Reddit mentions: The best sheet metal screws
We found 13 Reddit comments discussing the best sheet metal screws. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 13 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Torx w/Pin Tamper Proof Security Button Head Sheet Metal Screws 18-8 Stainless Steel T-25 - #10 x 3/4-25 Pieces
- Torx button head sheet metal screws are best when used with metal to wood or metal to metal applications.
- Used for securing materials from being tampered with, they are also used in food prep and processing areas.
- Tamper proof screws are used to deter unwanted screw removal or tampering. Screw removal is difficult without the matching driver.
- You will often see security screws used in bathroom stalls and other public locations.
- 18-8 Stainless steel star drive button head sheet metal screws are harder than most materials easing the installation process.
Features:
Specs:
Color | Silver |
Number of items | 25 |
Size | #10-12 x 3/4" |
2. Stainless Steel Sheet Metal Screw, Plain Finish, Flat Head, Phillips Drive, Self-Drilling Point, Right Hand Threads, Inch
Pointed end and widely spaced threadsStainless Steel is suitable where formability and cost are important considerationsFlat head style allows fastener to sit flush to the surfacePhillips drive is designed to cam out under too much torque
3. Torx w/Pin Tamper Proof Security Button Head Sheet Metal Screws 18-8 Stainless Steel T-25 - #10 x 1-1/2-25 Pieces
- Torx button head sheet metal screws are best when used with metal to wood or metal to metal applications.
- Used for securing materials from being tampered with, they are also used in food prep and processing areas.
- Tamper proof screws are used to deter unwanted screw removal or tampering. Screw removal is difficult without the matching driver.
- You will often see security screws used in bathroom stalls and other public locations.
- 18-8 Stainless steel star drive button head sheet metal screws are harder than most materials easing the installation process.
Features:
Specs:
Color | Silver |
Number of items | 25 |
Size | #10-12 x 1-1/2" |
4. Stainless #10 X 3/4" Tek Screw (100 pcs)) Hex Washer Head Self Drilling Sheet Metal Tek Screws with Drill Point, 410 Stainless Steel, Self Driller, 100 Pieces
- Driver Size: 5/16" Hex
- Tensile - 180,000 psi, Hardness - 40 Rockwell C
- Type BSD is a tapping screw with spaced threads and a drill point which drills its own hole
- Great for using on Gutters!
- #3 Drill Point
Features:
Specs:
Height | 2.25 Inches |
Length | 3.5 Inches |
Number of items | 100 |
Size | #10 x 3/4 inch |
Width | 1.5 Inches |
5. Metal ROOFING SCREWS: (250) Screws x 2" ZINC Hex Washer Head Sheet Metal Roof Screw. Self starting/self tapping metal to wood, sheet metal roofing siding screws ~ EPDM washer. Metal Roof screw with colored head ~For corrugated roofing
- FITS BIG ROLL: Max. length of paper roll is 4.92-inch. Holds even mega-sized rolls of toilet tissue. Large stainless steel knob at the bar end prevents toilet paper roll from falling off.
- RUSTPROOF: The paper holder (bracket and screws included) is constructed from high quality SUS 304 Stainless Steel to protect against corrosion & rust. Ideal for humid environments such as bathroom and kitchen.
- ROTATE PROOF: Our toilet paper holder has unique slot design with screw tightening on the bracket to prevent from rotation. NO wobbling nor dropping off! Just enjoy this sturdy and heavy duty design.
- EASY INSTALLATION: ONE piece, NO assembly required. Install either on walls or even under cabinet. Package comes with mounting screws, anchors, allen tool and bracket. Use included fixing screws to mount holder securely. Screw mounting can be applied to all the smooth walls including but not limited to tile walls, painted walls and marble walls.
- TWO INSTALLATION OPTIONS: You can choose vertical or horizontal(right or left) installations according to your need.
Features:
Specs:
Size | 2 inches |
6. Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Hex Drive, Type AB, #6-20 Thread Size, 1/4" Length (Pack of 100)
Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywoodSteel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a ...
Specs:
Color | zinc |
Height | 0 Inches |
Length | 0.25 Inches |
Number of items | 100 |
Size | #6-20 |
Weight | 0.02 Pounds |
Width | 0 Inches |
7. #10 X 1-1/2" Stainless Phillips Flat Head Sheetmetal Screw (1/2" to 2" in Listing) 100 Sheet Metal Screws, 82 Degrees (#10 x 1-1/2")
- 18-8 Stainless Steel for outdoor or damp applications
- 100 pieces per package
- Phillips drive sheet metal screw
- #10 x 1-1/2 inch
- 82 Degree Head
Features:
Specs:
Size | #10 x 1-1/2" |
8. 18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type B, #10-16 Thread Size, 1-1/2" Length (Pack of 25)
- Type B point has a blunt tip with fine spaced threads that are suitable for forming threads in holes drilled in 0.015"- to 0.050"-thick metals as well as nonferrous castings, plastics, and impregnated plywood
- 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
Features:
Specs:
Height | 0 Inches |
Length | 1.5 Inches |
Number of items | 25 |
Release date | May 2017 |
Size | #10-16 |
Width | 0 Inches |
9. Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 3/8" Length (Pack of 100)
- Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood
- Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a reflective appearance
- Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened
- Slotted drive has a linear slot for use with a flat-blade driver
Features:
Specs:
Color | zinc |
Height | 0 Inches |
Length | 0.375 Inches |
Number of items | 100 |
Size | #6-20 |
Weight | 0.22 Pounds |
Width | 0 Inches |
10. #8 x 3/4" Hex Washer Head Self Drilling Sheet Metal Tek Screws Qty 100, 410 Stainless Steel, Self Driller Number 8 Size x 3/4" Length by Fastenere
- Driver Size: 1/4" Hex
- Head Diameter: 0.348"
- Head Height: 0.141"
- Length measured from underneath the head: 3/4"
- Screw Size: #8 (0.164")
Features:
Specs:
Number of items | 100 |
Size | 0.75 inches |
11. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread Size, 3/8" Length (Pack of 100)
- Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood
- Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a black reflective appearance
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
Features:
Specs:
Color | black |
Height | 0 Inches |
Length | 0.375 Inches |
Number of items | 100 |
Size | #4-24 |
Width | 0 Inches |
12. #8 x 1/2" Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal Attaches Wire Lath to Metal Studs - Box of 100
- HIGH QUALITY ZINC-PLATED STEEL: Phillips Modified Truss Head Sheet Metal Screw made of 100% high quality durable steel with hard Zinc Plating, built to last years with no wear and tear
- RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener
- CONVENIENCE: Phillips Modified Truss Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications
- For use in Sheet Metal Steel, Attaches Wire Lath to Metal Studs or Metal or Aluminum to Metal or Aluminum. Installed with #2 Phillips Driver
- Amazon Protected Money-Back Satisfaction Guaranteed
Features:
Specs:
Size | #8-18 Thread x 1/2" Long |
13. The Hillman Group 3142 10 x 3/4-Inch Oval Phillips Trim Screw with Washer, 20-Pack,Black Phosphate
- Designed for joining thin pieces of metal, wood, or fiberglass
- No pre-drilling required
- Install with a Phillips screwdriver
- Included variants come in #8 & #10 diameters
- Parts come in corrosion-resistant chrome & black phosphate finish varieties
Features:
Specs:
Color | Black Phosphate |
Height | 1.5 Inches |
Length | 2.4 Inches |
Number of items | 1 |
Size | 0.75 inches |
Width | 1.4 Inches |
🎓 Reddit experts on sheet metal screws
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where sheet metal screws are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
For the bike pump I would recommend these conduit clamps and some ati-tamper screws . It will not fully prevent theft but it will act as a deterrent. You could also add some solar lights like these to help light up the area so a biker could fix there bike at night and help deter theft.
Not at all. Self tapping meaning they drill the hole on their own. Its just a screw with a tip that kinda looks like a drill bit. Like this. Good on you for DIY. These are really easy to install and you shouldn't have any issues at all.
> Security torx
https://www.amazon.com/Tamper-Security-Button-Screws-Stainless/dp/B00FAUQY3C/ref=pd_sim_468_4?_encoding=UTF8&psc=1&refRID=23HV2WXZ5WZBJ66ZJT02
Looks like that is a good option
Get a strong rare Earth magnet. If it sticks all the way down a stud you've got steel studs. If it only sticks in random spots then it's just sticking to the sheetrock screws in a wood stud. If it's steel studs a self tapping steel screw would work. I don't know what you have in Australia but Tek screws are great. You could screw down some kind of a hook.
Oh, beautiful. So what you're telling me is that these are my meal tickets:
https://www.amazon.com/gp/bestsellers/industrial/16410591/ref=pd_zg_hrsr_indust_1_4_last
https://www.amazon.com/Metal-ROOFING-SCREWS-starting-corrugated/dp/B00YZCUPWM/ref=zg_bs_16410591_11#feature-bullets-btf
The latter I can get for like a cent each. And the estimator says they move about a hundred a month.
sheet metal screws work best for this.
http://www.amazon.com/Steel-Plated-Washer-Thread-Length/dp/B00GIA68S4/ref=sr_1_1?ie=UTF8&qid=1419813939&sr=8-1
I would suggest a screw like this, which can be used with it's plug for drywall or cement, and also does well in wood, because the threads run the entire length of the screw. I’ve used them in wood and in drywall with plugs many times. The plug for the cement would require a masonry bit provided by the buyer, same screw. https://www.amazon.com/Stainless-Phillips-Sheetmetal-Listing-Degrees/dp/B01EQI5GF0/ref=sr_1_4?ie=UTF8&qid=1475010126&sr=8-4&keywords=Stainless+Steel+Flat+Head+Phillips+Sheet+Metal+Screw%2C++2
This one seems fine: http://www.amazonsupply.com/dp/B00GID0PSA?ref_=sr_1_1_txt&filterBy.feature_five_browse-bin=3177285011&filterBy.feature_two_browse-bin=2292861011&filterBy.item_length_string-bin=1-1%252F2+inches&filterBy.thread_size=%252310-16&filterBy.feature_seven_browse-bin=5485702011&filterBy.grade_rating=18-8
But see if you have a Home Depot nearby or order online, this is the exact one we use: http://www.homedepot.com/p/Everbilt-10-x-1-1-2-in-Stainless-Steel-Pan-Head-Phillips-Drive-Sheet-Metal-Screw-20-Piece-800232/204275051?N=5yc1vZc2bwZ402Z1z0sfooZ1z0sg11Z1z0sg18Z1z140zg
Get some cheap comfy shoes and screw some 3/8 or 1/2 (depending on your shoe, don't want to go too deep) sheet metal screws into the bottoms. It'll work better than any commercial product for what you're looking for, and be way cheaper. I put about 15 in each shoe and it'll last all winter running on ice and snow. Just replace the screws if they fall out or wear down too much.
https://www.amazon.com/Plated-Washer-Slotted-Thread-Length/dp/B00GI9UDMC/ref=sr_1_4?ie=UTF8&qid=1484071184&sr=8-4&keywords=sheet+metal+screws
Those are what I have, the pack has lasted me three Utah winters of ultra run training so far. An electric drill with a 1/4 socket will easily do both shoes in about 1 minute.
I build sunrooms in the U.S. We use robertson screws for our visible fasteners. Sometimes, we use hex heads depending on the sunroom manufacturer.
Yeah, I figured that much, but couldn't get the specific screw. Would this (https://www.amazon.com/Plated-Finish-Phillips-Thread-Length/dp/B00GI8H8CQ) do?
Unfortunately, they are pretty flat and has no piece to really have a grip.
I'm trying to get one of those screw extractors, but none of them are small enough to get the 2mm screw out...
I actually used self-tapping metal screws. Plus, I have a Porter Cable impact. Those screws went in so fast!
Edit:
I bought them at Lowes a while back. These are basically what I have.
https://www.amazon.com/dp/B0768MR94M/ref=cm_sw_r_cp_apa_i_c6JUCbHKRPKZ2
It is in the description in the Imgur album.
> Screws with Hook and Loop Ties
>
> The screws have built in washers and are meant for vehicle trim. They are screwed through hook and loop ties to secure the wires to the desk.
Specifically:
http://www.amazon.com/dp/B004C4U1HC/
http://www.amazon.com/dp/B00HYM0HWI/