Reddit mentions: The best hubcaps, trim rings & hub accessories

Scrapyards are a good place to look around, if you're just looking for something OEM-looking and don't mind some scuffs. The really flashy stuff is aftermarket and you just have to find what you like - tirerack or something, I suppose, to start with.

W/r/t sizing, I'd probably see what factory options were first, and use that as a sizing guide. Wheel-Size.com says that the Nismo edition shipped with 18x7" rims, so if you could find those somewhere that'd be a good place to start and you'd know it'd work.

To expand your search pool a bit, check out Honda Accord wheels. They shipped a bunch with optional 18x7.5" wheels about 10-15 years ago and scrapyards are full of 'em. They use the same bolt pattern and you'll need a 2mm (64.1mm -> 66.1mm) hub-centric ring spacer for the hub. They also have a slightly wider offset which should compensate for the wider wheel and prevent rubbing.

If you get bigger wheels you'd need different tires, of course, hopefully matching the outside diameter (so your speedometer/odometer aren't off). 215/40R18 would be the closest match and would work on either a 7" or 7.5" rim. If you did have the 7.5", you could go up to a 235/40R18. Which would be pretty grippy.

Useful:

https://tiresize.com/calculator/

https://www.tyresizecalculator.com/charts/tire-width-for-a-wheel-rim-size-chart

Or you could leave it stock, because they're probably fine as-is. But what's the fun in that. ;-)

I got 17x7.5 42 offsett in charcoal grey.. They were 474 with a 100 dollar rebate/coupon for 374 total.

I was reusing the 17" nonrunflat tires i already had on the stock rims which got bent driving in the winter, so I stuck with 17.

the smaller wheels are lighter, but i thought 17 looked better on the r56 anyways.

BE AWARE you will need to buy new lug bolts, as the holes for these are deep the regular (kinda look like an acorn) lug bolts won't work since you won't be able to fit a wrench around them. Therefore you'll also need to buy spline style lug bolts.

You should also probably get a hubcentric centering rings too. They'll help with vibration at speed,but make putting the wheels on and off a lot easier.

I got new wheel covers like this for mine. There are a ton of options ranging from $25-45.

An OBDII scanner is kinda useful and you can use it with your phone to display info that the Yaris doesn't. Things like MPG, tachometer, etc.

I don't know if this will be useful but I'll throw it out there: wifi hotspot for your car for $20/month. More info here.

Cleaning your car also spruces it up too. Enjoy your Yaris!

These will help the steelies look presentable for the season.

Already thinking about Continental, Perelli or Michelin for spring/summer Serrons, lol.

Pilot Automotive WH553-16S-BS Universal Fit Spyder Wheel Cover [Set of 4] - 16 in. ABS Hub Cap with 10 Spokes, Black/Silver Finish. Car Accessories https://www.amazon.com/dp/B00V337VNC/ref=cm_sw_r_cp_apa_i_sVGLDbGTHR5JP

Amazon has these for $25 for a set of four. Pretty close to what you have. Buying a new set might be easier and cheaper than trying to track down one OEM cover, especially as it won't match cause your remaining three are probably sun faded.

TuningPros WSC-126S15 Hubcaps Wheel Skin Cover 15-Inches Silver Set of 4 https://www.amazon.com/dp/B00AQ29FWQ/ref=cm_sw_r_cp_apa_B1ZQybN0V3KR9

Ah dude nice. I’m subscribed. I work at UPS loading trailers, and your autopilot videos are easy to listen to with my headphones in while working.

I have no Tesla, so I’d have to try on my leaf lol. I’ve also seen full moon hubcaps . These as well most people would think are ugly, but could possibly give just a bit more efficiency to the aerodynamics of the car

I used this one and worked pretty good

Upgrade Your Auto Wheel Bands Red in Black Pinstripe Rim Edge Trim for Tesla S https://www.amazon.com/dp/B01AGYUQTE/ref=cm_sw_r_cp_api_i_lpbBDb0YAY1YN

the steelies look better with the hub caps off to me. I have seen a chrome lip for steel wheels https://www.amazon.com/Chrome-Plated-Stainless-Steel-Rings/dp/B00GIA297I

What do you think about that addition to separate the rims from the tires? Do you think it would be too much? Nice car.

Cover Trend (Set of 4) Black Matte Aftermarket 16" Inch Hubcaps fits Nissan Altima, Quest - Replica Snap-On Wheel Covers https://www.amazon.com/dp/B072R1NX85/ref=cm_sw_r_cp_apa_WqI4BbNR6F34P

I put these $35 caps on my altima and it made the car look incredibly sporty while keeping the oem look. I got many compliments from my friends and my gf and only really up close can you tell they're not real wheels. They also kind of resemble the stock hubcaps so I'd recommend these to op.

Oh interesting. I thought you were talking about something like this

I haven't used these myself, but I have read a couple good reviews on them. If she hits the curb a lot, you should probably buy a couple spare sets!

these: https://www.amazon.com/gp/product/B01AGYUQTE

I never said they do look better, just that steel is a stronger metal, and as a result of that could be cut into narrower and more interesting designs than aluminum could.

They typically look like what is in the OPs instance, but they can look much better and custom work could be whatever you wanted.

There just pop on wheel covers but there good quality.

Alpena 58259 VR Carbon Wheel Cover Kit - Black - 15-Inch - Pack of 4 https://www.amazon.com/dp/B00TO7MXG4/ref=cm_sw_r_cp_apap_ltgCzVNpuf4j1

I will say, those look like generic versions of the Honda Accord hubcap,

https://www.amazon.com/Hub-Caps-Select-Accord-Silver-Covers/dp/B014LAETG0

Assuming you mean the standard hubcaps that come with the car and not an expensive set of rims, they are probably just falling off.

I have a 2011 Camry and have watched the hubcaps roll off while I was driving. Stop spending $100 on replacements. Spend $30 on a set of 4 instead (but make sure to get the ones for a 2012). They aren’t a perfect match but they are close enough.

> They are also wayyyy nicer than that 25$ shit you just linked to so gtfo....

What I linked were OE replacements for 05-07 models, meaning they're the same design, same material, and same finish as what were on the car from the factory. Maybe you have a newer Corolla with a different design? They're probably a lot more expensive in that case.....like $30.

Besides all that, it's a damn Corolla, who cares what the plastic wheel covers look like or if they're even present.

Do you have Amazon Prime?

https://www.amazon.com/Drive-Accessories-KT-1017-15S-Nissan-Replica/dp/B003CEJXGI/ref=sr_1_1?s=automotive&rps=1&ie=UTF8&qid=1491249308&sr=1-1&keywords=nissan+versa&refinements=p_85%3A2470955011

I just used flat black krylon 2 in 1 spray paint from Walmart, two bottles only. Rustloeum makes good spray paint specifically for wheels but I think that's online only.

Hubcaps you'll need to know your size. I got them after seeing another user on here with it.

Alpena 58259 VR Carbon Wheel Cover Kit - Black - 15-Inch - Pack of 4 https://www.amazon.com/dp/B00TO7MXG4/ref=cm_sw_r_cp_apa_m4DVAbWW0C5EH

I got them off of Amazon for $25 cause I had lost one of my original ones.
https://www.amazon.com/dp/B014GF4HNA?ref=yo_pop_ma_swf

It's a plastic trim piece. Maybe this one https://www.amazon.com/Genuine-GM-9596923-Wheel-Cover/dp/B00GU7H4NS

Buy a new one and go on with your life

bought these instead

http://www.amazon.com/gp/product/B00TO7MXG4?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

https://www.amazon.com/Circuit-Performance-Plastic-Polycarbonate-Centric/dp/B01JN0MW26/ref=sr_1_3?ie=UTF8&qid=1520884637&sr=8-3&keywords=63.4+rings

https://www.amazon.com/Circuit-Performance-Plastic-Polycarbonate-Centric/dp/B01JN0N3ME/ref=aw_pd_cart_vw_crc_4_11?_encoding=UTF8&pd_rd_i=B01JN0N3ME&pd_rd_r=P1VG21MWCK5APH87JDXT&pd_rd_w=siFib&pd_rd_wg=Tyha6&pf_rd_p=07e3c3d9-94c9-405b-8d35-f3de6d5ea62c&pf_rd_r=P1VG21MWCK5APH87JDXT&psc=1&refRID=TG286QEW45FYJ0FAJ48P

Would probably look better than it is now, but if you plan on buying those you need hubcentric rings to avoid vibration. The centerbore of those wheels is a tad different than the civic.

These will work