Reddit mentions: The best power metal-cutting & chop saws
We found 25 Reddit comments discussing the best power metal-cutting & chop saws. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 15 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Makita LC1230 12" Metal Cutting Saw
- Carbide-tipped blade lasts 50x longer than abrasive wheels; cuts clean, accurate and virtually burr-free
- Quick release vise for secure material retention and fast, repeated cut-offs
- Lock-off button for user convenience
- Quick release support fence adjusts 0-45° for miter cutting
- Shaft lock for easy blade changes with just one wrench
Features:
Specs:
Color | Blue |
Height | 17.32 Inches |
Length | 13.78 Inches |
Number of items | 1 |
Size | One Size |
Weight | 42.5 Pounds |
Width | 22.56 Inches |
2. PORTER-CABLE PC14CTSD 14-Inch Chop Saw
- 15amp motor with replaceable brushes provides adequate power and durability
- Front D handle design reduces force needed to pull handle when cutting
- Quick release material clamp allows for fast and easy material cutting and removal
- Ball bearing design increases durability of motor
- 45-degree miter capacity allows up to 45-degree angles to be cut
Features:
Specs:
Color | Black |
Height | 17.2 Inches |
Length | 22.8 Inches |
Number of items | 1 |
Size | 1 in. |
Weight | 0.01 Pounds |
Width | 14.2 Inches |
3. DEWALT Metal Cutting Saw, 14-Inch (DW872)
- Multi-Cutter Chop Saw offers versatility by cutting a wide variety of materials including ferrous and non-ferrous metals
- Utilizing a carbide-tipped blade of the metal chop saw allows the depth-of-cut to remain constant throughout blade life
- The metal cutting saw cuts 4-times faster than chop saws and 8-times faster than portable band saws in 2-inch x 2-inch x 1/4-inch angle iron
- 14-inch, 66-tooth, carbide-tipped blade delivers a lower cost-per-cut compared to cutting with abrasive wheels
- Specially designed carbide teeth deliver fast, precise, and virtually burr-free cuts reducing the need for preparation grinding and finished cuts that are cool to the touch
- Largest capacity in its class with even more capacity than a deep-cut portable band saw (5-3/16-inch round & 4-1/2-inch x 6-1/2-inch rectangular) allowing user to cut a wider variety of different size materials for more applications
- Ergonomically designed horizontal handle puts user's wrist in a more comfortable position to help reduce user fatigue and increase productivity
- 15 amp / 4 HP motor provides more overload capacity to increase performance and durability
- Patented, 45-degree, adjustable Quick-Fence allows for fast and accurate angle cuts without using a wrench
- Quick-lock vise allows for fast clamping on different size materials to increase productivity
Features:
Specs:
Color | yellow and black |
Height | 18.5 Inches |
Length | 24 Inches |
Number of items | 1 |
Size | 1" |
Weight | 55 Pounds |
Width | 15.25 Inches |
4. Scheppach M90700 6 1/4-inch Blade Plunge Saw with Two 25" Rails and Connector
9-Amp universal motor with replaceable carbon brushes110VAC, 60 Hz, 5500 RPMBlade: 6 1/4-Inch diameter with 20mm arbor holeCut depth capacity 2 1/8 -Inch small/w/guide rail at 90-Degree, 1 5/8- Inch small/w/guide rail at 45-DegreeCut flooring as close as 0.61-Inch to the wall
Specs:
Height | 9 Inches |
Length | 13 Inches |
Number of items | 1 |
Width | 10 Inches |
5. Neiko RIDGE30065A 1/4" Npt Air Inlet Pneumatic Air Saber Body Saw, 6 CFM/90 psi/10000 RPM
Designed for high-speed metal cutting requirements with body and sheet metal and ideal for body shop repair, muffler and exhaust workBody constructed with aircraft grade aluminum with adjustable blade guide that increases blade life and rubber soft-grip provides a firm holdCuts intricate shapes and ...
Specs:
Height | 1.77 Inches |
Length | 11.1 Inches |
Number of items | 1 |
Size | 6 CFM/90 psi/10000 RPM |
Weight | 1.5 Pounds |
Width | 3.11 Inches |
6. DEWALT Chop Saw, 14-Inch (D28710)
- 15 amp/4HP (maximum motor HP) motor provides overload protection, increasing performance, and durability, QUICK-LOCK Vise allows for fast clamping on different size materials to increase productivity
- Spindle Lock allows user to make wheel changes quickly and easily, On-board wheel change wrench allows for convenient storage
- Ergonomically designed "D" handle provides a more comfortable hand position, reducing fatigue, 45-degree pivoting fence allows for fast and accurate angle cuts, Integrated top handle allows the saw to be carried around easily
- High performance aluminum oxide grain wheels provides for long life, fast cutting, and smoother running wheels
- 15 Amps, Tool Length: 18-3/16 in, Wheel Arbor: 1 in, Max Capacity (Rectangular): 4" x 7-5/8 in
Features:
Specs:
Color | Yellow |
Height | 17 Inches |
Length | 21.9 Inches |
Number of items | 1 |
Weight | 1 Pounds |
Width | 14.6 Inches |
7. Makita 2414NB 14-Inch Portable Cut-Off Saw (Discontinued by Manufacturer)
- D-shape handle for easy gripping
- Lock-off button for user convenience
- Fence adjusts 45° right and left; 3 locations for various material sizes
- Quick release vise for secure material retention and faster, repeated cut-offs
- Spark diversion guard
Features:
Specs:
Color | Blue |
Height | 23.622 Inches |
Length | 19.685 Inches |
Number of items | 1 |
Weight | 40.565056208 Pounds |
Width | 11.0236 Inches |
8. Evolution Power Tools RAGE4 7-1/4-Inch TCT Multipurpose Cutting Chop Saw
- No coolant required and produced virtually no sparks
- Easier to use than a hacksaw
- Compact and portable
- High quality construction
- No heat build up when cutting steel
Features:
Specs:
Color | Orange |
Height | 10.5 Inches |
Length | 10 Inches |
Number of items | 1 |
Size | 7-1/4" Chop Saw |
Weight | 19 Pounds |
Width | 15 Inches |
9. Evolution Power Tools RAGE3 10-Inch Multipurpose Cutting Compound Sliding Miter Saw
MULTIPURPOSE CUTTING: Patented multipurpose cutting technology allows you to make compound miter cuts in mild steel, aluminum, plastics, and wood; with the included blade.MINIMAL SPARKS, BURRS & HEAT: Cut through 6mm mild steel with no heat, no burrs & virtually no sparks, leaving an instantly worka...
Specs:
Color | Orange |
Height | 25 Inches |
Length | 30 Inches |
Number of items | 1 |
Size | 10" Miter Saw |
Weight | 39 Pounds |
Width | 20 Inches |
10. PORTER-CABLE Chop Saw, 15-Amp, 14-Inch (PCE700)
15 Amp, 3,800 RPM motor with replaceable brushesQuick-release material clampCutting fence with miter adjustmentHeavy duty steel base for stabilitySpark deflector
Specs:
Height | 17.06 Inches |
Length | 22.69 Inches |
Number of items | 1 |
Size | 14" |
Weight | 32 Pounds |
Width | 14 Inches |
11. Makita XSC01Z 18V LXT Lithium-Ion Cordless 5-3/8" Metal Cutting Saw, Tool Only
- Makita-built motor delivers 3, 600 RPM for faster cutting in a wide range of metals
- Compact, ergonomic design at 13-3/4" Long and weighs only 5.7 lbs. For reduced operator fatigue
- Built-in L.E.D. Light illuminates the work area
- Soft grip handle provides increased comfort on the job
- Lxt Lithium-Ion battery and Rapid optimum charger produces 430% Total lifetime work with 3x more cycles
Features:
Specs:
Color | Factory |
Height | 9.69 Inches |
Length | 9.37 Inches |
Number of items | 1 |
Size | One Size |
Weight | 8 Pounds |
Width | 13.9 Inches |
12. Evolution Power Tools RAGE2 Multi Purpose Cutting Chop Saw, 14-Inch
- Multipurpose, cuts steel, aluminum, wood and plastics using a single blade
- 1800-watt/15-Amp motor
- 1450 RPM no load
Features:
Specs:
Color | Orange |
Height | 24 Inches |
Length | 23 Inches |
Number of items | 1 |
Size | 14" Chop Saw |
Weight | 46 Pounds |
Width | 12 Inches |
13. Milwaukee 6190-20 15 Amp 14-Inch Metal Cutoff Machine
Powerful, 4.8-horsepower/15 amp motor for quick cutting applicationsTool-free fence and vise system for less downtimeHeavy-duty cast base for optimal stabilityLargest cutting capacity-inch class for larger stockFast cuts thanks to its 1,500 rpms
Specs:
Height | 25.2 Inches |
Length | 16.5 Inches |
Number of items | 1 |
Weight | 0 Pounds |
Width | 18.9 Inches |
14. Milwaukee Electric Tool 6370-21 Electric Corded Circular Saw Kit, 120 V
Includes 8” saw, hex blade wrench, circular saw blade, and carrying caseOverall length: 6-1/2”Overall weight: 13.3 lbsDesigned for faster, cleaner metal cuttingDry-cut technology provides faster, cleaner, more affordable metal cuttingDurable blade shield with integral chiptank deflects/collects ...
Specs:
Color | Red |
Height | 24.4 Inches |
Length | 14 Inches |
Number of items | 1 |
Size | 8" |
Weight | 14 Pounds |
Width | 16.4 Inches |
15. DEWALT Chop Saw, Quick-Change, 14-Inch, Old Model (D28715)
The item is DEWALT D28715 14-inch quick-change Chop sawUsed for hand tools & tool Organizers, handsawsThe product is manufactured in ChinaPowerful 15.0 Amp/5.5 hp (maximum motor hp) motor provides more overload capacityQuick-Change blade change system lets users change wheels without a wrenchPatente...
Specs:
Color | Yellow |
Height | 16.5 Inches |
Length | 24 Inches |
Number of items | 1 |
Size | Height 15.75 in Width 13 in |
Weight | 39 Pounds |
Width | 15 Inches |
🎓 Reddit experts on power metal-cutting & chop saws
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where power metal-cutting & chop saws are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I've seen people have good luck getting a metal cutting blade for a chop saw, but they're rather expensive and you risk burning out your saw.
I think you're best bet is to buy a cutoff saw on craigslist. Shoot for $75-$90. You'll probably use two disks at $5 a pop. The 45's are tough to cut on those, but you dont have to if you dont want to.
I picked one up locally for $100 and I'm happy with it.
You can also rent them for the day, but good luck getting all your cuts and never needing it again.
The best method if you have the cash is a horizontal band saw. You can get an alright one from HF for $170, but it takes up some floor space.
You'll for sure need an angle grinder and a boat load of disks.
You're sawzall likely won't help you any.
Here's where I'm at on mine. http://imgur.com/XpSs4
Prior to this I've never had any experience with metal working, welding, sweating (made a CFC), etc.
A lot of learning came from the prestigious University of Youtube.
i bought this on woot, and looks like amazon has a great deal going on right now. used it for my last project and it was awesome.
http://www.amazon.com/Scheppach-M90700-4-inch-Plunge-Connector/dp/B009AQ81FQ
haha, ok apparently I misheard the person who helped, or just made up a name, it's king of like this but a sturdier handle and a nice blade, I think I saw something akin to it at Home Depot the other day too, this is an idea, it was different though(brand, shape of handle and all), but hefty and nice:
https://www.amazon.com/Neiko-RIDGE30065A-Inlet-Pneumatic-Saber/dp/B000IU0CSW/ref=zg_bs_1026922_6?_encoding=UTF8&psc=1&refRID=71FHJDN1XYT0S0SWTVWG
and bingo: we need to get the new one in still, but working on that!
Makita LC1230 12" Cold cutting metal saw. Not a true cold saw, but pretty damned close. I've bought the lower end portable band saws and they're fine for rough cuts on light sock - but if you need to cut up a batch of angle iron or steel for welding projects - and you want consistent cuts that don't take all day - you'll LOVE one of these saws. I've had mine for a year and the original blade is still going strong.
http://www.amazon.com/Makita-LC1230-12-Inch-Metal-Cutting/dp/B00004YOLV
You need a metal cutting circular saw. They are low RPM and high torque. The Harbor Freight 5 3/8" one does not work as you cannot find a blade that is fine enough for Aluminum anywhere. You need a 7 1/4" 60 tooth blade at least.
This saw on e-bay should work. Use google to find your blade.
http://www.ebay.com/itm/metal-cutting-circular-saw-/151348856713?pt=LH_DefaultDomain_0&hash=item233d184789
Frankly, if you have the money, this 14 inch Multi Cutter with a 100 tooth blade will do the job nicely.
http://www.amazon.com/DEWALT-DW872-14-Inch-Multi-Cutter-Saw/dp/B0000302QS/ref=lp_1026922_1_5?s=power-hand-tools&ie=UTF8&qid=1405138745&sr=1-5
Finish is outstanding with either tool, when you use the right blade.
This thing is tremendous. It looks like a chop saw, but it uses a carbide-tipped sawblade instead of an abrasive disc. Cuts steel in seconds, leaves a clean edge, doesn't heat up the stock like an abrasive saw.
A chop saw works great. They’re insanely fast.
PORTER-CABLE PCE700 15 Amp Chop Saw, 14" https://www.amazon.com/dp/B00NI2CF28/ref=cm_sw_r_cp_api_i_9OvnDb6KH8BZ4
Sounds like a job for an abrasive chop saw, like this one:
https://www.amazon.com/DEWALT-D28710-14-Inch-Abrasive-Chop/dp/B00551DJBQ
Because the safety guards are shaped differently for cutting and grinding, a cutoff wheel in a bench grinder is potentially deadly. Even if that is really what he wants, please do not get them for him. You might consider getting him a cutoff saw. Here are a couple models that are decent:
https://smile.amazon.com/PORTER-CABLE-PCE700-Amp-Chop-Saw/dp/B00NI2CF28
https://smile.amazon.com/Makita-2414NB-14-Inch-Portable-Cut-Off/dp/B0000223J5
The answers seem to depend on what you're using the rods for, and what the quality of cut needs to be. With the bolt-cutters, you were ending up with a pinched cut. If that was acceptable, any other method would probably work fine too.
Is there any other metal work that is done, that would benefit from also using any tool purchased for this task? Or would something dedicated to this job be an acceptable cost?
A harbor freight portable bandsaw is rather cheap, would give a reasonable cut at a reasonable speed.
You could also pick up a cheap 7.5" or 8 1/4" miter saw ($60-130), and get a metal cutting blade for it ($50-100). I tried a wood blade with perpendicular teeth, and was able to cut 1/4" steel fine too; it'd certainly work on copper. I'll tell you before others correct me, those aren't intended for that sort of work, so for business purposes they'd be entirely the wrong thing to use. That said, I expect it'd work.Or for a tool intended for that purpose, $150 gets you a 7-1/4" metal cutting chop saw with tungsten carbite teeth, so no gumming up an abrasive blade with the soft copper. Under $20 replacement blades too. Much cheaper than even my miter saw idea above, so we'll ignore that.
I've got one. It's badass, say good bye to all the abrasive shit and sparks flying everywhere.
Mine is an Evolution saw + blade.
I think this is the one I have:
https://www.amazon.com/Evolution-Power-Tools-RAGE3-Multipurpose/dp/B0030M2TCC
I bought the steel purpose blade and it came with the multi-purpose. The steel one is blue color, so it could very well be the one being used in the video.
I've been considering the Evolution Rage 3 for awhile now, it gets pretty great reviews and can cut wood, aluminum and even steel.
https://www.amazon.com/Makita-LC1230-12-Inch-Metal-Cutting/dp/B00004YOLV
Buy this and you can thank me later.
grab one of these http://www.amazon.com/Evolution-Power-Tools-RAGE3-Multipurpose/dp/B0030M2TCC/ref=sr_1_1?ie=UTF8&qid=1419187986&sr=8-1&keywords=rage+3
150, and burr free cuts. You can even use it for wood later.
I'd disagree. I think you'd be much happier spending a bit more money on a cold cut chop saw like this: https://www.amazon.com/DEWALT-DW872-14-Inch-Multi-Cutter-Saw/dp/B0000302QS
It's more precise and you get much cleaner cuts.
Speed square + clamp of your choice + cordless saw with metal-cutting blade.
Or use a speed square to mark your cut with a pen and then freehand cut with an angle grinder. Following a line is a lot easier than just winging it.
This.https://www.amazon.com/PORTER-CABLE-PCE700-Amp-Chop-Saw/dp/B00NI2CF28/ref=sr_1_3?s=power-hand-tools&ie=UTF8&qid=1474605155&sr=1-3&keywords=chop+saw
That's how they do it in the field, as far as oilfield and fencing go (which is 99.9% of pipe use).
I have a Milwaukee 14" carbide dry saw. It can cut perfect angles. In fact, it leaves a machined finish, and straight from the factory is dead nuts in every aspect of the cut. I can cut 4" sch40 in around 30 seconds and 6" sch40 in around 50-60 seconds. Take a look at them, if you can afford it, they're great.
Never EVER EVER just have one cutting tool. I rarely cut 4" ANYTHING, but all my equipment is capable of it.
Main saws: Milwaukee 14" dry saw. Street price is around $500
http://www.amazon.com/Milwaukee-6190-20-14-Inch-Cutoff-Machine/dp/B00023S336
Milwaukee 8" dry saw (handheld): Street price $350
http://www.amazon.com/Milwaukee-6370-21-8-Inch-Cutting-Circular/dp/B0000WUQI4/ref=pd_sim_hi_6
HF 4"x6" bandsaw I've put hours into making perfect. I use this one for thick thick pieces, hardened steels, and larger aluminum sections of I have time. The carbide saw cuts aluminum ridiculously fast, but needs a different blade + lube. If I'm too lazy to change blades and baby sit, I throw it in the bandsaw.
I also have a big table I built for it and use it as a vertical bandsaw for precise cutting of smaller sections and scroll saw use.
Milwaukee BIG sawzall
Milwaukee porta-band bandsaw (jigsaw)
Mikwaukee m12 jigsaw
grinders with zip disks
Plasma
Torches oxy propane and oxy ace
and 2 regular chop saws
I'd use a cutoff saw, even a harbor freight one for 110 cuts.
https://www.amazon.com/DEWALT-D28715-14-Inch-Quick-Change-Chop/dp/B000HHWWES/ref=sr_1_1?ie=UTF8&qid=1500131411&sr=8-1&keywords=dewalt+d28715
Metal Drop saw: https://www.amazon.com/PORTER-CABLE-PCE700-Amp-Chop-Saw/dp/B00NI2CF28/ref=sxin_2_ac_d_rm?
I am showing 242.95 Damn saws are expensive.. Doubt my 73 dewalt miter box would handle cutting thick metal..
Were you potentially thinking of this one: http://smile.amazon.com/Evolution-Power-Tools-RAGE3-Multipurpose/dp/B0030M2TCC/ref=sr_1_1?ie=UTF8&qid=1419187986&sr=8-1&keywords=rage+3&sa-no-redirect=1