Reddit mentions: The best tool chests & cabinets
We found 84 Reddit comments discussing the best tool chests & cabinets. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 43 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Stack-On DS-39 39 Drawer Storage Cabinet
- 39-drawer storage cabinet contains 30 medium and 9 large drawers to organize and protect small items
- Wide gray frame with supports for extra strength
- See-through drawers with no-spill tab stops and easy-pull ribbed handles
- Easily mounts to wall or stands on bench or counter top
- External Dimension:- 15 x 6.5 x 18.5 Inches (W X D X H)
Features:
Specs:
Color | Grey |
Height | 18.5 inches |
Length | 6.5 inches |
Number of items | 1 |
Size | 39 Drawers |
Weight | 9 Pounds |
Width | 15 inches |
2. Stack-On DS-60-3 DS-60 60 Drawer Storage Cabinet
- 60-Drawer storage cabinet great for hobby supplies, workshop hardware, and more
- Wide Gray frame with supports for extra strength
- Medium-sized see-through drawers with tab stops to prevent spills and easy-pull ribbed handles
- Easily mounts to wall or stands on bench or counter top
- Measures 14-7/8 inches wide by 6-3/8 inches deep by 18-1/2 inches high
Features:
Specs:
Color | Grey |
Height | 18.5 Inches |
Length | 6.5 Inches |
Number of items | 1 |
Size | 60 Drawers |
Weight | 9 Pounds |
Width | 15 Inches |
3. Stanley 037025H 50 Gallon Mobile Chest,Black
- Large pull-out wide steel handle with soft grip for easy maneuverability
- Portable, deep tote tray
- Two 2-inch by 4-inch grooves on lid
- Heavy-duty wheels. Assembled Depth (in.)-34.25 in , Assembled Width (in.)-20.47 in, Assembled Height (in.)-18.9 in ,Handle Length (in.) -15in
- Enormous capacity
Features:
Specs:
Color | Black |
Height | 34.25 inches |
Length | 18.89999961853 inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 1 Pounds |
Width | 20.469999313354 inches |
4. Stack-On DS-22 22 Drawer Storage Cabinet
Ideal for storing supplies for arts, crafts, sewing, and moreContains 14 medium drawers and 8 large drawersDimensions: 19.5 x 6.5 x 9.75 Inches(W x D x H)Easily mounts to wall or stands on bench or counter topLarge, ribbed drawer pulls allow easy access to contents
Specs:
Color | Grey |
Height | 8 Inches |
Length | 21 Inches |
Number of items | 1 |
Size | 22 Drawers |
Weight | 7 Pounds |
Width | 11 Inches |
5. Eight Drawer Wood Tool Chest
- Precsion tool Box
Features:
Specs:
Color | Walnut |
Weight | 22.1 Pounds |
6. Excel TB2201X-Black 22-Inch Steel Chest Roller Cabinet Combination, Black
- Powder Coat Paint For Superior Scratch And Chemical Resistance
- Large Hinged Compartment Storage
- Four 3-In X 1-In Casters; 2 Fixed And 2 Swivel With Locks For Mobility And Convenience
- Four ball bearing slide drawers with aluminum drawer pulls
- Powder-coat paint finish or improved scratch and chemical resistance
- Caster wheels make for easy maneuverability around the work space
- Multiple drawers and trays for ample tool storage
- Sturdy steel construction
Features:
Specs:
Color | Black |
Height | 33.7 Inches |
Length | 22 Inches |
Number of items | 1 |
Size | 22-Inch |
Weight | 41 Pounds |
Width | 12 Inches |
7. Stack-On DS-27 27 Drawer Storage Cabinet
Ideal for storing supplies for arts, crafts, sewing, and moreContains 23 medium drawers and 4 large drawersDimensions: 12-5/8 inches by 13-3/8 inches by 6-3/8 inchesEasily mounts to wall or stands on bench or counter topLarge, ribbed drawer pulls allow easy access to contents
Specs:
Color | Grey |
Height | 14.38 Inches |
Length | 13.25 Inches |
Number of items | 1 |
Size | 27 Drawers |
Weight | 3.6 Pounds |
Width | 13.25 Inches |
8. Grizzly H7994 8 Drawer Storage Cabinet
- Each drawer measures 7-1/8-Inch W x 1-3/4-Inch H x 7-1/8-Inch D
- Oak veneer cabinet with 8 felt-lined drawers
- Perfect for storing and organizing precision tooling and other shop valuables
Features:
Specs:
Height | 10.3 Inches |
Length | 11.4 Inches |
Number of items | 1 |
Weight | 15.2 Pounds |
Width | 18.4 Inches |
9. Stanley 029025R 24 Gallon Mobile Chest
- Maximum security durable, nickel plated long lasting heavy duty latches with pad lock eyes
- Stanley - Black & Decker
- High Quality New!!!!!!!
- Unique tote tray sits comfortably on the steel handle Easy access to tools and accessories
- Wide 6/15.24 cm heavy duty wheels
- Maximum security durable, nickel plated long lasting heavy duty latches with pad lock eyes
- Suitable for large size power tools and accessories
- Featuring portable tray with 2 deep compartments with covers for smaller tools and accessories
- Unique tote tray sits comfortably on the steel handle ¿ Easy access to tools and accessories
- Wide 6/15.24 cm heavy duty wheels
Features:
Specs:
Color | Black |
Height | 19 Inches |
Length | 29.67 Inches |
Number of items | 1 |
Weight | 20.25 Pounds |
Width | 18.5 Inches |
10. Stack-On DS-18-3 DS-18 18 Drawer Storage Cabinet
18-drawer storage cabinet great for hobby supplies, workshop hardware, and moreWide gray frame with supports for extra strengthLarge-sized see-through drawers with no-spill tab stops and easy-pull ribbed handlesEasily mounts to wall or stands on bench or counter topExternal Dimensions: 15 x 6.5 x 18...
Specs:
Color | Grey |
Height | 18.5 Inches |
Length | 6.5 Inches |
Number of items | 1 |
Size | 18 Drawers |
Weight | 0.88 Pounds |
Width | 15 Inches |
11. Bosch i-Boxx53-12 Set 12 for use with Click and Go Storage System
- Thin drawer for L-BOXX-3D with 12-piece insert set
- 12-Piece Organizer Set: Easily sort and organize multiple accessories, bolts, screws, etc
- Transparent Lid: Easy to see contents of the drawer
- Integrated Handle: Comfortable to carry and transport
- Compatible with L-BOXX-3D
Features:
Specs:
Color | Blue |
Height | 1.75 Inches |
Length | 15 Inches |
Number of items | 1 |
Weight | 2.54 Pounds |
Width | 12.5 Inches |
12. Excel TB2105X-Blue 26-Inch Steel Top Chest, Blue
5 Ball Bearing Slide Drawers Support Up To 50 Lbs. For Storage Of Tools, Hardware Or Other ItemsPowder Coated Steel Body Is Scratch-Resistant For Added DurabilityRecessed Side Handles For Easy Movement Of The ChestFive ball bearing slide drawersLock with two keysRecessed side handlesFull length alum...
Specs:
Color | Blue |
Height | 12 Inches |
Length | 26 Inches |
Number of items | 1 |
Size | 26-Inch |
Weight | 51 Pounds |
Width | 16 Inches |
13. Numatic NRV 240-11 Dry Vacuum Cleaner, 9 Litre, 580 W, Red
- QUICK AND EASY: Peel, core and slice any apple variety. The key to the fastest apple pie or crisp!
- EASY TO ADJUST: Coring/slicing blade can be removed. Peeling blade can be adjusted for a thick or thin peel
- BUILT TO LAST: All blades are stainless steel. Heavy duty cast iron body.
- STRONG CLAMP BASE: Keeps the peeler securely in place on the edge of any table or countertop up to 2” thick
- 5 YEAR WARRANTY
Features:
Specs:
Height | 14.566929119 Inches |
Length | 14.173228332 Inches |
Weight | 19.731 Pounds |
Width | 13.385826758 Inches |
14. Keter New Masterloader Plastic Portable Rolling Organizer Tool Box Storage Solution
Compartmentalized binsCentral locking mechanism for securityTool divider inside for organizing toolsExtendable handle for ease when rollingThis unit features deep-tread tires made from rubber for gripping the surface underneathCentral Auto Locking MechanismIntegrated Organizer2 Removable Bins on Lid...
Specs:
Color | Red |
Height | 16.34 Inches |
Length | 24.25 Inches |
Number of items | 1 |
Size | 24 1/4 x 14 7/8 x 16 3/8 |
Weight | 15 Pounds |
Width | 14.88 Inches |
15. Craftsman M13417A1 Tool Chest Drawer Catch Genuine Original Equipment Manufacturer (OEM) Part Red
- This part is compatible with models including; 706654360,706654580,706654370,706654590,706654560,706654780,706654890,706654350,706654570,706654790,706654380,706654390,706652420,706654760,706654870,706654550,706654770,706654880,706654850,706652430,706654750,706654761,706654860
- This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; T16982A1
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman
- This drawer catch (part number M13417A1) is for tool chests
- Follow the instructions in your owner's manual or installation guide when installing this part
Features:
Specs:
Color | Red |
16. Gerstner International GI-T24 Red Oak 11-Drawer Top Chest
Hardwood design provides protection from moistureGreen felt-lined interior provides cushioningChrome plated hardwareFront lid stows under drawers in the open position
Specs:
Color | Red Oak |
Height | 15.74803148 Inches |
Length | 9.842519675 Inches |
Number of items | 1 |
Size | Medium |
Weight | 34 Pounds |
Width | 24.015748007 Inches |
17. Homak 35-Inch Professional Series 4-Drawer Slide-Top Service Cart, Black, BK06043500
- Slide-Top Service Cart: Heavy duty steel rolling cart with full-length push handle, 5-inch x 2-inch swivel casters and two locking wheel brakes offers easier mobility; Tubular locking system keeps tools secure; Unit has cutouts for power cords
- 4-Drawer Storage: Sliding top reveals lockable 6-3/8-inch deep storage compartment for access to larger tools; Includes two 11-1/4-inch wide drawers, one 24-3/4-inch wide x 2-1/4-inch high drawer and one 24-1/4-inch wide x 3-7/8-inch high drawer
- Solutions Provider: Homak emphasizes tool storage, utility convenience, and security; Each item is manufactured to exceed the customer's expectations and to provide them with high value, strength and dependability
- Full Product Line: Shop our hand-carry toolboxes, tool bags, parts organizers, tool storage cabinets, workbenches, garage furniture, safety cabinets, steel lockers, gun cabinets, fire-resistant safes, ammo storage boxes, accessories, and more
- Globally Known, Professionally Trusted: Founded in 1947, Homak produces a variety of storage solutions; From tool storage to gun security items, our products exceed customers’ expectations by offering high quality and innovative designs
Features:
Specs:
Color | Black |
Height | 42 Inches |
Length | 31.25 Inches |
Number of items | 1 |
Size | 4-Drawer Slide-Top Service Cart |
Weight | 1 Pounds |
Width | 20.75 Inches |
18. Craftsman 5 Drawer Homeowner Tool Center Chest Cabinet with Riser
Craftsman Homeowner Tool Center with Riser offers a 12,097 cubic inch capacityAll steel construction for strength and durability3 x 1 in. casters (two rigid, one swivel, one swivel with brake)Keyed external locking system secures stored itemsOverall dimensions: 26 1/2'W x 14'D x 54'H
19. Plastic Nuts Bolts Tools Parts Hardware Craft Storage Cabinet Drawer Organizer
Ideal for crafts, beads, hardware, fishing, and more, made in the USA12 virtually unbreakable 4-3/8-inch by 2-inch by 5-1/4-inch Large drawersAlso, 32 virtually unbreakable 2-1/8-inch by 1-1/2-inch by 5-1/4-inch Small drawersRugged, high-impact polystyrene framePlastic Nuts Bolts Tools Parts Hardwar...
20. Viper Tool Storage V218MCTL 18-Inch 2-Drawer 18G Steel Mini Storage Chest w/ Lid Compartment, Teal
- Drawers feature 50 lb load rated smooth ball bearing slides with hold-in detents, aluminum pulls, and matching non-slip drawer liners
- Powder coated finish stands up to dings, scratches and chemicals better than other finishes
- Internal locking bar and tubular cam lock system keeps all drawers and lid secure with the convenience of one key
- 2 steel pull handles with comfortable grips allow you to easily take this chest with you
- Smooth opening lid compartment offers extra storage space
Features:
Specs:
Color | Teal |
Height | 12.25 Inches |
Length | 11.63 Inches |
Number of items | 1 |
Size | 18" 2-Drawer |
Weight | 23.5 Pounds |
Width | 18 Inches |
🎓 Reddit experts on tool chests & cabinets
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where tool chests & cabinets are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Strap in, this got kind of long! I hope it's useful to someone.
I too have the "need a lot of bins and boxes and whatnot" situation because of my and my partner's hobbies. I sew and crochet and embroider and work with leather, and he works with electronics and 3d printers and so on. We share a small (10' x 10') room for our workspace and all of our most commonly accessed supplies.
Being someone who gets fixated on ideas frequently, I suggest that you open up your search to other options other than interlocking boxes. The reason I say this is that I am surrounded by bins and have been working with various sized bins to access things for a long time and I am tired of them. The problem is similar to what many other posters have mentioned: Getting items out of the boxes (even if they are small) is an Ordeal, especially if you have multiple boxes out, or if the box is very full and hard to put back together.
In general, a rule of thumb is to think about how you'll put your item away rather than how you'll access it. When we want access to something, it doesn't seem like a big deal to undo bins, bags, boxes, slide heavy things around, etc. because we get a reward at the end (yay, it's the thing! shiny!). After that, the idea of undoing all that stuff seems like a pain in the arse, and we just don't want to do it? (and what if we might need another thing from that bin? So, consider how you'll put it away, rather than how you'll get it out when designing a storage solution.
So, I am now moving away from the lidded box approach and encouraging my partner to do the same. Having watched Adam Savage's video describing first order retrievability, I am moving in that direction (although not yet to his ninjery level). Here's the video: https://www.youtube.com/watch?v=TWQAYfGxsPE.
I suggest the following types of storage for smaller objects. Bins still work OK for larger objects but someday I'd like to move away from that too.
My little keepers
Suppliers
Personal question
EDIT: Stuff
Have you looked at the bags currently available? That might give you some sense of how people generally organize their gear, and popular features/designs. I've been very impressed with the Noble Outfitters bags, and I know a number of people who have purchased new grooming totes just because the Noble Outfitters one is so practically designed (sturdy mesh bottom that allows all hair, sand, dirt etc to fall through. Grooming bags can get pretty nasty pretty fast.) I also think their high end line looks really good for the price. The Tally-Ho bags are a good example of more traditional storage bags, although most major retailers carry their own house brand (Dover Saddlery, Schneider's Tack, Smartpak would all be good ones to check out.)
You might also want to go to some shows in the discipline(s) you will be catering to, to get a look at what's currently being done. You can also get a sense of what the market will bear in terms of cost. There are a lot of expenses involved with owning a horse, and showing is pretty expensive in itself.
Horse people already have a whole set of highly specific gear to buy. Luxury type splurges in the horse world tend to have a very functional basis - expensive equipment sometimes does affect the rider and horse differently than the cheaper versions, so the cost is (sorta) perceived to be a functional thing, rather than purely a status thing. For example, expensive show helmets are a status symbol, but they're also generally lighter weight, with much better ventilation (so much less sweating), with all around better design.
It used to be a very high status symbol to have a nice, custom wooden tack trunk. And, in certain disciplines, in certain areas, I'm sure it still is. But people are mostly moving away from those lovely, expensive, furniture-like tack boxes because they're a pain in the neck to move anywhere. And barns are not really great places to keep lovely custom furniture - they're pretty rough environments.
The only people I know who still use the old tack trunks have had theirs for 20+ years. Most people use Stanley-type plastic trunks. And the smaller rolling tool chests, like this are fairly popular for traveling away from home.
Another issue that you're going to run into is that the people who have the money for this type of luxury item are pretty much guaranteed to be showing with their trainer and a professional groom. The trainer and the groom will have their own system for how they transport and organize equipment at the shows. So the horse related equipment is not really their domain. Rider gear bags are always pretty useful, of course.
There are Henrys and Georges and a few other types. Henry is a dry vacuum, George is able to dry and wet vacuum. I think the commercial model of Henry is sufficient for your vacuum needs but you should probably get a different head, the one which is specially made for carpets, I think that will be more successful in your war against the fur.
Commerical Henry: https://www.amazon.co.uk/NUMATIC-NRV200-11-Commercial-Vacuum-Black/dp/B00MUTUI0G/ref=sr_1_1?s=kitchen&ie=UTF8&qid=1519205492&sr=1-1&keywords=commercial+henry
You can add on the Red Airo Power HiPro Brush there too.
I also recommend those little red hoover deodorants that smell like melon and getting a reusable bag. Unlike the Dysons and Mieles (Miele is a good brand, but overrated) if you look at the reviews you'll see right the people who use these are professional cleaners - that's a clue right there.
There are a bunch of 'ratings' some entities give to hoovers, their power use, their 'suckability', you should ignore those - the rating systems are gamed, the Numatic is superior (average over a long period that is) but is never going to be at the top because the competition games those rating systems. It's just like how Toyota is a great reliable brand but somehow didn't pass emissions tests in Europe (because everybody else was cheating the rating systems).
I think Toyota and Numatic are in some way honest companies, or more honest than their competitors, and if you examine the second hand markets you'll notice right away that blue collar workers always bid up these models - that's another clue about quality.
I got mine here for $93: https://www.amazon.com/dp/B00Y3IR5M6/ref=cm_sw_r_cp_apa_pYJ5Bb4WWFBD6
Amazon and Harbor Freight have a slightly different one available for $80, but I prefered the design and size of mine over it...
Here is a link to the alternate model on Amazon: https://www.amazon.com/dp/B0069KALB8/ref=cm_sw_r_cp_apa_P0J5BbJF90BDM
Even though mine was slightly more expensive than the alternate model, to me it was worth it. Mine is more like a "jewelry box". The alternate model looks more like a "tool box". Mine is slightly less tall and has smooth round edges. The alternet is taller, chunkier and has sharper edges. One of the complaints that I read about the alternate model is.. Although it has two locks, one for the top and one for the front, they lock keys do not match... Mine does not have any locks. Rather, it has a very nice metal "clasp", which when twisted, holds everything closed. Overall, either of these boxes would be great for storing your gadgets and gear. Again, I simply prefered the design of the one I picked, over the alternate model.
Also, mine didn't come with a mirror (a real one would come with a mirror)... So, today, I added a mirror. I used a 3" concave x20 power mirror, a magnet, a washer, and some double-stick tape, so It's removable. All from Walmart for around $10.
The removable concave mirror is not intended to be used for vanity. Rather, it is to be used as a magnifying/inspection tool... When held properly, it can be used just like magnifying glass.
EDIT: I bought some houseplants today, to keep it company 😊
3/4" heatshrink to go over the ESC's. 0.25" I think to go over your battery cables. 5/8ths maybe to cover XT60 connectors. Wire sleeves aren't needed. I hold stuff down with double sided tape. or a wrap of electrical.
Thin solder, you'll thank me. Along with a pencil tip for your iron. You'll want ?14G? wire to solder a power lead, confirm this. I also didn't have a 5V step down to power my FC on my first build. You'll want one. Many PDB's have one integrated. That makes it easy.
Purple Loctite or your frame will vibrate itself apart, Real quick. Don't use this on Nylon, and don't get it on the motor shaft, but it is extra important to use on motor mounts though. Just be careful.
A battery buzzer that you can solder onto your PDB is nice. Adhesive velcro is good if you want to use that in addition to battery straps. Either that or hobby foam. A parallel charging board is nice to have so you don't lose an entire day charging batteries. Learn to use it.
I personally replace all my stock hardware with Aluminum Cap screws because I want to cut weight and I hate dealing with stripped hex heads. Not needed though. Zip ties are good to have. A bundle of black ones will work. I've found the colored ones are more prone to breaking. They are good to hold antenna wires.
90deg pin headers are nice. My FC didn't come with those, only straight, and stack height is a real problem with straight pins. Extra props. You'll want those. 8mm socket to remove prop nuts. 3mm allen key. USB to micro USB cable to update your FC. Some XT60 connectors.
Beyond that, I'm sure I'm over looking some things. After a couple of builds you just have extras of stuff so you overlook.
https://smile.amazon.com/gp/product/B000PS9S3M/ref=oh_aui_detailpage_o09_s02?ie=UTF8&psc=1
http://www.fastener-express.com/aluminum-fasteners-nuts-washers.aspx
https://smile.amazon.com/gp/product/B006GOL5CQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B0094EJG3K/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B00004Z4BV/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
That's beautiful! I have a very similar storage system, with a much less expensive piece of furniture. It's not easy to find something like that.
If OP wanted to go the cheap route, Harbor Freight sells a wooden tool box with green felt-lined drawers for ~$80 that would look okay and hold a lot of watches.
I'm pretty sure it's this same one:
http://www.amazon.com/Eight-Drawer-Wood-Tool-Chest/dp/B0069KALB8/
The one I saw in the store looked pretty nice - for the money.
I put this box together for my boyfriend for glamping and it has been amazing for both of us:
https://www.amazon.com/dp/B00PX0YTNQ/ref=cm_sw_r_sms_c_api_8b6fzb3XAAEBM
I put a flashlight, toilet paper, hand wipes, a lighter, plastic dishes, a pop up trash bin, etc. I wrapped everything individually so it was fun to open. You could do something similar with gardening gear or ski gear. (Hand warmers, first aid, mini liquor shooters, gloves) Something you throw in the car so you don't have to pack.
I love my camelback for hiking. Not very personal but nice to have if you don't already.
A GoPro is fun to have for skiing. You can get gear to attach it to your chest or helmet.
Not the same cabinet but I was shopping today and found this one onsale for $15:
http://www.amazon.com/gp/product/B000AMADQY/
Just bought one for my son. I've found that the full-width drawers like this one are really great for storing bricks, while the half-width drawers like in the OP's link work better for smaller plates or specialized shapes.
If you're going to be living out of a hotel room and moving around a lot, I would recommend buying one of These and packing it up. Practice living out of that box before you leave.
There's an art to travelling light. If you'd rather not join the Army to learn all the little tricks, the least you can do to prepare yourself is to do a "shakedown run" on all your gear. It takes a while to figure out what you really need and what's just nice to have.
There's three major things that you'll need to have in control before you go:
Good luck, you're in for an adventure.
That looks pretty close actually. It's a horrible picture (not trying to sound like I'm complaining), but it looks like the general geometry will work. The tab length won't matter in use.
I do have a hardware store fairly close that I'll check out. That's a great tip. I used to go to a place called Hardware Sales in Bellingham that was amazing! I'm in a different location now and still getting used to local businesses.
Edit: I found it (thanks, u/kes67ct) Here is a link on Amazon
I can't help with the 18" figures, but for smaller figures (figma/revoltech/figuarts) I've used these with great success. Tackle boxes can also work great, especially for loose accessories.
I can’t say I’m well researched on this topic. I’ve just seen them in passing in various places. Harbor freight comes to mind. I’d google “pelican case alternatives”.
I bought a couple pelican cases back in 2005ish and the foam used to be so much nicer. Also, look up using plastidip on the foam. Seems to really work well.
I personally use a wooden toolbox for my knife, flashlight, and edc storage. Here’s an example but I don’t know if it’s in stock regularly but there should be similar other ones. If this wooden box is of interest, I can look around and find you one in stock. Just hit me up.
Link: TRINITY TWM-3501 Wood Toolbox, Brown https://www.amazon.com/dp/B00Y3IR5M6/ref=cm_sw_r_cp_api_i_yuNFDbSHJVJRZ
Here’s the super option: Gerstner International GI-T24 Red Oak 11-Drawer Top Chest https://www.amazon.com/dp/B076H7WGWG/ref=cm_sw_r_cp_api_i_yvNFDbKWHTVW9
My experience with plastic totes from my move proved to me the larger surface area, the more likely it is to bow and bend, and since most plastic totes are not made to withstand the pressures of water, I was afraid the 10g one I had would bust. After 30 mins of driving and my passenger seat getting SOAKED since it was nearly impossible to seal, I just put everything in to buckets. MUCH easier.
Of course this works a lot better with smaller fish. I know you have some larger ones, and I'm not sure how well they would do in buckets, or how big a bucket you could find...
I will say, when moving our koi and larger catfish, we used 55g foot lockers. They're sold at walmart and were fairly cheap, but they're made to take a pounding. Some are made to carry ammunition, and those are the ones you want! (it's what we got). They held up great for a 6 hour drive, and I now have two 55g quarantine tanks. :)
It was basically something similar to this
Plastic bins are usually the best way to go, no small holes for the tiny pieces to get through.
http://www.amazon.com/Sterilite-16428012-Storage-See-Through-12-Pack/dp/B002BDTETW/ref=sr_1_10?ie=UTF8&qid=1324926801&sr=8-10
I realize you probably don't need a 12-pack, I'm just showing you what I'm on about.
If he's an avid builder, you might want to try sorting the pieces into drawers like this:
http://www.amazon.com/Stack--DS-39-Drawer-Storage-Cabinet/dp/B000HJBA1W/ref=sr_1_12?ie=UTF8&qid=1324926793&sr=8-12
Makes it much easier to find pieces than endlessly pawing through a bucket of all your bricks.
https://www.strictlytoolboxes.com/tool-vault-56-11-drawer-tool-cabinet.html
This is a nice entry level pro-grade box. Not sure how much shipping will be to UK, but probably still cheaper than buying Snapon.
There's a lot on this site, they are all professional grade. Also consider Homak, or maybe even a nice full drawer service cart that will be usefull for your entire career.
https://www.amazon.com/Sunex-8057-Premium-Drawer-Service/dp/B00D7ALLNK/ref=pd_sbs_469_4/136-6821094-5403867?_encoding=UTF8&pd_rd_i=B00D7ALLNK&pd_rd_r=3583803d-4da0-47a3-8308-8e06c662351a&pd_rd_w=1Vix6&pd_rd_wg=Wt2TW&pf_rd_p=52b7592c-2dc9-4ac6-84d4-4bda6360045e&pf_rd_r=CDSEX43EY8RTAMQM27RP&psc=1&refRID=CDSEX43EY8RTAMQM27RP
I'm a senior master mechanic, and I run a Homak service cart to this day, in addition to my toolbox. Wish I had just started with it and not had to pay twice.
I use this:
https://www.amazon.com/35-Inch-Professional-4-Drawer-Slide-Top-BK06043500/dp/B00BJ2CEJ8/ref=sr_1_2?keywords=homak+service+cart&qid=1572380849&s=hi&sr=1-2
All credit goes to Onyx Lego Storage. S/he took the time to make these labels, unfortunately they're in .CDR format (Corel Draw) and a lot of people might not have that software. Since they were free to download, I downloaded them and PDF'd them to make it easier for everyone else. If you're an organizational freak like me these will come in handy! They're sized very well to be used on drawers like this
I unfortunately have a super tiny bathroom so my stuff is relegated to a small basket on a shelf. However I would suggest going off the beaten path. Machinist tool chest are designed to hold delicate machining tools. They look wonderful and are super practical for something like a razor collection. Check them out.
https://www.amazon.com/Eight-Drawer-Wood-Tool-Chest/dp/B0069KALB8/ref=sr_1_3?ie=UTF8&qid=1469669869&sr=8-3&keywords=machinist+chest
I got a Stack-On 39 drawer cabinet (from Lowe's, I believe) that I really like. You can find them at lots of places:
http://www.amazon.com/gp/aw/d/B000HJBA1W/
They also make a cabinet that has 64 of only the small sized drawers, and one that has 18 of only the large sized ones. I'd probably prefer to have one of each of those rather than the combined one that I got, because I like to separate my 1000-piece variety packs of resistors or capacitors.
Additionally, you can find some vendors on ebay that sell 100-packs of small bags (often designated as for crafts or jewelry) very cheaply. I grabbed 100 2"x2" for about $2.50. I'd love some 3"x3", but they're not nearly as cheap, for some reason.
Either way, cut 3x5 index cards into eighths and use a pen to write what the component is ("0.1uF cap" or "3mm blue LED 2.2v 20mA"). You can put it in the bags or in the front of the drawers and it'll make stuff much easier to find. They'll also protect small wires/leads in your bags from getting bent so easily.
Maybe invest in small drawers like these?
http://www.amazon.com/Stack-On-DS-27-Drawer-Storage-Cabinet/dp/B000Z5HY40/ref=pd_sim_hi_5?ie=UTF8&refRID=0B3HAXS4M6MP319T6K4W
I'm using 4 at the moment with some larger totes for bigger pieces.
I also separate out any parts I know I will never or rarely use in MOCs. These are in small zip lock bags in another tote.
I guess it really all depends on how much you think your collection will grow. Do you need to leave room for expansion? Have another plan in place for new sets you won't disassemble or brake apart for parts?
Good luck!
On the filing cabinets they work great, how ever we use one of those rolling upright tool chests like this (tool cabinet)[http://www.amazon.com/Excel-TB2201X-Black-22-Inch-Cabinet-Combination/dp/B00466I97A/ref=pd_sim_sbs_hi_2?ie=UTF8&refRID=0W4E5A82VGPYKVR5KG79],
holds all out DIs, mics , mic clips, and ours has section with doors that we use for headsets and intercom. I recommend it over a file cabinet if you will need to move it around
Yeah I debated the cost before I picked it up, my rational was its the cost of 2 or three nice model kits. That is just a cheap chinese tool chest, i'm sure you could get a similar model in the US for ~$150. ebay and amazon would be my first stops.
edit: something like this?
https://www.amazon.com/Craftsman-Drawer-Homeowner-Center-Cabinet/dp/B00G1AWG9Q
The riser in the middle says spray booth to me.
I bought four of these a few years ago: Stack-On DS-39 39 Drawer Storage Cabinet. They're not the absolute highest quality, but they're not bad, and certainly get the job done better than the containers I'd been using before. Two of them are devoted to Technic pieces, one is mostly for minifig parts, and the fourth is for miscellaneous small bits.
I actually bought it from lowes in the toolbox department. It's meant for nails and screws and such, I found one that's pretty much exactly like mine besides the color on amazon. Hope this helps!
http://www.amazon.com/gp/aw/d/B000PS9S3M/ref=mw_dp_sim_ss6?pi=SL500_SY125
I use a soft wooden test tube stand for inked pens and keep them nib up. Sometimes I have flow issues, but like having them visible and protected. Uninked pens I keep in lined drawers in one of these or a pen case.
Is it this?
https://www.amazon.com/gp/product/B000KKUSYS/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
If you're not gonna move it around it nicely perfectly fits a 1000 pc bag in each slot.
Just a note - if you go to the Japanese dollar-fifty store, like the one in the SF Bay area (both in Japantown as well as in Daly City) you can get fantastic compartmentalization aides there.
The best thing to do with all bug-out bags is to sub-compartmentalize as much as possible. Toiletries, medicine, ammo, food, tools, documents, clothes, etc - all in their own sub-bags.
As much as possible get a different color sub for each class - and use the same colors throughout planning.
THis means that you always grab the blue bag for medic - the red bag for ammo, etc....
Things I always find missing from bugout planning:
The problem is that there is so much that one could need.
Get a plastic storage container WITH WHEELS - and keep these in your car.
PAINT the outside with colored stripes reflecting what is in them:
Have a system, whatever works for you. Have levels within each color, say, 5 levels, and have a mix in each bin: A level 1 bin, level 2, level 3 - it corresponds to the type of gear and the WEIGHT of the bin.
Level 0 is your BoB pack, carry a level 1, pull a level 2, drive a level 3, get to a level 4
Level 0 is you bag you have in your house. It is your primary pack - it needs a subset of the RGBYOB kits.
Level 1 bin may be a duffle,
Level 2 is a cart like I posted
Level 3 would be a small trailer.
Level 4 is your stocked BOL.
Then define further what needs to be in each level, the higher should replenish the smaller. So a level 1 should have the highest consumables in your 0, plus larger items etc..
EDIT: Some things I collect when visiting the doctor, whoel foods or Sephora/MAC Cosmetics:
Nitrite/rubber/latex gloves, small brushes, mascara applicators, etc...
I personally use one of these, but either work great! https://www.amazon.com/Plastic-Hardware-Storage-Cabinet-Organizer/dp/B01LHNF5QW
Looks legit to me, although I can't see the head profile to confirm if it's the low profile head, but everything else looks right. Here's a good link to help ID SSs.
There's a couple of options, like the Bosch ones:
https://www.amazon.com/dp/B00BD5G61S/ref=psdc_15709201_t1_B00BD5G622
https://www.amazon.com/Bosch-i-Boxx72-10-Click-Storage-System/dp/B00BD5G622
or Stanley:
https://www.amazon.com/Stanley-Fatmax-FMST14820-FatMax-Organizer/dp/B008J2IQ34/ref=sr_1_2?s=hi&ie=UTF8&qid=1501065568&sr=1-2&keywords=stanley+deep+cup
https://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF/ref=sr_1_3?ie=UTF8&qid=1501065696&sr=8-3&keywords=screw+box
The OP's example seems to be from B&Q (google's amazing some times)
http://www.diy.com/departments/20-compartment-tool-organiser/1345784_BQ.prd
If you have space for it, something like this is great for sorting and storing all your small parts.
I think something like this would be awesome, especially because it locks.
http://www.amazon.com/Viper-Tool-Storage-V218MCTL-2-Drawer/dp/B008CM2ZT2/ref=sr_1_2?s=automotive&ie=UTF8&qid=1419895307&sr=1-2&keywords=viper+box+teal
I use a hardware organizer for storing my samples and products. It's easy to access and I just sharpie the label onto a piece of masking tape. And the units stack together if you want to expand.
edit: I think you can even mount it on the wall
This one is 22" wide. Hope that helps.
You might want to look into a high efficiency 12v power supply for the computer. You're going to lose a lot of power in the DC-AC-DC conversion.
There are several power supplies designed for mobile based computers ie. Carputers. You should be able to find them on car audio forums.
Are you running the Buffalo router from its own AC adapter? or directly from the battery? I know all my Linksys and Netgear stuff is 12vdc so you could skip some conversion loss right there.
If the computer is a laptop most manufactures offer a 12v source power supply for running in an RV, again cutting down on the DC-AC-DC conversion losses. In this setup with a couple of tweaks I don't see a need to have AC power at all.
This is a great project, if you could drop the whole thing into a rolling container with everything inside watertight and the panel mounted on top. Add a small antenna mast and you would be set for field deployment.
Looks great so far!
Personally, I love this: Stack-On DS-60 60 Drawer Storage Cabinet https://www.amazon.com/dp/B000KKUSYS/ref=cm_sw_r_other_awd_Lk0IwbJFQ12HY for sorting small collections of pieces. Plus the drawers come out, so you could have authentic dumping action.
And I'd recommend being firm on sorting by piece, not color. It'll save so much time down the road.
For those asking, I believe the drawers are these.
If they are, I have a question for OP: How do you feel about the fact that there aren't individual lids or coverings for each drawer? I've bought a couple and I like them, but if I need to move the entire set I feel like everything can just dump out too easily.
I'm thinking... tool chest with wheels! Maybe you can look in craiglist to see if someone is selling theirs for cheap. :)
Not exact, but something like this.
I bought this this summer and I'm stoked to use it: https://smile.amazon.com/gp/product/B000PS9S3M/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
I think I saw a teacher use it on pinterest, they made labels for each drawer of basic stuff like paperclips, pencils, found coins, etc, to keep on their desk just so everything has a place. As someone who has terrible organization and tends to just put stuff down and immediately forget about it, this is great.
other things: small paper cutter (like 12"), label maker, good pens (I like Papermate Flair and Inkjoy gel pens), journal (I started a bullet journal for planning this year), posters/poster paper (giant post it easel pads are great), instrument or doorbell or something for attention getters...
Lemme go a step further mate :)
Stack-On DS-22 22 Drawer Storage Cabinet https://www.amazon.com/dp/B000PS9S3M/ref=cm_sw_r_cp_api_IYEYBb6MPT9K4
Better deal.
http://smile.amazon.com/Stack-On-DS-39-Drawer-Storage-Cabinet/dp/B000HJBA1W/
I use these when I can justify the expense, and these when I can't. Removable bins makes reorganizing way easier.
I use this. I drilled holes into the back of the drawers for the chargers and it's keeps everything nice and organized
Assuming it's an English saddle, it'll fit in one of these trunks. They have a lock and I think they're cheaper at home depot.
I use something like this - https://www.amazon.com/dp/B000KKUSYS/ref=cm_sw_r_awd_TK1Hub1B9KJAY
Mine is a smaller, with bigger drawers on the bottom.
I bought this rolling chest. It holds my 2 speakers, amp, chords, mics...easy to move around with the wheels, sometimes need a little help lifting into the back of my van.
I bought one of these tool boxes when it was on sale at a local hardware store. Favorites or most frequently worn items go in the top. The rest of my stuff is sorted. I keep silica packets in the drawers to reduce tarnishing.
Don't sort by color, that will cause madness. I have a combination of small parts bins and IKEA Helmer drawers.
Also if you plan on getting bulk lego get a sorter, the box4blox works worlds better than the lego brand one.
https://www.flickr.com/photos/24983112@N07/15636640999/in/dateposted-public/
http://www.ikea.com/us/en/catalog/products/40107872/
https://www.amazon.com/gp/product/B000KKUSYS/ref=s9_acsd_al_bw_c_x_3_r?th=1
https://www.amazon.com/BOX4BLOX-Rokenbok-Interlocking-Building-Organizer/dp/B004UJFUP2/ref=lp_3019571011_1_1?srs=3019571011&ie=UTF8&qid=1478748718&sr=8-1
Weekend warrior here, I use a Stanley work box. Available at Lowe's. Cheaper than a proper road case, lighter and has room for tools.
An older version of this one: https://www.amazon.com/Stanley-037025H-Gallon-Mobile-Chest/dp/B000Q5LZT4
But, I got it on sale for $20ish off. Bit more professional than a tote.
About this size? http://www.amazon.com/Stack-On-DS-60-Drawer-Storage-Cabinet/dp/B000KKUSYS
I might get one... or two...
I'm on my phone and don't reddit often, so I hope this works lol.
https://www.amazon.com/dp/B00PX0YTNQ/ref=cm_sw_r_sms_c_api_zS62AbXG692HC
I DIY'd a ghetto fabulous padded case out of one of those stash boxes that look like a book and some memory foam I got from my work. It ain't much, but it keeps 'em safe and dry and I can keep my collection in plain sight w/o my GF threatening to kill me. Ultimately this is what Im going to invest in, a legitimate man jewelry box.