Reddit mentions: The best routers
We found 227 Reddit comments discussing the best routers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 60 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Bosch 1617EVSPK Wood Router Tool Combo Kit - 2.25 Horsepower Plunge Router & Fixed Base Router Kit with a Variable Speed 12 Amp Motor
- VERSATILE: kit can be used for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting, making it one of the most widely used routers for wood working
- DURABILITY: aluminum construction makes this one of our most durable wood routers yet with wooden handles on a fixed base and a soft grip handle on a plunge base
- EASE OF USE: rounded hardwood handles maximize user control; microfine bit-depth adjustment
- CONVENIENT: with the built-in constant response circuitry, our 1617EVSPK wood router will maintain a constant speed throughout the cut, so you get cleaner, more accurate results
- 12 AMP MOTOR AND ADJUSTABLE SPEED DIAL: user can set the optimal speed (8,000-25,000 RPM) for more or less power
- INCLUDES: plunge base, fixed base, 1/4 inch and 1/2 inch collet chucks, shaft wrench, collet nut wrench, chip shields and carrying case
Features:
Specs:
Height | 11.6 Inches |
Length | 6 Inches |
Number of items | 1 |
Weight | 18.2 Pounds |
Width | 11.5 Inches |
2. DEWALT Router Fixed/Plunge Base Kit, Variable Speed, 12-Amp, 2-1/4-HP (DW618PK)
2-1/4 hp, 12-amp electronic variable speed motor provides the power to rout smoothly through the toughest hardwoodsComes with 1/4-inch and 1/2-inch collets for improved versatility and bit retentionDepth adjustment ring provides precise depth adjustments in 1/64-inch increments and adjusts verticall...
Specs:
Height | 9.13 Inches |
Length | 15.88 Inches |
Number of items | 1 |
Width | 24 Inches |
3. DEWALT Router Fixed/Plunge Base Kit, Variable Speed, 1.25-HP Max Torque (DWP611PK)
- Durable 1.25HP motor of DEWALT router delivers the power to meet the toughest applications
- Variable speed control feature of DEWALT plunge router enables bit speed to be optimized for changing applications
- Soft-starting motor features full-time electronic feedback that maintains motor speed through the cut
- Dual LED's and clear sub-base ensure maximum visibility in operation
- Adjustment ring enables controlled bit depth changes to within 1/64-inch (fixed base only)
- Plunge base incorporates fine-tune adjustment rod for precise depth setting
- Large, low-pressure spindle lock button allows for comfortable, single wrench bit changes
- Multiple shaft-lock detents enable quick and simple bit changes
- Depth ring and clamping mechanism combine to ensure motor remains locked in position (fixed base only)
- Spring-loaded release tabs allow for quick base removal (fixed base only)
Features:
Specs:
Color | multi |
Height | 6.70078739474 Inches |
Length | 19.2519684843 Inches |
Number of items | 1 |
Size | full size |
Weight | 8 pounds |
Width | 10.25196849348 Inches |
4. Bosch Colt Palm Grip PR20EVSK 5.6 Amp 1-Horsepower Fixed-Base Variable-Speed Router with Edge Guide
- POWER: Variable-speed palm-grip router kit with soft-start and quick-lock systems
- TOUGH: Fixed base router with a 5.6 AMP motor with 15,000 - 35,000 rpm; depth adjustment system and finger support pockets
- DURABILITY: This Bosch router edge guide offers a rugged aluminum fixed base that's durable, solid, and reliable. Case Type: Hard plastic
- CONVENIENT: Includes palm router and Bosch router accessories (drop-forged collet and shaft wrenches, collet, fixed base, straight-edge guide, case)
- DEPENDABLE: This wood router packs big power in a small, compact package (weighs 11.8 pounds). Includes a one-year warranty
Features:
Specs:
Color | Blue |
Height | 8 Inches |
Length | 15 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 1.03 Pounds |
Width | 13 Inches |
5. Dremel 335-01 Rotary Tool Plunge Router Attachment – Perfect for Wood
Fits model 275, 285, 395, 398; 100, 200, 300 and 400 Series; 3000, 4000, 4200, 8200 and 8220Quickly converts rotary tool to plunge router; plunge lock-in handle; 2 depth stops for rapid depth adjustmentsPlastic and metal constructionIncludes plunge router attachment, edge guide, circle cutting guide...
Specs:
Color | Black |
Height | 5.2 Inches |
Length | 9.5 Inches |
Number of items | 1 |
Size | Medium |
Weight | 2.2 Pounds |
Width | 6 Inches |
6. PORTER-CABLE Router, Fixed/Plunge Base Kit, 12-Amp, 2-1/4-HP (895PK)
Soft-starting 12-amp motor features full-time electronic feedback that maintains motor speed through the toughest applicationsVariable-speed control feature (10,000-23,000 rpm) enables bit speed to be optimized for changing applicationsPlunge base features machined brass bushings and steel guide rod...
Specs:
Color | Gray |
Height | 12.2 Inches |
Length | 9 Inches |
Number of items | 1 |
Weight | 14 Pounds |
Width | 6 Inches |
7. PORTER-CABLE Router, Fixed Base, 5-Speed, 3-1/4-HP (7518)
- Precision machined aluminum motor housing and base; Dust-sealed switch and sealed ball bearing construction enhance tool durability
Features:
Specs:
Color | Gray |
Height | 9.5 Inches |
Length | 13.5 Inches |
Number of items | 1 |
Weight | 14.5 Pounds |
Width | 11.25 Inches |
8. Bosch MRC23EVSK Combination Router - 15 Amp 2.3 Horsepower Corded Variable Speed Combination Plunge & Fixed-Base Router Kit with Hard Case
Precision: trigger control system located in handle for enhanced controlAdjustable: variable speed dial for matching speed to work piece and taskSpeed: both routers feature fast, 2.3 HP, soft star motors; Variable speed dials let you set the speed you need for the jobPower: power through tough routi...
Specs:
Height | 9.75 Inches |
Length | 22.7 Inches |
Number of items | 1 |
Weight | 25.8 Pounds |
Width | 15.25 Inches |
9. DEWALT Router, Fixed Base, Variable Speed, 1-1/4-HP Max Torque (DWP611)
- Imported from: Mexico
- POWER TOOLS
- Commercial Brand: DEWALT
Features:
Specs:
Color | Yellow |
Height | 1 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | full size |
Weight | 5.5 Pounds |
Width | 1 Inches |
10. Hitachi KM12VC 2-1/4 Peak HP Variable Speed Fixed/Plunge Base Router Kit
- Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
- 11 Amp motor (2 1/4 Peak Horsepower), for precise, controlled cuts
- 2 stage motor release clamp, for quick and accurate depth adjustments and base changes
- Electronic speed control, maintains constant RPMs even as load varies
- Class leading noise level, only 79.5dB for a quieter workshop
- Includes: 1/2 inches Collet Chuck (323293), 1/4 inches Collet Chuck (323293), Template Guide Adapter (323272), Centering Gauge (323296), 16 millimeter Wrench (323294), 23 millimeter Wrench (323295), 4 millimeter Hex Bar Wrench (944458), Sub Base Plate (323297), Hex Socket HD Bolt M5x10 (10pcs) (949819), Case (323358)
Features:
Specs:
Color | Green |
Height | 16 Inches |
Length | 4 Inches |
Number of items | 1 |
Weight | 9.9 pounds |
Width | 22.2 Inches |
11. DEWALT Router, Fixed/Plunge Base Combo Kit, 11-Amp, 1-3/4 HP, (DW616PK)
1-3/4 maximum horsepower, 11-amp motor provides power to rout smoothly through the toughest hardwoodsMicro-fine depth adjustment ring provides precise depth adjustments in 1/64-inch increments and adjusts verticallyAdjustable, tool-free steel motor cam lock makes depth adjustment and base changes qu...
Specs:
Color | Multi |
Height | 9.13 Inches |
Length | 15.88 Inches |
Number of items | 1 |
Size | One Size |
Weight | 6 pounds |
Width | 24 Inches |
12. Makita RT0701CX7 1-1/4 HP Compact Router Kit
Variable speed control dial (10,000 to 30,000 RPM) enables user to match the speed to the applicationSmooth rack and pinion fine depth adjustment system for more precise settingsSlim and ergonomically designed body for increased comfort and controlQuick release cam lock system for easy depth adjustm...
Specs:
Color | Factory |
Height | 7 Inches |
Length | 17 Inches |
Number of items | 1 |
Size | One Size |
Weight | 3.9 Pounds |
Width | 10 Inches |
13. Bosch 1617EVS 2.25 HP Electronic Fixed-Base Router
12 Amp router motor - Combines ample power with adjustable speed settings, allowing users to glide along cutlinesAdjustable speed dial (8000-25,000 RPM). 2 inch sub-base openingFixed base has threaded holes for mounting to router table positioned in common 3-hole patternNow includes RA1161 fixed-bas...
Specs:
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Weight | 11.0231131 Pounds |
Width | 0 Inches |
14. Triton MOF001C 2-1/4-Horsepower Precision Router Kit
- Micro winder enables continuous fine depth adjustment through full plunge range.
- Push button plunge conversion activates conventional plunge mode.
- Easy set, direct reading 3 stage turret for precise preset cut depths.
- Soft start and variable speed (with maintenance under load) provides the perfect speed for all cutter types.
- Multi function fence: Extended base for greater stability. Full fence adjustment for trenching. Built in circle cutter.
Features:
Specs:
Number of items | 1 |
Weight | 16.3 Pounds |
15. Milwaukee 5616-24 2-1/4 Max-Horsepower EVS Multi-Base Router Kit Includes Plunge Base and BodyGrip Fixed Base
The product is easy to useThe product is durableThe product is manufactured in ChinaPrecise macro/micro depth adjustment systemto 1/64 increment, 3 metal depth scale and adjustable pointerPremium plunge system with four-point Oil Impregnated PM Bushing design6-Position(1/8 increment) adjustable meta...
16. Hitachi M12VC 2-1/4 Peak HP Variable Speed Fixed Base Router
Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.11 Amp motor (2-1/4 Peak Horsepower), for precise, controlled cuts2-stage motor release clamp, for quick and accurate depth adjustments and base changesNickel plated motor housing, for smooth depth adjustmentsElect...
Specs:
Color | Green |
Height | 10.9 Inches |
Length | 4 Inches |
Number of items | 1 |
Weight | 7.3 Pounds |
Width | 8.6 Inches |
17. Triton TRA001 3-1/4 HP Dual Mode Precision Plunge Router
Single button switches from conventional plunge to fixed-base router with rack and pinion modeThrough base, single wrench bit change is achieved with automatic spindle lockMicro winder enables continuous fine depth adjustment through the full plunge modeSoft start and variable speed provides the per...
Specs:
Height | 11.4 Inches |
Length | 10.2 Inches |
Number of items | 1 |
Weight | 19.5 Pounds |
Width | 12.9 Inches |
18. Makita RT0701C 1-1/4 HP Compact Router
- Variable speed control dial (10,000 to 30,000 RPM) enables user to match the speed to the application
- Smooth rack and pinion fine depth adjustment system for more precise settings
- Slim and ergonomically designed body for increased comfort and control
- Quick release cam lock system for easy depth adjustments and base removal/installation
- Electronic speed control maintains constant speed under load
- Soft start feature for smooth start ups
- Fixed base accepts industry standard template guides for convenience
- High visibility base design for improved handling and performance
- Base can be removed quickly to install other bases
- Heavy duty aluminum motor housing engineered for increased durability
Features:
Specs:
Color | Teal |
Height | 6 Inches |
Length | 10 Inches |
Number of items | 1 |
Size | 0 |
Weight | 3.9 Pounds |
Width | 8 Inches |
19. DEWALT Router Edge Guide, Fine Adjustment, Vacuum Adaptor (DW6913)
- Straight guide with fine fence adjuster for precision positioning of the parallel fence
- Attaches to standard shop vacuum cleaners (1-1/4-inch, 1-3/8-inch and 1-1/2-inch)
- For use with all DEWALT routers
- Includes adapter for use with standard 1-1/4, 1-3/8 and 1-1/2-inch shop vacs
- Backed by a 1-year warranty
Features:
Specs:
Color | Multi |
Height | 5 Inches |
Length | 13.75 Inches |
Number of items | 1 |
Size | One Size |
Weight | 1 Pounds |
Width | 10.25 Inches |
20. DEWALT Router, Fixed Base, 1-3/4-HP (DW616)
- 1-3/4-hp, 11-amp motor provides the power to rout smoothly through the toughest hardwoods
- Micro-fine depth adjustment ring provides precise depth adjustments in 1/64-inch increments
- Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking
- Quick-release motor latches for fast and easy motor pack removal for bit and base changes
- Sub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy
Features:
Specs:
Color | Yellow |
Height | 7.25 Inches |
Length | 10.75 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 6.2390820146 Pounds |
Width | 9.6 Inches |
🎓 Reddit experts on routers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where routers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
You can spend WAY less. For one, buy tools as you need them, not all at once. To address some of your tools, here is my input. For reference, I am a homeowner and hobbyist woodworker, not a pro.
Table Saw: That Jet is overpriced for what you get. If you want to spend that much, get a SawStop, if you want a comparable saw to the Jet for significantly less, look at the Grizzly G0771z. I have the older revision of this saw(g0771) and love it. https://www.grizzly.com/products/Grizzly-10-Hybrid-Table-Saw-with-T-Shaped-Fence/G0771Z
Miter Saw: Ditch it. Anything you can do on it you can do on the table saw. Certain things are a bit easier on the miter saw like cutting molding, so if it is something you insist on, get a cheap one. You'll be surprised how little you use it.
Drill press: Can't beat free.
Router: Save yourself significant money but buying the Bosch 1617EVSPK. It is a combo plunge and fixed router(interchangeable bases) and is widely regarded as one of the best routers you can buy. https://www.amazon.com/Bosch-Combination-Horsepower-Variable-1617EVSPK/dp/B00005RHPD
Router Table: That one is nice, but there are cheaper options, such as build your own with MDF or look for used on Craigslist. This is a nice one, but expensive.
Modular Table Base: Not sure what you have in mind, but if you can build it definitely do so.
Jet Clamps: Nothing wrong with those, but they are expensive and probably more than you need. Have a harbor freight near you? Their clamps are cheap and decent enough. For more heavy duty applications, get some pipe clamps.
Dewalt Planer: If you have a need for a planer, yes this is the one to get.
Delta Jointer: Don't bother. You probably don't have a need for a jointer right off the bat and when you do, don't bother with the tabletop models. They are very limited with what you can get straight due to the short beds. Get a floor standing one with long beds. 6 inch wide if you must, 8 inch if you have the means.
Jet dust collector: This is another area where Harbor Freight shines. Jet is overpriced. The HF 2 HP is a great buy, make sure to use a 20% off coupon. https://www.harborfreight.com/70-gal-2-hp-heavy-duty-high-flow-high-capacity-dust-collector-61790.html
Band Saw: Don't bother with a 10 inch, it will be seriously limited. With the money you are saving on the other tools above, up your budget and get a Laguna 14|12 or 14bx. If that is too much, look for an older used 14 inch delta. Those old ones require a bit of cleanup but are built like tanks and will last you forever. No matter which saw you get, throw out the blade that comes with it and buy a good one. The Highland Woodworking Woodslicer blades are nice value for the price: https://www.highlandwoodworking.com/woodslicer-resaw-bandsaw-blades.aspx
Nail Guns: Do you really need a nailgun? And if you do, does it really need to be cordless? How much do you plan on using it. A combo kit with a compressor can be had for less than the price of one of the battery operated ones.
Paint Sprayer: How much do you plan on painting? A good roller is a lot cheaper if this is a one and done kind of thing.
Good luck and if you have any more questions I'll be happy to answer whatever I can.
Ultimately if you get serious into woodworking you are going to end up with several routers, a 3+ HP router table, at ~3 HP handheld, a 1.25 HP handheld, and a trim router. It all comes down to what you are doing with them. The router table is your work horse that you use for 90% of tasks, except for the few operations you can't do. The big routers are unwieldy to handle so you really have to make sure they are well supported and stable or then can get away from you. For larger bits you need the 1/2" shank and the extra power they provide but for smaller work you give up control and it's a nuance to use them. For those sorts of projects a smaller 1.25 HP compact router is the better option. You can't use the larger bits up much easier/safer the handle and more control. They use a 1/4" shank. For really fine work that you want to do free hand, say routing out waste for inlay, the trim router is what you want.
You want definitely want a plunge router. That allows you to start/stop in the middle of a piece by plunging down into it. I don't know that I've ever bothered to switch a router to fixed base. Variable speed control is also a must, you will get a much better cut if you have the correct speed for the bit/material you are working with. As far as as shank size you generally want 1/2" as it's safer, so if there is an option between 1/4" and 1/2" for that bit you'd usually go for the the 1/2". A lot of the smaller bits are 1/4" only, larger 1/2". You can use a 1/4" shank bit in a 1/2" router but not the other way around. So keep what bits you need in mind when you pick a router. Another important aspect is the router bits you use. Cheap bits are not worth it. A lot of people will say buy a cheap set then upgrade the ones you use regularly. I did that, not a great idea. The quality of the cut is poor and they don't feel safe. Do you want a cheap made in China bit spinning at a high RPM in a tool you are holding? No thanks! I get 1000% better results from good bits, smooth cuts and no issues.
For the sound of what you want to do I'd suggest a smaller compact router to start (then a router table /w dedicated 3+hp router motor). I like this one:
http://www.amazon.com/dp/B0049ZFUK2/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=3MF02H72ZOHDJ&coliid=I2UIP99Y0DK7X9
As far a bits go my top choice is Whiteside. The Freud quadra cuts (larger 4 winged bits) are super nice as well. There are several other good brands out there too though. I'd buy bits on an as needed basis as they are expensive for good ones.
Honestly, this question can be asked about any tool. Should a hobbyist buy cheap tools just to get started or spend more on quality tools, but buy fewer of them at first?
For the most part, I'm in the "buy quality tools" camp. I started out on the cheap tools (Skil, Ryobi, etc) and they made a lot of tasks harder than they needed to be. That is, a skilled craftsman could have gotten quality results from those tools but I certainly couldn't. I found that the quality of my work jumped dramatically when I switched to precision tools.
Now... in your case, none of three routers that you're referencing would be in the cheap crap territory, as far as I'm concerned. You'll do fine with any of them.
Some thoughts, though:
The Bosch 1617EVSPK is often considered the gold standard for mid sized routers. Many many woodworkers have that one and love it. You will absolutely not regret getting it.
The DeWalt DW618PK is a direct competitor to the Bosch and holds its own very well. Lots of very satisfied users of that model, too. Another that you'll definitely love.
The Hitachi models... are almost surely worth getting as well. I'll be honest, though -- they aren't talked about as much as either the Bosch or DeWalt.
One final thought: Depending on how you'll use a router, you might consider a "trim" router like the DeWalt DWP611PK. I've found that one to be notably easier to handle than my mid sized and it has handled everything I've thrown at it with aplomb. Really, the only downside is that it can only accept 1/4" shanks and most of my bits are 1/2". If I had more 1/4" bits then I'll likely use the DWP611PK almost exclusively when not on the router table.
I'm not saying you can't build floor to ceiling book shelves with out a table saw... but I can pretty confidently say I wouldn't be able to build quality shelves with out a table saw. Even a crappy bottom model contractor saw will help you do a lot of things.... If you're wondering check out
www.woodworkingformeremortals.com (i think I got that typed in right) and look at Steve Ramsey's videos up till about 2010 when he upgraded his saw. it's a crappy craftsman contractor saw but he makes some pretty cool stuff with it.
as far as saws go - I have the Ridigid one with the cast iron top - I can't think of the numbers at the moment. the reddit community seems fickle on this saw, some weeks reddit loves it, other weeks reddit seems to think it lacks balls. I personally have had it ~ 6 months and I love it. before that, I had a contractor saw and avoided table sawing as much as I could. Now, I find excuses to use it. seriously, I go out of my way to cut stuff on the table saw that would have been much easier with some other method. The other day I made a fresh loaf of bread and actually had to talk myself out of putting it on my cross cut sled. It seemed like a good idea at the time.
for a router I have this Dewalt. I actually got it for Christmas this year and so far haven't had any problems other then finding dust collection that will attach to the plunge base, but it's a minor problem really and to be honest, I haven't looked very hard.
Also since you didn't mention it in your tools list - get a 4 foot level if you're going to make a book shelf out of sheet goods possibly an 8 foot (but that's excessive). you're going to want a really good straight edge to help break down your ply before you try to mill it through a table saw or anything else.
Also - and it can be pretty cheap - compressed air with at least a brad nailer. I've found compressed air to be perhaps the most convenient luxury to have in the shop - others here might disagree.
Hope all this helps.
This is the router I use. Better dust collection in the plunge base than the Bosch, plus the hard case, and is otherwise pretty comparable.
The Skil is one I'd stay away from. They're not known for their quality, the plunge base feels pretty flimsy, it lacks some of the nicer features of the other routers. When you're going to be spinning high-speed steel at several tens of thousands of RPMs and that much HP, quality becomes a safety consideration.
I'd go with the DeWalt, but the Bosch is a good alternative if for some reason you don't want the DeWalt.
The easiest router table to build is a hole drilled through your workbench and a board clamped to it for a fence. Attach the fixed base underneath the surface pointing upwards and you're done. Anything nicer than that is optional. Norm's plans from New Yankee Workshop are a favorite, and a lot of people have similar designs available for free on the net. Dust collection and easy fence adjustment are the two key features in a table I'd say.
I've never joined the WWGA. Never saw a need. They have plans and stuff, but there are plenty of free plans for everything on the net, and I usually just make my own anyway. YMMV.
Good luck with your endeavours!
I have recently purchased my first home with my fiancée, and like all of you, have an enormous list of projects we'd like to do. I am fairly handy and am prepared to tackle any project (with supervision on electrical). All that being said, I have always used other people's tools when working on projects, so I don't have many of my own. I have a budget and would like to purchase all of my tools on Black Friday/Cyber Monday to get the best bang for my buck. I'd like your advice on which tools are the best for my budget.
We are planning on renovating the master bed, bath, and closet, kitchen, mudroom, and the laundry room. I also plan on making a kitchen table, coffee table, cabinets, dresser, etc. The first project is the laundry room and mudroom, which will require tile, built-ins, cabinets, and replacing washer/dryer. I have a tool budget of $5k-7.5k (ideally staying on the lower end) and would like your thoughts on my equipment list.
If you've used any of this below, what did you think? Are there any cheaper or better alternatives I should consider?
Last question: does anyone know where I can find plastic sawhorses that allow me to put a 2x4 across the top, but also allow the legs rotate for easy storage? My dad had these growing up and I cant find them anywhere. I have found all plastic ones, but I'd like to have the wood so I can saw through it and replace it as needed.
Thank you for your help! I look forward to keeping you updated with our projects.
If the EVS goes out, the router runs at max speed. Which can still be used but scares the crap out of me for slightly larger bits. The best tried and true router is the porter cable here
If you don't need anything that powerful, this one works well also.
Mid power range, this works okay as well.
There are a few other options available. If you want to move it between a pantorouter and table, these will work well. If you want to use it for router table only, triton is a much better choice due to the built in router lift and above table bit change.
grab this one and all your concerns will be addressed. it has both fixed and plunge bases. 1/4 and 1/2 collets. plenty of power, and since the bases are removable it mounts great in a router lift or a non-lift table. The fixed base is even designed to work as a mini-lift, allowing adjustments through the table. I own three of these and love them.
edit: it also has quite a few available attachments, like dust collection, edge guides, etc. it's a great starter router and a great forever router, IMO.
it will depend on what your thinking about doing. are you going to dedicate it to the table? answer these questions first.
generally people use a router table for work that would be dangerous if done by hand or requires very large cutter or cannot be done off the edge via a roller bearing.
making millwork for doors or windows, raised panel doors, stick and cope cabinet door construction, pattern routing...
I would start with the router table I wanted first? then work back to the motor/size brand that fits your budget.
your going to get all kinds of answers from /r/woodworking on tool brands. it's like a religious type of thing with most people.
Hitachi, Dewalt, Porter Cable all make very nice routers. my jess em table has a larger porter cable and it has run thousands and thousands of linear feet of material.
this one, it used to be the largest router they made. I don't know if that is true anymore but for a router table, go big.
http://www.amazon.com/PORTER-CABLE-7518-Speedmatic-5-Speed-Router/dp/B0000222V3
although I have only really been buying festool stuff for the last 3 or so years and would never go back to the other brands, but I know that is not an option for everybody and some like to just hate the festool stuff because it's very expensive. For me the $ is not an obstacle and they are the best production quality machines out there.
once again I'm a heavy user, as close to prosumer wood worker as you can get and have been doing it for a long long time.
edit:
also put one of these on your table router if you can
http://www.amazon.com/MuscleChuck-Camless-Change-2-Inch-Porter/dp/B00AO717HE/ref=pd_sim_sbs_hi_8?ie=UTF8&refRID=1Z8N9WHXD921CHNBPEDP
makes changing bits super easy, no more busted knuckles. I think white side also has something like this?
Assuming you are starting from the ground up and need everything, it's going to be tight and you'll have to skimp in some places, but this is exactly what I would do. The grand total here is $5005.00 and that includes shipping on the big ticket items which is a few hundred dollars.
Table saw and related stuff:
[Grizzly G0715xp] (http://www.grizzly.com/products/10-Hybrid-Table-Saw-with-Riving-Knife-Polar-Bear-Series-/G0715P)
Freud Premier Fusion
[Freud SD208] (http://www.amazon.com/Freud-SD208-8-Inch-Professional-Dado/dp/B0000223O9/ref=sr_1_1?ie=UTF8&qid=1395407011&sr=8-1&keywords=freud+sd208)
Gr Ripper 3d advanced (awesome on the router table too
Make your own ZCI's
Table Saw Total - $1,142
Jointer
Grizzly G0654 6" jointer (sell this on craigslist when you can upgrade to the 8". They hold their value really well and sell fast)
Jointer total $534.00
Planer
Dewalt DW734 - $399.99 most places. The 735 is nice, but not that much nicer. If I were to upgrade beyond the 734, I'd go for a 15" stationary unit.
Miter saw
Definitely go craigslist on this one. These things are a dime a dozen there. You can get a sliding 12" Dewalt/Makita/Ridgid, etc for around 250.00 to 300.00 Also pick up a decent Irwin Marples or Diablo blade
SCMS total - ~320.00
Bandsaw:
Craftsman BAS350. I own this. It's the SAME EXACT saw as the Rikon 10-321, just 200.00 cheaper. 8" resaw capacity and no stupid riser blocks to fuck up the geometry of your saw and make tensioning a nightmare.
Bandsaw Total - 620.00 with the Rikon resaw fence (bolt on) and a few timberwolf blades
Harbor Freight 2hp Dust collector, a lot of hoses, blast gates, and material to mod it to a 2 stage cyclone - 400.00
Router(s)
Bosch 1617 with both plunge and fixed bases
MLCS 15 bit set. Not the best, but better than absolutely anything else in this price range. Replace bits with Whiteside or Amanna when you have the cash.
Router and bits total 200.00
Also make your own table and fence to fill the empty space in your table saw.
Sanding
{Milwaukee 6021-21 Random Orbit Sander. Best ROS on the market until you go Festool/Ceros
Some klingspor abrasives in different grits
Shop vac bucket max and a 5gal bucket - perfect for sanders
Ridgid oscilating spindle sander. This is a tool I could definitely not live without after owning.
Sanding total - $320.00
Drill Press
Porter cable floor press
Also get the Porter Cable Forstner bit set and some decent brad points/twists)
Drill Press/bits total - ~$420.00
Clamps
Jorgensen Cabinet Master 4pc Set and various other bar clamps. The Pittsburgh ones from HF are pretty good
Clamps total ~ $250.00
Misc stuff
Woodriver bench chisels.
A vintage stanley block plane, and a jack plane
some plywood/melamine, and cheap hardwood and hardware to make a cross cut sled, router table/fence. drill press table, a workable bench/outfeed table and a grizzly woodworking end vise
Misc total - ~400.00
Personally I would spent my money on the router - many seem to like THIS ONE and it's been on my wishlist for quite a while now.
And then build your own router table which can be done very cheap from a sheet of melamine and a t-track kit from rockler which goes on sale for about $20 sometimes.
I invite you to check out MY BUILD from about a year and a half ago.
I would probably make the fence nicer now and use what I learned to make it neater - but it works great and is VERY accurate.
If you decide on that route go on Pinterest and look up router tables and get some inspiration before you start so you now what's out there and don't regret maybe not integrating a feature that you would've really liked in the after fact.
I agree, but I was more saying you don't even need a mill at all! Router jigs allow you to do the milling using a Laminate Router.
The results are still very good without a mill.
Here is a good video of how it works!
For around $300 you have the jig, router, and all the tooling. If you have at least a hand drill, you are ready to start making your own lowers!
This is the router that came fairly highly recommended back in the day when I was looking then I got a down spiral cut bit for my plunge cuts (1/4" since that is what the jasper jig uses), a few roundover/chamfer bits, and a flush trim... Bosh makes pretty good bits for the price so I usually stick with them. Looks like amazon is even running a $20 off dewalt tools right now too.
As far as a "bench" you don't need anything fancy most of my work has been done on a piece of 2'x4' ply on saw horses. With powertools you don't have much lateral force so you don't need something as sturdy as you would if you're using planes, hand saws, and chisels. You just have to be careful about making sure things are balanced and clamped properly so you don't accidentally tip your work surface. Bonus is that it can be folded up and stored easily and if you need a special spot to clamp just right I just cut into the ply.
Yes. DeWalt makes very nice routers and this is a very reasonable mid-size model. I'm going to give two other recommendations, though.
For mid-sized routers, you can't go wrong with the Bosh 1617EVSPK. It is a solid workhorse and wins more than a few comparison tests: http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD/
Honestly, though, I'd skip a mid-size router if I was getting my first router. The new compacts are extremely versatile and I find myself reaching for mine most of the time. It's gotten to the point that I use my router table for router table type stuff and my compact for everything else. My mid-size just sits there, except for rare occasions.
The best compact router I've found is the DeWalt DWP611PK. I've had it for about a year and it's been my go-to router ever since: http://www.amazon.com/gp/product/B0049ZFUK2/
If you only want to have one router, make it a full-sized router with fixed and plunge bases. If you're looking for low price, I recommend the Hitachi KM12VC.
I've used mine quite and bit and am VERY happy with it considering the price. Read the reviews, though. It's not perfect:
It's a great portable work table AND router table. Using the black plate as a template, you can use your router to make copies out of 3/8" or 1/2" plywood and then mount workbench tools to them. I've done this with a miter box & (hand) saw, a 6" light duty workbench vice, a Kreg K5 pocket-hole jig, and a Ryobi bench sander.
No, it's not quite the same as a 400 lb wood workbench, but then you can't (easily) hang a 400 lb workbench on the wall. Anyway, I have two of these things and they basically make my garage a workshop.
Buy quality tools. I suggest staying away from craftsman as they don't hold up and are basically junk. Keep an eye on Craigslist. I picked up a $1000 jet table saw with an exacta fence and a built in router table for $100. For your table saw I suggest investing in 2 good blades and a dato set. All 3 should run you less than $200. I like Freud blades. As for routers most are going to recomend one with a 1/2 collet but I would hold off on that at first and pick up a multi speed palm router. I have this one: http://www.amazon.com/Bosch-PR20EVSK-1-Horsepower-Fixed-Base-Variable-Speed/dp/B000ANQHTA I absolutely love it and I know they hold up to heavy use. You can make a table for it with a peice of 1/4 Baltic birch of mdf core ply. As for a sander a 5in random orbit is a good starter sander and they can be affordable. Chisels are easy to come by, keep an eye out at garage sales- you can allways sharpen old ones and typically they are better quality than the crap sold at the big box stores anyway.
I am a finish carpenter and cabinet builder, my little business builds train tables and can be found here: http://www.modelrailroadbenchwork.com
I don't have a ton of experience but when I was shopping for mine a few months ago I had it narrowed down to the Bosch or the 2.25 Porter Cable. I ended up with the PC and have loved it! I think I would have loved the Bosch too though. What I really like is having both a fixed and plunge base.
Also I found that amazon was the cheapest place to buy from but with after Christmas sales who knows.
Edit: Here is the one I bought and I chose it because almost every aftermarket router accessory is compatible with PC. But off of your list the Bosch is the way to go.
http://www.amazon.com/gp/aw/d/B0000DCBKN/ref=mp_s_a_1_2?qid=1419731010&sr=8-2&pi=AC_SX200_QL40
Hey OP depending on how much cash you got/What you want to make I can recommend you get this router here.
https://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD/ref=sr_1_1?s=hi&ie=UTF8&qid=1484624879&sr=1-1&keywords=bosch+router
It has sufficient power to handle most bits and has a super convenient height adjustment that can be used over the table with a hex key. It also comes with two bases (plunge and fixed) so you can just yank it out whenever you need it and not have to unscrew it.
Now if you want something that will handle anything you throw at it you can get one of those 3 1/4 HP monsters which will handle every massive 3 1/2 inch raised panel bits with ease.
Some good routers are:
https://www.amazon.com/Triton-TRA001-Precision-Plunge-Router/dp/B00779ND0Q/ref=sr_1_4?s=hi&ie=UTF8&qid=1484625229&sr=1-4&keywords=triton+router
https://www.amazon.com/PORTER-CABLE-7518-Speedmatic-5-Speed-Router/dp/B0000222V3/ref=sr_1_1?s=hi&ie=UTF8&qid=1484625371&sr=1-1&keywords=porter+cable+3+hp
OR if you got the cash you can buy Festools best router:
https://www.amazon.com/Festool-574354-EB-Router-2200-Watts/dp/B0079XHISS/ref=sr_1_2?s=hi&ie=UTF8&qid=1484625654&sr=1-2&keywords=festool+router
As far as insert plates are concerned Kreg makes the for several routers our you can get them from the manufactures of the router themselves.
I think it really depends on the size of projects you want to work on and the materials you intend to use. You can build a mini CNC quite easily for pretty cheap if you keep it small and use a Dremel or similar tool. If you are wanting to to get into larger projects with Hard woods or Aluminum, then you need to think about going with a Router. There are a few channels on YouTube devoted to DIY CNCs, my favorite is RadioShack7's if you want to see a fine example. DIYLILCNC has a few resources, as does Solsylva. As far as controlling the mill, there is a great/free example of a workflow that is easily doable, if you don't mind having a dedicated linux machine. Hope this helps.
So I don’t really know much about this router BUT if this is your first router and you want a good one to use for small to large projects I HIGHLY recommend this one. This was my first and I use it for EVERYTHING and for the price it’s the best router on the market IMO.
DEWALT DWP611PK 1.25 HP Max Torque Variable Speed Compact Router Combo Kit with LED's https://www.amazon.com/dp/B0049ZFUK2/ref=cm_sw_r_cp_api_i_3jyACbQW32Y0R
I have this Bosch trim router, and I have been pleased with it.
It is pretty light weight, and I like the way the design of the base allows you to easily handle it with just one hand. Bit changes are easy, and height adjustment is smooth and convenient.
I haven't had a need to adjust the speed, so I think if I were to do it over, I might have considered getting the one without the adjustable speed.
I use it primarily for round over and chamfer, but I also use it for skinny dados (like for a drawer bottom).
One thing to remember is that these pony routers only accept quarter inch bits, so if you have been collecting quality half inch bits, you will need to re-buy any that you intend to run in these machines.
It doesn't come with any dust collection ability, but there are a variety of add-ons you can buy if that is important to you.
The right tool is a moving fillister plane, or a rabbet plane. Bad ones suck. Good rabbet planes have skewed blades and nickers and cost 5-6x as much as the options you linked above.
Here's a wooden one that I wouldn't mind using.
And a metal one that I'm planning to purchase soon.
I use this to cut rabbets now. It lacks a nicker + is not skewed, so it does a mediocre job at cross-grain rabbets. Generaly, when rabbeting cross-grain, I start out by using a carcase saw to perform the cross-grain cut, then use the plow to clear the waste. At the end, I come in with a skewed chisel or a scraper to leave a clean surface, since planing with a straight blade across the grain tends to leave a bit of a mess. It's a lot of work--all of the options that you linked will have the same shortcomings, since they are not skewed and lack nickers.
The only plane in your list that's truly made to cut rabbets is the Stanley No.78 copy. The rest are better described as shoulder planes or router planes.
To quote Schwarz on the 78, "After working with a No. 78 for years, I concluded that it does its best work in softwoods that are going to be painted and displayed in dimly lit rooms." Yeah. It's that bad. To add insult to injury, the modern copies are usually worse than the originals.
It's likely that the most cost effective solution here is to buy a $99 trim router like this or this and a straight bit. Both of those come with edge guides. TBH, even with a lot of nice hand tools in my shop, I reach for little routers like these all the time for quick rabbets/grooves/etc. They are incredibly cost effective and really nice to use because they're so small/light.
If it is his first router, I would recommend getting the DeWalt 611PK kit. It is a compact router, but it is pretty powerful for its size. I bought the Bosch recommended in another comment as my first router, and looking back, I wish I had purchased the DeWalt first. I find myself using the smaller router far more than the bigger one. Plus, the entire kit is around $160, so you have plenty of money to get a MCLS bit set and still be way under budget.
Just my 2 cents.
which bosch are you referring to? Why don't you like the of1400? Before I was considering it, I had pretty much narrowed things down to this dewalt.
I have no interest in a festool router table. what makes festool routers not work well in other tables? I'm pretty much ready to pull the trigger on buying the TS55. If I'm going with a festool dust extractor it seemed like a good idea to also get the of1400 for dust collection purposes.
Hi,
I bought a dewalt router DEWALT DW616 1-3/4-Horsepower Fixed Base Router
Its great for big projects but i was wondering what would be recommended for more fine detail work, like internal cut outs. I feel like its too bulky and powerful for me to try and do an internal feature accurately
I have the Bosh which I like, but it now resides in the router table and I use my Milwaukee for everthing else. I really like the body grip as I can confidently manuver it with one hand when needed. (Like when your cord gets hooked on something during a long cut).
http://www.amazon.com/Milwaukee-5616-24-Max-Horsepower-Multi-Base-Includes/dp/B000QV1CXW/ref=sr_1_1?ie=UTF8&qid=1419731361&sr=8-1&keywords=milwaukee+router
if you're willing to buy new, i suggest going smaller for your first router: https://www.amazon.com/DEWALT-DWP611PK-Torque-Variable-Compact/dp/B0049ZFUK2
I have a full size Bosch router that has a lot more power but I like my little router much more. It's great for doing freehand stuff (routing out butterflies, small mortises, etc) and should be able to handle any edge routing you want to do.
Basic freedom kit:
https://www.80percentarms.com/80-ar-15-easy-jig-gen-1/
https://www.80percentarms.com/gen-1-easy-jig-tool-kit/
https://www.amazon.com/DEWALT-DWP611PK-Torque-Variable-Compact/dp/B0049ZFUK2/ref=pd_lpo_sbs_469_t_0?_encoding=UTF8&psc=1&refRID=TJ0F7J784GV5Y2QAE3PW
https://www.harborfreight.com/power-tools/drills-drivers/drill-presses/8-in-5-speed-bench-drill-press-60238.html
https://www.righttobear.com/cerro-forge-raw-80-percent-lower-receiver-p/80raw-1.htm
You don't actually need a drill press, but I like to have one (for P80s as well). There are higher end jigs, routers, and drill presses (Easy Jig gen 2, 5d Tactical) but these are good enough to get you going. They are what I use (minus that drill press, I have a brand name one) and they work well repeatedly.
https://www.amazon.com/DEWALT-DWP611PK-Torque-Variable-Compact/dp/B0049ZFUK2/ref=sr_1_1?s=power-hand-tools&ie=UTF8&qid=1480055730&sr=1-1&keywords=dewalt+router
This is the one I bought. Super happy with it. I mounted it upside down on a table and turned it into a table router. works great.
Bosch 1617 evspk
Great router, great build quality. Nice plunge base. Really like the handles, feels a lot better to use than the ones with molded plastic. Depth adjustment is one of the best I've used. Built in above-table depth adjustment if you mount it in a table. Soft start is nice. Variable speed. Motor is a good power, enough for almost any size bit, but not so huge that its hard to control.
I agree with the other poster. A router would be great. I'm also beginning at this, and I have a miter saw, table saw, trim router, and circular saw. While the miter saw is fast and easy for crosscuts, it only does crosscuts. A table saw will do crosscuts and rip cuts. The only place where a table saw sucks at crosscuts is long lumber.
A router, however, can be used for edge profiles, dados, slots, rabbets, mortises, etc. A table saw can do dados and rabbets.... But if the board is too long, it can't do dados, and rabbets might be unruly. The only power tool you have that can do mortises is a drill, but even that would be better with a drill press.
I suggest a router. The Bosch 161EVSPK is highly recommended and can be used for basically anything you would throw at it as a new woodworker. It comes in at 220$ but includes both the plunge base and the fixed base. The fixed base can easily be installed in a router table (either shop made or purchased) and you can do depth adjustment from above the table.
A bit over $150 (currently 189 less 25 for the holiday promotion), but if he needs a good router I've loved this set. Tons of things that you can use a router for in the shop and this one has lots of accessories that cheaper ones lack like edge guides and dust collection.
https://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD
to expand on this.
you'll want to buy a cheap powered router, a straight bit, a couple of clamps and HEARING and EYE PROTECTION.
i can't stress those last two enough.
once you've done that,
i recommend practicing on a bit of extra wood. get the idea down and then do it on your final piece.
I agree with every point here. I have used this Bosch router or one very similar, and recommend it highly.
I own this Milwaukee router and it's been a real work horse, although it did need repair once.
Porter cable is also excellent. I don't know if I'd get Ryobi, and I definitely wouldn't get Craftsman.
The plunge base is nice, but I very rarely use mine. You could skip it and save a few bucks and probably never miss it.
I really like the Bosch 1617EVSPK (currently $200 at Amazon). If that's too far out of the budget, I'd go with a Craftsman 27683 ($125 at Sears).
I think you'd really benefit from the versatility offered by a kit with fixed and plunge bases, as well as the ability to accept 1/2" and 1/4" collets.
I purchased a Makita RT0701CX7 1-1/4 HP Compact Router Kit https://www.amazon.com/dp/B00HAQMHEO/ref=cm_sw_r_other_apa_2HUWAb0HB6ZMG.
So far I have been happy with it. It is great for hand use and I made an aluminium plate to attach it to an MDF routing table extension for my table saw.
Pretty spot on. Unless OP has a fair amount of money to spend I'd suggest the Bosch MRC23EVSK as a solid alternative. I had / have both (had the Bosch, now have the Festool) and they're pretty comparable.
I think the Festool is a superior router; it's plunge action is silky smooth and the dust collection is top notch but you're paying a hefty premium to get those. The Bosch is more than satisfactory and I actually prefer it's trigger system to the Festool's.
As someone about to take out some material with a forstner and then take the rest out/smooth it out with a router that I have never used before, I'm now slightly terrified to tackle this project. Before I head into this I figured I would ask a couple questions.
I have a template that I purchased along with the bowl bit. It sounds like one of the issues was that the bearing was not fully on the piece of wood? If I make sure the bearing isn't partially above the template when I start should that be okay? Not sure if I explained that well or am fully understanding the part where you mentioned "mistake number one".
When the bearing was riding up the spiraling lip of the forstner bit remnants, is that something I can avoid by starting the bearing on the template and smoothing everything below before plunging the router a little deeper? For this project I will need to use a collett extension to get the router bit deep enough so it will eventually have to go below the template and ride along the work piece.
Any other tips you can give me before I head in would be great! This is a 2.5 HP Bosch plunge/fixed base router. This one to be exact - http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD - Would it be smart to start on a lower speed? Or would a higher speed be smarter to make sure it doesn't snag on the hard wood? I'm using a combination of maple/walnut glued together.
For that price, you can get the Bosch, which I think is a better deal. It's the router I have, and I've been quite happy with it. That said, a router is a router in many cases. I think the Bosch is a better deal as you get the fixed base that you can put in a router table and use the plunge base for all your handheld uses.
My 618 has been great, and the D-handle option makes it even more useful. The alternative is the Bosch 1617EVSPK, which is also well regarded.
https://www.amazon.com/DEWALT-DW616PK-Horsepower-Plunge-Router/dp/B00006JKXD/ref=sr_1_13?ie=UTF8&qid=1485455525&sr=8-13&keywords=dewalt+router
I have been very happy with this kit. I always likes the dewalt design for a handheld and it won't break the bank.
A table is very useful but if you want to lower the cost of entry you can easily make one with some plywood. Router tables don't need to be anything fancy to work really well.
I wanted to buy a hand tool, but I couldn't see the logic in doing so when I could get a powered router for the same price.
https://www.amazon.com/gp/product/B0049ZFUK2/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1
I was debating on this one and the makita that i saw was recommended. But this one ended up being cheaper on prime day.
Edit: I have never used one of these things. What kind of bits are ideal for woodworking?
This is a prime example. This router is on "sale" for $119 claims it was $250. Wow great deal
https://www.amazon.com/DEWALT-DW616-4-Horsepower-Fixed-Router/dp/B00006JKX9/ref=sr_1_16?s=prime-day&psr=PDAY&ie=UTF8&qid=1499779209&sr=1-16&keywords=woodworking
Its at home depot for the same price.
http://www.homedepot.com/p/DEWALT-1-75-HP-Fixed-Base-Router-DW616/100609349
Dewalt I got. Love it. Also what we use at school. They get a massive amount of use. Seem pretty bulletproof to me. And, -$15 = more wood, right?
Not nearly as hard as it looks. You could do the polymer80 pistol in your bathroom.
Once you drill the pin holes (do this first), don't try and force your pins to fit with a hammer, especially not with the locking blocks inserted.
If they don't fit, put it back in the jig & do a second pass through with your bit while rotating your drill slightly. It'll widen the hole just enough for the proper alignment. If you're worried that hole is too big, use some red locktite & it won't go anywhere.
Go slow with the dremel.
With ARs, I like raw lowers. I'm typically going to coat them, and I'd rather err on the side of it never breaking than buying a polymer lower.
This polymer one is $80
This aluminum one is $45, and I've never found the blemish that got coated anyway.
There are cheaper ones out there, but that blemished one is a decent price and I like the company. Machining isn't bad at all. After your first couple, you can breeze through milling.
I recommend a router & jig unless you're comfortable with your machining work. I started with this router & this jig.
If you've got the money & see yourself doing this often, maybe put a down payment on a Ghost Gunner3.
As for your builds, get a good idea of what you want before you throw cash at something you're less likely to use in the long run. You probably know this hobby isn't cheap.
I'm starting a new build with a 13.7 in barrel because it's not a 16 inches. Something like this goes into other areas you'd want to learn up on like buffer weights, gas tube lengths, & receiver extensions I don't want to fool with in a lower I could just switch uppers for.
Keep in mind things like this when you're building
^TL/DR: You can start a lower as a pistol & change it over to a rifle, and then back to a pistol no problem. I don't think you can turn a lower that was originally a rifle into a pistol.
Here it is. Not only is it a good router with 3 1/4 HP but the lift works great. I got the Kreg router plate which has the cutout so you can use the lift.
Thanks! Any links or suggestions on a router table set up that would be better suited for trim molding?
How about this? https://www.amazon.com/dp/B00005RHPD/ref=cm_sw_r_cp_api_i_FP5TDbH7A1RC5
This comes with 2 choices. Comes with a plunger and fixed option, but for twice the money it can come with a table. Is the table necessary or would I be better off skipping it and just saving the money?
I have both a trim router and a 2.25 hp router (actually 2). If I could only have one, it would definitely be the larger one. Trim routers are great for edge profiles (round-overs, etc), and maybe some smaller mortises, but they can't deal with much more. I also had an earlier version of that Ryobi. It was OK, but even that had difficulty handling bigger cuts, plus it didn't work well in a router table set up. If you can swing it, the Bosch 1617EVSPK is a great package
So full price, the Craftsman is roughly equivalent to this Bosch. How do these two actually stack up and is the Bosch worth the premium over the Craftsman even at the sale price?
EDIT: Just noticed the lack of a built-in dust collection system on the Bosch. Looks like this kit would solve that issue for another $40.
Also, any recommendation on good value bits?
This is the best response here as you already have the tool.
Dremels generally have a router attachment available for them, so you can control the depth that you're cutting to. Put a normal cutting bit into your dremel, and go to town routing a recess in the back of your piece to whatever depth you need.
Long term, pick up a router. The larger motor can handle bigger bits, and will save you a lot of time cutting these kinds of pockets quickly and easily.
In that case, you really should look at either the Rigid 4512 or the Delta 36-725 (either runs $500-600 at HD or lowes). That $200 kobalt saw is not going to serve you very well. I wrote up https://www.reddit.com/r/woodworking/comments/3j4zl9/intro_to_tablesaws/ to help out folks looking for a table saw. Craigslist can take some time- even if there's nothing now, you may well be able to find a deal if you can wait a while. Set up an automated search that emails you when it finds new matches.
As far as a router goes, I'd recommend http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD over the one you linked, for very similar money.
I have the Dewalt DW618 and I really like it.
http://smile.amazon.com/DEWALT-DW618PK-12-AMP-Fixed-Base-Variable-Speed/dp/B00006JKXE/ref=sr_1_1?ie=UTF8&qid=1452215648&sr=8-1&keywords=dewalt+618
I also recently got the 1 1/4 HP Dewalt DWP611, and I am really surprised by how powerful it is for its size.
http://smile.amazon.com/DEWALT-DWP611-Torque-Variable-Compact/dp/B0048EFUV8/ref=sr_1_1?ie=UTF8&qid=1452215796&sr=8-1&keywords=dewalt+611
+1 for Starrett Square, 6 or 12 inch, whichever he doesn't have.
Compact router to compliment a big one he might have?
http://www.amazon.com/gp/aw/d/B0048EFUV8?vs=1&vs=1
Fancy glue scraper:
http://www.benchcrafted.com/Skraper.htm
I do like planes because they're pretty: low angle 102 in bronze.
https://www.lie-nielsen.com/product/small-block-planes
I really like the Bosch router I have. Plenty of power and you can swap out the fixed base for a plunge if you want.
My router spends most of its life in this table, which I also like.
It's really durable, as well. It's been in daily use for almost a year without issue.
Yes. Even at the best sale price I've ever seen it was still over $300.
Now you just have to complete the set and form the world's highest RPM voltron.
Bosch makes a nice router kit that accepts 1/4" and 1/2" shank bits and comes with a fixed base and plunge base, all in a nice case. I got mine for just under $200 and have since spent an additional $45 for a table insert for my main powered workbench. You can also find refurbs for $150ish.
Bosch 12 Amp 2-1/4 Combination Horsepower Plunge and Fixed Base Variable Speed Router Kit 1617EVSPK with 1/4-Inch and 1/2-Inch Collets https://www.amazon.com/dp/B00005RHPD/ref=cm_sw_r_cp_apa_i_YxXbBbAQJ61KP
Also picked up the Bosch 1617EVSPK kit and have been very happy with it. Only used the fixed base mounted to a router table so far, and has performed nicely. As me again in a week and I will let you know how the plunger base performed.
I agree that's a great router.
And to be devil's jackass here, I fully believe there will come a time when you want to put a router in the table and leave it there. When you do, this Porter Cable either with the base, or only the motor, is a good option.
Certain dremels come with a router attachment that can help you route a rabbet. Here is an amazon link https://www.amazon.com/Dremel-335-01-Plunge-Router-Attachment/dp/B0000DEZK4
I have the Hitachi and it's great value. I really like the fact that it fits Porter Cable bases. The start and stop switch could be in a better position but it's a fine tool.
for an all around router 2hp would definitely be beneficial. you may run into a few things that are tough to get through with a 1 or 1.5 hp router. i caution you on buying a used router, you never know how it may have been treated. they're some fast spinning tools that do sometimes break. i would recommend the hitachi fixed base router if you're looking for an affordable one. it can be had for $115 and is 2.25 hp.
http://www.amazon.com/Hitachi-M12VC-4-Horsepower-Variable-Speed-Router/dp/B0002ZZWXI
Canadian Links
Hitatchi Combo
Bosch that is on sale actually a pretty good price
Dewalt
Is it really worth it to get a 3 1/4hp model for twice the cost of a 2-1/4 hp fixed model?
Would a 2-1/4 with plunge and fixed base model be good enough for entry level routing?
Amazing work. Do you think this is feasible using the Dremel 335-01 attachment?
My router has an on/off switch and that's it :/
https://smile.amazon.com/gp/aw/d/B00006JKXD
Was great for flattening my workbench top. Maybe I need something more... subtle, for tasks like this
It's not necessarily for a project, he's just suggested that he wants one for quite a while. I'd like to keep it under $250. If that's not feasible, I'll just go in another direction; I don't want to get him a bottom-shelf K-mart clearance tool.
EDIT: Is this a good choice?
make 5 identical plywood boxes.
you'll probably need additional tools to construct this.
if you can afford it, the makita 1-1/4hp router and a whiteside 1/4" upspiral bit are the only two additional tools necessary to construct both the boxes and drawers. use a straight edge for the guide.
if you want to go with hand tools only, you'll need a rabbet plane.
Get him a decent router. maybe one with a fixed base and plunge base that you can swap in and out. You can do a lot of fun things with a router and it wont break the bank.
I have an older version of this one without the plunge base and its served me quite well.
http://www.amazon.com/PORTER-CABLE-895PK-4-Horsepower-Fixed-Plunge/dp/B0000DCBKN/ref=dp_ob_image_hi
depending on budget the sky is the limit really. What kind of tools does he currently have?
This is a pretty popular one. I don’t have it but I’ve heard it works real well.
Bosch 1617EVSPK 12 Amp 2-1/4-Horsepower Plunge and Fixed Base Variable Speed Router Kit with 1/4-Inch and 1/2-Inch Collets https://www.amazon.com/dp/B00005RHPD/ref=cm_sw_r_cp_api_sFIhAbT4DKK1X
The Hitachi router combo set was cheaper than Amazon when I picked it up, plus the 10% military discount made up for the sales tax.
http://www.lowes.com/pd/Hitachi-2-25-HP-Variable-Speed-Combo-Fixed-Plunge-Corded-Router/50425858
https://www.amazon.com/dp/B0002ZZWX8/ref=twister_B00QTCPZLM?_encoding=UTF8&psc=1
Its not a Bosch or PC, but I like my green tools a lot. I've got four routers, two of which are Hitachi. Never had any trouble with their stuff.
this has been a great unit
Routers have a pretty wide price range. People generally like Bosch for these kind of detail and precision things, sanders, routers, etc.
Bosch 1-handed 1hp for $99
Bosch big mama 2.25hp for $207
Have you read this guy's evaluations?
New Woodworker Routers
If it were me, I'd buy new only things you intend to keep for a lifetime, and buy an appropriately powerful and versatile tool. For instance, a compound mitre/chop saw can be had from DeWalt with MOST of the features except sliding to cut really wide boards for about 200 bucks, and it would take you awhile to outgrow it. Same with router. If you can afford this big honkin' Bosch and it does what you want, consider acquiring it for your 'lifetime' stable.
If you need a tool for a specific project but aren't sure of its general applicability, you should look on craigslist, particularly at estate sales, or consider Harbor Freight.
This is the Bosch variable speed router I have & it works a treat. Just remember that any router is typically too fast to be effective at cutting metal but fine for wood & plastics.
With drill presses, I like the old adage: a bad drill press is far better than no drill press.
I'd go pick up some 100 dollar thing, or (depending on your needs), even a dremel plunge router attachment will work. I use one of those for drilling butt joint pilot holes. obviously not as powerful/deep/etc as a full press, but good enough for my modest needs.
https://www.amazon.com/gp/aw/d/B00006JKXE/ref=mp_s_a_1_2?ie=UTF8&qid=1503877361&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=dewalt+router+618&dpPl=1&dpID=41l029-sITL&ref=plSrch
Happy with my dewalt here.
I haven't used either of those two routers, but would highly recommend the Bosch MRC23
Here's the kit I bought. Looks like the price dropped.
Also look at the models; some have edge guides, some have tables (so it can be hand-held or table mounted), or both.
If I had the option, I'd have gotten the table as well, so I'd have options.
Bosch Router Power Tools 1617EVSPK - Combination Plunge, Fixed Base Router Tool with 2.5 Horsepower, Variable Speed - Wood Router, Table Saw Kit with 1/4", 1/2" Collets For Woodworking, Trim Carpentry https://www.amazon.com/dp/B00005RHPD/ref=cm_sw_r_cp_apa_i_jtLQCbJN2R1P4
If you live close to the border, you may want to order the US price (U$D189 = CA$194) and save yourself almost $50
This $99 Makita compact router has served me very well and is surprisingly useful for it's size. You'll probably want to add a bigger router in the future, but you'll still grab this one for a bunch of tasks. https://www.amazon.com/Makita-RT0701C-1-1-Compact-Router/dp/B00E7D3V4S
Hitachi KM12VC - 1/4 and 1/2 collets, plunge base, soft start, variable speed, 2.25 HP, accepts many standard attachments, includes hard case, very quiet. $150 at Menards and $160 on amazon.
Has pretty good reviews. Many of the bad reviews are complaints about removing bits. Apparently, this router has an unusual bit release that partially loosens, then gets tighter, then fully loosens. It seems to give some people issues, but after ya figure out what it's doing, it's not a problem.
I am going to add this to the list and see if I can get my mom and sister to just combine and get this for me haha. It's the Makita RT0701CX7 https://www.amazon.com/dp/B00HAQMHEO/ref=twister_B00TX467W4?_encoding=UTF8&psc=1
I've been very happy with my Bosch. Part of the reason I bought it too is because another base can be bought for $50 that has a long hex key for raising and lowering from a table top. I haven't build the extension for my table saw yet, but can't see it giving me any issues mounted that way.
The PC that the other two mentioned here seems nice also though. I've just never had good luck with PC, or Dewalt for that matter. I guess it's a preference though.
http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD
Is this bosch still a good first router to buy?
Hey thanks for the message. The main reason I was looking at the smaller dewalt was due to savings on cash. I think if I was in the $200+ range I'd go for this Bosch It's only $3 more and has 0.5 more HP.
Edit: typo
I guess Bosch makes a nice smaller one, anyone have any experience with this router?
http://www.amazon.com/Bosch-PR20EVSK-1-Horsepower-Fixed-Base-Variable-Speed/dp/B000ANQHTA
If you have a mill, you can get by with a straightedge and a sharpie. If you don't have a mill though I highly recommend this router and either the 5D Pro jig, or the Modulus Extreme jig.
Porter cable is quite nice, would also recommend checking out Bosch: http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD/ref=sr_1_1?ie=UTF8&qid=1371188943&sr=8-1&keywords=bosch+router
I did something similiar on my Rigid 3650 as far as the router table goes. My recommendation would be not to cheap out on the mounting plate - I ended up going with a plastic mounting plate off amazon that has been terrible. Looking into either the JessEm or Woodpeckers plates myself.
In woodworking I stay away/give away anything craftsman before it hurts you or ruins your project.
A router is very versatile. This is a tool you don't want to cheat yourself. You will want one that can plunge as well.
There is no need to put money into a router table if you don't have money. I built mine out of mdf, and when I got money spent some on a better top.
Bosch is typically my go to brand. I went with them here as well. And have been very happy. Power is up to you. I went mid range and it has been just fine. A little Bulky for fine stuff (if handheld) but can tackle the bigger projects. this is the one I have and would recommend.
http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD
Edit: as much as I hate Dewalt s terrible, terrible customer service if you found theirs for a good deal I have used it as well and is good.
You can get an attachment for the Dremel that will let you use it like a mini-router.
That Makita one is OK but this bosch one is the router you want. It has more power, a plunge base, and both a 1/4 and a 1/2 inch chuck. It has all the power you should ever need and it is variable speed.
I still play with toys. Different toys, though. More expensive, heavier, higher age rating.
Bought this a few days ago:
https://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD
Looking at this one on Amazon - http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1463398215&sr=1-1-catcorr&keywords=router+combo.
I had no idea they were quite this pricy for a good one. My budget doesn't really have $200 in it right now. I may have to get this project to the point where it's done except the routing and then re-evaluate where I am financially.
Please don't buy that router, instead buy a DW 618PK or a DW 621.
Also consider a bit from Eagle
I'd consider getting a router that takes a collet. You can get 1/2" and 1/4" collets (as well as others).
I own this router and I buy my collets from here.
It's a Bosch 1617EVS - 2-1/4HP
https://smile.amazon.com/gp/product/B00004TKHV/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
The bit is a Yonico 1-1/2"
https://smile.amazon.com/gp/product/B00KZM20GU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
It worked well but I did have to remove a lot of material to get it flat and ended up making to passes per side.
Its this one I got on amazon
https://www.amazon.com/Dremel-335-01-Plunge-Router-Attachment/dp/B0000DEZK4
This is in my amazon shopping cart.
http://www.amazon.com/gp/product/B00005RHPD/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
Bosch 1617EVSPK 12 Amp 2-1/4-Horsepower Plunge and Fixed Base Variable Speed Router Kit with 1/4-Inch and 1/2-Inch Collets
Bosch 1617 evspk is a solid choice
https://www.amazon.com/Bosch-MRC23EVSK-Combination-Fixed-Base-Variable/dp/B002LASDGA
$50 off the Bosch Router combo kit is tempting
https://www.amazon.com/Bosch-Combination-Horsepower-Variable-1617EVSPK/dp/B00005RHPD/ref=lp_19471440011_1_15?s=hi&ie=UTF8&qid=1563205989&sr=1-15
DEWALT DWP611PK 1.25 HP Max Torque Variable Speed Compact Router Combo Kit with LED's
https://smile.amazon.com/dp/B0049ZFUK2/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=7D56CMDZX75Z&coliid=I1UOVUHDTJ2VIN&psc=1
this
I just bought this: http://www.amazon.com/dp/B00006JKXE/ref=pe_385040_121528360_TE_dp_1
Love it so far.
https://www.amazon.com/dp/B00005RHPD/ref=cm_sw_r_cp_awdb_t1_7HYYDbYR4SAEE
Makita RT070X
link
In the same league as the Dewalt 661 but cheaper. You can find comparison videos between them on youtube.
https://www.amazon.com/DEWALT-DW618PK-12-AMP-Fixed-Base-Variable-Speed/dp/B00006JKXE/ref=sr_1_2?s=hi&ie=UTF8&qid=1480635974&sr=1-2&keywords=dewalt+router
Plunged and Fixed Base.
a set of veritas joinery saws
bosch router kit
JessEm Rout-R-Lift II
http://www.jessemdirect.com/Rout_R_Lift_II_p/02310c.htm?1=1&CartID=0
Bosch 1617
https://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD
I may upgrade the router later if I need to. I just happened to have this one.
https://www.amazon.com/Makita-RT0701C-1-1-Compact-Router/dp/B00E7D3V4S
https://www.amazon.com/Dremel-335-01-Plunge-Router-Attachment/dp/B0000DEZK4
https://www.youtube.com/watch?v=1xpWCpvsoEU
http://www.amazon.com/gp/aw/d/B0002ZZWXI/ref=mp_s_a_1_1?qid=1375387790&sr=8-1&pi=SL75
This guy.
Not following the laminate idea, care to explain further?
Good idea about jigsawing a template and then routing. However, my one attempt, some time ago, to use a hand-held router to cut a smoothly curving line in a plywood board ended in disaster. The tool (a relatively cheap Black & Decker) was probably partly to blame, however. Would this one suffice?
if you had a dremel, it has a router kit
https://www.amazon.com/Dremel-335-01-Plunge-Router-Attachment/dp/B0000DEZK4
and a cheaper one that usually comes with it, for like 6-7 dollars
but ive only used it for smaller wires, ill be ordering that bigger one since it has a guide
I believe it is this one
DEWALT DWP611PK 1.25 HP Max Torque Variable Speed Compact Router Combo Kit with LED's https://www.amazon.com/dp/B0049ZFUK2/ref=cm_sw_r_cp_apa_P3SDzb09F30DW
I think open builds part store also sells it but my phone is being a pain and won't load.