Reddit mentions: The best cabinet & furniture pulls
We found 94 Reddit comments discussing the best cabinet & furniture pulls. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 62 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Cosmas 305-030SN Satin Nickel Cabinet Hardware Euro Style Bar Handle Pull - 3" Hole Centers, 25 Pack
- Hole Centers / Drilling: 3"
- Overall Length: 5 3/8"
- Width: 1/2"
- Projection: 1 3/8"
- Individually Polybagged with 1" Mounting Screws Included
Features:
Specs:
Color | Satin Nickel |
Height | 0.01 Inches |
Length | 8 Inches |
Number of items | 25 |
Size | 25 Pack |
Weight | 8.11 Pounds |
Width | 1 Inches |
2. BL-123 Pair of 1" x 2" x 3" Precision Steel 1-2-3 Blocks
Our Part # ALL-55500Heat treated and case hardened to HRC 57-62. Made of precision-grade tool steel hardened and ground on all 6 sides of blockAccuracy and squareness on all sides within .0001"-.0002"23 holes includes (5) 3/8-16 threaded holes for clamping and (18) untapped holes Cross drilling desi...
Specs:
Color | Original version |
Height | 2.99999999694 Inches |
Length | 0.99999999898 Inches |
Number of items | 1 |
Weight | 2 Pounds |
Width | 0.99999999898 Inches |
3. niceEshop(TM) Lion Head Vintage Brass Cabinet Cupboard Door Pull Handle-Bronze
4. Fastcap Adhesive Cover Caps PVC, White
- Cover screws with these easy to apply matching adhesive caps
- 9/16" dia adhesive cover cap
- Pvc adhesive cap
- Color white
Features:
Specs:
Color | White |
Height | 1 Inches |
Length | 0.1 Inches |
Weight | 0.01 Pounds |
Width | 1 Inches |
5. Diamond Sharpening Steel
- Crafted from the highest quality materials
- Built for performance and durability
- Made in United States
- Sanitary plastic handle with large guard for safety and Color coded ring for easy grit designation and easy hang-up
- Fine diamond for a razor sharp edge
- Sanitary plastic handle with large guard for safety and Color coded ring for easy grit designation and easy hang-up
- Fine diamond for a razor sharp edge
- Sharpens knives faster than conventional stones with DMT's monocrystalline diamond surface
- No oil is needed-sharpen dry or with water
- Durable construction will provide years of consistent performance and reliable service
Features:
Specs:
Color | BLACK,SILVER |
Height | 3.5 Inches |
Length | 24 Inches |
Number of items | 1 |
Size | 12-Inch |
Weight | 0.65 pounds |
Width | 16.25 Inches |
6. 36 Pack Kitchen Cabinet Handles Sunriver 26 Pack Cabinet Pulls Brushed Satin Nickel 10 Pack Cabinet Door Knobs 3-3/4" Hole Center Stainless Steel Cabinet Hardware for Bathroom Cupboard Door and Drawer
- WIDELY COMPATIBLE - Cabinet handles set, suitable for different styles of cabinets, wardrobe, wine cabinet, locker. Handle combination of two styles, you can freely match according to your furniture.
- REASONABLE SIZE - Satin nickel bar pull: Overall Length: 6 inch (150mm); Hole Centers / Drilling: 3-3/4 inch/3.75inch (96mm/9.6CM); Diameter: 1/2 inch (12mm).
- EASY TO USE - Easily and quickly update your cabinet doors and drawers with these beautiful kitchen drawer pulls and solid stainless knobs. Knobs Size: Diameter: 1-1/8'' (28mm); Height: 1''(26mm);Base of Knob Diameter: 4/5''(20mm)。
- WHAT YOU GET– Come with 26 Pack Pulls Handle(52g/Handle)+10 Pack Knobs(50g/Knob) and (124) pack 1.81" break away screw, you can customize it to the length you need for the materials and thicknesses of the cabinet. Make your installation easier.
- LIFETIME GUARANTEE - Please feel free to contact us if you have any issues with your pull knobs, we'll send you the replacement ASAP. You take NO RISK if you order now by clicking the orange “Add To Cart” button on this page!
Features:
Specs:
Color | Type 1: 3-3/4 Inch Hole/26pcs Pulls+10pcs Knobs-Silver |
Height | 0.01 Inches |
Length | 150 Inches |
Size | Handle pulls and knobs |
Weight | 3.75 Pounds |
Width | 1 Inches |
7. Ultra Hardware 59156 Cabinet Hardware Handle Pull, 10 Count
BEAUTIFUL CABINET PULLS: The Ultra Hardware Decorative Hardware Pull features a Satin Nickel finish to bring out the look of your home. Ideal for use as a functional accent for kitchen or bathroom cabinets and furniture. 1" Mounting screws included for easy installation.PAIRS PERFECTLY WITH YOUR DÉ...
Specs:
Color | Satin Nickel |
Height | 0.59 Inches |
Length | 7.6 Inches |
Number of items | 1 |
Size | 1 Pack = 10 Pulls |
Weight | 0.7 Pounds |
Width | 4.72 Inches |
8. Franklin Brass P29520K-904-B 3" (76mm) Straight Bar Pull, 10-pack, Heirloom Silver, 10 Piece
Smooth gunmetal finish with dark undertonesClassic styling with sleek detailing gives your kitchen or bathroom a timeless eleganceEach item is individually packaged to protect the finishStandard installation hardware is includedLimited lifetime warranty
Specs:
Color | Heirloom Silver |
Height | 0.35 Inches |
Length | 3.94 Inches |
Number of items | 1 |
Size | 3" (76 mm) |
Weight | 1.35 Pounds |
Width | 1.2 Inches |
9. Reliable Hardware Company RH-1510-8-A Set of 8 3-Leg Amp/Cabinet Corner, Nickel
1.50'' x 1.50'' x 1.50''.50'' Internal Radius3 Mounting Holes .18'' Diameter18 Gauge SteelNickel Finish
Specs:
Height | 2 Inches |
Length | 2 Inches |
Number of items | 8 |
Weight | 0.37 Pounds |
Width | 2 Inches |
10. Delta Faucet EP74854 Solenoid Assembly for Widespread Pull-Down,Chrome
- Solenoid Assembly
- Features Tempsense
- Model Number: EP74854
- Country Of Origin: United States
- NOTE: Product color may vary
- Use with Pilar Touch2O Technology pull-down & bar / prep kitchen faucets
- Features TempSense Technology
Features:
Specs:
Color | Black |
Height | 2.5 Inches |
Length | 9 Inches |
Number of items | 1 |
Weight | 0.75 Pounds |
Width | 2.5 Inches |
11. Renovator's Supply Cabinet Pull Ring RSF Iron Black Set Of 6
Cabinet Pull Ring RSF Iron Black Set Of 6Colonial Style Ring Pull3/4" High x 3/4" Wide x 1-7/8" DiaRustproof RSF FinishMounting Screws Included
Specs:
Color | Black |
Height | 2.16 Inches |
Length | 2.16 Inches |
Number of items | 1 |
Size | Pack of 6 |
Weight | 0.85 Pounds |
Width | 2 Inches |
12. Liberty AN0191C-G-Q1 Alignright Cabinet Hardware Knob/Pull Mounting Kit
Made from durable plastic with molded measurement linesClear smoky finish allows users to see through the template for enhanced usabilityIncludes a 3/16 in. (5 mm) standard drill bit to ensure correctly sized mounting holesStep by step visual Instructions included on the back of the packaging
Specs:
Height | 0.1 Inches |
Length | 5.5 Inches |
Number of items | 1 |
Size | For Pulls Up To 4” in Length |
Weight | 0.15 Pounds |
Width | 4.5 Inches |
13. Mid-Century Solid Brass 1" Large Modern Cabinet Knob - Handle Pull Furniture Door T Bar Knobs and Pull Handles Golden - Single Hole
- Brass 1" Modern Cabinet Knob
- Projection: 1"
- Diameter: 1"
- Satin Brass Finish (solid brass construction)
- PLEASE ORDER A SINGLE ITEM AS SAMPLE BEFORE PLACING LARGER ORDER. A 20% RESTOCKING FEE APPLIES TO ALL RETURNS.
Features:
Specs:
Color | Brass |
Weight | 1 Pounds |
14. Cosmas 4310ORB Oil Rubbed Bronze Cabinet Hardware Bin Cup Drawer Handle Pull - 3" Inch (76mm) Hole Centers - 10 Pack
High Quality Oil Rubbed Bronze FinishHole Centers: 3" (76mm)Overall Length: 3-1/2"Width: 1-5/8" --- Projection 1"Individually Polybagged with 1" Mounting Screws Included
Specs:
Color | Oil-Rubbed Bronze |
Height | 0.004 Inches |
Length | 7.7 Inches |
Number of items | 10 |
Size | 10 Pack |
Width | 2.3 Inches |
15. Cosmas 6632SN Satin Nickel Cabinet Hardware Handle Pull - 3" Inch (76mm) Hole Centers - 10 Pack
- High Quality Satin Nickel Finish
- Hole Centers/Drilling: 3" (76mm)
- Overall Length: 4-5/8"
- Width: 7/8" --- Projection 1"
- Individually Polybagged with 1" Mounting Screws Included
Features:
Specs:
Color | Satin Nickel |
Height | 0.01 Inches |
Length | 8 Inches |
Size | 10 Pack |
Width | 7 Inches |
16. Hickory Hardware P3001-BI 3-Inch Refined Rustic Pull, Black Iron
- 3 Inch Center to Center; Projection: 1-1/4 Inch; Length: 4-3/4 Inch; Width: 13/16 Inch
- The Refined Rustic collection is a full collection of hardware that is sure to fill your need for something rustic. These pieces give your space the look of hand crafted artisanal pieces in a range of sizes. The appliance pulls are a great option for beautiful barn door pulls.
- The Black Iron finish coordinates with most black interior elements. It features subtle varriations in texture for a time-worn or blacksmith appearance and a matte protective coating.
- Hand hammered patterns and textures add to the rustic look.
- All essential mounting hardware included for an effortless installation.
Features:
Specs:
Color | Black Iron |
Height | 1.25 Inches |
Length | 4.75 Inches |
Number of items | 1 |
Size | 3 Inch Center to Center |
Weight | 0.05 Pounds |
Width | 0.81 Inches |
17. homdiy Kitchen Cabinet Handles Brushed Nickel 5 Pack 2-1/2in Hole Center Modern Cabinet Pulls - HD201SN T Bar Drawer Pulls Brushed Nickel Cabinet Hardware Pulls for Bathroom, Closet, Wardrobe
- MEASUREMENTS:2-1/2 inch Center to Center with 4 in Overall Length.
- PERFECT SERVICE: Money back guarantee, if there's any problem please feel free to contact us, we will refund every penny of your money or give you a replacement.
- MATERIAL & FINISHED:Brushed Nickel cabinet handles made of high quality Stainless Steel with Brushed Nickel finished,they are hollow construction,lightweight but strong and durable.
- PACKAGE INCLUDE: Matched with standard screws(1 inch & 1.65 inch) per handlles. Every pull is individually wrapped and bagged to protect the beautiful color.
- FITS PERFECTLY:homdiy nickel cabinet handles blend in rather than jumping out visually in the room and they can be a very key in bringing the design together.
Features:
Specs:
Color | 5 Pack |
Height | 0.01 Inches |
Length | 4 Inches |
Number of items | 5 |
Size | 2-1/2in hole centers |
Width | 1 Inches |
18. AmazonBasics Modern Arch Cabinet Handle, 4-inch Length (3-inch Hole Center), Polished Chrome, 10-Pack
- Polished Chrome Finish
- Pull length: 4-inch
- Hole to hole center: 3-inch
- Projection: 0. 64-inch
- includes M8-32 x 22mm( 0.86 inch) and M8-32 x 40mm (1.57 inch) mounting screws
Features:
Specs:
Color | Polished Chrome |
Height | 0.74 Inches |
Length | 0.42 Inches |
Size | 4" Length (3" Hole Center) |
Width | 3.99 Inches |
19. Goldenwarm 5pcs Brushed Brass Cabinet Cupboard Drawer Door Handle Pull Knob for Furniture Kitchen Hardware 8-4/5in Hole Center 11-1/3in Overall Length
★MEASUREMENT: Hole Centers:224mm(8-4/5"); Overall Length:288mm(11-1/3"); Diameter:12mm★DURABLE & STRONG: Our gold pulls made of stainless steel finished with brushed brass, sturdy and durable, free from rust, and the feeling of soft hand displays the modern sense of fashion.★WIDELY COMPATIBLE:...
Specs:
Color | 5 Pack |
Size | 8-4/5in Hole Centers |
20. Baldwin 0465140 Edge Pull, Bright Nickel
Baldwin's flush ring pulls are crafted from solid for maximum strength and durabilityRecommended for marine useAvailable in a wide variety of durable Baldwin finishes
Specs:
Color | Bright Nickel |
Height | 0.75 Inches |
Length | 4 Inches |
Number of items | 1 |
Weight | 0.0992080179 Pounds |
Width | 2 Inches |
🎓 Reddit experts on cabinet & furniture pulls
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where cabinet & furniture pulls are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Omg those colors are terrible. I'm so sorry!
You're renting right? Have you ever painted anything before? First things first, ask the landlord if he'll supply the paint if you supply the labor. It can't hurt! But you'd need to do a decent job sooo...
I'd go with a cool white in the kitchen. They make special super smooth durable paint for cupboards, but it's pricy! It finishes more like an enamel. Try to find out what kind of paint was used previously. You may need a primer and if you aren't sure, definitely get primer. Just do everything white, and research how to paint cupboards. 90% of a good paint job is prep work! Things like sanding, removing hardware, priming, taking cupboards doors down, etc. I wouldn't waste time on the insides unless you're really anal about stuff. I always bought the rubbery liners for mine.
If the landlord allows, I'd add hardware to the cupboards as well. These are a decent clean look:
Cosmas 305-030SN Satin Nickel Cabinet Hardware Euro Style Bar Handle Pull - 3" Hole Centers, 5-3/8" Overall Length - 25 Pack https://www.amazon.com/dp/B01D0KWBJ4/ref=cm_sw_r_cp_api_j3RDzbD9DSWFH
But measure to see what makes sense. Drill and sand the holes before painting and look to see if there were pre-existing pulls. If so, try to re-use those old holes (sometimes they are patched and painted over). Path of least resistance and so forth...
The kitchen looks small with no natural light so I think the under cabinet LED strips are a great idea. Something like this might work - I would go with warm lighting just so the white isn't so stark.
Albrillo LED Under Cabinet Lighting Dimmable Warm White, 12W 900 Lumens, 3 Pack https://www.amazon.com/dp/B01ARQY31S/ref=cm_sw_r_cp_api_X7RDzb9EGZ4KM
For the living area just get rid of that ugly neon vomit color as fast as possible. Dear god. Do not leave any of that.
I would aim for something in a very light warm gray (I know it's not the most revolutionary but it works) for the walls or if you want to go modern, a nice crisp white. You can always add warmth and color with textiles (furniture, rugs, curtains) so don't be afraid of doing a fresh box in white if you want the light. Use a matte or eggshell finish in the living room. Anything with gloss will highlight EVERY imperfection in the walls.
If your living room windows are subject to passerby's views, I'd consider getting a double rod for curtains. A softly textured sheer curtain will allow lots of light in the daytime while still obscuring you from unwanted attention. Something like this:
Best Dreamcity Faux Linen Sheer White Curtains / Draperies for Bedroom (Pack of 2 Panels, W52" by L84", White) https://www.amazon.com/dp/B01F03O5SO/ref=cm_sw_r_cp_api_rbSDzb6SMDNRP
You can then choose a thicker curtain for the outer rod for evening privacy. (Sheers tend to be much more sheer at night when lights are on inside.)
Since it's a basement apartment, if the ceilings are low, you can trick the eye into seeing the ceilings as higher if you hang the rod closer to the ceiling but it looks like you have standard height ceilings so I think a standard 84" long curtain length would work out fine.
As far as furniture goes, it's so subjective, but the setup in the pic looks good! I would stay with neutrals, personally, and add color through throw blankets or toss pillows and artwork and accent pieces (be they plants or statuary or what have you). I'm still a big fan of grey. It's a one bed so I'd consider a sleeper sofa. They've come a long way and you don't have to get something that looks like it lived at your grandmas. Something along these lines would work well, I think. (The added storage is a nice bonus too.)
Poundex F6931 Bobkona Jassi Linen-Like Sectional with Pull-Out Bed and Compartment, Blue Grey https://www.amazon.com/dp/B01CAJSC1W/ref=cm_sw_r_cp_api_chSDzbBPEP4EG
I'd add some large area rugs. Definitely some artwork. Society6.com is a good place to find interesting art on a budget.
Add some simple mirrors on the walls as well - ideally one large one on the wall opposite the windows to reflect light back through the apartment. It would make a world of difference for you. I'm kinda pushing you in the clean and modern direction so I'd recommend something like this:
Raphael Rozen - Elegant - Modern - Classic - Vintage - Rustic - Hanging Framed Wall Mounted Mirror, Distressed Wood Finish, Gray - White Color https://www.amazon.com/dp/B01G2FVBOA/ref=cm_sw_r_cp_api_kmSDzbASV1EQ2
It could add some warmth and texture to what might otherwise be a bland wall. Adding some floating shelves below or to the sides with some favorite books or mementos might be nice as well.
Definitely add some floor lamps and perhaps a side table lamp or two as well. Lighting is so much more important than people give it credit for. Always buy soft white. I actually really like Edison bulbs inside of lamps because they are a soft and soothing lighting, even when covered by lamp shades. They make a nice point of interest too. I always buy lamps with 3-way switches also. You'll never realize how awesome it is until you have it and then you'll use it constantly. (Won't work with the Edison bulbs though - you'll have to buy the dimmable lightbulbs). If you want the Edison bulb look to be a part of the decor, these lamps are pretty fun and work well for date night lighting, chilling on the couch eating snacks and watching Netflix lighting etc.
Injuicy Lighting Loft Retro Industrial E27 Edison Bulb Wooden Base Table Lights Vintage Antique Wood Desk Lamp for Bedside Bedroom Living Dining Room Home Corridor with Switch(Black) https://www.amazon.com/dp/B01FYRD37U/ref=cm_sw_r_cp_api_HrSDzb4CXRZ75
If you're buying area rugs - get them larger. You want to define a space with it - not have a bath mat between your couch and your coffee table.
Get a coffee table with storage. Having a place for all your stuff is key to keeping things looking nice and uncluttered. I love having lots of blankets around because I tend to hunker down in winter but if you're really minimalist you could get away with not having storage.
If you don't have a coat closet and you don't have a large entry for a standard coat hook wall hanging try one of these for the things you use every day:
JustNile Versatile Metal 180 Degree Triple Pronged Swivel Swing Arm Wall Mounted Hook, Set of 2 https://www.amazon.com/dp/B06Y5C5CSW/ref=cm_sw_r_cp_api_OvSDzbBWNGVNK
And that's where I'm gonna stop because I do have to work tomorrow.
One caveat - I did push for a more modern look BUT all of this advice would work if you like a more traditional style too. Key points being lots of neutrals and don't get too crazy with accent colors. Match your finishes on metals as much as possible and just try to keep things within the same finish family.
One of the huge problems this place has right now is a warm matte grayish violet as the kitchen accent and a an oddly cool yellow green semi gloss on the walls. Just choose warm or cool (I like warm, personally, especially for places with light walls) and stick to it. If you try to keep things cohesive you'll generally end up happy with the result!
Good luck! Post your afters for us!
First, I gotta say. I love your house. The stairway is amazing. The rooms are awesome. Second, I have to warn you that I'm horrible with spacing/bullet points.
This is all my own opinion btw. I’m not an interior designer/decorator. Read at your own risk.
I’m not sure whether you like traditional or modern style, but I think with this kind of home, you should go with “traditional décor”. Pintrest that stuff. It’s great. Tldr is that it’s new and old décor to look awesome. OR, even go with the style of this Redditor: http://imgur.com/a/AzALP
However, cheaply/rental, what I would do for the kitchen is:
Paint the cabinets a new color. Add new hardware. Repaint that wallpaper thing. You could put contact paper over the countertops as a temporary fix. (Youtube it. Shit is awesome.)
Please.
Also, your layout reminded me of this post: http://imgur.com/a/5URyz
Maybe you could get some ideas off of it?
Blue white and gray would look nice. If you do plain cabinet door faces they would be more reasonable depending on soft close and all. https://www.myscandinavianhome.com/2018/07/an-eclectic-19th-century the blue In this is gorgeous http://www.montenegrin.org/the-bathroom-design-decoration-33/ there’s basics you decide on. Like you like clean so I don’t think open shelves would work. Clean replacement doors and painting it blue or another color would work. Grays I would probably stay neutral with. There’s some now with purple undertones. They might look good but some colors can look funky if your lighting is cool and warm. There are some gorgeous grays like Sherman Williams Let it rain, Morning Fog, Lazy fog and Argos. Cabinets in Adriatic Sea, Blue Nile, Georgian Bay, Regatta for more muted Inky Blue, Denim, Bracing Blue. If you do cabinet knobs there are tons of options. I would stay clean or eclectic. Zahra Premium Quality Assorted Ceramic Knobs- Multi Color Mix Designed Ceramic Cupboard Cabinet Door Knobs Drawer Pulls & Chrome Hardware (20, Black & White) https://www.amazon.com/dp/B07R3RTH6N/ref=cm_sw_r_cp_tai_lTV1Db72CMK50, Artncraft Knobs Grey & White Cream Rare Hand Painted Ceramic Knobs Cabinet Drawer Pull Pulls (12 Knobs) https://www.amazon.com/dp/B07TCTR7TS/ref=cm_sw_r_cp_tai_VTV1DbJWSNGWD , 36 Pack Kitchen Cabinet Handles Sunriver 26 Pack Cabinet Pulls Brushed Satin Nickel 10 Pack Cabinet Door Knobs 3-3/4" Hole Center Stainless Steel Cabinet Hardware for Bathroom Cupboard Door and Drawer https://www.amazon.com/dp/B074SD6233/ref=cm_sw_r_cp_tai_NUV1DbCGD33NF there’s funky pumpkin knobs YDO Ceramic Glazed Pumpkin Knobs Classy Vintage Cabinet Door Pull Handle 6pcs (Blue) https://www.amazon.com/dp/B077QN7Z6H/ref=cm_sw_r_cp_tai_JVV1DbPV5SKPN . Otherwise stick with plain. If you plan to add any cabinets make sure the hardware you get can still be bought. I’ve had friends get gorgeous clearance stuff but changed their kitchen and couldn’t find anymore of them. They ended up replacing all the hardware. If you might add cabinets or island and get a good clearance deal buy extra.
The biggest things in our house were the things that didn't just make it look nicer, but also were a functional upgrade.
We got a new fridge/microwave/dishwasher and range (uhh, because they all had to match - we only NEEDED the fridge and microwave). The benefit is that they look great (GE Slate), and the fridge is Energy Star (besides AC, it's the biggest power draw in the house), the dishwasher is stainless inside and uses only... I think it's 4 gallons to do a full cycle and the acid test was getting the little tea infuser tongs spotless!
Replace boring round door knobs with brushed nickel door HANDLES. You don't really notice it directly, but it just freshens up the inside.
Replace yellowing and ugly outlet and switch plates. Or replace them all with Decora and probably use white instead of almond.
We also replaced a few of the old boob lights in closets and hallways with LED fixtures that put out a great and pleasant light.
No more dark and depressing closets, pantries and laundry rooms!
In the kitchen, adding knobs/handles to the doors is a huge improvement. Slow-close hinges is also a must.
I like the 'flush' (no 'open' ends) handles on anything below the counter so they don't catch and rip my pants. All my shorts suffer from catching pockets or belt loops on the bar style handles. Regardless of how convenient they are to hang towels from.
EDIT: We also really like using the IKEA picture ledges to put pictures up. We staggered a few of them for a more interesting look, but the main thing is that it avoids multiple holes in the wall to hang pictures from.
We can easily rearrange pictures by moving them by size or topic etc. on the ledges to achieve a different look.
Another thing I'm a pretty big fan of is keeping the house mostly painted very light/white colors and then decorate with colorful drapes, blinds and furniture. It's a lot easier to change the theme by just a new couch cover, drapes and sheets on the bed than to repaint a room because you're tired of the color.
Thanks! I'm hoping it can help people looking to make stands for relatively cheap. As others have posted, a more opaque black may blend better, but this still works well for my needs. Plus I like to see what's below the stand anyways.
Also, I'll possibly post a quick tutorial on the houses I made up the other night for my city combat. https://imgur.com/a/5qYM6 They're pretty much made out of foam core and hot glue. :P I think it must come out to maybe $0.75 a house. The flat roofs are nice, as you can describe them as a steepled roof, but it gives you a place to set a mini. The multi-level buildings can be split and pulled apart.
I got the foam core at amazon, and I use 3-2-1 blocks for aligning the walls when gluing. The only thing I'm not sure about is how long they will hold up. My main concern is moisture and warping, as I do not have a bottom piece on the buildings (only a roof).
https://www.amazon.com/gp/product/B018YLE368/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
Should be an interesting session tomorrow. Largest battle yet! The large group on the main road are civilians, the invaders are coming down the streets. The party has defend the civilians as they retreat to the castle (not pictured) on the right of the map. I still have to set a few more tokens on the map (including the PC's and some of their allies), but it should be quite a bit of fun assuming I can keep combat flowing well (Oh, and that minitaur is actually a giant ape... polymorph is a powerful spell)!
When I first saw my current home I felt the same about a lot of aspects of it. After a few tweaks the home really grew on me and I really love it.
Cabinets
Wall decor
Cabinet knobs
Switch plate covers
Faucet
I hope I captured the general feel of the design you like. I hope these will help you create your perfect kitchen.
Damn right I love heavy metal.
I would really love this! It's on my "household-y stuff" list. I want to get a set for all my cupboards. I think it'd make the kitchen look super rad and awesome. :D
Thank you for the contest! :)
Yep, definitely meant as a reply to that.. silly mobile app. Anyway, yes, MDF is not 'quite' traditional wood -- my suggestion would be to (carefully) drill 2 holes and secure a handle through a hanger strap on the inside with a couple of washers. This should provide more than adequate support.
As for a latch, something like this should work nicely.
Plus, if you're feeling really froggy, you could travel-ready the case a bit more with some briefcase/cabinet corners (similar to these).
Hey, that's my saw! Too funny. Just make sure it is straight and true. It worked great for my D-BOT. Just be ready for tiny aluminum shavings to go flying all over the place.
Use a machinest square to check the saw, something like this - https://www.amazon.com/BL-123-Precision-Steel-1-2-3-Blocks/dp/B00092CJC6/ref=sr_1_6?ie=UTF8&qid=1497885240&sr=8-6&keywords=machinist+square.
I can't find a copy of the full manual online, but there is an actual physical bypass of the solenoid that you can do instead of just removing the batteries.
After turning off the water to the unit, you can remove the solenoid by removing the plastic clips connecting the hoses to the top and bottom of the solenoid, removing those hoses, and plugging them into one another. One of the hoses has a male connector, and the other a female, so they will plug into one another and one of the clips from before can be used to secure the connection.
Just make sure to shut off the water to the unit before you unplug any hoses and have a towel to mop up whatever leaks out of the hoses as you shuffle them.
Edit: As long as your solenoid looks like this, you'll be able to plug the hose attached to the top white part into the hose attached to the bottom black part and secure it with the picture blue clip.
Those aren't bad, but they look a lot like the gate hardware from Lowes I'm referring to.
I'm looking for something that looks like it belongs on the indoor / decorative side, like the oil rubbed bronze or the satin finished nickel, etc.
But isn't going to snap in half.
I found these tonight, and wonder if wrought iron is strong enough for the job...
https://www.amazon.com/dp/B019563JDY/ref=psdc_511260_t3_B01LK6YXI2
If you can, reorient the appliances as suggested in this thread...because the space planning was horrid :/
Do you have layouts of the kitchens?
Easy low cost solutions would be to get a paint to closely match the counters. Paint the black splash area (and pack wall possibky but that might highlight the tiny window) in that color. Use a good sturdy kitchen paint that can withstand frequent washing.
Or affordable adhesive tiles that require no traditional installation http://www.homedepot.com/p/t/100599046?productId=100599046&storeId=10051&langId=-1&catalogId=10053&ci_sku=100599046&cm_mmc=shopping%2d%5f%2dgoogleads%2d%5f%2dpla%2d%5f%2d100599046&ci_gpa=pla#.UgGVWoy9KSM
You might install interesting handles on the cupboards in a charcoal color to give some contrast. Maybe not. Those cabinets don't quite look conducive to that...
Wait, here's some ideas on upgrading contractor grade cabinets similar to yours...http://www.remodelaholic.com/2013/01/update-builder-grade-cabinets/
You can get a tool to help you be uniform in making the drill holes http://www.amazon.com/LIBERTY-AN0191C-G-Q1-Cabinet-Drawer-Template/dp/B003KJJZ0Y
You could upgrade the faucets. http://www.houzz.com/photos/240633/Classic-City-Kitchen-traditional-kitchen-boston
http://www.homedepot.com/p/MOEN-Banbury-2-Handle-Kitchen-Faucet-in-Chrome-CA87000/100679039?N=ar0kZbwo5t#.UgGS24y9KSM
If there is room (without a layout or dimensions I can't be sure) open floating shelves on the side of the refrigerator closest to where you took the picture from can update it a bit...
http://www.houzz.com/photos/946058/Jill-contemporary-kitchen-portland
Better shades on the window http://www.houzz.com/photos/1073279/Spring-Parade-2012-eclectic-kitchen-grand-rapids
Something brass, definitely. I would replace with something clean, round and simple like this or like this. I'd venture to guess that the original pulls were crap, because this one looks like it had the pulls replaced too.
Edit: Another with replaced pulls.
Edit 2: After further research, the original knobs appear to actually be white plastic. Please just replace them with brass.
I also say that new flooring should be your first priority. Maybe cream and warm gray vinyl tile or plank?
I think painting your wainscoting gray would look good. You could get some specific recommendations by googling paint colors for oak cabinets, but I'd say a creamy white for your walls and a greige for the wainscot. A stark black gray would clash.
For hardware I'd say an oil rubbed bronze with bin pulls for your drawers like this
I'd do formica countertops in Calcutta marble. You can do them without the standard 4 in backsplash and do tile instead (white subway, hex, or herringbone). They would cost waay less than 2k and look great, not fancy, but more fitting with your existing cabinets.
Instead of buying a new stove and fridge you could just replace your black microwave with a white one and it wouldn't stick out as much.
Amazon has some retro satin nickle cabinet pulls which would look nice in your kitchen:https://www.amazon.com/Cosmas%C2%AE-6632SN-Nickel-Cabinet-Hardware/dp/B00FP1BBBG/ref=sr_1_8?ie=UTF8&qid=1474334920&sr=8-8&keywords=kitchen+cabinet+pulls+brushed+nickel.
Kitchen looks great, good job.
Yellow is a terrible idea. It will look dingy next to the grey-ish cabinets. I would either freshen the White on the walls or do a deeper medium grey.
Remove the curtain above the sink. Find a more modern pattern or go with white blinds with wide slats. If you want a pop of color, a solid bright yellow, blue or green would look nice in curtains.
Get faux marble appliqué for the counter tops.
(Example: Marble Wallpaper Granite Paper for Old Furniture Self Adhesive and Removable Cover Surfaces 17.71 inch x 78inch Marble Paper Peel and Stick Easy to Apply https://www.amazon.com/dp/B0777LR4ZX/ref=cm_sw_r_cp_api_i_3IFRDbYAN9Y12)
Switch out the cabinet knobs for something more modern.
(Example: Cosmas 305-030SN Satin Nickel Cabinet Hardware Euro Style Bar Handle Pull - 3" Hole Centers, 25 Pack https://www.amazon.com/dp/B01D0KWBJ4/ref=cm_sw_r_cp_api_i_UJFRDbREHKEAD)
Lol - no kidding. Too bad the distance between the two mounting holes (aka center to center) matches neither the boring nor overall width or length that is specified for the given product! Most of the amazon pulls require digging through the product reviews on a pull by pull basis because 'center to center' is used as a synonym for " the boring" and if the handle has any kind of angle, curve, or inset then those two values will not be the same. That is on the rare occasion that 'center to center' is even provided! Most of the time the title doesn't match the description. I am sure that if your hardware budget is $200 per dresser you don't have to worry about deciphering the websites I'm looking at...
This interaction has actually made me value paying more for hardware so that I don't have to stress out to figure out whether the measurements will work lol.
https://www.amazon.com/Hickory-Hardware-P3001-BI-3-Inch-Refined/dp/B000N8GV2K/ref=sr_1_9?qid=1571783128&refinements=p_n_feature_keywords_browse-bin%3A2800937011&s=hardware&sr=1-9
https://www.houzz.com/products/2-cabinet-pull-black-wrought-iron-heart-3-1-2-boring-prvw-vr~62601607
https://www.vandykes.com/flower-engraved-pull-3-boring/p/208192/
https://www.vandykes.com/restorers-primitive-bail-pull-with-curved-handle/p/205511/
https://www.vandykes.com/schaub-traditional-squared-cup-bin-pull/p/221467/
I would say white cabinets (at least the uppers) would make it appear larger. Change the backsplash to a larger tile, maybe a glossy taupe/tan or interesting non-intricate pattern, just something that is not busy. You can also exchange the current knobs/pulls for some stainless steel modern handles sort of like these. The granite, sink, stove all look updated and great, so I would say definitely base your color scheme around that.
​
ETA: I wouldn't paint the lowers white, I personally like the look of different colored uppers & lowers, but that may not be your style. I would play off the colors in your granite for the lowers, if you do go that route. Nothing too "matchy-matchy" but something to tie the lighter color on top, to the lowers, if that makes sense.
Commercial product? Kind of.
Get someone to drill holes and screw on a handle like this one:
https://www.amazon.com/AmazonBasics-Modern-Cabinet-Polished-10-Pack/dp/B01MYAGI09/ref=sr_1_9?keywords=4%22+chrome+handle&qid=1556738563&s=gateway&sr=8-9
Or this one if reverse access isn't possible (less pretty):
https://www.amazon.com/Bulk-Hardware-BH02239-Handle-Screws/dp/B00O7P0XAQ/ref=sr_1_1?keywords=4%22+front-screw+chrome+handle&qid=1556738803&s=gateway&sr=8-1
You'd probably need to go to Home Depot and buy the perfect length screws in either case.
Worrying about thousandths of an inch on wood pieces is crazy, but ideally you will set your machines up to be as precise as possible.
If you knew that you could set your table saw to a perfect 90 every time, but it would take you an extra minute every month or two, would it be worth the trouble?
The same tool can also be used on a bandsaw, drill press, miter saw, etc.
The ability to quickly check your squares is a pretty big deal though. A set of machinist 1-2-3 blocks should be in every shop. Really, it's all the precision a woodworker needs*.
I have bought squares that weren't square, or have gotten dropped or otherwise knocked out of square.
Are you just looking to cover the screw/screw holes? Or the entire strip?
If you are just looking at covering the holes, these may help:
https://www.amazon.com/Fastcap-Adhesive-Cover-Caps-White/dp/B0006NICL0
They are PVC adhesive screw caps. They are PVC so they are fine in wet areas, and just stick right on top of screw holes. I used them to cover screws in my vinyl windows, they work very well. They have their own adhesive, if you really want to get crazy with it, maybe use some caulk or silicone or something to apply them.
If you're looking to cover the whole strip, that's a different story. Could buy pvc planks or something, I used those on an outside window frame and with composite decking. They are just plain white and you can cut them with a circular saw to fit. Screw those in, then use the PVC caps for a cleaner look if you'd like...It's a pretty rough surface as-is, so it may not be pretty.
These were about $2 each. They look great, but feel very light weight. Good enough for a shop.
https://www.amazon.com/Goldenwarm-Brushed-Cupboard-Furniture-Hardware/dp/B01MAY98UY/ref=pd_sbs_60_2?_encoding=UTF8&refRID=NC4N09857CJQAB7MFY3X&th=1
Even if. You just painted the front panel, would help it blend in next to the fridge. It may look cool with a recessed handle like this.
I would recommend buying these. They are quite affordable, and you can use them for several different tasks. You can use two of them to stand materials on end for walls( hug the wall with two blocks), and you can also use their weight to glue two sheets together to build up wall or roof thickness.
I found these on amazon - they look like stickers, so might not be exactly what you had in mind, but should do the job. I know Home Depot, lowes and Ace also carry a selection of diy furniture parts in the hardware section, so you might try there.
You realize nobody really uses honing steels anymore, right? Go buy try to buy one, and see what they're called. I actually had a hard time finding an old-school honing steel on amazon.
sharpening steel
a demo actually using a sharpening steel to sharpen
I kinda fancy these 1-2-3 blocks as a pen stand, if only they made th holes wider.
Buy more of them.....
https://www.amazon.com/BL-123-Precision-Steel-1-2-3-Blocks/dp/B00092CJC6/ref=pd_ybh_a_10?_encoding=UTF8&psc=1&refRID=SA346M188EJRQA6HEZ75
https://www.amazon.com/BL-123-Precision-Steel-1-2-3-Blocks/dp/B00092CJC6