Reddit mentions: The best automotive doors
We found 23 Reddit comments discussing the best automotive doors. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 20 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. PROBASTO Jeep Wrangler Door Storage Hanger Bracket for All Jeep Wrangler CJ YJ TJ LJ JK JKU JL and New Gladiator, Pack of 2 Jeep Wrangler Accessories
- 【Standard projector screen】16:9 image aspect ratio, 100” screen size(87.17" x 49.02"), 160 viewing angle.
- 【Auto projector screen】Two ways to control (control panel and remote, battery not included), super quite and smooth motors, raise and lower the screen in 38 seconds in each direction. This is a perfect projector screen if you want install in a place and can be held when you want.
- 【Application】Compatible with all projectors (4K, DLP, CRT, LCD, HD, 3D), ideal for business, education application, gaming, party, wedding, birthday, camping, meeting, conference, gathering, proposal, live broadcast, lectures, exhibition or residential uses.
- 【High quality PVC material, High image quality】Anti-static, anti-acid fabric screen prevents from dust accumulation.Can be cleaned easily with soap and water. Work likes a HD TV on your wall !
- 【Black back design, enhance image contrast】 Fully black backed screen, eliminates light penetration and produces top quality color reproduction.
Features:
2. BMW Genuine Front Left Door Handle Lock Cylinder Repair Kit for 318i 318is 325e 325i 325ix
BMW Genuine Door Lock Repair KitFor cars with central locking.Please see Product Description below for vehicle compatibility.Manufacturer Warranty: 24000 miles or 2 yearsQuantity within package: 1
3. Dorman OE Solutions 924-928 Front Left Door Check
- Direct replacement - this door check is designed to match the fit and function of the original check on specified applications
- Restores functionality - this door check is made to fully restore part functionality after the original door check fails
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Features:
Specs:
Height | 1.97 Inches |
Length | 6.69 Inches |
Width | 3.58 Inches |
Release date | August 2016 |
Number of items | 1 |
4. Bestop 5166601 Black Full Steel Door Storage Jackets for 1976-2018 CJ7 & Wrangler JK 2DR & 4DR
- Heavy duty canvas jacket provides protection for pair of upper fabric half doors
- Heavy-duty zipper runs smoothly for easy closure or opening
- Tough fabric is weather-resistant for better protection
- Convenient handles let you install jacket on door while on the vehicle for easier removal
- Set includes two door jackets, one for driver side and passenger side doors
Features:
Specs:
Color | Black |
Height | 10 inches |
Length | 20 inches |
Weight | 7 Pounds |
Width | 10 inches |
Number of items | 1 |
5. Crown Automotive 8122874K3 Door Lock and Knob (81-86 Cj-5,7,8/84-90 Xj Cherokee/Mj Comanche/87-90 Yj Wrangler W/Full Steel Doors Cylinder Kit)
- Fit type: Vehicle Specific
- Direct Replacement
- Top quality products
- Manufactured in Taiwan
Features:
Specs:
Height | 1.5 Inches |
Length | 7.5 Inches |
Weight | 0.5 Pounds |
Width | 2 Inches |
Number of items | 1 |
6. Genuine Ford F4TZ-15219A64-A Door Latch
- Package Dimensions: 55.88 cms (L) x 16.51 cms (W) x 55.88 cms (H)
- Product Type: Auto Part
- Package Quantity: 1
- Country Of Origin: China
Features:
Specs:
Height | 14 Inches |
Length | 37 Inches |
Weight | 2 Pounds |
Width | 9 Inches |
Number of items | 1 |
7. Just Miata JMWGB01 - Window Guide Bushing (Set of 2)
The Window Rear Guide Bushing also stabilizes the rear portion of the window and keeps the window from rattling around at the rear.Comes in Set of 2. One bushing is needed per window or per side of car.This Replacement Window Guide Bushing is made out of Delrin, a self-lubricating plastic that shoul...
8. EAG Matrix Tubular Door Set with Side View Mirror Pair Fit for 2018-2020 Wrangler JL 4 Door Only
FITMENT - Fit for 2018-2020 Wrangler JL 4 Door and 2020 Gladiator JT.SIDE VIEW MIRRORS INCLUDED - Military grade side view mirrors can be manually adjustable, and give you an excellent view to the rear while looking suitably rough.CONSTRUCTION - Tubular door frame is made of durable 1/8" steel shee...
Specs:
Color | Black |
Height | 12.6 Inches |
Length | 50 Inches |
Weight | 86.75 Pounds |
Width | 23.62 Inches |
Number of items | 1 |
9. Car Door Protection, Car Door Bumper, Car Door Defender, Removable Magnetic Car Door Protection (White, 1-Pack)
- Car Door Dent Protector, Protection Against Door Scratches
- Car Door Protection, Car Door Dents Protection, Door Ding Dent Protection
- Removable Magnetic Car Door Guard, Protection Against Door Dents
Features:
Specs:
Color | White |
Height | 0.2 Inches |
Length | 32 Inches |
Weight | 1 Pounds |
Width | 16 Inches |
Size | 1-Pack |
Number of items | 1 |
10. Black Rubber U Channel Edging Edge Trim Seal Corner Protection Protect Replace Part: X8R0106
FAULT: It is common on many vehicles for the rubber trim or edging strip to fail around the door openings, bonnet and boot. Often deteriorating over time; cracking or splitting leading to failure of the sealing function.THE SOLUTION: Fit our replacement trim and restore the seal and improve the look...
11. Sizver Chrome Door Sills For 2014-2017 MAZDA 3 -full protection/stylish look-
This package comes with everything in the picture.Comes with adhesive tape on the back for installation. Exactly Same as the PictureThis item is 100% brand new in original box. No cutting or drilling requiredMade by extreme durable and light weight ABS plastic with triple chrome coatedA brand new di...
12. Needa Parts 384222 Jeep Door Hinge Pin Kit
Meets or exceeds OEM standardsJeep Grand Cherokee 1998-94(1) pin .371 inch x 3.25 inch and (2) .374 inch (ID) x .504 inch (OD) x .285 inch (Height) bushings
Specs:
Height | 0.7 Inches |
Length | 4.1 Inches |
Weight | 0.02 Pounds |
Width | 1.5 Inches |
Release date | May 2014 |
13. Bestop 5180901 Element Doors for 1997-2006 Wrangler
- MIRROR NOT INCLUDED
- Heavy duty 1-1/4 inch tubular steel construction with powder-coat finish
- No-drill door-hinge mounting for easy installation or removal
- Paddle handle closure latches on existing factory door striker
- Restraining straps help prevent door from swinging forward onto vehicle's side
Features:
Specs:
Color | Black |
Height | 8 Inches |
Length | 47 Inches |
Width | 22 Inches |
Size | Doors - '97-06 TJ Satin Black |
14. Bestop 5179201 Element Door Enclosure Kits for 1980-1996 CJ7 & Wrangler
- Bolts to Element Door to cover entire tubular frame just like a factory lower steel half door
- Pre positioned holes for mounting HighRock 4x4 Mirrors
- Satin black powder coat finish can be painted to match vehicle color
- Storage bags cannot be used with Enclosure Panel installed
- Fits Element Doors P/N's: 51791, 51794, 51797, 51807, 51808 and 51809
Features:
Specs:
Color | Black |
Height | 7 Inches |
Length | 38 Inches |
Weight | 21 Pounds |
Width | 23 Inches |
Size | Panels 76-86 CJ7 / 87-95 YJ / 97-06 TJ Black |
15. Custom Accessories 16121 Black 8-Ball Style Door Lock Knob
Quick and simple installationSet of 2 knobsStylish look and designEnhances the look and feel of your vehicle
Specs:
Release date | September 2012 |
16. Dorman 38447 Front Door Hinge Pin and Bushing Kit for Select Jeep Models
Kit includes all necessary hardware for the repairDurable construction-hardened steel pin and brass bushingUse the kit to replace only the damaged pin and bushing-instead of the entire hinge assemblyTrouble-free installationEnsure fit – to make sure this part fits your exact vehicle, input your ma...
Specs:
Color | Black |
Height | 1.06 Inches |
Length | 5.5 Inches |
Weight | 0.28 Pounds |
Width | 1.75 Inches |
Number of items | 1 |
17. Bestop 5178537 Spice Upper Door Sliders for 1988-1995 Wrangler W/Square Upper Rear Corner
- Upper Door Sliders have premium fabric surrounds over rigid frame
- D.O.T approved tempered safety sliding glass window with latching closure
- Fit factory-original steel lower half door with no-drill installation more tools
- Double-bulb weather stripping for tight seal
- Fit factory soft top; Supertop NX P/N 54601 and Replace-a-Top P/N's 51120 and 51123 only
Features:
Specs:
Color | Spice |
Height | 0 Inches |
Length | 0 Inches |
Weight | 38 Pounds |
Width | 0 Inches |
Release date | October 2005 |
18. APDTY 035415 Door Check Stop Fits Front Left or Right (View Chart; Cadillac Escalade Chevrolet Avalanche Chevy Silverado Pickup Suburban Tahoe GMC Denali Sierra Yukon) (Replaces GM 15173407)
Meets Or Exceeds OEM SpecsFactory OEM Fit Form And Function
Specs:
Height | 4.25 Inches |
Length | 6.77 Inches |
Weight | 0.75 Pounds |
Width | 1.5 Inches |
19. RAZO JDM Clear 10 inch Car Bumper and Door Guard
Protects vehicle from dings and scratchesBends to fit the shape of the vehicle surfaceClear and unnoticeable. Made in Japan.Easy to apply.Sold as set of four. 10-1/4" L, 1/2" inch W
Specs:
Color | clear |
Size | 10" |
20. The Original, Arc Off Road, Window Channel, Door Hanger Bracket, 2 Door (2 hangers), Fits Jeep Wrangler CJ, YJ, TJ, JK, JKU JL JT And The All New Gladiator
THE ORIGINAL, Arc Off Road, Patent D857610 Door Hangers, Compatible with all model year Wranglers including the Gladiator. These are intended to hang a hard full door, will not work with half or soft doors. Hangers work on both front and rear doors, IF YOU HAVE A 4 DOOR YOU WILL NEED TWO SETS.Made i...
Specs:
Size | 2 Door |
Number of items | 2 |
🎓 Reddit experts on automotive doors
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive doors are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I've seen people get ratchet straps with extra large hooks and cut up a pool noodle and put it over the hook to prevent any sort of marking being left on the hard top. I don't know how reliable that is.
FWIW I'm going to use the method in OP's picture the next time I hang it. I feel like it will be much easier, faster, and more reliable. Instead of hooking between each eye bolt and a corner of the hard top with 4x ratchet straps I'm going to use two ratchet straps and run the hooks of each strap under the hard top with the rear window up and hook either end to the corresponding eye bolt. The straps will run front to back relative to the hard top and I'll likely have the ratchetting end towards the front of the jeep to make access easy.
The struggle with my method is the game of ratcheting the hard top up evenly.. I have to ratchet 3x on each ratchet strap then move to the next... round and round I go until the hard top is off the jeep and as high as it can go. The method is still very fast. I have a 2 door JK and solo the entire process of taking off the doors, freedom tops and hard top takes me about 28 minutes on average. If I have help this drops to about 18 minutes depending on the helper's understanding of what is happening.
I have hangers for my doors. I put a 2x4 up horizontally along my garage wall screwed into studs with 4 inch decking screws.. then I mounted these hangers to the 2x4: https://www.amazon.com/PROABSTO-Storage-Hanger-Wrangler-Bracket/dp/B07F9MCJ7K/
I also have 2x shreet rock carriers that I use - one for each door. I really only need one now but before I set up the hangars I used to rest the doors each on a carrier to prevent any damage to the body/finish from my concrete garage floor. The technique with the sheetrock carrier is to lift the door with the carrier from the front with one hand while grabbing the outer door handle with the other hand. I put some thin foam insulation for car audio (like dynamat) on the hook portion of the sheetrock hangar so the door doesn't slide in it. The sheetrock carriers I have are here, although you could go cheaper - it was the only option available to me at my local hardware store: https://www.amazon.com/Stanley-93-300-Visibility-Orange-Panel/dp/B00002X2EV
My freedom tops actually sit on top of the doors without retention although I'm going to thread some eye bolts into studs on either side of them and put a bungee cord as a safety retention. I've seen other people who use the same hard top storage method store the freedom tops on top of the hard top - I've never heard of an issue with them doing it that way. My first hard top suspension was an unwalled carport so wind was a factor and it would rock the hard top so I didn't want the chance of the freedom tops sliding off the hard top.. the habit I gained from that has stuck even now that I have a fully closed garage.
So without actually seeing it, it's hard to give you some advice of what parts you need to fix your issue but this is similar to what I purchased to fix my door lock issue. E30 lock cylinder
Might I also suggest looking for parts on Real OEM one of the best tools for finding parts and part numbers with actual diagrams for BMW's. Hope this helps and good luck with your issue!
Dorman OE Solutions 924-928 Front Left Door Check
I noticed at some point our 2007 doing this. I haven't replaced the door check yet, but I have it in my Amazon wish list for when I get a free afternoon and it isn't 40 below zero.
I just went through this. What I did was bought these bestop bags for the doors: https://www.amazon.com/gp/product/B0002SA31G/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
They're very heavy duty and will prevent scratches etc to the doors. That way you can storage them easily inside.
For my hard top, I built myself a cart which was really easy. You can find the directions here: http://www.jk-forum.com/forums/jk-write-ups-39/diy-hardtop-cart-85305/ . All you really need is some plywood (which most stores will cut for you), some wheels, some screws and a drill/drill bits. I duct taped some of the rough parts and also put some cloth on it. In total, it probably costed me $50. If you're storing outside, you may want to consider purchasing the Surco Hard Top Carrier instead of making it as the wood probably won't do well outside. You can also purchase the bestop cover: https://www.amazon.com/Bestop-42807-09-Charcoal-Wrangler-Hardtop/dp/B000VLF8AK/ref=sr_1_2?ie=UTF8&qid=1467384165&sr=8-2&keywords=jk+hard+top+cart .
I leave my hard top panels in my freedom top bag right inside my hard top.
You need this. I had to do this on my Jeep. Not gonna lie, it sucks. You have to jam your hand in a tight space and install it completely by feel. I had found a diagram of the whole assembly on a jeep forum that helped a lot. I’ll see if I can dig up a link
Edit: here ya go. Hope that helps.
Genuine Ford F4TZ-15219A64-A Door Latch https://www.amazon.com/dp/B000O0IDZU/ref=cm_sw_r_cp_apa_i_d4gBDbZ7MGV06
Not cheap, you might be able to call a junk yard a used one. Otherwise it looks like there is a used option on Amazon.
This advice isn't super specific, but you should probably remove the door panel and have a look. Window tracks aren't easy to get to but various things happen to them - the wheels wear out or one of the tracks falls off or spot welds break. If you look you might spot what's wrong easily. Adjusting or fixing the broken piece is probably what it needs. You can also clean and lube the tracks. They go way down inside the door. Internet swears by the "Honda Shin-Etsu grease" for this though it's expensive and even some silicone lube in a spray can is better than nothing.
I'm not saying this is exactly what you need, but just to give an idea:
https://www.amazon.com/Just-Miata-JMWGB01-Window-Bushing/dp/B00ZGAOW4E
http://mazdaroadster.net/showthread.php?5485-DELRIN-Window-Roller-Guide-Kit-1990-2005-Miata-from-Rspeed-net
Bestop 51809-01 Satin Black HighRock 4X4 Element Door Set for 1997-2006 Wrangler TJ 2-Door and Unlimited https://www.amazon.com/dp/B001P24OF4/ref=cm_sw_r_cp_api_i_azp5AbBJNM634
And
Bestop 51792-01 Black HighRock 4X4 Element Door Enclosure Kit for 1980-2006 CJ-7 and Wrangler - Front https://www.amazon.com/dp/B001892WBW/ref=cm_sw_r_cp_api_i_Wzp5AbYGM3XJJ
And
Bestop 51261-01 HighRock Black Full Door Replacement Mirror https://www.amazon.com/dp/B001AWHZ28/ref=cm_sw_r_cp_api_i_Dzp5AbQW4HXB7
Also I Bed Lined the steel doors to match my fenders.
EAG Matrix Tubular Doors Set With... https://www.amazon.com/dp/B07GCD43YW?ref=ppx_pop_mob_ap_share
Get on with the mods!
For door locks, inside.
Custom Accessories 16121 Black 8-Ball Style Door Lock Knob https://www.amazon.com/dp/B0009MYHGM/ref=cm_sw_r_cp_apa_i_qedODbR1D46Q4
Hinge pin?
Maybe from a door, or windshield?
Car door lock covers?
https://www.amazon.com/Custom-Accessories-16121-Black-8-Ball/dp/B0009MYHGM
Sizver Chrome Door Sills For 2014-2017 MAZDA 3 -full protection/stylish look- https://www.amazon.com/dp/B01LY3VJR0/ref=cm_sw_r_cp_api_.B7GAbH328S1G
SSO provides the trim with the bumper and high clearance kit, it's stuff similar to this: https://www.amazon.com/dp/B0735D4WCD/ref=psdc_15709351_t4_B0721YWC5S
I mean they make products for this.
Removable
Permanant:
https://www.amazon.com/2004-2011-MAZDA-CHROME-SIDE-MOLDINGS/dp/B006XK91WO/ref=sr_1_17?s=automotive&ie=UTF8&qid=1521689331&sr=1-17&keywords=mazda+3+molding+side+door
I am going to say both. Looks like that hinge has it's pin threaded on one end. Not sure what this is attached to, but could be threaded to attach a door stop.
​
Edit: clicked the post, didn't realize I was in a Wrangler subreddit. Thought I was in /whatis thisthing. So could it possibly be this?
https://www.amazon.com/Dorman-38447-Door-Hinge-Bushing/dp/B000TYU14C
https://www.amazon.com/McGard-76060-Thread-4-Door-Wrangler/dp/B00C50NHJO
I usually run with the doors off but the way the weather has been lately (North Texas) I've been keeping them on. 20 degrees one day, 70 the next... the full window zipper doesn't work for shit when it's cold. A split slide just makes too much sense.
and they can keep the damn things... holy shitballs.
Yikes. Fair enough. Try these - it will restrict far the rear doors will open.
APDTY 035415 Door Check Stop Fits Front Left or Right (View Chart; Cadillac Escalade Chevrolet Avalanche Chevy Silverado Pickup Suburban Tahoe GMC Denali Sierra Yukon) (Replaces GM 15173407) https://www.amazon.com/dp/B00C8E90RU/ref=cm_sw_r_cp_api_i_UUa6Cb8SQYF7H
Still have them available and there's other options.. just.. .ugly at times.
http://www.amazon.com/CarMate-Clear-Bumper-Guard-Medium/dp/B002WQ1WRU
http://www.customautotrim.com/products/moldings/rivet_sample1_240sx.jpg
I bought some of these
door hangers
I’ve had to problem with scuffing but a few ideas would be get some carpet and wrap your studs with it or some pool noodles and cut a slit down one side and wrap the studs with that.