Reddit mentions: The best wheel adapters & spacers

They are aluminum, Ill see if I can find them online and link them, but my buddy originally bought them and sold them to me. Like I said, theyve been on my ranger, my explorer, and his jeep as well. I highly recommend them, if youre interested in the stance. You do need an alignment afterwards though.

Edit: These pretty much look exactly like mine. Im not sure about the great handling it says it gives, but my wheel turn radius is pretty nice.

I put a set of wheels from a 2008 Sahara on my 2000 TJ. I don't know the backspacing and other measurements off hand, but the overall dimensions should be close to what you are running. I posted a pic of my jeep with the wheels on it in this sub a little while ago.

Here are the adapters I bought. https://www.amazon.com/gp/aw/d/B06WLN2ZF8?psc=1&ref=ppx_pop_mob_b_asin_title

At first I thought the spacing was going to be too much. But, once I had them on the jeep I realized that the larger adapter stops rubbing on the arms at full lock. My JK wheels fit great and don't rub. I suggest you get a larger adapter than one and quarter inch.

They are the $80 Amazon ones made by custommadeonly in black, and the tires are the standard 245s. It's a 2017, but it only had 16k miles when I purchased it....17.5k now, so the tires are still excellent. I believe if you are interested you can look in my profile and see a previous post with close ups of what the fitment looks like.


I'll try to link the spacers.
https://www.amazon.com/Customadeonly-HUBCENTRIC-SPACERS-ADAPTERS-5X114-3/dp/B06XKKNV1T/ref=mp_s_a_1_4?keywords=20mm+wheel+spacers+wrx&qid=1562687674&s=gateway&sr=8-4

Well, the solution is two-fold. You need to find spacers that fit the car, and be sure that the wheels will fit with them too. Here are some A3 spacers. Unfortunately, without more information on the wheels, there’s still some uncertainty as to whether they’ll fit, even with the spacers. If the wheels don’t match your bolt pattern, then it won’t matter if you buy spacers. Your car’s bolt pattern is on the Amazon page for the spacers. Here’s a way for you to check the bolt pattern of the wheels. If the bolt pattern doesn’t match up, that’s much more difficult to address, and you’d be better off selling the wheels and looking for another set.

Some basic cheap steelies

Vision 84 D Window 16x8 6x139.7/6x5.5" -12mm Gloss Black Wheel Rim https://www.amazon.com/dp/B01MXZT4QN/ref=cm_sw_r_cp_api_i_zWFmDbZ3WFQ0H

Along with spacers - Spidertrax WHS007 Blue Wheel Spacer Kit https://www.amazon.com/dp/B00BGRDMOM/ref=cm_sw_r_cp_api_i_R0FmDb97Q18P7

With bf good rich mud terains 285 75 16

Jeep JK XK WJ WK Wheel Spacers 1.5" 4pcs, Jeep 5x5 / 5x127 Wheel Spacers with 1/2-20 Studs for 2007-2018 Jeep Wrangler JK, 1999-2010 Grand Cherokee WJ WK, 2006-2010 Commander XK https://www.amazon.com/dp/B01MYYY0P3/ref=cm_sw_r_cp_apa_qvcVBbDZQZCH9

Going to get [spacers](http://www.KSP.com/ Forged Hubcentric Wheel Spacers 5x100 5x112, 20mm Thread Pitch M14x1.5 Hub Bore 57.1mm with Sphere Seat Lug Bolts Fit for Audi A3 A4 A6 A8 S4 S6 S8 Quattro TT Volkswagen, 2 Years Warranty (5 Lug) https://www.amazon.com/dp/B07KQ6QFN7/ref=cm_sw_r_cp_apa_i_CQ1vDb7D39XH7) to make them fit. I have 2 bad rims (OG Detroit's) right now and I'm going through tires like crazy. Wanted to get a 4 set of new tires and these don't look bad.

Just want to be sure the fit, spacers, and bigass sidewalls will be ok for a few months before I get some thinner tires.

I recently did exactly that (3 inch lift, 31s). If you're looking for ideas or reference, here is "Jade". (Mall parking lot of course. Havent taken her out since I did it)

I did it relatively cheap as far as lifts/tires/rims go. List goes as follows:

BFGoodrich All-Terrain T/A KO2 LT31X10.5R15 - $175 x 4 = $700

Pro Comp Steel Wheels 15x8"/5x4.5" $55 x 4 = $220

3 in Rough Country lift $293

Hubcentric Wheel Spacers $27.50 x4 = $110

They installed my lift at Mavis for $390 labor. It was a pretty fair deal.

All in all ~$1700.


I'm about to get a pair of Smittybilt bumpers this week.

Warning. Your fenders will rub. I'm cutting and putting flares on because I need them anyway for legal reasons.

>5x112 bolt

cant i just use this? i dont have much experience on rims but i really want my audi to look like that picture above!

4pc 2.0" Hubcentric Wheel Spacers 5x5 to 5x5 | for Jeep Grand Cherokee Commander Wrangler XK JK WK https://www.amazon.com/dp/B00A86YXS6/ref=cm_sw_r_cp_apa_raB4xbG5MT030

Get some wheel spacers, I think these fit.

2pcs 25mm (1 inch) Hubcentric 4x114.3 Wheel Spacers (66.1mm bore, 12x1.25 Studs) For 4-Lug Nissan 200sx 240sx 240z 260z 280z 280zx 300zx Altima Maxima Sentra Cube (4x4.5) https://www.amazon.com/dp/B00A837PFW/ref=cm_sw_r_cp_api_i_OTkpDbV30EZ2Z

Use wheel spacers with a spring spacer. Something like these (but measure your springs and get something that actually fits).

Rubber Coil Spring Spacers, Pair (2) https://www.amazon.com/dp/B075NRCL8W/ref=cm_sw_r_cp_api_i_2UkpDb4YECF42

Use the spring spacer to get a 3/4” lift or so from your struts. Use wheel spacers to push the wheels out a little. You should be able to fit a tire that’s 1”-2” taller than factory.

I ended up having to get a couple different width wheel spacers, 1 1/4” on the front and 1-1/2” on the back but I think I need 2” on the back. A lot of this will be trial and error. That’s part of the fun!

5x114.3 3mm wheel spacer

https://www.amazon.com/Hubcentric-5x114-3-Spacers-Integra-Element/dp/B00A4QFY4M

Slap those on both front wheels and you'll be good. This is a common issue with people that do this swap.

No problem!
These are the ones I ordered. I believe the same company makes a couple different sizes.

Supreme Suspensions - (4pc) 1999-2004 Jeep Grand Cherokee WJ 1.25" Hub Centric Wheel Spacers 5x5" (5x127mm) with Lip + 1/2"x20 Studs [Black] https://www.amazon.com/dp/B019YTXFV8/ref=cm_sw_r_cp_apap_xatLXQZ51htNX

I was recommended these on another forum: https://www.amazon.com/5x110-5x114-3-5x4-5-Adapters-Spacers/dp/B00HQPGOAM

So with these, and the wheels themselves I should be good to go, or am I missing anything?

15mm

https://www.amazon.com/KSP-Spacers-Hubcentric-Volkswagen-Warranty/dp/B07KQ6RFS6/ref=mp_s_a_1_3?keywords=57.1+5x112+spacers&qid=1550593024&s=gateway&sr=8-3

And

20mm

https://www.amazon.com/KSP-Hubcentric-Spacers-Volkswagen-Warranty/dp/B07KQ6QFN7/ref=mp_s_a_1_2?keywords=57.1+5x112+spacers&qid=1550593024&s=gateway&sr=8-2

Use wheel adapters!

https://www.amazon.com/dp/B07P7B3F71/ref=psdc_15706591_t1_B009N3JTQQ

KSP M12X1.25 Wheel Studs Lug... https://www.amazon.com/dp/B07JGNR83L?ref=ppx_pop_mob_ap_share

Hey, I've got the same tires!

Also, try these. I'm putting them on my rearend, which is off an 84 Camaro apparently, if I don't end up swapping the whole rearend first...

The lug studs come out an inch and there aren’t gaps in the rim

https://www.amazon.com/dp/B01FHICNH2/ref=cm_sw_r_cp_api_i_6i34CbHS2S03V

Link