Reddit mentions: The best body repair paint tools & equipment
We found 37 Reddit comments discussing the best body repair paint tools & equipment. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 24 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. 3M Accuspray ONE Spray Gun System with Standard PPS, 16580
- ONE GUN FOR ALL PAINT SPRAY NEEDS – 3M Accuspray original handheld HVLP paint gun works with original PPS or PPS 2.0 disposable lids, liners and nozzles to measure, mix, filter and spray a variety of paint materials
- ALL-INCLUSIVE PAINT SPRAY KIT – Includes 1 Accuspray spray gun, 4 nozzles (1.2 mm, 1.3 mm, 1.4 mm, 1.8 mm), 1 plastic paint cup, 1 collar, 5 disposable lids (4 with 200-micron filter, 1 with 125-micron filter), 5 disposable liners, universal mix ratio insert and sealing plugs. Air compressor and hose coupler not included
- PICK YOUR PROJECT – Comes with 22-ounce standard-size cup, ideal for any painting project including cars, boats, furniture, equipment, cabinets, arts and crafts
- VARIETY OF MATERIALS – The different nozzle options allow you to spray paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more
- LIKE-NEW PERFORMANCE AGAIN AND AGAIN – With replaceable atomizing heads, you get the performance of a brand-new gun each time you replace the nozzle
- 360 DEGREE PAINT RANGE – When used with included PPS cup system, you can consistently spray at any angle, even upside down
- LESS WASTE, MORE EFFICIENCY – Less paint waste, mess and contamination than traditional methods. Use up to 70% less cleaning solvent, and shorten prep and cleanup time by as much as 50% compared with conventional metal paint cup systems
- For industrial/occupational use only. Not for consumer sale or use.
Features:
Specs:
Color | Accuspray Paint Spray Gun System with Original |
Height | 6 Inches |
Length | 6 Inches |
Weight | 1.4 Pounds |
Width | 6 Inches |
Release date | January 2016 |
Size | PPS, 16580, Standard, 22 Ounces |
Number of items | 1 |
2. 3M 90000 Paint Defender Spray Film
- Invisible, seamless protection applied as a liquid and dries to a continuous clear film
- Removable and safe for clear coat
- Contains one can of paint guard spray film 175 ounces and one 1 ounce packet of 3M performance finish synthetic wax
- Protects for over 1 year
- Protects any painted surface such as hoods, bumpers, fenders, mirrors, rocker panels, and more
- For industrial/occupational use only. Not for consumer sale or use.
Features:
Specs:
Color | Clear |
Height | 9.563 inches |
Length | 2.625 inches |
Weight | 1.382 pounds |
Width | 2.687 inches |
Release date | March 2013 |
3. Red Line EZ50 Powder Coating Cup Gun
- Brand New Model! Truly portable unit - No control box or extra wires!
- Full adjustable up to 50 KV directly on the back of the gun
- ForceFeed technology for the perfect volume
- Light weight and perfectly balanced gun for optimum comfort
- Includes 1/4" NPT US Air Line Adapter!
Features:
Specs:
Color | red |
4. Dualco Grease Gun with Short Nozzle
- RaceFace
- Narrow Wide Direct Mount CINCH Chainring
- Direct Mount Chainrings
Features:
Specs:
Color | Silver |
Height | 2.25 Inches |
Length | 8 Inches |
Weight | 0.25 Pounds |
Width | 5.25 Inches |
Number of items | 1 |
5. Spray Gun for Use with Small Air Compressors By STAR
for use with Small air compressors of 1/3 HP or More.uses internal mix air capsoperating pressure 40-PSI-50PSIPressure-feed gun convertible to siphin feed gunFluid control regulates amout of paint sprayed
6. Tacklife SGP15AC Advanced Electric Spray Gun 800ml/min Paint Sprayer with Three Spray Patterns, Three Nozzle Sizes,Adjustable Valve Knob, and Easy Filling 900ml Detachable Container
THREE SPRAY PATTERNS AND THREE NOZZLE SIZES - it can be adjusted to three different spray patterns :horizontal flat jet, vertical flat jet and circular jet; and with three nozzle sizes(2. 5mm/ 2. 0mm/ 3. 0mm), you can choose the fittest one for your different work needsAdjustable valve knobs & 5...
7. DeVilbiss DPC8 Spray Gun Cleaning Bottle - 16 oz. Capacity
- 16OZ SQUEEZE BOTTLE (DEV-DPC8)
Features:
Specs:
Color | Factory |
Height | 7 Inches |
Length | 4 Inches |
Weight | 0.15 Pounds |
Width | 4 Inches |
Number of items | 1 |
8. TCP Global 2-1/2 Gallon - (10 Liter) Pressure Pot Paint Tank with Regulator Pressure Gauge for Large Volume Painting and Autobody
Heavy duty paint pressure pot tank with 2.5 gallons (10 liters) capacityClamp on lid with gasket; Fluid pressure regulator with gaugeWorking pressure: Optimal 25-30 psi; Air inlet and outlet: 1/4"; Fluid outlet: 3/8"Excellent for Commercial Painting or Situations where a large amount of spraying is ...
Specs:
Weight | 14 Pounds |
Size | Pressure Pot |
9. Al's Liner ALS-SG2 Professional Series Pneumatic Air Texture Spray Gun
- 1.25 gallon gravity fed hopper included
- 3 texture orifices to spray liquids of different viscosity, including walls and ceilings
- Comfort grip handle for an easy grip hold; includes locking trigger for uniform coating
- Durable spray gun with metal handle and solid brass air regulating components
- Great for spraying Truck Bed Liners, Acoustics, Ceiling Textures, Drywall Mud, Stucco
- Also great for waterproofing, Interior and exterior applications, Texure finishes, Pool Deck Sealants….Most Gravity Fed Materials
Features:
Specs:
Color | Regular |
Height | 13 Inches |
Length | 9.5 Inches |
Weight | 3 Pounds |
Width | 9.5 Inches |
Release date | October 2011 |
Number of items | 1 |
10. iK FOAM 1.5 PUMP SPRAYER | 35 oz | Professional Auto Detailing; Dry / Wet Foam Spray
- Quickly create a thick layer of cleaning foam!
- Easy pump and spray application
- Great for detailers with water restrictions
- Three mixers allow for 3 types of foam, Wet, Medium, and Dry Foam
- 50oz. Reservoir
Features:
Specs:
Height | 11.81102361 Inches |
Length | 8.267716527 Inches |
Weight | 1.17065461122 Pounds |
Width | 6.299212592 Inches |
11. 3M Accuspray Spray Gun Kit HGP, 16587, 1 per case
3M Marine 16587, MMM16587.Pressure Cup not inluded, sold separately.
Specs:
Color | Red/Black |
Height | 2.75 Inches |
Length | 11 Inches |
Weight | 0.5625 Pounds |
Width | 8.25 Inches |
Release date | June 2014 |
Size | Standard |
Number of items | 1 |
12. woolwax Lanolin Vehicle undercoating kit (4) Quarts w/PRO Gun & (2) Extension Wands. Straw (Clear) Color
No odor. Non Drip Formula
Specs:
Height | 50 Centimeters |
Length | 100 Centimeters |
Width | 100 Centimeters |
13. CARTMAN HVLP Gravity Feed Air Spray Gun 20.2 oz Capacity, 3.0-4.0 CFM (Cubic feet per Minute), Optimal Working Pressure 2bar/29psi, Nozzle Size:1.3mm with Air Regulator
- The new Cartman HVLP (High Volume Low Pressure) Air Spray Gun is designed to obtain a professional finish quality with low overspray and exceptional performance.
- Built-in 3 control knobs: Fluid control regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow. Each adjustment knob has been individually calibrated by our technicians to give you the best possible paint application.
- The specially designed nozzle enables to minimize overspray on the edges and increase transfer efficiency of the coating materials to the surface (up to 85%). With HVLP technology you also get a significant material savings, which is up to 30-40%.
- Filter ensures clean paint, helping you get the best end result. Comfortable handle, easy-pull trigger, stainless steel nozzle and needle, solid brass cap, ensure durability and longevity.
- Set includes: 20.2 oz (600cc) nylon cup, metal air regulator, a cleaning brush, a clamp for atmolysis ring, a plastic filter, a multi-size wrench. Nozzle size 0.051 inch / 1.3mm. Recommended working pressure 2.0bar(29psi).
Features:
Specs:
Size | H-899 S/Steel w Regu. |
14. 3M 90201 Paint Defender Spray Trigger
- Makes spraying easier
- Easy attachment to any aerosol can
- Comfortable handle eliminates hand fatigue
- For use with 3M paint guard spray film
- For industrial/occupational use only. Not for consumer sale or use.
Features:
Specs:
Height | 1 Inches |
Length | 5 Inches |
Weight | 0.02 Pounds |
Width | 5 Inches |
Release date | February 2013 |
Number of items | 1 |
15. TCP Global Pressure Tank Paint Spray Gun with 1.5 Mm Nozzle 2-1/2 Gal. Pressure Pot & Spray Gun with Hoses
2 1/4 Gallon CapacityTank hoses are included roughly 6 feet long (you can add your own to make it longer)Heavy-Duty Spray gun is includedAir regulator is included
Specs:
Weight | 24.03 Pounds |
16. DeVilbiss 802343 Auto Painting/Priming Kit
Auto Painting/Priming SystemBasecoat, Clearcoat and Topcoat Spray GunSealing and Priming Spray GunThis 2 Gun System is perfect for the Handyman, Craftsman, Hobbyist and the Do-It-Yourselfer!It allows you to Spray the Full Spectrum of Coatings for any size Project Large or Small.
Specs:
Color | Factory |
Height | 4.5 Inches |
Length | 13.7 Inches |
Weight | 3.63 Pounds |
Width | 13 Inches |
Number of items | 1 |
17. Iso-Tip 7975 Micro-Therm Flameless Heat Gun
Piezo electronic ignition system with safety locking switch.1300 degrees Farenheit flameless heat.Offers 20 minutes of continuous use.Windproof catalytic heating element and waterproof ignition.Comes with deflector and cartridge.
Specs:
Height | 4.5 Inches |
Length | 1 Inches |
Weight | 0.2 Pounds |
Width | 3.2 Inches |
18. Blair 51000 Paint Shaker
- Mixes paints completely utilizing three axis of motion, including orbital, side-to-side, and up/down
- The fewer moving parts minimizes noise while the paint shaker is in operation
- A quick and easy to use four point clamping mechanism securely holds containers during the agitation cycle
- Blending cycles can be set to numerous time intervals via the convenient up-front control panel
- Lightweight, only 24 lbs.
Features:
Specs:
Color | CHROME |
Height | 11.5 Inches |
Length | 26 Inches |
Weight | 3.15 Pounds |
Width | 15.375 Inches |
Size | One Size |
Number of items | 1 |
19. TCP Global Brand HVLP Spray Gun Set - 3 Sprayguns with Cups, Air Regulator & Maintenance Kit for All Auto Paint, Primer, Topcoat & Touch-Up, One Year Warranty
Spray the Full Spectrum of Coatings Using this Quality 3 Gun Set of High Performance HVLP Spray Guns. You Get All the Premium Features and Benefits, without the Premium PriceSpray Base-coats, Clear-coats, Single Stages, Primers and More. Guns Provide Fully Atomized Spray Patterns, So You Can Achieve...
Specs:
Height | 5 Inches |
Length | 17 Inches |
Weight | 10 Pounds |
Width | 14 Inches |
20. Typhoon Blow Gun 1/4" NPT W/High Flow Tip
High StrengthAcme Automotive
Specs:
Height | 2.25 Inches |
Length | 10.5 Inches |
Weight | 0.2 Pounds |
Width | 5.75 Inches |
Number of items | 1 |
🎓 Reddit experts on body repair paint tools & equipment
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where body repair paint tools & equipment are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
silly question, but how many 1" square clasps do you have to coat at once? As u/the_crx states, the Eastwood gun is fine, but has some build limitations for longevity. Great starter type gun, and also good for quick colour changes, small things, etc.
RedLine makes a next step up. A bit sturdier. I'm sure you can find them cheaper, as I'm just looking for quick links. The advantage to this cup-gun being on the bottom is there is less spitting. It means more when doing candy, clears, effects.
Columbia has the next step up. Now we're getting into similar to job-shop type of coating guns. One of the styles, is drawn from a fluidized bed (the other is a stick-feed). Larger batches, smoother finishes with no regard to how the gun is held. Variable Kv. Things get easier with these types of models. BUT, cleanup and care is a bit more in-depth.
After this, we are really stepping into pro-user territory. More options, better flow, ergonomic and accountable for years without issue. My favorite in the lower price point is the Nordson. It's a good solid gun. If you have the money, though. I'd be going after a Gema gun. I've used them for almost three decades. They simply perform at the upper tier.
Best of luck in your search. Let us know what you chose!
Bottom feed paint gun + Plastic horn
I've never seen them before, but they look like they could be helpful at times.
I get by with a few hundred:
Even better, once you've got a 20-30 gal compressor, you get to experience the joy of air tools!
You should easily be able to find a 2-quart hand pump sprayer: Amazon link to a $9 cheapie, but I wonder if it will foam properly. If not there are more expensive versions that specifically mention foam, like this $33 one from The Rag Company
I bought this guy and it looks and sounds very similar the one in the video.
Tacklife SGP15AC Advanced Electric Spray Gun 800ml/min Paint Sprayer with Three Spray Patterns, Three Nozzle Sizes,Adjustable Valve Knob, and Easy Filling 900ml Detachable Container https://www.amazon.com/dp/B06Y3QKQY4/ref=cm_sw_r_cp_api_i_RoN7CbXWVPMFB
Have been happy with it. Used it to spray my kitchen cabinets.
No problem, in no particular order of relevance, a few other great ones to consider are:
Knipex Pliers Wrench - My single favorite tool ever
Felco C7 Cable Cutters - You can usually find these used and sharpened for $20 on eBay
Dualco Grease Gun - Your bike needs grease, this makes it easy
Motorex 2000 Waterproof Grease - Can grease be beautiful? I think so. Exactly like the Dura Ace grease
Wera Hex+ Keys - I know you have some already, but the slightly scalloped faces of these "hex plus" keys really do allow you to remove very stuck fasteners without stripping, and I have even removed bolts stripped with standard keys
3M Has a great disposable gun with multiple tip sizes.. you’ll need to buy their liner system as well.. Harbor freight has some decent inexpensive guns.. But if cost is not a factor Sata is always a good choice .. https://www.amazon.com/3M-16580-Accuspray-System-Standard/dp/B01497MZB6
I wouldn't exactly call it new. Amazon has been selling it since April.
And I would prefer use clear Plasti-Dip if I was just looking for something temporary, like a roadtrip. Mainly because I could buy 3 can of Plasti-Dip Glossifier for almost the same price.
These are great for water refills:
https://www.amazon.com/gp/product/B0025VR35C/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
3M makes a spray on Paint Defender film that is designed to be applied for up to one year. An actual clear bra would provide better protection, but would cost more and need to be applied professionally.
http://www.amazon.com/3M-90000-Paint-Defender-Spray/dp/B00BSKYM82
https://www.amazon.com/TCP-Global-2-1-Gallon-Regulator/dp/B00IK3TTMY/ref=mp_s_a_1_4?keywords=pressure+pot&qid=1562888173&s=gateway&sr=8-4
This is similar to the one I bought. Hoping that answers any questions:)
It has 3 out of 5 stars on Amazon. Hopefully someone in /r/AutoDetailing might try it out and give their opinion.
I used AL's Liner kit with the spray gun. It turned out great for less than $200. I sprayed it 4 years ago and hardly ever had my top on for many of those years. It has held up great and still looks killer. No areas are coming up even where there is high traffic.
http://www.amazon.com/gp/aw/d/B004OI3MNG/ref=mp_s_a_1_3/188-8601645-2489252?qid=1408395469&sr=8-3&pi=SY200_QL40
http://www.amazon.com/gp/aw/d/B004OI7H7S/ref=mp_s_a_1_1/188-8601645-2489252?qid=1408395469&sr=8-1&pi=SY200_QL40
Try something with a plastic air cap. Much more beginner friendly and cheaper to replace. One I started with was this or something very similar Accuspray 3M (16587) Spray Gun Kit https://www.amazon.com/dp/B00AJVE1ZU/ref=cm_sw_r_cp_api_i_e-mlDb6EFSAMK
Oil - Birchwood Casey synthetic gun oil, extremely slick and a tiny bit goes a long way
Grease - Mobil mobilgrease xhp 222, high temp extended service grease
I use a dualco mini grease gun for the grease, makes applying it super easy, a longer tip is handy but not necessary
https://www.amazon.com/Dualco-Grease-Gun-Short-Nozzle/dp/B0025UGOVW
If you're just looking for coverage, this is probably fine. For more detailed work it's probably going to be a pain in the ass. It's designed for painting larger surface like furniture and walls.
Automotive paint sprayers are probably a better bet. I actually bought this set recently. Having different nozzle sizes is helpful. Obviously you need an air compressor, but I though this was a better option long term then household paint sprayer.
How about something such as 3M paint defender. If your looking for something temporary this may be the way to go, and it wont look hideous.
Link
You'll need to buy a sprayer designed to foam such as this one:
iK FOAM 1.5 PUMP SPRAYER | 35 oz | Professional Auto Detailing; Dry / Wet Foam Spray https://www.amazon.com/dp/B01BLGDAVW/ref=cm_sw_r_cp_apa_ALTZAb8QBYC3N
https://www.amazon.com/iK-SPRAYER-Professional-Detailing-Spray/dp/B01BLGDAVW/ref=sr_1_1?s=automotive&ie=UTF8&qid=1523078705&sr=1-1&keywords=ik+foam
This one right here. https://www.amazon.com/dp/B07D6L7NTM/ref=cm_sw_r_cp_apa_i_XW5rDb182PSFM
Not OP, but I believe he was referencing this: link
Or just buy it yourself and DIY
is it this? https://www.amazon.com/3M-90000-Paint-Defender-Spray/dp/B00BSKYM82/
At $25, I might have to try that out too.
Yo dog: http://www.amazon.com/3M-90201-Paint-Defender-Trigger/dp/B00BHH1QT4
Of course, this thing gives me carpal tunnel from all the tunnels I'm bombing with it.
> It shows the pressure gauge, plus he's using standard poly air hose, not something that can handle vacuum.
You're correct that what he is using is a pressure pot, it's typically used for a paint gun(https://www.amazon.com/TCP-Global-Pressure-Paint-Nozzle/dp/B001Z0RAW0) However that calibre of hose just to point it out can be used for Vacuum.
I have a small table that has heavy poly on an aluminum frame that sits on canopy tape. A buddy of mine made this little box with regulators that creates suction on just a 2hp compressor and this is how I do odd shaped veneer bends that I can't wrap on a jig. I've also used it to sink resin in like large knot holes and to deeply penetrate cracks and such on door faces and it works well. I've used this particular system years ago which is what we copied and while it's somewhat expensive on the site, it was cheap to make at home https://www.vacupress.com/vacuum-pressing-bag-system/
DeVilbiss 802343 Auto Painting/Priming Kit https://www.amazon.com/dp/B001G4ZTVE/ref=cm_sw_r_cp_apa_i_Jf15Cb0BFQMKE
I was looking at this one. What do you guys think?
https://www.amazon.com/gp/aw/d/B0002V2FEQ/ref=ox_sc_act_image_1?smid=A1JX5VIUKL6HSF&psc=1
> I don't think that you could earn much more than that unless it was constantly in motion.
Ya, I've got that covered. This is why we can't have nice things.
They just push on to the end of the standard (non-OSHA) blowgun to make it compliant.
I prefer to use a purpose designed high flow safety blow gun. It's cheaper than the snapon and no little tips to lose.
It really depends on what you're going to be doing. Sadly paint guns don't really come in one size fits all. If I was just starting out again I'd look really hard at this set: https://www.amazon.com/dp/B001N1E9Y8/ref=cm_sw_r_cp_apa_i_JBriDb5CJ85X2
It may seem a bit pricey, but this set should cover about 90% of what you would do for paint on a car.
I found 3m has a new product they call Paint Defender and got an idea that I'd like to try on my VW.. Thoroughly clean and wax the front end, mask off what I don't want to cover and spray several layers of clear pastidip. Not sure if it'll stay clear for very long, but figure worst case I'll peel it off.
Wrong one. You want the "Foam" one: iK FOAM 1.5 PUMP SPRAYER | 35 oz
https://www.amazon.com/iK-SPRAYER-Professional-Detailing-Spray/dp/B01BLGDAVW/ref=sr_1_2?keywords=iK+Foam+1.5&qid=1550003703&s=gateway&sr=8-2
The other is just a sprayer.