Sorry not get back to you sooner was really busy yesterday. The 96 model think would have had cantilever brakes as stock, V-brakes were brand new when this came out, and prety sure the Indy forks didn't come out on bikes until 97 model year.

So parts list of stuff to buy

Cassette:

https://www.amazon.com/SunRace-8-Speed-Nickel-Plated-Cassette/dp/B00DI65HGU

Chain:

https://www.amazon.com/X8-99-Bicycle-Chain-32-Inch-Silver/dp/B0013BV540

You might want to buy two you will want to carry a spare chain on tour

Tires:

https://www.amazon.com/Maxxis-Crossmark-Black-Fold-Tires/dp/B00GHTQ7Q4?th=1&amp;psc=1 (might find cheaper elsewhere, but you want the dual compound/DC ones with the EXO casing ideally - there are cheaper options for tires that would work than these but I think it's one area it's not so good to cheap out on)

Shifters:

https://www.amazon.com/SHIMANO-SL-M360-Acera-Shifter-Speed/dp/B001ON6VIW

(or find some vintage 8-speed XT/LX ones from eBay, they are a little nicer)

Brake pads:

https://www.amazon.com/Kool-Stop-Compound-Mountain-Linear-Threaded/dp/B001CLSWKQ

These should make a decent improvement to braking power especially in the wet, you could bring the old pads on the tour as spares/backups if they still work OK and have life left (always want to have at least a pair of spare pads)

New cables:

https://www.amazon.com/JAGWIRE-MOUNTAIN-SHOP-KIT-Derailleur/dp/B01DJGUEE8

You'll need at least new inner cables to install new shifters, and probably a good idea to replace the housing too, though you need either really good cable cutters or a Dremel/rotary tool with a cut-off wheel to cut housing, or get a bike shop to cut it to length. Not suggesting white colour that was just the first link I saw though it might look pimp.

Tools:

You could get a tool kit like one of these

https://www.amazon.com/dp/B00CW911XW/ref=emc_b_5_t

https://www.amazon.com/dp/B00CW911XW/ref=emc_b_5_t

https://www.chainreactioncycles.com/nz/en/x-tools-bike-tool-kit-18-piece/rp-prod40997

Or you could buy a multitool that would be good for bringing on the tour

https://www.amazon.com/Vibrelli-Bike-Multi-Tool-V19/dp/B06XGWMGB9

And extra stuff like cassette tool and chainwhip and tire levers individually:

https://www.amazon.com/Oumers-Freewheel-Sprocket-Lockring-Maintenance/dp/B07GSRJGP3

https://www.amazon.com/Schwalbe-1847-Bicycle-Tire-Levers/dp/B000UAQL6C

That might be the way to go.

That's not everything you'd need to go touring and stuff like the bars and saddle are a lot about personal taste but should be good to get you started.

Apologies for using amazon.com links I'm too used to helping Americans on here but hopefully can get them on the .ca site. Chain Reaction that I linked the toolkit from (would be confident that's the best out of those three kits I have some of the tools from it) in the UK can be a good place to order stuff from

u/SgtBaxter · 1 point r/cycling

If you're doing any decent offroading and wearing regular shoes you'll really benefit from a nice pair of platform pedals with pins. When I'm not riding my clipless pedals, I put on my Wellgo MG-1 platforms, they're great and inexpensive.

Yeah, they can be shin grinders if you're not careful but you'll have more control, power and crash less.

Also, I recommend buying a KMC chain. Less expensive, comes with a quick link, and they make the chains for Shimano/etc to begin with.

u/Javbw · 0 points r/cycling

If it is a 26" moutntian bike, get some Schwable marathon tires. They are excellent tires for most beginners riding around in most road/rough road conditions. Don't get some 15$ tire. Some basic BBB brake pads will be fine - nothing fancy. Get a chain while you're at it. For people unsure of what seat to get, I'd recommend on the the Tioga accentia line of seats, but they don't seem to be common in the US. You don't want one that is soft and spongey - even "gel" saddles should be very firm (similar to the feeling of the bicycle tire), and you want one to match your tailbone size. They make saddles in varying sizes (ladies have a wide pelvis, so their saddles are wider than all others, for example).

Remember, old bikes usually need 3 things: grease, cleaning, and a new chain (8sp linked, get the proper one for you). Dry bearings in the hubs/pedals are usually the worst.

Take you bike to a local bike shop and have them at least look at it. They can help you get the tires and seat. Give the 700c tires to the mechanic there (if they are not cracked up along the sides, otherwise toss em).

Related categories:

Reddit mentions of KMC X8.99/X8 Bicycle Chain (1/2 x 3/32-Inch, 116L, Silver)

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Found 5 comments on KMC X8.99/X8 Bicycle Chain (1/2 x 3/32-Inch, 116L, Silver):

Interested in what Redditors like? Check out our Shuffle feature