(Part 2) Reddit mentions: The best cabinet & furniture pulls
We found 94 Reddit comments discussing the best cabinet & furniture pulls. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 62 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Diamond Steel 12 inch
- Crafted from the highest quality materials
- Built for performance and durability
- Made in United States
- Sanitary plastic handle with large guard for safety and Color coded ring for easy grit designation and easy hang-up
- Extra-fine grit for regular honing or final polishing step
- Sanitary plastic handle with large guard for safety and Color coded ring for easy grit designation and easy hang-up
- Extra-fine grit for regular honing or final polishing step
- Sharpens knives faster than conventional stones with DMT's monocrystalline diamond surface
- No oil is needed-sharpen dry or with water
- Durable construction will provide years of consistent performance and reliable service
Features:
Specs:
Color | 12-Inch |
Height | 3.5 Inches |
Length | 24 Inches |
Number of items | 1 |
Size | 12-Inch |
Weight | 0.65 Pounds |
Width | 16.25 Inches |
22. Hickory Hardware P8157-DAC 3-Inch Manor House Cabinet Pull, 3-Inch, Dark Antique Copper
- Dark Antique Copper
- Bar
- Manor House collection
- 3 inch center to center
- L: 5-3/4 inch w: 1-3/4 inch p: 3/4 inch
- Dark Antique Copper Finish
- Mounting Hardware Included
- Manor House Collection
Features:
Specs:
Color | Dark Antique Copper |
Height | 0.75 Inches |
Length | 5.75 Inches |
Number of items | 1 |
Size | 3 in |
Weight | 0.01 Pounds |
Width | 1.75 Inches |
23. The Bulldog Hardware 2000204 Mesh Basket-Value Pack
- Peg Board Friendly Baskets
- Wire/Mesh Construction for easy visability and durability
- Ability to hold large objects or a variety of smaller objects
- This set includes a Small, Medium and Large Basket
- The set includes a Small, Medium and Large Basket and the basket Measurements are (Small) 6.25 inch L x 3.25 inch W x 2.25 inch D, (Medium) 7.9 inch L x 4 inch W x 3.1 inch D, (Large) 12 inch L x 6 inch W x 4 inch D
Features:
Specs:
Color | Black |
Height | 4.4 Inches |
Length | 11.9 Inches |
Number of items | 1 |
Weight | 1.5 Pounds |
Width | 6 Inches |
24. SE - Pull-Apart Key Ring (4 Pack) by ProTool
- Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck
- Suitable for bits with 1/4" Hex head drive
- Rapidaptor technology for rapid bit change
- Multi-component Kraftform handle fits the shape to the hand erasing the physical stresses of screwdriving
Features:
Specs:
Height | 0.1 Inches |
Length | 4.199999996 Inches |
Weight | 0.1 Pounds |
Width | 2.499999997 Inches |
25. homdiy Cabinet Pulls Brushed Nickel 5 Pack Brushed Nickel Cabinet Handles 5in Hole Center - HD201SN Bathroom Cabinet Hardware Pulls Brushed Nickel Metal Drawer Pulls for Kitchen, Closet, Wardrobe
PACK of 5 Cabinet Handles;Made of High Quality Stainless Steel with Brushed Nickel Finish,Hollow Construction but After Attaching Them they Definitely Feel SolidMEASUREMENT: 5in Center to Center with 7-1/2in Overall Length;Diameter:12mm(1/2in),Height:32mm(1-1/4in)NOTES: Each handle includes 1 inch &...
Specs:
Color | 5 Pack |
Height | 0.01 Inches |
Length | 7 Inches |
Number of items | 5 |
Size | 5in hole centers |
Width | 1 Inches |
26. AmazonBasics Wide Bin Cup Drawer Pull, 3.69-inch Length (3-inch Hole Center), Flat Black, 10-Pack
- Flat Black Finish
- Pull length: 3. 69-inch
- Hole to hole center: 3-inch
- Projection: 0. 95-inch
- includes M8-32 x 22mm( 0.86 inch) and M8-32 x 40mm (1.57 inch) mounting screws
- 10-Pack
Features:
Specs:
Color | Flat Black Finish |
Height | 0.004 Inches |
Length | 1.2598432 Inches |
Number of items | 10 |
Size | 3.69" Length (3" Hole Center) |
Width | 0.8661422 Inches |
27. Best Commercial Stainless Steel Single Handle Pull Down Sprayer Kitchen Faucet, Pull Out Kitchen Faucets Brushed Nickel
One Hole Easy Installation. Not included base plate to cover the sink holes. Please order separately.Fitting both 3/8” and 1/2” water supply hose. Quick connector make sure leak-proof.Durable Brushed Steel Finish: resists tarnish and corrosion from daily use. Premium Ceramic Disc designer faucet...
Specs:
Color | Brushed Nickel |
Height | 2.5 Inches |
Length | 23 Inches |
Weight | 6 Pounds |
Width | 10 Inches |
28. Reliable Hardware Company RH-0520BK-A Large Spring Loaded Recessed Handle, Black
7.00'' W x 5.00'' H x .625'' D - Ultra Deep 5/8'' Recess14 Mounting Holes .196'' Diameter14 Gauge SteelBlack Powder Coat FinishStainless Steel Spring Loaded Handle - 75'' Diameter Rubber Grip
Specs:
Height | 0.004 Inches |
Length | 7 Inches |
Number of items | 1 |
Weight | 1.29 Pounds |
Width | 1 Inches |
29. AmazonBasics Euro Bar Cabinet Handle (1/2-inch Diameter), 10-inch Length (7.5-inch Hole Center), Satin Nickel, 10-Pack
- 10-pack of Euro bar cabinet handles for adding a polished look to cabinets, cupboards and more; satin nickle finish
- Pull length: 10-inch
- Hole to hole center: 7.5-inch
- Projection: 1.38-inch
- Fits most cabinets; includes 1-inch & 1.5-inch mounting screws; you may need to purchase screws of additional length depending on your cabinet’s width; machine screw metric size: M8-32.
Features:
Specs:
Color | Satin Nickel |
Height | 0.5 Inches |
Length | 10 Inches |
Number of items | 10 |
Size | 10 in Length (7.5 in Hole Center) |
Weight | 0.552 Pounds |
Width | 1.38 Inches |
30. Kullavik 10 Pack Mordern Cabinet Hardware 3-11/16" (93mm) Bin Cup Drawer Handle Pull, 3" Inch (76mm) Hole Centers-Flat Black
✔️【STRONG & DURABLE HARDWARE】 Our cabinet cup bin drawer pulls are made of zinc alloy with oil rubbed bronze. The handle pull is made to be long lasting, accompanied with good looking and fine touch✔️【SIZE OF CABINET HARDWARE】 Overall Length: 3-11/16 inch; Width: 1-1/4 inch; Screw-ho...
Specs:
Color | Orange |
Height | 1.22 Inches |
Length | 3.78 Inches |
Number of items | 10 |
Size | 10 Pack |
Width | 1.18 Inches |
31. Rok Hardware Knob Handle Pull Drill Mounting Template for Cabinet Doors and Drawers
- FUNCTION: Aligns 3" (76mm), 3-3/4" (96mm), and 5-1/32" (128mm) handles. Used for drilling holes with precision toward accurate placement, making installation easy.
- MUST HAVE: This Cabinet Door & Drawer Drilling Template will allow you to install your pulls and knobs flawlessly.
- EASY TO USE: Simple step-by-step drilling measurement template instructions included. Boasts a precision design for easy drilling with the 3/16" drill bit for the right hole size.
- ADVANTAGES: This kit is the perfect tool to ease all types of projects with accuracy. It is easy to carry and lightweight.
- KIT INCLUDES: (1) Knob Drilling Template | (1) Pull Drilling Template | (1) 3/16" Drill bit
Features:
Specs:
Color | Orange |
Height | 0.00393700787 Inches |
Length | 4.72834645187 Inches |
Width | 4.72834645187 Inches |
32. Lot/Set of 6 Rust Rustic New 3.5 Inch Cast Iron Small DRAWER PULL Handle Cupboard Cabinet
- Rustic Cast Iron
- 3.75" end to end
- Finger grip space is a little less than 2.5"
- Please note screws are not included.
- 6 Pulls per purchase
Features:
Specs:
Color | Rustic Brown |
Height | 1 Inches |
Length | 3.5 Inches |
Size | 3.5" |
Weight | 0.75 Pounds |
Width | 1 Inches |
33. Reliable Hardware Company RH-0570BK-2-A Strap Handle with Black End Caps - Set of 2
10'' Overall Length021'' Counter Sunk Mounting Holes8-1/2'' Hole CentersSpring Steel InsertBlack Powder Coated Caps
Specs:
Height | 1.25 Inches |
Length | 10 Inches |
Number of items | 2 |
Width | 0.75 Inches |
34. 10Pack Gold Cabinet Drawer Pulls Kitchen Hardware - Goldenwarm 201GD76 Brushed Brass Cabinet Handles T Bar Door Pull Knobs 3in Hole Centers, 5in Overall Length
√ WIDELY USED: Perfectly apply to any kitchen cabinet,bathroom,cupboard,closet and much more!√ MATERIAL: The cabinet handles made of high quality stainless steel; Brushed brass finished color; Hollow but very sturdy and durable; Hard to get rusty.√ WHAT YOU GET: Pack of 10 brushed brass cabine...
Specs:
Color | Round (76mm Hole Centers) |
Height | 0.0393700787 Inches |
Length | 11.81102361 Inches |
Size | 10 Pack |
Weight | 0.82 Pounds |
Width | 4.724409444 Inches |
35. Goldenwarm 20Pack 50mm Long Single Hole Gold Cabinet Knobs and Pulls Door Cupboards Drawers Bedroom Furniture Handles Brushed Brass
MATERIAL - Our T bar cabinet handles and knobs are made of high quality stainless steel, hollow but sturdy and look beautiful and serve your purposes.SIZE - Diameter:12mm * overall length:50mm(2"); Projection:32mm(1-1/4") from the surface to the bar. Please measure your cabinet carefully then decide...
Specs:
Color | Brushed Brass |
Size | 20 Pack |
Weight | 0.82 Pounds |
36. Reliable Hardware Company RH-0540BK-2-A Set of 2 Chest Handle, Black
4.17'' W x 3.00'' H4 Mounting Holes .196'' Diameter16Gauge Plate / .315'' Diameter BailBlack Powder Coat Finish
Specs:
Color | Black |
Height | 3 Inches |
Length | 4 Inches |
Number of items | 1 |
Weight | 0.63 Pounds |
Width | 1 Inches |
37. Oak Drawer Pull
- Pack of 2. Single outlet adapter wall tap On/Off switch with light, polarized plugs (2-prong)
- Unit works with any standard AC outlet, ETL listed
- Perfect for devices or peripherals without built-in power On/Off switch
- Single-port power adapter with lighted On/Off Switch
- Adding a switch for the appliance, light, lamp, Christmas tree, etc.
Features:
38. LICTOP 15cm/5.9" Black Aluminum Home Kitchen Cabinets Drawers Collection Long Center Finger Edge Pull Tab Handle(6Pcs)
- ✔Package Included---- 6 x 150mm Finger Edge Tab Pull Handle,Screws
- ✔Product Material---- Crafted with a light weight Aluminum Alloy finish, our aluminum handles offer long-term durability & strength for all-purpose use.
- ✔Easy to Install---- Use a simple manual or powered Phillips-head screwdriver to attach these in seconds. Pre-drill holes to help maintain surface integrity.
- ✔Widely Use---- This Decorative Handle Can Be Used For Many Of Your Home Furniture. Offering Cabinet Handles, Bath Accessories, Switch Plates, Door Knockers, Doorbells and House Numbers to suit any home design.
- ♪PULL HANDLE SIZE--- Total Size: 150x 31x 18mm/5.9"x 1.22"x 0.7"(L * W * H) ,Please read the size before you purchase them.
Features:
Specs:
Color | Black |
Height | 0.0393700787 Inches |
Length | 59.05511805 Inches |
Size | 150mm/5.91" |
Width | 2.362204722 Inches |
39. Diamond Sharpening Steel
Crafted from the highest quality materialsBuilt for performance and durabilityMade in United StatesSanitary plastic handle with large guard for safety and Color coded ring for easy grit designation and easy hang-upExtra-Fine diamond to polish and refine an edgeSharpens knives faster than conventiona...
Specs:
Color | 14-Inch |
Height | 3.5 Inches |
Length | 24 Inches |
Number of items | 1 |
Size | 14-Inch |
Weight | 0.73125 Pounds |
Width | 16.25 Inches |
40. Sandusky Lee SLH-S Single Handle Set, Satin Finish
Works with Sandusky Lee storage cabinetsThis steel handle swings to the right and works with any Sandusky Lee storage cabinet with any fixed shelvesSteel FinishItem Package Dimension: 12.0" L x 9.0" W x 2.0" H
Specs:
Color | satin finish |
Number of items | 1 |
🎓 Reddit experts on cabinet & furniture pulls
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where cabinet & furniture pulls are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Ok so I got the legs from goodwill for $5 in the box and everything. But I honestly think they have them at Home Depot for like 20. I got the handles on amazon-they were an opened box. They were silver and the legs were black so I spray painted. I did sand it but not very much lol. The color is starlessnight by behr. And to everyone saying they like the wood more-lucky you your wouldn’t have to take the time to paint it! Thanks to everyone saying they like it!! handles ](https://www.amazon.com/dp/B01MS9NU0O?ref=ppx_pop_mob_ap_share)
Yea this shit is crazy expensive. Chances are you'll still get a better deal shipping from Amazon.com over here. Just make sure you get someone to actually buy it for you with an amazon Prime account. I saved $15 getting my brother (in the states) to send me this DMT D2SE Extra Fine Sharpening Steel.
I had a real hard time finding hardware I liked at the local big box stores. I find this on Amazon and am really happy with it so far.
Hickory Hardware P8157-DAC 3-Inch Manor House Cabinet Pull, 3-Inch, Dark Antique Copper https://www.amazon.com/dp/B004BTRZTK?ref=yo_pop_ma_swf
Thanks! I actually got the baskets from amazon - http://www.amazon.com/gp/aw/d/B002OXOFPC?pc_redir=1406884906&robot_redir=1. I wasn't sure how they would look, but I ended up really liking them.
Original post : https://reddit.com/r/ElectricSkateboarding/comments/8ciggf/wowgo_2s_deck_swap/
swapped earthwing superglider onto wowgo 2s. missed handle so bought these on amazon
Reliable Hardware Company RH-0570BK-2-A Strap Handle with Black End Caps - Set of 2 https://www.amazon.com/dp/B00JJ190AW?ref=yo_pop_ma_swf
drilled one into the board tonifht using standard hardware.
result: not bad! going to get some shorter hardware and clean up the lines but works well for short distances and preferred to a kayak handle!
Oh yeah! New handles! Who would have known a $2/door upgrade could make such a difference. I got some knobs similar to https://www.amazon.com/homdiy-Cabinet-Brushed-Nickel-Handles/dp/B073TWK9RC that went a long way to improving the kitchen.
The metal part is screwed on. What colour and style hardware do you reckon would work best? I was thinking shell knobs like this or perhaps a T-knob?
Here's the link
It's okay. Drips sometimes and wabbles alot, but I think that has more to do with my cheap sink. And the weight doesn't always pull the head back in. We're glad we bought it, but I don't expect to last more than 3-4 years.
Something like one of these maybe? I'm sure there are folding steel handles that would work at your local hardware store.
​
https://smile.amazon.com/Reliable-Hardware-Company-RH-0520BK-Recessed/dp/B00JQYVK82/ref=sr_1_6?ie=UTF8&qid=1537101185&sr=8-6&keywords=flush+mount+handle
I use an extra fine diamond coated honing rod
before putting mine away every time. When it needs sharpening, I get out the 4 sided diamond sharpening stone:
SE DF8524DS Diamond Whetstone Sharpening Block, 4-Grits https://www.amazon.com/dp/B001A6G0A2/ref=cm_sw_r_awd_OqDOub1H0MB0Y
Right on, I typically use stuff like this, especially for dressers / nightstands / desks, things like that.
https://www.amazon.com/Kullavik-10-Pack-Mordern-Cabinet-Hardware/dp/B07JLVHTKY/
I bought a 4$ jig off Amazon.
Rok Hardware Knob Handle Pull Drill Mounting Template for Cabinet Doors and Drawers https://www.amazon.com/dp/B01NADNB9N/ref=cm_sw_r_cp_apa_i_lvySDbC5HS7T6
It made it very fast. I had all the pulls done in about 30 mins.
Hardware for the drawer slides wasn't bad either. It came ready and assembled and lonly took 3 screws per side to drop in to pre-drilled holes. very easy.
Bro upgrade yo handles!!! something like this will due! https://www.amazon.com/Rustic-Drawer-Handle-Cupboard-Cabinet/dp/B00MH91MAE/ref=sr_1_3?ie=UTF8&qid=1519174280&sr=8-3&keywords=rustic+handles
I just spent $36 on these drawer pulls and cabinet pulls on Amazon and it made a huge difference in my kitchen
Hmm I was planning on bolting through for the recessed handles, though that'd still make the hole if that's the main issue. Maybe I'll switch to a different kind of handle.
Something more like this? https://www.amazon.com/gp/aw/d/B00JQYVGEK/ref=ya_aw_od_pi?ie=UTF8&psc=1
Whoa, I completely forgot to do this!
Gotta find a similar handle locally, since I'm not in Canada.
Would this work?
Is this the mounting tape that you used?
Would this work for the vinyl stair tread on top?
Something very clean, something modern.
these would work. they seem to be available in many lengths.
the left part look like apull-apart key chain https://www.amazon.com/SE-Pull-Apart-Ring-Pack-ProTool/dp/B0049J4WSE?ref_=fsclp_pl_dp_1
I had the issue of my key being stuck to my keyring while the car was running so I bought a quick detach keyring and it fixed that issue. I prefer a key because i can open it in the dark and not worry about seeing the numbers. Each safe has its pros and cons.
I assume I need something like this: Sandusky Lee SLH-S Single Handle Set, Satin Finish https://www.amazon.com/dp/B00KX27QJ8/ref=cm_sw_r_cp_api_AFXaAbMRRM2VV
But, I don’t have the piece it needs to lock to on the side where the screw is. What is that called?
https://www.amazon.com/dp/B01MS9NU0O?ref=ppx_pop_mob_ap_share
I have a similar problem and I use these to solve it.
http://www.amazon.com/gp/product/B0049J4WSE/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1944687602&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00IEYF6EO&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1KMHAYHW9GE47Y3AA4PW
I have the house keys on one end and the car keys on several of the other ends. So, when going out I just grab the house keys and the car key I need.