Reddit mentions of Griot's Garage 11146 Speed Shine (Quick Detailer) 35oz

Canuba wax when I feel ambitious. I really like the Griots speed shine in between waxes

I use a clay bar kit I got from the store, I figured it's just clay - nothing fancy. You can use water or a quick detailer as a lubricant, I personally use Griot's Garage Speed Shine.

For waxing, I do a layer of Jescar Power Lock Plus sealant, wait a day, then add a layer of Collinite 845 which should give it lasting protection.

Visit /r/autodetailing, they have fantastic tutorials and tips for beginners to those looking to go more advanced.

Pressure wash with This pressure washer
Foam cannon from Amazon [Foam cannon](http://www.MATCC.com/ Adjustable Foam Wash Gun 1L Bottle Car Wash Gun Snow Foam Lance With 1/4" Quick Connector https://www.amazon.com/dp/B01CE78VO8/ref=cm_sw_r_cp_apa_VrJmzb8PWHAQH)
Then I used regular 2 bucket car wash with grit guard from Amazon, speed shine (2 towels), spray wax, vacuum, interior cleaner, leather conditioner, plastic conditioner, and spray window cleaner.

All the products I use are griots garage... Really good quality stuff.

[Speed shine](http://www.Griot.com/'s Garage 11146SP Speed Shine - 35 oz. https://www.amazon.com/dp/B00J5CVMLU/ref=cm_sw_r_cp_apa_KuJmzbF11YMYS)
[Interior cleaning ](http://www.Griot.com/'s Garage 10956 Interior Cleaner - 22 oz. https://www.amazon.com/dp/B00F4PB8IY/ref=cm_sw_r_cp_apa_lvJmzbYGA8QRT)
[Spray wax](http://www.Griot.com/'s Garage 10962 Spray-On Wax - 22 oz. https://www.amazon.com/dp/B00F4PB8H0/ref=cm_sw_r_cp_apa_WvJmzb2DC8ZAZ)
[Wash soap](http://www.Griot.com/'s Garage 10866 Brilliant Finish Car Wash - 64 oz. https://www.amazon.com/dp/B00PA2LMVY/ref=cm_sw_r_cp_apa_IwJmzbPEEQTMQ)

Just keep going down the griot's line up... High quality all around. Cheers

First of all, here's a link with some pictures: https://imgur.com/a/DdDMX8f

I just bought this car two weekends ago and I'm stoked. I have washed it once (normal two-bucket method, no polish/wax). I'm going to plan for a more in-depth detail this coming or the following weekend, so I'm planning on making some purchases and wanted to run them by you guys! My general plan is do a foam cannon spray, rest a little bit, rinse, decontaminate w/ Griot's Speed Shine and Griot's Synthetic Clay.

After decontamination, in the long run, I would like to put a coat of CQuartz. Beforehand, obviously, I need to remove as many of the swirls/scratches as possible. I don't have any experience yet with compounding/polishing so do you think I should try it first before buying the CQuartz, or should I just go for it?

Here's what I'd like to buy:

1. Soap - Currently I have a bottle of some basic Meguiars cheap stuff that I was using on my previous old cars. After reading around some, I was going to either go with Gold Class or Optimum Car Wash. CarPro Reset is another option for me as I would like to apply CQuartz eventually so I want something without additives and waxes. Currently I have Optimum Car Wash in my cart, any reason I should go with anything else? I know everyone raves about ONR, but is that more for maintenance washes? Haven't looked into it much yet.
   
2. Snow foam - Chemical Guys Honeydew Snow Foam. I have a small bottle of this and I like the results, so I may buy a gallon unless I'm convinced otherwise!
   
3. Drying Towel - I have plenty of normal microfiber towels for touching up and interior work, but I don't have dedicated large drying towels. The Meguiar's X2000 drying towel was recommended a couple places on the sub and it seems like a good value; but I have heard Griot's is good as well. Any thoughts?
   
4. Polisher - Griot's Garage 6" DA Polisher. From what I have read, this seems to be one of the best-rated entry-level polishers. I haven't done enough research yet to know what type of pads/liquids I will need based on my specific paint, so I'll save those decisions for another day. The car was mostly well taken care of but there are a couple etched spots from what I'm assuming was bird poop or sap. There are a couple pictures in the album of this. Other than that, there seem to be an average amount of "swirl" marks but I'll need to do more research to determine what level of liquid/pads I need. I took the photos in the morning so I didn't have a good light source to show the "swirls".
   
   I already have some good stuff for cleaning wheels and I've been using Griot's Interior Detailer for the interior and it seems to be doing a good enough job. The interior isn't very dirty so just light cleaning suffices.
   
   As for CQuartz prep, before I am more confident in the paint correction process, should I apply a wax after polishing, or will that just make it more of a pain in the ass to decontaminate the paint when I decide to apply CQuartz in the next month or so? FYI, I'm going to be reading the DA polishing guides on this sub before I buy anything related to that.
   
   Any comments or suggestions on things I have selected?
   
   Thanks!

Hey guys,

If you look at the exhaust straight on, there's so much carbon build up. I live in the Bay Area where it's been sunny so the outside of it looks shiny! Once rain starts, it'll be messy like the rest. It's an aftermarket exhaust as well.

I always keep this and a microfiber in my car so I can wipe away gunk that gets on my car.

https://www.amazon.com/Griots-Garage-11146SP-Speed-Detailer/dp/B00J5CVMLU/ref=sr_1_1?ie=UTF8&qid=1505861830&sr=8-1&keywords=griots+garage