Reddit mentions: The best pipe insulation products
We found 25 Reddit comments discussing the best pipe insulation products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 14 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. 2" x 6 ft. Polyethylene Pipe Insulation, 1/2" Wall
- NO TOOLS REQUIRED: Push-to-connect 1/4- by 1/4-inch straight shutoff valve provides a simple, quick, reliable, leak-free connection with no tools required
- CONSTRUCTION: Plumbing fitting made from white propylene with EPDM O-rings; for use with plastic pipe or soft copper tubing
- DURABILITY: Lead-free, corrosion-free, non-toxic, and more chemically resistant than other plastics
- SAFE: compliant material; NSF 61 and 51 certified
- PERFORMANCE: Rated to 150 psi at 70 degrees Fahrenheit and 60 psi at 140 degrees Fahrenheit
Features:
Specs:
Height | 3 Inches |
Length | 72 Inches |
Weight | 1 Pounds |
Width | 3 Inches |
2. Rubber Sheets, Black, (Pack of 3) 6x6-Inch by 1/8 (+/-10%) Duro A60. Neoprene, Plumbing, Gaskets DIY Material, Supports, Leveling, Sealing, Bumpers, Protection, Abrasion, Flooring
★ 3 RUBBER SHEETS - Includes 3 black sheets of rubber 6 in x 6 in by 1/8 in.★ DO IT YOURSELF (DIY) MATERIAL - This product is great for your home and workplace projects. Cut it easily with a knife or scissors.★ HEAVY DUTY/HIGH-QUALITY RUBBER MATERIAL - This rubber was dried using a special pro...
Specs:
Color | Black |
Height | 6 Inches |
Length | 6 Inches |
Size | Black 1/8-inch Thick |
Weight | 0.21 Pounds |
Width | 0.13 Inches |
3. roVa Flex Aerogel Insulation Tape
- 1 COUNT - Includes 1-count of white insulation tape, measuring 9.8" x 9.8" (25cm x 25cm) and a thickness of 0.04” (1mm)
- DIY FRIENDLY - Highly flexible and soft for easy cutting and form fitting. Slightly sticky to help self-attach to most surfaces.
- HOT/COLD INSULATION - Insulates against both hot and cold conditions. Operating temperature range from -58F to +248F (-50C to +120C)
- ADDITIONAL FEATURES - Protects agains water and moisture, especially from condensation. Dampens sound and vibration by absorbing energy
- ALSO AVAILABLE in 10-count boxes in 4 sizes: 2” x 19.7” strips, 3.9” x 19.7" strips, 9.8” x 9.8” square sheets, and 19.7” x 19.7” square sheets. ALSO AVAILABLE in Sticker Type, with adhesive backing.
Features:
Specs:
Height | 0.0393700787 Inches |
Length | 9.842519675 Inches |
Weight | 0.11 Pounds |
Width | 9.842519675 Inches |
4. Reflectix SPW0402512 4-Inch by 25-Feet Spiral Pipe Wrap
Simply wraps around your pipes or duct work overlapping approximately 1/2-Inch as you goSecure with refectix reflective foil tape (4280-3007) around each end of your wrapped productProvides an air space between the pipe and the wrap that will aid the insulation value4-Inch by 25-Feet rollR-4 Rating ...
Specs:
Height | 12.5 Inches |
Length | 1.87 Inches |
Number of items | 1 |
Weight | 0.5 Pounds |
Width | 21.75 Inches |
5. M-D Building Products 50144 M-D Weather Stripping Tube Insulation, 1 in Pipe, 3 Ft L X 3/8 in T, Polyethylene Foam, Black, pack of 4
Blocks heat loss or gain to save energyUse on hot or cold pipesStops condensation on cold pipes to prevent water damageCountry of Origin: CHINA
Specs:
Color | Black |
Height | 38 Inches |
Length | 17 Inches |
Number of items | 1 |
Weight | 0.2 Pounds |
Width | 15.25 Inches |
6. M-D Building Products 50150 Pipe Insulation & Tape, Black, 50
- Blocks heat loss or gain to save energy
- Use on hot or cold pipes
- Stops condensation on cold pipes to prevent water damage
- Easy to install. Tube Pipe Insulation- 3/8 inch Wall - 3/4 inch x 6 feet
- Simple, easy way to save energy costs
Features:
Specs:
Color | Black |
Height | 1.75 Inches |
Length | 72 Inches |
Number of items | 1 |
Weight | 0.1 Pounds |
Width | 1.75 Inches |
7. M-D Building Products 50164 1-Inch by 6-Feet Self-Sealing Tube Pipe Insulation, Black
- Prevent heat loss or gain to save energy
- Use on hot or cold pipes
- Stop condensation on cold pipes
- Easy to install with pre-cut, self-sealing slits
- Black finish
Features:
Specs:
Color | Black |
Height | 2 Inches |
Length | 72 Inches |
Number of items | 1 |
Weight | 0.13 Pounds |
Width | 2 Inches |
8. Insulation, Wool, 0 to 1200 Degrees F
- Moisture Absorption: No, Approx. R Value: 4, Length: 48 in
Features:
Specs:
Height | 1 Inches |
Length | 48 Inches |
Number of items | 1 |
Weight | 6 Pounds |
Width | 24 Inches |
9. Frost King S11xb-6 Self-Sealing Pre-Slit Pipe Insulation, 3/8" Thick For 3/4" Copper - Lot of 50
- Size: 6'
- Self sealing
- 3/8" wall thickness
- For use on 3/4" copper pipe or 1/2" iron pipe
- Insulating tube made of closed cell polyethylene foam or rubber
Features:
Specs:
Color | Brown |
Height | 72 Inches |
Length | 2 Inches |
Number of items | 1 |
Size | 3/4" x 3/8" x 6' |
Weight | 0.38 Pounds |
Width | 2 Inches |
10. Rubber Sheets, Black, 6x6-Inch by 1/16 (Pack of 3) Neoprene, Plumbing, Gaskets DIY Material, Supports, Leveling, Sealing, Bumpers, Protection, Abrasion, Flooring
★ 3 RUBBER SHEETS - Includes 3 black sheets of rubber 6 in x 6 in by 1/16 in.★ DO IT YOURSELF (DIY) MATERIAL - This product is great for your home and workplace projects. Cut it easily with a knife or scissors.★ HEAVY DUTY/HIGH-QUALITY RUBBER MATERIAL - This rubber was dried using a special pr...
Specs:
Color | Black - Commercial Rubber |
Height | 6 Inches |
Length | 6 Inches |
Weight | 0.13 Pounds |
Width | 0.18 Inches |
11. Itp Pipe Insulation 3/4 " Nom. Id. Iron Pvc : 3/8 " Id.
- Fits 3/4" copper pipe or 1/2" iron pipe
- Maximum Pipe Size: 3/4 in.
- Material: Polythelene Foam
- Wall thickness 3/8"
- R Value: 2.187
Features:
Specs:
Height | 1.8 Inches |
Length | 3.8 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.1 Pounds |
Width | 4.8 Inches |
12. Frost King Pre-Slit, Tubular Polyethylene Foam Pipe Insulation, 3/8" Thick Wall, 3-Feet
- 3/8in thick wall, bulk 3Ft lengths
- 4 pack - 3Ft closed cell polyethylene foam, pre-slit
- Fits 1in Copper or 3/4in iron pipes
- Prevents pipes from sweating and dripping
- R-value 2.1
- 3-Feet Black Tubular Polyethylene Foam Pipe Insulation
- Helps To Prevent Pipes From Freezing Or Sweating
- Comes Pre-slit, With Heavy-duty 3/8-Inch Wall Thickness
- For Use On 1-Inch Copper Pipe, Or 3/4-Inch Iron Pipe
- Comes With 4 To A Pack
Features:
Specs:
Height | 36 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | For 1" Copper or 3/4" Iron Pipes |
Weight | 0.03 Pounds |
Width | 9 Inches |
13. 1 1/2" ID Insulation Pipe, 3/4" Thickness Nitrile Rubber Insulation Fire/Water Resistant AC Foam Pipe Cover
- Product Name: Closed cell NBR foam Insulation Pipe
- Size: 1-1/2"(I.D.) x 3/4"(Thinkness) x 6ft(Length)
- Eco-friendly: Our insulation pipe is mainly made of high quality rubber plastic, it is eco-friendly, harmless to human body and environment.
- Applications: Enables the plumber & HVAC/R technician to create precision bends up to 90 Degree of soft copper and aluminum tubing; also can be used as multi-purposes.
- EASY TO USE: It is convenient to install due to it is not need to install other auxiliary layer and it is just cutting and conglutinating. It will save the manual work greatly. Besides, we will offer a 12-month worry free warranty and easy to reach friendly customer service
Features:
Specs:
Size | 1-1/2"(I.D.) x 3/4"(Thickness) |
14. M-D Building Products 50142 M-D Weather Stripping Tube Insulation, 3/4 in Pipe, 3 Ft L X 3/8 in T, Polyethylene Foam, Black, 4 - Pack
- Blocks heat loss or gain to save energy
- Use on hot or cold pipes
- Stops condensation on cold pipes to prevent water damage
- Country of Origin: CHINA
Features:
Specs:
Color | Black |
Height | 15.25 Inches |
Length | 38 Inches |
Number of items | 1 |
Size | Pack of 4 |
Weight | 0.27 Pounds |
Width | 17 Inches |
🎓 Reddit experts on pipe insulation products
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where pipe insulation products are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I have the enclosed one, and it is definitely pretty ping-y out of the box (I noticed it even with tactile switches). It's pretty easy to fix, though, by gluing some dense foam rubber to the inside of the bottom. Worked like a charm, and added some nice heft to the board (though the enclosed steel case is definitely heavy enough on its own).
Though I did buy mine before they were making the aluminum ones... if I was going to do it again I would probably go with one of those.
I bought some black rubber sheets from Amazon, something like this https://www.amazon.com/6x6-Inch-Neoprene-Plumbing-Material-Protection/dp/B018H9CCPG/ref=sr_1_2?ie=UTF8&qid=1482726076&sr=8-2&keywords=black+rubber+sheet.
Cut the sheets down via exacto knife or box cutter. Two strips of 5mm x ~8.0 or ~8.5cm(this part can be adjusted).
I used Gorilla glue to glue them down, specifically the gel kind. I started near the top and then worked my down towards the curved edges on the bottom.
The end result looks like this: http://imgur.com/a/PSneJ
I loved the grip prior to doing this but the wobble drove me crazy, hope this helps. You can find the sheets in stores like Home Depot as well in the plumbing section but may not be black or as cheap.
> Ahh okay yes that makes sense, what do you usually use for insulation?
Foam pipe insulation works well, or a few wraps with Reflectix works well. Reflectix also looks really nice, taped up with foil HVAC tape.
Here's my best suggestion: Take your passenger seat out, run it in through the trunk tail first. A 3 definitely has the interior length to do it, and since you're going alone you don't need the passengers seat.
As for scratching it with straps: Buy some pipe insulation. It's closed-cell foam tubing that can wrap around the straps and deform around the car. Use it under the board and on the straps where they contact the body panels. This will work great if you're only doing a week, but is in no way a long term solution. Amazon: https://www.amazon.com/ft-Polyethylene-Pipe-Insulation-Wall/dp/B007R7VNAA
Again thanks for the reply. The "medical device" label does complicate things for sure.
I just bought some aerogel tape to test out. My idea is rings of tape starting halfway up and getting closer together the closer it gets to the end of the hose.
roVa Flex Aerogel Insulation Tape https://www.amazon.com/dp/B078SQVXSD/ref=cm_sw_r_cp_apa_i_0trVCbMAB4ENE
Hey sorry for asking this here instead of in a new thread, but for reflectix, do you know if there's any smaller option to buy? I'd like to insulate the back and sides of my 30 gallon, but ass the rolls I'm seeing are like 25 feet.
I did see this reflectix tape stuff, but would that work as well considering I'd have to overlap?
Bought a swagman xtc rack when I bought my hitch from etrailer a few months ago. They're around ~$215 or you can get the cheaper swagman xc for ~$100 (same thing, but xtc is the update with nicer platforms). They both had around 1000 reviews at 4.5 stars and I've had no problems with mine.
I bought curt's bike rack support strap and it made the rack solid with no worries about wobbling. Just took it on a 5hr road trip with 2 road bikes driving at ~80mph. I could do 85-90 but it would wobble a little so I stuck around 80.
To combat the scratching the frame problem I bought pipe insulation (aka pool noodles) for $5 and put them on over the top tubes so no worries about the rack scratching anything.
Just be aware that the rack can only fit tires <= 2.5inch or else you need to buy the wider platforms from amazon which are like $15 for a pair or something if you have a fat bike.
I made my canoe roof ready ( and much quieter in the water when I rest my kayak paddle) by gluing Pipe foam insulation from the hardware store onto the length of the canoes rim. It usually needs replacement once a year.
Another thing i did to facilitate tying the canoe to the car was to install small wire loops on the structural beams of the underside of my Hyundai front and back. I had fixed length ropes on the rear of the canoe with large clips on them that would clip to those loops, leaving only two tie downs with truckers knots on the front. I also usually used two ratchet straps through the open rear doors at the mdsection of the canoe also. ( don't cinch them too tight!)
Sure.
Step 1
Step 2
It looks like pipe insulation. You can repair or replace it.
In is either one of these two.
Pipe Insulation Inexpensive
Pipe Insulation - a little more money
Took me forever to figure this out. It’s not easy finding parts for the little three inch pipe. I ended up using the transition plate listed below with high temp insulation between it and the roof. Then on the roof I installed one of these high temp silicon rain guards. Also, if you are looking for a chimney cap Home Depot sells a cheap one that was recommended to us by cubic mini. We painted the stove pipe and chimney cap black using high temp paint.
176203 3" Ceiling Support/ Firestop-... https://www.amazon.com/dp/B002NHWAQK?ref=yo_pop_ma_swf
Insulation, Wool, 0 to 1200 Degrees F https://www.amazon.com/dp/B01LZI4T1U?ref=yo_pop_ma_swf
3 Silicone Hi-Temp Pipe Flashing... https://www.amazon.com/dp/B0792PT94W?ref=yo_pop_ma_swf
https://www.homedepot.com/p/100396919
VHT SP102 FlameProof Coating Flat... https://www.amazon.com/dp/B000CPJLGM?ref=yo_pop_ma_swf
I found a similar product on Amazon and it states that the foam is made of polyethylene.
Here is the link: https://www.amazon.com/Foam-Pipe-Insulation-Pack-50/dp/B001AU09VO
I have that same one (or one that looks just like it) that we used last winter (I didn't see any warning about using it on hoses on mine).
I didn't have any issues with it, but it was only below freezing a dozen or so nights (maybe 8 that were in the teens), and rarely below 30 once the sun was up.
I taped it to the hose every couple of feet with duct tape, and then put [pipe insulation] (http://www.amazon.com/M-D-Building-Products-50150-Insulation/dp/B002JFWDU4/ref=sr_1_1?ie=UTF8&amp;qid=1448941843&amp;sr=8-1&amp;keywords=foam+pipe+insulation) over the hose and the tape.
They have a thermostat on them so that they only turn on under a certain temp (40 IIRC), so it's possible that the hose didn't spend much time that low (due to the insulation).
2 inch pipe insulation exists: http://www.amazon.com/Pipe-Insulation-Semi-Slit-In-Ft/dp/B007R7VNAA
Might I suggest using PVC pipe foam to cover that. https://www.amazon.com/ft-Polyethylene-Pipe-Insulation-Wall/dp/B007R7VNAA?th=1&amp;psc=1
I use these https://www.amazon.com/ft-Polyethylene-Pipe-Insulation-Wall/dp/B007R7VNAA
Amazon
I also attached the probe to the side of the carboy insulated from the air temp using this:
http://www.amazon.com/Itp-Self-Seal-Pipe-Insulation-Tee/dp/B00100230E/ref=sr_1_fkmr0_2?ie=UTF8&amp;qid=1394751000&amp;sr=8-2-fkmr0&amp;keywords=tubular+pipe+insulation+tee
I've heard John Palmer say that his tests showed that the difference in temperature between the surface of the vessel and the center of the wort is less than 1 degree.
Here's an example. They come in various sizes. They have a split along the length so they can be opened up and flattened out, as seen in the costume.
It's literally raw balsa wood.
https://www.amazon.com/6x6-Inch-Neoprene-Plumbing-Material-Protection/dp/B018H9CCPG/ref=pd_sbs_60_1?_encoding=UTF8&amp;pd_rd_i=B018H9CCPG&amp;pd_rd_r=457NFRVKE0ZY1WA2ZHW5&amp;pd_rd_w=ehRBM&amp;pd_rd_wg=UNP8G&amp;psc=1&amp;refRID=457NFRVKE0ZY1WA2ZHW5&amp;dpID=316g3BYm-AL&amp;preST=_SX300_QL70_&amp;dpSrc=detail
That's the rubber sheets I use. I cut it into little pads that rest along the lid. It's really nothing fancy and looks pretty ratchet. I would post pics but I am out of the country for a few months.
The reason I use balsa wood is it's light and cheap. I used to use sheets but I didn't like the weight they put on knobs, sliders, etc.
Hardware stores sell a close cell foam that's gray for insulating pipes to reduce temperature swings or prevent the from freezing.
Search "Gray water line insulation" https://www.amazon.com/Insulation-Thickness-Nitrile-Rubber-Resistant/dp/B07MTJ9R8Y
boy that's really something. these are the same type of "kits" you'd find at a local hardware store. i just ordered a kit with m3-m4-m5 nuts bolts and washers, then another kit with m3-m4-m5 hammer nuts! plus, i got some rubber sheets in case i want to use them to cut to size for things like the stock part cooling fan, the y-axis brace where it touches the frame, and even the new squash ball feet i just mounted this morning! i'm not sure if the lengths all match up to what i want, but i suppose i could just find some longer/shorter if need be.
https://www.amazon.com/gp/product/B018H9CCPG
https://www.amazon.com/gp/product/B0799KSXN9
https://www.amazon.com/gp/product/B077Z94V83
im in the process of deciding how i want to attach this to mine!
also going to go find something like this in a store to split open and put around the edges that make contact with my face to soften that up a bit. Also I am going to find a sheet of foam that i can cut down to size and put right where your forehead hits the cardboard. down
You can try to cut some rubber pieces to place between the bracket and case to provide vibration isolation. Pretty cheap to get a small sheet on amazon and give a try.