Reddit mentions: The best lawn mower parts & accessories
We found 116 Reddit comments discussing the best lawn mower parts & accessories. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 95 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. 6” Hydroponic Carbon Air Filter 470 CFM Air Scrubber Oder Control, Gyo2301
- Activated virgin carbon removes 99.7% of volatiles from the air
- CFM: 470, 6-Inch Flange
- Pre-filter removes dust and airborne particles
- Average Life Expectancy:1.5 years
- Can be used to clean incoming or outgoing air
Features:
Specs:
Weight | 14 Pounds |
2. Tommyco Kneepads
- Made With dual density closed cell polyethylene foam
- Hard density surface to withstand rough surfaces
- Soft density inner padding for added comfort
- Packaged in attractive colors
Features:
Specs:
Color | Colors may vary |
Height | 2 Inches |
Length | 17 Inches |
Weight | 2 Pounds |
Width | 8 Inches |
Size | One size fit all |
Number of items | 1 |
4. VEVOR Wind Turbine 400Watt Wind Turbine Generator DC 12V Wind Turbine Generator 3/5 Blades with Controller (400Watt)
Wind turbine rated power: 400W.Rated Voltage: DC27-54V;Battery Voltage:DC12V;Material of Wind Leaf: PBT;Start-up Wind Speed: 2.5m/s(8'/s);Rated Wind Speed: 12m/S(35'/s);Rated Speed: 800r/min[RPM]Low start-up speed, high wind power utilization, lightweight, low vibration with 3/5 bladesWorking Temper...
5. Oregon 92-616 G3 Gator Blades (Set of 3)
- Set of 3 Gator Blades for John Deere
- Replaces: AM137757, AM137758, AM141035, AM141036, GX21784, GX21785, GX21786, GY20852
- 17-1/16" Long, 2.5" Wide, .187" Thick, Mounting hole is a 7 point star hole
- The Gator MulcherTM blades unique design has revolutionized the way blades mulch grass clippings. The angle of the Gator teeth redirects the air flow to keep the clipping directly in front of the cutting edge. The longer the clippings remain in front of the cutting edge, the finer the size of the clipping. The result - Less Bagging! Less Raking! Quicker Decomposition. Also From the Manufacturer: The Benefits of Using the Gator MulcherTM Blade 1. No bagging! 2. Save time by eliminating the need to bag! 3. Save money by not paying for recycling! 4. Save the environment by not using the landfill for grass clipping! 5. Save even more time! Mulch and mow at the same speed as mowing! 6. Grass clipping are cut smaller. Clippings fall though the grass and add nutrients to the lawn! 7. Gator MulcherTM blades last longer in sandy soil conditions! 8. Leaves are reduced to a fine mulch - virtually eliminating the need to bag!
- Hardened steel for extended blade life. All Oregon blades are austemper heat treated
Features:
Specs:
Color | Black |
Height | 4 Inches |
Length | 18 Inches |
Width | 2.7 Inches |
Size | (Set of 3) |
Number of items | 3 |
7. Farm & Ranch MH2121D Heavy-Duty Steel Utility Cart with Removable Folding Sides and 13-Inch Pneumatic Tires, 1,000-Pound Capacity, 48-Inches by 24-Inches, Green Finish
- 1000-pound capacity
- Made of steel with a 48-inch by 24-inch steel mesh bed and green powder coated frame finish
- Padded straight handle for pulling comfort and 13-inch pneumatic turf tires to tackle any terrain
- Utility cart has folding removable sides and makes moving heavy supplies in the yard seem effortless
- Comes with a 1-year limited warranty
- Utility cart has folding removable sides and makes moving heavy supplies in the yard seem effortless
- Made of steel with a 48-inch by 24-inch steel mesh bed and green powder coated frame finish
- Padded straight handle for pulling comfort and 13-inch pneumatic turf tires to tackle any terrain
- 1,000-pound hauling capacity, height of 26-inches and weighs 58-pounds
- Comes with a 1-year limited warranty
Features:
Specs:
Color | Black |
Height | 26.25 Inches |
Length | 53 Inches |
Weight | 64.6 Pounds |
Width | 24 Inches |
Number of items | 1 |
8. ATVATP 4X 494768 Shut Off Valve for 1/4" Fuel Line for 698183 Cut Off Valve 697947 493960 5091 5091H 5091K & 493629 691035 Fuel Filter
- Fit for 494768 698183 697947 493960 698181 5091 5091H 5091K
- Fit AM107340 AM36141
- Fit 1/4"" Fuel Line
- Fuel Filter fit for 493629 691035 5065 5065D 5065K
- You will get: 4x shut off valve, 4x fuel filter, 2 feet fuel line, 8x clips
Features:
9. Robot Mower Husqvarna Automower 450X + Installation Kit by Husqvarna
- The world's first scented intimate massager designed to stimulate all the senses, blending incredible power and elegantly seductive beauty in this petite vibrator
- A silky, soft-touch matte finish that is as beautiful against the skin as it is to look at
- 8 ultra-powerful vibration settings with adjustable strength allow you to find the perfect sensation
- Fully USB-rechargeable and 100% waterproof to a depth of one meter for use in the bath and easy cleaning
- 1 year warranty and 10 year quality guarantee
Features:
10. EasyShade 6“ X 6” X 2pcs Stainless Steel T316l Wire 20 Mesh Variety of Sizes
Shipping from California.Mesh/inch: 20Wire Dia. inches: 0.0075 Opening. Inches: 0.043% Open: 71; Weight/Sq Yd: 10 ozSize: All sizes were cut from brand new rolls. Custom sizes are available per request.
11. Weber # 70360 Locking Caster
- Genuine Weber OEM part # 70360 Locking Caster and Insert.
- Includes: 1 Locking Caster, 1 Caster Insert, and Instruction Sheets.
- Caster features the wheel locking mechanism. This caster wheel helps you keep your unit mobile for easy transportation and locking mechanism will keep it steady in place while in operation.
- Caster diameter: 2-7/8". Caster Stem length: 1-1/4".
- Fits: Spirit series (2009-2012), Genesis series (2007-2011), and Summit series gas grills (2007-2011).
Features:
12. Special Products (Speeco) S010541GT Hd Ratchet Jack Hitch Accessories for Tractors, 28-Inch
- HD Ratchet Jack 28"
- Heavy Duty Ratchet Jack with 1-1/4" ACME Threads
- Adjustable from 20" closed to 28" open
Features:
Specs:
Height | 8 Inches |
Length | 2 Inches |
Width | 22 Inches |
Number of items | 1 |
13. Tecumseh 630953 Lawn & Garden Equipment Engine Carburetor Pump Element Genuine Original Equipment Manufacturer (OEM) Part
Sold on Amazon
Specs:
Weight | 5 Pounds |
Number of items | 1 |
14. Summit Flat Proof 12 X 16.5 Skid Steer Tires W/Rims Cat Deere Bobcat Gehl Solid
- 12x16.5
Features:
Specs:
Number of items | 1 |
15. Brinly PA-40BH Tow Behind Plug Aerator, 40-Inch
- Aerate & Relieve Compacted Soil: 24 heat-treated, 16-gauge Steel plugging spoons penetrate compacted soil and remove up to 3-inch plugs of soil, allowing water, seed, and fertilizer to reach the roots. Brinly plug design is narrower with sharpened ends to allow easier penetration and require less weight.
- Long-lasting construction: durable, all steel design with Fully-Enclosed Weight tray holds up to 150 pounds of any type of extra weight for maximum soil penetration and depth. Tines are heat-treated for strength. No flat wheels for durability.
- Easy transport: for crossing drives, walks and rooted areas, Brinly plug aerator includes a single transport lever to engage transport mode using the 10" Never flat rubber tread tires.
- Works safely on turns & uneven terrain: three independently rotating, Welded Tine sections minimize turf damage during turns and help provide consistent penetration on uneven ground
- Universal Hitch: a single pin, universal Hitch easily attaches to every lawn tractor and most ztrs and ATVs.
Features:
Specs:
Color | Black |
Height | 28 Inches |
Length | 37 Inches |
Weight | 66 Pounds |
Width | 51 Inches |
16. 10 in. Haul-Master Pneumatic Tire on White Wheel - 4.10/3.50-4 KNOBBY TREAD
- National Standard Inc.
Features:
Specs:
Size | 10 inches |
17. Oregon 42-095 [57] Small Engine Deck Leveling Gauge
- Oregon Replacement Deck Leveling Gauge
- Oregon Genuine Replacement Part
- No Assembly Required
Features:
Specs:
Color | As the picture shown |
Height | 2 Inches |
Length | 2 Inches |
Weight | 0.12 Pounds |
Width | 2 Inches |
Size | 1 pc |
Number of items | 1 |
18. John Deere Original Equipment Depth Gauge #AM130907
- Genuine John Deere OEM Part Number: AM130907
- For use in accurately leveing and measuring mower decks on rdiing mowers, lawn and garden tractors, and front mowers for better groomed lawns.
Features:
Specs:
Height | 4.7 Inches |
Length | 16 Inches |
Weight | 1 Pounds |
Width | 8.25 Inches |
Number of items | 1 |
20. Briggs & Stratton 5431K Oil Extractor Pump, 4-Liter
Briggs & Stratton 5431KGenuine Briggs & Stratton Oil Extractor Pump 4LNew OEM PartMade in China
Specs:
Color | Original Version |
Height | 8 Inches |
Length | 1 Inches |
Weight | 2.02 Pounds |
Width | 7 Inches |
Number of items | 1 |
🎓 Reddit experts on lawn mower parts & accessories
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where lawn mower parts & accessories are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Blades: http://www.amazon.com/dp/B007PQ2AXW/ref=pe_385040_30332190_TE_tr_3p_M3T1_ST1_dp_1
If you can stock these, and price point it within $5, I'm in.
> Do you think surveys, and similar forms of communication, are good or bad?
I think it's terribly impersonal and unsuccessful. You're essentially throwing a form at an existing or potential customer saying, "here, fill this out". Instead, I'd be much more impressed with doing the things that you're doing. Getting out and talking to people. I know labor is expensive, but why not leverage the knowledge and passions of your younger workforce, 1 hr every couple days, to scan the social networks and interact with the community to help them solve their problems using your products?
Now, I've never been, nor will I ever be, on Facebook, or any of the other major social networks. However, I will say this. You guys need to find a way to inject yourselves into the conversations. If you can somehow detect that someone from the QCA posted a message like, "I need to put down fertilizer this weekend.", that would be a perfect opportunity for you to directly reach out to that customer and say, "hey, K&K here, we have a ton of that stuff at a great price, and while you're at it, don't forget about grub treatment. also, stop by and speak with (insert name), and they'll give you a great deal on aerator rental". See where I'm headed here? Hold a discussion with them, just like you would out on the street. Traditional advertisements simply don't work any longer.
Look over the posts in /r/quadcities over the last couple months. You'll see people who need help finding things, from apartments, to restaurants, to activities, to health care, banks, bicycles, etc. They're all reaching out for personal interaction and recommendation.
So there's something for you to figure out. Maybe there's someone over at /r/advertising or /r/marketing that has done something similar.
This is a good start, and should keep you busy for a while. The main things I would add are long tweezers:
http://www.amazon.com/Bonsai-Tweezer-and-Blade-Tool/dp/B000O560FK/ref=sr_1_1?ie=UTF8&qid=1368835403&sr=8-1&keywords=bonsai+tweezers
I use mine all the time. The other thing you'll need is cut paste. These are the two kinds I use:
http://www.amazon.com/Joshua-Roth-6044-Bonsai-Paste/dp/B000X36W7O/ref=sr_1_3?s=hi&ie=UTF8&qid=1368835488&sr=1-3&keywords=bonsai+cut+paste
http://www.amazon.com/Joebonsai-Bonsai-Pruning-Compound-Kiyonal/dp/B000NJFLHA/ref=sr_1_1?s=hi&ie=UTF8&qid=1368835488&sr=1-1&keywords=bonsai+cut+paste
I use both kinds regularly, and wouldn't start a project without having both handy.
These and what you've already listed makes up most of my kit. FYI - 3.0mm wire and 3.5mm wire can be pretty useful too. If you're on a limited budget, maybe swap out the 1.0mm for 3.0 and call it a day.
A root hook is useful too, but if you're getting a tree that's already potted, you can get away without one for awhile.
Here's a free item to add to your kit - a long wooden chopstick. Super-useful for potting, helps tamp down soil into hard to reach places.
Also, if you're not planning on doing major pruning, you can easily get by with just concave cutters and some nice shears. Knob cutters are amazing, but unless you're cutting back major branches, they can be an expensive "nice shiny tool" in your toolbox.
A note on tools. You absolutely get what you pay for. I've had a set of imported japanese tools for close to 20 years that was pretty expensive at the time, but they still work almost like new. Cheaper tools generally won't last nearly that long.
EDIT: Oh yeah, you'll need a wire cutter.
Sounds like you're caught in the classic divide between car camping and backpacking. Mostly depends on the type of terrain you're hauling over. If its a rocky trail with elevation changes I'd say you're out of luck. But people do haul things like deer or large packs into or out of the back country. Mostly they use atv's but real mountain men who do it by hand basically use glorified travois with wheels. Here's a few options. (note: none are cheap)
Farm and Ranch Cart with folding sides
Carrix backpack Trolley
Packwheel back country hauler
If i were in your shoes I'd sort through the totes and turn it into a backpacking trip or just cut my loses. With a family of 6 it sounds like you have 5 little pack mules. A mile may not seem like much but when you're hauling gear it stops being fun pretty quickly.
I found this out the hard way carrying a sizable air mattress a few miles into the woods. the extra 6 pounds and setup were not worth the type of sleep we had.
A mile hike with a log of gear means you're going to have compromise between enjoying the camping or enjoying the hike out there. One of those is not going to be fun.
I HAVE THE SAME BIKE!
Mine is a GS450TX
TL;DR = fix bike fairly quickly and just ride :)
I hope this helps.
(INCOMING WALL OF TEXT!)
2 years ago I cut my mufflers off and mounted Emgo Shorty's. I also replaced my air box with Uni foam pods. I re-jetted the pilot from 17.5 to 20. I moved the main jet up from 115 to 122.5. I briefly cleaned the carbs with the spray parts cleaner, set the air mixture screws to 3 turns, and reassembled the bike. It ran like crap because I took so many shortcuts. I spent a couple weeks riding and fighting with the bike then I parked it for winter. 2 years went by and I didn't even want to deal with the crappy state my bike was in so I left it parked until we moved (better school zone for kids).
Once we got settled I brought my bike home and started tearing it down.
I spent a couple weeks doing the following:
Bench-sync slide/butterfly valves PDF Guide = http://members.dslextreme.com/users/cbsaunders/gs/gs450_carb_cleaning_guide.pdf
Parts = https://www.partzilla.com/catalog/suzuki/motorcycle/1982/gs450t/carburetor
Rebuild = https://youtu.be/w16in05ANN4
Soak = https://youtu.be/zDkOgnPidPs
Bench-sync = https://youtu.be/AS77T2CUsjI
http://www.jetsrus.com/a_jet_kit_street/suzuki_450_GS450S.html
Test boots for leaks = https://youtu.be/XzjSEYB9RDU
*Modified Uni foam pods: 1) removed half of the inside lip with an knife so the air intake circuit wouldn't be partially obstructed 2) Temporarily restricted Uni pods by taping a ziplock bag around the sides and cutting the bag away from the back end so air intake would be smooth.
Clean tank = https://youtu.be/UpaGo_nq5Rk
https://www.amazon.com/dp/B001KWGA10?ref=ppx_pop_mob_ap_share
https://www.amazon.com/dp/B0041CDW7G/ref=cm_sw_r_cp_apa_i_Pye1CbGHFE87B (buy locally at O'Reilly's cheaper)
(I found a great deal on Kenda Dual Sport K761's at http:/denniskirk.com Front = 100/90-19. Rear = 120/90-17.
Tools needed = Spoons with 2 Rim Protectors https://www.amazon.com/dp/B079JZN5BC/ref=cm_sw_r_cp_apa_i_QEe1CbCMX9JBM
Balance tires easy = E-Z Tire Beads Motorcycle Kit, Ceramic Balancing 2 oz Front + 2 oz Rear. https://www.amazon.com/dp/B00VOAOSDA/ref=cm_sw_r_cp_apa_i_hDe1Cb8QTNKYF
Other notable links:
The GS Resources = https://www.thegsresources.com/
GS Forum = http://www.thegsresources.com/_forum/index.php
Bike Cliff's site = http://members.dslextreme.com/users/bikecliff/
Parts = https://www.babbittsonline.com/oemparts/l/suz/50d3f2caf8700230d8b4bf8c/1982-gs450tx-parts
*** After all this maintenance, my bike starts easily, sounds incredible, shifts wonderfully, is very reliable, and a hell-of-a-lot of fun!
~Best of luck friend~
Go to DoMyOwn.com and get a good preemergent. Preemergent stops new seeds from growing for the prescribed period. Most of these weeds will die each year after producing seed. A common preemergent in the US is Prodiamine. Liquid is more cost effective, but granular is easier to apply on large areas with a spreader.
If you let the weeds die at the end of the year, and apply the pre emergent especially during late winter or spring when the seeds germinate, you can cut down on the vast majority of the weeds. It will take a few years to get to a lush green grass. Even professionals won't be able to get you to a weed-free state in one year. You have to reduce the bank of weed seeds ready to germinate in the soil. And that takes time.
Any time you see the weeds reaching into the sky with their little flowers, you need to mow that down before they go to seed, or you will be starting over with a fresh seed bank. Keep the broad spectrum herbicide going too prevent them from going to seed.
For a yard that large, I would go as far as to recommend a husqvarna robot lawnmower. It is expensive up front, but for years of not having to mow the grass, and always having a perfect cut, it is worth the investment. I have it running in my yard and I am very pleased. If you buy it directly from Husqvarna, they have options to do the installation of the wire for free, which can save you a ton of heartache.
https://www.amazon.com/gp/aw/d/B00GPEKSK2/ref=yo_ii_img?ie=UTF8&psc=1
That's were I got the mesh from. As for the tank itself, I actually got it from one of my customers whose tanks I take care of as a sir Issac Newton day gift lol. She's quite the character. The light I already linked you. I'm using ADA aqua soil as a substrate. I found some seiryu stones on ebay for cheap, but that all scaping stuff. You'll come up with your own scape. The original link I sent you has all the information on how to mod the spec V for shrimp. Let me know if I can help you in any other way. Good luck and sorry about your shrimps =(
These are the shelves I bought: http://www.amazon.com/gp/product/B001A0ZFRW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
The wheels are plastic and snap together. If you can find a shelving system with wheels that are really wheels, like hard rubber library car wheels or heavy duty casters that mechanics use to move their toolboxes, then I would think they would be just fine. Also, the wheels aren't screwed in, they just slide into holes in the bottom of each leg. They have a lot of positive reviews at amazon, but I wouldn't buy them again.
These http://www.amazon.com/Weber-70360-Locking-Caster/dp/B00JSVRNOI/ref=sr_1_54?s=home-garden&ie=UTF8&qid=1425341758&sr=1-54&keywords=casters
are very similar to the casters that came with the shelves.
I would suggest something more like these that I have been considering replacing the old wheels with:
http://www.amazon.com/Wagner-Caster-Swivel-Bearing-Capacity/dp/B003E7ECMI/ref=sr_1_9?s=industrial&ie=UTF8&qid=1425341997&sr=1-9&keywords=casters
Or just go to your local home improvement or hardware store and explain what you want and why you want it. Sometimes they can be helpful
OK so the spring/coil unit wouldn't need to be hinged. It could be two legitimate pieces (his + hers), in the same way that a king bed can be made from two twin's today. They'd still both go within one fabric/foam wrapper. You'd clip them together before you zipped the whole thing up. The zipper's a neat in this case because you'd still put fitted sheets on the whole thing, and they'd be hidden even more.
Do the springs come from China in mattress shape, or it is pure spring metal packed for density. I'm trying to imagine those expensive containers docking in Portland/ San Francisco. So in most cases it's assembly in the US (or Canada). I had previously imagined you'd receive drums of wire, and make coils yourselves.
You joke about getting into the mattress business :) I'd previously been sketching designs for a standardized sofa and chair assembly 'model' also imagining soft coverings coming from the far east, and being assembled at home. In that case the sofa frames (say about three or four standard designs would be made from 2x4 (or similar) locally, but have a mechanism of tightening the frame within the fabric cover. That would allow no external zippers, but still a taught product that could be home assembled. Specifically the wooden frame could be tightend whilst being assembled by virtue of a ratchet jack - http://www.amazon.com/dp/B001TPYX9O - Either that was built-in, or is in-situ long enough for some of the wooden bits to snap "home". again the soft coverings could be ordered from a catalogue and delivered by UPS in a box, the wooden frames would be made on a jig in a local factory, and delivered through regular furniture channels or direct from the factory. The arms would clip on much more simply, and probably be modular in themselves versus the base. They may or may not come complete with the soft coverings. You get the added benefit that the whole construction thing can be reversed to got larger items out of smaller apartments or high-rises.
I'm just a software guy though : You're my only contact in the furniture industry :-P
I think rover is the wrong term here.
Autonomous Mars tractor would be more accurate description of what I'm thinking of.
Only needs to do a few jobs really well, can be "over built" by space standards spending mass fraction instead of design time. And it only needs to last 2 years until a mechanic comes to replace it's consumables like seals and any fluids, burnt out computers, whatever.
Otherwise it's just a box with wheels with standard tractor attachments. No fancy body or seats at all. Shovel on the front and a drill on the back. Future missions could bring more attachments, trailers for it to tractor, ect.
A KISS farmers tool made space worthy, not a NASA rover made farm worthy, minimum number of moving parts necessary. Possibly even remove the suspension entirely and make it a skid loader. Very few things are more simple to design and build than an electric skid loader.
https://en.wikipedia.org/wiki/Skid-steer_loader
Two foot think solid rubber tires are going to take a LONG time to degrade even on Mars. BFS means you can bring those stupid heavy tires. They are worth the effort since you can use them for years if not decades.
https://www.amazon.com/Summit-Proof-steer-Tires-Bobcat/dp/B00DU4VFVG
Though might want to work with NASA's rubber experts to make sure out-gassing isn't a problem or some other edge case issues. Point still stands if you aren't trying to cut corners on mass you can KISS your way out of most the problems that have plagued rovers in the past.
After a bit of googling I found the part I need! It's a pump element (not sure what that means to be honest but that's okay). Thanks for the help
I don’t have that one, but I bought this one last year (same price), and it worked great. Excited to use it again in a few weeks!
Brinly PA-40BH Tow Behind Plug Aerator, 40-Inch https://www.amazon.com/dp/B0026T4716/
I'd invest in an inline carbon filter. They're typically used for indoor marijuana growing to disguise the very strong odor it produces.
Something like this.
I'd set one of those up near the window or where-ever the smoke enters at. You'll want a pre-filter to catch dust/big particles to make the carbon filter last longer and you can add a sponge at the end and buy various oils/scents and wet the sponge with it to help freshen the air as well.
I knew a guy who would grow 2 large hydroponic weed plants in a small room and you could not smell a thing because he used one of those carbon filters to vent it.
>The only true wisdom is in knowing you know nothing.
An item
Thanks for the contest!
Here's another third party version of the same thing for 15.60 that ships free with Prime.
I just copied and pasted the name in the search up top. There was even a four pack by the original seller for seven bucks more than the first listing.
With a tool like this: https://www.amazon.com/John-Deere-Original-Equipment-AM130907/dp/B006RIL8WS or this https://www.amazon.com/Oregon-42-095-Small-Engine-Leveling/dp/B00TM8WJM8/
Put the mower on a level surface, like a concrete floor, then measure to the bottom of the cutting surface of the blade (the bottom of the angled part). To get accurate measurements, check when the blade is forward/back, and side-to-side to make sure the deck is actually level. Make sure to remove the spark plug wire from the sparkplug when doing this, since turning the lawn mower blade could start the engine up.
Morthy:
Akeleie:
I don't know what Vista charges per hour for service work but you could probably buy a few parts and tools to do most of it yourself and save some money. You could likely get most of the oil out through the fill tube using a fluid extractor like this one for $30 on Amazon.
You'd still need to get the drain plug out though cause it'd be pretty shitty to sell the bike with a stripped bolt.
Those links are super high priced. Especially the second one. Notice the $124 one says 56 CFM....wow. Look into something more like this.
I just purchased this filter by itself for my own grow.
So... I think this might be the greatest product on Amazon.
Looks like they're higher wattage than they used to be. Might be time for us to upgrade.
Ours is pretty compact. This one might be larger.
https://www.amazon.com/VEVOR-Turbine-400Watt-Generator-Controller/dp/B0774HDGWN/
This. You hook a fan up to it and it pulls air through a dust filter then through the activated charcoal. Takes care of the smell completely.
I've had this on my Amazon wish list for over a year now:
https://www.amazon.com/dp/B00IISFL64/ref=cm_sw_r_other_awd_BWeFwbN8E0HX9
This 400W on Amazon is priced really well. I follow a skoolie on Instagram that has it and likes it.
I've considered getting one for rainy days but have other things to spend money on right now.
I actually found something like [this] (http://www.amazon.com/Tommyco-KP818-Purpose-Garden-Kneeler/dp/B001JEOH50/ref=sr_1_2?ie=UTF8&qid=1414378853&sr=8-2&keywords=gardening+knee+pad) at Walmart this summer and I've been using that. I have bad knees and it helps a lot. Blankets just don't cut it for me.
Someone on this subreddit recommended "gardener kneepads". I ended up getting a few of these. I keep them beside my yoga mat always.
https://www.amazon.com/Tommyco-Kneepads-Inc-KP819/dp/B001JEOH50
It looks like those might be unavailable, but I wanted to link to exactly what I ordered.
Here is the desktop version of your link
Briggs & Stratton 5431K Oil Extractor Pump, 4-Liter https://www.amazon.com/dp/B009POZ9YY/ref=cm_sw_r_cp_api_i_thhECbST4B23S