Reddit mentions: The best watch repair tools & kits
We found 611 Reddit comments discussing the best watch repair tools & kits. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 162 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. GGI 7 pcs Spring Bar Tool - Stainless Steel - Watch Repair Tool Kit for Watch Band Replacement and Pin Tool Set
- The most Established jewelry cleaner brand in the United States | Get the best diamond cleaner on the market from the global market leader in jewelry and silver care.
- Make your diamonds sparkle like new | This high-performance formula uses micro-fine cleansers and polishing agents combined with a polymer base to bring out that glistening, new diamond look.
- Reduces the appearance of fine scratches | With this specially formulated solution, the visibility of fine scrapes and blemishes in settings is greatly diminished over time.
- Easy, thorough cleansing | The soft-bristled brush is uniquely engineered for ease of cleansing behind diamonds and other precious stones and their mountings without stripping away delicate finishes on precious metals or damaging gemstones.
- Conveniently Portable | Throw it in your makeup bag to keep your diamonds dazzling everywhere you go. It’ll become just another one of your necessary travel accessories.
Features:
Specs:
Height | 4.72 Inches |
Length | 4.72 Inches |
Width | 4.72 Inches |
2. Polywatch Plastic Lens Scratch Remover
- Removes Scratches from Plastic Watch Crystals
Features:
Specs:
Color | Original version |
Height | 25.590551155 Inches |
Length | 5.118110231 Inches |
Weight | 4.40924524E-5 Pounds |
Width | 3.149606296 Inches |
Release date | February 2008 |
3. Bergeon 6767-F Watch Spring Bar Tool - Long Stainless Steel Handle with Replaceable Screw In Fine Tool End
Replaceable TipsSwiss MadeStainless SteelFine Fork
Specs:
Weight | 0.0771617917 Pounds |
Size | 148 mm |
4. PolyWatch 6417084129062 SS013059000 Plastic Watch Crystal Scratch Remover Polish Tool
- Professional results, also for deeper scratches
- Easy and quick application
Features:
Specs:
Color | Original version |
Height | 25.59 Inches |
Length | 5.12 Inches |
Weight | 0.01 Pounds |
Width | 3.15 Inches |
5. Ohuhu 174 PCS Watch Repair Tool Kit, Case Opener Spring Bar Watch Band Link Tool Set With Carrying Bag, Replace Watch Battery Helper Multifunctional Tools With User Manual For Beginner
MULTIFUNCTIONAL: Perfect for opening watch backs, watchband adjustment, changing watch batteries, gaskets, adjusting bands etcSELF RELIANCE: Small, clean and functional, this watch repair tool kit helps you get your watch problem done at home instead of going for watch repair shopsSTURDY and DURABLE...
Specs:
Height | 4 Inches |
Length | 8.3 Inches |
Weight | 1.4 Pounds |
Width | 2 Inches |
Release date | November 2014 |
Size | 174 PCS |
Number of items | 1 |
6. SE 5-Piece Watch Band Link Remover - JT6218
(1) Dual head hammer: metal and nylon(1) Watch band holder, 2” x 2”(3) Pin punches: 0.8 mm, 0.9 mm, and 1.0 mmLength of hammer: 8”Length of pin punches: 2”
Specs:
Height | 1.3 Inches |
Length | 3.5 Inches |
Weight | 0.02 Pounds |
Width | 3.1 Inches |
Size | 5-Piece |
Number of items | 1 |
7. SE 16-Piece Watch Repair Tool Kit - JT6221
- Watch strap holding block, pin remover, tweezers
- Mini long nose pliers, 3 pin punches, small hammer
- Watch case wrench, watch case knife, pin pusher
- 2 mini Phillips screwdrivers, 3 precision slotted screwdrivers
- Great for hobbyists, repairmen, watchmakers, and more
Features:
Specs:
Color | Multi Colors |
Height | 1 Inches |
Length | 11 Inches |
Weight | 0.99 Pounds |
Width | 7 Inches |
Size | 16-Piece |
8. EFIXTK Spring Bar Tool Set with Extra 6 Tips Pins for Watch Wrist Bands Strap Removal Repair Fix Kit,72PCS Extra Watch Pins
- 80 in 1 EFIXTK Watch Band Strap Revomer Repair Kit,Easy for removing and inserting spring bars straps
- Package includes,1 X Spring Bar Tool,6 Extra Tips,72PCS Watch Pins,1 X Tweezers,
- Suitable for watch band strap replacement, watch repair, jewelry making
- Comes with 6 extra tips,72 Extra 1.5mm in diameter watch pins in box,18-25MM 18 sizes,4pcs of each size
- EFIXTK Retail box with instructions,1PCS extra tweezers is convenient to pinch the spring watch pins
Features:
Specs:
Weight | 0.13 Pounds |
9. Vastar Watch Repair Kit Professional Spring Bar Tool Set, Watch Band Link Pin Tool Set with Carrying Case
This high quality 147 pcs watch repair tool kit suit for both professional and general use, solutions for most watch repair requirementsPerfect set for very common tasks like opening watch backs, watchband adjustment, changing watch batteries, gaskets, adjusting bands and moreSmall, clean and functi...
Specs:
Height | 1.9 Inches |
Length | 8.98 Inches |
Weight | 0.98 Pounds |
Width | 4.3 Inches |
Size | Medium |
Number of items | 1 |
10. Zacro Watch Band Strap Link Pin Remover Repair Tool Kit for Watchmakers with Pack of 3 Extra Pins
- Durable material:This watch band link remover is made of metal.
- Small size: Product Size: approximately 7.0 x 2.5 x 2.5cm / 2.76 x 0.98 x 0.98in.
- Large function: This tool can adjust the width of watch band up to size 30mm.
- Easy to use: You can adjust your watch band with this small and simple tool effectively.
- Colocation: equipped with six pins for replacement.Tips: The pins are too slim and easy to bend, pls be careful while using.
Features:
Specs:
Color | Silver |
Height | 1.2 Inches |
Length | 7 Inches |
Weight | 0.1 Pounds |
Width | 3.8 Inches |
11. Watch Hand Presto Presser Lifter Puller Plunger Remover set Fitting Repair Tools
Good quality tool for fitting or pressing watch hands onto a watch.Center plunger of the watch hands lifter holds the hands firmly in place.Precise and accurate plunger style to remove watch hands with ease, easy to use.Plastic tips will not scratch watch hands and dials. Easily hold watch dial to p...
Specs:
Height | 0.2 Inches |
Length | 2.1 Inches |
Weight | 0.02 Pounds |
Width | 0.22 Inches |
12. SWISS REIMAGINED Quick Release Spring Bar with Cylindrical Push Button for Watch Band (Set of Two) - 22mm x 1.8mm
- PREMIUM SPRING BARS FOR ATTACHING WATCH BAND WITH YOUR CASE OR BUCKLE - the Spring Bar Body is Manufactured from 316L Stainless Steel and the Spring is Manufactured in Tempered 304 Stainless Steel
- EXACT AND SECURED FIT - These Spring Bars are 1.8mm in Diameter at Their Widest Point and Designed to Fit a Watch or Buckle Where the Measurement Between the Band Attachment Lugs is 22mm - This Will Ensure Sufficient Tension In The Spring To Hold Your Watch Band to Your Watch Securely
- ATTACH/DETACH WITH EASE - Specialized for Quick Release Spring Bar Pins - Can Only Be Used With Specifically Designed Watch Bands - Ensure Your Strap Is Suitable For These Spring Bars
- PRECISE MEASRUEMENTS - The Pin Ends are 0.8mm in Diameter and Provided They are Installed Correctly Will be Locked In Place Between the Watch Lugs or Buckle Lugs with Approximately 4.4 Newtons or 1 Pound of Force Through the Tension in The Spring
- VARIOUS SIZES TO CHOOSE FROM - Cylindrical Push Button Lever at One End for Easy Installation and Removal of your Watch Bands - Not Sure of the Size You Need - The Lug Measurement Tool by SWISS REIMAGINED (ASIN:B00RT0D32Q) Will Provide The Answer
Features:
Specs:
Color | Stainless Steel |
Height | 0.09842519675 Inches |
Length | 3.93700787 Inches |
Weight | 0.0220462262 Pounds |
Width | 2.755905509 Inches |
Size | 22mm |
13. Vastar Watch Adjustable Opener Back Case Press Closer Remover Repair Watchmaker Tool and Watch Case Back Opener Repair Remover Holder Tool
- Professional Watch Back Remover Tool : High quality of Vastar Watch Back Case Opener and Watch Holder can easily remove the back cover. Save your time and money.
- Adjustable tempered pins for easy use on water resistant cases.Easy to operate. This watch back case opener is only suitable for the watch cover that is opened by rotating, not for other watch types that open the watch cover.
- Vastar Watch Holder: The watch case holder tool with 4 hard adjustable plastic pins will minimize the risk of slipping and scratching.
- Apply to Different Watches Types: Vastar Watch Adjustable Opener can be used for different sizes and different types of watches, no longer need to worry about replacing the battery.The applicable range of the watch back case opener is 15-60mm.
- Updated Appearance: The perfect professional tool set for watch repairing, Note: The appearance of watch back base opener has been updated.Tool is for screw-in casebacks. Please carefully distinguish whether the back cover of the watch is a screw type.
Features:
Specs:
Height | 2 Inches |
Length | 6.5 Inches |
Weight | 0.25 Pounds |
Width | 5 Inches |
14. Watch Case Opening Ball, 2-1/2 Inches | CWR-779.00
Great for opening watch casesMade in Hong KongBlue friction ballWon't leave marks on watch cases2-1/2 inches in diameter
Specs:
Weight | 0.05 Pounds |
15. EZTool Watch Repair Kit with 16 Tools and 41-Page Illustrated Maintenance & Service Manual
- USE OUR 41 PAGE, ILLUSTRATED GUIDEBOOK to get it right first time; With 65 step by step photos to guide you through watch battery changes, watch band resizing, caseback opening, strap sizing, bracelet adjustments, gasket replacement and all other common watchmaking tasks
- THIS DELUXE SET HAS ALL THE TOOLS YOU'LL EVER NEED: 3 point jaxa case wrench opener (extra large), link remover tool, 3x pin punch, hammer, pliers, spring bar removal tool, band holder, 5x screwdriver (philips + regular), tweezers & case pry
- NEVER PAY PRICEY WATCHMAKER FEES AGAIN: Fix it yourself; With this universal set of watch accessories and tools you'll be fixing watches like a pro watchmaker in no time
- EASILY OPEN REGULAR & OVERSIZED WATCHES: The extra large (XL) case wrench opens right up to 58mm; Ideal for professional or home use; Tools are beautifully presented in a smart, branded, zip-up case, it makes the perfect gift for any watch-lover
- OUR 100 DAY (RISK FREE) REPLACEMENT WARRANTY guarantees every purchase (with claim details conveniently contained within product); Buy with confidence; Our knowledgeable customer service team are permanently on hand. This kit's a winner every TIME
Features:
16. SE Watch Case Back Opener - HN7
- Length: 4.5”
- Stainless steel
- Precise sharp edge
- Handle comes in black, blue, silver or orange (no color choice)
- Great for professional watch repairers, watchmakers, and everyday users to open watch cases
Features:
Specs:
Color | Orange |
Height | 0.2 Inches |
Length | 5.1 Inches |
Width | 1 Inches |
Number of items | 1 |
17. SWISS REIMAGINED 5 pc. Precision Screwdriver Set - for Watch Repair and Bracelet - w/ 5 Extra Blades
- COMPLETE SET OF ESSENTIAL TOOLS - 5 Piece Precision Flat Screwdriver Set with Knurled Jeweler’s Handles with Freely Rotating (Spinner) Handle Cap and 7.5cm (3 inch) Handles that Allows the Application of Pressure with the Palm While Turning the Driver
- COLOR COORDINATED SCREWDIVER: Comes in Different Sizes: 0.80 mm, 1.00 mm, 1.20 mm, 1.40mm & 1.60 mm
- AN OUTSTANDING REPAIR TOOL FROM SWISS REIMAGINED - Comes with Professional Quality Tempered Steel Blades with a Spare Set of Blades Included With Every Set of Precision Screwdrivers
- VERSATILE EQUIPMENT AND MULTI FUNCTIONAL - Handy Set for Watch Repair, Watch Battery Replacement, Remove Watch Bracelet Screw Links, Eye Glasses Repair, Jewelry Work and Electronics Repair
Features:
Specs:
Weight | 0.1322773572 Pounds |
18. Watch Case Press with Nylon Dies
- Can be Mounted Desk or Work Bench
- Made of cast metal to ensure strength
- Watch Case Back and Crystal Press 12 Nylon Dies
- Snap-on Watch Backs and Install Flat Glass Crystals
- Straight wall nylon dies will not scratch or mar crystals
Features:
Specs:
Height | 7 Inches |
Length | 3 Inches |
Width | 6 Inches |
Release date | November 2011 |
Number of items | 1 |
19. Watch Repair Kit, Eventronic Professional Spring Bar Tool Set Watch Band Link Pin Tool Set with Carrying Case
High quality and professional watch repair tool kit, solutions for most watch repair requirementsMetal watch band link remover, more professional watch spring bar tool ,anti-magnetic screwdrivers, and other top tools, more choice for fun to repair your watchTwo watchband repair tools, you can choose...
Specs:
Color | Black |
20. Barton Spring Bar Tool - for Watch Pin Removal and Band Replacement
MULTI PURPOSE: One end is shaped to grasp spring bar from interior side of lug.The other end is shaped to push end of spring bar if accessible from exterior side of lug.SPARES INCLUDED: Comes with two extra tips (one of each type).INTEGRATED RULER: Metric ruler (mm and cm) engraved on side to help m...
🎓 Reddit experts on watch repair tools & kits
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where watch repair tools & kits are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
A good place to get started is by watching videos on YouTube. There are several 25+ minute long videos of people disassembling, servicing, and reassembling pocket watches. Once you have watched some videos, then you can start google searching about watch repair for more information. Things such as how to properly oil a watch. The names of different components, how to put a watch "in beat", etc. The message boards at NAWCC.com are a GREAT help. Read, read, read. Study. If after you do this and still want to get into the hobby then read further. I have to note that you must be mechanically adept to do this. You'll need to be able to observe a mechanism and deduce exactly how it works. This is how you solve a problem that a timepiece may have.
Honestly, a lot of the "Getting started" guides out there recommend spending thousands of dollars on tools. 30 dollars for one single screwdriver, 300 dollars for this, that, etc. If you're wealthy, then go for it! The expensive tools are great, but it's not necessary to service movements that are worth less than a couple hundred bucks for hobby. I'm very financially poor, so I had to shop around for the least expensive tools I could find. Here are some of the tools I use. I did purchase them from amazon. You won't be able to do all repairs with these tools. There are repairs that will be a bit out of reach, such as balance staff replacement and component fabrications.
1)Screwdriver set. I get a ton of use out of these. They're Chinese made, but they work perfectly fine. Definitely a must.
http://www.amazon.com/gp/product/B00JPXW0N8/
2) Magnifying eyeglasses. LED illuminated. I cannot live without mine, it really works great and takes regular AAA batteries. Human hands are capable of very fine motor movements, what limits us is our eyes. Watchmaking requires steady hands, and for that you'll need to see up close.
http://www.amazon.com/gp/product/B003UCODIA/
3)Movement holder. This is self explanatory.
http://www.amazon.com/gp/product/B005URKGDO/
4)Brass tweezers. You will need these to insert screws for installation, various pins, etc. Brass is a softer metal, and thus makes it less prone to scratch/damage steel parts such as the threads of screws. Learning to use tweezers can be quite difficult at first. You need to be very light fingered with them. Too much pressure, and your teeny tiny screw/pin/jewel will go flying across the room never to be seen again. Too little pressure, and you will drop the component. It takes practice.
http://www.amazon.com/gp/product/B000RB7C5I/
5)Hand remover. Self explanatory.
http://www.amazon.com/gp/product/B00I02NW82/
6)Watch oil. I use this Liberty brand oil. Seems to do the job just fine, and it's affordable.
http://www.amazon.com/gp/product/B00CM19L5K/
7) Dremel. Harbor Freight sells a knockoff brand dremel for something like 10 bucks. It comes with several attachments. I mostly use mine for buffing cases.
8) Jewelry pliers. They sell these in craft stores and such. Basically a pair of needle nose pliers without teeth on them, they just have smooth round points. These come in handy for removing pins and canon pinions and such that the brass tweezers cannot remove.
9) Several clean cotton cloths. I buy mine at the automotive department in walmart.
10) Goof-Off cleaning solution and a toothbrush. Goof-Off contains a mixture of acetone and xylene. This works great for removing old oil, gunk, and dirt.
11) Toothpicks and a sharp knife. Wood toothpicks work great for pegging/cleaning out jewels and pivots. Sharpen the tip of a toothpick, insert it in said jewel, spin it around a bit, it'll come out gray. Then clean with the chemical solution.
Now you'll want a watch or two to work on. I highly recommend sticking with an 18 size or 16 size movement at first. Larger parts and such makes it easier. You'll be able to find them on eBay. Generally I can find good size 18 movements for 30 to 50 dollars. Sometimes it's a good idea to buy a watch that already runs, but needs fully disassembled and cleaned. That 1898 Hampden 18s 11j in my photo album? I paid $30 for it in an eBay auction. It needed fully disassembled, cleaned, lubricated, mainspring replacement, and the balance put in beat. I knew that if it had a problem which I could not cheaply repair then I could simply resell it and get my $30 or more back. Often times you'll be able to buy entire lots of uncased scrap movements for less than 50 dollars. Having a lot of scrap parts movements around comes very much in handy. Stay away from watches with broken balance staffs for now. If you buy a broken watch that cannot be repaired cheaply, simply resell it on eBay.
Take A LOT of photos while you tear down a watch! Before you start removing screws, take photos on your cell phone. This will help immensely with reassembly.
That's all I can think of now. Getting a bit sleepy so I'm sure I'll think up some more advice tomorrow. I hope watchmaking is still enticing to you after watching some youtube videos, it really is a most rewarding hobby.
Holben's for European brands like Colareb, Fluco, Di-modell, Bonetto Cinturini, Eulit, etc. Colareb leather is super soft and comfortable, but lack any kind of splash resistance. Fluco does some really good suede. Di-modell has some great water-resistance leather options. Bonetto Cinturini is one of the most recommended for rubber straps, along with Watchgecko, which actually get their straps made by Bonetto Cinturini. Eulit is the most recommended for perlon.
Some of Hirsch's entry-level models are in your budget.
Barton is a great affordable option and comes with convenient quick-release spring bars.
Panatime has a lot of stuff, but the highlight is probably that they carry RIOS1931, which is a nice german brand.
Cheapestnatostraps is probably the most budget option, but their QC and lack of consistency is kind of iffy in my experience.
watch band center has a huge selection, though I don't really have any experience with them.
Crown and Buckle is pretty popular, though I only have experience with their natos, so I can't really comment on the quality of their leather
Clockwork Synergy is a budget option with quick-release spring bars like Barton. Clockwork Synergy's leather is really soft, but it's also weirdly spongy, which I don't like, though that's more of a personal preference on my part, maybe you'd like it.
B&R bands is mostly out of your budget, but worth a mention for their quality. The only knock against them that I have is their aggressive taper might not suit certain watches.
Etsy is a great place to get custom handmade straps made to your specifications; some of the strapmakers on etsy offer premium leathers like alligator or shell cordovan at cheaper prices than the big box strapmakers.
if you need a spring bar tool, I recommend the Bergeon 6767-F with the fine forked tip. Cheaper spring bar tools with the wider forked tips might not be small enough to remove the bracelet on your Citizen.
do you know when the watch was serviced last? it might need a servicing (which can be quite expensive) before you want to wind it too much.
you wind the crown clockwise (away from you) and its all done by feel. it'll wind freely for quite a few turns, then you will start to feel it get tighter and tighter. when I had a hand winder, I would wind it very gently, using a soft grip of the crown, and eventually I'd "hit a wall" and my fingers would slip off the crown. this is fully wound. it took me like 40 winds to get there. so, now that I knew how many winds it took, I wanted to find out the power reserve. once I knew that, I could fairly accurately predict when I'd "hit the wall" again....I would just stop winding like 5 turns before that and I'd be good.
whatever you do, NEVER give it a wind if you feel resistance. it should be fairly smooth all the way until it's fully wound.
as for the glass, it might by acrylic (plastic) in which case a tube of Polywatch should take out most scratches. you say it's damaged, but unless its chipped or cracked, you still have hope of restoring it for cheap.
I'm no expert on vintage Timex's, but it looks like a Marlin. but then again, all vintage hand winders look like a Marlin to me :)
it looks like it's on a Rally strap (big holes in it) which doesn't fit the watch IMO. I'd throw it on a Croco leather, or just a regular smooth leather strap. I've been happy with clockwork synergy leather straps. the dapper and gentleman collection are great, but the leather is quite thick.....might look weird with the svelt lugs that watch has. but their croco leather is nice from what I've heard and should fit much nicer. you can use code CWSSMR for 10% off too.
I bought all my materials from Amazon and I've done about 3 Mods.
Heres a little documentation of my 1st one.
Seiko 5 Mod; PAM Cali Dial & Sword Hands & some more photos
Some things that I suggest you get before starting.
Let me know if you've any questions, I'd be willing to help you out and answer them to the best of my ability :)
Cheers!
Deleted my other post on this as I figured everyone would rather see the pics than a link to the band...
I originally assumed I'd do the stainless band since I have the stainless/silver 360 but have to say the grey leather strap really grew on me while I was trying to figure out what kind of metal bands were out there that'd work.
If it wasn't for the lack of a easier to remove clasp on the leather strap that came with the 360, I might have even kept it on there.
I found after a full day of wearing the leather band though that moisture was getting stuck under the watch due to sweat and hand washing.
Since the leather strap is to much of a pain to quickly remove every time I washed my hands, I'd just not bother.
With the metal band, the quick release clasp on the bottom makes it very quick to remove/loosen the watch to dry under there after each hand washing now.
Here's the matte black version
Here's the stainless steel verson
You'll need to either use the spring bars/pins that came with the watch or buy some like these.
Best Buy also sells the same Pebble Steel bands for the same price as Amazon which is where I got mine from.
Some tips with removal and install. The spring bar/pin holes in the Moto 360 are made from plastic. Be extra careful with removal and putting the new ones back in. If you misshapen or break those holes, you're screwed.
If you don't have a proper spring bar tool like this, you'll need a jewelers sized flathead screw driver.
Getting the existing bands out is the easy part, I found putting the new band back in with the spring bars that came with the leather strap to be a lot more tricky in the metal band. I found the best way was to try and compress the springs on both ends of the bar and go straight into the opening. If you try to put one side of the spring bar in first then compress the other side, it didn't want to fit.
I enlisted my wife with her tiny little hands to assist and it made things a lot easier :P
If anyone has any questions, feel free to ask.
Both the watches are capable of having a NATO band on them. Personally, I think that the classic silver T2H281 would look best with a wider variety of NATO bands. It's also kind of the watch I like more in general of the two, so I could be a little biased.
You are going to want to buy a tool to remove the spring bars in the band/strap which hold the strap to the lugs of the watch. Different watches have different lug width. Both of the watches you were looking at where 18 mm lug width, so you are going to want to order an 18 mm NATO band to accompany, along with your spring bar tool.
AND since I am being extra nice today I went ahead and showed you what a NATO strap entails and how to put it on.
Step One: remove the strap with the spring bar tool.
Step Two: notice the spring bar within the strap, remove this and place back in between watch lugs.
Step Three: The watch should now look like this after the spring bars are put back on, lay out the NATO strap next to it exactly like so.
Step Four: Weave through the watch spring bars like so, and then weave the main band through the metal bar I am holding in order to secure the watch to the NATO band.
Step Five: End result with complimentary wrist shot, showing the spring bar tool and leather band I removed (which I happen to often wear). Loop excess strap through the bars on the NATO strap like pictured.
Good luck my friend, Cheers!
Nice pickup, I'm in the market for a affordable Bauhaus-styled watch.
I believe this watch has a 20mm lug width, so here we go.
For NATO straps, I think a blue and white stripe one will suffice, but you can look here to see what you might fancy. $13 here.
If you want something similar to a NATO but more 'dressy', you can buy a perlon strap. Search for Eulit on eBay.
By 'link', I don't know if you mean like a metal bracelet, but if you want to achieve something like this (not my photo), then you can buy something similar here for $10. If you want, you can spend more to get better quality, but this one gets the job/look accomplished.
For leather, I think any kind and color goes well. Recommended bands are Hadley Roma, Panatime, and Hirsch if you want to spend a bit more.
Don't forget a spring bar tool to switch out the straps, option 1 and option 2.
Hope this helps and welcome to the watch world! Post pics once you find something.
It’s not terribly hard but it’s very sensitive to movement. The first move I made, the watch went from -12ish to +230ish and I was like “uh oh.” I felt like I had only moved the arm a fraction of a millimeter. So I went back and forth going from +230 to -180 to +80 to -140 to +30 etc. until I was just tapping on the arm to make adjustments.
If I was to do it gain I would definitely get some type of magnification to help see how much I was moving the arm. Probably a watchmaker’s loupe.
I recommend watching watch regulation videos on YouTube to get an understanding of what to move.
I bought this tool kit not just to regulate the watch but to also adjust the bracelet myself, it’s the only way to get a perfect fit.
If you want to go for the original look, I believe that the Big Zero crystals were flat-topped, so they were more cylindrical than domed. You can typically find that style on ebay if you search for "Big Zero Crystal" (here, for example). It's not a horribly common style, so I doubt that most watchmakers would have one.
Alternatively, a standard domed crystal would also work. A local watchmaker might have one in stock in the right size (or could certainly order one if they don't have it); you can also get them at Esslingers.com. Getting the right size can be tricky, though; I don't know what size crystal it takes (the ebay link above says 35.5mm, FWIW). You can get a cheap caliper to measure the opening, but the crystal needs to be slightly larger than the opening (as it need to be compressed when it is installed).
Acrylic crystals can be a bit tricky to install (if you do it yourself). Ideally, you'll want to use an actual crystal insertion tool, but they aren't particularly cheap. The cheaper alternative is a crystal lift. I'm not a huge fan of the lifts, as they seem to be best for scratching and/or breaking crystals, but some others have had better luck. If you're just looking to have this single crystal installed, you will probably want to have a watchmaker do it; if you want the original look, buy a crystal on ebay to supply to them, and if not, let them supply a domed crystal for you.
I'd also recommend that you pick up a tube of polywatch from Amazon; it is fantastic for taking out light to medium scratches.
A lot of people recommend the regular Weekenders but they tick really loudly. They look great and are worth their price but the tick bothers me.
The best watches I've found for under $100 are:
Seiko 5 in your preferred color
Casio MDV Diver
Timex Weekender Chrono (Doesn't tick loudly)
If you choose one of these it's really easy to switch out the strap with one of these (spring bar tool)
I own all three of these watches and they are great. You can also check out different straps on Amazon or sites like cheapestnatostraps.
and a cheap plug for /r/Watches
The one I linked to comes with a green NATO strap, but the watch is available in a wide variety of straps. Changing straps is not hard. Just make sure to get the right size, the Weekender uses standard 20mm straps. Here is a video that shows how it is done. A tool like this is a great help. Some straps have a "quick release" feature, which makes it super easy to change them without any tools. Here's a video that demonstrates the how quick release straps work.
Here are some things to consider before buying and installing a strap :)
I am a huge fan of amazon for basic tools and even some straps. For NATOs I like to use www.natostrapsco.com as they have competitive pricing, great CS, free (USPS) shipping, and almost always have an extra 10-15% code on their facebook page. Their leather NATOs are very nice as well.
Here's a pic of a new strap I put on my Pulsar:
https://dl.dropboxusercontent.com/u/6742429/2015-01-12%2011.59.20.jpg
Current tools in the box
From Amazon:
​
Also, this is the walkthrough video I used for reference when changing the movement.
​
Happy Modding!
Monowear's metal band ($80) will allow you to add links lengthening it to accommodate wrists up to 257 mm. I believe the extra links come with the band and do not need to be ordered extra, but I'm not certain. But you have to buy a tool to add links separately. There is a kit on Amazon for under $10.
I was about to buy it when I saw a YouTube comment that its width is better designed for the 38 mm and it looks too narrow with the 42. Not sure how much faith I should put in a random comment, but it gives me pause when $80 is on the line.
Would love to know how it looks if anyone here gets one.
Update: I went ahead and ordered it. The black looks really nice. Extra links are free; you just have to send customer service an email requesting them after you submit your order.
Alright - with all of those things considered...here is my advice. This Seiko 5 is well within your price range and can work in both casual and professional settings. I have one myself, and it's much better looking in person than in the stock photos. Additionally, at only 38mm wide and 11mm thick, it is quite small and won't look big on your wrist (I don't know your measurement, but you should be good). Now, you said you like leather - I suggest putting this hadley-roma strap on it. You may need a spring bar set to help you out, but it's really easy. These three purchases will still put you in at around $50 under budget and a sweet looking wrist piece. Also, if you're looking for what the final product will look like, here is mine with the exact same set up
That's really awesome. I can relate to this pretty strongly since my father collects watches and got me into them as well. His piece of choice for every day wear when I was a kid was a Submariner that he still uses - maybe one day it'll be mine too! :D
What you mentioned about the clasps feeling cheap is quite true. If I understand correctly, for a long time it was more-or-less a trademark of Rolex, despite how counter-intuitive that may seem. More modern Rolex pieces have machined (as opposed to stamped) clasps which feel much more solid and less cheap.
As far as scratches, you can buff out a lot of the ones on the crystal with polywatch. Here's a link: http://www.amazon.com/Polywatch-Plastic-Lens-Scratch-Remover/dp/B0014R9V9O
I'm sure I don't need to tell you, but enjoy the piece and take good care of it!
I size all of my bracelets myself, and I've never damaged any of my watches in doing so. Pick up a pin pusher off of amazon or the like, something you can use to press the pins back into the links, something to release the spring bar in the clasp, and a spudger to get it back in. You can also buy a repair kit for under 20 bucks which has everything you need. Just go slow and don't force things and it'll be fine.
As for straps, I put mine on a red-accented bond style nato, which I absolutely love it on. I've also seen it on leather racing straps, or just plain old leather. The one thing I would caution you about is buying thick natos for this watch. The lugs are super short, so really only the thinnest of natos fit, and even then just barely. Great watch!
i did the same thing and needed extra links. i contacted motorola and they were pretty good about sending me extra links. while you are at it i would ask them to send the plastic end pieces that attach the band to the watch. these can crack. if you have to add links you may want to get a tool off of amazon that will help you with this. also this tool can help getting the spring bars off and on.
fyi, in order to get these parts you will most likely need to give them the watch's ime number (serial number) so i'm not sure you can preemptively start the process with them.
initially i called them after normal business hours and got support from a foreign call center. this was kind of "iffy" so i sent a follow up email. the email correspondence went well.
also, being that the band was too small, i could tell that the previous owner removed a link, i contacted the ebay seller asking for extra links (initially). they responded that they did not have them and offered a refund or a discount. i think there are different vendors selling the refurb moto 360 1st gen so ymmv.
good luck.
Happy to help!
Generally, most bracelets on watches can be easily swapped out unless they're integrated into the case or have an uncommon size or shape. Keep in mind though, you will need a spring bar tool to swap bracelets/bands. Takes a bit of getting used to, but it's quite easy once you figure it out. If you don't want to do it yourself, it's an easy and cheap fix at a local watch-maker.
I see this one recommended often, but I've been doing okay with the free ones that often come bundled with straps.
Well, I have one of these type of watch repair kits, so with the right tools it was very, very easy. From the idea to implementation to being back on my wrist and having a photo to share here was all of 35 minutes. The hardest parts were figuring out where the crown stem release was and trying to remember if I had any black nail polish anywhere.
Seriously super easy.
And can I talk more about how much I love this cheap little watch? I got it in December and have been wearing it at least once a week since then and it's been an absolute trooper. Now that I've done this I'm considering other mods -- I have a black datewheel that should fit in there, and I think a domed crystal would look super badass with the stark dial as it is now. The way I see it, if I really mess up bad, I can go back to square one for $15 with 2-day shipping, right?
Here's my list of tools. I and not any sort of expert and by no means claim it's the best, but I've been able to do mods successfully with it!
https://www.amazon.com/dp/B07PVPJ44Y?ref=ppx_pop_mob_ap_share
I think that's most of it...
If I had to do it over again I think I would buy this kit
https://www.esslinger.com/watch-repair-deluxe-watch-tool-set/
It has basically all the useful stuff short of a cheap amazon crystal press!
This youtube video is a good place to start: https://www.youtube.com/watch?v=LmhSzISB-2c
Once you start changing straps you may never stop, so I'd suggest getting a decent strap changing tool. Bergeron makes really good stuff, but something like this is fine: https://www.amazon.com/GGI-Spring-Bar-Tool-Set/dp/B005ZEWGSA/ref=sr_1_4?ie=UTF8&qid=1474832095&sr=8-4&keywords=watch+strap+tool
To buy your replacement strap you'll need to know the width between the lugs (where the strap attaches). Measured in millimeters. Amazon is listing your watch lug width as 21mm - most people will suggest to buy a 22mm nato strap and squeeze it in (they usually are even numbers - 18mm, 20mm, 22mm etc). You might need to buy some 21MM spring bars (ebay or amazon) - you don't say how or where the current bracelet is breaking, but its a small expense to buy new spring bars.
Something like this might look cool, but the trick with Natos is that they are pretty cheap, and you can buy three or four for $50 (try cheapestnatostraps dot com) and swap them out depending on your mood.
https://www.amazon.com/StrapsCo-Premium-Orange-Stripe-Ballystic/dp/B00ZJ49AC6/ref=sr_1_40?s=apparel&ie=UTF8&qid=1474832536&sr=1-40&nodeID=6358539011&keywords=22mm+nato+strap
https://www.amazon.com/gp/product/B016A8I8HC/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
This is the set I ordered, pretty cheap and it comes with 4 spring bars for every size 8-25mm. Not sure about the strength of the spring bars since I've only been using them for a day but they seem good. I just laid the watch down on a cloth and wrapped it in a micro fiber cloth to prevent any scratching.
https://www.youtube.com/watch?v=g5AIniENJwk
https://www.youtube.com/watch?v=gS92QnF2e4o
https://www.youtube.com/watch?v=dQw4w9WgXcQ
It's really pretty easy and only takes 10-15 min.
​
You have to search for the lug width to determine which size band you need. Googling gives me a general consensus of 18mm, but a few listings say 19mm or 17mm, so it'd be best to measure yours when you get it.
Here's the most recent buying guide for watch accessories. Check out the recommendations for watch strap stores.
At the minimum, you'd need a decent spring bar tool for changing the strap, like this.
Finally, no it's perfectly fine having multiple straps for one watch as it really does change up the look.
I also don't know what the minute hand is for.
Edit: lol - there is totally no consensus.
In terms of the cheap stuff, there is the big blue one, and the smaller gray/silver/black one. They both work fine, until the pokey part breaks (and it WILL break). Either one of those, with extra pokey parts, is a fine choice (for a time). I personally like the smaller silver one.
A more practical long-term solution (that sacrifices a bit of convenience) is a hammer/punch. This is what I wind up using 90% of the time. This kit gives you the best of both worlds.
None of those are really the best, but most of them work for occasional home use, at least for a time. Pro's mostly use a high end hammer and punch, and holder (like this), but occasionally something like this, or this. Those are ostensibly great tools, but probably overkill for the DIYer.
Yep. 20mm spring bar. They're pretty much all created equal. You might as well get something like this and never have to worry about it again, but there are a bunch of options on amazon and elsewhere. Anywhere that sells watches will probably have them if you don't want to wait for shipping.
You also might want a spring-bar tool to put it in. You can do it without a specialized tool but it makes it much easier. I have this one and it works great.
I wouldn't worry about it too much. Don't forgot that the lense of your sunglasses is black which would match the strap. I personally don't like mixing a blackface watch with a brown strap, but I would still look around Cheapest Nato Straps.com. The beauty of NATO straps are they are pretty cheap and interchangeable so you could mix around with them.
As for the comment below about removing the original strap; you don't need to slice. Just get one of these strap removal tool, and you could take it off your self. At most it will take 10 mins. Easy DIY job.
As soon as I opened the box and saw the watch in person, I immediately bought a new strap from WatchGecko. It's one of their cheaper vintage straps but I love it. The company is in England so shipping to California took a couple weeks. If you're thinking about changing the strap on your Bambino, I would recommend getting a good quality spring bar tool like the one I bought off Amazon.
I bought it a few weeks ago and it has been working great ever since!
Great deal if you have Amazon prime. If you don't have it, then get it because it is amazing. Ha!
GGI Spring Bar Tool Set - 5in., 7 Pc https://www.amazon.com/dp/B005ZEWGSA/ref=cm_sw_r_cp_awd_hKk2wb65N82FH
i'm just getting started doing the same actually. i bought all of my equipment for super cheap in one of those kits from amazon like this as well as a cheap watch press. They work relatively well.
The only other things i would recommend are getting a different type of case back remover (i found that these work better than the three point ones included in the kit) and something to hold the movement and other parts in once you remove them.
I found that using something with an 7S26 movement is the easiest since you can find a ton of video tutorials on them on youtube.
Finally, watchuseek's Seiko and Citizen forums have tons of documentation and step by step tutorials to check out.
They make small tools to make it easier, but you can do it with any thin, flat tool.
Here's an easy video that shows you how. I'd recommend NOT using a knife, as you don't want to cut the band - a small flat-head screw-driver, or even a thin metal putty knife would do the job nicely.
Does that help?
Someone more knowledgeable than me should answer this too, but:
2) This spring bar tool is the one I used, and seems to be perfect for the job. ~$5, prime eligible.
3) From what I've learned today, I guess 17mm could work as it's just being held by that bar, but the 18mm leather straps I have on it now are perfectly flush. It's definitely an "18mm watch". But I guess technically anything narrower will also "fit" on it.
These would definitely Make me smile, Rasta!
Thanks and good luck all :)
[I got one of these years ago, best investment ever!](ohuhu 147 pcs watch repair tool kit case opener spring bar tool set bonus a hammer https://www.amazon.com/dp/B00PVN1DC0/ref=cm_sw_r_cp_apa_kyaUAbXZ0N1DT). Its just nice to not need to bring it to someone for easy things like battery changes and link adjustments.
The CA 1212 is a 41mm band (I was way off). I couldn't find anything metal in that size. I'd call your local watch shop and see what they can order.
I love the 168W, it has the same module as the F-91W with a much better backlight and a great retro look. I have a NATO on my main F-91W, and while it was a pain to get on there, it’s much better than the resin band.
Also, the easiest way I found to remove the straps off a F-91W is with a little rubber mallet like this: SE JT6218 5-Piece Watch Band Link Pin Tool Set https://www.amazon.com/dp/B002Q8AJSM/ref=cm_sw_r_cp_api_bkcQBb60EQRR8
They also have a tool for removing the spring bar you can get.
http://amzn.com/B005ZEWGSA
I didn't use it but if you want to be super careful you might like this. Might be a good thing to have if you plan on changing bands a lot too.
I'd start by saying spring bar tools are cheap, and putting a different band or bracelet on a watch can really change its look. If you find a watch that you want to wear with different outfits, just pick up an additional band or bracelet.
All my watches are stainless steel or titanium, but I don't have a problem wearing them with a blazer with brass buttons, as an example. If I'm wearing a leather strap on my watch, I do avoid mixing black and brown. Black is black, and the point is it's nice and uniform. For brown leathers, I'm not concerned about the shade and some varience there can keep things from getting overly matchy. Can also vary things up with different types of leather, and as watch straps don't require much leather to make, that's a comparatively inexpensive place to add cordovan, stingray, alligator, crocodile, ostrich, tejus lizard, etc. if you want to have some fun with it. As an interesting example, here's what a $75 watch on a $300 strap looks like.
That black-dialed watch on a brown leather strap look sort-of intentionally clashes so you can wear it with whatever.
Honestly, it's not that difficult... I bought this and it works perfectly. Just be gentle with it... The first time took me about 10 mins with me being super careful like I was disarming a bomb but after a few times I can switch out a band in under a minute or two. There are some YouTube videos that explain how to do it in case you never replaced a watch band on your own before. Hope that helps!
Hey man, experimenting with straps is awesome, and can really transform the entire look of the watch. As far as tools go, you can buy a spring bar tool to assist you (I use a Bergeon 6767-F, but you can buy much cheaper ones). If you don't want to buy one, you can use the dental floss method, but it's pretty haggard and if you plan on switching straps more it's worth it to get a spring bar tool.
For straps, it really depends on how much you want to spend. On the cheaper end there's Clockwork Synergy and Barton Straps. In the mid to higher-tier there's WatchGecko and Holben's, and for something really nice Hirsch straps. There are more out there of course.
You'd be surprised. I thought I'd scratch the shit out of my Raven but the acrylic is still mostly scratch free. I have some small hairlines, but those are polished out with Polywatch.
Acrylic also stands up better to harsh drops/bangs which would normally shatter sapphire.
Nice watch though. I like the choice.
Vastar 147 PCS Watch Repair Kit Professional Spring Bar Tool Set, Watch Band Link Pin Tool Set with Carrying Case https://www.amazon.com/dp/B01HEO9UPK/ref=cm_sw_r_cp_api_f.XNAbD5GYBQD
This has everything you need.
The tool with a blue handle will be your best friend. It uses small pins to remove the links
https://youtu.be/RypyFp0pSbA
Good luck. It’s very straightforward and lmk when you finish
They're standard 22mm spring bars, can get them off Amazon, or most anywhere that sells 22mm watchbands.
Make sure that you didn't damage / widen the spring bar pockets in the plastic body of Pebble. They should be nice and round and clean. If you did make them into oval shapes, crack them, etc, then this can keep happening and you'll basically need to replace the Pebble.
A good spring bar tool goes a long way to prevent this, and is worth every penny. http://www.amazon.com/gp/product/B005ZEWGSA
I like this one the best. It's easily adjustable and the magnet is very strong. I also have this one, but you can only adjust it with a screw driver. This one also looks very nice, but you cannot adjust it without special equipment.
When I search for watch band 20mm milanese on amazon.ca, I get quite a few hits (and even more without the "milanese", of course). If you want to easily change the bands, look that you get one with "quick release spring bars". With normal spring bars you need a tiny screw driver or such a tool.
You need some Polywatch, a few microfiber polishing cloth and a few minutes.
Wipe the crystal with a clean cloth to ensure that nothing remains that could scratch the crystal more. Apply a small drop of Polywatch to the crystal and polish with a clean cloth for two or three minutes with gentle pressure. Remove all residue with a clean cloth. Be happy.
the tools i used where:
https://www.amazon.com/gp/product/B00BU0MWAA/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
and:
https://www.amazon.com/gp/product/B00PVN1DC0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
when using the hand remover id recommend cutting a little square out of a ziploc bag, cutting a slit in it, and have it cover the dial so the remover tool doesnt scratch it up. the dials scratch very very easily. Honestly with the cost of parts + having me put it all together, id feel like it wouldnt be worth it, better off DIY'ing it. the crystal press i have/the ones on amazon/all the cheap ones are all pretty shit and might give you trouble with the crystal install, so id recommend having a watch repair shop do that, i pinched/ruined 2 gaskets trying it myself.
Yes all you will need is a watch spring bar tool and you can swap out straps on a watch like that very easily.
a tool like this
https://www.amazon.com/BARTON-Spring-Bar-Tool-Replacement/dp/B01BERALY2/ref=sr_1_11?keywords=spring+bar+tool&qid=1550535499&s=gateway&sr=8-11
and strap like this
https://www.amazon.com/dp/B073V9JLPP/ref=twister_B07D7ZZL9Q?_encoding=UTF8&th=1
note that you may need a tool to both open the case back and close it again. If the watch has a domed crystal and a snap case, it can be very difficult to apply enough force to snap the caseback on again without potentially damaging the crystal. That's what the watch press tool is for. If you have a screw back, you'll just need a wrench that can engage the indentations on the case back so you can unscrew it. I got a cheap kit like this one, which has both a special knife for opening snap backs and the wrench for opening screw backs
Unless you plan to be doing this hundreds of times, I think the cheapo tools are just fine. Higher quality tools will last longer and be easier to use, which may only really matter if you need to use them with great frequency.
Up for sale is my Omega Speedmaster Reduced 2510.50 in very good condition! I’m sure most people know the general specs of this watch but if you don’t here is a link I was told by the last owner of the watch that it had been well serviced and kept. The last service was is 2016 but has been only a few times since. I have ran my timegrapher on it and it’s readying +/-4spd in most positions. The crystal has the Omega logo in the center so I know it’s genuine Omega Hesalite. It does have a small scratch near the 7 o’clock edge of the class, [Polywath](Plastic Watch Crystal Scratch Remover Polish Tool https://www.amazon.com/dp/B00E3T237C/ref=cm_sw_r_cp_api_i_4OIoDbFQ8MB6G) would probably take it right out so I have no problems with trying to get it out before shipping it. Serial is 59XXXXXX, if you know how to find the age out please post it.
Full Gallery: https://imgur.com/gallery/07AmbjF
Asking: $1850 I’m posting it accordingly because the most recent model of this watch sold for $1850 and it was in very similar condition. I will always consider reasonable offer though. Located in the U.S. will ship anywhere in the U.S. or to any Maple brothers. PayPal for payment F&F, G&S+3% ($1905)
Please check my feedback and buy with confidence!
I bought my own tool from Amazon and it has been my saviour on many occasion like helping friends to change straps and bracelets etc. Its very cheap and worth the while to get one for yourself. Cheers
Sizing the metal band is very straight forward. I love watches and being able to do things by myself so I bought a watch repair kit for £2 off of Amazon. This is the kit I got, it was on sale when I bought it, I only use the hammer and pins. I got it simply because going to the jewelers and being charged £10 to get a watch band adjusted is ridiculous. I have used it countless times since then and I definitely got my moneys worth.
The black band will get scratched over time, it is impossible for it not to. But the good side is that they typically get scratched on the bottom, and on the inside of the band (depending on the clasp used), so you will never see it unless you want to.
Aaaaaaaaaay, gurlfran'. My favorite class is probably my English class. That teacher is the chillest person I've ever met. I already told you about him, but I'll tell you again. I've written one paper the entire year. One paper! I've written more papers for my history class, which is sad. But yeah, this man makes English super fun.
This PR class is nuts.
What u/johnydangerous said. Even with little experience, there are plenty of YT videos that can help. I learned how to regulate my movements by simply watching YT videos...you'd be surprised how easy it is. If you don't already have the tools, get this kit from Amazon and you'll have more than what you'll ever need to work on your own watches. Save yourself the money in the long run! 😉
https://www.amazon.com/Ohuhu-Professional-PCS-Watch-Repair/dp/B00PVN1DC0/ref=mp_s_a_1_3?crid=2HOTZY409XU3&keywords=watch+repair+kit&qid=1550198434&s=gateway&sprefix=watch+rep&sr=8-3
Yes you do, it is a 6 dollar [strap tool] (http://www.amazon.com/SE-Spring-Bar-Tool-5in/dp/B005ZEWGSA). It is honestly really easy to do, you just kind of wiggle your way between the strap and lug, and push down on the end to release it out of the hole. Imagine a really small toilet paper holder, that you need a tool for. That's it.
I would say I have pretty average sized wrists, I can't remember exactly the circumference. I also don't remember for the Seiko 5 bc I never used the original band. The reason why the watch looks big is because the dial takes up the majority of the face of the whole watch. The bezel is really small, so this in comparison to the Seiko 5 makes it look much bigger that what it really is. In reality, it is only 2 mm bigger measuring at a 39 mm face.
The same thing happened to me when I put it on at first, you will get used to it very quickly and it will look normal.
> i was wondering what i should get as a replacement. Still leather, and if yes, same color?
Seems versatile. I'd say google image search around and see what strikes you; e.g.:
lighter brown leather, contrast stitching?
tan leather, black stitching?
red leather?
mesh?
This watch has enough of a military feel that it could look good on a NATO strap as well, and those come in all colors and can be changed without a spring bar tool though you'll want to buy one of those anyway.
My point is, variety is good. It's like having more than one watch, but much much cheaper. Just make sure you get the right width (probably 22mm).
Also look at what people have done with their Sinn pilot watches, particularly the 656, which has a similar dial. If you wear leather shoes most days/at work, consider matching. Crown & Buckle is often a recommended place to start shopping.
I've found I like to have a variety of bands on hand for my watches. I found this 22mm band at Walmart and adapted it to the buckle that came with the Zenwatch. I don't believe the black one on Asus' site is currently offered so if you want a black one that closely matches it, you could find a smooth black leather band and use this process to attach the buckle your watch came with.
If you're interested in a stainless band, I really like this 22mm Hadley Roma Stainless band I found on Esslinger.com for $22. Just make sure you have a pin pushing tool so you can adjust the links on it! This spring bar tool I bought includes a set of pins that worked
EDIT: after taking another look, it seems that band isn't carried on Esslinger anymore :(
I've had this one from Amazon for a couple years and it's nothing special but totally adequate to the task. There are nicer ones like this if you want them.
I have something like this cheapo kit from Amazon which is good enough for resizing bracelets, changing batteries on cheap watches, swapping bezels, and other quick beginner friendly tasks. It's fine for me because I don't really collect expensive watches.
The problem is that a lot of watches can be tricky and you will rapidly begin scratching the shit out of them or clobbering their water resistance to death unless you actually buy some real gear and do a little homework, in which case I'd also refer you to /r/WatchHorology which has numerous tool and resource roundup threads. This sub has some great ones as well
I've been wanting to get a seaking like that. Real nice. The Borel is interesting too, do you have more info on it?
Lastly, the Borel and the Hamilton look pretty dinged up. They appear to be acrylic, you should look into polywatch.
Good news! This has standard lugs/strap so you should be able to use a number of straps. You'll need a springbar tool to remove that strap (youtube can show you how to use this)
https://www.amazon.com/GGI-Spring-Bar-Tool-Set/dp/B005ZEWGSA/ref=sr_1_7?ie=UTF8&qid=1495471528&sr=8-7&keywords=spring+bar+tool
Your watch lugs are 22mm apart, so that's the size of strap you'd need.
Any of these NATO straps would work:
https://www.cheapestnatostraps.com/collections/nato/22-mm
These two-piece zulu straps would be cool too:
https://www.cheapestnatostraps.com/collections/smart-watch-straps/22-mm
no need to get a whole new watch when you can just find a strap you like that will be better for the warmer weather.
Sorry to hear it, counter top has gotten one of my watches before too. In the past only thing that's worked for me was Polywatch, I've used it on a few watches before, glass and plastic with great results. I have not however used it on my Galaxy Watch so I can't comment on how well it'll work. Definitely worth a shot if that scratch is bothering you though. Or putting a screen protector on may hide it. Hope this helps!
Polywatch Plastic Watch Crystal Scratch Remover Polish Tool https://www.amazon.com/dp/B00E3T237C/ref=cm_sw_r_cp_apa_i_u3ZpDbQWVS8HA
Seems my first reply contained a link that wasn't allowed ... copied and pasted below with a different link ....
That should be hesalite - tap it with your fingernail and see if it's plastic or glass. If it's glass, then take it to a pro to polish out. If it's plastic, then it's really easy and you can do it at home in just a few minutes.
Now, given that the bezel looks great, cover it first with some low-tack masking tape. Rub the glass all over with 2000 grit wet and dry paper. It's going to look far worse before it looks better but have faith. There's no need to apply lots of pressure but 2000 grit wears out fast, so keep folding it over and keep sanding in a circular motion. Once all the big scratches are gone and you have a consistent "cloudy" glass, reach for this. I use a chamois leather but any clean cotton rag will do. Put a few drops on the glass and polish away. It won't take a minute to go from cloudy to as new.
If you haven't got the major scratches out, repeat all the above. After you're done this once, you'll get more confidence to do it again.
As for the servicing, I'm guessing with the LHD car that you're not in the UK? If so, can't really help on that one.
Yeah! Any 22mm band. Just make sure to order a spring bar tool if you are going to replace the band yourself. I would recommend going to a physical store to get the band so you can make sure that it will fit.
No guarantees, but Polywatch might be able to fix this:
https://www.amazon.com/dp/B00E3T237C/
I've used it on a cheap plastic watch and it came out perfect. It took a couple hours of gentle scrubbing. I'm not sure if it's worth the effort.
Yeah you can swap out straps until your heart is content. Pick up a spring bar tool and 20mm leather strap from Amazon and you should be good to go.
This is true! If it's the same model that I saw the crystal is Hesalite plastic! You should be able to easily remove most scratches with a bit of love and some Polywatch: http://www.amazon.com/gp/aw/d/B0014R9V9O/ref=mp_s_a_1_1?qid=1463377873&sr=8-1&pi=SY200_QL40&keywords=polywatch&dpPl=1&dpID=419qrOEjfNL&ref=plSrch
Something like that https://www.amazon.com/gp/aw/d/B016A8I8HC/ref=mp_s_a_1_4?ie=UTF8&qid=1484114606&sr=1-4&pi=AC_SX236_SY340_FMwebp_QL65&dpPl=1&dpID=316Ha6GGVRL&ref=plSrch ? The price doesn't seems crazy, that would be a good investment!
Edit : or maybe more like that https://www.amazon.com/gp/aw/d/B01E4X06HA/ref=mp_s_a_1_3?ie=UTF8&qid=1484114606&sr=1-3&pi=AC_SX236_SY340_FMwebp_QL65&dpPl=1&dpID=51tJOOJ8TzL&ref=plSrch ?
Nah, get a Springbar tool they're cheap enough and you can swap out the straps in about 1 minute. Re-sizing a metal bracelet is hard but on a cheap watch I use a bobby pin and my bench vise and push the watch down on the needle and it pops the bar out easily. A price bracelet Id take to a jeweler and pay $5-10 to have them fit it, most do it for free though.
The Seiko 5 SNK795 is rather neat for the price. The red second hand is a nice touch. It comes with a bracelet, and you ought to be able to find a cheapish leather strap for it, along with the spring bar tool for DIY bracelet/strap swaps. All together, your total is under $100.
Just make sure to get the same lug width bracelet. Then buy this fella so you don't fall victim to exorbitant pricing. Just make sure to do your research for compatibility, but yes it can be done and very easily at that.
The depth isn’t a HUGE factor in normal non-scuba activities. The pressure exerted on the seals is though.
A shower head might break the 10-15m pressure equivalents so overall I’d trust it in a shower, hand washing, brief dunking in a fish tank, or hanging out at a backyard pool.
If I were to go ocean swimming or find myself in a situation for possible prolonged submersion I’d get the seals greased and pressure checked somewhere.
You could also DIY it.
Mophorn 6 ATM 10 Bar Watch Waterproof Tester 2 Watches Watch Case Resistance Measuring Tools Water Resistant Tester Tool for Waterproofness Testing https://www.amazon.com/dp/B0722GRN92/ref=cm_sw_r_cp_api_i_l.QkDb68N0SY8
EZTool Watch Repair Kit with 16 Tools and 41-Page Illustrated Maintenance & Service Manual https://www.amazon.com/dp/B01DU47EEM/ref=cm_sw_r_cp_api_i_xeRkDbETZP7AC
https://blog.esslinger.com/how-to-waterproof-a-watch/
If $400+ reps are your thing this might be a good investment as watches should be tested regularly. Stick it in before bed and wake up to a tested watch you can swim with.
Really it needs to be tested for any water exposure. :-)
Buy a strap from wherever (hirsch is pretty good http://www.hirschstraps.com/collections/leather-hirsch-straps) and if there's a watch boutique or kiosk near you, they'll probably switch it out for free. Or you can buy a spring bar tool and do it yourself https://www.amazon.com/GGI-Spring-Bar-Tool-Set/dp/B005ZEWGSA
It depends on the type of watch you have. If the back of the watch looks like this, you can use one of these tools to open it. Link
Some other backs have no lugs to grasp and therefore you'd need a knife tool and possibly a watch jig to push the back on with the correct pressure.
Once it's open it's super easy to change the battery. Don't spend the $75 lifetime unless you're working with really high end watches that are better left to the pros, or it's a difficult case to open. But instead of paying $300, you can buy all the equipment you need for around $50 and do those watches, plus all future ones you acquire, for free.
Can't really answer this question specifically, but the band or bracelet is really a non-issue since they are easily swapped in and out with NATO straps or a strap of your choice. Just make sure you measure the band width correctly with the one you're replacing it with. Costs like $5 for the tool needed
Agreed! Even just a $20 one from Amazon is enough.
https://www.amazon.com/Ohuhu-Repair-Tool-Model-Watch/dp/B00PVNPSV2/ref=sr_1_1?s=hi&ie=UTF8&qid=1486405470&sr=1-1-spons&keywords=Ohuhu+Repair+Tool+%28Model%3A+Watch+Press+Set%29&psc=1 that's the one I got and it works great!
and this kit has already paid itself off simply in bracelet sizings! https://www.amazon.com/Ohuhu-13-Watch-Repair-Opener/dp/B00PVN1DC0/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1486405509&sr=1-1-catcorr&keywords=Ohuhu+13+Piece+Watch+Repair+Tool+Kit+Case+Opener+Spring+Bar+Tool+Set+Bonus+A+Hammer
For bezels, check out 10watches or Yobokies, or even ebay.
As far as strap options go, the sky's the limit: leather, bracelet, rubber and NATO straps would all work well with that model.The jubilee style bracelet is very popular, NATOs can be found on cheapestnatostraps.com, and Hadley-Roma is good affordable bracelets and leather straps. You'll also want to invest in a spring bar tool for changing straps and bracelets.
Anyway, enjoy your new watch and be sure to stop by /r/seiko and show that bad boy off!
bergeon 6767-F is the best. As other people said, other ones on Amazon are okay, like this one, but like in all aspects of life.. you get what you pay for.
The Bergeon is far better build quality and feels sturdier. The cheap one I posted is decent, but it doesn't feel that well made and the tips aren't great. Someone said the Burgeon F for bracelets and some other model for other bands, but If you get the F model (one I posted) it will work find for leather/rubber bands. The other way around not so much, because the F has a finer tip. So if you're only getting one, get the Burgeon 6767-F
Source: I have both spring bar remover tools that I linked
I bought the cheaper one first thinking, how can there be a difference ? Ever since buying the Burgeon one, I haven't used the cheaper, crappier one. Go for quality
As an alternative to what /u/BluAnimal said, you could easily remove links from a metal watch band yourself. All you would need is one of these cheap tool sets and you're good to go. It's very easy to learn to use and you'll be able to adjust your metal bands whenever you want.
I would have struggled as well probably. St least until I inherited a watch knife (not sure how rhis tool is called in English). With something like that it becomes relatively easy to open a watch.
And it is probably cheaper. I am sure you can find some video on YouTube explaining the use.
You could try using a product like Polywatch, which is used to fill scratches in watch crystals that are plastic. In theory, it would work the same. Good luck!
https://www.amazon.com/Polywatch-Plastic-Lens-Scratch-Remover/dp/B0014R9V9O
> brand name watch
All watches will have a brand name. Do you mean like a designer brand name? Because those will be garbage watches.
For $500 dollars and with no other information, I'd recommend buying a Seiko Sarb033 and whatever leather strap you want (I recommend the brand Hirsch), and a spring bar tool.
You should never buy a watch for the strap it comes on a) because most watches come on bad straps, even a lot of good watches, and b) you can just buy straps and put whatever strap you want on a watch.
If there's anything else about the style of the watch you want, like colour, size, etc, that would let us made more recommendations.
Looks like a watch case press: https://www.amazon.co.uk/Watch-Case-Press-Nylon-Dies/dp/B006KZ4MYO
This and the cell battery in there lead me to be fairly confident in this.
Edit: Found a better picture: http://www.ebay.com/itm/Handheld-Watch-Case-Back-Press-Jewelers-Repair-Hobby-Tool-11-Dies-Watchmakers/142011882554
I've been using the Pebble Steel band from Best Buy without issues. I installed it myself and had to remove quite a few of the links, but still no cracks or any other issues at all. (Also to specify: I used the OEM spring bars)
The only thing I suggest is that you make sure you have the proper tools before trying to do any of this yourself. Honestly, you could probably do it with a tiny screwdriver, but I wouldn't suggest it. I used a spring bar tool that I bought from Amazon along with some patience and steady hands :)
I haven't bought one. I have a lot small scale tools from working on RC planes ( an old hobby ), but the only thing I have needed to do in the last several years is replace a battery. I have a bunch of springbar tools, since they ship with half of the nato straps I have purchased on Amazon. Both of these kits are pretty affordable, and seem to have the important items.
https://smile.amazon.com/dp/B01DU47EEM/
https://smile.amazon.com/dp/B0714DJYLQ/
No worries, thanks for the pic! Is this the tool you are referring to?
I honestly always thought I would be a SARB033 kind of guy, but man that white dial with the brown strap looks amazing. For the brown strap, can you comment on how much wear it has?
Finally for pricing, would you do $320 for the watch/strap bundle?
i went chea and got this, but ended up buying the things that it lacked, and cost more than if i had just bought this.
For me the second one was still incomplete, and i would need a larger screwdriver set, but its a great start.
It's my pleasure.
If you're working on a Timex Weekender, more likely this tool would suffice. If the backing is indeed screwed on you would need a tool like this.
You can still find similar looking Seiko variations to Timex pieces. Check out the SNZG15 for example. There are so many Seiko pieces, it would be wise to not get completely discouraged when looking into the brand!
Go ahead and open it, take a look. Save yourself some money though and buy an 8 dollar friction ball. Works like a charm. https://www.amazon.com/Friction-Ball-Watch-Case-Opener/dp/B0058EDAUA
Amazon has some nice straps. I personally like the Hadley Roma straps. All you need to know is what width strap you'll be replacing. If you don't already have one, pick up a spring bar tool set while you're there. You could also put a NATO band on there, they seem to come in bright colors that should match the green.
Yeah sorry posted the wrong link - I did buy the 22mm:
http://www.crownandbuckle.com/harbor-22mm-black-calf.html
It's a particularly tight fit near the pin. You could probably cut/shave down the strap around the pin area to help. I also have this tool which definitely helps remove and reinsert the pin:
http://www.amazon.com/Spring-Bar-Tool-Set-5in/dp/B005ZEWGSA/ref=sr_1_1?ie=UTF8&qid=1415762030&sr=8-1
I'm not sure I'd have done it without that.
I've got a cheapo that is already wearing out after a couple dozen uses. It worked great at first, but the metal is pretty cheap. If you can swing the extra money, Bergeon is supposed to be the bee's knees. I think that will be my next.
polyWatch Watch Face Scratch Remover and Repair Polish https://www.amazon.co.uk/dp/B00E3T237C/ref=cm_sw_r_cp_api_i_MIUhDbBA9869J
Please see the above comment about the fact
It was probably just removing the coating. They were very light scratches but the photos are genuine - the difference is amazing
I realized the vendor I posted has the watch on a two piece strap. This means you'll probably have to get some watch tool like this. But then again, the process of swapping out the band is super simple too. The bars holding the straps have springs and are collapsable.
This is just me thinking off the top of my head but a lot of guys who collect Swatch watches use something called PollyWatch to reduce the scratches on their precious watch faces. Can't see why that wouldn't work on a camera.
>^^^Always ^^^read ^^^the ^^^label. ^^^r/photography ^^^are ^^^not ^^^responsible ^^^if ^^^this ^^^makes ^^^things ^^^worse!
Solar powered watches are charged by any light - just keep it face up in a lit room when you take it off and it will never lose charge.
I have a Seiko 5 and the only time I need to adjust it is when i don't wear it for a couple of days and it stops - I have compared it against my phone and it keeps the right number for hours and minutes which is all I'm concerned about.
You can adjust the strap yourself easy enough https://m.youtube.com/watch?v=q2xrEgjchKk It might be better to get a tool like this though which you can get for a few dollars on eBay https://www.amazon.com/gp/aw/d/B005ZEWGSA
This was my first one, to open cases and change batteries and stuff
SE JT6222 Watch Repair Tool Kit, 13-Piece https://www.amazon.com/dp/B004FWHOVC?ref=yo_pop_ma_swf
Then I got this for hand pulling and installing when I was doing the project I mentioned
Watch Hand Presto Presser Lifter Puller Plunger Remover set Fitting Repair Tools https://www.amazon.com/dp/B00BU0MWAA?ref=yo_pop_ma_swf
And finally I got this because I couldn’t close some cases on my mom’s watches
Se Professional 13 Piece Set Watch Back Press W/ 12 Dies Jt1229 https://www.amazon.com/dp/B005AJ5DZI?ref=yo_pop_ma_swf
As for quality, I really have nothing to compare them to - they were cheap and got the job done and for how often I need them, plenty good for me.
Are there any good quality kits for replacing bands that aren't made of plastic? My dad's been modifying his watches for quite a while now and I've seen he's got a couple broken handles to the plastic band replacement.
I've seen stuff like this on Amazon, and they're the kind that he's got. Are there any full metal ones?
I've also found this on Amazon, but I'm not sure if it'll be as easy for taking out the links. Any recommendations?
If you're going to just be doing a one time thing just bring it to any local jewelry shop and they'll do it pretty cheap. If you're going to be buying watches often, then buy a hammer/punch set. Something like this will work fine: https://www.amazon.com/SE-JT6218-5-Piece-Watch-Band/dp/B002Q8AJSM/ref=sr_1_1?ie=UTF8&qid=1494690837&sr=8-1&keywords=watch+resize
it very easy to swap out the stock rubber strap for a bracelet, or any other strap. you just need a spring bar tool. there are lots of youtube videos that show how to do it. it only take about 2-5 mins to swap out. its easy.
​
here is where the oyster bracelet came from
​
Oyster Bracelet
​
and here is a spring bar tool. there are more expensive ones, and ones that have different tips and such, but this one works fine for me.
​
spring bar tool
Looks tough as nails on that strap. I love vintage military watches. If i were you i'd get some polywatch and clean up that crystal on the watch.
Pretty sure your jeweler took out the pins and the sleeve that holds the pin tight fell out and he didn't know. If you don't have the sleeve then the pins will be loose. You can probably get new pins and sleeves from Moto.
I got the following kit to do it myself. Pretty simple job with the right tools.
http://www.amazon.com/gp/product/B002Q8AJSM/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
looks like the little nub is gone for the quick release pin
link
they sell a tool on amazon link that might do it, or try one of the small screwdriver sets, you can get them at any home goods store something like this, i bought mine at Harbor Freight near where I live.
I can't see any holes from the angle of your photograph, but if it has the holes on the side you can get a tool kit from Amazon for $5. Here is a link to the one I used for my watch:
https://www.amazon.com/gp/aw/d/B002Q8AJSM/ref=yo_ii_img?ie=UTF8&psc=1
You could also take it to pretty much any jeweler.
It is a snap back, it's a little tricky depending on how tight it is. To do this properly you need a [case knife] ( https://www.amazon.com/gp/aw/d/B0001CULSS/ref=mp_s_a_1_1?ie=UTF8&qid=1469935099&sr=8-1&pi=SX200_QL40&keywords=watch+case+knife&dpPl=1&dpID=31vV2ratvDL&ref=plSrch) or a sharp screw driver. You will find a small lip/cut-out under the case back, there is only one, so have a close look. Use the knife or screwdriver, it will fit into the Cut out, give it a little twist and it will pop off. Swap out the battery. Now getting the case back on can be a bit tricky. It can take a fair amount of force and you have to keep the caseback parallel to the case. This is made much simpler if you have a [case press] (https://www.amazon.com/gp/aw/d/B00PVNPSV2?psc=1#immersive-view_1469935562583)
Or take it to any jewellery shop that sells Watches and they will do it, but the price can vary a lot ($10 to $20), but where is the fun in that?
The cheap tools are more than fine.
The twisty thing works great but as another poster noted, pins don't always go back in easily, so you need the hammer.
Just buy this guy and call it a day:
http://www.amazon.com/16-PCS-Watch-Tool-Kit/dp/B000T9VK56
I don't know what you're looking at, but you can pickup a bucketload of spring bars for less than $20. They're all different sizes. You can either measure it yourself, or when you purchase aforementioned bucket of spring bars, you get all sorts of different sizes.
I've seen a number of redditors praise Polywatch
https://www.amazon.com/Polywatch-Plastic-Lens-Scratch-Remover/dp/B0014R9V9O
Obviously only take the polywatch action if Oculus support don't help you out.
Once fixed maybe contemplate putting lens protectors on. These ones worked for my Quest which I believe has similar lenses to the Rift-S.
https://imgur.com/a/jGDzyf2
It's pretty easy. You just need a spring bar tool to remove the strap
http://www.amazon.com/Spring-Bar-Tool-Set-5in/dp/B005ZEWGSA/ref=sr_1_1?ie=UTF8&qid=1419285713&sr=8-1&keywords=spring+pin+tool
I own a bunch of watches and do adjustments myself. I got a basic watch kit... pretty easy peasy to do a lot of this stuff yourself. Comes with extra springs in many sizes...
https://smile.amazon.com/gp/product/B0714DJYLQ
Its really easy to do yourself-I watched a youtube video the first time. The tool is $6 or so on amazon here. The strap will cost anywhere from $15 to several hundred, depending on which you get. Crown and buckle is a popular vendor here.
I know you mentioned a small flathead screwdriver, but I've been using this set since my Pebble days. The notch in the pin pusher is good for preventing the pusher from slipping and scratching the watch, and holding onto the pin once it releases so it doesn't fly across the room. The pin remover is also not bad for removing links on metal bands.
If you really like it, buy this set of tools and open the back yourself. Take out the old battery and put a new one in yourself. It's incredibly easy to do.
Thanks. Here's a like to the 6767f for others convenience Bergeon 6767-F Watch Spring Bar Tool - Long Stainless Steel Handle with Replaceable Screw In Fine Tool End https://www.amazon.com/dp/B001IZT8R2/ref=cm_sw_r_cp_tai_sQK8ybCSFSC1B
I replaced mine with a metal band off amazon which I won't link because I am not very happy with the band (linked many times on here, it's cheap black metal.. and I'd avoid it), but changing the band was very simple. It does require a toolset, but they can be found very inexpensively, like so: http://www.amazon.com/Spring-Bar-Tool-Set-5in/dp/B005ZEWGSA
You just compress the spring bar which frees the band, put the new band in, done.
Here is mine Blue face with leather strap, so sexy. Here is the link to the strap I got but it is currently sold out. I paid $14.95 for it, should be able to find something comprable on ebay or amazon. I also bought this toolkit to swap out the bands, made it infinitely easier to do.
There are holes in the inside portion of the lugs to hold the spring bar. But on most watches those holes don't go all the way through the lugs.
A Bergeon spring bar tool will help you pop out the spring bars from underneath. Cheaper options are available, but the Bergeon tool will last much longer and is a good investment if you'll be doing this task more than once or twice.
Get yourself one of these and a strap of your choice. NATO straps seem to be popular with the easy reader/weekender. Just search for a tutorial on youtube how to use it.
No separate springbars required! I bought the product here to swap from bracelet to NATO and honestly, was too excited to use it - i just cut a notch in an optics screwdriver :) this tool should do the job when i eventually put on my Crown & Buckle custom leather strap.
It is safest to use one of these than a butter knife or something. They're made to be safe to use on watches.
I bought these ones to specifically have my pebble time steel links removed. They worked perfectly.
5 Piece Precision Screwdriver Set for Watch Repair, Watch Bracelet with 5 Extra Blades https://www.amazon.com/dp/B00JPXW0N8/ref=cm_sw_r_other_awd_u7vNwbH0HK36M
you should start out with a basic kit (can't find the one I started on, this is basically it), hand puller/presser, and a crystal press and you should have the tools do do most anything people like to do as far as mods come... domed crystal swaps, new hands and dials, etc... plus you'll have all the tools necessary to change batteries, resize a bracelet, etc...
But the caveat is that they're inexpensive beginner tools, and if you find this to be a hobby you enjoy, you'll start replacing items one by one from Esslinger -- the tweezers aren't good enough, replace them with a nice set of 7, the screw drivers are too blunt/dull shape them for now but replace them with a nicer set, etc... while you'll eventually replace everything, there's no sense in going all in for several hundred dollars just to try it out.
For a quality spring bar tool, check out the Bergeon 6767 a bit pricey compared to the Chinese ones but certainly worth it.
I have one too, and I like it!
Add some quick release spring bars, and changing strap band just takes a few seconds. Perfect to switch from a sport band to a more "dressed" one.
(You'll need to make a cut in most bands to let the quick release nub out.)
Edit: only thing I haven't found yet is a third-party 22mm steel band with quick release lugs.
Great post for us beginners. For me, unfortunately one day too late though ;)
I did my first link-removal yesterday using a small hammer, a thumbtack (the kind with a grip) and a couple of post-it pads as the work surface (to hold the link up from the table so the pin could be pushed out). It worked well, but it did feel kind of ghetto with the thumbtack.
I started looking online for tools specific for this, and I did find the types of kit you use. But I was thinking, if you just want to be able to do bracelet/strap swaps and link removal/addons .. Would something like this be a good buy?
I hate getting big kits with lots of parts when I only need one specific tool (not for cost reasons, but rather space saving)
what;s the best general purpose watchback opener? not expensive, best if i coudl amazon prime it
https://www.amazon.com/gp/product/B01IP1983U/ref=ox_sc_act_title_2?smid=A2CGN80EVS3S24&psc=1 is one im considering
I've used this stuff to fix the scratches on my OG pebble. Works pretty well for me.
Do not let the band that comes shipped with your watch hinder you from making the purchase. More often than not, these bands can be easily removed with this tool. Leather straps are fairly easy to buy.
Best 25 bucks I ever spent
https://www.amazon.com/EZTool-Watch-Repair-Kit-Tools/dp/B01DU47EEM/ref=sr_1_1?s=hi&ie=UTF8&qid=1499442194&sr=1-1&keywords=EZTool+Watch+Repair+Kit+Tools%3A+Plus+41-Page+Illustrated+Watchmaker%27s+%22Maintenance+%26+Service%22+Manual
Well I didn’t do the sapphire myself but I got most of it off amazon.
friction ball
duster
tool kit
hand tool
However if I was going to pop the sapphire i would have bought a tool off amazon.
Generally, you endeavor to have the watch strap match the colour of your belt and shoes, not the watch itself. I have purchased straps from both Crown and Buckle and Strapped for Time and am more than happy with them. Any jeweler should be able to change straps for you, and you can even buy the tools to do it yourself.
Also, you should be conscious of the physical size of the watch, as you may struggle to fit larger watches under the cuff of a formal shirt. The MVMTs I saw were all 45mm, which is quite large - I'd probably be looking at something in the area of <42mm. Additionally, be conscious of the size of your wrist, as a large watch will dwarf a small wrist.
MVMT are "bauhaus" style watches, which /r/Watches has a primer on here. Skagen and Rodina are bauhaus style watches at a similar pricepoint which are more appropriate to formal wear.
fisrt item i found on amazon but im sure there's cheaper ones out there. careful not to scratch your new watch!
If the toothpaste doesn’t work, I’ve used this on multiple watches and Fitbits and it works great:
https://www.amazon.com/dp/B00E3T237C/
There is a few options for protecting your lenses that I've seen here
https://widmovr.com/product/oculus-rift-prescription-lenses-adapter/
https://www.amazon.com/gp/product/B00SJ22D56/ref=ox_sc_act_title_3?smid=A15IOYF42EKEUQ&th=1
40mm is supposedly the perfect size
https://www.thingiverse.com/thing:3653631
https://www.thingiverse.com/thing:3659124
3d printed stuff
https://www.amazon.com/Polywatch-Plastic-Lens-Scratch-Remover/dp/B0014R9V9O
If you already scuffed up your lenses buy this
Technically, you should use a case back press, but you could try very gently tapping it with a nylon hammer (if you have one) around the edges
Its basically a third of the way down the bar and the leather strap has a hole cut for it so you can release the spring and take the strap off. Its basically this:
http://www.amazon.com/1-8mm-Release-Spring-Cylindrical-Button/dp/B00Q7XE866
Anyway, I went ahead and ordered some spring bars and a new strap so it should all be good. Thanks anyway though!
There's a product called polywatch that's a miracle substance on acrylic/plexi crystals. Just apply a bit of that, rub it down with a microfiber cloth for a couple minutes, and good as new.
Also, nice choice. That's a hell of a first watch.
Buy this and it will fix the scratch unless it's super deep
Polywatch Plastic Lens Scratch Remover https://www.amazon.com/dp/B0014R9V9O/ref=cm_sw_r_cp_apa_i_uenMDb4F613D8
I'd say it's worth a cleaning, at the very least. Any competent watchmaker should be able to do it, or you could look into sending it to Tissot for a service. A basic cleaning shouldn't be too expensive, maybe a hundred bucks or so. In the meantime it might be worthwhile to invest in something called Polywatch, which you can use to take the scratches off the acrylic crystal. Then pick up a decent leather strap (generally anywhere between $30-$120, depending on whether you want genuine or imitation croc, what kind of stitching, buckle or deployant, etc) and it'll look great.
There's a couple of these on Chrono24, so if you want to know what these are going for here's a link. Yours might be worth a little more versus a stainless steel model because of the gold content, but the condition that your watch is in will hurt the value a bit. http://www.chrono24.com/en/search/index.htm?query=Tissot+PR516+Vintage&amp;dosearch=true&amp;searchexplain=true&amp;goal_suggest=1
Thanks! Going to give this one off amazon a shot.
Buy the springbar tool and a complete kit. Look at this. The kit has a few more tools that might be handy and only costs a couple of dollars more. And yes both of these are worth it even if you only use it a couple of times.
I also recommend the Bergeon. Their fork tips work very well. Cheap ones may be too thick and can't remove the spring bar. https://www.amazon.com/Bergeon-6767-F-Watch-Spring-Tool/dp/B001IZT8R2
Here's the list of all the tools I got:
Tweezers- https://www.amazon.com/gp/aw/d/B0028C9IMO?psc=1&amp;ref=ppx_pop_mob_b_asin_title
Hand presser/lifter- https://www.amazon.com/gp/aw/d/B0748HZTMH?psc=1&amp;ref=ppx_pop_mob_b_asin_title
Case opener- https://www.amazon.com/gp/aw/d/B0058EDAUA?psc=1&amp;ref=ppx_pop_mob_b_asin_title
Clippers for cutting the stem- https://www.ebay.com/itm/Mini-End-Cutting-Pliers-Nippers-4-quot-Electrical-Wire-Cutter-Jewelry-Tool-Allied-/322393033884?txnId=2067048388011
Magnifyer (loupe)- https://www.amazon.com/gp/aw/d/B000LDG2HQ?psc=1&amp;ref=ppx_pop_mob_b_asin_title
Magnifyer holder- https://www.amazon.com/gp/aw/d/B079CBLTDG?psc=1&amp;ref=ppx_pop_mob_b_asin_title
Case cushion- https://www.amazon.com/gp/aw/d/B07GPH2M6X?psc=1&amp;ref=ppx_pop_mob_b_asin_title
Silicone grease (for the o-ring)- https://www.amazon.com/gp/aw/d/B0058ED3MA?psc=1&amp;ref=ppx_pop_mob_b_asin_title
Rodico (for picking up dust)- https://www.amazon.com/gp/aw/d/B008YMGYBU?psc=1&amp;ref=ppx_pop_mob_b_asin_title
You'll also need a set of jewelers screwdrivers and files, which I already had, and some nitrile gloves or finger cots so you dont get oil and dirt from your hands onto the movement. I've also seen other people recommend getting a movement holder to hold onto the movement while you attach the dial and hands.
You can use a small eye glass screw drive to remove the spring bars. But the best tool to use without breaking the bank is this one http://www.amazon.com/Spring-Bar-Tool-Set-5in/dp/B005ZEWGSA
I need to open a bunch of snap on case backs and don't want to pay a jeweler to do it. Will a $5 case opener do the job? I know that they're poor quality and there's better quality tools, but will a cheap one do the trick?
I was looking at something like this or this
I bought this one and I've been happy with it.
Do it yourself, it's easy:
http://www.amazon.com/GGI-Deluxe-16-piece-Repair-WTK-16/dp/B000T9VK56/
Just find the right battery and order it from Amazon, or spend more and get it from CVS.
Check out poly watch on Amazon. A lot of people have reported good results at fixing Pebble scratches.
Buy this: Bergeon 6767-F Watch Spring Bar Tool - Long Stainless Steel Handle with Replaceable Screw In Fine Tool End https://www.amazon.ca/dp/B001IZT8R2/ref=cm_sw_r_cp_api_SFMWAb7A77HCN
It’s the most useful tool anyone with a watch should own.
> Do you change the straps often?
Given the EDC includes a "3. Crown and Buckle keyring Springbar tool" I think it's safe to assume watch strap swaps happen frequently!
/u/ThaSkeptic have you considered switching to quick release/quick change spring bars instead?
You can switch out the straps on your current watches with an $8 watch tool, and put NATOs on them. Can't be sure, depending on your watches, whether you'd want to wear them to the beach, but changing out the strap works on any watch and definitely changes the look.
You can buy inexpensive kits on Amazon that make it easier to remove watch band pins and perform other simple repairs. IMO anyone who owns more than two watches should own one of these kits.
ah yes. I guess I thought you had once since you got the other band off. I have this one and it works fine
Ohuhu Professional 13 Piece Watch Repair Tool Kit Case Bonus a Hammer https://www.amazon.com/dp/B00PVN1DC0/ref=cm_sw_r_other_apa_vkYAxb8KCC8WQ
This is a decent one.
I bought some nice quick release spring bars from Amazon.
Edit: https://amzn.com/B00Q7XE866
Do you think this one would be good? http://www.amazon.ca/gp/aw/d/B00DJOXM3Q/ref=pd_aw_sbs_23_1?ie=UTF8&amp;dpID=51bBPKu-ZmL&amp;dpSrc=sims&amp;preST=_AC_UL115_SR115%2C115_&amp;refRID=0GA9SX7A9GYPQKA0KKTS
Or this: http://www.amazon.ca/gp/aw/d/B00PVN1DC0/ref=mp_s_a_1_4?qid=1454269235&amp;sr=8-4&amp;pi=AC_SX220_SY330_FMwebp_QL65&amp;keywords=Watch+tool+kit&amp;dpPl=1&amp;dpID=51ONDtMIHHL&amp;ref=plSrch
It's just a question of shipping
Sounds like the internal coil spring in the band pin may have broken. As /u/PMmeYrButtholeGirls said, they should be easily replaced. Something like this should work.
either of the two will keep time just fine.
as for the screwdriver, it's probably too thick for changing bands (there is often very little gap to work with). the Bergeron mentioned by the other user is a fine tool (best one i've got at the moment), if it's out of your price range you can start with this one for about $5, it's on par with the free ones that are often shipped w/ straps, but be warned the metal is soft and it won't last particularly long, or after removing the first strap, be sure to only replace them with quick-release comparable straps which require no tools but will be a little more expensive and limited in selection. If you're going to do nothing but nato, then you shouldn't need any tools after the first time. You could also start off with sourcing your first strap from a place that offers a free spring bar tool.
Hey there, just went through this. In case you have this happen again, you probably didnt need to return you Quest. This stuff is supposed to take all the stuff out of the lenses and make them look better than new. I'll let you know how it works. My rift s and Quest are both scratched cause of this. My Go also never did this this severe, in a short span of time despite hitting the lenses multiple times. https://www.amazon.com/gp/product/B00E3T237C/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
FYI, you'll have to buy a tool to exchange the straps. Amazon has them for $6 here:
http://www.amazon.com/Spring-Bar-Tool-Set-5in/dp/B005ZEWGSA/ref=pd_rhf_gw_p_img_9
To add to this, there are plenty of Seiko 5s under $100 that meet your criteria, such as this one or this one.
To answer your other question, you can remove links from the band quite easily at home with a few inexpensive tools
Looks like a Bergeon 6767-F, which you can buy from [Amazon] (https://www.amazon.com/Bergeon-6767-F-Watch-Spring-Tool/dp/B001IZT8R2) or [this other site] (http://www.esslinger.com/bergeon-6767-f-watch-band-tool-swiss-spring-bar-tool/). The 6767-F has a small fork and pin-pusher type deal which are both screwed in place. In my experience, they come loose when you're finagling a stubborn springbar or something.
I'd recommend one with collets holding the tool ends in place, like [this one from Otto Frei] (http://www.ofrei.com/page_226.html) or the one right below it which is a Bergeon 6111. They both have a combination small fork/pin-pusher and a larger "spade" on the other end for better prying action to reduce the chance of scratching.
When posting amazon links you can remove everything from /ref forward, it removes the tracking data. like this:
https://www.amazon.com/Plastic-Crystal-Scratch-Remover-Polish/dp/B00E3T237C
Always good to see more of Sinn! I hear Polywatch works wonders for the acrylic scratches.
I'm going to give this one: https://www.amazon.de/Polierpaste-polyWatch-Polish-2015-Uhrengl%C3%A4ser/dp/B00E3T237C/ a try... hope its the right one!
Would it be safe to use Polywatch to fix a mini scratch on my Nintendo Switch?
It is this!
https://www.amazon.com/dp/B00E3T237C/ref=cm_sw_r_oth_api_KcC4ybQQXF9GM
If you can't get it fixed through Nintendo, this stuff works very well for getting the scratches out. I used it after I got a few small scratches playing The World Ends with You, and it seemed to get them right out. Now I have a screen protector on there.
Why not get a brown strap and swap them as needed? It's really easy if you have a tool.
I bought this one on amazon for ~$6 and it worked quite well.
http://www.amazon.com/Spring-Bar-Tool-Set-5in/dp/B005ZEWGSA/ref=sr_1_1?ie=UTF8&amp;qid=1425232960&amp;sr=8-1&amp;keywords=spring+bar
There is a polish you can buy cheaply. It's made for watch faces and does a really nice job.
https://www.amazon.co.uk/gp/product/B00E3T237C