Reddit mentions: The best automotive bumpers
We found 122 Reddit comments discussing the best automotive bumpers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 64 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. EAG Front Bumper Stubby with Fog Light Hole and Winch Plate for 07-18 Jeep Wrangler JK Offroad
- Stubby front bumper for a great approach angle and maximum tire clearance. Fitment: 2007-2018 Wrangler JK all models. Product Dimensions: L 48. 62" x W 10. 28" x H 17. 76".
- Manufactured from durable 5/32" steel sheet and 2 3/8" x . 120 wall steel tubing. Textured black powder coat finish for corrosion protection and durability.
- Winch location supports up to 12, 000 lbs. winch. OE size fog light housing. Two tabs on pre-runner hoop for extra lights. Winch tray accommodates both roller and Hawse fairlead styles
- The D-ring mounts are welded on both inside and outside for extra strength. Two 4. 75 ton capacity D-ring shackles are included.
- Utilizing the factory mounting locations we eliminate the need for drilling. Easy installation.
- Vehicle Specific fit
Features:
Specs:
Height | 11.81 Inches |
Length | 55.51 Inches |
Weight | 56 Pounds |
Width | 21.26 Inches |
Size | 55.51 x 21.26 x 11.81 inches |
Number of items | 1 |
2. Nilight Led Pods 2PCS 18W 1260LM Spot Led Off Road Lights Super Bright Driving Fog Light Boat Lights Driving Lights Led Work Light SUV Jeep Lamp,2 Years Warranty
Super bright spot beam: High-quality LED chips emits bright white light; Concentrated spot beam illuminates to further distance and lumen is 1260LMAdjustable mounting bracket: The pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier.Better heat dissipation: Sp...
Specs:
Color | Black |
Height | 3.49999999643 Inches |
Length | 4.599999995308 Inches |
Weight | 1 Pounds |
Width | 11.99999998776 Inches |
Size | 2PCS 18W Led Lights |
Number of items | 1 |
3. iJDMTOY Universal Fit Black Finish JDM Quick Release Fastener Kit For Car Bumper Trunk Fender Hatch Lid
- Universal fit for most cars (sedan/coupe/convertible)
- Come with (4) black color powder-coated anodized finish aluminum fasteners, (4) sets of stainless bolts/nuts/washers, (2) high strength fastener O-ring rubber bands
- Made with T6 6061 high quality solid billet aluminum
- Perfect for front or rear bumpers, hood, trunk or hatch lids, etc for a quickly, easily and frequently removal
Features:
Specs:
Color | Black |
Height | 0.5 Inches |
Length | 5.5 Inches |
Width | 4 Inches |
Number of items | 1 |
4. EAG Rear Bumper with Tire Carrier Linkage Offroad Fit for 07-18 Wrangler JK
- SINGLE HANDED OPERATION - Keep a spare tire handy during adventure trips with the EAG swing and lock tire carrier. It has a special factory latch mechanism and a reinforced spindle that lets you operate it with one hand.
- TIRE MOUNT - Two way adjustable tire mount for up to 37" tire for tire carrier.
- OFFROAD DESIGN - High strength D-Ring mounts and two D-ring shackles with black isolators are included. Class Ⅲ 2" receiver hitch rated 5,000 lbs equipped with safety chain loops.
- HEAVY DUTY CONSTRUCTION - Manufactured from durable 5/32" steel sheet. High quality textured powder coat for corrosion protection and durability.
- FITMENT - The EAG off-road rear bumper fits for 2007-2018 Wrangler JK all models.
Features:
Specs:
Height | 14.57 Inches |
Length | 72.83 Inches |
Weight | 145.06 Pounds |
Width | 15.35 Inches |
5. EAG Full Width Front Bumper with LED Lights and Winch Plate Fit for 07-18 Jeep Wrangler JK Rock Crawler
Specs:
Height | 19 Inches |
Length | 67 Inches |
Width | 13 Inches |
6. Smittybilt 76855 XRC Textured Black Rear Bumper with 2" Receiver Hitch and D-Ring Mounts
2 and 4-door modelsTwo stage matte Black powder coat finishMade from 3/16 cold rolled steel and then robotically welded to the exact specificationsFeatures a 2-inch Class III tow rated receiver hitch and two D-ring mounts (D-rings not included)Do not use any type of cleaners that contain abrasives t...
Specs:
Color | Textured Black |
Height | 20 Inches |
Length | 69 Inches |
Weight | 107 Pounds |
Width | 14 Inches |
Size | Normal |
Number of items | 1 |
7. VERSA 07-12 FRONT BUMPER BRACKET LH, Side
- VERSA 07-12 FRONT BUMPER BRACKET LH, Side, Plastic
Features:
Specs:
Height | 5.7 Inches |
Length | 7.8 Inches |
Width | 6.6 Inches |
8. VERSA 07-12 FRONT BUMPER BRACKET RH, Side
Specs:
Height | 6.9 Inches |
Length | 7.6 Inches |
Width | 6.4 Inches |
9. Hi-Lift Jack BL-250 Bumper Lift
- The rugged, capable Hi-Lift jack is designed for use with flat bumpers but the addition of this 3,000 pound capacity accessory increases its capabilty to include most metal bumper vehicles.
- Designed to fit most curved steel bumpers
- Heavy duty, all steel construction for long life and durability
- Lifting capacity of 3000 pounds
- Quick and easy to use
Features:
Specs:
Height | 36 Inches |
Length | 216 Inches |
Weight | 2 Pounds |
Width | 72 Inches |
Number of items | 1 |
10. Smittybilt 76721 SRC Gen1 Front Bumper for 1987-2006 Jeep Wranglers
- Heavy-duty bumpers are designed for off-road use and abuse.
- Sloping ends for greater tire travel and enhanced entry and exit points
- One-piece welded design, manufactured from 2" x .120 wall tube
- Solid mount D-rings – welded on the inside and out
- Wide front opening allows for winch installation (NOTE: requires Winch Plate #2803)
Features:
Specs:
Color | Black |
Height | 24 Inches |
Length | 69 Inches |
Weight | 73.9 Pounds |
Width | 15 Inches |
Size | Full Size |
Number of items | 1 |
11. U-Drive JK Front Bumper, Black Textured Rock Crawler Bumper with 4 Led Lights and Winch Plate for 2007-2018 Jeep Wrangler
【Fitment 】- 2007-2017 Jeep Wrangler JK【Surface Finished】- Textured Black Coated Finish,Professional installation is always recommended.【Installation Type】- Direct Bolt-On, No Drilling Required.【What You Get】- 1 set of front bumper + 4 LED Lights+ 1 set of crews + 2 D-ring mounts【Ma...
Specs:
Height | 14.17 Inches |
Length | 64.17 Inches |
Weight | 84 Pounds |
Width | 17.72 Inches |
12. VDP 31550 Stubby Bumper End Cap
Vertically Driven Products 31550 Stubby Bumper End Caps - 07-C Jeep JK Wrangler
Specs:
Height | 9 Inches |
Length | 18 Inches |
Weight | 4 Pounds |
Width | 9 Inches |
Number of items | 1 |
13. Warrior Products 3530 Front Winch Bumper
- The FJ Cruiser Front Bumper will fit most popular winches in the 8000-10,000 lbs. range that have removable solenoid packs
- Package Dimensions: 41.91 L x 170.18 H x 58.42 W (centimeters)
- Package Weight : 94 pounds
- Made in United States
Features:
Specs:
Height | 15.99999998368 Inches |
Length | 65.99999993268 Inches |
Weight | 94 Pounds |
Width | 21.99999997756 Inches |
Size | Large |
Number of items | 1 |
14. GTP Front Bumper Tow Hook License Plate Mounting Bracket Compatible with Lexus IS250 IS350 is-F RC200t RC250 RC300 RC350 RC-F GS350 GS460, CT200h, NX RX LS
Compatible with 06-18 IS250 IS350 IS-F, 06-08 GS350 GS460 GS450h, 15-18 RC200t RC300 RC350 RC-F, 12-18 RX, 11-17 CT200h, 07-17 LS8 mounting locations to ensure plate will not block intake vents / lights / sensors, come with angle adjustment and 2 size of spacers for plates to follow the curve of the...
Specs:
Color | Compatible with Lexus IS RC GS CT RX LS |
15. Omix-Ada 18280.09 Axle Bumper
- Left or Right
- OE style
- Direct fit
Features:
Specs:
Height | 2 Inches |
Length | 6 Inches |
Weight | 1 Pounds |
Width | 4 Inches |
Number of items | 1 |
16. RAMPAGE PRODUCTS 88510 Textured Black Front Recovery Bumper with Stinger for 2007-2018 Jeep Wrangler JK
- Includes Stinger which provides grille protection and helps prevent vehicle from going over on it's nose when descending a steep incline
- 3/16 inch steel plate design for strength with 4" light openings for a custom look (lights not included)
- Winch plate and 2 D-Rings included
- Easy no-drill installation with quick stud alignment. Attaches to factory bumper mounts
- Finished in a durable matte textured black powder coat which prevents the bumper from rust and corrosion
Features:
Specs:
Color | Black |
Height | 18.5 Inches |
Length | 74 Inches |
Weight | 123 Pounds |
Width | 20.5 Inches |
Release date | July 2018 |
Number of items | 1 |
17. KBD Body Kits Compatible with Nissan 350Z 2003-2008 N3-R Style 1 Piece Flexfit Polyurethane Front Bumper. Extremely Durable, Easy Installation, Guaranteed Fitment, Made in the USA!
INCREDIBLE DURABLITY - KBD Body Kits Flexfit Polyurethane parts are practically unbreakable, meaning cracks, dents and dings are a worry of the past.PRECISE FITMENT - Guaranteed fitment - Tabs and drilling indentations are included on every part! This product is compatbile with: Nissan 350Z 2003 200...
18. Full Width Front Bumper Compatible with 07-18 Jeep Wrangler JK and JK Unlimited Rock Crawler With Fog Lights Hole, Winch Plate Black Textured
【Maximum Protection】If you are not going with aftermarket flat fenders, the tree would be very easy to remove your flares. The full-width bumpers that not only protect the front of your car, but also protect your fender flares.【OEM Fog Lights Housing】The full-width bumpers with built-in Fog ...
Specs:
Color | Black |
Height | 12.4 Inches |
Length | 71.65 Inches |
Weight | 72 Pounds |
Width | 15.35 Inches |
Size | width 71.93" bumper |
Number of items | 1 |
19. Fab Fours CH05-Q1362-1 Elite Front Bumper 2 Stage Black Powder Coated w/Pre-Runner Grill Guard Incl. Light Cut-Outs Elite Front Bumper
- Package Dimension : 92 " L x 47 " W x 36 " H
- Country of Origin: UNITED STATES
- Model Number : CH05-Q1362-1
- Item Package Weight : 300 pounds
Features:
Specs:
Height | 36 Inches |
Length | 92 Inches |
Weight | 300 Pounds |
Width | 47 Inches |
20. Fab Fours CH99-U1250-1 Elite Rear Bumper 2 Stage Black Powder Coated Elite Rear Bumper
- Fab Fours CH99-U1250-1 Elite Rear Bumper
Features:
Specs:
Color | Black |
Height | 14 Inches |
Length | 89 Inches |
Weight | 175 Pounds |
Width | 30 Inches |
🎓 Reddit experts on automotive bumpers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive bumpers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Anytime man. I’d love to help. Soft tops are pretty easy to install. What kind did ya go with?
I also saw you were shopping for bumpers. I went with these, they weren’t to pricey and I was very impressed with the quality.
These fender flairs were also an awesome purchase, super cheap and awesome quality for the money.
Black Textured Front Bumper-15 With 4 LED Lights Rock Crawler W/winch Plate For 2007-2018 Jeep Wrangler JK https://www.amazon.com/dp/B072R2XQBS/ref=cm_sw_r_cp_apip_dGU8dvqitZQ2D
EAG 07-18 Jeep Wrangler JK LED Accent... https://www.amazon.com/dp/B07BKV6TJN?ref=yo_pop_ma_swf
U-Drive Auto Textured Steel Flat Style Fender Flares For 2007-2018 Jeep Wrangler JK Unlimited (Drilling Required) https://www.amazon.com/dp/B06Y1TRX81/ref=cm_sw_r_cp_apip_uPfTsqGdu8svx
Hey guys, this is my new 2013 jeep wrangler sport. Not sure what I am going to name him just yet. I got an awesome deal on it. It already came with so much stuff on it. This is my first jeep wrangler so not sure if the name for some of the parts will be correct.
2.5 in lift sitting on 35’s
Winch
Snorkel
Front bumper
Upgraded sub and amp
Back jack
Running boards
Here is a list of mods I want to put on in the near future:
-Smittybilt xrc textured fenders
https://www.amazon.com/gp/product/B003EOZH9S/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1
-Smitybilt xrc rear bumper (will my spare tire fit on this it’s a 35??)
https://www.amazon.com/Smittybilt-76855-Textured-Bumper-Receiver/dp/B003EOTTUG/ref=sr_1_2?s=automotive&ie=UTF8&qid=1543072620&sr=1-2&keywords=smittybilt+rear+bumper&refinements=p_89%3ASmittybilt
-Better headlights
-headlights and taillight guards
-winch cover (the one it came with is super faded)
-black grille inserts
-black hood clasps
All this is running me under 800 dollars
If anyone has any better recommendations for any of the parts listed that would be a huge help! Thanks everyone.
I've picked up allot of parts on amazon for cheap. The nice thing about amazon, is if you set your car model/type/year it tells you if the part is compatible or not.
You can for instance go to side mirrors, click filter, and get results. Lots of people sport them without even bother painting them.
To install a replacement bumper your going to have to take the tire wells liners out. I really recommend, getting replacement support pins. Because your going to break some, some won't snap back in right. extra.
https://www.amazon.com/dp/B00BEB4EEC
You could use a screw driver to pop the support pints out. But it's allot easier, and faster if you get a Clip Plier & Fastener Remover
If the bumper is already loose on the left or right side. You'll probable need new left & right bumper clips.
https://www.amazon.com/dp/B00C7XWAF6
https://www.amazon.com/dp/B00C7XVUOI
Sense your taking out the tire well liners, you might just want to replace them. They're like 26 bucks for both.
https://www.amazon.com/dp/B009DJT67W
If you check under the bumper, you'll probable find the flaps on the tire well liners have ripped off the bumper. (this happens because people scrape underside of the bumper while parking)
Thanks. I like it a lot came ot good. Super flexible.
Got on Amazon.
Nissan 350Z 2003-2008 N3-R Style 1 Piece Polyurethane Front Bumper manufactured by KBD Body Kits. Extremely Durable, Easy Installation, Guaranteed Fitment and Made in the USA! https://www.amazon.com/dp/B078T1NLPQ/ref=cm_sw_r_cp_apa_i_9JCTDbSZCY7TR
Hi-Lift jacks are really designed for agricultural applications, like jacking up a wheel tractor by the axle, but they work great for off-road vehicle stuff. However, the jack does not mate with typical "civilian" bumpers well. 4 Wheel Drive Parts, Summit Racing, Amazon and others sell an adapter that fits on a Hi-Lift and allows you to jack up a vehicle with a conventional curved steel bumper. It's called a BL-250 bumper lift.
http://www.amazon.com/Hi-Lift-Jack-BL-250-Bumper-Lift/dp/B00042JSNY/ref=sr_1_10?ie=UTF8&qid=1464636486&sr=8-10&keywords=high+lift+jack+accessories
And the Hi-Lift jack, itself.
http://www.amazon.com/Hi-Lift-Jack-XT485-48-X-TREME/dp/B0017T7WHW/ref=pd_sim_263_5?ie=UTF8&dpID=31uiCiEJb%2BL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0R8PKSGH1MMK7F92NCXS
Over the years, I have found three used Hi-Lift jacks at garage sales, etc. usually for very reasonable prices--$30-$40. They are extremely tough, and can be re-built easily. I would never trust a vehicle sitting on a jack, not a Hi-Lift or any other jack. The vehicle must be sitting on JACK STANDS to be safe. Never go under any vehicle sitting on a jack without jack stands.
http://www.amazon.com/Torin-T41202-Jack-Stands-pair/dp/B0002H335A/ref=sr_1_1?s=automotive&ie=UTF8&qid=1464637124&sr=1-1
GPC Image 10 Pack Compatible Ink... https://www.amazon.com/dp/B00SKGHL6W?ref=yo_pop_ma_swf
Sorry for the late reply, it’s a great bumper and really cheap. Came in perfect condition, all hardware was there, paint looked good. Took about an hour to take the stock off, 20-30 min to put the new one on
I got these from amazon. (YITAMOTOR Steel Fender Flares Kit for 2007-2018 Jeep Wrangler JK (2/4 Doors), Heavy-duty Solid Steel Off-Road Fenders for Jeep Unlimited JK Front Rear Flat (4pcs) https://www.amazon.com/dp/B0739MNW4H/ref=cm_sw_r_cp_api_i_dofNDbYZWH6PB ) They we’re inexpensive and easy to install. However, I’m not sure they’ll pass inspection. If not, I’ll get these. (https://trailmods.com )
I also had to cut the ends off the front bumper. So, I installed these ( VDP 31550 Stubby Bumper End Cap https://www.amazon.com/dp/B0095GK9SI/ref=cm_sw_r_cp_api_i_7jfNDbGERJWDM ) on the ends. It looks like a stubby version of the stock bumper. It’ll do until I’ll can get a proper metal bumper with a winch.
I love my Warrior Products Bumper. It was about $1000. Made in the USA, and I have had no problems with this bumper. It winches well, looks great, and protects my headlights in the forests.
https://smile.amazon.com/Warrior-Products-3530-Front-Bumper/dp/B009FPDGNY/ref=sr_1_1?keywords=warrior+products+bumper+fj+cruiser&qid=1565361457&s=gateway&sr=8-1
https://www.youtube.com/watch?v=aa-_RjcF-VU
​
No drilling, no holes required. This guy does all kind of mods for his 3IS with step by step tutorials if youre interested
​
https://www.amazon.com/GTP-Bumper-License-Mounting-Bracket/dp/B07C22NJBR/ref=sr_1_2_sspa?crid=2OC4G7Z0JNYZJ&keywords=tow+hook+license+plate+mount&qid=1558984961&s=gateway&sprefix=tow+hook+%2Caps%2C203&sr=8-2-spons&psc=1
​
This is what i have on mine, very easy install. Some people dont like how it looks off centered but i think it looks great
Can you find out the type of bulb it is.You are going to have to do some researching. Why not post a picture of the bulb or does it have markings? There should be a model number on the bulb. Once you have a model number check ebay and select USA only. You might have some luck. I am curious myself. I couldn't find anything after searching.
For the type being why not wire up a cheap handle bar clamp dual sport light or something like that. This one is prime so you can get it in a few days and get back on the road. Even a cheap replacement headlight would work.
https://www.amazon.com/Nilight-Driving-Mounting-Bracket-Warranty/dp/B00G620ZVU/ref=sr_1_7?s=automotive&ie=UTF8&qid=1466042201&sr=1-7&keywords=led+mount
Pretty happy with this I am:
https://www.amazon.com/gp/product/B01N03YWRP/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
Here's my XJ on 32x11.5s with approx 4 inches of lift, which you'll be close to on 31s:
http://imgur.com/a/QjTes#5
I added bushwacker flat flares, which required trimming, in order to really clear them. This jeep is for offroading mostly, so i wanted up travel, and trimmed without adding too much more bump. If up and down travel isn't as big a deal, then you'd probably be OK with basic daystar bumps: http://www.quadratec.com/products/76058_74X_PG.htm
and these guys in the rear: http://www.amazon.com/gp/product/B000FQ7TMG/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Quick math: Measure top of tire to bottom of flare, subtract that from where the bump stops should be to top of the spring perch. That's about how much bump you need (plus a little for compression).
I have the Rampage front bumper which is only $590 on Amazon: http://smile.amazon.com/gp/product/B002HMOJL0/ref=wms_ohs_product?ie=UTF8&psc=1
It's simply awesome. So easy to install I did it by myself. It does help to have an air ratchet or a lot of wobble extensions to get to some of the bolts, but not totally necessary. It looks and works so great that two of my friends with Jeeps have now bought them too.
For my winch I have a Tuff Stuff 12.5k. It was only $315 including a wireless remote and cabling! I've had five recoveries with it now, and two were real bastards. One required two other JKUs to winch against, but the winch took the abuse. I would never buy a name brand winch again, this thing rocks.
My rear bumper is an OR Fab that I got for a deal on Craig's list. It's fine, nothing special, nothing bad. I neither recommend it or say don't get it, just whatever. The front bumper and the winch though, I very highly recommend.
EDIT: Forgot to post a picture link: http://i.imgur.com/zg03nS9.jpg
Most of what you'd see in that price range is no-name Chinese steel bumpers such as EAutoGrills(EAG), Restyling Factory, etc. There's a ton of them on Amazon or Ebay. I have no particular complaints about them; the welds aren't the cleanest but they're typically as beefy as you'd want and hit the functionality for value mark.
You mentioned no preference on style, but I think you should make the decision to either protect the fenders or leave the open wheel look. Narrow it down from there.
Note that a steel bumper will add 55-80 pounds forward of your wheels, and a steel cable winch another 80 pounds. All that weight will definitely cause the front end to sag. A couple of pucks from a leveling kit helps, but the real fix for that is upgraded springs. Keep those in mind if you're thinking about the total price of a steel bumper and winch.
Pretty sure that is the eautogrilles bumper on amazon.
https://www.amazon.com/gp/product/B00IS93TI0/ref=s9_dcacsd_bhz_bw_c_x_3
Front:
Fab Fours CH05-Q1362-1 Elite... https://www.amazon.com/dp/B009FQZJHY?ref=ppx_pop_mob_ap_share
Rear:
Fab Fours CH99-U1250-1 Elite Rear... https://www.amazon.com/dp/B009FQYYO8?ref=ppx_pop_mob_ap_share
Edit: it’s LOOOONG. Has alotta room for a big front winch. Plan to add a warn in the future, just saving up for it.
I did something similar to this with the reverse lights on my truck. I just took shipping tape and sanded it with 550 grit. Then I put the sanded tape on and trimmed it to fit with an Xacto knife. It worked pretty good until the lights shitted out
Something like this. Buddy of mine just went to home depot, bought some bolts and washers and used his girlfriend's hair bands to make his. turned out surprisingly well
It's a cheapie from Amazon, seems pretty sturdy tough and looks cool. Also the fog lights came out of the old bumper, they just bolt right into the back of this one.
https://www.amazon.com/gp/product/B00SKGHL6W/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
I have no direct suggestions, just maybe consider getting a rear bumper with a tire carrier on it, something like this (I'm not suggesting this one exactly, just the idea)
EAG Rear Bumper W/Tire Carrier Linkage Steel Black Textured Fit for 07-18 Jeep Wrangler JK https://www.amazon.com/dp/B01N03YWRP/ref=cm_sw_r_cp_apa_i_fKxGDbR35A95G
Yeah, then I still need to make brackets mounting off something solid to screw into. Thats the hold up there.
Friend has offered me a set of these, from Sparco, that he had sitting around from his drift car... not sure yet.. http://www.amazon.com/iJDMTOY-Release-Fasteners-For-Car/dp/B00JJYPATO/ref=sr_1_fkmr1_1?s=automotive&ie=UTF8&qid=1404933893&sr=1-1-fkmr1&keywords=Sparco+quick+release+fasteners
EAG 07-17 Jeep Wrangler JK Stubby Front Bumper with OE Fog Light Housing (51-0357)
https://www.amazon.com/dp/B00SKGHL6W/ref=cm_sw_r_cp_api_.tKBzb85YDJDP
That's it! And as far as winching goes I think I am going to place a 1/8" steel plate underneath the winch mount to make it a bit more stout.
Free shipping!
http://www.amazon.com/Smittybilt-76721-SRC-Front-Bumper/dp/B000JKQDQ6
Buy yourself a bunch of these to throw on around the rack.
I've got em on my light bar and they're pretty bitching.
Looks pretty darn close to my E-Autogrilles 51-0357.
Amazon Examples-
Pods: http://www.amazon.com/Off-road-Headlight-Driving-Mounting-Bracket/dp/B00G620ZVU/ref=sr_1_3?s=automotive&ie=UTF8&qid=1412741662&sr=1-3&keywords=led+light+bar
Bar: http://www.amazon.com/MicTuningTM-brand-Working-Driving-4500Lm/dp/B009C044N8/ref=sr_1_9?s=automotive&ie=UTF8&qid=1412741726&sr=1-9&keywords=led+light+13%27%27
There are less expensive versions of this bar and even larger bars as well.
Maybe something like these?
EAG Jeep JK LED Accent Light Front Bumper W/D-Ring & Bulit-in Winch Mount Plate https://www.amazon.com/dp/B00IS93TI0?ref=yo_pop_ma_swf
Smittybilt 76721 SRC Front Bumper https://www.amazon.com/dp/B000JKQDQ6/ref=cm_sw_r_cp_apap_sirQCGrpGRmMN
It's for a jeep wrangler I had to retro fit it to the car, and then we added then the winch plate also had to be added
First of all RGB LEDs are three colors that you can mix to produce most colors. If you just want white light you don't want RGB LEDS.
I bought one of these as a headlight but other come in just about any size you need. http://www.amazon.com/gp/aw/d/B00G620ZVU
http://www.amazon.com/gp/aw/d/B00G620ZVU/ref=sr_ph_1?qid=1462412850&sr=sr-1&pi=AC_SX236_SY340_QL65&keywords=fog+lights
Nilight 2PCS 18W 1260lm Spot Driving Fog Light Off Road Led Lights Bar Mounting Bracket for SUV Boat 4" Jeep Lamp,2 years Warranty https://www.amazon.com/dp/B00G620ZVU/ref=cm_sw_r_cp_apap_5CZeGe4oqjpAW
http://www.amazon.com/gp/aw/d/B00G620ZVU/ref=mp_s_a_1_2?qid=1421734303&sr=8-2&dpPl=1&dpID=51SHgpCt7dL&ref=plSrch&pi=AC_SY200_QL40
Here ya go bud -
http://www.amazon.com/gp/aw/d/B00G620ZVU/ref=mp_s_a_1_7?qid=1418492284&sr=8-7&pi=AC_SX110_SY165_QL70
http://www.amazon.com/Smittybilt-76721-SRC-Front-Bumper/dp/B000JKQDQ6
It's the SRC.
iJDMTOY Black Finish JDM Quick Release Fasteners For Car Bumpers Trunk Fender Hatch Lids Kit
http://www.amazon.com/gp/aw/d/B00JJYPATO?cache=75bf4b776aa1e0d2519d0700598a818e&pi=SY200_QL40&qid=1414853062&sr=8-1#ref=mp_s_a_1_1
http://www.amazon.com/Nilight-Driving-Mounting-Bracket-Warranty/dp/B00G620ZVU?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s01
Nilight 2 X 18W 1260 lm Cree LED Spot Driving Fog Light LED Work Light Bar Mounting Bracket for SUV Boat 4 x 4 Jeep Lamp, 2 years Warranty https://www.amazon.com/dp/B00G620ZVU/ref=cm_sw_r_other_awd_v4BkxbPA8DSJ3
Quick release for maximum JDM Street cred?
http://www.amazon.com/iJDMTOY-Finish-Release-Fasteners-Bumpers/dp/B00JJYPATO
bumper quick releases
example product:
http://www.amazon.com/iJDMTOY-Finish-Release-Fasteners-Bumpers/dp/B00JJYPATO
What if it is not? It could be a spotlight and look almost the same.
https://www.amazon.com/Autogrilles-Wrangler-Stubby-Housing-51-0357/dp/B00SKGHL6W
This one?
Not sure how to post a pic for you (currently at work and on mobile) but the lights are these: https://www.amazon.com/Nilight-Driving-Mounting-Bracket-Warranty/dp/B00G620ZVU
Cammer here: here's a pic of the mount I used.
http://imgur.com/gE4tfiI
I used these mirror mounts from amazon and the hardware from the local hardware store.
https://www.amazon.com/gp/product/B00AA7OFLI/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Here are the lights, not street legal probably. I usually only use them on back roads at night when there are no cars in front of me.
https://www.amazon.com/Nilight-Driving-Mounting-Bracket-Warranty/dp/B00G620ZVU/ref=sr_1_4?s=automotive&ie=UTF8&qid=1495114704&sr=1-4&keywords=led+fog+lights