(Part 2) Reddit mentions: The best safety apparel
We found 264 Reddit comments discussing the best safety apparel. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 125 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Makita DFJ304ZL 18V LXT Lithium-Ion Cordless Cotton Fan Jacket, Jacket Only (L)
3 air flow modes (high/ medium/ low) with L.E.D. Indicators Plus turbo mode for optimum air circulation and effective coolingUp to 15 hours of run time on high setting with 18V LXT 5.0Ah battery (battery sold separately)Features 5 pockets: (2) zippered chest pockets, side pockets (left and right) an...
Specs:
Color | Blue |
Height | 9.5 Inches |
Length | 4 Inches |
Number of items | 1 |
Size | Large |
Weight | 2.65 Pounds |
Width | 12 Inches |
22. Travelwey Safety Gear Reflective Vest High Visibility Day and Night, Large
HIGHLY REFLECTIVE - The Travelwey Running Vest offers 360 degree visibility to keep you safe and protected from motorists both during the day and at night.COMFORTABLE AND LIGHTWEIGHT - The safety vest weighs next to nothing and offers full range of motion in your arms and shoulders. You will even fo...
Specs:
Color | Yellow, Silver |
Size | Large-X-Large |
23. KwikSafety GODFATHER | Class 2 Safety Vest | 360° Hi Viz Reflective ANSI Compliant Work Wear | 9 Pockets Cushion Collar Reinforced Branding | Men & Women Regular to Oversized Fit | Yellow L/XL
PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance; that is why we make a size chart available (located in on images) to ensure that our customers find the right size for them. Size charts are available in both inches and centimeters measurements to maximize accuracy. We...
24. 3A Safety SME-AT1901-XL ANSI Certified Performance Crew Neck T-Shirt, Lime, X-Large
100% ANSI micro mesh polyester materialANSI specification fabric enhances daytime visibilityComfortable and durableMachine washable up to 51 times without fading meets ANSI standardsHi-vis lime green
Specs:
Color | Lime |
Number of items | 1 |
Size | X-Large |
25. National Safety Apparel C04KDQT03XL49 ArcGuard Arc Flash Long Coat Made from DuPont Kevlar/Nomex/Para-Aramid, 49", X-Large, Carmel Brown
49" ArcGuard Arc Flash Long CoatMade from Multi-Layer DuPont Kevlar/Nomex/Para-AramidFR hook & loop closure, FR knit wrists, stand up collar, generous cut for ease of movement(Arc Rating=65 cal/cm²) HRC 4NFPA 70E Compliant; Meets OSHA 1910.269
Specs:
Color | Carmel Brown |
Number of items | 1 |
Release date | March 2017 |
Size | X-Large |
Weight | 2.6 Pounds |
26. GripGlo TLS-432 Reflective Safety Vest | Front Zipper, 6 Multi-Functional Pockets | Bright Neon, 2” Reflective Strips, Orange Trim Maximum High Visibility | Meets ANSI/ISEA 107-2010–Level 2 | Large
- HIGH VISIBILITY: This safety vest is lightweight and designed for high visibility to keep you safe for Motorcycle, Running/Jogging, Bike/Bicycle Riding, Construction worker, Surveyor, Traffic Crossing Guard, Police, EMS, Security, - Essential for Your Car/Auto Rescue & RV Roadside Emergency Kit.
- ADDITIONAL SAFETY AND MAXIMUM VISIBILITY FEATURES: This safety vest is uniquely designed with double horizontal reflective strips on front and back of vest and specially designed orange trim edging on reflective material which substantially increases day & night visibility.
- ZIPPER CLOSURE AND MULTIPLE POCKETS: Premium Zipper Front Closure, 6 Multi-Functional pockets with Velcro closure - 1 upper split pen/pencil, 1 upper radio/phone, 2 lower flaps covered, 2 large inside lower pockets with Velcro closure.
- HEAVY DUTY MATERIALS: GripGlo High Visibility Vest is made of 100% polyester fabric and Hi-Vis reflective material. Durable, Lightweight, Breathable, Bright, Comfortable and Machine Washable. This premium quality vest is great for everyday use.
- FULL COMPLIANCE WITH ANSI/ISEA 107-2010 CLASS 2/LEVEL 2 – GripGlo High Visibility Safety Vest meets the ANSI and ISEA standards that outline performance specifications for maximum visibility and safety. Perfect for users who value high quality and utmost safety.
Features:
Specs:
Color | Yellow |
Size | Large |
27. Reflective Vest for Running or Cycling (Women and Men, with Pocket, Gear for Jogging, Biking, Motorcycle, Walking)(Medium)
<p>✅ Keep your electronic gadgets safe in the inside zippered pocket</p><p>✅ NOW AVAILABLE IN 3 SIZES for all runners, joggers, athletes, kids and adults</p><p>✅ You can customize the fit and size of the vest with the adjustable side closures</p><p>✅ The vest is made of 100% knitted polyeste...
Specs:
Color | Yellow |
Number of items | 1 |
Size | Medium |
Weight | 0.15 Pounds |
28. OccuNomix Medium Hi-Viz Yellow and Navy Blue 30" 150D Oxford with PU Coating Jacket
RainwearManufacturer: OccunomixMade in: United States
Specs:
Color | Yellow |
Height | 0.39370078740157 Inches |
Length | 21.259842519685 Inches |
Number of items | 1 |
Size | Medium |
Weight | 1 Pounds |
Width | 14.173228346457 Inches |
29. High Visibility Class II Safety Vest Lime Yellow (Extra Large)
Specs:
Color | Yellow,Lime |
30. G & F Products Leather Welding Apron Heat Flame Resistant Heavy Duty Work Apron with 2 Pockets, 36" Long with back adjustable back and neck straps for Men & Women, color Brown, 24"Width x 36"Long (9100-36)
Heat resistant leather protects against spark and offers extended wear2 pocket design allows to put any handy tools with the apronMeasures 24" Width by 36" Lengthmade of premium cowhide leather for max endurance and wear and tear
Specs:
Color | Yellow |
Height | 2 Inches |
Length | 18 Inches |
Number of items | 1 |
Size | 24"Width x 36"Long |
Weight | 0.5 Pounds |
Width | 24 Inches |
31. Ergodyne 2X Lime Chill-Its 6685 Polyester Evaporative Cooling Vest
BandanasManufacturer: ErgodyneMade in: United States
Specs:
Color | Xx-large |
Height | 15 Inches |
Length | 13 Inches |
Number of items | 1 |
Size | XX-Large |
Weight | 0.62 Pounds |
Width | 1.5 Inches |
32. HyperKewl 6529-KH-XL Evaporative Cooling Vest
Uses Hyperkewl Fabric to cool for 5-10 hoursComfortable V-neck Style with full zipperWill not bulge or change in fit or appearanceNo slimy residue or swelling gel or crunchy chemicalsMany Size and Color Options
Specs:
Color | 6529-kh-xl |
Height | 15 Inches |
Length | 13 Inches |
Number of items | 1 |
Size | X-Large |
Weight | 0.78 Pounds |
Width | 2 Inches |
33. Ergodyne GloWear 8210HL ANSI Economy High Visibility Lime Reflective Safety Vest, Hook & Loop Closure, 2X-Large/3X-Large
- ANSI-compliant polyester mesh (3.3oz)
- Hook and loop closure
- 2" ANSI-compliant reflective
- Pockets: One inside
- Single mic tab
Features:
Specs:
Color | Lime |
Height | 16 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | XX-Large-3X-Large |
Weight | 0.35 Pounds |
Width | 11 Inches |
34. Combo Weld JKT, Royal/Blk, Ctn/Leather, L
Closure Type: Snap ButtonCuff Style: Fold-In SnapsMaterial: 70% Cotton, 30% LeatherFits Chest Size: 46"Pre-shrunk fabric eliminates sleeve length shrinkage for optimal fit
Specs:
Color | Royal Blue/Black |
Height | 1.5 Inches |
Length | 15.5 Inches |
Number of items | 1 |
Size | Large |
Width | 11 Inches |
35. High Visibility Reflective Winter Bomber Jacket, Black Bottom, ANSI Compliant, Ergodyne GloWear 8377, Lime, Large
- WIND + WATER RESISTANT - 300D oxford polyester outer shell + PU coating resists wind and water to keep you dry
- THERMAL INSULATION - 160g quilted insulation for comfortable warmth without extra bulk
- TYPE R, CLASS 3 - 2" ANSI-compliant reflective material for night-time conspicuity
- DIRT-HIDING PANELS - Black panels on the sleeves and front of jacket to hide dirt and wear
- ADJUSTABLE INSET HOOD – With drawstrings and stoppers, easily zips in or out depending on weather conditions or personal preference
Features:
Specs:
Color | Lime |
Height | 3 inches |
Length | 25 inches |
Number of items | 1 |
Size | Large |
Weight | 1.8 Pounds |
Width | 19.5 inches |
36. Pre Filter, for Hakko HJ3100, 5pk
Pre-Filter Replacements for HJ3100 Fume Extraction System5/PkMade in the USA
Specs:
Color | Red-199 |
Height | 0.08 Inches |
Length | 10.5 Inches |
Size | size-199 |
Width | 8.25 Inches |
37. DuPont TY127S Tyvek Protective Coverall with Hood with Safety Instructions, Elastic Cuff, Large, White (Retail Package of 1)
- Stonewashed blade finish
- Survival preparedness tin
- Glass reinforced nylon sheath
- Designed by Doug Ritter in Gilbert, Arizona
- Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details
Features:
Specs:
Color | White |
Height | 1.5 Inches |
Length | 9.3 Inches |
Number of items | 1 |
Size | Large |
Weight | 0.4 Pounds |
Width | 7.2 Inches |
38. TechNiche International Adult HyperKewl Cooling Sport Vest
- V-Neck With Zipper Closure
- Comfortable Quilted Nylon Outer with HyperKewl Polymer Embedded
- Will Keep you Cool and Comfortable
- Light Weight
- Comfortable Quilted Nylon Outer with HyperKwel Polymer Embedded
Features:
Specs:
Number of items | 1 |
39. Bosch Men's 12-Volt Max Lithium-Ion Soft Shell Heated Jacket Kit with 2.0Ah Battery, Charger and Holster PSJ120M-102
HIGH QUALITY: The PSJ120M-102 12V Max heated jacket is made of 100% polyester. It is both wind and rain resistant, making it the ideal heated jacket for tough outdoor jobsitesQUICK WARMING: Featuring three quick-warming heat zones including two chest zones and one back zone, start warming in a matte...
Specs:
Color | Black |
Height | 13.5 Inches |
Length | 5 Inches |
Number of items | 1 |
Size | Medium |
Weight | 3.4 Pounds |
Width | 16.4 Inches |
40. West Chester IRONCAT 7010 Split Cowhide Leather Bib Apron - 24 in. x 42 in. Heat Resistant Safety Wear in Golden Yellow for Welding. Safety Apparel
Work Safety Apparel: the cowhide leather apron is designed to offer abrasion resistance and safe welding. This specially tanned welding leather offers protection from sparks and spatterDurable Construction: the weld safety apparel is stitched with heat resistant Kevlar thread that also provides maxi...
Specs:
Color | Tan |
Height | 1.13 Inches |
Length | 9.75 Inches |
Number of items | 1 |
Size | 24" Width x 42" Length |
Weight | 1.6 Pounds |
Width | 12.38 Inches |
🎓 Reddit experts on safety apparel
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where safety apparel are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
The implementation might be terrible (i'd like something that hits the side of my head where I drip sweat), but a well designed fan hat could make working in the heat much more tolerable. I'd love some kind of belt buckle which could blow air across the sex machine, maybe something that blows through a front pocket?
Makita fan jacket
cheaper
Something around your neck which blows air on your carotid artery might be the most effective.
I've had to work hauling chain motors shoulder to shoulder with a bunch of sweaty dudes in a 110 degree grid on a humid day before. If it was something I'd do regularly I would absolutely swallow my pride & buy fan clothes. There are few feelings better than taking a skinny compressed air nozzle & blowing cold air it into your work boots (and work pants) on a hot day, you can also blow between the cheeks for an infinite fart.
5.11 (https://www.511tactical.com/) is a bit uniform shop, but you may also want to consider going to a local uniform store and figuring out what options you have there. Your local fire fighters and cops are buying their stuff locally and having patches put on, so see what's there and what can be ordered in. Usually uniform shops have lots of catalogs about too. 5.11 carries some of the most common stuff out there, like the EMT taclite pants: https://www.amazon.com/5-11-Taclite-Mens-Pant-32-32/dp/B004DT0NQ0/ref=sr_1_5?ie=UTF8&amp;qid=1510084402&amp;sr=8-5&amp;keywords=emt+pants
For non-winter helmets look at the petzl vertex, it's got lots of accessories and is pretty popular. For winter, get a ski/board helmet with ear covers that you can drop helmet speakers into. If you'll be on snowmobiles, consider if you need special helmets for those as well.
For "medical gear" you should have someone with formal emergency medical training that can stock that for you, and the training should follow along with the equipment. A lot of people buy stuff that they've never really used before. Figure out how you'll treat traumatic bleeding, then buy that gear, train on it, and put it in the bag. Don't put stuff in because it might work someday someway.
With outer clothing (goretex stuff, etc) it can be tricky to figure out because it's super expensive and custom. If buying $800 worth of snow pants/jackets per person with $100 of customization for each one is in the cards than do it, but because of that price tag often teams on a budget will simply say "wear a red jacket and black pants" which is a little easier for people to follow. You can keep names and insignias on helmets.
You can also just require something standard like "black or dark blue pants, and a red top", and then have people toss a vest on like this: https://www.amazon.com/KwikSafety-Presidential-Reinforced-Reflective-Construction/dp/B071JR8W4G/ref=sr_1_2?ie=UTF8&amp;qid=1510084754&amp;sr=8-2&amp;keywords=class+2+work+vest
Personally I prefer to pick my own base layers and just wear a vest or over-shirt (non winter). I'd much rather wear my own personal wool base layers, and women often find clothing fits pretty difficult.
Yeah, I just quit my job at Walmart doing that very thing, and that's how I was interviewed, but they both interviewed me one right after the other, and I was hired on the spot.
Good luck. It's tough job. Wear sunscreen. Stay hydrated. The dress code at my store was relaxed for the cart-pushers (khaki shorts instead of pants, hats, sunglasses were all allowed). They also allowed us to wear shirts like this instead of the polo and safety vest.
Also, be ready to find some disgusting things people left in the carts (I've found such treasures as diapers and spoiled cottage cheese).
The major risk is the meter blowing up, so that's what you protect for. One of the utility guidelines is 4 calorie PPE for 240V meters and 20cal for 480V meters.
So if we figure 4cal for house meters then 70E would want:
coverall
hood
I'm a firm believer in simple PPE, because the more steps and bullshit the less likely guys are to use it. I would do it so you're putting on 3 things:
Super easy to put on, no screwing around with pants and suspenders. Look around you can probably find it for below $150. This 12 calorie on Amazon is a steal, this is normally a $500 coat.
It stays on it's own hardhat, so again: Easy to put on and off. That 10 calorie model is probably about as cheap as you're gonna find. If you want more protection or one that isn't tinted green they get more expensive from there.
Your hands are almost always gonna be the closest point to any arc flash, and there's a good chance they will need much more than 4 calorie protection. We know the insulated glove & leather protector combination is fantastic arc-flash protection, even though it doesn't have an official rating. You also get the added benefit of shock protection through 1000V.
If you don't want to deal with the extra care necessary for insulated rubbers, I'd go with arc rated leather gloves. But be aware: Those offer zero voltage protection.
I suppose it's better than nothing, unless you get this and think you've got it all covered. As others have pointed out, the shovel is not what you need to dig out snow, there's no jumper cables, fleece is great for fall but not winter. I think this is a nice gift to give those that won't prep anything for themselves. When I look at this I see it being useful if you went to work on a sunny warm day and came out to your car in the parking lot covered with snow and plowed in, not for going off a country road and digging out.
Consider adding a safety vest I think it's important to have both colors AND reflective tape on it, prices range from 5 dollars to 30 dollars.
If local laws permit, the 319 bridge over the river looks like a safer bet than the 153 due to its much wider shoulder. I didn't see any signs on the onramp prohibiting bikes on the highway, but check with the Department of Highways (or whatever its called in Tennessee) to be sure.
I suggest picking up front and rear lights ($25-30 should get you a basic set), and some sort of high visibility vest (like this or this). If you're riding after dark, some reflective tape on the bike would make you stand out in headlights.
Good luck, and stay safe.
I have a packable Columbia rain coat that is pretty nice, I can't really call it BIFL though because I've only had it a year and I think it's discontinued. I got stuck in a storm on an 18' fishing boat on Lake Erie and it kept my torso dry. Everything else was soaked. It's not really fashionable but my friend used my 3m raincoat. That thing is definitely BIFL. I've had it since 2012, have used it for work, and it lives balled up in the back of my truck but had never leaked. I got it from an old employer so I can't give you a brand or anything, but this is the closest I could find on Amazon. It's nice too because the hood stows away in the collar.
Occunomix LUX-TJR-YM Occulux Premium Breathable Rain Jacket, Medium, Yellow https://www.amazon.com/dp/B004QNZL5G/ref=cm_sw_r_cp_api_1ovLybXSBRR4D
Get a hi-visibility vest. I always ride with an ANSI Class II vest, and I think I'm more visible at night because of it.
You can also get some 3M reflective tape to put on your fenders, frame, helmet, etc. It helps to increase your general visibility. Especially put some on your sides— many cyclists do great about having lights front and rear, but from the side are pretty dark. You don't need lights going sideways, but having reflectors on your sides will help to keep cars pulling out of side streets from running over you.
Absolutely do not buy this apron for smithing. The features you want in a blacksmith apron are:
Leather, leather, leather...anything else will simply not last and may, as in the case of this apron, be dangerous.
Because leather, even split cowhide, is pretty heavy, do not buy an apron where the upper support goes around your neck. You want an over the shoulders strap system, not around the neck like this one. I am sorry to say that the apron offered to you by BeastmanCaravan is also an around the neck support system.
In the U.S. you can buy a split cowhide (suede) apron in a knee length with shoulder straps for under $40.00. A smooth leather apron will cost at least three times that, often more. The thickness of a leather apron will also vary quite a bit by manufacturer, and sometimes even within the offerings from a single manufacturer. For that reason alone it is best to buy one where you can handle the apron first. It is also sometimes difficult to tell from the ad on amazon exactly what kind of support system an apron uses. This one, for instance, does not show the strap system:
http://www.amazon.com/3836-Apron-Leather-24X36Dark-Brown/dp/B003GMDJ2A/ref=sr_1_4?ie=UTF8&amp;qid=1459023581&amp;sr=8-4&amp;keywords=leather+apron
However, if you read the description it says:
cotton crossed back straps for comfort.
which means it is shoulder supported, not neck supported.
You have welding supply places all over England. Go shopping.
Depending on what you already own and how crafty you are, reflective ribbon could be a good choice. Sewing on the inside on pant cuffs and shirt cuffs isn't too hard.
Dritz 652 Iron-On Reflective Ribbon Combo, Black https://www.amazon.com/dp/B001B9G09O/ref=cm_sw_r_cp_apa_UqYlybDK7NF5A
I also have a vest similar to this. Folds very small and super visible.
Travelwey Safety Gear Reflective Vest High Visibility Day And Night, Large https://www.amazon.com/dp/B00YNFFDN2/ref=cm_sw_r_cp_apa_ttYlybDV8CJ7B
I have on of these. Works pretty good for short distances. Dries out in about 20 minutes wearing a mesh jacket, and one hour or more with a ventilated textile jacket.
I also have one of these, which works a lot better. Lasts for hours, and does not drip water down into your belt line.
Hey, if you are looking for a cheap safety vest, look for an "ANSI 3" or "ANSI 2" safety vest. These are standards in the US for safety and visibility. These are what highway workers and cops wear. I plan on wearing mine on top of my jacket.
http://www.amazon.com/gp/product/B000765XNG/ref=pd_lpo_k2_dp_sr_3?pf_rd_p=486539851&amp;pf_rd_s=lpo-top-stripe-1&amp;pf_rd_t=201&amp;pf_rd_i=B003M0EG32&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_r=0A55V4JDG4D74VTDAD0D
You do not need pants. I just use jeans, and the the apron over a jacket. Here is what I use:
Get one of these for sure.
http://www.amazon.com/3M-Face-piece-Reusable-Respirator-Assembly/dp/B000FTEDMM/ref=pd_bxgy_hi_img_y
+
http://www.amazon.com/gp/product/B00328IAO0/ref=oh_details_o03_s02_i00?ie=UTF8&amp;psc=1
Gloves - I bought a few pairs. You will use them up at first, till you learn what not to hold on to :) http://www.amazon.com/gp/product/B000MRQAJG/ref=oh_details_o08_s00_i00?ie=UTF8&amp;psc=1
Jacket has some options. Sleeves and an apron:
http://www.amazon.com/gp/product/B002AKIRIA/ref=oh_details_o06_s00_i01?ie=UTF8&amp;psc=1
+
http://www.amazon.com/Welding-Sleeves-Leather-Elastic-Resistant/dp/B002GI9A3C/ref=pd_sim_hi_48
or a plain jacket, but look around. This price on amazon seems high. You might be able to find something like this locally for less.
http://www.amazon.com/Hobart-770488-Leather-Welding-Jacket/dp/B002VECL3W/ref=pd_sim_hi_42
And I use this :http://www.amazon.com/Miller-Genuine-Leather-Indura-Welding/dp/B003IL2RCM/ref=sr_1_10?s=hi&amp;ie=UTF8&amp;qid=1382001569&amp;sr=1-10&amp;keywords=miller+jacket
I’m a small woman 5’1 90lbs and my company bought these for us and it’s nice and warm. The small fits perfectly.
Oh man I love sploofs. Thanks for the tip on the PVC! Much better than cardboard. Let me share a few tips I've learned myself. I recently made an upgraded sploof with a carbon pre-filter in order to effectively remove smell:
http://www.amazon.com/Carbon-Filter-Activated-Xytronic-Absorber/dp/B005C5HUI8/ref=sr_1_1?ie=UTF8&amp;qid=1317798917&amp;sr=8-1
Before the air hits my carbon pre-filter, I have a particle filter before it:
http://www.amazon.com/Pre-Filter-Hakko-HJ3100-5pk/dp/B005CKLJV2/ref=sr_1_2?ie=UTF8&amp;qid=1317798917&amp;sr=8-2
I also stuff a few dryer sheets in there to prolong the life of my more expensive filters.
The result is very little smoke (if you take a big hit blow through slowly, it absorbs better) and an unrecognizable smell. The worst smell now comes from the bowl, not the hit itself. It's amazing, if you have the cash to drop for it. It's basically 5 smoke buddies for the price of one!
I currently use a cardboard roll (thicker than a TP one) but will probably upgrade to the PVC one that you showed me!
Last year I bought this heated jacket.. It sure helps out!
Luckily this year I bought a house with a garage.
The best advice is stay at home, tape up vents and windows and listen to emergency broadcasts. If you have a bath fill it with water before the radiation cloud hits your area to have an emergency supply. Stick to bottled water when possible.
The cheapest option is to grab some Potassium Iodate tablets.
The next option is getting some full body protective gear and a gas mask. Ideally practice donning and removing the protective gear plus keep a spare. Depending on how spendy you want to go it can range from a few dollars and an industrial filter to hundreds (basic millitary NBC clothing and gas mask - don't forget spare cartridges) to thousands/hundreds of thousands (dedicated gear for professionals, nutcases and rich drunks on a shopping spree [Try not to be the latter]).
West Chester 7010 Heat Resistant Leather Apron, 24" Width x 42" Height, Tan https://www.amazon.com/dp/B007UU84LK/ref=cm_sw_r_cp_api_Amu3xbEN1ANDX
I've had this one for a few years. I've only put it through light use, mostly when I heat treat my knives in a charcoal bed or my homemade propane forge. It works fine I have nothing bad to say about this. The pocket is kinda small I don't use it anyway. I hope this helped.
It gets pretty hot here in the summer time. When the temps are steadily above 100, I wear one of these under my mesh jacket. It absorbs a good amount of water that gradually evaporates over a period of time.
I have this cheap-o vest and I wear a headlamp.
I think me being aware of my surroundings contributes more to my safety than reflective gear does. I assume cars cannot see me and do not take any chances.
If you could say what you're cleaning up, I could look for the appropriate PPE a bit better. Here's the 3M website: http://solutions.3m.com/wps/portal/3M/en_US/3M-PPE-Safety-Solutions/Personal-Protective-Equipment/Products/Product-Catalog/?N=5022681+3294529207+8690968&amp;rt=r3
This is on Amazon, but it only goes to 1 micron: http://www.amazon.com/gp/aw/d/B0008F4HNS/ref=mp_s_a_1_fkmr0_1?qid=1406979997&amp;sr=8-1-fkmr0&amp;pi=AC_SX110_SY165_QL70
Sure it is, just put on a cooling vest.
No, annoyingly you have to add all of the parts to an amazon list...
500 Cable Zip Ties 12 Inch Nylon Black
TRM Manufacturing 79126 Weather All Plastic Drop Cloth, 9' x 12' x 0.7 mil (Pack of 6)
Durex Variety Fish Bowl, Assorted Premium Lubricated Condoms, 144 Count - 25% off Coupon!
TAC FORCE Spring Assisted Open POLICE Black Bottle Opener Tactical Pocket Knife
DuPont TY127S Tyvek Protective Coverall with Hood with Safety Instructions, Elastic Cuff, L/XL, White
Duck Brand 280723 Metallic Color Duct Tape, Gold, 1.88 Inches x 10 Yards, Case of 6 Rolls
Faux Leather Full Gimp Hood Mask Padded Locking Eyes Blindfold Bondage
They have tyvek coveralls on Amazon for pretty cheap.
I can't attest to any of this, being new, but I am getting a pair for me, my wife, and my kids. That way, I can assess my comfort level before shelling out ~$100 for the full ventilated suit. I am not sure how much I am going to need it since I am a hobbyist. If I am in it, get stung, and am scared, then I'll run and buy one locally. If not, I'll probably just wear long-sleeves and deal with the sting potential.
Don't forget one of these
https://www.amazon.com/gp/aw/d/B0008F4HNS/ref=mp_s_a_1_4?ie=UTF8&amp;qid=1521667126&amp;sr=8-4&amp;pi=AC_SX236_SY340_FMwebp_QL65&amp;keywords=nuclear+suit
http://www.amazon.com/3836-Apron-Leather-24X36Dark-Brown/dp/B003GMDJ2A/ref=pd_cp_hi_2
Got a reflective vest. For a "unisex" item it runs a bit snug despite not being fitted. 11 dollars, with a zip pocket.
Reflective Vest for Running or Cycling (Women and Men, with Pocket, Gear for Jogging, Biking, Motorcycle, Walking)(Medium) https://www.amazon.com/dp/B00X6J18BC/ref=cm_sw_r_cp_apap_lU2sKKV98UEDo
Here is the mobile version of your link
I’ve been riding continuously for the past 19 years, and off and on for 16 years prior to that. I’ve had a few close calls including going too hot into a corner and almost hitting a 4-Runner head on, target fixated on a barrier and scuffed the front tire on the edge for about 300 feet, rode on the gravel shoulder of an on-ramp because I misjudged the entrance speed and my ability, and got into a tankslapper for no explicable reason other than some Botts’ dots that may have upset the chassis.
As for crashes, I’ve had 2 other than a couple of minor drops: The first happened 5 years ago when a sanitation truck merged into me realizing he missed the weigh station and tried to get back on the freeway, had I been wearing over pants I would have walked away unscathed. The second incident happened in 2017 when the front end of my S1000RR gave way on a cloverleaf on-ramp I’ve traveled hundreds of times before for no reason (possibly spilled antifreeze because I was rolling on throttle when it happened). I was probably going 45 mph and walked away with a small scratch on my right arm where my jacket sleeve rolled up.
As others have pointed, good gear makes a difference, at a minimum I wear a Snell-rated helmet, gloves, a textile jacket, textile pants, and over the ankle boots. I live in hot, Southern California and when temps get over 85, I also wear a cooling vest which does a good job of keeping core temps down.
I own one of these. I have some booties that go along with it. I'm not making the same mistake twice.
http://www.amazon.com/DuPont-Protective-Coverall-Disposable-X-Large/dp/B0008F4HNS/ref=sr_1_4?s=industrial&amp;ie=UTF8&amp;qid=1397484277&amp;sr=1-4&amp;keywords=tyvek+suit
Never tell him/her where you work if possible, but leave subtle hints by "accidentally" leaving work things out. Maybe a booklet or a bottle of odd pills.
Continue this subtle play for months until one day something big happens. You always come home at the exact same time, but this night you don't come home. Instead, you come home the next morning (sweaty, tired, possibly with something splattered across your front) wearing strange garb.
State: "I need a new job". Avoid answering any questions. Go straight to bed.