06 Pounds |
Width | 2.75 Inches |
2. Danco 3/4 in. OD x 9/16 in. ID, Rubber, #11 O-Ring, 10 per Card, 96728
- O-Ring Dimensions: 3/4 in. OD x 9/16 in. ID x 3/32 in. wall thickness
- Danco O-ring #11: Compatible with Barnes, Central, Crane, Cuthbert, Dick Brothers, Dishmaster, Grand Haven, Jameco, Kohler, Milwaukee, Mueller, Mullins, Price Pfister, Schaible, Speakman, Stanadyne, Sterling, Teck, and Youngstown faucets
- These tough, pliable Buna-Nitrile Rubber (NBR) O-Rings help eliminate leaks, prevent faucet drips and provide long-term use for your plumbing needs
- O-rings have high abrasive and a high level of tempature resistance that will withstand heat between a temperature range of 86°F to 248°F (-30°C to 120°C)
- Danco o-rings are widely used by plumbeing proffesionals and DIY homeowners alike to prevent plumbing issues
- Includes 10 O-Rings per bag for faucet repair
Features:
Specs:
Color | Black |
Height | 2 Inches |
Length | 3 Inches |
Number of items | 1 |
Size | 96728 #11 Rubber Faucet O-Ring, 10-Pack |
Weight | 0.02 Pounds |
Width | 1 Inches |
3. XLX 225Pcs 12 Sizes Rubber O-Ring Gasket Silicone Sealing Repair Box Washer Seal Assortment Set for Plumbing Automotive General Repair
- Ultimate Compatibility: Compatible with most action cameras, including GoPro Hero10, 9, 8 , GoPro Max, GoPro Fusion, and its earlier models. Also suitable for DJI Osmo Action, Insta360, AKASO, APEMAN, Campark, SJCAM, etc
- Straps for Head, Chest & Helmet: Designed for all head sizes and body shapes, the straps secure the camera on your head and chest for taking breathtaking POV shots of surfing, skateboarding, parachuting, and bungy jumping. The helmet strap tightly fastens your camera on a helmet for road biking races, mountain bike trails, and BMX
- Wrist Strap & Floating Handle Grip: The wrist strap with a 360° rotatable mount is easily adaptable to fit your wrist and arm for taking shots from different angles. The floating handle grip keeps your camera afloat in the water when swimming or snorkeling
- Handlebar Mount & Suction Cup: Handlebar mount fits bars of 0.75”–1.4” (1.9–3.6cm) in diameter on your bike and motorbike and allows 180° tilt movement. Suction cup attaches your camera to the car for in-car footage
Features:
4. ABN Assorted O Ring Kit - Metric Rubber O Rings Assortment Set, 419 Piece Assorted O Ring Rubber Washer Set
LARGE RUBBER O RING SET: Use the ABN 419 Piece Metric O Ring Assortment Kit for all your plumbing, automotive, and general household repairs; Each rubber Orings kit includes 32 Metric sized small rubber O rings for versatilityPREVENT LEAKS: Create a secure seal in your bathroom and kitchen faucets, ...
Specs:
Height | 1.8 Inches |
Length | 9.8 Inches |
Number of items | 1 |
Size | Metric |
Weight | 1.2 Pounds |
Width | 6 Inches |
5. O'Ring 5/16 Inch x 1/2 Inch x 3/32 Inch by Danco No 35711W
Resistant to water swell, steam and abrasionMade from compound Nitrile Butadiene Rubber5/16"IDx1/2"ODx3/32" wall thickness; #83For faucet repairPolybagged
Specs:
Height | 4.9 Inches |
Length | 0.2 Inches |
Number of items | 1 |
Weight | 0.01 Pounds |
Width | 3 Inches |
6. American Standard M906667-0070A Mounting Ring for Pekoe Kitchen Faucets, N/A
- Unique cotton mesh fabric mens bikini underwear. Unique fabric, contour pouch front bikini style with thin waist keeps it comfortable and cool with looking very stylish. LOBBO brand underwear for men.
- Sexy low-rise style. Men's mesh underwear brief made with a breathable mesh fabric 100% cotton.
- Breathable and moisture-wicking. Gift for men, boyfriend or your husband.
- Bulge-enhancing pouch provides comfort, support, and sex appeal. Chose from black, white, blue
- Small 28"-30", Medium 31"-34", Large 35"-38", XL 39"-42", XXL 43"-46"(add $1USD for XXL size).
Features:
Specs:
Number of items | 1 |
Weight | 5 Pounds |
7. Danco 80973 Spout Repair Kit for Delta Single-Handle Faucet
- DL-15 Spout O-Rings
- Used on most popular kitchen faucets
- Includes 4 o-rings
- DL-15 Spout O-Rings
- Includes 4 o-rings
Features:
Specs:
Height | 2.5 Inches |
Length | 2.5 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.03 Pounds |
Width | 0.75 Inches |
8. Danco 80788 O-Ring Assortment, 14-Piece, Black
- Contains the most popular 8 sizes
- Withstands harsh chemicals
- 14 total pieces
Features:
Specs:
Color | Black |
Height | 3 Inches |
Length | 4.63 Inches |
Number of items | 14 |
Size | Pack of 1 |
Weight | 0.04 Pounds |
Width | 2.75 Inches |
9. Danco 7/8 in. OD x 11/16 in. ID, Rubber, #13 O-Ring, 10 per Card, 96730
- O-Ring Dimensions: 7/8 in. OD x 11/16 in. ID x 3/32 in. wall thickness
- Danco O-Ring #13 (AS568B# 115): Compatible with American Standard, American Kitchen, Briggs Republic, Central, Gopher, Jameco, Kohler, Mueller, and Universal Rundle faucets
- These tough, pliable Buna-Nitrile Rubber (NBR) O-Rings help eliminate leaks, prevent faucet drips and provide long-term use for your plumbing needs
- O-rings have high abrasive and a high level of tempature resistance that will withstand heat between a temperature range of 86°F to 248°F (-30°C to 120°C)
- Danco o-rings are widely used by plumbeing proffesionals and DIY homeowners alike to prevent plumbing issues
- Includes 10 O-Rings per bag for faucet repair
Features:
Specs:
Color | Black |
Height | 4 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | 96730 #13 Rubber Faucet O-Ring, 10-Pack |
Weight | 0.02 pounds |
Width | 1.64 Inches |
10. Cal Hawk CZORS 225 O-Ring Assortment Kit SAE Pneumatic Air Rubber Hydraulic Tool Set
- 18 different sizes, 225 pieces
- Use for personal and professional workshops, garages, and plumbing services
- Storage case organizer included
- Rubber construction
Features:
Specs:
Height | 6 Inches |
Length | 6 Inches |
Width | 4 Inches |
🎓 Reddit experts on faucet o-rings
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where faucet o-rings are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Aight, fair warning though, some of this stuff is currently out of stock and I don't know when they'll be restocked and it's been a while since I ordered some of these parts, but I'm pretty sure they're all sitting in my gun at the moment.
​
Also, if you need help installing anything or have any questions, feel free to hit me up.
​
Let's preface this with some general stuff that you should have on you:
A set of O-rings won't hurt to have, even if you only need the smallest ones
Superglue also doesn't hurt to have, I had to use some
​
Starting from the Magazine:
Extended mags are always nice to have
Nine Ball high flow valves
\^ For these, you're gonna want to replace the O-ring on the moving piston of these with smaller ones from that box, then glue it in place. I had an issue where the standard sized one would shift on me when I fired, which really hampered the amount of gas released then kept the valve from closing all the way, leading to the magazine leaking out after one anemic shot. Replacing the O-ring and gluing it in place fixes that
​
Going to the actual gun:
Poseidon ICE Breaker Piston Head
\^ Installation's a bit funky, you're gonna want to take the screw from your factory piston head and use that with this piston head without the factory cup looking thing that comes with it
DP Enhanced Rocket Valve
\^ This one's pretty simple, just a drop-in piece
Action 150% Enhanced Hammer Spring
\^ I Think this is what I ordered, it looks pretty similar and if memory serves you should install it with the tapered end down
A+ 6.01 Precision Inner Barrel & Rubber Set
\^ Really just a simple drop-in, don't lose your gun's hop-up bead!
RA-Tech Steel threaded outer barrel
\^ This one is kind of weird, and will need three O-rings to get working to its greatest potential. When I first dropped this part in, my gun was literally chewing up BBs and spitting plastic chunks out. To remedy this, use two more O-rings from that box and put them around the inner barrel, this fixed the problem for me. The last O-ring is a real steel part and goes into the groove on the outside of the barrel and is there mainly to improve accuracy. Plus, the barrel doesn't come with a thread protector so you'll want to pick one up separately, the barrel uses 16mm CW threading
​
Bonuses; stuff that you could pick up and use, but I haven't for whatever reason:
Sights: I use the standard sights because pretty early on I poked out the little white plastic dots and replaced them with glow paint, as well as custom mounting a fiber optic holder for the front sight (PM me and I'll send you the STL) but you could give the tactical sights a try
USP Tactical Front Sight
USP Tactical Adjustable Rear Sights
USP Comp-Tac Front Sight
USP Comp-Tac Rear Sights
\^ The compact tactical sights look like they'll fit on the standard slide, but I don't know. Front sights are held in by friction and should be glued down, Read sights are held in by a hex screw that goes in through the BBU
​
Recoil Springs; I bought these, then realized that since I live in Massachusetts, it's too cold most of the year to actually use them to their greatest potential
Enhanced Recoil Springs
\^ Only the big one on the outside actually does anything, so you only need to worry about installing that one
Wish I could take mine out and measure it for you, but knowing my luck (and without having a spare myself), I'm almost certain I'd either break it or lose it. Maybe just email Jason at Prometheus (support@darksucks.com) and ask him what size he'd recommend for an aftermarket o-ring? Personally, I'd probably just buy a multi-size o-ring kit at Amazon (LINK) and hope for the best, lol (no idea if the OEM gasket is nitrile or silicon, or if it's SAE or metric.. probably under 0.8", though). Good luck!
Just today I am carrying my Vista modded to an eyedropper. You would love it!
Then you'll have that gorgeous slosh like this dude
Have you used an o-ring while dry firing? I have a CZ 75B omega and I do a lot of dry firing as well, since I just moved back to MD permanently and I don't have a range yet.
I have the #83 size and it works great for me. I found out about the idea from reading the CZ forums where people swear by them. They say it protects the firing pin (I think), but it definitely is supposed to add a layer of protection to the gun while dry firing.
EDIT: I just realized that /u/reshp2 gave a really good explanation on the o-rings.
I got mine from an Amazon seller. There were a bunch in the pack which is nice bc it doesn't matter if one falls loose; you have plenty of replacements. Link: https://www.amazon.com/dp/B008RG83GM/ref=cfb_at_prodpg
The glass ones do get kinda loose. I bought the wooden stems. You can also get an o-ring that will hold the loose ones tighter. This is how I fixed my Arizer Solo stems from being too loose for $10
First off, here are the O-Rings that I bought. $10 including shipping.
$3 from Home Depot http://www.homedepot.com/p/DANCO-10-O-Rings-10-Pack-96727/100232944#.UhusnBs3vuR
UPDATE: /u/Ericdoesntknow & /u/CrispyChipz have informed me that these O-Rings are for sale at Home Depot, and on top of that they're cheaper! If anyone has a link to them please send me the link, if I can remember to run to Home Depot I'll grab the UPC # and post that with a link .
Here are the pictures
Let me know if you have any questions.
http://www.reddit.com/r/vaporents/comments/1eyvo0/this_is_how_i_fixed_my_arizer_solo_stems_from/
Fully extend the legs in the up position.
Apply some lubricating grease - lightly.
Use something similar to this: https://www.amazon.com/dp/B000DZFUPC
Lower and raise a few times. See if that helps.
If it doesn't work, Ryan is always stalking the forum and can sell you a new frame.
P.S. Also, don't just google "lubricant". At least not from work.
Those are jamb screws. They actually don't tighten into anything. No wonder it broke off.
Look at this picture:
https://www.amazon.com/American-Standard-M906667-0070A-Mounting-Kitchen/dp/B004FVA3ZM
A little different than yours, but you get the idea. Unscrew the intact one until it turns easily, and see if you can get some needle nose vise grips on the broken one:
https://www.amazon.com/Needle-Locking-Grips-Clamp-Pliers/dp/B06Y3NRNQY
If you are lucky, you can that one to loosen as well. Then you tighten the big nut that is hidden under all that silicon sealant. You use a basin wrench for that:
https://www.homedepot.com/p/3-8-in-x-1-1-4-in-Telescopic-Basin-Wrench-70225/203550188?MERCH=REC-_-PIPHorizontal2_rr-_-204277452-_-203550188-_-N
NOTE: for illustration only. They have much cheaper ones....
Then tighten the jamb bolts. Just enough so the big nut cannot back off. 5 foot pounds, maybe.
Here are the materials I used if anyone is interested.
Pen: http://www.amazon.com/Nemosine-Singularity-Fountain-Demonstrator-NEM-SIN-01-EF/dp/B008LXW6XW/ref=sr_1_1?ie=UTF8&qid=1462826541&sr=8-1&keywords=nemosine
O-Rings: http://www.amazon.com/010-Buna-N-Ring-Durometer-Black/dp/B000FN0V6A?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s01
Silicone Grease: http://www.amazon.com/Danco-88693-Silicone-Grease/dp/B000DZFUPC?ie=UTF8&psc=1&redirect=true&ref_=od_aui_detailpages01
These are the exact o-rings that you want. 2 packs.
When installed you will not be able to tell the difference from original.
Danco 80973 Spout Repair Kit for Delta Single-Handle Faucet https://www.amazon.com/dp/B000DZFZ02/ref=cm_sw_r_cp_api_i_R.1KDbGH1VHJS
Sure thing!
Magnet:
https://www.amazon.com/dp/B00I46V06A/ref=cm_sw_r_cp_awdb_t1_DL-OCbDDQ353J
Weight:
https://www.amazon.com/dp/B0074VCP8S/ref=cm_sw_r_cp_awdb_t1_NO-OCbSHCR82S
O-Rings:
https://www.amazon.com/dp/B000DZDQU8/ref=cm_sw_r_cp_awdb_t1_1P-OCb0J9BCCQ
Looks like it's sold out in a lot of places.
Would this Danco 88693 Silicone Grease work?
I agree, I've used this thicker silicone grease for all my eyedropper conversions.
[Here] (http://www.amazon.com/gp/product/B001HOEU5Y/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1)
It looks like its not available anymore, but you just need to search yourself and find this exact same O-ring.
I've been using this stuff, from Amazon:
https://smile.amazon.com/gp/product/B000DZFUPC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
(Danco 88693 Silicone Grease, $3.37)
Heres some from planet vape.
Here is some from Amazon if you would rather go that way.
or here is some from home depot (which is carried at most stores)
Try Amazon. I believe they are a #13 o-ring.
https://www.amazon.com/dp/B000L8BB6I/ref=asc_df_B000L8BB6I5114510/?tag=hyprod-20&creative=394997&creativeASIN=B000L8BB6I&linkCode=df0&hvadid=167155689281&hvpos=1o2&hvnetw=g&hvrand=11251054655745804806&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9012139&hvtargid=pla-359854581567
Cal Hawk CZORS 225 O-Ring Assortment Kit SAE Pneumatic Air Rubber Hydraulic Tool Paintball Set https://www.amazon.com/dp/B0050JOJMQ/ref=cm_sw_r_other_awd_sGx5wbQAS1MR9
This is what I bought.
Silicone lubricant is the way to go! I purchased this one.
https://www.amazon.com/dp/B000DZFUPC/ref=asc_df_B000DZFUPC5417172/?tag=hyprod-20&creative=394997&creativeASIN=B000DZFUPC&linkCode=df0&hvadid=167133658256&hvpos=1o5&hvnetw=g&hvrand=16677472986038636588&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009715&hvtargid=pla-312855021118
That's a old Delta faucet -- the spout seals with 2 large o-rings. It shouldn't screech when you move it.
If you were to get a rebuild kit it would probably fix the problem. Wouldn't hurt to lube the o-rings with some food-grade lubricant.