Reddit mentions: The best tubing/hoses
We found 37 Reddit comments discussing the best tubing/hoses. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 16 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Camco (22484) Water Bandit -Connects Your Standard Water Hose To Various Water Sources - Lead Free
- Universal Fit: Connect your hose to most standard hoses with our water bandit hose connector; it works with damaged or stripped faucet threads and even faucets with no threads at all
- Durable and Sturdy: This hose-to-sink faucet adapter is 3.25 inches long and features a standard brass male water connection and a highly flexible silicone-polymer sleeve; perfect solution for leaky hose connections
- Easy Installation: Simple and quick to install, this water bandit hose connector for RV can be easily slipped over a damaged faucet while the threaded end is attached to the hose
- Low Lead Certified: Our hose-to-faucet adapter conforms to all federal and state-level low-lead laws; CSA low lead content certified to NSF/ANSI 372
- Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level
Features:
Specs:
Color | Blue |
Height | 1.2325 Inches |
Length | 7.1825 Inches |
Number of items | 1 |
Weight | 0.12 Pounds |
Width | 3.1875 Inches |
2. PTFE Teflon tubing 5ft- 2mm ID X 4mm OD for 1.75 Filament Bowden 3D Printer -Allen Tech PTFE Teflon Tube
- ID:2mm(0.079'')/OD:4mm(0.158''),Length:5ft.Material: PTFE(common name:Teflon).For 1.75 filament Bowden 3D Printer,Translucent
- Temperature range (Degree F):-454 to 500. Flame rating: UL-224 VW-1(UL-recognized). Density: 2.15-2.20 g/cm3.
- Excellent resistant to acids, alkali and all kinds of organic solvents: ASTM D543. High lubricating ability and non-stick
- Raw materials meet FDA requirements per FDA 21 CFR 177.1550 for use with food contact surfaces
- Excellent electric property and long life. Widely used in electronics, chemicals, medical and industrial
Features:
Specs:
Height | 0.393700787 Inches |
Length | 3.93700787 Inches |
Number of items | 1 |
Size | 5ft |
Width | 3.93700787 Inches |
3. Camco RhinoFLEX Clear 45 Degree RV Sewer Hose Swivel Fitting- Allows You to See When Tank is Empty, Odor Protection; Durable and Secure Connection (39847)
45 degree swivel fittingClear fitting to see if holding tank is emptySwivel lug and bayonet fitting for secure connectionUV stabilized resin for long lifeConnect sewer hose to your RV’s waste valve fitting
Specs:
Color | Clear |
Height | 6 Inches |
Length | 7 Inches |
Number of items | 1 |
Release date | February 2012 |
Size | One Size |
Width | 5 Inches |
4. Shower Head Hoses 98-Inch Extra-long for Handheld Shower Head Sprayer Hose Extension and Hand Held Showerhead Hose Replacement with Brass Nuts Stainless Steel Chrome
Specs:
Color | Chrome |
Height | 1 Inches |
Length | 1 Inches |
Width | 1 Inches |
5. xlshower XLSSH8FT shower hose, chrome
STAINLESS STEEL EXTERIOR: This hand held shower hose exterior is made from 18/8 stainless steel , with rubber gasket, ensuring durability and anti-corrosionEPDM INNER: Inner pipe made of EPDM material that can be used for baby shower hose, non-toxic and odorless, for high pressure and temp resistant...
Specs:
Color | Chrome |
Height | 1 Inches |
Length | 96 Inches |
Number of items | 1 |
Size | 96 inches |
Weight | 0.5 Pounds |
Width | 1 Inches |
7. Purelux Shower Head Hose 118 Inches (3 Meters or approx. 10 Feet) Extra Long Handheld Showerhead Extension, Universal Replacement Made of Stainless Steel Polished Chrome
Extra long shower hose, 118 inches or 10 feet.Standard connection fits most brands handheld showerhead of 1/2" connection.Quality double lock stainless steel outer tubing, ensure durability and anti-corrosion.Flexible and does not kink, good replacement.Solid brass connectors fit most shower fixture...
Specs:
Color | Chrome |
Height | 50 Millimeters |
Length | 240 Millimeters |
Size | 118" |
Weight | 500 Grams |
Width | 135 Millimeters |
8. Winterize Sprinkler Systems and Outdoor Faucets: Air Compressor Quick-Connect Plug To Female Garden Hose Faucet Blow Out Adapter (Lead-Free Brass)
- Adapter to easily winterize underground irrigation sprinkler systems, outdoor pipes, vacation homes, cabins, faucets, spigots, garden hoses, sillcocks, and hose bibbs by blow out method.
- Flexible hose allows the adapter to access tight spaces and minimizes stress on pipes and fittings. Pre-assembled length: 10 inches (approximate). Pressure rating: 250 psi. 100% outdoor rated, virtually indestructible, impervious to water and oil.
- Easily connects to air compressor and garden faucet to winterize lawn sprinkler systems, soaker hoses, drip irrigation systems, faucets, and plumbing to prevent damage due to freezing. Compatible with standard garden hose threading and air compressor quick-connect commonly found in North America.
- For your health and safety, all metal parts are solid lead-free brass which contains less than 0.25% lead. Always wear safety goggles when handling or using compressed air.
- This winterization tool is made from the highest quality parts. If you are looking for a heavy duty tool that lasts a lifetime, this one is for you! Assembled in Wichita, Kansas, USA using domestic and imported parts. Includes printed lawn sprinkler winterization instructions.
Features:
Specs:
Color | Brass |
Height | 1.1 Inches |
Length | 10.25 Inches |
Weight | 5.5 ounces |
Width | 1.1 Inches |
9. Watts SVEB20 Pre-Cut 1/4-Inch Diameter by 0.170-Inch Clear Vinyl Tubing, 20-Foot Length
- Pre-cut clear vinyl tubing
- 1/4-Inch OD x .170-Inch ID x 20 foot length
- Polyvinyl chloride is manufactured to exact specifications, which gives it the flexibility of rubber and the clarity of glass
- It handles a wide variety of chemicals, gas, and liquids, with excellent resistance to acids, alkalis, and many solvents
- Not for use with ice makers
Features:
Specs:
Color | Clear |
Number of items | 1 |
Size | 1/4-inch by 0.170-inch |
10. KES Stainless Steel 118-Inch Extra Long Shower Head Hose Bathroom Toilet Handheld Showerhead Sprayer Extension Replacement Part with BRASS Coupler, Polished Chrome, I3300
Stainless steel exterior: Exterior tubing is made from stainless steel, ensuring quality and longevityEpdm inner: Inner pipe made of non-toxic ordorless epdm material, high pressure resistanceSolid brass connector: Conical and hex connector are both constructed from brass, 1/2" ips, straight threads...
Specs:
Color | Chrome |
Height | 2 Inches |
Length | 10 Inches |
Weight | 0.8 Pounds |
Width | 5 Inches |
11. Dynabrade 13460 Db 13460 Dynisher Verskit
- DYNAMIC DYNABRADE DYNAFILE: Our belt tool is ideal for strap polishing and working in narrow openings. Use it to grind, deburr, blend, polish, finish, and more. Applicable on a variety of surfaces.
- VERSATILE PERFORMANCE: Handle design has 7 degree offset. Head pivots 360 degrees. Belt guard detaches with an adjustment knob. Converts to a die grinder with 1/4" Threaded Collet Insert (01644).
- CONTACT ARM INCLUDED: This tool has a Contact Arm (15026) and Drive Wheel (15118) for use with 1/2" wide by 12" belts, with more contact arms. Rubber Drive Wheel (40378) may be ordered separately.
- PNEUMATIC MOTOR: Air-powered motor runs at 0.4 hp, up to 25,000 RPM. The motor's pneumatic design ensures tool is lightweight, versatile, easier to maintain, and powerful. Rear exhaust diverts dust.
- PNEUMATIC MOTOR: Air-powered motor runs at 0.4 hp, up to 25,000 RPM. The motor's pneumatic design ensures tool is lightweight, versatile, easier to maintain, and powerful. Rear exhaust diverts dust.
Features:
Specs:
Number of items | 1 |
Weight | 1 Pounds |
12. Eastman 41065 Washing Machine Hoses, 5 Ft Pair, Silver
- UNIVERSAL WASHING MACHINE CONNECTOR: Washing machine hose adapter is designed to resist full flow and high pressure and provide a leak-free connection for your washing machine; features a working temperature of 15 degrees F to 158 degrees F
- WHAT IS INCLUDED: (2) washing machine hoses (1 hose for cold water and 1 hose for hot water), each measure 5 feet in length; washing machine hose fittings are equipped with a 3/4 inch Female Hose Thread (FHT) connection at each end
- CONSTRUCTION: Each washing machine hose coupler features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping; provides resistance to corrosion
- CERTIFIED: Washing machine hose hook up is intended for residential use only, CSA certified, and UPC approved
- EASY INSTALLATION: This flexible supply line features nickel-plated brass nuts with stainless steel ferrules for easy installation; each washing machine hose is color coded, blue for cold water and red for hot water
Features:
Specs:
Color | Silver |
Height | 2.1 Inches |
Length | 13 Inches |
Number of items | 1 |
Size | 5 Ft |
Weight | 1 Pounds |
Width | 9.15 Inches |
13. Sharkbite SS3086FLEX24LF Water Heater Connector, Push-To-Connect, Copper, PEX, CPVC Corrugated Stainless Steel Hose, 3/4 inch x 1 FIP inch FIP x 24 inch
INSTALLS IN SECONDS: Corrugated Flexible Water Heater Connector requires no special tools, no soldering, or glue. Just push to create a watertight sealPERFORMANCE: Rated to 200 PSI and 200 Degrees F. Use in potable water and hydronic heating applicationsVERSATILTY: SharkBite connects Copper, PEX, CP...
Specs:
Color | Stainless Steel |
Height | 1.75 Inches |
Length | 24 Inches |
Number of items | 1 |
Size | 3/4 inch x 1 FIP inch FIP x 24 inch |
Weight | 0.7 Pounds |
Width | 1.75 Inches |
14. Delta 75007 140 60-Inch Stainless Steel Replacement Hose, Chrome
- 60 inches in length
- One Conical and One Brass Hex Nut
- 1/2 inch connection
- Stainless steel finish
Features:
Specs:
Color | Chrome |
Height | 2 Inches |
Length | 12.75 Inches |
Number of items | 1 |
Weight | 0.3 Pounds |
Width | 6 Inches |
15. Camco 59883 5' Propane Appliance Extension Hose - 1/4" Male NPT x 1/4" Female NPT
- 5' high pressure hose
- 1/4" male NPT x 1/4" female NPT
- Provides an extension for portable propane appliances
- For use on a 20lb or 30lb refillabe propane tank
- Easy to use
Features:
Specs:
Color | Black |
Height | 7 Inches |
Length | 4 Inches |
Number of items | 1 |
Size | 5 meter |
Weight | 0.67 Pounds |
Width | 8 Inches |
16. Hand Bidet for Toilet Shower Set-Hand Held Bidet Sprayer Attachment in Bathroom-Stainless Steel Handheld Muslim Shower Kit for Fresh Water
Ergonomic and premium stainless steel hand shower head with adjustable water pressure lever-The stylish handheld bidet sprayer head is made of solid and corrosion free stainless steel for long lasting.Top premium Brass T valve core with brass and ceramic disk seals, Upgraded and advanced safe shut-o...
Specs:
Color | Brushed Nickel |
Height | 2.6 Inches |
Length | 8.6 Inches |
Weight | 1.65 Pounds |
Width | 6.3 Inches |
🎓 Reddit experts on tubing/hoses
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where tubing/hoses are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
i have a 150w in my 46 gallon and it barley keeps up, have to have it cranked to max (86 i think) to keep the tank at 78) I'm going to move up to a 200 soon, or probably just adding a second heater.
price difference is negligible between 150 and 200 for the most part.
I use this instead of the python adapter, half cost, same thing, add a $1 hose clamp if you want but you may not need it, the pressure doesn't get to high out of inside faucets honestly. You don't need the hook in all likelihood, I do my changes solo without the hook just fine.
If you want to save even more money, you can DIY the whole thing for cheaper as well, just search around on the youtube channel of a guy called king of DIY
Don't spend $26 on test strips, strips suck, spend $22 on the api liquid test kit, it will last longer anyway
the bacteria quick start is real hit or miss, all brands, so don't put too much faith in it, you'll still spend weeks cycling probably. remember to get a source of ammonia ($3 for a bottle, get pure stuff, without anything added, if you shake it and there are lasting bubbles, its not what you need)
plants get expensive FAST, so 150 for plants, decorations, fish is gonna be tough. Pool filter sand is great easy substrate though, so is black diamond blasting media if you prefer black, both are probably in the $10 range for enough to cover your tank to the proper depth. driftwood and nice rocks can add up fast.
/r/PlantedTank has a weekly giveaway thread but its not too filled ever, r/aquaswap can get you some good deals on plants too. aquabid.com is aquarium ebay and can get you some good deals too.
I just looked back up and saw you didn't actually say plants, but plants are cool and help your tank stay stable and healthy, you'll probably want some eventually. But you will probably want a better light for live plants as well. That can be down the road I guess.
If you are buying from petsmart, know that they will pricematch their own website, the instore prices are outrageous. Online has to at least compete with other places though, so have the products pulled up online on your phone when you check out. petsmart also has an app, make an account and play their dumb little treat game. Right now if you beat it on hard its 20% off a single item, which is great for your tank stand combo. Easy and medium gives you a 10 and a 15% off as well. Its a simple enough concept, but beating it on hard can suck, I definitely get the feeling it just lets you win after a while though (10ish tries, quit for a day and try again and you'll get it quick)
For stocking it, a couple dwarf gouramis if some kind, honey or powder blue or whatever you like. maybe a schooling fish like cardinal or neon tetras. mollys or platys are colorful and will breed, corys for the bottom. a nerite snail, play around on aqadvisor.com and see what you can safely stock together and the basic requirements. Dont take it as gospel, just a good baseline and jumping off point for more research.
Gotcha. A couple of "pointers" for you to consider: If you're 6'1" and your son is growing, make sure to check the bed size. Many trailer's beds aren't designed for taller folks and end up having to sleep diagonally. Silly as it sounds, buy a clear sewer hose fitting. (something like this https://www.amazon.com/Camco-39847-RhinoFLEX-Degree-Fitting/dp/B006OQ35GU), When you clear out your tanks, you can make sure it is flowing clear water out of your black tank. Budget for "other" camping items that you didn't use when you were car camping. Everything from 5 gallon water jugs, chocks, gas tanks, levelers are a start. Jumping to an RV involves more purchases than you will think of at first. If you're buying a used camper, make sure you have it professionally inspected. You'd be surprised what you can find out with an inspection. I'm at work so I'll try and add more if I can think of other tips for you!
No problem! A clarification to what u/Seppi449 said; I'm assuming they're actually talking about a hardened steel nozzle. This will allow the students to print with exotic filaments (wood fill, metal fill, glow in the dark, etc) without it damaging the soft brass nozzle. This upgrade is pretty cheap, and it will prevent constant replacements.
I personally would not recommend upgrading to an all metal hotend assembly. The uses for that are pretty small and they can cause a lot more issues for novice users, which I'm guessing many of the students are. When you get a new nozzle, make sure it doesn't specify it's for an all metal hotend. They are different and are not compatible.
You probably ought to also grab a bit of 2mm ID x 4mm OD teflon tubing. You need to replace the little bit of teflon tubing inside the hot end assembly periodically to help prevent jams and keep your printing smooth. The replacement piece is only about 1" long, so a roll like that will last forever. When you replace the existing tube, you want to make sure to keep the length as close to the original as possible, and keep your cuts 90º.
I hope this helps!
I am sure you are not the first person to do it.
At worst you could attach something ridged like galvanized pipe and then sheath it with a chrome cover.. it would have to be custom made.. but it will probably need to be supported really well .. probably from the ceiling or wall too... or
How about a 100" stainless shower head hose
https://www.amazon.com/Stainless-100-Inch-Showerhead-Extension-Replacement/dp/B00QBUG9K8
run that up there some how with a hook to the ceiling to support it.. idk
Have you tried using a lower mount for the shower head? I don’t know if you use a shower chair (I do), but if you do having the lower mount is really helpful for hair and means you have to maneuver the hose less. Something like this doesn’t require any “real” installation; it just replaces the original shower head so you can even use it in an apartment.
This is what it sounds like you’re looking for. It’s much longer and made of PVC. I don’t think it’s going to resolve the issue of twisting because I think that has just as much to do with the water pressure, but the length of the hose will make it much less of an issue.
This metal one is even longer, and is cheaper.
If it's not marked non-potable and doesn't have signs saying not to do that (some places have limited water), then yes. Just remember that other people may have done unsanitary things to the spigot, and recently I heard about a guy that found worms in one. I always run it first, look into it, then connect. A fill tube with a screen is a good idea also. I use this, and added a screen to it:
https://smile.amazon.com/gp/product/B0006IX850
​
A water bandit will help you connect to arbitrary water sources that don't have a normal screw connection, such as faucets at fish cleaning stations:
​
https://smile.amazon.com/Camco-Connects-Standard-Various-Sources/dp/B000EDOSKG
A bit of advice my friend: http://www.amazon.com/gp/product/B006OQ35GU?keywords=see%20through%20sewer%20elbow%20rv&qid=1458621948&ref_=sr_1_fkmr1_2&sr=8-2-fkmr1
It's isn't empty until it runs clear. Keep the chute closed until she's full, then open. Close again, fill with water, then flush one more time.
Not identical but works well:
Hose Bibb Mounting Plate https://www.amazon.com/dp/B008LX8FKK/ref=cm_sw_r_cp_api_xxp0AbJ1D6FT2
EDIT: Looks like you need something threaded?
And swap out the shower head hose it comes with for a 10 foot long hose and add a shutoff valve to make dog washing 1000% easier.
My large dogs like to cower at the far end of the tub during bathtime.
I think people use something like this. There are some dedicated adapter valves for this that you could put in your basement on the outgoing water line too.
Well depends I found this one fairly cheap on amazon and you can cut to length.
Amazon Link
I never really had to buy one but I’ve done research seeing if there were better alternatives but they all seem the same to me.
About your clog problem though instead of seeing if it’s a physical issue see if your retraction settings are maybe either too slow, too fast, or the distances are skewed and the optimal retraction is not happening.
The only gadget like thing i have that people might not know about, and im sure some people here would, is a water bandit.
Can you recommend any?
Will this barb & tubing be compatible?
-Barb:
http://www.amazon.com/Tru-Flate-21-123-Male-Hose-Fitting/dp/B000CFNVGS/ref=sr_1_2?ie=UTF8&qid=1369779764&sr=8-2&keywords=1%2F4+barb
-Tubing:
http://www.amazon.com/Watts-SVEB20-Pre-Cut-Diameter-0-170-Inch/dp/B0046ECKWC/ref=sr_1_3?ie=UTF8&qid=1369779659&sr=8-3&keywords=1%2F4+inch+tubing
maybe something like this would work for you, and then get a hose you can attach to it when you want to use it.
https://www.amazon.com/Camco-39847-RhinoFLEX-Degree-Fitting/dp/B006OQ35GU/ref=sr_1_fkmr0_3?ie=UTF8&qid=1485899520&sr=8-3-fkmr0&keywords=rv+sewer+elbow+see+through
So you will now the crapper is clean.
Check out water bandits for cases like this: http://www.amazon.com/Camco-22484-Water-Bandit/dp/B000EDOSKG/ref=sr_1_1?ie=UTF8&qid=1459265676&sr=8-1&keywords=water+bandit
> I used mine last weekend, since it was the first time I've been to a place that had a dump station that still had the end on the hose.
The spigot where the water comes out hook up to? This gizmo is awesome for those situations. https://www.amazon.com/Camco-22484-Water-Bandit-Lead/dp/B000EDOSKG
Now its up to you to figure out your ethical ground, but you can buy the tool you need to use those faucets.
You can also buy a thing called a water bandit that lets you hook up a length of hose to any faucet, even unthreaded. I will use it in gas station bathrooms to fill an aquatainer (with permission).
I built a dry box that I keep my PLA in and feed directly to the printer using PTFE tubing.
https://imgur.com/rrc30HL
https://imgur.com/ZxHDLQX
I used the threaded rod holders from this
https://www.thingiverse.com/thing:961881
And the Filament feeders from here
https://www.thingiverse.com/thing:1750875
I also keep one of these in there as well to keep it dry.
https://www.homedepot.com/p/Eva-Dry-4-6-oz-Mini-Dehumidifier-E-333/202847328
Also, I used this PTFE tubing for the runs from the box.
https://www.amazon.com/gp/product/B073RDFTDV/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Or this: https://www.amazon.com/gp/aw/d/B000EDOSKG
Also depending on what the faucet actually is like the may be a part of it that can be temporarily detached to reveal a part that is threaded after all.
Depending if there is enough left you can pull out the remaining, cut it clean and reinsert it. Otherwise you will need a new tube.
​
https://www.amazon.com/Teflon-tubing-Filament-Printer-Tech/dp/B073RDFTDV/ref=sr_1_5?keywords=bowden+tube&qid=1562686568&s=gateway&sr=8-5
First I'll grind the welds to a rough radius with this 7" disc grinder.
http://www.amazon.com/Dynabrade-52563-7-Inch-Right-Sander/dp/B0027S6FVQ/ref=sr_1_1?s=hi&ie=UTF8&qid=1464233102&sr=1-1&keywords=dynabrade+52563
This is what i use to grind the weld seems to a fine radius.
http://www.amazon.com/Dynabrade-15003-Mini-Dynafile-Abrasive-12-Inch/dp/B00065TOR4
This is what I use to put the brushed finish on the surfaces. How ever the stainless we use already has a grain, but ill use the tool to clean up any scratches.
http://www.amazon.com/Air-Finishing-Tool-Kit-2800/dp/B002LZSNB0/ref=sr_1_2?s=hi&ie=UTF8&qid=1464232796&sr=1-2&keywords=13450+Dynisher+Finishing+Tool
My machines are similar and the closet they are in do not allow the space needed for straight connections, I have 90 degree adapters on both the washer and dryer(for steam function), alternatively I think there are hoses available that have a 90 degree end on them, one less connection to worry about leaking, like these
AFAIK, the distinguishing characteristics of a current Mk10 nozzle are a 7x1mm thread and a 4mm bore. Performance 3D makes excellent nozzles and pretty much any generic brass Mk10 should work okay. There was an earlier rev nozzle that was for a 3mm OD x 2mm ID tubing and which had M6 threads. Only way to be sure is to measure but unless you have a fairly old FFC (e.g., laser cut case) it's probably the M7 & 4mm style.
For the PTFE tube, recommend buying a length of 4mm OD x 2mm ID PTFE tubing and cutting your own. Cheaper in the long run and you can cut it to the right length. When the PTFE tube is inserted inside the thermal barrier tube and nozzle there should be a narrow gap, about a fingernail's thickness, between the nozzle and tube. That ensures that the PTFE tube will fully seat once it's all assembled. One example of many.
Use a water bandit
https://www.amazon.com/Camco-22484-Water-Bandit/dp/B000EDOSKG/ref=pd_lpo_sbs_14_img_0?_encoding=UTF8&psc=1&refRID=13XCZCPCYBNSY4CKS00F
Around here the spigots are mostly threaded though I did buy one of these just in case.
Would this work?
https://www.amazon.ca/Sharkbite-SS3086FLEX24LF-Corrugated-Stainless-Connector/dp/B00NYO2BO2/
https://www.amazon.com/xlshower-XLSSH8FT-Stainless-Handheld-Shower/dp/B004XHYNEK
yep, I wish I could say for sure that this is like mine, but it's similar, and I have ZERO problems with mine kinking.
https://smile.amazon.com/75007-140-60-Inch-Stainless-Replacement/dp/B002YFXCOU/ref=sr_1_4?ie=UTF8&qid=1524584796&sr=8-4&keywords=metal+shower+hose
Homebrew Materials:
Vacuum Pump Oil
Vacuum Tubing
1/4" Barb x 1/4" NPT Male Hose Fitting
1/4" Male x 1/4" Female NPT Extension Hose
Vacuum Pump
Filters
Spatulas
Magnetic Stir Bar
Digital Hotplate with Magnetic Stirrer
Nitrile Gloves (Better than Latex)
Empty Capsules (Buy Separated unless you hate your life)
Capsule Machine (If you value your sanity, buy more than a 100... I hated my life doing this)
Mohr Pipets
Pipette 10ml
Mortar and Pestle (If you're doing orals, get this... Otherwise, you're playing Russian Roulette with your doses and liver)
Funnel (For pouring into small places)
Alconox (For clean your shit)
Temperature Gun (How hot is my shit?)
Graduated Cylinder (If you measure with beakers, you're a fucking idiot... And you should consider Volumetric Flasks)
Beaker Set
1 Liter Beaker (Because brewing en'masse is better)
Scale (I have a 2kg one, too)
Calibration Weight Set
Calibration Weight 100g (Because you need two for the scale linked)
Vacuum Regulator (Unless you want to filter 9001 times due to broken shit)
Oil (Any USP grade, filtered or unfitlered)
BB
BA
Butyl Stoppers
Flip Top Seals
Crimper
Vials (Unsealed)
Autoclave (Cheaper than an oven, why are you using an oven?!)
Weight Boats (Buy a million of these. They're cheap and useful)
Did I miss something? Probably. Yes.
When you shit, wash your ass with water. Toilet paper alone is just fucked up. Put a small hand shower on your toilet water line.
https://www.amazon.com/Set-Hand-Sprayer-Attachment-Bathroom-Stainless-Handheld/dp/B07CJZDD7V
If you want a full beard, shave everyday for one year. The more you shave the thicker it gets. Don't want a full beard? Don't shave often.