(Part 2) Reddit mentions: The best screw guns & power screwdrivers

Just watch a few videos, You can use crimp if you want but for the whole house I would use Uponor

https://www.amazon.com/Milwaukee-2432-22-12-Volt-Propex-Expansion/dp/B0048EJX7U/ref=sr_1_4?crid=17LFIV7JS4V&keywords=pex+uponor+tool&qid=1564066327&s=gateway&sprefix=pex+up%2Caps%2C192&sr=8-4

After you are done with this you can sale it on ebay for at least 250-300.

​

https://www.amazon.com/s?k=Uponor&ref=bnav_search_go ( Fittings)

You get better flow through it because it expands the pex to fit the fitting in.

Crimp has a smaller ID fitting.

​

​

If you want a single manifold you are going to be running a lot of line,So I would order at least 500 foot of each blue and red.

Maybe even a 1000.

You could do a manifold on each floor and save your self alot of work and line.

​

Remember to get nail plates to put on any studs you go through.

​

Get a good drill with a hole saw, or spade bit.

​

It is super easy to work with.

​

I would guess you could spend $2500 and get maybe 500 back if you sell the extras after you are done.

You don't want to only order 250 feet of pipe get started and have to go back to the store to get more. Grab a bunch of every fitting you can think of. Then just take back what you don't need.

You don't actually need a drill, there are hand drills on Amazon that hold a bit. Heck, you can even just carve out the hole with a bit in your hand, or just an exacto knife.

As others have implied, if you aren't skilled yet and don't have much money, this is actually the best time to learn how to magnetize.

If you need more recommendations on what exactly to do, and what tools to use, just ask. The community is here for you.

Edits for links to el cheapo drills which work awesome for magnetizing:

https://www.amazon.com/GPSGO-Precision-0-5-3-0mm-Electronic-Assembling/dp/B07PCNDFLV

The best option is these two items:

https://www.amazon.com/Tacklife-SDP51DC-Cordless-Rechargeable-Screwdriver/dp/B075RWV5LB

https://www.amazon.com/COMOWARE-Titanium-Twist-Drill-Bit/dp/B07D9J6JLD

Note that for mini cordless drills you need bits with a 1/4" hex shank to fit into the chuck of those drills. I used a set up like those two items to magnetize 10 firewarriors and 10 pathfinders in the span of a out an hour. If I can do it, you can do it.

I know it's not home depot but I am in love with the tool I recently purchased off Amazon.

It's a cordless screwdriver that has an internal holder for the bits, you pull back on the top of the screwdriver and twist the bits around until the one you need is at the top and close the screwdriver back up. It also has a really nifty screw holder to make starting screws easy, You can be holding what you are working on with one hand and use the screwdriver in the other without needing to hold the screw you are starting.

https://www.amazon.com/dp/B00ZFR4JA0/ref=cm_sw_r_cp_ep_dp_hyDEAb8WTB6E9

I'd never use an impact for that - mostly machine screws? I just recently shopped for and got a screwdriver and I feel like I looked at most of what's out there. Its sort of neglected by many tool makers. Here is what I found - more than likely you're looking at a 12v tool, I don't recall even seeing an 18v screwdriver (which is essentially a drill driver with an impact-like quick change chuck).

Milwaukee does have the biggest range - but I see you've not had the greatest experience with them. The single speed driver is limited to 500rpm as you've said, but they make a 2 speed, brushed, and brushless which may serve you better. If I was going to use one all day I'd get the brushless. You may already have some batteries and chargers, so it may make sense to stay Milwaukee. Plus you could get a 1/4 or 3/8 12v ratchet on the same battery which may be useful to you.

Other offerings are few and far between. DeWalt has a decent 12v screwdriver, but its only brushed, it uses a slide pack which makes it a bit bulkier, but the hand grip is a better shape as it does not have batteries in the grip - may be better for your hands.

Makita used to offer a 12v screwdriver in its white compact pistol grip platform, but its hard to find anymore. They don't seem to be doing anything with this line, as they also have their slide-pack 12v line, and I think this is just going to die on the vine.

Bosch seems to be paying attention to this however. They have a nice 2 speed driver, but brushed. They also make a right angle driver for tight spaces - same 12v battery. And they just started offering a 12v drill driver with interchangeable heads - so you can have drill chuck, a hex chuck, and offset hex chuck, and a right angle adapter. If you don't want Milwaukee then I think this one is your best choice.

Ridgid does not have a screwdriver in their 12v pistol form factor, but their drill is noticeably smaller than Milwaukee's and I suppose you could put a quick change chuck into the regular chuck - but makes it longer. Not brushless either. They do have a clever palm screwdriver on the same battery for tight places.

Beyond that - Metabo? Hitachi? Panisonic? I did not look at them.

Congrats on the new job. I hope it works out for you. Here's some advice that I give to every new face that I see in the shops that I've worked at over the years. Get your tools from Sears or similar, stay the hell off the tool trucks until you've been doing this for at LEAST a year and know that it's what you want to do for a career. I've seen a lot of guys get into this business, drop $15k+ on the Snap-On truck only to decide 3 months later that fixing cars sucks and they don't want to do it anymore. All that aside, here's the list;

Ingersoll-Rand 2135Ti impact gun

6-point, deep-well impact sockets sized 10mm-24mm. (working at Kia 19 and 21 will be your most commonly used ones)

3/8" drive ratchet (the longer the better, flex-head is a plus but not requred)

3/8" drive, 6-point, shallow chrome sockets sized 8mm-19mm

1/4" drive ratchet

1/4" drive, 6-point, shallow chrome sockets sized 5mm-14mm

Air pressure gauge/tire inflator

Phillips and flathead screwdrivers in assorted sizes

Magnetic drain plug removal tool (this thing, https://smile.amazon.com/ABN-Magnetic-Transmission-Drain-Removal/dp/B01LY5G5MX/ref=sr_1_3?s=automotive&ie=UTF8&qid=1520451552&sr=1-3&keywords=magnetic+drain+plug+tool)

rechargeable LED flashlight with spare battery and charger (Streamlight arguably makes the best ones)

Pliers (in various shapes and styles)

Telescoping magnet-on-a-stick fastener/tool retriever (even the cheap ones near the cash registers at most auto parts stores are worth their weight in gold)

a toolbox of some sort to keep your tools in (I'd recommend getting a toolbox from Harbor Freight)

(optional) 3/8" drive air ratchet

(optional) 1/4" drive air/cordless ratchet

(optional) cordless screw gun (similar to this, https://smile.amazon.com/Tacklife-SDP50DC-Cordless-Rechargeable-Screwdriver/dp/B073536KXJ/ref=sr_1_6?ie=UTF8&qid=1520451920&sr=8-6&keywords=cordless+screw+gun. The one I use is made by Rockwell)

Not exactly a tool but I'd strongly recommend wearing ear protection (foam ear plugs is fine) while you're working in the shop. It may not seem all that loud, but hearing damage is cumulative over time and my hearing isn't anywhere near as good as it was when I first got into this business nearly 20 years ago. You may also want to invest in a creeper, or build one yourself (https://www.youtube.com/watch?v=HRBsxsEb_Gg) as it makes working on the ground a lot more pleasant. I know you're going to have a lift at the dealership, but there may come a time when you've got to work on something that you can't lift safely for one reason or another and you've got to still get underneath it.

Also, before I forget, there's a piece of advice that the guy who taught me how to do this job gave me when I was new, and I've given it to all the newbies that I've come across. The advice was this; Mistakes are tolerated, so long as they are not repeated. In other words, if you fuck up, admit that you fucked up and don't do it again. Also, don't be afraid to ask questions of the other people you work with. Most guys are more than happy to teach the new guy how to fix a car.

Hope this helps. Good luck at your new job. If you've got any questions, feel free to ask.

I'm not sure exactly which size Philips head you're looking for, but iFixIt sells nice tools for electronics work. You can get some individual drivers, but they mostly seem to carry sets, eg:
http://www.ifixit.com/Tools/iFixit-Epic-Screwdriver-Set/IF145-188
http://www.ifixit.com/Tools/54-Bit-Driver-Kit/IF145-022
They don't list these as having magnetic tips, but they do also sell a magnetizer:
http://www.ifixit.com/Tools/Magnetizer-Demagnetizer/IF145-029

Alternatively, if you don't need the smaller or more specialized bits (just, say Philips #1 and #2 - which is totally sufficient for building a normal desktop), you can get reasonable tools from a hardware store (eg. Home Depot, etc.). If you're just doing electronics work (building computers, etc) with them, you won't even need particularly expensive tools, since there's no need for construction-level durability.

Personally, I use an "HDX" branded set, which were very cheap, have magnetized tips and comfortable grips, and work well for electronics and light fixing work. (Their Philips head drivers do cam-out pretty easily on harder to drive screws, though, so they wouldn't be my first choice for more intense work.)

Edit: I might have misunderstood the 'electronic' part. You may be looking for something like this:
http://www.amazon.com/Black-Decker-9074CTN-3-6-volt-Screwdriver/dp/B0000302UJ
I've used one of these before and it's okay but far from ideal. It'll operate as either a battery powered or manual screwdriver, but it's uncomfortable to use in either mode. Unfortunately, the need to accommodate batteries is going to make any such tool annoying to use manually.

I got this as a gift years ago, and it has been awesome for anything I have used it for. High torque, low speed, and the battery lasts forever. Looks like its not available anymore, but maybe the newer models are just as good. This one seems like its replacement. I don't rack tons of stuff, but have used it for it.

depending on how much drywall you plan on hanging (or if you have other home improvement jobs like deck or floor work) buy one of these.

Also, like has already been mentioned, a drywall lift. I bought mine for like $125 on amazon and have used it to drywall 4 or 5 houses.

That is an excellent product. For just the screwdriver and bits, I really like the Xiaomi Wowstick.

Plus, you get the hilarious name and photo combination... I mean, they had to know, right?

https://www.amazon.com/dp/B07LDP31JZ/ref=cm_sw_em_r_mt_dp_U_8UnYDbD0FT9JD

So the only one I could find with pretty good reviews on it that is pink, but is pretty small. Put really, it will depend on that kind of work she is going to be doing with it. If it's just putting together some light furniture, it might be okay.

Though it you want good, can take a few knocks and will last a long time, Dewalt, is the way to go. I used one of these babies all through stage craft and it never broke down on me. Sadly though while the drill is in your price point, it's the bare tool, no battery or charging stations or bits. Bits are pretty easy to come by though, most will work with just about any drill. The Drill that can have exchangeable tips is VERY important. On the other hand, maybe somebody hell has thought about getting her one or it could be a group purchase. Either way though, if you have a little extra at the end, may I say though when you busy and don't have enough hands, a drill holster can be a life saver.

Sorry I'm so late, I was sick all of last week.

Thats a small electric powered screwdriver :D


its called the wowstick... LOL, aside from the name, its pretty handy for small stuff

https://www.amazon.ca/Wowstick-Electric-Screwdriver-Cordless-Lithium-ion/dp/B07H27G9NF/ref=pd_lpo_sbs_469_t_1?_encoding=UTF8&psc=1&refRID=AGJH4DQ2Q51J69TDBW93

You might be interested in something like this or this

They have cheaper ones similar to this if you go to Home Depot or Lowes. They're small, light, and perfect for driving in screws.

I'm pretty sure they rebranded most of their tools. Was is a precision screwdriver like this one? Was it a gun shape or stick? Did it have a light?

My bag is a knock off Maxpedition Jumbo, like this but in tan:
http://www.amazon.com/UTG-Multi-Functional-Tactical-Messenger-Black/dp/B002BJBIRW/ref=sr_1_1?ie=UTF8&qid=1374107930&sr=8-1&keywords=utg

In it I have

• Milwaukee M12 driver (in the back pocket) ttp://www.amazon.com/Bare-Tool-Milwaukee-2401-20-12-Volt-Subcompact/dp/B002N2XJ8I/ref=sr_1_10?ie=UTF8&qid=1374108007&sr=8-10&keywords=m12h
  
• Fluke LinkRunner Duo and tone probe http://www.testequipmentdepot.com/flukenetworks/network-testers/linkrunner-duo.htm
  
• Screw Bits, drill bits, and long extension for drill. The long extension is the important part here, helps deal with vertical finger wire managers.
  
• Klien 10 in 1 Screwdriver
  
• Flashlight
  
• Paladin Snips
  
• Sharpie
  
• Label Maker (in water bottle pocket)
  
• Spare Optics (Gig SR, 10G SR, COPPER - GLC-T can save your ass)
  
• Cage nuts and screws
  
• Bandaids
  
• Velcro
  
  I do design now but my job used to be to fly in and rack, stack, connect, and configure in a colo or to refresh in company owned locations. This was all I really needed to get by.

I will build a rack, unrack a server, rack a new server only a handful of times a year and going to the extent of having power tools at work to collect dust is just a waste.

Ultimately a regular screw driver can do it all, If you must get a power tool cause sometimes you may have a threaded bolt then get a what is called a "Electric Screwdriver" these are normally very small and will fit in your hand they are powerful enough to get you out of tricky places.

ex; https://www.amazon.com/BOSCH-Professional-Cordless-Electric-Screwdriver/dp/B00C09PS3S

And don't let anyone tell you that you don't need a motion-control screwdriver. It comes with several bits, and holds all the mini (4mm, 5/32" hex) bits that others have mentioned.

Pro tip: install the software updates as soon as you get it.

/s

(I've got one, but I'm a retired guy who likes to indulge myself.)

You’re welcome :)

Yes that chuck is proprietary to festool. Bosch, Milwaukee, Metabo and fein have similar drills with interchangeable chucks.

This is the closest to a 1/4” shank version.

https://www.amazon.com/Milwaukee-48-32-2100-Adaptor-Screwdrivers-Drivers/dp/B0000224AW/ref=asc_df_B0000224AW/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

This is what I use. Contains the security bits you'll need.

https://www.amazon.com/dp/B07B9RRL7C/ref=cm_sw_r_other_apa_i_NdR4DbJWVACG5

This is the tool.

https://www.amazon.com/Milwaukee-48-32-2100-OFF-SET-Power-Screwdriver/dp/B0000224AW/ref=sr_1_2?ie=UTF8&qid=1474247477&sr=8-2&keywords=milwaukee+angle+driver

Add a electric screwdriver on the end. A 1/4 drive bit socket holder on the other and it starts bolts all day.

The ES120 (Amazon) is probably the closest thing available to what you want, but it's very expensive

What about https://www.amazon.com/General-Tools-502-Precision-Screwdriver/dp/B00FAU547O/ref=sr_1_8?ie=UTF8&qid=1473107359&sr=8-8&keywords=mini+power+screwdriver

• http://www.amazon.com/gp/product/B001IHXFQK
  
• http://www.amazon.com/gp/product/B00GAVCNZI
  
• http://www.amazon.com/gp/product/B00B5RGAWY
  
• http://www.amazon.com/gp/product/B002N2XJ8I
  
• http://www.amazon.com/gp/product/B00CHU9ZDE
  
• http://www.amazon.com/gp/product/B0051D3MP6
  
• http://www.amazon.com/gp/product/B00INNP5VU
  
• http://www.amazon.com/gp/product/B001EIHY56
  
• http://www.amazon.com/gp/product/B0032XVNMQ
  
• http://www.amazon.com/gp/product/B002IT37Z6
  
• http://www.amazon.com/gp/product/B000CRFOMK
  
• http://www.amazon.com/gp/product/B007K4UKXG
  
• http://www.amazon.com/gp/product/B006V4WNYU
  
• http://www.amazon.com/gp/product/B007ACTN54
  
• http://www.amazon.com/gp/product/B0061LW0PK
  
• http://www.amazon.com/gp/product/B000EBFJXS
  

https://www.amazon.com/gp/aw/d/B0000224AW/ref=mp_s_a_1_4?qid=1458960337&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Skewdriver&dpPl=1&dpID=71EDJ5SVFBL&ref=plSrch

Not what OP used but this has been a part of my toolbox for 15+ years.