Reddit mentions: The best power oscillating tool blades

sorry, I now understand my own words 😂 but I meant a different electric tool. It’s perfect for corners like this because the tool is thin and it’s working by oszillation. You can cut tiles and wood easily.

https://www.amazon.com/Chicago-Pneumatics-68303-Oscillating-Multifunction/dp/B0085GEJ7Q/ref=mp_s_a_1_4?ie=UTF8&qid=1536261118&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=multitool+electric+oscillating&dpPl=1&dpID=51dnvFKi7CL&ref=plSrch

I'd remove the old grout and replace it with a quality grout that matches the material specifications. A multitool has a great grout removal bit and the tools aren't expensive.

https://www.amazon.com/DEWALT-DWA4220-Oscillating-Fastcut-Carbide/dp/B00FRMZVMI/ref=sr_1_1?crid=1NLC0YQMPX7OZ&keywords=grout+removal+multitool&qid=1572191084&sprefix=grout+removal+multi%2Caps%2C180&sr=8-1

Never buy the harbor freight version of this. The blade changing alone will drive you insane. You don't need the Fein but a good Rockwell is totally worth the extra money with the quick change blades.

Source; I've owned both.

The best way to cut a nail flush with the wall with very little damage to the walls and cabinets is with an oscillating multitool.

​

You should give our bi metal oscillating saw blades a try. You can find them on our website or on Amazon.

​

According to Amazon, they are the highest rated oscillating tool blades. They are rated higher than all the top name brand companies on Amazon.

​

​

I think that's up to the individual brand cause I've seen the little holes on the black ones. But if you are doing a lot of these, they make a oscillating saw attachment to easily make the hole.

https://www.amazon.com/Qbit-SQ1000-S-LV-Oscillating-Multi-Tool-Low-Voltage/dp/B074ZP362W/ref=sr_1_3?keywords=low+voltage+hole+saw&qid=1566675700&s=gateway&sr=8-3

If it's one of the vibrating type, there are blades that work. I have some that came with mine that say metal/wood. I've used it on only a few nails, but it does work.

No idea what's in the UK.

like this

kind of like this? https://www.amazon.com/SQ1000-S-Oscillating-Multi-Tool-Single-Outlet/dp/B01GKKE2W0

If you have an oscillating tool, the proper blade will make short work of removing the old grout:

https://www.amazon.com/DEWALT-DWA4220-Oscillating-Fastcut-Carbide/dp/B00FRMZVMI

In case anyone wants to buy it here's the link

https://www.amazon.com/dp/B00QL51DRW/ref=cm_sw_r_cp_apa_PzXWzbVDTHAJ0

https://www.amazon.com/dp/B01GKKE2W0/ref=cm_sw_r_cp_awdb_t1_BiUgDbZ2QED14 others are available. I've heard of a two gang one too.

Use Acetone (like goo off) with:

If you have a multi-tool:

https://www.amazon.com/Dremel-MM600-Multi-Max-Rigid-Scraper/dp/B001IZT520/ref=sr_1_3?ie=UTF8&qid=1491324466&sr=8-3&keywords=multi+tool+scraper


If you have a Reciprocating Saw:

https://www.amazon.com/Scraper-Scraping-Attachment-Reciprocating-Multi-Pack/dp/B002GP7GBI/ref=sr_1_1?ie=UTF8&qid=1491324593&sr=8-1&keywords=reciprocating+scraper

If you don't have either, you can pick them up from a harbor freight for fairly cheap.

Chinesium blades.

Oh but they do!

https://www.amazon.com/Double-Outlet-SQ1000-D-Oscillating-Multi-Tool/dp/B071J8TJVK/ref=mp_s_a_1_4?keywords=oscillating+tool+box+cutter&qid=1569617738&s=gateway&sr=8-4

The also make undercut grinding tools for a dremel, so you can get under there before grinding flush.

http://www.amazon.com/Dremel-MM422-4-Inch-Multi-Max-Metal/dp/B001GNC8SW

very easily it could damage the tile. You could get one of these or if you want you could us a multi tool with one of these

order these you won’t regret it