Reddit mentions: The best fencing railings & pickets
We found 39 Reddit comments discussing the best fencing railings & pickets. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 20 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Simpson Strong Tie FPBB44 Black Powder-Coated 12-Gauge E-Z Base
- Allows easy installation of 4x4 wood posts on existing concrete
- Easy to install in concrete with 1/2 in. diameter anchors
- Made from 12 gauge steel
- Black Powder-Coat. Post bases do not provide adequate resistance to prevent rotation about the base and therefore are not recommended for non-top-supported installations such as fences or unbraced carports
- Install with 1/4 in. SDS screws or 1/4 in. HDG lag screws
Features:
Specs:
Color | Black |
Height | 6.83 Inches |
Length | 3.83 Inches |
Weight | 2 Pounds |
Width | 5.6 Inches |
Size | 1 Each |
Number of items | 1 |
2. Magpul MAG406-BLK MOE Polymer Rail Section, 5-Slot, Black
- Designed for Use with MOE hand Guards and for ends
- Size L2 (5 slots), max overall length of 2.5 inch
- Mounting screw center-to-center of 1.2 inch
- Made in USA
- Designed for use with MOE Hand Guards and Forends
- Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc.
- Features beveled ends to reduce snagging and eliminate sharp corners and edges
Features:
Specs:
Color | Black |
Height | 8 Inches |
Length | 6 Inches |
Weight | 0.02 Pounds |
Width | 8 Inches |
3. Stainless Steel Square Shape Base Long Neck Floor Wall Flange Component, Mount Terminal End Post Holder and Top Hand Rail, for Cable Railing Deck (for Terminal Square Posts)
- Marine Grade 316 - Excellent resistance to corrosion!
- This high quality component will give you the finishing touches you need for your cable railing deck
- Helps provide stability and support for your square stainless steel deck mounted posts
- Secures Square Pipe to Floor
- Heavy Duty Stainless Steel for Strength and Durability
Features:
Specs:
Color | Chrome |
Height | 2.63 Inches |
Length | 3.5 Inches |
Weight | 0.9 Pounds |
Width | 3.5 Inches |
Size | Terminal Post |
4. Deckorators Aluminum 26" Balusters - Black - 100 Pack (Deckorators DB52613)
- Deckorators 26" long aluminum round deck balusters are designed to build a 36" high rail.
- Each baluster has a diameter of 3/4" and is made with 18 gauge aluminum.
- Designed to install 2.5 balusters per linear foot.
- Powder-coated with AAMA2604-compliant material.
- Limited Lifetime Warranty.
Features:
Specs:
Color | Black |
5. Swageless Lag Screw Terminal Stainless Steel Marine Grade T316 for 1/8" Cable (Lot of 10)
These high quality stainless steel cable railing hardware kit is perfect for planning your own cable railing project, good for indoor or outdoor applicationsNo Special Tools Required enables a quick and easy Installation which saves time. You'll be enjoying cookouts with friends on your deck in no t...
Specs:
Height | 1 Inches |
Length | 5 Inches |
Weight | 0.5 Pounds |
Width | 1.75 Inches |
Size | Lot of 10 |
6. Swageless Jaw Fork Terminal Stainless Steel 316 1/8" or 3mm (Lot of 2)
Quick and easy installationNo special tools requiredFits 1/8" or 3mm cableMarine Grade T316 Stainless Steel
Specs:
Height | 2 Inches |
Length | 3 Inches |
Width | 0.5 Inches |
Size | Lot of 2 |
7. Swageless Surface Mount Cable Turnbuckle Tensioner 2" Barrel for 1/8" Cable
Easy Installation! Swageless = no hand crimping tool needed to fasten to cable turnbuckle tensionerT316 'Marine Grade' Stainless Steel - Great Resistance and holds up against corrosionAdjust the pitch of your cable run 135 degrees with this toggle or do a straight runNEW 2" Barrel DesignFree shippin...
Specs:
Color | Silver |
Weight | 0.1 Pounds |
8. Prescott Plastics 3/4 Inch Round Black Vinyl End Cap, Flexible Pipe Post Rubber Cover (10)
- HOW TO FIT: Fits 3/4" (Outer Dimension) round tube or pipe which can stretch up to 1/16” larger for a snug fit without tearing or splitting. 1" deep / tall to provide a secure fit.
- EASY TO INSTALL: These Rubber Plugs for Holes easy to install ¾” inch push-on caps serve as a long-lasting solution for many household, outdoor, & marine boat dock projects including replacements for fencing railing posts, steel gate rail stopper, rod / rebar or wrought iron caps, thread bolt screw or nut safety, hub cap sheath, or finishing any round tubing project.
- FLOOR PROTECTION: These high-grade Prescott Plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions.
- PREMIUM QUALITY PLUG: Our PVC Rubber Caps are designed to hold up in all harsh weather conditions and high traffic areas.
- MADE IN USA: This Vinyl End Covers is specially designed and produced in the USA to maintain quality, endurance and durability
Features:
Specs:
Color | Black |
Height | 0.75 Inches |
Length | 0.75 Inches |
Width | 0.75 Inches |
Size | Pack of 10 |
9. Universal Forest Products 106096 3-1/2" Post Cap
- This product is easy to use
- This product is highly durable
- Manufactured in China
- Package Dimensions : 4" L x 4" W x 0.75" H
Features:
Specs:
Color | Natural |
Height | 0.004 Inches |
Length | 4 Inches |
Weight | 0.2 Pounds |
Width | 4 Inches |
Size | Pack of 1 |
Number of items | 1 |
10. Woodway Finial Cedar Wood Ball with Lag Bolt for Fence Posts, Deck, and Patio Railings, 3 Inch Diameter
- Ball finial made out of the highest quality Western Red Cedar wood which is naturally weather and rot resistant. Ball measures 3 inches wide by 4.64 inches high.
- Post finial is pre-fitted with a ¼ inch wide galvanized lag screw that measures 2.5 inches in length for easy application. Post cap will twist into place and stays secure.
- Finial can be used alone or mounted on top of another post cap for a unique look. Post cap can also be used for indoor applications.
- Extend the life of your fence posts by providing protection from water damage and sun. This post cap is made for durability.
- With its classic architectural design, this decorative finial adds a touch of class and elegance to your deck, patio fence, or post.
Features:
Specs:
Size | 3 Inch |
Number of items | 1 |
11. 4x4 Post Support Pro Version Table Leg Bracket (Actual Size 3.5"x3.5") Post and Screws NOT Included!
- Heavy Duty Version ▼ SOLD AS EACH....▼ ONE SINGLE POST SUPPORT ▼READ THIS FULLY TRIMMING IS REQUIRED ▼ PRO VERSION SCREWS NOT INCLUDED▼All Orders Upgraded Priority Mail. POST NOT INCLUDED! ▼ SCREWS NOT INCLUDED▼
- 4x4 Post Support table Leg Bracket (actual size 3.5"x3.5") POST NOT INCLUDED!
- ▼TRIMMING POSTS IS REQUIRED depending on post type. This product fits a standard 4 x 4 post (3.5" x 3.5")
- This product fits a standard 4x4 post ▼(actual size 3.5" x 3.5")▼ DO NOT FORCE POSTS INTO SUPPORTS!
- We live and work in Holly, Michigan and we provide a 100% Satisfaction and will jump through hoops for you at all times... Just please let us know of anything we can help with...It is users responsibility to adhere to local and state building codes. This product may not be acceptable in certain areas. Check your building codes. Use for Ground Floor Decking Only.
Features:
12. Bestbode Cable Railing Kit Deck 20 Pack for 1/8" Wire Rope with Cutter, High Grade Stainless Steel Heavy Duty kit for Stair Hardware and Deck Balusters Systems
Rustproof & Durable : This cable railing kit is made of high grade stainless steel, great resistance to rust and corrosion . Perfect for outdoor & indoor applications. Durable for decades long life time.Easy & Pretty : Easily install cable railing system . Do it yourself without professional skills....
13. ArkHardware for 3/16" Cable Threaded 1/4" Stud End Fitting Stairs Deck Cable Railing Rigging Hardware Hand Swage Stainless Steel Type 316 Commercial Marine Grade (for 3/16' CABLE-20 Studs)
ArkHardware 1/4" Threaded Stud End Fitting Package for 3/16" Cable Deck Railing Hand Swage Stainless Steel T316 Marine Grade1 ORDER= 20 HAND SWAGE STUD+ 20 HEX NUTS+ 20 FLAT WASHER+ 20 DOME NUT.Hand Swage. Stainless Steel Type 316 Marine Grade.Stud: A(cable)=3/16". B=UNC Threads=1/4"-20x1-7/8" .L=3-...
Specs:
Color | STAINLESS STEEL TYPE 316 |
Size | FOR 3/16" CABLE- 20 STUDS |
14. ASI ASIUK5N Din Rail Mounted Terminal Block, Screw Clamp (Pack of 50)
Rated for 30 Amps, 600 Volts.Universal DIN Rail Mounting Foot for 35x 7.5 Din Rail.Accepts 30 to 10 AWG Wire and only 6.2 mm wide.Large wire funnel entrycUL and UL approved
Specs:
Height | 1.830705 Inches |
Length | 1.673225 Inches |
Width | 0.244094 Inches |
Size | 1-(Pack) |
Number of items | 50 |
15. OZCO 54208 Laredo Sunset Lite 6x6 Post Base, (1 per Pack)
Includes: 1 Post Base Plate; 4 Decorative Plates; 8 Hex Cap Nuts; 8 each of 1/4-inch by 2-3/4-inch OWT Timber ScrewsBases are made of galvanized steel, then black powder coated with an attractive finishIncludes hardware for attaching base to post for standard installations3/16-inch thick hot dipped ...
Specs:
Height | 7.8 Inches |
Length | 1.77 Inches |
Weight | 5 Pounds |
Width | 7.28 Inches |
Number of items | 1 |
16. WELTEK Deck Cable Railing Kit, 10-Pack Threaded Stud Tension End Fitting Terminal & 105 Feet 1/8 Stainless Steel Aircraft Wire Rope - T316 7x7 Marine Grade
Deck Cable Railing Kit for indoor or outdoor applications(wood, steel, aluminum post on deck railing)Threaded stud: Overall Length: 3-7/8" - Thread Length: 1-7/8" - 1/4" - 20.Perfect for cable railing project, 7x7 cable is Sturdy, Long Lasting, and high tensile strength.Package: 10pcs threaded stud;...
17. Stainless Steel Wire Rope Aircraft Bicycle Cable Cutter,Up to 5/32"
- ★Using SK5 high carbon steel Seiko forging, durable, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do.
- ★Knife edge by a special heat treatment, cutting fast formation without fraying or smashing the ends. it not only cut the cutaway cables and ripcords perfectly also great for grommet removal.
- ★Product design user-friendly, easy to operate, can be used to cut off the edge of precision machinery.
- ★Labor-saving spring roll design, One-Handed Operation, easy operation, improve efficiency.
- ★Electroplated handle to resist rust, Durable PVC dipped handles for added grip.
Features:
Specs:
Height | 0.67 Inches |
Length | 7.8 Inches |
Width | 6.14 Inches |
18. Standard Galvanized Post Cap 2x4 (1-1/2" x 3-1/2") - 2 pack
- Heavy Duty Galvanized Post Cap
- Fits over a standard 2x4
- Creates decorative finish while preventing end rot and protecting your posts
- 1-1/2" x 3-1/2" x 5/8"
- Maintenance Free and is able to weather all seasons
Features:
19. Mini Cooper 82-71-2-148-014 RAILING CARRIER
- Genuine OEM - direct fit
Features:
Specs:
Number of items | 1 |
20. YardSmart 61109088 4X4X45 Traditional Post Jacket White Vinyl Railing, 4" x 4" x 45"
Slides comfortably over a post for an aesthetically pleasing lookLightweightLow-maintenanceMade in the USA
Specs:
Color | White |
Height | 45 Inches |
Length | 4 Inches |
Weight | 3.687 Pounds |
Width | 4 Inches |
Size | 4" x 4" x 45" |
Number of items | 1 |
🎓 Reddit experts on fencing railings & pickets
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where fencing railings & pickets are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
>That's a gorgeous fence
My wife would digress, she says the curve isn't centered. 2 flats on one side, 3 on the other.
>I am an idiot
C'mon you run trivia nights, I've seen you post here plenty. There are true idiots on this sub, and you're not one of them (IMHO)
>don't know if I could actually do that.
Don't know until you try. I didn't know until I tried, but I had some fencebuilding experience when my family still had ranches (mostly the old men yelling at me to carry wood, sand, nail, no cutting)
This is how I did it. Maybe I can lend a hand, I dunno. You'd have to entertain my wife and kids and maybe feed us or something. Maybe you could do the same for us sometime.
Tools: (mostly cheap harbor freight)
I started off by measuring. Once I had my measurements in, I took a long hard look at my neighbors fence (we have that picture) and copied the framing. I scaled it for my entryway.
Once I had the basic design down, I drilled in my post cement anchors. I used 4 of these Simpson Strong Tie Fence Anchors. Even after a year, the fence is still as strong as the day I made it.
After I had my posts up, I put the J screw hinge onto the posts and connected some cross members so the posts would shore up against each other.
I took what would become my gate frame, and put the other half of the j screw hinge in. Then I did one final measure now that I knew how much space the hinges took up.
Pulled the 4x4's off the hinge post, and built out the rest of my frame. I made sure to leave plenty of room at the bottom for the gate to swing freely. After the frames were complete, I re-hung them on the J hooks.
Once the frames were up, I began skinning them. I laid a 4x4 at the bottom to give myself spacing (Didn't want the skin scraping) and put up fenceboard. Throughout this entire process, I used deck screws with the star bit. These bits don't slip, and the screws are coated to sort of self lubricate themselves through the wood.
After all the skin was up, I tied a string to where I thought was center at the bottom of the fence. I stretched the string to the top of the fence and tied a crayon to it (just didn't have a pencil) The string acts like a giant compass, and let me make a nice even arc.
Finally, I took a hand held jig saw and sawed along the line at the top making that nice curve.
Only took me a day to knock it out.
I feel better about the 1/2" rod if it goes all the way through, but 1/2" doesn't sound particularly rigid.
What I would do is make the 1" tubing (below the 1/2" rod) flush with the bottom board, so that the 1" tubing can't flex under load. I don't like any give, flex of sway. Notice how it's harder to do a handstand on carpet or any surface with give, versus a hard floor?
I've been thinking about making something like this but I want it to break down for easier transport. I was thinking about something close to what you have but with the down tube (1/2" rod in your build) sleeved at the base inside a slightly larger tube and secured with a pin, like this: https://www.amazon.com/Curt-Manufacturing-25080-CURT-Safety/dp/B001GN3H5A But the fit needs to be tight, so I might need set screws. Something that looks like this at the base. https://www.amazon.com/Stainless-Square-Component-Terminal-Railing/dp/B00VS60MYO/
I'd probable use a thin-wall 1" box tubing for the whole thing, screwed into a 2' x 3' x 3/4" plywood. Under the hand supports (at top) I'd weld a metal plate slightly smaller than the wood hand grips with shallow screws up from the bottom. Id' make the metal base one piece, versus two.
Long story short (sorry, not really), if $2/baluster is within your budget, then black-coated round ALUMINUM 26-inchers are there for the taking. I'm estimating that you'll need 170 for your fifty feet, give or take. Steel versions may also be available for less money - or more money, depending - but those are typically not ideally suited for exterior use...
https://www.amazon.com/Deckorators-Aluminum-26-Balusters-DB52613/dp/B01BUAXYP6
Home Depot, Lowe's & Menard's should have similar buys. Take a close look at the reviewer images and you'll see that some utilized decorative mounts and some didn't. They're NOT required...
Now, with a Tee at the top, the vertical member does the lion's share of the work. If someone sits on the section, it's literally the joist that carries the load. With the handrail that runs flat across the top length of that "joist,", the railing becomes more dimensionally stable, with the horizontal and vertical members keeping each other in check. And everything below is basically there for aesthetics...
Essentially, the "joist" of the Tee is bored to accept a baluster at 1-inch depth, the bottom post-to-post runner is bored to accept a baluster at 1/2in depth. All in alignment, of course. The runner is mounted at a distance 1-inch shy of the baluster length from the bottom of the Tee. Then each baluster is pushed up into the "joist" and dropped into place in the runner. Carefully add a little construction adhesive into those runner bores before dropping each baluster into place and those components will NOT come apart without some effort!
If using brackets to hang each section from post-to-post, and if using construction adhesive to bond the handrail to the "joist," then the visible use of fasteners can be practically reduced to almost nothing...
Hope this helps, again!
Edit #1: From that Amazon link, the third reviewer's sectional construction is basically what I was trying to describe assembled...
Edit #2: If using brackets, then everything can be easily dropped into place with the balusters sandwiched into position. Therefore, the "joist" bore can be 1/2-inch deep, just like the runner bore, and construction adhesive won't be needed at all...
Copied from the album:
>Fantastic little light package. The reason I particularly like this kit is because the the flashlight houses its own charging circuit, so you just plug Micro USB in and you can charge it on the fly (off a phone charger), no need for something like a NiteCore charger.
>The overall size of this thing is tiny for how much light it puts out. It has three settings, with memory for the last one used when turned on, from 'blinding' to 'good enough' to 'decidedly dim, but bright enough to not trip over things'. I set it to the middle one. While it has a strobe mode, it's quite difficult to activate accidentally --requiring repeated rapid presses -- which is great for Nerf. I did have to pad the mount with a rubber band, as the flashlight is a smidge under the 1" diameter for the mount. That's fine, though, as it protects the finish of the flashlight from metal-on-metal contact. A polymer mount would be significantly lighter, and I might look to see if one is out there.
>The parts of this kit are as follows.:
>MagPul 5-slot MOE rail
>Off-set 1" Flashlight Picatinny Mount
>JetBeam EC-R16
I've looked into this quite a bit and the best way I found (which may be overkill) is to get the following:
The turnbuckles would really only be needed if you don't believe you could get the steel cable tight enough, but if you have a short span it shouldn't be an issue. If you plan to run the steel cable through each eye hook and only have the terminals at the ends, then the turnbuckle may be needed.
EDIT:
They also make much cleaner looking solutions where the terminals have a built-in turnbuckle like THIS and terminals that have a lag bolt already attached which would remove the need for eye hooks like THIS
Yes. Use the Magpul MOE rails. They're pretty cheap on amazon.
https://smile.amazon.com/Magpul-MAG406-BLK-Polymer-Section-5-Slot/dp/B003F6EMQO/ref=sr_1_1?ie=UTF8&qid=1492103222&sr=8-1&keywords=magpul+moe+rail
Make sure you know if your handguard is mlok or moe.
Do you mean patio? :P
Easy enough. Get one of these then do the hammer drill thing. For bolts in to the concrete either use the wedge anchor or set some bolts in with epoxy. Probably wise to use stainless steel for all your bolts.
I have a Mossberg 590A1 (18" barrel / bead sight) with...
Loaded with Federal Tactical Law Enforcement 8-pellet 00 buckshot. I'm very happy with it.
Don't forget to practice frequently with whatever you end up choosing.
Nope, get the pax caps...
Prescott Plastics 10 Pack: 3/4 Inch Round Black Vinyl End Cap, Cover Rubber Flexible Tube Pipe Marine Safety Tip 0.75" https://www.amazon.com/dp/B07QVZ11PG/ref=cm_sw_r_sms_apa_i_PEKVDbQWN1QR4
Love my AR-9 pistol. Mine gun costed around $800.00. Palmetto State Armory makes fantastic products at a reasonable price to not have to question build quality. If you ever want to build yourself a pistol so the wife and you both AR-9s I recommend the below:
http://i.imgur.com/D4onaM8.jpg
http://palmettostatearmory.com/psa-9mm-7-5-pistol-length-6-lightweight-m-lok-upper-with-hybrid-bcg-and-ch.html
http://palmettostatearmory.com/review/product/list/id/23736
https://www.amazon.com/Tactical-Rifles-Shotguns-Ozark-Armament/dp/B010OMQSR2
https://www.amazon.com/Ozark-Armament-Picatinny-Flat-top-Co-Witness/dp/B01AISP1KW
https://www.midwayusa.com/product/1006228190/glock-magazine-gen-4-glock-17-19-26-34-9mm-luger-33-round-polymer-black
https://www.kakindustry.com/shockwave-black
3/21/2017 ATF Letter (PDF) on allowing shouldering: https://www.sigsauer.com/wp-content/uploads/2017/04/atf-letter-march-21-2017.pdf
https://www.amazon.com/Magpul-MAG406-BLK-Polymer-Section-5-Slot/dp/B003F6EMQO/ref=pd_lpo_vtph_200_lp_tr_t_3?_encoding=UTF8&psc=1&refRID=3Z3PEQ2R635682GQ1XKM
https://www.midwayusa.com/product/2319453274/magpul-afg2-angled-forend-grip-ar-15-polymer
Dig a hole 2 feet deep (minimum), pour a footer using an 8" tube form, and use a post base. You can set the base and put the anchors into the concrete while it's still wet to avoid having to drill (just make sure you get it plumb using a torpedoes level). It'll run you all of fifty bucks. The EZ base is the most expensive part.
Something like this?
http://www.amazon.com/Universal-Forest-Products-3-1-Post/dp/B0045LVHRA/ref=pd_sim_sbs_hi_14?ie=UTF8&refRID=0ENRF1V6W6F125PX1WVX
+
http://www.amazon.com/Woodway-Products-870-3212-3-Inch-Cedar/dp/B002BDTHNA/ref=sr_1_95?ie=UTF8&qid=1406508341&sr=8-95&keywords=fence+post+caps
4x4 Post Support table Leg Bracket w/screws (actual Size 3.5"x3.5") POST NOT INCLUDED! https://www.amazon.com/dp/B06W53CML2?ref=yo_pop_ma_swf
Cable Railing Kit Deck Railing 20... https://www.amazon.com/dp/B07FM3DV8P?ref=ppx_pop_mob_ap_share
I was pleased w the quality for the price.
Id buy stuff from you. Ive been watching Niki from untie the lines and she measured her own and had someone swage them. she measured wrong and had to cut them down (ouch). My rig comes down tomorrow and I am going to inspect it. Ive learned a few things from Youtube LOL.
In fact. I need some lifelines. I had a swage fall off one and I got it lashed right now with some paracord. The boat comes out 8am tommorrow and wont go back in until april it is on my project list.
I was going to buy this
https://www.amazon.com/Threaded-Package-Stainless-Marine-Packages/dp/B00IX42OAO/ref=pd_rhf_gw_p_img_6?_encoding=UTF8&psc=1&refRID=7DV1WPHY4SN6FRCXEA8B
and smash it on with this
https://www.amazon.com/gp/product/B00PCHK4JS/ref=pd_sim_60_6?ie=UTF8&psc=1&refRID=Q25GD64S095G2F2T2Z08
Im not convinced my lifelines are that important.. AND I think they are below my knees so chances are I am going to go over it anyhow.. ANd break them in the process. I have all kinds of handholds when I go to the foredeck.
anyhow.. love to get your thoughts. because I know you wont BS me. (We have spoken a few times here)
Fill the buckets and then install brackets on top.
brackets on Amazon
I agree. It is a DIN Rail Terminal Block. In a lot of industrial electrical systems, different things can be interchangeably mounted to a section of DIN Rail.
I believe both the magpul AFG and VFG can mount to that handguard WITHOUT using rails... one of the perks. I know the VFG can for sure. I mount a flashlight on my handguard (I have the same one) and I use the tiny rail section and mount it on the side. Here is the rail I got: http://www.amazon.com/Magpul-MOE-Rail-Section-Black/dp/B003F6EMQO/ref=sr_1_1?ie=UTF8&qid=1421023661&sr=8-1&keywords=moe+rail
Kinda like this, assuming the hole spacing is correct...
Magpul MAG406-BLK MOE Polymer Rail Section, 5-Slot, Black https://www.amazon.com/dp/B003F6EMQO/ref=cm_sw_r_cp_api_i_y0h0Db146TSVR
Yep, toss one of these on the side for the light, one in the bottom for the grip/bipod. https://www.amazon.com/dp/B003F6EMQO/ref=cm_sw_r_cp_api_6yjtybJNE8QMW
Magpul 5 slot MOE rail section
Quick 3 minute install. costs about $6
https://imgur.com/a/4WI8ply
Would this http://amzn.com/B003F6EMQO work?
Where can I find a rail with those dimensions?
https://www.amazon.com/gp/product/B07FSY46WL/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
i was looking at this one... https://www.amazon.com/WELTEK-Threaded-Terminal-Stainless-Aircraft/dp/B07FBMN6JW?source=ps-sl-shoppingads-lpcontext&psc=1
https://www.amazon.com/Stainless-Steel-Aircraft-Bicycle-Cutter/dp/B078HTTPL2
just look for wire rope cutters, electrical supply houses usually have them.
Maybe some sort of cap that goes over the contact area? This is what I found quickly.
https://www.amazon.com/dp/B01M4QXUK3/ref=cm_sw_r_cp_api_i_-4A1Cb661YDE3
$162.95.
I paid $190
Mini Cooper 82-71-2-148-014 RAILING CARRIER
The easy fix that would also prevent future damage is to cover the post with a vinyl sleeve. Assuming it's a standard 4x4 they will likely have the sleeves at a big box store near you or could order it online https://www.amazon.com/YardSmart-61109088-4X4X45-Traditional-Railing/dp/B00FQ5B7CY/ref=sr_1_2?gclid=CjwKCAjw1_PqBRBIEiwA71rmtYhqmzxttTpM5QR1_OrwJSbsYuYLZzX-hQtRvYfWefOwNNmYDeb7kBoCMA4QAvD_BwE&hvadid=232520972360&hvdev=c&hvlocphy=9013523&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=12540101217079603863&hvtargid=aud-649564993678%3Akwd-342793125484&hydadcr=8433_9618934&keywords=fence+post+covers&qid=1566398743&s=gateway&sr=8-2