Reddit mentions: The best automotive grilles

I got them off Amazon, under 100 bucks and easy to install (kind of). They just plug into the running lights on back of the headlights. Here is the URL to the Amazon page I bought it from. They are pretty good quality too.

2018 F150 Raptor Style Light Kit (Does not fit Honeycomb style grill) https://www.amazon.com/dp/B079Y2RWQ3/ref=cm_sw_r_other_apa_i_2AgWDb14GYA45

Thanks for the tip! Did some searching and think it might be something like "grille mesh" in English. Definitely [something] mesh I think. Did you get something like this? https://www.amazon.ca/Lanlan-6x12mm-Grille-Aluminum-Rhombic/dp/B07B93TQSW

Yeah, I'm really happy with it! And this is the one I bought. It arrived like 4 days after ordering:

https://www.amazon.com/gp/product/B073BXJRD7/

Just on AMZ

https://www.amazon.com/dp/B0746V4B5S/

Fitment is fantastic and feels sturdy but only time will tell how great the finish will hold up.

Examples of what I'm talking about, this is VERY common on amazon for products, to source a generic and sell it. These are the same products being sold:

https://www.amazon.com/Wrangler-07-15-Angry-Style-Bumper/dp/B01FHQEA8Y/

Has three sellers competing for the "Generic" non branded one. Drives price down, and builds no cross sales or loyalty.

https://www.amazon.com/Xprite-Grille-Wrangler-Rubicon-2007-2016/dp/B0186CZGYI/

Exact same product, probably the same manufacturer. But this guy is private labeling it. Selling it under his brand name, probably slapping his own logo and information on the box it ships in. Notice the only competition for his buy box is his FBA and FBM fullfillment options. (He's probably using FBM as a backup in case his FBA stock runs out).

You can see similar all over amazon. Look up the knock off yeti cups that everyone is buying. There are "Generics" where 5 - 10 people are competing. And then there are ones where they slapped a new logo on it and they can control the price better.

Thanks! I waited years to find the right 6MT. I really wanted a V6 but needed couple extra doors. Bought the grille off Amazon then a friend helped me install in about an hour.

https://www.amazon.com/2016-2017-Generation-Honda-Accord-Grille/dp/B0787GV289

4 canoes? two nights total? if so, I assume you can bring a lot of coolers.

cook just like car camping. steaks, burgers, brats, and lots of beer.

is the cabin near the water? wheeled coolers able to make it?

these are great for firepit cooking:

https://www.amazon.com/Stromberg-Carlson-GR-1522-Stake-Grille/dp/B00JYX5WFW

Here is the grill I bought off amazon. I dremeled the middle 'guts' out and then applied fiberglass and resin to the gapped areas, then bondo'd the remaining area so it was smooth on the fwd side where it's visible to the public. Hope this helps! I can take more detailed pics if you would like.

OE Replacement Toyota 4-Runner Grille Assembly (Partslink Number TO1200202) by Multiple Manufacturers http://www.amazon.com/dp/B004GEMVJY/ref=cm_sw_r_udp_awd_1-Mdub183TGHB

Bought 9/1, came today. Fit was good, no issues. Definitely watch some videos.

Also, when you are taking the grill out, there are tabs at the top as well. None of the videos showed them, so I ended up breaking one. No big deal, there are about 6 in 24".

I have a 2014 which has very limited options for aftermarket grills.
My understanding is that you have to remove the entire front bumper if you wished to change it so i'm thinking it just isnt a popular mod.

In my search i did see more options for the series 2 so perhaps its easier?
Anyway, im guessing this is closest to what you're looking for.

I ended up getting a mesh cover from Russia and really love it!

I bought this one https://www.amazon.com/dp/B073BXJRD7/ref=cm_sw_r_cp_api_x1M3AbMK3J8QS

I had to trim off the two large tabs at the top. Not sure if that’s a Titanium thing or not but it fit perfectly once I did that.

Thanks! They are the softer white option. I wanted it to accent the DRL and not act as a light bar.

Z8LED Grille LED White Lights Fit for TACOMA TRD Grille (Four Units,White) Black Housing https://www.amazon.com/dp/B07W5N8H9S/ref=cm_sw_r_cp_api_i_V7NBDb5VNN8PN

Got them off amazon, currently unavailable. Heres the link if you’re still interested! Also if you want the headlight bezels

If you want the oem grill go with this:
https://www.amazon.com/Toyota-4runner-Black-Grille-2014-2015/dp/B011CPCHMA
If you want to save a couple of hundred and have the same affect buy this one as their essentially the same:
https://www.amazon.com/ProooAuto-Upper-Grille-2014-2019-4Runner/dp/B07KQ32FZW/ref=sr_1_3?keywords=4runner+grill&qid=1555803916&s=gateway&sr=8-3

I don't have time to watch right now, but if you have issues with the unibrow grille, there's a port installed option for a different one that looks much better. But I can predict other potential issues with the side profile and rear lol.

Rockauto probably has it cheaper, but every part you'll need other than bumper guard squeezies.

​

https://www.amazon.com/dp/B016PS9POC/ - grille

https://www.amazon.com/Crash-Parts-Plus-Headlight-Mounting/dp/B01KILYQOQ - header panel

https://www.amazon.com/Jeep-Replacement-Turn-Signal-Light/dp/B002PQJ9HC - front signals

https://www.amazon.com/Jeep-Replacement-Corner-Light-Unit/dp/B002PQOA8K - corner signals

https://www.amazon.com/Omix-Ada-12421-01-Headlight-Housing/dp/B000FQ1XZA

https://www.amazon.com/Omix-Ada-12421-02-Headlight-Housing/dp/B000FQ7QFQ - headlights, easier to get both and assemble the entire panel as one piece

https://www.amazon.com/Dorman-42185-Headlight-Adjusting-Screw - x2 get two sets, they are cheap enough to get new instead of trying to reuse

https://www.amazon.com/Omix-Ada-12420-03-Headlight-Retaining-Ring/dp/B000FQ247Q - get two

https://www.amazon.com/Omix-Ada-12419-10-Headlight-Bezel/dp/B000FQ24AI

https://www.amazon.com/Omix-Ada-12419-09-Headlight-Bezel/dp/B000FQ95LO - left and right headlight bezels

https://www.amazon.com/dp/B004GCD2QW/

https://www.amazon.com/Omix-Ada-12035-46-Bumper-End-Cap/dp/B000FQ06VM

https://www.amazon.com/Omix-Ada-12035-47-Bumper-End-Cap/dp/B000FQ7QDS - bumper and end caps

https://www.amazon.com/CHEROKEE-84-01-FRONT-LICENSE-BRACKET/dp/B00C7Y82V6 - license plate bracket

https://www.amazon.com/dp/B009DJXSHQ/ - fender

Yeah, i'm kinda jealous of what you guys are allowed to do over there. I managed to put in the new rear lights as well and will tint the rear window.

FK Sportgrill Frontgrill Kühlergrill Grill FKSGMA003 von FK Automotive http://www.amazon.de/dp/B002RRW3P4/ref=cm_sw_r_other_udp_awd_7IOKwb38NSMRY

That's the grille i bought. I only took 3 friends and 4 beers to install so i'm fine with not having the dealer do it.

Looks like Amazon has them

https://www.amazon.com/Paramount-Restyling-41-0160-Raptor-Style-Packaged/dp/B016RURADQ


Here's one that comes with the F and R

https://www.amazon.com/dp/B079YY93GY/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B079YY93GY&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=950202000752607969&pf_rd_r=5N9Q8RGF2G7H8ZBNBWW7&pd_rd_wg=a2psM&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&pd_rd_w=HHp5f&pf_rd_i=desktop-dp-sims&pd_rd_r=99da0b92-59fa-11e8-a532-1b8228080e91

Not hard at all! Just a matter of about a dozen screws and two dozen plastic clips. Took me about 15 minutes. Got mine off Amazon for a little less than $400. Free shipping, too! Here's the link: https://www.amazon.com/gp/aw/d/B01NGTBOKM/ref=mp_s_a_1_1?ie=UTF8&qid=1498955113&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=trd+pro+grill&dpPl=1&dpID=51PWwYlqWXL&ref=plSrch

LED headlight bracket

LED Headlights

Auxillary Light LED

Integrated Tail Light

Bar End Mirrors

Radiator Guard

Rear Swingarm Spools

Mirror Mount Block off

Frame Sliders
This company sells a larger set of spools & sliders that is great!

CS Escapamentos Exhaust

Wind Screen

Levers

Block off plate substitute this is for when you get a full exhaust, youtube "block off plates z900" for more info
The prices all vary and there's PLENTY of options elsewhere. I just happened to get these over time. I also bought an engine guard/cage on Amazon but never could get it to fit properly.

You might look into this. I saw it browsing Amazon, and according to the seller it should fit.

https://www.amazon.com/dp/B07FPWV3KG/ref=cm_sw_r_cp_api_i_8HtnDbXDCG02G

I bought this grill:
Ford Fusion 2013-2016 Gloss Black Front Bumper Honeycomb Mesh Grill https://www.amazon.com/dp/B073BXJRD7/ref=cm_sw_r_cp_api_i_elyyCbZMKM896

I'm not mechanically inclined at all and it took me two hours. I followed a YouTube that walked me through it. Overall it was very easy. If I did it again it would likely take me 45 min - 1 hr now that I know the general steps.

There's a couple lugs inside the wheel well you have to remove that are a huge pain in the ass to remove while the tire is on. The video I followed recommended removing the tire to get to the nut but I managed to do it without doing that.

It was completely worth it, I think the car looks much sexier now.

There's a guy on Tacoma World who's making replicas that don't have "Toyota" on the front for 250, but I wanted OEM quality. I got it off Amazon for 396 which isn't bad considering the dealer wants 499 for it.

Toyota of Vineland in NJ is selling them on Amazon: https://smile.amazon.com/gp/product/B01NGTBOKM/

https://www.amazon.com/Toyota-Tacoma-Grille-Insert-PT228-35170/dp/B01NGTBOKM/ref=cm_cr_othr_d_product_top?ie=UTF8

TRD Pro grille

https://www.amazon.com/dp/B01NGTBOKM/ref=cm_sw_r_cp_api_gOeZzb5TVYNRF

Here's a simple folding grill.

Lodge and Camp Chef have tripods for Dutch ovens or grills that can hold skillets or food over your fire pit.

Here are links for a few, different, swivel, grills.

My bad. It was Amazon. Ford Fusion 2013-2016 Gloss Black... https://www.amazon.com/dp/B073BXJRD7?ref=ppx_pop_mob_ap_share