Reddit mentions: The best wheel studs
We found 15 Reddit comments discussing the best wheel studs. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 11 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. 10pcs Extended Black Wheel Stud Conversion - 12x1.5 to 12x1.5, 80mm Total Length, 63mm Shank Length - Compatible with Select BMW Vehicles (Ensure Vehicle uses 12x1.5 Bolts)
- [BENEFITS] Authentic StanceMagic Stud Conversions. Allows for faster and easier wheel changes. Allows the use of aftermarket Tuner and Racing Lug Nuts. Visit our store to see our wide selection of lug nuts, various types and colors available.
- [MANUFACTURING] Our custom auto accessories are manufactured with strong cold forged Metric Grade 10.9 steel. Additional Heat Treating ensures dependable strength, durability, and performance. Machine precision threads ensure the best fit on the vehicle's hub and lug nuts. The special zinc coating provides ultimate corrosion, rust, and scratch resistance.
- [SPECIFICATIONS] Set of 10 - Black Hub Studs | 12x1.5 Vehicle Side Thread Size | 12x1.5 Wheel Side Thread Size | 63mm Thread Length | 80mm (~3.1in) Total Length | See Diagram for additional details. NOTE: Lug Nuts are NOT Included.
- [INSTALLATION] Requires standard tire repair tools, allen wrench / hex tool, torque wrench, and socket. While installation is simple and most knowledgeable buyers can install themselves, we recommend professional installation especially if it is your first time installing auto accessories. Apply thread-locking fluid to the studs (short thread end) and torque to 20 ft/lb. Lug nuts should be torqued to OEM specifications. For your safety retorque all hardware (studs and nuts) after 25-50 miles.
- [FITMENT] Only fits European vehicles with 12x1.5 lug bolts. Compatible with 02-05 Mini Cooper. Compatible with BMW prior to 2012 - 128i 135i 318i 318is 318ti 323ci 323i 323is 325ci 325i 325is 325xi 328i 328xi 330ci 330i 330xi 335d 335i. Also compatible with BMW 525i 528i 530i 535i 535i GT 535i xDrive 545i 550i M3 M5 M6 Z3 Z4 645Ci 650i 840ci 850ci 850i. IMPORTANT to Verify Year & Model in Description.
Features:
Specs:
Color | Black |
Height | 3 Inches |
Length | 6 Inches |
Size | 3.1 inch Length |
Weight | 1.25 Pounds |
Width | 6 Inches |
2. Thexton THE499 Wheel Stud Pilot Pin
- Fits: Audi, BMW, VW, Mercedes and Porsche
- Vehicles with 14 millimeter wheel lug bolts
- Allows technician to hang wheel and tire without having to balance wheel on lip of hub
- Country of Origin : United States
Features:
Specs:
Height | 1 Inches |
Length | 8 Inches |
Number of items | 1 |
Release date | September 2013 |
Weight | 0.3 Pounds |
Width | 5 Inches |
3. OEM TOOLS 24233 Wheel Stud Alignment Pin, 8 Piece
- FAST AND EASY USE: This tire changing tool set makes installing wheels much easier on vehicles that use wheel bolts instead of studs or lug nuts; Tire hanger works when replacing damaged or broken bolts
- PREVENTS INJURY AND DAMAGE: These hanger bolts align the holes and secure the wheel to the hub; Minimize the risk of injuries and damage by preventing the tire wheel from falling; Eliminate the struggle to balance the wheel studs
- FITS A VARIETY OF VEHICLES: This wheel guide tool is useful for vehicles without bolts or studs, including older models of European cars; Wheel hanger also works with many newer vehicles that are missing bolts or studs
- MULTIPLE SIZES: This wheel alignment tool includes two sets of the 12 mm x 1.5, 12 mm x 1.25, 14 mm x 1.5, and 14 mm x 1.25 threaded wheel pins; Alignment pins work with many tire wheels and vehicles
- BONUS FEATURES: These automotive bolts are color coded for easy identification of the wheel stud pilot pin set; Wheel hangers come in a sturdy blow mold case for safe keeping once the wheel has been installed
Features:
Specs:
Color | Others |
Height | 1.6 Inches |
Length | 10.2 Inches |
Number of items | 1 |
Release date | February 2017 |
Size | One Size |
Width | 4.8 Inches |
4. dynofit 12x1.25 Wheel Lug Studs Bolts for Wheel Spacers, 20PCS ET 28mm Shank 17mm Hex 48mm Length Conical Seat for 2015-2018 Renegade, 2018-2019 Compass, 2014-2019 Cherokee and More
- Application: wheel spacers installation on 2013-2016 dodg/e dart and 2015-2017 chrysler 200,enter your maker and year in system garage filter, then check fit(locates Top Left of your desktop or Center of your mobile)
- Short Headed:When you install new wheel spacers and find your stock bolts stand out of the spacers hole and you need this small head set, Besides, if you need a OEM big head set, you can buy ASIN B09WMP82J7
- Specs: M12x1.25 thread pitch, 28mm shank, 48mm length, 17mm hex, 60 conical seat, use original wrench
- Comes: 20pcs as pictured, go to "dynofit" 5x110 1" wheel spacers if needed,asin:B093CTTSN7
- Brand Guarantee: life-long warranty and contact us if meet any problems, reply in 24hrs
Features:
5. 200PCS 12mm Carbide Tire Studs/Spikes for Tires/Screw Studs/Screw Snow Wheel Tyres Studs for Car,Bicycle,Bike,Motorbike Tires in Winter
Best material: Made of hard metal,super strong and durable in use.Huge Benefit: It has the low ground pressure and it’s enviromentally with minimum impact.Quick installation: It is easy to install with certain drill, can match well with vehicle tires.Installation tool is included.How to choose: Ch...
Specs:
Color | Silver |
Size | 4.7 x 3.1 x 1.2 inches |
6. ABN Wheel Hanger Pin Set - 2 Pack Wheel Stud Alignment Guide Tool M14 x P1.5 Wheel Stud Pilot Pin Wheel Mounting Guide
- SERVICE YOUR VEHICLE: The ABN M14 x P1.5 Tire Hanger Wheel Alignment Tool Kit allows you to line up the wheel with the correct hole during installation or removal of rims on the hub; The 2 pack wheel hanger alignment pins also help protect carbon-ceramic brake system rotors during installation
- FITS YOUR RIDE: Wheel stud pilot pins are compatible with most BMW, Chrysler, Ferrari, Fiat, Ford, GM, Hyundai, Land Rover, Lamborghini, Opel, Mercedes, PSA, Renault, Saab, VAG, and Volvo vehicles or wherever M14 x 1.5 metric wheel bolts are used
- BUILT TO LAST: Durable metal construction provides maximum strength and longevity; Wheel stud alignment tools will not bend or break; Prevents damage to your wheel, brake discs, and brake calipers and reduces the chance of cross-threading the wheel bolt
- EASY TO USE: Screw the wheel alignment pin tool into your wheel hub; Recessed area on the shaft to keeps your wheel from sliding off the wheel hanger studs; Simply screw in remaining nuts to secure tire into place
- PACKAGE CONTENTS: Wheel mounting guide set includes (2) wheel hanger bolts so you can keep one alignment pin in your car and the other in a tool chest; 6-inch (15.2cm) length and M14 x 1.5 thread pitch
Features:
Specs:
Height | 1.49999999847 Inches |
Length | 8.7007873927 Inches |
Number of items | 2 |
Size | 8.7 |
Weight | 0.7054792384 Pounds |
Width | 2.90157480019 Inches |
7. Lisle 13950 3-Pair Wheel Stud Pilot Pin Set
- Three pairs of metric threaded wheel stud pilot pins allow you to hang the wheel without having to balance the wheel on the small lip of the hub
- This helps prevent the wheel from falling and causing damage or injury
- Set includes 12mm x 1.5, 14mm x 1.25 and 14mm x 1.5 threaded pins
Features:
Specs:
Height | 1 Inches |
Length | 9 Inches |
Release date | May 2014 |
Weight | 1.69 Pounds |
Width | 6 Inches |
8. Lisle 22800 Wheel Stud Installer
- Use with a ratchet or impact wrench to pull the new stud securely in place
- Tighten the lug nut against the tool to pull the stud in place
- Works on most all automotive and light-duty truck wheel studs, import and domestic
- Position the tool over the stud shaft
Features:
Specs:
Color | United States |
Height | 1.25 Inches |
Length | 7.5 Inches |
Number of items | 1 |
Release date | January 2014 |
Weight | 0.05 Pounds |
Width | 4.75 Inches |
9. Kastar 755 6 Piece Wheel Stud Installer Kit
These components will install wheel studs on almost all foreign and domestic light trucks and SUVsSizes: 1/2" - 20, 9/16" - 18, 12mm - 1.75, 14mm - 1.5 plus the spacer and washer
Specs:
Height | 6.6 Inches |
Length | 6.8 Inches |
Number of items | 1 |
Weight | 1.45 Pounds |
Width | 1.1 Inches |
10. Steel Wheel Hanger Alignment Pin Guide Tool - Metric 12x1.5 Threads - Wheel Lug Bolt Automotive Mechanic Tool Compatible with Various BMW Mercedes Volkswagen, Wheel Mounting Guide Bolt M12x1.5 1pc
[BENEFITS] This wheel bolt pilot pin guide tool makes it easier for you to mount wheels and tires by lining up the lug holes of the wheels to the hub so you don't have to worry about balancing the wheels between your knees as you're trying to bolt them up to your car. Knurled end ensures a tight gri...
Specs:
Color | Silver |
Height | 0.5 Inches |
Length | 4 Inches |
Size | M12x1.5 |
Width | 0.5 Inches |
11. Greenfield SKS2-305B 305mm Stablizer Rear Stay-Mount Black Aluminum
For mounting on the rear chainstay (includes hardware)Painted black finish, 305 mm (for bikes 22" and over)Might not work on bicycles with disc brakesWill not work on bicycles with square, rectangular, or large diameter shaped tubingMade in the USA!
Specs:
Color | Black |
Height | 1.75 Inches |
Length | 15.25 Inches |
Number of items | 1 |
Size | true |
Weight | 0.84 Pounds |
Width | 2.25 Inches |
🎓 Reddit experts on wheel studs
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where wheel studs are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I've only had them about 2 years, but as far as what they can take goes they've definitely proven themselves. I got them to ease swapping between street tires and racing tires for autocross and track days. Never had any issues at all that would lead me to think they need replacing. I can't imagine how they'd wear any more than factory equipped lug studs would. The only difference whatsoever with them is that they're threaded on vs pressed in. If they're threaded on with the proper torque and loc-tited there's absolutely no reason they'll come out short of maybe if you hammer off a nut that was cross-threaded and then torqued on way too hard. In that case it would be convenient that they come out since that stud would beed to be replaced anyway, no matter if it's OE or a conversion. Pretty much all teams that race BMWs convert to studs to make wheel changes easier. The guy at the tire shop that warned against them probably has seen too many Pep Boys specials roll through where the owner uses lousy parts and more importantly doesn't bother installing them right.
I have these studs in a different length and these nuts from Precision European Motorwerks. ECS Tuning tends to have great parts too though so I wouldn't think twice about using their kits.
You should have gotten a set of these to ease the installation.
https://www.amazon.com/Thexton-THE499-Wheel-Stud-Pilot/dp/B002SWK3QY
Can't go wrong with a set of these
Guess you'll need this later:
​
https://www.amazon.com/Kastar-755-Piece-Wheel-Installer/dp/B0002SRG6Q/ref=sr_1_1?keywords=kastar+755&qid=1570747198&s=automotive&sr=1-1
one of these makes your life a lot easier... https://www.amazon.ca/Lisle-22800-Wheel-Stud-Installer/dp/B000ETUD22
Same principle as a stud installer
https://www.amazon.com/Lisle-13950-3-Pair-Wheel-Pilot/dp/B00HZNTCSG
https://www.amazon.com/OEMTOOLS-24233-Wheel-Alignment-Piece/dp/B01FYG6AJ4/ref=mp_s_a_1_2?keywords=wheel+alignment+studs&qid=1573281319&sr=8-2
https://www.amazon.com/ABN-Piece-Hanger-Automotive-Mechanic/dp/B01M0FGQC9/
Here are some
https://www.amazon.com/200PCS-Carbide-Spikes-bicycle-Motorbike/dp/B078V3XVJL
dynofit 12x1.25 Wheel Lug Studs Bolts for Wheel Spacers, 20PCS ET 28mm Shank 17mm Hex 48mm Length Conical Seat for 2015-2018 Jeep Renegade, 2018-2019 Jeep Compass, 2014-2019 Jeep Cherokee and More https://www.amazon.com/dp/B07GV6L2WW/ref=cm_sw_r_cp_api_i_E6muDbCPAF85K
Wheel hangers make it so much easier. I just line one of the holes at the 12 o'clock position, screw in the wheel hanger rod, then slide the wheel down the hanger rod. Screw in the remaining 4 lugs, unscrew the rod, and finish it up.
https://www.amazon.com/Steel-Wheel-Hanger-Automotive-Volkswagen/dp/B00MWAQ9MO
I recently installed this kickstand on my Trek 520 Disc. I haven't used it on a fully loaded tour yet, but it's doing a fine job of supporting the empty bike. The bolts that were included with the kickstand were too wide for the mount on the bike, but I had a couple extra screws from unused water bottle cages that got the job done.
Although before I found that one, I bought this one and then realized it's not compatible with disc brakes. Unfortunately, it's not eligible for returns on Amazon, so now I'm stuck with a kickstand I don't need or want. So if you have rim brakes on your bike, I'd be willing to send it your way if you can just cover the shipping costs.