#96 in Tools & Home Improvement
Use arrows to jump to the previous/next product
Reddit mentions of LE Power Adapter, UL Listed, 3A, 120V AC to 12V DC Transformer, 36W Power Supply, US Plug Power Converter for LED Strip Light and More
Sentiment score: 18
Reddit mentions: 49
We found 49 Reddit mentions of LE Power Adapter, UL Listed, 3A, 120V AC to 12V DC Transformer, 36W Power Supply, US Plug Power Converter for LED Strip Light and More. Here are the top ones.
Buying options
View on Amazon.comor
- Input Voltage: 100-240 V AC. DC Port Diameter:Φ5.5*2.1*10mm.
- Output Voltage: 12 V DC. It works with Lighting EVER LED strip lights.
- Max Current: 3A. Length of AC Cord: 3.94ft/1.2m. Length of Output Cord: 3.94ft/1.2m.
- Application: Low voltage single color or RGB LED strip lights.
- US Plug: UL Listed. Pack of 1.
Features:
Specs:
Color | Black |
Height | 2.9 Inches |
Length | 7.87 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 0.440924524 Pounds |
Width | 3.46 Inches |
Just got a new safe for xmas, hated the lighting in it so got started on a DIY lighting project. Spent 20 minutes and $24, its pressure sensitive and lights up all compartments.
Edit: The Safe is a Mesa
My Lighting setup:
I'll link the full order:
I am
not 100%happy with the light strip I got.They are super sensitive to the power draw and flickers time to time(maybe it's the power adapter =/). Though, it's cheap and does its job pretty well![EDIT] correcting the led power connect as opinted out by /u/BishoujoReview
[EDIT] flickering was due to an old extension cord. I plugged the power adapter directly to the wall outlet and that solved the problem.
LED strip lights are a great and cheap way to light up a mirror! This is a picture of my current vanity setup: http://imgur.com/HODyWkh
The whole setup should run you under $25 on amazon:
http://smile.amazon.com/Flexible-Lights-Daylight-Non-waterproof-Lighting/dp/B00HSF65MC?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
http://smile.amazon.com/HitLights-Light-Connector-Extension-Single/dp/B00L1MFRY0?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00 (click the '10-pk gapless connectors' on that link)
http://smile.amazon.com/Power-Adapter-Transformers-Supply-Strip/dp/B00DKSI0S8?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00
ac adaptor
right angle connectors
LED strips
Container: Rubbermaid 20 gal Brute Bin
Lights: Kingbrite 60 W Quantum Board (if you want dimmable, ask for a dimmable driver like the HLG-60H-36B and a potentiometer)
Screws: You'll need lots of nuts, long screws, washers, and spacers to mount the board and PSU. First put the board on the lid and mark where to drill, then drill holes. Then put the power supply on the outside in the middle, mark and drill those hoses. Mount power supply and then flip lid over and mount the light, using long screws and nuts to hold it in place (the light should NOT touch the lid but be 1-2 inches from it, held in place by nuts). Drill small hole for power line, then connect. Finally, drill 3 inch hole for exhaust beside the light. You'll also need long screws with nuts to keep the fan and shrouds together. Be sure to use spaces anywhere the screw heads or nuts are touching the lid or the lights. For light spacers, I used rubber spaces between the nuts.
Cooling shrouds: 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose
90 degree 4 inch elbow for exhaust: 4 in. 90° Round Adjustable Elbow
4" to 3" reducer for exhaust: 4 in. to 3 in. Round Reducer
2x regular JB Weld to mount the reducer and 3 inch "trunk"
Fan: Delta AFB1212SHE-PWM 120mm x 38mm 4pin PWM+Tac Sensor Extreme Hi-speed 3700 RPM 151 CFM
Fan controller: Noctua NA-FC1 4-pin PWM Fan Controller
Fan power supply: LE Power Adapter, UL Listed, 3A, 120V AC to 12V DC Transformer, 36W Power Supply
Fan power supply adapter: CRJ Female DC Power Supply Plug to 12V Molex Power Adapter Cable
Fan molex adapter: Coolerguys Mini 3-4 pin Fan Adapter (Single)
2x ABS fan elbow (for "snout" intake): 3 in. ABS DWV 90-Degree Hub x Hub Long-Turn Elbow
Air filter for intake: 16.25 in. x 12.5 in. x 0.19 in. - 16.3 in. x .2 in. x 12.5 in. - CF300 Carbon Filter
Air filter (not pictured): VIVOSUN 4 Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan
Fan hose (not pictured): iPower GLDUCT4X8C 4 inch 8 feet Non-Insulated Flex Air Aluminum Foil
Watering device (not pictured): Janolia Automatic Irrigation Kit, Self Watering System, with Electronic Water Timer
Camera (not pictured): Wyze Cam 1080p HD Indoor Wireless Smart Home Camera with Night Vision (glue steel piece for magnetic base onto the upper side of the bin)
Notes: This design is very safe because it keeps all electronic components high in the bin. At the same time, using a battery powered watering system keeps you from requiring to ever open it. The lamp runs very cool. The PWM fan controller works well and keeping the air moving without using a lot of power (do NOT buy a cheap voltage modulator, I did first and it doesn't work nearly as well as the PWM controller). The Wyze cam is super cheap and lets you keep an eye on everything or make timelapses. Have fun growing your tomatoes!
Thanks! I purchased all the LED parts from Amazon. Here are the links.
LED Strip: http://www.amazon.com/gp/product/B00JQV6NNC
Power Supply: http://www.amazon.com/gp/product/B00DKSI0S8
Dimmer: http://www.amazon.com/gp/product/B00JQ437YM
The LED Strip can be cut every three lights, so you can make it whatever length you want. I have a ton of it left over. For the dimmer I just cut the power cord a few inches after the adaptor and wired it into the terminal block.
LEDs: https://www.amazon.com/gp/product/B00HSF65MC/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Power Brick: https://www.amazon.com/gp/product/B00DKSI0S8/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
You can cut the LED strip and then re-solder them together. I used these wires for that: https://www.amazon.com/gp/product/B00QTCBZ4I/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
i bought these LED strip lights, which can be cut down to whatever length, and this power supply. i also bought some extra wire and connectors so i could run one long strip of LED lights through all four enclosures. worked around the adhesive issue by hot gluing the fuck out of them. i scratched up a line about two inches away from the front wall, to create some texture for the hot glue to grab, and allowed some extra glue to sort of wrap around the strip and prevent the strip from being peeled away from the glue.
Based on the specifications of that monitor, it requires a 7-18V DC power adapter. Within that range, you can get at 12V DC adapter for cheap and they're very common and generic. The amperage required by the monitor is less than 1A, so a this power adapter will work fine. Within the specifications of your monitor, and not expensive.
https://www.amazon.com/Flexible-Non-waterproof-Christmas-Decoration-Daylight/dp/B00HSF65MC/ref=sr_1_3?ie=UTF8&qid=1526496163&sr=8-3&keywords=led+strip+lights
get this!
youre also gonna need this
https://www.amazon.com/Adapter-Transformers-Supply-Output-Listed/dp/B00DKSI0S8/ref=pd_bxgy_60_img_2?_encoding=UTF8&pd_rd_i=B00DKSI0S8&pd_rd_r=G8HHS4XR6MNMHDCCSNZV&pd_rd_w=RgFLj&pd_rd_wg=qhiRw&psc=1&refRID=G8HHS4XR6MNMHDCCSNZV
I bought these after a suggestion from another person on this forum. I didn't think they would work, but WOW, it made a huge difference. Brightened my area unbelievably good. First link is the LED lights. Second link is the adapter to be able to plug it in.
I just wrapped mine around the inside of my window.
LE 16.4ft LED Flexible Strip Lights, 300 Units SMD 3528 LEDs, 12V DC Non-waterproof, Light Strips, LED ribbon, DIY Christmas Holiday Home Kitchen Car Bar Indoor Party Decoration (Daylight White) https://www.amazon.com/dp/B00HSF65MC/ref=cm_sw_r_cp_tai_r-dzybVRAW2Y5
LE Power Adapter, Transformers, Power Supply For LED Strip, Output 12V DC, 3A Max, 36 Watt Max, UL Listed https://www.amazon.com/dp/B00DKSI0S8/ref=cm_sw_r_cp_tai_ObezybTYECE37
Given that is looks like mine, I'm going to assume they are:
https://www.amazon.com/gp/product/B00HSF66JO/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
https://www.amazon.com/Adapter-Transformers-Supply-Output-Listed/dp/B00DKSI0S8/ref=pd_bxgy_60_img_2?_encoding=UTF8&pd_rd_i=B00DKSI0S8&pd_rd_r=ET8Y5X5FM7Q06TP33QBH&pd_rd_w=Xw11o&pd_rd_wg=ZQTfN&psc=1&refRID=ET8Y5X5FM7Q06TP33QBH
To install: https://www.reddit.com/r/AnimeFigures/comments/7psgup/dioder_alternatives/dsjy59n/ (Follow the pictures in the chain)
Thanks so much! I highly recommend these LED strips. They're paper thin so they bend easily at the corners of a detolf. You'll need this adapter for the power.
My only complaint about them is that they're a little too bright at first. You get used to them though! You can't beat this nice even white lighting and the ease of installation.
Sure first here's the LED strips, Power Adapters, and Dimmer. Looks like they've gone up in price a bit since I did it but it's still not too bad. I didn't take any in progress pictures so I'll just have to describe how setup went. The LED strips come with a sticky back side so I just stuck that to the poles on the front side of the Detolf. I used 1 LED strip, 1 dimmer, and 1 power adapter per 2 Detolfs but you could also use 1 strip per Detolf. This will give you more even lighting, and the power adapter should still be able to handle powering 2 fine, you'd just need to also buy a connector for the 2 strips. After you've got the stuff its as simple as just taping on the stip in a |‾| running from the outside poles and across the top of the Detolf, running the power cord outside of it through the gap in the door, and the plugging in the dimmer.
So basically I used a 16" wire wreath frame and wrapped tin foil around it to reflect the light better, and stuck on the LED Lights! They don't come with a power adapter so I bought this one.
I think yours has the double doors? I had a 16-18 gun cabinet with a single door. The door was the perfect width for this Molle seat back panel. I had to cut a corner for the lock mechanism and had it sewed by a local custom leather shop. Then I drilled and used rivets to attach it to the door. I have another cabinet that I added plywood shelves to. I just used double stick tape to stick plywood to the sides, then put a shelf on top, then stick on 2 more sides, then another shelf and repeat.
It sounds like you're going overboard on lighting. I just outfitted my new
saferesidential security cabinet with LED strips. The safe is 40" wide, 72" tall and 25" deep. I bought this two-pack of LED strips and this power adapter and a this 5-way power splitter. I installed one full strip minus 6 inches around the perimeter of the door, and I didn't need any more. I added a loop around the sides and top at the back of the safe only because I had a second strip of LEDs, not because it was necessary.Edit: I know it's impossible to judge brightness in a photo, but here's two I took of my safe. The single strip of LEDs facing away from the door provide sufficient light. The LEDs around the back edge add a ton of light, but the glare from looking at the LEDs cancels out a lot of the added brightness.
Are you talking about the power supply for the Charsoon charger in the UAVFutures video? If so I also had the issue you have (as well as another issue where it killed one of my batteries by not balancing properly) I bought this power supply to replace the cheapo one it came with : https://www.amazon.com/gp/product/B00DKSI0S8/
I pretty much immediately upgraded to an iCharger 106b+ though and only use the Charsoon as a battery tester. It's much nicer having something that can parallel charge and discharge as well as be more reliable to not kill my batteries.
Ive seen these recommended quite a bit. They're what I use in the vivs I built. They do come with adhesive backing but it sucks and being a bad idea anyway, I just siliconed mine in place. But I built them up and had everything in place long before my snakes were put in them.
You won't need the whole strip for an enclosure for a BP, especially being they like darker anyway (so Ive heard). The one linked is also the warmer color option and is less harsh and blue than the others. I use the 3000K, as the 6500K were just WAY too bright in my opinion. They were cheap enough for me to get both and try them in the enclosures, and I would suggest the 3000k.
If you cant relocate your snake for a day or two in order to use silicone, hot glue might hold them in place well too.
I used this power supply to go with them and put them on a day/night timer and they've been perfect.
This: https://www.amazon.ca/gp/product/B00HSF65MC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
With this: https://www.amazon.ca/gp/product/B00DKSI0S8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Canadian links, but they have them in other countries.
Very simple to setup - I just put it right next to the rods in the Detolf and went up and around.
This is the one they sell for it, I don't think I'd have anything appropriate on hand. But thanks :)
I ordered 2 of these to fill my 10' x 10' playspace https://www.amazon.com/gp/aw/d/B017HQVOP4/ref=yo_ii_img?ie=UTF8&psc=1
I ordered 5 boxes of these to attach them. 1 in each corner, and 1 in the middle of each tile. https://www.amazon.com/gp/aw/d/B001PLOM8Y/ref=yo_ii_img?ie=UTF8&psc=1
I angled the pins so that they went all the way in and are sturdier.
For the lights it took 2.5 spools of this https://www.amazon.com/gp/aw/d/B00HSF64E6/ref=ya_aw_od_pi?ie=UTF8&psc=1
Also an adapter https://www.amazon.com/gp/aw/d/B00DKSI0S8/ref=ya_aw_od_pi?ie=UTF8&psc=1
And a remote to power it all on/off without having to plug it in over and over. https://www.amazon.com/gp/aw/d/B00MHKCTLE/ref=ya_st_dp_summary
https://www.amazon.com/SoulBay-Universal-Switching-Selectable-Electronics/dp/B01N7RS0NG/ref=sr_1_fkmr0_2?ie=UTF8&qid=1506451136&sr=8-2-fkmr0&keywords=ac%2Fdc+power+adapter+12v+27w
This would get you very close, it's slightly under powered. Do you have the specs on what the adapter is powering?
This one would also work, but it could supply too much amperage if the device is shorting or having other electrical issues.
https://www.amazon.com/Adapter-Transformers-Supply-Output-Listed/dp/B00DKSI0S8/ref=sr_1_1?s=electronics&ie=UTF8&qid=1506451264&sr=1-1&keywords=ac%2Fdc+power+adapter+12v+3a
Edit: Either way, you could replace the end with the one from your adapter if they do not fit, assuming you know how to crimp or preferably solder and shrink tube.
Yes, standard 12v 3A with proper polarity from a reputable brand should work just fine.
/u/MattAces posted this one in a previous thread, I haven't confirmed this one would work or not, though.
https://www.amazon.com/dp/B00DKSI0S8/ref=cm_sw_r_cp_api_3owhybBPVHBRM
AC Adapter
You don’t need to match the 2A input. You just need it to take in AC power and and put out 12V 3A. This is what I got and no issues with it: https://www.amazon.com/dp/B00DKSI0S8/
The cord on that is almost 4ft. I don’t quite need a 6 ft cord because my EO is mounted right above an outlet that’s hidden by furniture.
12V DC, 3A Max, 36 Watt Max, UL Listed https://www.amazon.com/dp/B00DKSI0S8/ref=cm_sw_r_cp_api_3owhybBPVHBRM
OP could also use the Viltrox with an AC adapter to run on a power bank with an AC outlet like this one. The 24,000 mAh one would probably run a Viltrox for 10 hours, and the 40,200 mAh version would almost certainly well exceed that.
EDIT: Based on reviews, this one would probably be better.
Ok, so I'm about to embark on this project. I want to put the Hue strips behind my TV, but I need 2 strips, which is expensive and cumbersome. Here's what I've been able to find...
I purchased some item from Amazon. Here's what I got:
16 foot roll of RGB LED's: http://www.amazon.com/dp/B008YRT9IK/
12v RGB LED Power Amplifier: http://www.amazon.com/dp/B0081CZJGO/
12v Power Supply for LED Strip: http://www.amazon.com/dp/B00DKSI0S8/
Here's what I plan on doing. I cut off the LED strips AFTER the Philips controller. That should leave 4 wires, the R, G, B and V+ wires. I connect that to the RGB Amplifier. I them connect the amplifier to the RGB strip and voila, everything should work, in theory. I haven't completed this project yet, I just got the items today. I plan on recording a video assembling everything together. There's a few videos on YouTube showing this as well, but they're vague. Hope this post helps!
They provide enough light but aren't super bright, I do have the option of putting another strip across (I only used half) to make it brighter but 1 should be enough. You can't beat the price: LEDs and Power Source . I originally was going to hold them up by zip ties, but the backing is sticky enough to stay on the wire shelf. I'm not sure how well it will stand up in the future but for now it's great.
Sorry, was asleeping. LED strip here
Power supply: here
I got [these lights] (https://www.amazon.com/gp/product/B00HSF65MC/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1) with [this power adapter] (https://www.amazon.com/gp/product/B00DKSI0S8/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1) from Amazon. The lights are sticky on the back. What I did was run it up the front corner on the left, across the top, and down the front corner on the right. It does a pretty decent job of lighting everything up. I can take a picture when I get home if you like.
Thanks! I got one from Amazon but it doesn't look like it's the right size as my Gledopto controller. Can you help?
This is the one I got: https://www.amazon.com/gp/product/B00DKSI0S8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Oops, I replied to the wrong comment. The cathodes are inside the case, the LED lights are Here and
here.
A lot of the $30 - $50 mirrors that are readily available at Walmart, Target etc. are really not that great. They're better than nothing, but that's about it. If she's as into makeup as you say she is, she's going to want something properly bright. If you're looking for a makeup mirror with lights built in already, you're going to have to invest around $80 - $100. Instead, if she already has a mirror, you can just add LED lights around the perimeter, and it works better than most makeup mirrors. Definitely better than the $30-$50 ones.
Here's what I use: this LED strip + this power adaptor. It's super easy to install if she already has a mirror, and it is BRIGHT. It's cheap (around $40CAD), and SUPER functional. I can't recommend it enough. You can probably even get a different adaptor with a switch/dimmer.
I would get this one.
https://www.amazon.com/gp/aw/d/B00DKSI0S8/ref=mp_s_a_1_3?ie=UTF8&qid=1519091480&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=12v+3a&dpPl=1&dpID=41kaSAMcYWL&ref=plSrch
The connector on the one you listed is different.
https://www.amazon.com/Adapter-Transformers-Supply-Output-Listed/dp/B00DKSI0S8/ref=pd_lpo_sbs_23_t_0?_encoding=UTF8&psc=1&refRID=T60MPKWVX3N790BZGRP6 Would this work?
http://www.amazon.com/Power-Adaptor-Transformers-Supply-Strip/dp/B00DKSI0S8
phone chargers are typically 5v, not 12v. Anything with a 12v >250mA output would work, so it just depends what you have laying around. Or you can get something off amazon for maybe 10 bucks at most. such as http://www.amazon.com/Power-Adaptor-Transformers-Supply-Strip/dp/B00DKSI0S8/ref=sr_1_3?ie=UTF8&qid=1453144942&sr=8-3&keywords=led+power+supply
This is the one I already bought. Can I just get an adapter for this? LE Power Adapter, Transformers, Power Supply For LED Strip, Output 12V DC, 3A Max, 36 Watt Max, UL Listed https://www.amazon.com/dp/B00DKSI0S8/ref=cm_sw_r_cp_api_n-iVAb127J24S
I went to amazon and ordered these lights and this adaptor. I haven't gotten them in yet, but I'll let you know what I think of them when they do. They seem pretty straight forward but you never know with these kind of things haha.
As for preference of white vs warm (yellow), I used christmas lights and a white fluorescent lamp as different backlighting to see which I liked more. I picked the white because I felt it had a more mysterious/ night time feel (just my opinion haha), but all the Hari and Deepti ones use yellow light so it's all up to personal preference. Post pictures of yours when you finish! I'd love to see how it turns out! :)
The product page says a 24w power consumption, so aiming for a 36w or larger power supply would be a good idea, something like this would work just fine.
If it's AC adapter, I think it uses a pretty generic one, you should be able to find it.
https://www.amazon.com/dp/B00DKSI0S8/ref=cm_sw_r_cp_api_3owhybBPVHBRM
Yes you'll need a power supply. If you were to buy this LED tape it comes with one, just cut the barrel connector off, strip the two leads, and connect them to the DMX decoder inputs. Then toss the remote and IR sensor in the garbage.
Or you could buy them on their own. Try not to go too cheap with them. The build you linked to uses a switch mode driver/transformer. They have surge protection and can switch between input voltage but I've found they can make a squealing sound when running.
LED light strips come in 16ft portions and you can cut them to whatever size you want. They are also very cheap!
LED STRIP HERE
110VAC to 12VDC ADAPTER HERE
they plug right in and are super cheap to replace.
I mounted these above my workbench, they're super brightL
http://www.amazon.com/Flexible-Lights-Daylight-Lumens-Non-waterproof/dp/B00JQV6Q4I
and then you just need a power adapter:
http://www.amazon.com/Power-Adapter-Transformers-Supply-Strip/dp/B00DKSI0S8
I mounted them facing down, behind a piece of wood so i see the lights directly.
http://www.amazon.com/Power-Adapter-Transformers-Supply-Strip/dp/B00DKSI0S8?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
LE 16.4ft LED Flexible Light Strip, 300 Units SMD 2835 LEDs, 12V DC Non-waterproof, Light Strips, LED ribbon, DIY Christmas Holiday Home Kitchen Car Bar Indoor Party Decoration (Daylight White) https://www.amazon.com/dp/B00HSF65MC/ref=cm_sw_r_cp_api_RZ4dAbA6SN1AR
And
LE Power Adapter, Transformers, Power Supply For LED Strip, Output 12V DC, 3A Max, 36 Watt Max, UL Listed https://www.amazon.com/dp/B00DKSI0S8/ref=cm_sw_r_cp_api_f04dAbKTW24T6
I've used a 12V power supply for a motorized curtain project. Something like this should suffice depending on your motor (though if you're using a motor that draws too much current for that power supply it's probably way overpowered). You can run the arduino off of it too, just run the 12V to Vin and ground to ground. You could also use something like this to control the motor, might be easier than making a circuit out of transistors.
I used one very similar to this and it worked fine.
https://www.amazon.com/Adapter-Transformers-Supply-Output-Listed/dp/B00DKSI0S8/ref=sr_1_3?ie=UTF8&qid=1519684388&sr=8-3&keywords=12v+3a+power+supply&dpID=41kaSAMcYWL&preST=_SY300_QL70_&dpSrc=srch