Reddit mentions: The best bumpers & bumper accessories
We found 86 Reddit comments discussing the best bumpers & bumper accessories. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 54 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. EJ's SUPER CAR Rear Bumper Protector Guard Universal Black Rubber Scratch,Resistant Trunk Door Entry Guards Accessory Trim Cover for SUV/Cars,Easy D.I.Y. Installation(35.8Inch)
- ➤This Rear Bumper Protector is made of high quality silicone polymer material, heat/cold hold, abrasion to hold, anti - aging, waterproof & UV to hold. The Hardness (Shore A) 60, Of course, he has had very long conversations, and he has had High Elongation.Universal fit for most of the trucks, pickups or suvs.
- ➤The Rear Bumper Guard effectively protect car Rear Bumper when loading or unloading luggages, groceries, tools box and so on, Absorbing nasty scratches and provides protection. It can Also be used to cover any existing scratches, paint damage to make It new and beautiful.
- ➤ANTI - SLIP, the DESIGN of this Rubber Guards, groove DESIGN and non - SLIP function, Can effectively prevent the falling of things that you put.It also gives a unique appearance to the rear bumper protector.
- ➤Length * width: 90 * 7.5 cm / 35.8 * 3 inch; Color: black; Package with 3 m glue and adhesion promoter. The Scratch - Resistant Rubber Bumper Guard is very durable, flexible, and bendable (will not crack or break), glue tape is "coming under The trim, Just stick on sill, easy to install.
- ➤Easy installation, you just need to rub white adhesion promoter paste, back glue stick on the product, on the installation position can be installed off. If you have any questions, please feel free to contact us.
Features:
Specs:
Color | Black |
Size | 35.8 inch |
2. Dawn Enterprises RBP-016 Rear Bumper Protector Compatible with Honda CR-V
Added protection against scuffs, nicks, scratches, and other damaging marksTextured surface provides slip resistanceQuick and easy no-drill installation with the use of self-adhering 3M TapeAttaches directly to your rear bumperTo ease concerns about fitment, use the size variations above to see imag...
Specs:
Color | Black |
Height | 0.38 Inches |
Length | 46.5 Inches |
Width | 3.5 Inches |
Size | Honda CR-V Fitment Images (2017-2022) |
3. CarPartsDepot, CAPA Certified Rear Bumper Cover Primed USA Built Without Spoiler, 352-44787-20-CA TO1100243 5215906950
- ➤This Rear Bumper Protector is made of high quality silicone polymer material, heat/cold hold, abrasion to hold, anti - aging, waterproof & UV to hold. The Hardness (Shore A) 60, Of course, he has had very long conversations, and he has had High Elongation.Universal fit for most of the trucks, pickups or suvs.
- ➤The Rear Bumper Guard effectively protect car Rear Bumper when loading or unloading luggages, groceries, tools box and so on, Absorbing nasty scratches and provides protection. It can Also be used to cover any existing scratches, paint damage to make It new and beautiful.
- ➤ANTI - SLIP, the DESIGN of this Rubber Guards, groove DESIGN and non - SLIP function, Can effectively prevent the falling of things that you put.It also gives a unique appearance to the rear bumper protector.
- ➤Length * width: 90 * 7.5 cm / 35.8 * 3 inch; Color: black; Package with 3 m glue and adhesion promoter. The Scratch - Resistant Rubber Bumper Guard is very durable, flexible, and bendable (will not crack or break), glue tape is "coming under The trim, Just stick on sill, easy to install.
- ➤Easy installation, you just need to rub white adhesion promoter paste, back glue stick on the product, on the installation position can be installed off. If you have any questions, please feel free to contact us.
Features:
Specs:
Height | 17 Inches |
Length | 68 Inches |
Weight | 149.97 Pounds |
Width | 24 Inches |
4. PARKING ARMOR 4.2 - (42" Wide x 12" Tall) Indoor/ Outdoor Ultimate Rear Bumper Protector, Steel Reinforced Straps, Widest Bumper Protection, Thickest Bumper Guard, STEEL REINFORCED STRAPS PREVENT THEFT !
- 42" x 12" Bumper Protection Area *** WEATHER RESISTANT RUBBER MATERIAL ***
- Waterproof Steel Reinforced Straps - SRS Straps (Helps Deter Theft)
- 2" EXTRA Thick Hi-Density Foam Core - ULTRA BRITE Silver Safety Strip
- Soft Anti-Skid Foam Pads Behind Trunk Straps (Soft On Paint Finish)
- “Flex-Body” Structure - Allows Parking Armor To Flex Around the Contours of Your Bumper
Features:
Specs:
Height | 12 Inches |
Length | 42 Inches |
Width | 2 Inches |
5. TOYOTA Rear Bumper Protector for 2010-2015 Prius
- Rear Bumper Protector for 2010-2015 Toyota Prius
- Made of hard rubber
- Not compatible with Plug-in Models*
Features:
Specs:
Height | 1 Inches |
Length | 32 Inches |
Width | 4 Inches |
6. BMW Genuine Front Bumper Trim Panel Cover Guide RIGHT for 3 Series E46 for 325Ci 330Ci
- BMW Genuine Bumper Cover Guide RIGHT/Passenger side Front.
- Manufacturer Warranty: 12 months / 12000 miles
- Please see Product Description below for compatible models.
Features:
Specs:
Weight | 0.1875 Pounds |
7. OE Replacement Honda Civic Front Bumper Cover (Partslink Number HO1000197)
- Country Of Origin: China
- Model Number: HO1000197V
- Item Package Dimension: 72.0" L x 26.0" W x 19.0" H
- Item Package Weight: 8.0 lb
Features:
Specs:
Color | Black |
Height | 19 Inches |
Length | 71 Inches |
Width | 18 Inches |
8. TAC 3" Bull Bar Fit 2005-2020 Nissan Frontier / 2005-2015 Nissan Xterra / 2005-2007 Nissan Pathfinder Black Front Bumper Grille Guard Brush Guard (Tow Hooks Must be Removed)
FITS PERFECTLY - Fit 2005-2020 Nissan Frontier / 2005-2015 Nissan Xterra / 2005-2007 Nissan Pathfinder (Tow hooks must be removed) (Please contact us to confirm fitment before ordering.)OUTSTANDING DESIGN - TAC bull bar creates a tough, heavy-duty appearance on the front end of your car while also p...
Specs:
Color | Gloss |
Height | 21 Inches |
Length | 41 Inches |
Width | 18 Inches |
Size | 3" Gloss Black |
9. Front Bumper Cover Compatible With 1996-2003 BMW E39 | 5 Series 525i 530i 540i M5 PP Front Bumper Conversion Guard Without Lamp by IKON MOTORSPORTS | 1997 1998 1999 2000 2001 2002
97-03 BMW E39 5 Series Sedan and WagonProfessional Installation is highly recommended.High quality Polypropylene(PP) unpainted blackUnpainted
10. Genuine Subaru XV Crosstrek Rear Bumper Cover
Helps protect the upper surface of the painted bumper from scratches and dingsWe have customers using these on 2012+ Impreza 5 door models, so far so good!Please contact Mastria Parts with any questions
11. AutofitPro Custom Rubber Rear Bumper Protector Guard for Mazda CX-5 CX5 2013 2014 2015 2016 2017 2018 2019
Provides protection agains marks, scratches, nicks, and scuffsCustom fit design for maximum coverageSimple installation with 3M tapes, no drilling/modification is requiredUnique pattern for style and slip resistanceUltra thin profile ensure the bumper guard does not hinder trunk release
12. BumpShox (New for 2020) XXL - Front Car Bumper Protection, Ultimate Front Bumper Guard. Front Bumper Protection License Plate Frame. Tougher Than Steel !
At 15" SUPER WIDE x 10" HEIGHT X 2.5" THICK - BumpShox XXL is Designed To Be Taller and Wider Than a Standard License Plate FrameTOUGHER THAN STEEL – V-Tech All Weather Foam ** Will NOT Crack or Rust Like Metal or Plastic License Plate Frames **RECESSED SCREW DESIGN - No Protruding Metal Parts Tha...
13. 2006-2010 Dodge Charger Police Bumper Grille Guard/Protector in Black Powdercoat
- Protect Your Vehicle Front Bumper
- Bolt On Installation
- Coated in Black Powdercoat
- All Mounting Brackets, Bolts, and Nuts included
- Fits 2006-2010 Dodge Charger
Features:
14. CarPartsDepot, Front Bumper Cover Primed Plastic Unpainted, 352-18579-10-PM FO1000533 2R3Z17D957BA
- 100% Brand New & High Quality,Third party product.
- This memory card is fully compatible for Wii games and save options.
- Can independent save different kind of games.
- Has a large storage capacity of 512MB.
Features:
Specs:
Height | 17 Inches |
Length | 68 Inches |
Weight | 162.46 Pounds |
Width | 26 Inches |
15. Tyger Auto TG-GD6F60378 Front Bumper Guard Compatible with 1998-2012 Ford Ranger/Ranger Edge (Excl. STX) | Textured Black | Light Mount | Bull Bar
US design patented TYGER Guard ! The kit includes one bumper guard and all mounting hardware and DIY installation manual. | FITMENT - Compatible with 1998-12 Ford Ranger/ Ranger Edge (Excl. STX)Made of heavy-duty 2.5inch tubing frame with durable E-coating textured black finish for rust resistance a...
Specs:
Color | Textured Black |
Weight | 28.64 Pounds |
16. JDMBESTBOY Gunmetal Gray Quick Release Fasteners for Car Bumpers Trunk Fender Hatch Lids Kit from
- Powder-coated anodized finish
- Made with 6061 T6-grade high quality solid billet aluminum
- Perfect for front bumpers, rear bumpers, trunk/hatch lids, etc
- For off-road use only
- Allow quickly, easily and frequently removal
Features:
17. Auto Ventshade 34006 Rear Bumper Protector, OE Style for 2004-2009 Toyota Prius
- Protects against damage from loading and unloading
- Covers existing scuffs, scratches, and nicks
- Custom-fit coverage wraps around bumper lip
- Installs in minutes, protects for a lifetime
- Made in the USA with a Limited Lifetime Warranty
Features:
Specs:
Color | OE Black |
Height | 4.5 Inches |
Length | 40 Inches |
Weight | 1.1 Pounds |
Width | 6 Inches |
Release date | July 2018 |
Number of items | 1 |
18. WildAuto Smart Bumper Guard Protector Front or Rear, Black -for Smart Car All Models - Spikes Guards - 2 Pcs
★Protector : They are great for keeping people off your tail. Never have to worry about losing the piddly little caps that come stock fender ever again. This is going to damage anything that runs into the back of your car !★Easy installation : they are smooth and heavy duty , Simple twist on ins...
19. Flexyframe LD - Front Bumper Guard, Front Bumper Protection, License Plate Frame. Winner of Popular Mechanics Editors Choice Award 2012!
TWO-IN-ONE! flexyframe is a bumper guard and license plate holder. The sleek all black design does not attract unnecessary attention to your vehicle.BUILT-IN SCREW CAPS! Designed to protect your license plate mounting screws from causing major damage to other vehicles! Also covers them so they are n...
Specs:
Color | Black |
Height | 6.5 Inches |
Length | 12.5 Inches |
Weight | 0.5 pounds |
Width | 1 Inches |
Release date | May 2017 |
Size | LD |
20. FH Group F16408 F16408BLACK Universal Fit Rear BumperButler Bumper Guard Protector New Improved 2020 Version
- WARNING: Intended to be used on parked vehicles ONLY. Never drive with the BumperButler attached; using the BumperButler while driving may leave scratches on your car's exterior.
- Dimensions: 43 X 11 inches
- Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Loose dirt can be shaken out or vacuumed, and hard soiled areas can be hosed down with water and allowed to dry
- Patented, durable, and long-lasting rubber design; Fits most sedan vehicles. Strong security straps help deter theft and add extra sturdiness
- High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations
Features:
Specs:
Color | Black-F16408 |
Height | 0 Inches |
Length | 43 Inches |
Width | 11 Inches |
Release date | December 2017 |
Size | Pack of 1 |
Number of items | 1 |
🎓 Reddit experts on bumpers & bumper accessories
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where bumpers & bumper accessories are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I think you mean 2019 CR-V? I don't think the 2020 is out yet.
I posted a list here but i'll refresh it a bit for you.
https://www.amazon.com/gp/product/B07CVYHZV9/
The flat screen display is so big and flat and shiny I thought a screen protector was a very good idea. I'm afraid that over time dust and grit and cleaning will leave visible scratches on that big screen. I just randomly picked a flat glass cover for < $10 on amazon. Fits perfectly, can't really tell it is on. It is a bit polarized so if you have sunglasses on it makes the screen a little harder to read, but not unreadable.
I think the default wheel wells look kind of plain so I added on the OEM ones. They are a little small if you are looking for real splash guards but cosmetically I think they look nice. They give the CR-V a bit more of a truck look. Super easy to self install, you just put three screws in on each wheel well.
These are just color-matched plastic strips you stick on the side of the car. I like the finished look, and it definitely upscales the overall look of the car. Super easy to self-install. It comes with a cardboard template for each section that you tape onto the car, then you just peel off the self-stick adhesive and stick on the panel.
I had this on my last CR-V and I think it's a no-brainer to cover up the carpet in the back. Perfect fit, the plastic seems like it will last a while.
This is just a soft-sided box with dividers that straps and clips into the retaining clips in the back. I do find it nice for tossing in groceries and other things that would otherwise roll around. It feels kind of cheap though and I think for the price there's probably some better third party product out there. That said it is stable and fits well, and you can unclip it and fold it flat quickly if you don't need it.
Find it on this page: https://www.handa-accessories.com/crv17.html
This is just a nice fitted sunshade from Handa Accessories. It's got a cut-out for the sensor camera and fits perfectly. Must have in hot climates if you don't want to burn your hands after leaving the car in the sun.
These are thick rubber and they fit well, but the rubber is very slippery so my feet move around, and I don't love the look, especially with my Beige leather interior. In retrospect I think I would have gone for weathertech or some other third party mats in a different color and texture. I ended up throwing these out and I'm still on the carpet ones.
I think the rear panel protectors are a good purchase in order to keep the back of the car nice and tidy. It's a good look and prevents scratches when getting stuff in and out.
https://www.amazon.com/gp/product/B07BSQDQH5/
You have these on your touring doors but I wanted something similar for my EX-L. Not backlit but looks like factory.
https://www.amazon.com/gp/product/B079P88CPT/
Nice protector for the bumper. Happens to have a similar hexagon pattern to the scuff plates above, so looks good together.
https://www.amazon.com/gp/product/B078MRYNXQ/
These are great! Covers for every single surface inside the car. I got black but there are other color options.
I used Handa Accessories for the OEM stuff. I used them with my last CR-V as well and I haven't had any issues. (other than the issue above with the missing panel protector, which they fixed very quickly.) There is also Majestic https://www.hondaautomotiveparts.com . Either Handa or Majestic will be much much cheaper than your local dealer.
Understandable, and I appreciate the perspective - I would not have guessed even half of those costs.
Anyway, for me it sounds like the $400 all-said is a pretty good option. My buddy brings these guys thousands of cars to work on, so at least I know the guy doing the work wants to keep my buddy happy so he doesn’t screw up the relationship.
Then again, I’m looking at items like these:
Looks like all of them are at least primed, while a couple of them are both primed and painted to your vehicles specifications. The ebay seller in particular has tons of strong feedback and ships very quickly. I would need to look into the warranty / guarantees a bit further, but I’m wondering if I could grab one of these guys and either just install it myself (assuming I got a painted one) or bring it to a freelancer to paint (assuming I just got the primed version.)
I think I will try calling around to some of the local junk yards as well to see if I can track down any bumper covers that would work and are in decent shape. If I do this, shouldn’t I have the actual bumper part number that’s being replaced though? Otherwise aren’t I relying on the junkyard to properly identify the Camry year, trim, and engine? I’ve noticed that there are several different rear bumpers for the 2010 SE 4 cylinder. As you can see above, there’s
Yep I park on street without wifi. For now it sounds like yeah, when you have the time, sit in there with the hotspot ready and see if it starts doing a big download. Good news is in more recent software it will tell you on the software screen if there's an update available for you and it's waiting for wifi, and will even show you the progress on the screen when you connect your hotspot, so the guessing game will not last forever for you, lol.
Also since you're street parking in NY like me, I use front and rear bumper protectors and recommend them! I use this one for the rear: https://www.amazon.com/gp/product/B001RZ65MO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1
It's like a nice thick pillow unlike those thin rubbery ones, I just flip it out of the trunk whenever I park on the street. I use a front license plate one as well, Yes it isn't the prettiest looking thing but it's worth it IMO rather than stressing people tapping your bumper when they're parking. I used this one for a while (https://www.amazon.com/gp/product/B01MYZSEAW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1) but I actually DON'T recommend it because the weight eventually caused the whole plate to start coming loose. After getting it re-attached I got another lighter weight one that, unfortunately, I can't find available online anymore but here's a pic from my order if you want to search around yourself. This one has been solid, plate is still firmly attached with the tape after about 4+ months with this on and plenty days in the Summer heat. Things like this may not be for everyone but my car doesn't have a scratch or dent on it in 10+ months of street parking so I do recommend, at least the rear one since it goes right into your trunk when you're not using it!
I see. What year is yours? Was it this one by any chance?
Thanks for the help by the way. Just recently got a used prius and want to try to keep it in the best condition possible.
It's expensive to get done at a shop, but what you did was tear or shear your front right bumper guide. I've done this repair on my 330 before, it's not too hard. You'll remove the light assembly, remove the debris from the left over bumper guide, then jam the replacement into its place. The part you need is this part on amazon.
There's a tutorial here, but unfortunately all of the pictures are gone.
Best of luck to you.
i'd say it's probably a lot cheaper to buy one from a car scrap-yard. sorry to say, but i just googled the car, and found this for less than 100$. also, i'm an experienced welder and sheetmetal worker, but something like that would take probably a week of hammering a piece of sheet metal on my anvil. it;s just cheaper to buy replacement part :)
Yes sir!
TAC 3" Bull Bar Fit 2005-2019 Nissan Frontier / 2005-2015 Nissan Xterra / 2005-2007 Nissan Pathfinder Black Front Bumper Grille Guard Brush Guard (Tow Hooks Must be Removed) https://www.amazon.com/dp/B00L3WOXXE/ref=cm_sw_r_cp_api_i_81S5CbBS0A4D3
For the price it’s outstanding, I’m using it to cover up some front bumper damage until I get a tubular one.
Took a Gamble with the cheapest one onAmazon. Install was perfect, both corners poke out about 2-3 mm but way way better than I expected.
Thanks!
And damn, makes me wonder if I just didn't ask for it when I was ordering my limited... I like that pattern a lot better than the ones I'm seeing available when I shop online
https://www.amazon.com/Genuine-Subaru-Crosstrek-Bumper-Cover/dp/B00DD09HW6
The one I got is not car specific. You basically clean the bumper and lay some VHB tape, then roll the rubber thing on top of it. Wouldn't exactly recommend as the one I got seems like it is loosing it's stickyness after a month.
AutofitPro Custom Rubber Rear Bumper Protector Guard for Mazda CX-5 CX5 2013 2014 2015 2016 2017 2018 2019 https://www.amazon.com/dp/B07BX3W5SJ/ref=cm_sw_r_cp_apa_i_gEzADbRBF82TJ
I have dreams of getting these custom fit to my xB
http://www.amazon.com/2006-2010-Charger-Police-Protector-Powdercoat/dp/B00IC6K0IG/ref=sr_1_1?s=automotive&amp;ie=UTF8&amp;qid=1404345718&amp;sr=1-1&amp;keywords=police+bumper+bar
Well, as bad as that looks, she nailed the bumper cover it looks like without doing much damage to the underlying structure.
Here's a deal on a Cobra bumper cover: https://www.amazon.com/dp/B00B9EX9O0/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&amp;colid=2T2UYG1M5TGYR&amp;coliid=I3283VWRZ1Q7FC
Something to ponder if you get a good insurance check out of this (Which I hope you do).
i go this universal one: https://www.amazon.com/EJs-SUPER-CAR-Protector-Installation/dp/B01N2QV1XE/ref=sr_1_35_sspa?ie=UTF8&qid=1542651293&sr=8-35-spons&keywords=rear+scuff+guard&psc=1
but there are also vehicle specific ones that cost like 3-5x as much.
Thanks, got it on Amazon.
Here's the link:
Tyger Auto TG-GD6F60378 Front Bumper Guard Fits 1998-2012 Ford Ranger/Ranger Edge (Excl. STX) | Textured Black | Light Mount | Bull Bar https://www.amazon.com/dp/B07FMHQ5C1/ref=cm_sw_r_cp_apa_i_Ep3UDbKW4CD07
https://www.amazon.com/dp/B01N2QV1XE/ref=cm_sw_r_cp_api_i_ME1zDbKC3TSR2
It’s a pretty universal one. The instructions were crap, so I just watched a few YouTube vids to install it correctly. But so far I like it and I think it makes the car look way better.
removing all the screws in the wheel wells then drilling holes in the wheel well bonnets to zip strip them secure.
Drilling and installing these in the fender/bumper.
On MKIII+ you'll have to mod/dremmel out an area on the inside of the bumper bracket to install the quick release hardware.
Then just running 4 of the front bolts than can be removed with a Torx bit and socket wrench in about 2 minutes or less.
Its designed for a Prius but it fits WRX/STI, meant to protect the bumper when loading trunk.
https://www.amazon.com/dp/B003CSLFT2/ref=cm_sw_r_cp_api_i_rgjFDbFMR083E
Here you go mate. Welcome to city life!
Ah didn't know the OEM one was chrome. My car is red and I bought a pretty simple black rubber strip that's adhered with double sided tape.
I bought some rubber frames off of Amazon, found here. Actually adds some protection if your front bumper doesn't have a recessed area to mount your plates like mine does.
Yes.
I see it more in New York, but yeah it’s common in places where folks park on the street. Prevents scrapes and such when someone inevitably gets a little too close. Personally never owned one and I think they’re pretty ugly, but I get the appeal.
Would this work?
http://www.amazon.com/Flexyframe-LD-Protection-License-Mechanics/dp/B00881EQ1C/ref=sr_1_5?ie=UTF8&amp;qid=1449784949&amp;sr=8-5&amp;keywords=front+license+plate+bracket
As a Brooklynite, I bought this: Parking Armor from Amazon I measured in between the lights even though I flip it into the trunk whenever I drive.