(Part 2) Reddit mentions: The best multitools

>I have seen a few posts about people who don't have flood insurance, or any insurance on this subreddit (I hope its appropriate to post here) and I wanted to help you help yourself prepping to go back in to your home. I work remodeling homes, and commercial buildings and have a few tips for when you go back in your house to save a few thousand dollars.
>
>First thing is first, you need to expect total losses on a couple items; carpet and padding is gone, 100% don't bother keeping it. Drywall and plaster that have been submerged are also toast. Furniture may be salvageable, but if it has cloth or padding, assume its a loss. If it isn't REALLY expensive (custom, antique, or all sealed wood) its probably done for. These 3 things can cause health issues if not taken care of immediately. For your families sake, please don't hesitate to throw them away. Its all replaceable, your health is not.
>
>I'll preface this with the fact that I have never worked with FEMA, but only insurance companies. My knowledge and experience comes from working with them and if you have more information than I do, please add.
>
>
>
>
>
>How to prep your house:
>
>The VERY FIRST thing you do, is go to your main breaker panel, and make sure the electricity is shut off in the room you will be working. The odds of you getting shocked are negligable, but Murphy is always lurking. Once you have the breaker switched to the off position of that room you can begin the demo process.
>
>Unscrew the plates on the electrical outlets, and cable jacks. This will take a flat head screwdriver. Save these in a plastic ziplock bag to put back on later.
>
>If you have baseboard, and want to try to keep it (personally I'd just chuck it myself usually) you will need a razor knife. You will need one anyways so if you don't have one, purchase one. I'd recommend this one off amazon, but you can find simple razors for a couple bucks. The problem with cheeps, is they break easy, and you'll need the knife for your carpet too. Anyways, cut where the baseboard meets the wall, as there will be a paint layer and/or caulking there to seal it. Then use the flat head to pry the baseboard back. If you are trying to salvage the baseboard, be gentle and take your time. If you aren't trying to salvage it, bust it up and take out some anger on it.
>
>Next is your drywall. Here is a drywall saw I recommend. Go 6-8 inches above the waterline and punch it through the drywall (you can use your hand, but a hammer doesn't hurt as much) and cut it all. Rip out everything below your cut and throw it away. Then pull out any insulation in the walls, as they are soaked and compromised as well. This will help prevent mold growing in the walls.
>
>Leave any and all plumbing or electrical work exactly how it is.
>
>Next comes carpet. The carpet is only held on by tack strips (thin wooden pieces, with little nails in them) along the edges. Pull up the edges and the rest comes easy. Since the carpet is soaked, its going to be extremely heavy. This is why I would purchase the better razor knife, and cut the carpet in to pieces to haul it outside. By leaving the carpet until last, this will help your clean up from the dry wall, baseboard, and insulation immensely. The padding underneath will usually be stapled, or glued down, just rip it out.
>
>Turn the breakers back on, and put some fans in there if you have them. The more air movement the better. Obviously a lot of people won't be able to afford industrial style fans, but here is one for 40 bucks. If you can spare it, it will make a huge difference. The bigger the better, if you have the cash.
>
>I would leave cabinets where they are, and dry them out as quickly as possible. They will probably be replaced too, but once they are dry they pose no health risk, and you will probably still be using them to hold stuff until a contractor can replace them.
>
>These few things will save you thousand of dollars later on, and more importantly will keep your chances of being sick way down. In the insurance world(again I've never worked with FEMA), you get money for demolition, so you can pocket a good chunk of that, if not all of it depending on the contractors needs, and scope of work.
>
>I'd recommend getting a multi-tool as well, but they aren't necessary. They are just helpful. Here is what I use.
>
>I wish I could be there to help everyone out, and I hope this helps in some way. I'm praying for you all / sending good vibes and cash to you, but I hope this helps you out even more. Good luck, and if there is anything I can do, please don't hesitate to contact me.

>I have seen a few posts about people who don't have flood insurance, or any insurance on this subreddit (I hope its appropriate to post here) and I wanted to help you help yourself prepping to go back in to your home. I work remodeling homes, and commercial buildings and have a few tips for when you go back in your house to save a few thousand dollars.
>
>First thing is first, you need to expect total losses on a couple items; carpet and padding is gone, 100% don't bother keeping it. Drywall and plaster that have been submerged are also toast. Furniture may be salvageable, but if it has cloth or padding, assume its a loss. If it isn't REALLY expensive (custom, antique, or all sealed wood) its probably done for. These 3 things can cause health issues if not taken care of immediately. For your families sake, please don't hesitate to throw them away. Its all replaceable, your health is not.
>
>I'll preface this with the fact that I have never worked with FEMA, but only insurance companies. My knowledge and experience comes from working with them and if you have more information than I do, please add.
>
>
>
>
>
>How to prep your house:
>
>The VERY FIRST thing you do, is go to your main breaker panel, and make sure the electricity is shut off in the room you will be working. The odds of you getting shocked are negligable, but Murphy is always lurking. Once you have the breaker switched to the off position of that room you can begin the demo process.
>
>Unscrew the plates on the electrical outlets, and cable jacks. This will take a flat head screwdriver. Save these in a plastic ziplock bag to put back on later.
>
>If you have baseboard, and want to try to keep it (personally I'd just chuck it myself usually) you will need a razor knife. You will need one anyways so if you don't have one, purchase one. I'd recommend this one off amazon, but you can find simple razors for a couple bucks. The problem with cheeps, is they break easy, and you'll need the knife for your carpet too. Anyways, cut where the baseboard meets the wall, as there will be a paint layer and/or caulking there to seal it. Then use the flat head to pry the baseboard back. If you are trying to salvage the baseboard, be gentle and take your time. If you aren't trying to salvage it, bust it up and take out some anger on it.
>
>Next is your drywall. Here is a drywall saw I recommend. Go 6-8 inches above the waterline and punch it through the drywall (you can use your hand, but a hammer doesn't hurt as much) and cut it all. Rip out everything below your cut and throw it away. Then pull out any insulation in the walls, as they are soaked and compromised as well. This will help prevent mold growing in the walls.
>
>Leave any and all plumbing or electrical work exactly how it is.
>
>Next comes carpet. The carpet is only held on by tack strips (thin wooden pieces, with little nails in them) along the edges. Pull up the edges and the rest comes easy. Since the carpet is soaked, its going to be extremely heavy. This is why I would purchase the better razor knife, and cut the carpet in to pieces to haul it outside. By leaving the carpet until last, this will help your clean up from the dry wall, baseboard, and insulation immensely. The padding underneath will usually be stapled, or glued down, just rip it out.
>
>Turn the breakers back on, and put some fans in there if you have them. The more air movement the better. Obviously a lot of people won't be able to afford industrial style fans, but here is one for 40 bucks. If you can spare it, it will make a huge difference. The bigger the better, if you have the cash.
>
>I would leave cabinets where they are, and dry them out as quickly as possible. They will probably be replaced too, but once they are dry they pose no health risk, and you will probably still be using them to hold stuff until a contractor can replace them.
>
>These few things will save you thousand of dollars later on, and more importantly will keep your chances of being sick way down. In the insurance world(again I've never worked with FEMA), you get money for demolition, so you can pocket a good chunk of that, if not all of it depending on the contractors needs, and scope of work.
>
>I'd recommend getting a multi-tool as well, but they aren't necessary. They are just helpful. Here is what I use.
>
>I wish I could be there to help everyone out, and I hope this helps in some way. I'm praying for you all / sending good vibes and cash to you, but I hope this helps you out even more. Good luck, and if there is anything I can do, please don't hesitate to contact me.

>I have seen a few posts about people who don't have flood insurance, or any insurance on this subreddit (I hope its appropriate to post here) and I wanted to help you help yourself prepping to go back in to your home. I work remodeling homes, and commercial buildings and have a few tips for when you go back in your house to save a few thousand dollars.
>
>First thing is first, you need to expect total losses on a couple items; carpet and padding is gone, 100% don't bother keeping it. Drywall and plaster that have been submerged are also toast. Furniture may be salvageable, but if it has cloth or padding, assume its a loss. If it isn't REALLY expensive (custom, antique, or all sealed wood) its probably done for. These 3 things can cause health issues if not taken care of immediately. For your families sake, please don't hesitate to throw them away. Its all replaceable, your health is not.
>
>I'll preface this with the fact that I have never worked with FEMA, but only insurance companies. My knowledge and experience comes from working with them and if you have more information than I do, please add.
>
>
>
>
>
>How to prep your house:
>
>The VERY FIRST thing you do, is go to your main breaker panel, and make sure the electricity is shut off in the room you will be working. The odds of you getting shocked are negligable, but Murphy is always lurking. Once you have the breaker switched to the off position of that room you can begin the demo process.
>
>Unscrew the plates on the electrical outlets, and cable jacks. This will take a flat head screwdriver. Save these in a plastic ziplock bag to put back on later.
>
>If you have baseboard, and want to try to keep it (personally I'd just chuck it myself usually) you will need a razor knife. You will need one anyways so if you don't have one, purchase one. I'd recommend this one off amazon, but you can find simple razors for a couple bucks. The problem with cheeps, is they break easy, and you'll need the knife for your carpet too. Anyways, cut where the baseboard meets the wall, as there will be a paint layer and/or caulking there to seal it. Then use the flat head to pry the baseboard back. If you are trying to salvage the baseboard, be gentle and take your time. If you aren't trying to salvage it, bust it up and take out some anger on it.
>
>Next is your drywall. Here is a drywall saw I recommend. Go 6-8 inches above the waterline and punch it through the drywall (you can use your hand, but a hammer doesn't hurt as much) and cut it all. Rip out everything below your cut and throw it away. Then pull out any insulation in the walls, as they are soaked and compromised as well. This will help prevent mold growing in the walls.
>
>Leave any and all plumbing or electrical work exactly how it is.
>
>Next comes carpet. The carpet is only held on by tack strips (thin wooden pieces, with little nails in them) along the edges. Pull up the edges and the rest comes easy. Since the carpet is soaked, its going to be extremely heavy. This is why I would purchase the better razor knife, and cut the carpet in to pieces to haul it outside. By leaving the carpet until last, this will help your clean up from the dry wall, baseboard, and insulation immensely. The padding underneath will usually be stapled, or glued down, just rip it out.
>
>Turn the breakers back on, and put some fans in there if you have them. The more air movement the better. Obviously a lot of people won't be able to afford industrial style fans, but here is one for 40 bucks. If you can spare it, it will make a huge difference. The bigger the better, if you have the cash.
>
>I would leave cabinets where they are, and dry them out as quickly as possible. They will probably be replaced too, but once they are dry they pose no health risk, and you will probably still be using them to hold stuff until a contractor can replace them.
>
>These few things will save you thousand of dollars later on, and more importantly will keep your chances of being sick way down. In the insurance world(again I've never worked with FEMA), you get money for demolition, so you can pocket a good chunk of that, if not all of it depending on the contractors needs, and scope of work.
>
>I'd recommend getting a multi-tool as well, but they aren't necessary. They are just helpful. Here is what I use.
>
>I wish I could be there to help everyone out, and I hope this helps in some way. I'm praying for you all / sending good vibes and cash to you, but I hope this helps you out even more. Good luck, and if there is anything I can do, please don't hesitate to contact me.

Lots of others have mentioned great projects, so let me give you a general overview of what you should know, and then you can tackle just about anything.

For every project:

• Watch youtube videos for whatever you want to do until you're pretty comfortable. Make sure the person looks professional. "This old house" is a great resource.
  
• ALWAYS take off jewelry and things like wallet chains. Wedding bands are especially notorious for electrical accidents or something awful called "Degloving." Google if you want to be horrified or have an iron stomach when looking at gore.
  
• Most projects are "Safe" if you know how to disengage and engage the shutoffs and what to watch out for.
  
• Assume whatever you're using is going to spread everywhere (sawdust) or get on things you'd never expect (spray foam on the nice rug 10' away). So cover them or move them.
  
  Electrical:
  
  
• Buy a non-contact voltage tester. It'll tell you if you're about to shock yourself or not. Check it every time you walk away and come back. I also put masking tape over breakers I'm working on just in case somebody walks by and decides it needs to be flipped.
  
• Always work with your right hand only (even if you're left handed). This is to keep a shock from traveling through your heart, which is on your left side of the body. Don't work on a wet/damp surface. Wear thick wool socks and shoes or boots with lots of rubber left on them.
  
  Plumbing:
  
  
• find your whole-house water shutoff, and the shutoffs (if they're there) for the sink or wherever else you're working.
  
• Also, if you do anything with compression fittings, under-tighten them (never over-tighten). Turn the water on (just a bit) and if it's dripping, do a quarter turn and wipe dry with a towel. Repeat until it's no longer dripping. If you overtighten them, they'll leak and you can't undo it without replacing the fitting. It took me 5 trips to Home Depot to learn this...
  
  General:
  
  
• Never climb a ladder without somebody else around. Always take the time to go down it, if you have to fiddle with changing drillbits or something, or have the helper-person take care of it (and hold the ladder when needed). It doesn't matter how good your ladder is, if you're pushing against a wall with a drill, you can easily destabilize yourself.
  
• Buy a deadman's switch that plugs in like an extension cord, and swap it to any saw or cutting device you are using (even the dremel). Alternatively, spend a few more bucks and get a variable speed foot pedal.
  
• Don't do anything you don't feel like you "know" enough to do, yet.
  
• Learn how blades buckle in saws, and about kickback, before using power saws.
  
• Use a GOOD stud detector before going into the wall. If you hit something hard and you aren't sure what it is, back the drill out and take a look. You could be hitting a water pipe, an electrical cable, or are just unlucky and hit a nail in the stud.
  
• Use goggles and hearing protection. Your ears don't feel pain. Power tools are louder and more damaging than they sound like.
  
• Working with chemicals? Use a gas mask (I like a full painter's mask that incorporates eye protection, because they don't fog like goggles can with a mask on).
  
• Working with dust, use a dust mask or gas mask.
  
• If you have gas mask, you have to seal the cartridges or they go bad fast.
  
• Go to Walmart (because it's much cheaper) and buy a gallon of their solvents before working with chemicals. Know which solvent works on what. Buy low VOC mineral spirits (if available), and acetone. Mineral spirits is going to be for exterior/oil paints, shellacs, and stains. Acetone is going to be for spray foam, certain adhesives, etc. Get an empty tin can with a lid for storing the "used solvent." Btw, I reuse my solvent several times, basically as a "prewash." The sediment falls to the bottom.
  
• If you're working with something creating sparks (angle grinder) be aware of where those sparks are flying, have a nearby fire extinguisher, and if you can, dampen the area first (like mop your garage floor). Angle grinders combined with dust, sawdust, and/or scrap wood has started fires.
  
• If working with oil based products/mineral spirits, learn how to properly dispose of things like brushes and rags, they can spontaneously combust if left in a heap!
  
• Be aware that on high-end drills, there's a button that can lock them into "always on" mode.
  
  Tool List
  
  
• Non-contact voltage tester (and other useful items)
  
• 3M Full Face Gas Mask There's cheaper chinese knockoffs. You have to buy cartridges (get a set for dust and at least one set for VOC - aka gasses like mineral spirits and ammonia)
  
• Variable Speed Foot Pedal Can be used like a deadmans switch by fully depressing.
  
• Water/leak alarms for peace of mind or sudden failures
  
• Stud finder with live AC and metal detection
  
• Hearing Protection
  
• Goggles (observe where the vents are and if it looks like dust can easily fall into them) or just use the face mask
  
• Acetone
  
• Mineral Spirits
  
• Metal, lidded, disposal bucket. A paint bucket with a lid also works. Note that paint buckets are a different kind of plastic specifically made to resist solvents.
  
• A large pack of disposable gloves (make sure they aren't something you or a helper are allergic to, eg latex).
  
• Inspection Camera
  
  Projects to avoid as a beginner
  
  
• Major reconstruction (wall removal)
  
• Retaining walls over 1' tall
  
• HVAC
  
• Tile
  
• Traditional wood plank flooring (BUT engineered/click-lock is super easy)
  
• Plumbing that isn't compression fittings or threaded (aka, plex/sharkbite/welding)
  
• Anything on the roof
  
• Anything attached to the outside of your home (where you might inadvertently create leaks or rot in your exterior walls)
  
• Precise woodworking (altering your cabinets in your kitchen)
  
  Projects I'd always recommend hiring out
  
  
• Tile with real stone, metal or glass
  
• Granite anything
  
• Decks (probably, although make sure the deck builder knows how to properly attach to a house. 70% of decks in the USA aren't and are causing rot and damage)
  
• Structural engineering (wall removal/additions, tall retaining walls)
  
• Most HVAC
  
• Solid wood plank floor or refinishing. (Refinishing is possible, it's just a good 10 hours of work per 50 sqft, or more, super dusty, and makes the house pretty unlivable. Easy to screw up. Best to get an experienced pro in to do it quickly).
  
• Anything near your "mains" that feed into your breaker-box (the part coming from the electrical company). Such as replacing the breaker box itself.
  
  Home improvement is very satisfying and not all that hard. Most people have a story of being lazy once or twice and having a near accident. I've been shocked by 120v (like in your wall)... twice. I've had saw blades break. Just be safe for that 5% of the time you're using something dangerous, and never get too lazy to grab the safety gear.

From Top Left to Right.

Gearward Compact Survival Cord Mini, 25’
[http://gearward.com/collections/frontpage/products/compact-survival-cord-mini-technora]


Tucked inside the folds of the cord are: a micro neodymium magnet, a pen spring, a small safety pin.
[https://www.amazon.com/10-100pcs-Neodymium-Strong-Magnets-MarbellStore/dp/B01LZEJWVK/ref=sr_1_1?ie=UTF8&qid=1484275063&sr=8-1&keywords=micro+neodymium+magnets].
Have actually used this for: fishing some ladies keys from a grate at the school before the janitor could show up. Also repaired a neighbour’s skate lace with the cord.

Night Ize Inova thumb light (three functions, bright, medium, flash)
[https://www.amazon.com/Nite-INOVA-Ultraviolet-Microlight-Clip/dp/B00CG17GDA/ref=sr_1_2?ie=UTF8&qid=1484275003&sr=8-2&keywords=Nite+Ize+inova]
Have actually used this for finding a lost earring in a dark movie theatre. Thought I would use it to find the locks on my house and car, but everything is pretty well lit.

Stanley Key Chain Tape Measure
[https://www.amazon.com/Toysmith-Key-Chain-Tape-Measure/dp/B000F4G5NW/ref=sr_1_fkmr1_1?ie=UTF8&qid=1484274328&sr=8-1-fkmr1&keywords=stanley+keychain+tape+measure+1m]
Have actually used this for buying a new sideboard from an antique shop. Knew the measurements of the room and used this to determined it wouldn’t fit in that room. LOL.

Nite Ize inka Mobile Pen
[https://www.amazon.com/Nite-Ize-Mobile-Stylus-IMP-M1-R7/dp/B00BAWSOD2/ref=sr_1_2?ie=UTF8&qid=1484275029&sr=8-2&keywords=Nite+Ize+Inka]
Have actually used this tons of times whether someone doesn’t have a pen, or for myself at the passport office or recently at the lawyer’s office.

Prime-Lite 5-1 Multifunction Keychain with Light
[http://www.prime-lite.ca/camping_outdoors/5-in-1-multifunction-keychain-with-light-24-852.html]
A new addition. I like the full sized Phillips screwdriver bit. Has a flashlight. Used it to open the bottom of my son’s new RC car’s battery compartment. Has a knife, too. Good for package opening. Not much else.

[Nite Ize DoohicKey Keychain Multitool]
(https://www.amazon.com/Nite-Ize-DoohicKey-Multi-Tool-Stainless/dp/B00FIX126K/ref=sr_1_2?ie=UTF8&qid=1484274688&sr=8-2&keywords=Nite+Ize+keychain).
Actually used this recently to pry open my frozen gas cap cover.

[Mini Bic Lighter]
(https://www.amazon.com/Lot-Bic-Mini-Multi-colour-Lighter/dp/B00863XN4I/ref=sr_1_1?ie=UTF8&qid=1484274798&sr=8-1&keywords=mini+bic)
To light cigs, mostly. Haven’t needed to start any urban fires. But… I wrapped over it a thin layer of [To-Go Gorilla Tape] (https://www.amazon.com/Gorilla-6100101-2-Duct-Tape-Black/dp/B01M2AAGTZ/ref=sr_1_1?ie=UTF8&qid=1484274817&sr=8-1&keywords=travel+gorilla+tape) and generic electrical tape at the base. [I interwove the electrical tape through a generic (plastic coated) paperclip so that it acts as a keychain. Haven’t lost one yet.]. I used the duct tape recently when a poster fell down at my kids’ Christmas recital and I was able to peel a few pieces off for the teacher to put it back up.

[Mini Sharpie Marker]
(https://www.amazon.com/Sharpie-Permanent-Markers-Assorted-4-Count/dp/B000GOZXA2/ref=sr_1_1?ie=UTF8&qid=1484274852&sr=8-1&keywords=mini+sharpie+marker)
Used it recently to write a nasty note to a jerk who dinged my car. Also to get an autograph on a menu of an actor you’ve probably never heard of, but who was big growing up in Toronto.

[Generic Folding Travel Scissors]
(https://www.amazon.com/UCEC-Scissors-Xiaoquan-Slip-N-Snip-scissors/dp/B0199VSV42/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1484274914&sr=1-1-spons&keywords=folding+scissors&psc=1)
Sharper than I expected. I recently used this to save the day when my son refused to wear his new Christmas sweater for a family picture because the tags were itching his back. Snip. Problem solved.

[Gerber Dime Micro Tool]
(https://www.amazon.com/Gerber-31-001040-Dime-Micro-Tool/dp/B0079J51JU/ref=sr_1_4?ie=UTF8&qid=1484274877&sr=8-4&keywords=gerber+dime)
Good to have this as it has pliers, but I haven’t used it other than to pull yellow lego heads out of lego helmets.

[Nite Ize Key Rack Locker]
(https://www.amazon.com/Nite-Ize-Stainless-Carabiner-MicroLocks/dp/B00FIX12AG/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1484274970&sr=8-1&keywords=Nite+Ize+Keychain)
A good way to keep it all together. These clips don’t lose their… clippieness.


So, I love this little EDC. Will continue to use it, thought I don’t see many ways to improve it!

You have lots of good selections in your list. Dunno about the shoes, do they really have lots of holes? Mosquitos will LOVE that!

Here are some camp kitchen suggestions that add value w/out hassle

Thin cutting/prep surface

Cheap kitchen knife with sheath for easy stowage(pick one or two)

Cheap non-stick frying pan(I got one for a few dollars at a grocery store)

Cheap heat-resistant spatula

Exxxxtra loooong tongs for cooking over a fire. Them coals get HOT.

The amount of different meals you can make with these is amazing. Eat a steak or salmon instead of MRE's... Cook bacon, sausages and scramble eggs for the camp...

I also recommend a small vise-grip for when you're wrenching and need a third hand. I splurged on the Leatherman Crunch and I love it.

And to jump on the bandwagon, go for smaller tent and a hatchet.

There are so many knives and pocket tools, and what you like depends on how you're going to use it and what your general aesthetic is.

Trimming nails? Opening envelopes? Tightening screws? Cutting wire? Peeling oranges? Fending off wolverines?

Wood? Steel? Plastic?

Tell us what you want to use it for, and what material you prefer.

Here are a few of my favorites:

Great combination of tools, including good phillips:

https://www.amazon.com/Victorinox-Swiss-Rambler-Pocket-Knife/dp/B000FNFXQS

Great wire clippers/strippers; good other tools:

https://www.amazon.com/Leatherman-Squirt®-Es4-Multi-Tool-Blue/dp/B0032Y4ITU

Classic three blade wood:

https://www.amazon.com/Buck-Knives-0371BRS-Stockman-Woodgrain/dp/B000EHYZNC

Classic metal:

https://www.amazon.com/Kershaw-1600-Chive/dp/B0009VC9RW

Great small tool with a clip and good scissors:

https://www.amazon.com/Leatherman-Style®-Multi-Tool-Stainless-Steel/dp/B0032XVNMQ

OK. Here are some EDC options, knives and other things.

• Great utilitarian folder: Spyderco Paramilitary.
  
  
• Great "gentleman's folder" option: Benchmade 707 (as well as a few other models), Mcusta, a few spydercos... let me know if you want more options in these.
  
  
• Maxmadco pen, or Fisher Space Pen.
  
  
• Rite in the Rain notepads I keep a small one in my back pocket.
  
  
• A nice leather wallet.
  
  
• Key chain multitool (I love this one).
  
  
• Small EDC flashlight.
  
  ummmm, let me know if you need more suggestions.
  
  Edit: you will have to shop around for best prices... no idea where it would be cheapest for each of these products.

The [Victorinox Swisstool Spirit X](https://www.amazon.com/Victorinox-SwissTool-Spirit-Multi-tool-k tLeather/dp/B0027MSC2M/ref=pd_sbs_468_1/133-7022528-5217954?_encoding=UTF8&pd_rd_i=B0027MSC2M&pd_rd_r=d9fcd87f-332a-11e9-b385-1de323ee2e58&pd_rd_w=V2Hg4&pd_rd_wg=LaQuD&pf_rd_p=588939de-d3f8-42f1-a3d8-d556eae5797d&pf_rd_r=G0WBBQZFWCY1YD32PSNR&psc=1&refRID=G0WBBQZFWCY1YD32PSNR) would be better rust resistance than the Leatherman. It's a little bit softer metal, but much better corrosion resistance. That's the best that I can think of.

Either way, if you're using it in saltwater, you need to be cleaning it after each use. At least rinse it in fresh water (and probably lightly oil it too). Salt water is super harsh for any metal that's not specifically designed for salt resistance (which none of the multitools on the market are). The Swisstool Spirit X is the highest corrosion resistance available in a multitool that I know of.

Not quite as comprehensive as the tool kit you listed but I use this:

http://www.amazon.com/gp/aw/d/B0045KYOGM/ref=mp_s_a_1_1?qid=1463523345&sr=8-1&pi=SX200_QL40&keywords=rosewill+45+piece&dpPl=1&dpID=515tbNl4TDL&ref=plSrch

Probably wouldn't help with smartphones but it has been a godsend for working on computers.

(Edit) I just noticed they also have a 90 piece set and 143 piece set which may work for you, and the quality of the tools is really good.

Nice, should be reasonably straight forward. I saw that you were worried about the CPU--that part is intimidating but also not as bad as it seems. There is plenty of space around the edge to hold on without touching the pins. Just look the chip and the motherboard over carefully before you pick them up to see how to align the chip--there's a notch in the corner to make sure it fits right.

Do you have any tools and a static strap? You'll probably need a small screwdriver, and the static strap gave me peace of mind, though you don't necessarily need it.

I got a tool set like this, and it was super useful to have everything I needed in one place. The best item was the little part grabber for when you inevitably drop a screw somewhere in the case or on another board. I think one of the tools is also to help you hold the cpu while you install it. The $22 version has a static strap plus some other tools, or you can buy the static strap separately.

Edit: Realized something later--straight forward doesn't mean error or mistake free! Take it slow, and if something isn't working, back up a few steps and figure out what went wrong. Worst case, pull it all apart and start over! Don't want you thinking you're bad at this after everyone said how "easy" it is when you realize at the very end you put something in upside down or missed some screw. Everyone does that!

I carry the Gerber Dime Travel on my keychain every day. I always have a knife on me anyway so it's okay that it doesn't have a blade. I have no need for a larger multi tool for EDC, but that's just me. All the right tools in a really compact package. IMHO better than a leatherman squirt. I love the outboard tools on the dime. Hands down the biggest reason I dislike most larger multi tools is that you have to open the pliers and close them again to use the more commonly used tools. I've owned a couple of these and they're always good quality yet still replaceable at that price. They also come in an option with blades if that works better for your EDC setup.

I'd say the Wave Plus would be best in that situation. The Wave really is lestherman's best Jack of all trades tool that's light enough and small enough to have with you when you need it: https://www.amazon.com/gp/aw/d/B079MJBP21/ref=mp_s_a_1_2?ie=UTF8&qid=1526727800&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=leatherman+wave+plus&dpPl=1&dpID=41ucMMAz7TL&ref=plSrch

Plus, there is an excellent pocket clip available: https://www.amazon.com/gp/aw/d/B0002H49DA/ref=mp_s_a_1_3?ie=UTF8&qid=1526727825&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=leatherman+pocket+clip&dpPl=1&dpID=31H04mns7zL&ref=plSrch

Welcome back! We'll need to see pictures of the dogs.

Book: Sphere, by Michael Crichton

Movie: The Fall (Don't start, /u/spacesoulboi)

Music: OK Computer, by Radiohead

Bushcraft item: Mora Bushcraft, Stainless/High Visibility Orange

$50+ item: Leatherman Rebar, if you don't already have a nice multi-tool. An Alaskan hiker/camper probably ought to!

Edit: Why the Braves? I also love pink and Flowers for Algernon, btw.

I'd consider something like the Leatherman Wave or Surge. They're quite similar but the surge is larger and has more tools, the wave is pocket friendlier version. 25 year warranty and it's a good reliable warranty they'll fix/replace no matter what you do to it if you manage to break it.
They are both around the $100 dollar mark and are considered to be in the higher echelon of multi-tools, real, hard working useable tools. it's a worthwhile investment for something you'll probably use daily.

I'd also consider buying the Leatherman bit kit. It has a wide selection of flatened lightweight screwdriver bits that will fit the Wave or Surge's bit holder. Between the tool and the bits you can put together/take apart just about anything in a relatively light weight package.

Thanks for reminding me I didn't have good wire strippers on the list yet. I grabbed a hammer crimp lug tool for $20 that I think will be perfect for the 6 or so 4/0 cables i'll make for now. The Fluke is still a bit high, for setting gains and general audio work is there a more budget brand? I understand it won't be a buy it for life. I keep seeing the Amprobes recommended, for audio work feature wise would the 510, 520, or 530 be sufficient? Perhaps this Klein test kit and some leads?

Just bought this on a recommendation from a member here: http://www.amazon.com/Ontario-Knife-Folder-AUS-8-8860OD/dp/B00E812K4G/ref=pd_sim_sg_3?ie=UTF8&refRID=1799C4M9R50TK4R9Z0P1


The build quality is amazing, the blade takes a VERY keen edge, it has a four way adjustable pocket clip, and it's quite affordable. Highly recommended.


I also carry a Gerber Dime multitool at all times: http://www.amazon.com/Gerber-31-001040-Dime-Micro-Tool/dp/B0079J51JU/ref=sr_1_3?s=sporting-goods&ie=UTF8&qid=1417460468&sr=1-3&keywords=gerber+dime


It's small, and a full size Leatherman will beat it six ways to Sunday, but it's much nicer and more capable than a Micra. Since it's so tiny I actually can carry it at all times without needing a belt case.

I use a Leatherman Juice CS2 & find it's scissors to be the best whenever I'm cutting Cat 5. I have a Paladin Tool that I never use cuz this little guy is the bomb. The locking Screwdriver blades are great, BTW. Blows Gerber away.

My normal EDC (not including cell phone, car keys and CCW as they all cost more than feasible for this situation) is a multitool/knife, flashlight, wallet, watch, pen and bandanna.

Multitool: Leatherman Squirt PS4, $28.75 Not the biggest or baddest MT out there, but it will do pretty much every EDC task I can think of needing to do.

Flashlight: [ThruNite Ti5, $15.95](
https://www.amazon.com/ThruNite-Compact-Penlight-Output-Firefly/dp/B014SGM234/ref=sr_1_12?ie=UTF8&qid=1478977407&sr=8-12&keywords=thrunite) Hard choice between this and the Streamlight Microstream.

Wallet: Big Skinny Metro, $19.99 Carried Big Skinny wallets for years. Only recently switched to Recycled Firefighter, just for a change in pace.

Watch: Casio Calculator, $14.99 The ultimate nerd watch.

Pen: Zebra F-701, $4.63 Best damn pen I've ever used.

Bandanna: Rothco Solid Black Bandanna, $5.87 Any cotton bandanna will do, I just picked this one because it was solid black.

The grand total is: $90.18. The remaining $9.82 will buy me a six pack of mid tier craft beer.

Have you seen the SOG Kilowatt? Pretty cool piece of gear I gifted to someone starting out in an electrical career center in high school. It has cool details like an electrical tower for a pocket clip. I work for a low voltage contractor and have added a Leatherman Squirt ES4 to my EDC. Love the wire strippers on it.

Just so you know (if you didn't already), you can find better pricing on Amazon.

Leatherman Squirt $22-23 dollars.

Gerber Dime $15.88 with Free Shipping.

Heck, buy two Leatherman squirts, get the free shipping from Amazon and keep one for yourself!

I've played with them, but I prefer my leatherman juice s2. It's got scissors and more screwdriver options. The only downside is the blade takes two hands to deploy. I use it all the time though and I strongly recommend everyone to carry one.

I used to carry one of the little keychain gerbers around but the pliers weren't strong enough for me.

For anyone interested in getting a multitool, I recommend checking out the nutnfancy videos over on youtube.

I always bring a few items to every show I do to prevent those "oh shoot!" moments:

• Leatherman Wave- I love this multitool. I'd recommend the extra bit kit as well. It all fits in the included sheath.
  
• Sound Tools Sniffer Sender, available in many flavors.
  
• Electronics tool kit, any brand with a similar assortment of bits will do.
  
• QBox, as others have mentioned. It is so incredibly useful and while it is pricey, there is no alternative that I'm aware of that will do what it does and saves my ass like it does.
  
• SD Card 16-32GB, as well as a 64GB flash drive for last minute file transfers. Be careful what format you choose for the flash drive- pick something that will work across as many computers/mixers/recorders as possible. Research what gear you use and see what format they accept. As a rule of thumb, don't store vital or long term files on the SD card because it will likely get formatted for every use because each device is different.
  
• Backup battery pack for charging phones (10,000 mAh+) – this works well for powering many 5v items like converters and some small DA's
  
• Gender benders- Male to Male, Female to Female
  
• Ibuprofen - more of a "gig bag" item than a WTF kit item, but I always bring some with me in a small travel size pill container.
  
• Head Lamp. It is so useful to have. When I don't need it, I hang it around my neck if my kit isn't nearby.
  
• Batteries in dedicated caddy. I keep half and half alkaline and Ikea LADDA rechargeable AA's as well as 4 9v cells with me.
  
• One or two backpack rain covers. One for my pack, and one for a small piece of equipment on stage that needs to covered in a hurry. The elastic around the outside helps it stay secured.
  
• Phone charger and additional USB cables. I bring two Lightning cables for my Apple devices, but I also bring a USB Mini B and USB Micro B just in case.
  
  Ninja edit for links and more detail.

Is this a Condor deployment bag?

Edit : also, looks very well thought out. I'd recommend a small Leatherman like the Juice S2 to replace the SAK just because it has a bit more capability. And also the Endura is a great knife choice for a first aid kit.

Leatherman Skeletool is the most compact full sized multitool that I would recommend (on sale at Home Depot for $30 also). If you're looking for something smaller, maybe the Squirt ES4 that has wire strippers.

For knives there's a lot of options. Did you have a preference on cost, size, blade shape, lock type, assisted vs manual?

There's also a lot of options for flashlights. Did you have a preference on size, rechargeable/battery type, endcap switch vs twist operation?

Lighter I would just go with a Bic.

Fisher Space Pen or maybe a fountain pen.

Rite in the Rain notebooks seem to hold up really well.

Nomad makes a compact iPhone cable that can go on your keys.

Don't really have any experience with battery banks unfortunately.

I've been really happy with my Trayvax wallet, really easy to clip to something when you're out in the woods so you don't lose it.

>Hosting costs money

You should add an ad or a donation button.

Leatherman Wingman

It's fulfilled by Amazon if you buy it from here. It might save you some money on shipping.

Thanks for the giveaway!

Eh, my friend has an infomercial for one of his products which is pretty legit. I believe it used to be sold at Radio Shack (RIP). It's Wallet Ninja for those interested. Apparently, they're affective because there are billions of midwestern housewives waiting by the TV with credit cards and nothing better to do.

Looking at these comments... why not just get a Large Cybertool?

You said you work in a datacenter and are in IT and that's pretty much what this tool is for. Has a fine set of pliers for server duties. Interchangeable bits built into the tool and other things I've always found really useful working in a datacenter, namely the magnifying glass and LED light.

Best of all it's smaller than most of the other tools you mentioned and Victorinox is arguably the best built. Also it will resist rust better than Leathermans in my experience.

edit if you want to go a little smaller, this is the Medium Cybertool which keeps the bit driver and pliers but gives up some extras.

Good call. I have used the Leatherman Wave for years and love it (lost and replaced it 2 times).

Amazon has it for $65:

http://www.amazon.com/Leatherman-830037-Multitool-Combination-Leather/dp/B000JCN6C8/ref=sr_1_11?s=hi&ie=UTF8&qid=1414686995&sr=1-11&keywords=leatherman+wave

There's also less expensive ones like the Sidekick:
http://www.amazon.com/Leatherman-831426-Wingman-Multi-Tool/dp/B005DI0XM4/ref=sr_1_7?s=hi&ie=UTF8&qid=1414686995&sr=1-7&keywords=leatherman+wave

I would recommend NOT buying the cheap knock-offs. I've owned several over time and have just about lost fingers from poor locking mechanisms, etc. Make sure the blades and tools lock solidly (the Wave does).

Not sure if this is a family gift swap or adults only, so here are suggestions for both!

For families:

• Salsa Bowl +Salsa Grow Kit
  
• Gourmet Chocolate Pretzels
  
• Delicious nut & sweets sampler box
  
• Table Topics for Families
  
  For adults:
  
  
• Mulled Wine gift set
  
• Paint by number kit
  
• Crab Multi Tool
  
• Laptop Desk for your bed or couch

This is such an awesome thing to do, thank you.

https://www.amazon.com/Gerber-MP600-Bluntnose/dp/B001AC1C6I/?tag=parametrek-20

This would be really helpful for work.

When life gives you lemons, take them because free stuff is neat. Thanks! https://www.amazon.com/Gerber-MP600-Bluntnose/dp/B001AC1C6I/?tag=parametrek-20&th=1

Woah, time out bro, I got you covered! I just checked Amazon and look what I found for $78.09 and free shipping!

I've purchased gift cards for my Canadian pen pal on Amazon.ca before, so I know you can purchase things off a foreign Amazon with your local card. The question is, will Amazon.com ship to Canada?

Try punching your address in and see if it will let you. If not, I can order it and mail it to you!

Plus the pliers actually hurt your hand if you have to squeeze anything with a decent amount of force. The handles are too thin and there are edges of tools on the handles as well. Its just not very ergonomic.

I've had the Leatherman Wave on my belt for a few years now, survived a trip to the mid-east, it's by far the best multitool I've ever had.

Edit: I'd probably get a Leatherman New Wave if I had to buy one today.

Edit2: Mine totally has the saw and file, I don't know what I was thinking. I've got no idea what the difference is between the wave and the new wave. Maybe it's just Amazon putting a "New" label on the item.

Damn! I am on an ipad so this kind of sucked to do. I had to use muro and then took a screen shot! It's extra ghetto!

this is my reimagining of his fight against butte bean. I love his ass in the air taunt!

As a note happy early birthday. To be honest I don't know much about MMA, but I do know of genki sudo. If you don't know him, here is his highlight reel.

He is also the artist behind the song new world order. You've probably seen his gif of Japanese men in dress suits dancing in synch.

Edit: I forgot my martial arts related thing! Is this bear grylls survival multitool count? You know, for all those street fights I get into. If the bear grills tool is a stretch, this would be appreciated as well. (^▽^)

Great and awesome idea for a giveaway. Here is my Entry

My wife keeps her pink camo pocket knife I got for her with her.

I want to get her a Gerber multi-tool, like the one I got issued in the Army, and miraculously kept without having to pay for. The black oxide coated stainless steel one

Amazon has it on Prime, for cheaper too!

e: she'd probably wear it appendix style, in the black nylon holster.

But a pistol magazine pouch would work good, too. Better. Thinner, slimmer. I used to keep my Gerber in a pistol pouch on my gear when I was in the Army. Had the same Gerber in the same pistol case through 2 rotations of training and deployment.

I enjoy my Leatherman Wave, some may find it bulky but I love it.

If you can find one for that price, Leatherman Wave. Mine came with a leather belt sheath with an elastic side (I store a 4" crescent in it). There is a the Super tool, Surge and a few others as well, not sure on the price.


http://www.amazon.com/gp/aw/d/B000JCN6C8/ref=mp_s_a_1_9?qid=1413566207&sr=8-9&pi=AC_SX110_SY165_QL70

I work in a chemical plant and the Leatherman/crescent wrench combo save me all the time.

This is a pretty great deal

I used to carry a metal tool the size of a credit card. It seems that something like that might be easier to carry in a billfold than coins, plus it comes in handy.

https://www.amazon.com/Wallet-Ninja-Multi-purpose-Credit-Pocket/dp/B00JJVBGU4

I picked up a pair of these so I could have a small vice-grips on my belt. Works great in a pinch, and has saved me a trip back to my main toolbox more than a few times. http://amzn.com/B0007UQ1EC

Hubby needed a gift for work and I saw an Amazon that they had this multi-purpose pocket knife that was in the shape of a crab. It wasn't too tacky looking, it looked like it would be functional. Since Maryland is known for blue crab that would be something a little less ordinary.

Other ideas would be to get some themed coasters, actually if you just search Maryland on Amazon you can find a whole bunch of stuff.

Kikkerland CD114 Beechwood Crab Multi Tool, Stainless Steel https://www.amazon.com/dp/B01LYLV3DR/ref=cm_sw_r_cp_taa_8r9.BbZ94G17S

Clippers? Do you mean nail clippers? Because those are incredibly uncommon on multitools. I can't think of one off the top of my head that has one.

The other tools all show up on the Vic Classic and the Leatherman Style CS, Micra, and Style. None of those have pliers, though. You didn't mention them, but if you want pliers, a knife, and tweezers on the same tool I think the Gerber Dime is one of the rare few (only?) to do that. Despite being Gerber, I hear it's OK, but take that with a grain of salt; I've never used one.

EDIT: Misplaced an "a".

A nice Leatherman multitool with something sweet (re: not too cheesy if his friends borrow it) engraved is something he would look at more often...

Make the scrapbook and save it for when he comes back - too easy to get lost / stolen / damaged in transit or while there.

In the tank bag:

• Small ratchet set (5mm - 14mm) (these arent the best in the world, but they're compact and good enough)
  
• Multi-tip screw driver
  
• Leatherman Crunch (folding vice grips with drivers)
  
• Tire pry-bars with 22mm and 24mm box ends.
  
• Electrical tape
  
• Zip Ties
  
• two sets of allan keys (2mm - 10mm) (One folding and one standard)
  
• set of Torx keys (folding pocket style)
  
• CO2 tire inflation
  
• Puncture patch kit
  
  This all fits in ONE side pocket of my tank bag. I do this because not every bike has enough under seat storage (because the DynoJet PC-III USB takes up too much room).
  
  On my older bikes I add a butane soldering iron, electrical crimps, and spade connectors. I've had to rewire a rear rectifier in the field before and it really helps (Known issue of melting connectors on the old Honda V4's)
  
  

Like he said, buy a tester or a multimeter. The plug tester is a little easier to use but the meter has more precise information. Klein Tools 69149 Electrical Test Kit https://www.amazon.com/dp/B00J9Q5FCE/ref=cm_sw_r_cp_apa_Ir0SybS733K9S l other companirs make them to but klein is my personal favorite

One of my favorite gifts for my friends is a business card sized multitool! Ex: http://www.amazon.com/Wallet-Ninja-Multi-purpose-Credit-Pocket/dp/B00JJVBGU4

I'll try to think outside of the box on this one.

How about a multitool?

I mean in shop work you will probably use the pliers at least as much as your knife and other tools like screwdrivers as well.

If you want one that is below $40, the Leatherman Wingman might be just right for you, as it has a decent selection of tools, including a one-handed opening locking blade that will be fine for most tasks (I own one and it is one of my most used blades).

It is relatively light and has a pocket clip, so you could EDC it in your pocket or in a belt sheath.

I have the Gerber Dime. It's pretty good. I got mine for cheaper at Target though.

Yup, with those you set the direction of the torque and you can twist your hand really fast back and forth to loosen or tighten the screw, instead having to take your hand off the handle.

EDIT: Spend a little more and get this, lots of handy tools in there.

http://www.amazon.com/Rosewill-Piece-Premium-Computer-RTK-045/dp/B0045KYOGM/ref=sr_1_1?ie=UTF8&qid=1451686156&sr=8-1&keywords=rosewill+tool+kit

Wallet ninja. I've given them to all my friends and they've all found them useful. Only a few quid/dollars

https://www.amazon.co.uk/gp/aw/d/B00JJVBGU4/ref=mp_s_a_1_4?ie=UTF8&qid=1499068667&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=wallet+ninja&dpPl=1&dpID=51xvOWWnXRL&ref=plSrch

In rough order, starting from the upper left corner:

• White bandana
  
• Car keys on a belt clip (includes Iris Smart Home fob)
  
• Generic leather-ish wallet from Target (?)
  
• Bic Mini disposable lighter
  
• Fox 40 class peals whistle
  
• Kel-Tec PF-9 in CrossBreed MiniTuck
  
• Pocket Ref 4th Edition
  
• Pepper spray
  
• Gerber Artifact
  
• TOMS Traveler Dalston sunglasses
  
• Gerber EAB
  
• iPhone 7 Plus in MoKo Slim clear case
  
• Apple Watch Series 1 38mm Space Gray w/ black sport band
  
• Streamlight MicroStream
  
• Smith’s Pocket Pal
  
• Extra magazine (Speer Gold Dot 124gr)
  
• Utilitech flashlight + laser pointer
  
• Black bandana
  
• Keys on a belt clip, including:
  
  • Swiss-Tech Utili-Key
    
  • Kingston DataTraveler SE9 32GB USB 3.0
    
• Leatherman Crunch
  
• Notepad
  
• Sharpie
  
• Pilot G-2 1.0mm
  
• Tungsten carbide wedding band
  
• Kershaw Freefall
  
  The wallet has enough stuff in it to do an entirely separate post.

I really like my Boker, but it needs a better bottle opener, one that can actually open bottles in one try. It's also way over $15...

Give a shot to the Victorinox SwissTool Spirit X multi-tool. The fit and finish is worlds away from Leathermans (Of which I own like six, too).

I carry something similar: Victorinox Swisstool Spirit X. Plier multi tools are awesome. Sometimes I would like the one handed knife opening of a Leatherman though, but the Spirit is so nice.

I have the Victorinox Swisstool Spirit X:

http://www.amazon.com/Victorinox-Swiss-Army-Swisstool-Spirit/dp/B0027MSC2M/ref=sr_1_5?s=sporting-goods&ie=UTF8&qid=1325214521&sr=1-5

After viewing many different options, I finally settled on this one mainly because of how the handle is curved. It's quite a bit more comfortable to hold than other brands that don't have a curved handle.

I've had it for probably 3-4 years now, use it everyday. It still looks brand new.

Get a multi-tool, small one like this is a good choice.

Awesome, I'm in!

This guy.

http://www.amazon.com/Leatherman-Black-Finish-Sheath-830246/dp/B0009JS2ZW/ref=sr_1_2?s=power-hand-tools&ie=UTF8&qid=1426709009&sr=1-2&keywords=leatherman+wave

best by 20 bucks from a quick few searches

Utility Key Tool

Reusable hand warmers

Pocket chainsaw

Credit Card Companion

Survival Grenade

Charge Key (Lightning)

Charge Key (Micro-USB)

Wallet Ninja

Card Sharp

Pocket Stash

I would suggest the Leatherman Wingman. I have it and it has worked out great. Only costs $35 so it doesn't break the bank.

Leatherman 831425 Wingman Multi-Tool https://www.amazon.com/dp/B0058EJ2MK/ref=cm_sw_r_cp_api_QuD7yb2840WKF

This is awesome, gotta get in on this https://www.amazon.com/Leatherman-Wingman/dp/B0058EJ2MK/?tag=parametrek-20

Here's a few things you didn't know you wanted:

Bug-a-Salt

Leatherman Wave

Shock Game

I have more if you want. Hope this helps.

If he likes the style of knife he already has you could share it and we can suggest upgrade. Without knowing that I have three suggestions that should cover most situations.

Esee Izula

Leatherman Wave

Benchmade 810 'Contego'

I've used all three on the daily at some point and have worked in both construction and utility industries

1. One thing
   
   
2. I want an early present!
   
   Try not to celebrate a little too much with liquid courage ;)

I use a Leatherman Squirt. I use in salt and fresh, a little CorrosionX once in a while and it looks like new. Got it used on ebay for cheap a bunch of years ago.

I have a nice small one that I love.

http://www.amazon.com/Gerber-31-001134-Dime-Micro-Tool/dp/B007BKL6G4/ref=pd_sim_sbs_hi_2/184-5712101-5997228?ie=UTF8&refRID=0CWW1T318D9BGVC3DX06

For opening boxes keys are fine for anything tougher I need a knife, the screw drivers are also handy and I use the little scissors a ton, mostly for cutting my nails. I need to get at my gas meter alot and I use the plyers to open the door of it. So it is a bit of weight on my keyring but I use it a lot.

Air $26.09 and Toolkit $19.99 both are on Miscellaneous wish list. Also something from her Little wishes list, Kitty Treats $2.99 add-on

https://www.amazon.com/Kikkerland-CD114-Beechwood-Multi-Stainless/dp/B01LYLV3DR/ref=sr_1_3?keywords=crab+multi+tool&qid=1562864759&s=gateway&sr=8-3 - I think I found it on Amazon if anyone else is curious!

The Victorinox CyberTool 34

I have a green one, if it had locking blades it would be perfect. There's a bigger one I think it's "41" and a smaller "29" that I know of. I've never seen them, I suspect from the pictures the 41 is too large and the 29 maybe not as useful.

The pliers may be a deal breaker if you're used to the leathermen.

Amazon

Op is far too generous.

Poor college student - Gerber MP600 Multi-Plier, Blunt Nose, Black [07520] https://www.amazon.com/dp/B001AC1C6I/ref=cm_sw_r_cp_api_EYvczbB213SZ1

Cheers mate

I love this thread if for no other reason than I get to see what multitools people choose! Here's mine:

Leatherman - Squirt PS4 Multi-Tool, Blue https://www.amazon.com/dp/B0032XZW9G/ref=cm_sw_r_cp_api_FruczbMXE50E3

http://www.amazon.com/Boker-Plus-Vox-Access-Tool/dp/B004OKCGGI/ref=sr_1_1?ie=UTF8&qid=1419920394&sr=8-1&keywords=titanium+boker

It's light and it's pretty much a multitool.

I have this one

http://www.amazon.com/Gerber-31-000750-Grylls-Compact-Multi-Tool/dp/B004DT2912

It's a really good tool for the price

So maybe something like this, or this perhaps.

Finding a waterproof multitool for that price is going to be difficult or even impossible, but regular maintenance would keep a normal multitool in good condition if that would suffice.

If you'd be willing to slightly stretch the budget, you could consider a Leatherman Wingman:

http://www.amazon.com/Leatherman-831425-Wingman-%C2%AE-Multi-Tool/dp/B0058EJ2MK

No, it's the Bear Grylls one. Cheesy, I know. But I love it.

http://www.amazon.com/Gerber-31-000750-Grylls-Compact-Multi-Tool/dp/B004DT2912/ref=sr_1_1?ie=UTF8&qid=1421767635&sr=8-1&keywords=small+gerber+multitool&pebp=1421767715166&peasin=B004DT2912

You could also add a wallet ninja inside :)

If you're looking for a utilitarian knife, I personally keep http://www.amazon.com/Victorinox-Swiss-CyberTool-Translucent-Pocket/dp/B0007QCP50/ref=sr_1_85?s=sporting-goods&ie=UTF8&qid=1330590433&sr=1-85 with me most of the time. Fits in the pocket nicely and comes in handy more often than you'd think.

Well, definitely yes in my opinion.

I find Switzerland a really "smart" country, which has no conflicts or strange interests.

Also they have this: https://www.amazon.com/Victorinox-Swiss-Army-Cybertool-Functions/dp/B0007QCP50/ref=sr_1_1?ie=UTF8&qid=1498483585&sr=8-1&keywords=victorinox+cybertool

P

I have one of these and it was a good purchase. https://www.amazon.com/dp/B0045KYOGM/

Awesome multitool Overall good reviews.

Can you tell me more about that legendary kit? Is it like that? https://www.amazon.com/Rosewill-RTK-045-Computer-Phillips-Screwdriver/dp/B0045KYOGM

are you aware of similar designs produced in titanium? like:
Schrade Titanium Pry Tool
ti edc pry?
Boker Plus Vox Access Tool

Perhaps a DataVac?(Note: It doesn't suck, it blows!)

Maybe a tool kit?

Wacom bamboo or similar?

Edit - Maybe something off Vat19?

I have a previous version of this http://www.amazon.com/Leatherman-831192-Squirt-Keychain-Plier/dp/B0032XZW9G/

It has made my life much easier on several occasions.

Whatever you do don't get this: http://www.amazon.com/Gerber-31-000750-Grylls-Compact-Multi-Tool/dp/B004DT2912

It broke the first time I tried to bend a wire with the pliers, lol. Was not expecting it to totally destroy itself in 30 seconds but, hey the gerber shard is really nice I carry it on my keys.

You can find it in Amazon. Also, if interested, here are few more designs

Squirt in blue, please! https://www.amazon.com/gp/aw/d/B0032Y4ITU/ref=psdcmw_553990_t3_B0032XZW82

This is really cool, count me in.
This

That one looks like a Victorinox Swiss Army CyberTool M.

https://www.amazon.com/Victorinox-Swiss-Army-Cybertool-Functions/dp/B0007QCP50

I was actually looking into buying a multi-tool too, like this. I probably wouldn't be hunting anything bigger than a fox. It's mainly going to be used for basic survival, and hunting being a by-product of that.

The Boker Plus Vox Access Tool looks to be about the only option that fully fits your request.

If it weren't for the pocket clip requirement, I'd say check out the [Burketek Pocket Wrench II Set](http://amazon.com/dp/product/B0089SI412/?tag=justanotrenob-20
) as well.

Everybody here fumbling with your fold out Leatherman tools. Clearly you haven't found the satisfying quick action of a Gerber multi-tool. I have two of these (blunt and needle nose) and have used them from focusing lights to fixing fence on my dads farm. When I come across someone with a Leatherman I just whip this out and they change their ways and don't look back.

Gerber MP600 Multi-Plier, Blunt Nose, Black [07520] https://www.amazon.com/dp/B001AC1C6I/ref=cm_sw_r_cp_api_5LDIxb0TPBFP2

https://www.amazon.com/Kikkerland-CD114-Beechwood-Multi-Stainless/dp/B01LYLV3DR/ref=asc_df_B01LYLV3DR/?tag=hyprod-20&linkCode=df0&hvadid=309869401414&hvpos=1o1&hvnetw=g&hvrand=6157411696910248007&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9073467&hvtargid=pla-406360519418&psc=1&tag=&ref=&adgrpid=63364097444&hvpone=&hvptwo=&hvadid=309869401414&hvpos=1o1&hvnetw=g&hvrand=6157411696910248007&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9073467&hvtargid=pla-406360519418

;)

Same exact knife without the SQ branding, $70 on Amazon.

Apparently Stattqualm thinks their logo is worth $40.

Spec-Ops Brand T.H.E. Wallet (Black) https://www.amazon.com/dp/B0029XC49Q/ref=cm_sw_r_awd_PEmOub0B93H45

Victorinox Swiss Army Swisstool Spirit X https://www.amazon.com/dp/B0027MSC2M/ref=cm_sw_r_awd_7FmOub0T67GKA

Leatherman 831925 Juice S2 Multitool https://www.amazon.com/dp/B00JJY4ZZO/ref=cm_sw_r_awd_KGmOub0ZWJAY5

JETBeam BC20 E XPG Cree LED Flashlight, Black https://www.amazon.com/dp/B005171U8S/ref=cm_sw_r_awd_vHmOub0206RKK

Vivis™ Knight V3 13000mAh Dual USB Portable Charger External ... http://www.amazon.com/dp/B00LJCI53M/ref=cm_sw_r_udp_awd_yUmOub0X1GG20

Nitecore Tube 45 Lumens Blue USB Rechargeable Key Chain Flashlight with Lumen Tactical Keychain Light https://www.amazon.com/dp/B00OY9TH16/ref=cm_sw_r_awd_sWmOub0CMG570

Rite in the Rain Tactical Notebook Tan 4 in x 6 in #946T https://www.amazon.com/dp/B000RF0SWI/ref=cm_sw_r_awd_MXmOub1BV5GBQ

Smith and Wesson SWPENMP2BL M and P 2nd Generation Tactical Pen, Blue https://www.amazon.com/dp/B007DCGT12/ref=cm_sw_r_awd_21mOub18DFKDV

Kershaw 3880 Thermite Folding Knife https://www.amazon.com/dp/B00BNPUX94/ref=cm_sw_r_awd_V2mOub0RFH0ZG


These are some of my items.

$16 fulfillment by Amazon, a little less by other sellers, depending on tax.
https://www.amazon.com/gp/offer-listing/B01LYLV3DR/ref=dp_olp_new_mbc?ie=UTF8&condition=new

In case you want to buy one. http://www.amazon.com/Wallet-Ninja-Multi-purpose-Credit-Pocket/dp/B00JJVBGU4/ref=sr_1_1?ie=UTF8&qid=1420231912&sr=8-1&keywords=Wallet+Ninja

All aboard the Squirt train. https://www.amazon.com/dp/B0032XZW9G/

Left to right


Muji Eraser


[Sigg 0.6L water bottle] (http://siggnorthamerica.com/shop/classic-traveller/0-6l-classic-traveller/)


[Muji Gel Pen] (https://www.muji.eu/pages/online.asp?Sec=13&Sub=52)


[Alvin DRAFT-TEC RETRAC 0.3mm] (https://www.amazon.com/Alvin-DR07-Draf-Tec-Retrac-Mechanical/dp/B001DKJ55C)


[Leatherman Style PS] (https://www.amazon.com/Leatherman-Style-PS-Multi-Tool-Black/dp/B0058RX9NU)


Chapfix+


Anker SoundBuds Sport IE 20


[Fisher Space Pen] (https://www.amazon.com/Fisher-400B-Space-Bullet-Pen/dp/B000WGD13U)


[Leatherman Wave Black] (https://www.amazon.com/Leatherman-Multi-Tool-Black-Molle-Sheath/dp/B0009JS2ZW)


[Mee Audio M6 Pro] (https://www.amazon.com/MEE-audio-Universal-Fit-Noise-Isolating-Detachable/dp/B015S2I6A0)


[Random Knife] (http://www.smorgasburg.com/)


[Corsair Voyager Go 32GB] (https://www.amazon.com/Corsair-Voyager-USB3-0-Android-devices/dp/B00HVT27CW)


[Kershaw Cryo 1555Ti] (https://www.amazon.com/Kershaw-1555TI-SpeedSafe-Folding-Knife/dp/B0074FI28Q)


[Alpine Swiss Slim Wallet] (https://www.amazon.com/Alpine-Swiss-Genuine-Leather-Pocket/dp/B00EOYKEEA)


[Anker PowerCore 10000 with Quick Charge 3.0] (https://www.anker.com/products/A1264011)


[Seiko SNDC31] (https://www.amazon.com/Seiko-SNDC31-Classic-Stainless-Chronograph/dp/B004JY0KP8)


[Lenovo T440s (256GB Samsung 840 EVO, 12GB ram, 1080p touchscreen, i5 4300)]
(http://shop.lenovo.com/us/en/laptops/thinkpad/t-series/t440s/)


[Motorola Doid Turbo Ballistic Nylon 32GB] (https://www.verizonwireless.com/smartphones/droid-turbo/)

https://www.amazon.com/dp/B01LYLV3DR/ref=cm_sw_r_cp_awdb_t1_8WLkDb4NJDCYZ

top-bottom, left-right:

Shinola Runwell 41mm

iPhone 5C

Secrid card wallet

Victorinox Cybertool 34

Withings Pulse O2

Keys to my 2004 Chrysler Sebring Convertible

Keysmart with USB

Op delivers: http://www.amazon.com/dp/B004OKCGGI/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8

Toy Helicopter: http://www.amazon.com/Syma-S109G-Apache-3-Channels-Helicopter/dp/B004L2J7W0/ref=sr_1_4?ie=UTF8&qid=1321531319&sr=8-4

Bear Grylls Compact Multitool: http://www.amazon.com/Gerber-31-000750-Grylls-Compact-Multi-Tool/dp/B004DT2912/ref=sr_1_5?ie=UTF8&qid=1321531379&sr=8-5

Tim Tams: http://www.amazon.com/6-pack-Tim-Tam-Original/dp/B0030GT1BU/ref=sr_1_3?ie=UTF8&qid=1321531487&sr=8-3

Coby MP3 Player: http://www.amazon.com/Coby-Video-Player-Radio-Black/dp/B0035P4C06/ref=sr_1_1?ie=UTF8&qid=1321531545&sr=8-1

Story Cubes: http://www.amazon.com/Gamewright-318-Rorys-Story-Cubes/dp/B003EIK136/ref=sr_1_14?ie=UTF8&qid=1321531575&sr=8-14

Leatherman Crunch locking plier multitool FTW.

The victorinox cyber tool m meets all your requirements.

https://www.amazon.com/Victorinox-Swiss-Army-Cybertool-Functions/dp/B0007QCP50

I always have a Leatherman Multitool and a flashlight.

Gerber Bear Grylls compact multi-tool

I always have a multitool on me: https://www.amazon.com/Leatherman-Multitool-Stainless-Leather-Sheath/dp/B000JCN6C8

For the lazy

• Glock Perfection
  
• Leatherman Charge ALX
  
• Leatherman Crunch
  
• Spare bits for the leathermen
  
  My belt gets crowded.

Leatherman Super Tool or Squirt ES4?

Our 371-M notebook is a bit more compact and thin than Field Notes, Word, and Moleskine notebooks. Our paper is also waterproof, so there's that. On the pen front, you can't get much more compact than either our Trekker Space Pen or our Bullet Space Pen.

The Gerber Dime is a tiny little guy; it's been decent in my experience. I also keep a Coast G19 flashlight in my bag.

http://www.amazon.com/Boker-Plus-Vox-Access-Tool/dp/B004OKCGGI/ref=sr_1_4?ie=UTF8&qid=1413219427&sr=8-4&keywords=mini+pry+bar

From left to right:

​

JLab Audio JBuds Air

Microtech Ultratech D/E Tactical

Spyderco Karahawk

Olight M1X Striker

Iphone 7

Wallet Ninja

Apple Watch 42mm

Kenneth Cole REACTION

Yookay Titanium Belt Key Chain Clip

resqme

Keybar - Carbon Fiber/Titanium

SOG Key Folding Knife

EDC Belt Sleeve

Fisher Space Pen

Evutec Karbon Case

​

What about this? https://www.amazon.com/Wallet-Ninja-Multi-purpose-Credit-Pocket/dp/B00JJVBGU4/ref=pd_bxgy_468_img_2?_encoding=UTF8&pd_rd_i=B00JJVBGU4&pd_rd_r=39a8408c-268e-11e9-898b-bde429f25e46&pd_rd_w=52HOA&pd_rd_wg=jPort&pf_rd_p=3f9889ac-6c45-46e8-b515-3af650557207&pf_rd_r=0QE6TT4W7FQKXSFDWGFX&psc=1&refRID=0QE6TT4W7FQKXSFDWGFX

I don't think there's a blade of any type on it.

I'm in.

Let's try this one!

A pair of wire clippers and a Leatherman.

With the exception of occasionally needing a carpenters pencil i can't imagine ever needing anything else.

Gerber Dime. Fits right in the fifth pocket Gerber 31-001134 Dime Micro Tool https://www.amazon.com/dp/B007BKL6G4/ref=cm_sw_r_cp_apa_-9DSzbA9HWDAD

Leatherman Wave

I would think a Leatherman.

Buy one here: www.amazon.com/dp/B0002H49BC

Black Oxide version here: www.amazon.com/dp/B0009JS2ZW

Leatherman Wave Multitool

Nexus 6P

LG G Watch R

Supcase for Nexus 6P

http://www.amazon.com/Leatherman-Black-Finish-Sheath-830246/dp/B0009JS2ZW

Bring up the budget to $50 and you'll get everything you'll ever need:

• Gerber Dime
  
• Fenix E05
  
• Cruzer Fit
  
  

It's $15 for one. You can find it here.

This was actually harder than I expected, I didn't realize how much money I have into my own edc.
Here we go:

Knife: spyderco dragonfly (orange wouldn't be my first choice but it was the cheapest one) www.amazon.com/dp/B00DJTV3M8/ref=cm_sw_r_cp_apa_Y-YjybB1XXXQD

Flashlight: ThruNite Ti3
www.amazon.com/dp/B01FCTD9PG/ref=cm_sw_r_cp_apa_e8YjybEN4FSTE

Multi-tool: gerber compact multi tool
www.amazon.com/dp/B004DT2912/ref=cm_sw_r_cp_apa_FcZjybMYDSGAR

Wallet: simpac minimalist wallet
www.amazon.com/dp/B01L3OAXGM/ref=cm_sw_r_cp_apa_PeZjybNM360Q2

Pen: zebra F-701
www.amazon.com/dp/B010BZXZHS/ref=cm_sw_r_cp_apa_B.YjybF5QC4B4

Comes out to $98.99

I have one of these multi-tools, and it's come in handy lots of times. Tiny, cheap, and very feature-packed.

A small Multitool, check these out.

Leatherman PS4 Squirt <-- I have one of these, it's about the same size than a tube of chapstick.

Leatherman S2 Juice

IMO every EE needs a Leatherman Squirt ES4; It's very compact and has pliers with wire-strippers on it.

LEATHERMAN - Crunch Multitool with Folding Locking Pliers and Pin Vice, Stainless Steel with Leather Sheath https://www.amazon.com/dp/B0007UQ1EC/ref=cm_sw_r_cp_api_i_UbaQCb8GYH1HZ

Check out the leatherman crunch

http://www.amazon.com/Leatherman-68010101K-Crunch-Multi-Tool-Leather/dp/B0007UQ1EC

Boker Vox Plus titanium pry bar. http://www.amazon.com/gp/aw/d/B004OKCGGI

For those interested

http://www.amazon.com/Boker-Plus-Vox-Access-Tool/dp/B004OKCGGI

... I don't have one, haven't used one, am not convinced a specialized glass breaker is necessary/useful. But there you go.

Shades: J+S Classic Aviators https://www.amazon.com/gp/product/B014LAY3KC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Multi-Tool: Leatherman Wave https://www.amazon.com/Leatherman-Multi-Tool-Black-Molle-Sheath/dp/B0009JS2ZW/ref=sr_1_2?ie=UTF8&qid=1486417540&sr=8-2&keywords=leatherman+wave

Wallet: I've been looking for a new one, this one is way too big and actually hurts to wear when I drive https://www.amazon.com/OURBAG-Cartoon-Wallet-Cosplay-Yellow/dp/B01KX5C3YC/ref=sr_1_11?ie=UTF8&qid=1486417385&sr=8-11&keywords=fairy+tail+wallet

Lanyard: Bethesda branded Fallout swag I picked up at Emerald City Comic Con but you can get one on amazon https://www.amazon.com/Official-Bethesda-Fallout-Vault-Lanyard/dp/B018MOU0TG

I keep this thing (https://www.amazon.com/Wallet-Ninja-Multi-purpose-Credit-Pocket/dp/B00JJVBGU4/ref=pd_lpo_vtph_468_bs_img_1?_encoding=UTF8&psc=1&refRID=56SVHHGQFSDCSTJ4Z0ER) in my wallet and use it to cut open packages before I buy anything taped up.

If someone who wasn't involved in theater bought ME gaff tape for xmas, I would remember it for a long time to come. Remember, it's the thought that counts.

If you're looking for something that's not an awesome consumable, you could try an aluminum scale ruler, tactical flashlight (must be black!), or a Gerber.

I'm just going to throw out a list or two here and you can skim it:

• Full socket wrench set
  
• PC tools (whether you're into pc repairs or not, they offer many nifty little tools you often use elsewhere)
  
• Drill'n'bits
  
• Long screwdriver (flat head/Phillips)
  
• A fucking magnitizer/demagnitizer (you'll wonder how you lived without one)
  
• Hammer / nails
  
  
  Not needed, but fun as hell:
  
  
• Wattage meter for outlets (only need one) "What the hell is causing this high electric bill?"
  
• Infrared thermometer "I bet that frying pan is cool by now..."
  
  Oh edit - not tools, but useful in said tool kit:
  
  
• Many types of tape electrical, two sided, painters, etc
  
• Super glue
  
• Batteries (at least AA, AAA - you'll thank me when the power is out next)
  
• A good flashlight (or 3)
  
• An LED work light bar thing
  
• A head lamp

I was thinking of that but it was too bulky. So I went with this its also a pry bar but at the end its a window punch

I carry a small knife on my keys too but it won't be as efficient at cutting a seatbelt

Just for the hell of it I tracked it down for ya. Actually has good reviews. And the company has other animal based tools.

Kikkerland Crab Multi Tool https://www.amazon.com/dp/B01LYLV3DR/ref=cm_sw_r_cp_api_i_J95jDb9HFQ06R

Top to bottom, left to right

1. Auckey Portable Charger
   
   
2. Casio GWM5610
   
3. RF Probie
   
4. Camelbak Mule NV (old style, no link)
   
5. Amazon Basics 6ft Charging Cable
   
6. Sharpie
   
7. Pilot G2 Pens
   
8. Keybar and Squirtle from this keychain
   
9. Kershaw Shuffle
   
10. RF Sergeant
    
11. Leatherman Wave
    
12. Rite in the Rain Stapled Notebook
    
13. Fisher Space Pen
    
14. Philips Screw Driver
    
15. Allen Wrench Set
    
16. 12' Tape Measure

+1
Mine actually broke while squeezing them (I was doubling a paperclip over).
I've been carrying the Gerber BG compact multitool ever since and while heavier, it is much more durable.

https://www.amazon.com/Gerber-MP600-Multi-Plier-Blunt-07520/dp/B001AC1C6I

i owned a leatherman, it broke. this one didn´t.

I always carry a knife, and have several to choose from. Today is the Kershaw, but when I'm camping I usually carry my Leatherman because I might need to do more than cut my bagel.

you can get a Klein DMM for $40. https://www.amazon.com/dp/B00J9Q5FCE/

I avoid the cheap no-name stuff. Recently bought some disco-cheap small screwdriver set from Summit Racing and they were so bad that one of the tips had a 90 turn on the end from bad machining and lack of quality control. I told 'em, too, that selling cheap tools is dangerous, but they'll keep doing it because they can buy them for a penny and sell them for a dollar.

No problem!

I'm in the same boat man. I've been fucked by the DMV for 2 years now so I still don't have a license, and I'm 20. I'm pretty jealous of people that have the coordination to play instruments!

I understand the money struggle as well. I live on a dead-end island where all jobs are seasonal, so during winter jobs are scarce.

If you are scared about frying parts, you may want to look into getting an ESD mat, an ESD wrist strap, and a proper PC repair toolkit. Just some things every PC builder/user should have in their arsenal. Just follow proper procedure and ground/discharge yourself before working on parts and you'll be fine.