Reddit mentions: The best spare tire carriers
We found 30 Reddit comments discussing the best spare tire carriers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 19 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. CURT 31006 24-Inch High Trailer Hitch Spare Tire Mount for 2-inch Receiver
- VERSATILE. This spare tire mount has slotted holes and a 24-inch height to fit a wide range of tire and wheel sizes (tire mounting hardware not included)
- STANDARD FIT. This trailer hitch spare tire mount is equipped with a standard 2-inch shank to fit any industry-standard 2-inch x 2-inch trailer hitch receiver (hitch pin sold separately)
- FRONT OR REAR. This trailer hitch accessory can be mounted on the front or rear of the vehicle, wherever a standard 2-inch receiver is properly installed
- SOLID STRENGTH. This receiver hitch spare tire mounting bracket is constructed from steel to provide dependable strength for miles to come.CURT hitches are welded using manual and robotic processes for speed and precision
- CORROSION-RESISTANT. For long-lasting protection against the elements, this trailer hitch wheel mount is shielded in a durable black powder coat finish
Features:
Specs:
Color | Black |
Height | 7.5 Inches |
Length | 24.5 Inches |
Weight | 16 Pounds |
Width | 17 Inches |
Size | 24 Inch |
Number of items | 1 |
2. EMS Offroad Tire Carrier Hinge and Latch
2000 lbs LatchLock nuts and CatchWeld thru SpindleTire Carrier HubBearings Seals and Dust Cover
3. Trimax Spare Tire Nut Lock - Fits All Side Mount Spare Tires with Flat Keys TNL740, Clam Packaging
TRIMAX Corporation is the world’s leading lock manufacturer providing customers’ high quality products through innovative designPackage Weight : 0.5 poundsPackage Dimensions: 4.0 L x 12.4 H x 5.8 W (centimeters)Country of Origin: China
Specs:
Height | 5.40157479764 Inches |
Length | 1.99999999796 Inches |
Weight | 0.45 Pounds |
Width | 3.29921259506 Inches |
Release date | February 2012 |
Number of items | 1 |
4. Performance Accessories 85207 Swing-A-Way Wrinkle Black Finish 2-Door or 4-Door Tire/Can Carrier
Tubular construction with 1.5 inch diameterIncludes hi-lift jack mount locationProvides durability and strengthSpin-on mount will accept most aftermarket wheelsSwing-away design allows full access to tail gate
Specs:
Height | 14 Inches |
Length | 51 Inches |
Weight | 71 Pounds |
Width | 25 Inches |
5. AUXMART High Lift Jack Mount Rear HIGH Lift Jack Mount for 2007-2017 Jeep Wrangler JK Off-Road
【HOLD OFF-ROAD JACK】AUXMART off-road jack mount allows you to carry your off-road jack on the outside of your vehicle saving precious cargo space. The bracket is sturdy and secures the jack in two locations to reducing vibration and noise during vehicle operation.【SUPERIOR CONSTRUCTION】Exper...
Specs:
Height | 9.842519675 Inches |
Length | 16.535433054 Inches |
Weight | 6.87 Pounds |
Width | 4.9212598375 Inches |
Size | For JK |
6. Daystar, Jeep JK Wrangler Tailgate polyurethane bumpstop, stop the spare tire rattle, fits 2007 to 2017 2/4WD, KJ09144BK - Black
- Designed to provide increased strength and less deflection under load
- Made high quality polyurethane
- Ensure long lasting durability
- Facilitates easy installation
Features:
Specs:
Color | Black |
Height | 7 Inches |
Length | 3.5 Inches |
Weight | 0.1 Pounds |
Width | 3 Inches |
Number of items | 1 |
7. Hollywood Racks Bolt-On Spare Tire Rack
This spare tire bike rack attaches to the spare tire mounting bolts with a universal plate that fits most bolt patternsThe bike rack to the spare tire with a hand tightened knob.Includes three extension brackets to fit up to 12” tires; Will not fit 2018 Jeep WranglerBike support arms adjustable fo...
Specs:
Color | Black |
Height | 11 Inches |
Length | 31 Inches |
Weight | 24.25084882 Pounds |
Width | 5.5 Inches |
Release date | January 2012 |
Size | 2 Bike |
Number of items | 1 |
8. YAKIMA, Spare Tire Carrier for Roof Racks and Cargo Boxes
- Get some space: Mount your spare tire on your LoadWarrior, MegaWarrior or OffGrid basket and free up room inside your vehicle for more toys
- Carrying capacity: Carries spares up to 35"; Keeps tire accessible and out of the way
- Easy install: Installs in just 5 minutes with some assembly required; Quick release for easy installation and removal
- We’ve got your back guarantee: Covered by our Limited Lifetime Warranty
- Take it easy: For nearly 4 decades we have, packed, safety, design sensibility and street smarts into our products so you can take it easy on your next adventure
Features:
Specs:
Color | One Color |
Height | 14 Inches |
Length | 5.25 Inches |
Weight | 4.34 Pounds |
Width | 2.25 Inches |
Release date | January 2008 |
Size | One Size |
Number of items | 1 |
9. Receiver Hitch Spare Tire Mount Heavy Duty Truck Hitch Made in USA Steel Powder Coated U-4100
- Easily Adjust height
- Fits all 2" Receivers
- Simple installation or removal
- Made in USA PATENT PENDING
- Fits all 2 inch receivers
Features:
Specs:
Color | Black |
Height | 7 Inches |
Length | 14 Inches |
Weight | 11 Pounds |
Width | 0 Inches |
Size | Large |
Number of items | 1 |
10. EMS Offroad Tire Carrier Hinge
- Weld thru spindle
- Tire Carrier Hub
- Bearings and Seals
- Dust Cover
Features:
Specs:
Height | 50 Centimeters |
Length | 100 Centimeters |
Weight | 100 Kilograms |
Width | 100 Centimeters |
11. Teraflex HD Hinged Carrier and Accessory Mount Combo for Jeep Wrangler JK 2007-15 - Includes 4838100 & 4838200
- Includes Teraflex HD Hinged Tire Carrier and Accessory Mount.
- Carries up to a 37" tire.
- Lightweight aluminum - eliminates tailgate stress and rattles.
- Simple installation requires no drilling.
- Accessory mount accepts either a Hi-lift jack or RotopaX container.(Fits with up to a 37" tire)
Features:
12. Rigid Hitch in-Bed Spare Tire Bracket (RHTC-35L) - Made in U.S.A.
- Gets tire out from under truck
- New & Improved!! Universal - fits all brands of trucks
- Lockable - lock not included
- Black powder coat finish
- See technical specification below for installation instructions
Features:
13. EAG Steel Rear Bumper with Tire Carrier Fit for 1984-2001 Cherokee XJ
- FITMENT - Compatible with 1984-2001 Cherokee XJ
- TIRE CARRIER WITH EZ Grip LATCH HANDLE- Two-way adjustable tire mount for up to 37" tire for tire carrier. The EAG patent-pending EZ Grip latch handle is designed for easy opening/closing and rattle-free operation.
- RUGGED CONSTRUCTION - Manufactured from durable 5/32" steel sheet. High quality textured powder coat for corrosion protection and durability.
- OFF-ROAD COMPONENTS - 2" Class Ⅲ receiver hitch rated 5,000 lbs equipped with safety chain loops. Shackle mounts are welded onto the bumper from the inside and outside for maximum strength.
- INSTALLATION - Directly bolt-on.
Features:
Specs:
Height | 18.9 inches |
Length | 74.02 inches |
Weight | 170.97 pounds |
Width | 25.2 inches |
15. Dorman 47823 Spare Tire Hoist Cover Replacement for Select Chevrolet/GMC Models
- Direct replacement - this spare tire hoist lock cylinder tube matches the fit and function of the original equipment part
- Easy to install - no special tools required to install this spare tire hoist tube
- Durable materials - manufactured from sturdy materials for a reliable service life
- Quality fit - this spare tire hoist lock cylinder tube has been dimensionally tested to ensure accurate fit and function
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Features:
Specs:
Height | 3.15 Inches |
Length | 9 Inches |
Width | 3.15 Inches |
Number of items | 1 |
16. Extreme Max 3005.3732 Wall Mount Spare Tire Carrier for Enclosed Trailers,Silver
- Universal fit for most spare trailer tires
- Holds tire tight and flush against the inside wall of an enclosed trailer
- Aluminum-constructed bracket with zinc-plated steel bolts
- Contains two bolt lengths, 4" and 6", featuring an American 1/2" x 13 full thread
- Two-year warranty
Features:
Specs:
Color | Silver |
Height | 1.3 Inches |
Length | 11 Inches |
Weight | 0.5 Pounds |
Width | 4.3 Inches |
17. TeraFlex 4838150 JK/JKU Alpha Hinged Carrier & Alpha HD Adjustable Spare Tire Mounting Kit-Complete
Country of Origin: CHINAItem Package Weight: 20.82 kilogramsThe original HD Aluminum JK Tire CarrierPackage Dimension : 30.48 cms L x 40.64 cms W x 74.168 cms H
Specs:
Color | black |
Height | 11.5 Inches |
Length | 27.5 Inches |
Weight | 0.000625 Pounds |
Width | 15.5 Inches |
Release date | April 2017 |
Number of items | 1 |
18. GoJak ZENDEX Tool Model G6313, Wheel Dolly Pair (Left and Right)
HIGH QUALITY MATERIALS - The GoJak Wheel Dolly is extremely durable. The dolly is made from an all-steel construction with a high level of craftsmanship, ensuring long-lasting use.EASY TO USE - This car garage dolly uses double ball bearing nylon casters that will make moving your vehicle effortless...
Specs:
Height | 0 Inches |
Length | 0 Inches |
Weight | 93 Pounds |
Width | 0 Inches |
Number of items | 1 |
19. Fabtech FTT10002BK Angled Spare Tire Mount Kit (Angled Mount Only)
- Package Dimensions: 78.74 H x 35.56 L x 50.8 W (centimetres)
- Package Weight: 11.657 kilograms
- Fit type: Vehicle Specific
- Country of Origin : United States
Features:
Specs:
Height | 12.8 Inches |
Length | 30.4 Inches |
Weight | 23 Pounds |
Width | 20.4 Inches |
Number of items | 1 |
🎓 Reddit experts on spare tire carriers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where spare tire carriers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
So the hitch that I found sits comfortably behind the number and actually affects the exit angle very little if at all. I'll also be getting a 1 1/4 to 2 inch adapter that is technically only meant for class II hitches, but for only holding a spare tire, it will be fine. It's also fine for holding a bike rack or something. I'll edit this comment when I'm at my computer and show you what I'm getting
EDIT:
If all this metal that's bolted to your car is rattling around way too much because of the couple millimeters of play in the hitches, pick yourself up a couple of these and it's problem solved.
Hope this helps! If you want to know anything else, let me know
Edit 2: formatting
Have you looked into something like this? Or possibly something like This? These guys made the ideal carrier for cheap and fairly simple, but if you want to just outright buy one, there are ones like these:
http://www.cbioffroadfab.com/products/trail-accessories/fold-down-tire-carrier-premium-model/ (A lil pricey)
https://www.amazon.com/CURT-31006-Spare-Tire-Mount/dp/B0009YIE1O
All of them except the last one fold down so you can open your tailgate, which is nice. It doesn't look bad, keeps the roof free, the cargo open, and easy to move/access.
It’s difficult to find anything <$200. There’s the cheap Curt hitch on Amazon. Floats around $85 give or take.
I think it might look kind of derpy on a full size SUV but it would do the job.
Honestly, your best bet is probably to find a local machine shop and see if they would weld something up for you. I bet for $150 you could pay somebody with some time and talent to make something a bit nicer than the Curt hitch. Maybe it could at least swing downward for tailgate clearance.
Also, depending on where you are, keep an eye in FB marketplace and Craigslist. I see tire mounts pop up every once in a while.
Nice tire mounts are expensive for a reason. It takes a lot to keep a heavy, oversized tire from rattling around and making vibrations with thousands of miles of off road use and debris.
Not sure how fancy you wanna get with it, but I'm planning on using this hinge for the carrier, and this pin to keep it open on hills. I have yet to design my rear bumper, but I did the front one and it turned out pretty good. My advice would be to look at premade ones to find stuff you like and go from there. BleepinJeep has some newer videos where one of the guys builds a bumper for his diesel jeep, and a video assembling a diy rear bumper for a Comanche.
The more related research you can do the better. The best thing you can do for your wallet is mock things up in cardboard before going to steel. It allows you to see how things will look, gives you an idea of dimensions, and is a hell of a lot cheaper if you screw up. Also be sure to account for clearances of stuff like paint/bed liner, otherwils you'll have a he'll of a time trying to get it on and off.
Ya and the actual tire holder is plastic which could be broken pretty easily and they could deal with the locking cable later. I'm now thinking maybe something like this? It will keep them from being able to get at the nut at all but less obtrusive than the bolt you linked. Main positive I see with the bolt is that it can be matched to your vehicle key. The bolt sticks out so much that I think it would be in the way when I use my trasharoo.
Mine is in my hitch. I fabricated my own because I didn't like how bulky the other ones were.
I bought this fold-down adapter for my hitch and this Curt tire mount. Cut off the receiving end of the tire mount and then weld it into the adapter. It's pretty heavy but it's much more compact. You can’t mount the tire directly to that Curt mount so I used a couple of 2” wheel spacers and old lug nuts as my mounting hardware. My stock suspension started to sag immediately after putting it on so I have to add these Rallitek 1.4" lift overload rear springs to compensate for the extra weight. Once fully loaded, it handles better than it did with the stock suspension. I also need to figure out what to do about my license plate. Right now the spare blocks the original plate mount so I’ve got it zip-tied to the spare until I can figure out a better solution.
If I remember correctly, that tire carrier is actually a JK tire carrier. The guy I bought the Jeep from had modified it to fit the TJ
Edit: Here's one type of it http://www.amazon.com/Performance-Accessories-85207-Wrinkle-Carrier/dp/B0038UUEN2/ref=sr_1_38?ie=UTF8&amp;qid=1462486216&amp;sr=8-38&amp;keywords=jeep+tire+carrier I don't know it it's the same one, but a couple other companies make it as well, so you might be able to find something even cheaper.
A jack mount. Bolt it wherever is best for you. https://www.amazon.com/AUXMART-Mount-2007-2017-Wrangle-Off-Road/dp/B01LZLUKM2
I would say its fine. If your new wheels have different backspacing than stock, make sure you get longer isolators to keep it steady.
Something like this
Have a friend with a rack that fits right through the spare... will look it up in a moment.
I'm pretty sure hers was a Yakima, but there's some alternatives.
Hollywood Racks Bolt-On Spare Tire Rack, Black https://www.amazon.com/dp/B005Z17Q88/ref=cm_sw_r_cp_api_t85AzbNDGGMG3
Thule 963PRO Spare Me 2 Bike Spare Tire Bike Carrier https://www.amazon.com/dp/B009NN6MN4/ref=cm_sw_r_cp_api_185Azb3QTMPVA
Yakima SpareRide 2 Bike Carrier Rack https://www.amazon.com/dp/B01EUPLZ90/ref=cm_sw_r_cp_api_795Azb09J5R9J
I shelled out for the yakima spare tire holder. 100% recommend it, like everything else yakima makes, its over engineered and extremely high quality. But you gotta pay for it.
https://www.amazon.com/Yakima-Spare-Carrier-Cargo-Baskets/dp/B0012SAB30/ref=sr_1_1?ie=UTF8&amp;qid=1523273396&amp;sr=8-1&amp;keywords=yakima+spare+tire
If ok have a hitch on it you can buy an attachment for it that adds a mount for a rear tire. Receiver Hitch Spare Tire Mount Heavy Duty Truck Hitch Made in USA Steel Powder Coated U-4100 https://www.amazon.com/dp/B079M8QKX6/ref=cm_sw_r_cp_api_i_s6ZhDbKPB0M1S
Amazon. Got the spindle kit and i picked up the pull pin for about $60 total.
Spindle Kit
https://www.amazon.com/gp/product/B074Q2NY74/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Pull Pin
https://www.amazon.com/gp/product/B00GAZQJ0O/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Teraflex HD Hinged Carrier and Accessory Mount Combo for Jeep Wrangler JK 2007-15 - Includes Teraflex 4838100 & 4838200 https://www.amazon.com/dp/B00OU5AJFW/ref=cm_sw_r_cp_api_M0XEyb6AK2VHM
I bought it lifted, and I also don’t do serious off-roading. I just like to reach places to camp that a lot of people can’t.
Here’s a link: https://www.amazon.com/gp/aw/d/B07NPBYC65#Ask
Yeah been thinking the same thing. I have to get a full size and want a way to bed mount it too. We make some custom stuff.
Rigid Hitch in-Bed Spare Tire Bracket (RHTC-35L) - Made in U.S.A. https://www.amazon.com/dp/B017MJCUH2/ref=cm_sw_r_cp_apa_i_3x9ODb99EDEKE
something like this but better, right?
$285 on Amazon - https://www.amazon.com/Factory-Kia-Forte-Sedan-Spare/dp/B00HZPXVG8
Read the size off the sidewall, and put it in here: https://tires.tirerack.com/search?asug=&amp;view=list&amp;w=compact+spare
Then take it to your tire shop.
Year make and model ?
Without that info here’s at least some options
Dorman 47823 Spare Tire Hoist Cover Replacement for Select Chevrolet/GMC Models https://www.amazon.com/dp/B07VRYTHSP/ref=cm_sw_r_cp_api_i_jxoPDbD7D0X0P
Or just the cap.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F232997038184
I used these meant for spare trailer tires: https://www.amazon.com/dp/B01HHA48QW?ref=yo_pop_ma_swf
Get this and push her car down the road.
https://www.amazon.com/Teraflex-4838150-Aluminum-Carrier-Adjustable/dp/B00CI42LQC Found it!
Got you
$86
Curt Manufacturing 31006 Hitch-Mounted Spare Tire Mount Black https://www.amazon.com/dp/B0009YIE1O/ref=cm_sw_r_cp_api_i_VV4DCbXB29TTD
Huh. They weren't kidding. They're all over the place:
https://www.amazon.com/EAG-Bumper-Carrier-Receiver-Cherokee/dp/B07NPBYC65
First I've ever heard of them.
They need to start storing a set of Gojaks at locations like this. Just wheel the offending car out of the spot.
Go-Jak G6313 PAIR (one right and one left) https://www.amazon.com/dp/B00M0VPS0E/ref=cm_sw_r_cp_api_AhS.Bb5N3M2XE
Unfortunately, they aren't as cheap as you'd think for just some metal tubing. That said, it was necessary and it was the only one I could find. I got mine here:
http://www.amazon.com/Fabtech-FTT10002BK-Angled-Spare-Mount/dp/B000CMD3HI