(Part 2) Reddit mentions: The best collectible toys

I've built my collection of EDH decks since I started playing EDH in around 2011-2012. I used to have a lot more 60-card casual decks, but then my playgroup gradually switched to EDH/Commander because it was "more fair." My collection of Commander decks include the 32 precon decks I've purchased of which about 6 or 7 I've modified. The rest of them are in their original state. I just counted the deck's I've built from scratch and I currently have 57 of them so I apparently have 89 total Commander decks.

I've only disassembled 2 of my Commander decks over time. My first deck I played a lot and it was a Naya [[Survival of the Fittest]] goodstuff deck led by [[Rith, the Awakener]]. It contained the Fruity Pebbles combo, and after I won a few times with that combo I decided to retire the deck. The other deck I took apart was a lame deck that tried to play too many big bombs without enough support, and it was a 5-color deck which made it even harder to play decently. I decided it was better to take it apart and use the pieces for other decks rather than trying to salvage the deck.

I keep most of my decks in these Ultra Pro 150 Count Clear Card Storage Boxes on a bookcase-like storage unit. I can see all of my decks and just grab the ones I want to play and throw them in my Stanley Organizer to take to game night. I've also been experimenting with other deck transportation methods to take less decks to game night since I typically only play 3 or 4 decks in one night.

I typically get to play anywhere from 1 to 4 decks per week, and I got to play 12 of my decks that I brought to Magic Fest Las Vegas. I like keeping the decks together as I feel like they're never actually done being built. I can always find ways to make tweaks to them. I also like keeping my decks together as when I play them they bring back memories of the good times I've had playing with friends and the nostalgia of playing the various commanders.

First class mail package/thick envelope works absolutely fine with 4x8 bubble mailers. It costs about $2.67 if you purchase the postage through eBay, and you get the added bonus of free tracking and delivery confirmation. When you're shipping more valuable cards, you might want to spring for insurance (pay out of your own pocket if the buyer didn't request it specifically). It's pretty cheap and is a good way to play it safe.

 
Here's the method I've used for shipping hundreds of cards on eBay, with absolutely no problems whatsoever. You'll need the following supplies:

 
#000 4x8 Bubble Mailer
Penny sleeve
Toploader
Team bag
Scotch tape
Packing tape

 

1. Place the card you want to ship upside down in the penny sleeve, then fold the excess bit of plastic back up from the open end of the sleeve. This will keep the card from sliding out of the penny sleeve.
    
   
   
2. Slide the penny-sleeved card into the toploader, starting with the folded end of the penny sleeve. Be sure to keep the penny sleeve folded while you do this. It might be a bit tricky to get the card into the toploader, but it won't fall out of the penny sleeve once you do.
    
   
   
3. Tap the bottom of the toploader against a hard surface a couple times if need be to make sure the card is all the way inside and level. Then, tape a piece of scotch tape and tape up the open end of the toploader. Make sure to use a bit longer piece of tape than you need, and fold on end over itself to make a tab on one side of the toploader. This will ensure that the card won't fall out of the toploader during shipping while making it easier for your buyer to get the card out.
    
   
   
4. Place top toploader inside a team bag and seal it. In the event that your bubble mailer gets wet, this should ensure the card remains undamaged.
    
   
   
5. Print out the order invoice, fold it up, and place it inside the bubble mailer along with the toploader. Seal the bubble mailer, then place a piece of packing tape over the flap of the bubble mailer to ensure it stays shut.
    
   
   
6. Print out your postage. You can use a regular piece of printer paper if need be, but I'd definitely recommend going with an adhesive address label. Better yet, if you'll be shipping in volume I'd recommend getting a thermal printer (I've got a Dymo LabelWriter 4XL that's awesome), because then you don't have to worry about smudging, even if the address label gets damp.
    
   
   
7. Apply the postage to the outside of the bubble mailer. If you're using regular printer paper, be sure to tape all edges with packing tape to ensure it stays in place. Then place a piece of packing tape over the addresses. Again, this step is unnecessary if you invest in a thermal printer.
    
   
   Hope this information helps anyone looking for a worry-free way to ship cards!

You will be tempted to buy up big boxes of bulk. I was told I shouldn't, but I did anyway. I figured I could take what I got and make crappy decks, then buy singles to fix them up. While I got some cards that were useful, it was only a fraction of what I got.

Although the decks on this list are all standard legal, they are great for any casual player and are all around $20 each. I really liked this list from Core 2019, too. The M19-only decks are mostly around $10, so they should give you plenty of value.

You can also consider Card Kingdom's Battle Decks. These are non-standard legal decks that are specially made by Card Kingdom with an eye toward balance and casual play. Many of them are out of stock right now, but you should be able to find a few to experiment with.

For non-card purchases, I like these cheap deck boxes for new players to store casual decks (here's a 5-pack instead of the 10-pack). They'll fit nicely inside your bundle box. You might even fit two unsleeved decks in each box. If you want sleeves, KMC is a good value/quality proposition. If you're not too rough, Ultra Pro Matte (not Deck Protector) sleeves are good, too, and a bit cheaper. However, keep in mind the cost of sleeves versus the cost of replacement. I didn't start sleeving my cards until I started building my own decks with cards that had some value to them. Honestly, I'd stick to buying cards until you run out of room in your bundle box and need more storage.

This is going to be fun. Across my multiple wishlists...

1.) Something that is grey.
Grey bedsheets.

2.) Something reminiscent of rain.
Pet water fountain.

3.) Something food related that is unusual.
Astronaut Ice Cream

4.) Something on your list that is for someone other than yourself. Tell me who it's for and why. (Yes, pets count!)
This Bruins banner is for my BFF Becky. She loves the Bruins more than anything. Hockey is her obsession. I put it on my list to remind myself to get it for her at some point. It would make her happy.

5.) A book I should read! I am an avid reader, so take your best shot and tell me why I need to read it!
The Name of the Wind. Of everything I've read in the past 6 months, this one I devoured and have been desperate for the second book in (it's on my list to pick up this week, actually, if my paycheck EVER comes in).

Look, I hate... HATE... first person perspective. I see it as a sign of sloppy writing. However, this book had me SOLD on it. Kvothe is possibly one of my new favorite characters OF ALL TIME.

Avid reader doesn't even begin to describe me. I have my own library. I need books like air. And if I had to make a list of 100 books that were all I was allowed to have for the rest of my life, THIS WOULD BE ON IT.

6.) An item that is less than a dollar, including shipping... that is not jewelry, nail polish, and or hair related!
This kindle book

7.) Something related to cats. I love cats! (keep this SFW, you know who you are...)
The most interesting cat toy in the world

8.) Something that is not useful, but so beautiful you must have it.
This choker. Enough said.

9.) A movie everyone should watch at least once in their life. Why?
The Breakfast Club Why? Because. It's a good movie. Whether you were the jock, the brain, the spoiled brat, the loser, or the troublemaker-- there's a character you can identify with, and it shows that whatever and whoever you are, you can get along with someone who isn't in your clique.

10.) Something that would be useful when the zombies attack. Explain.
A Seed Vault

Everyone worries about fighting zombies.

Dumb. You see, when the zombies come, I'm holing up. A few weeks and if they are undead, they'll have rotted themselves to death. If they are fast moving, viral sumbitches, then they'll have likely ended up offing themselves through dehydration or whatever.

In any event, I'll wait them out. But then, I will need to rebuilt and eat.

(Besides, I have my trusty zombie-killing baseball bat, and a bow. Quiet. Efficient.)

11.) Something that would have a profound impact on your life and help you to achieve your current goals.
This book on Aztec and Inca expansionism. I'm back in school, and my focus is Mesoamerican Studies. Eventual degrees, here I come!

12.) One of those pesky Add-On items.
Zucchini seeds.

13.) The most expensive thing on your list. Your dream item. Why?
A KitchenAid Mixer Why? I like to cook and bake. My mother has one that I used for years when I was a kid and still living with her. I'm 30 now. I remember she got it when I was like, 5. IT STILL WORKS. Over a dozen moves, being abused for holidays making bread and cookies and cakes, being used by my Dad (I swear, he looks at appliances and they break) and it STILL FUNCTIONS PERFECTLY.

I cannot think of a kitchen appliance that would be more useful.

14.) Something bigger than a bread box. EDIT A bread box is typically similar in size to a microwave.

This loft bed

15.) Something smaller than a golf ball.
How about 7 somethings? A set of dice.

16.) Something that smells wonderful.
Italian Herb Bread Mix It smells good when you open the box. When it's mixed. While it's rising. While it bakes. After it bakes. As you've slathered butter on it and begin to nom.

17.) A (SFW) toy.
Hawkeye is so SFW I would bring him in to put on my desk.

18.) Something that would be helpful for going back to school.
This book, of course.

19.) Something related to your current obsession, whatever that may be.
Funko Tyrion Lannister because even a small man can cast a great shadow.

20.) Something that is just so amazing and awe-inspiring that I simply must see it. Explain why it is so grand.
This.

No one will understand the magnificence of this plushie.

It is a rotund, cuddly, snuggly Cthulhu.

But Cthulhu does not cuddle. He does not care. When the stars are right, he will rise from the deeps and from his seat Ry'leh, devour his cultists-- and everyone else-- by the millions, and bring forth an end to all things.

But how can you deny his Elder God wrath? HOW?! Look at him, all squishy and warm and soft. Look at his little T-Rex arms, reaching out for your love and devotion. His eyes, his wiggly little face tentacles. YOU MUST SNUGGLE HIM.

fear cuts deeper than swords

What do we say to death? NOT TODAY.

The KMC Hyper Mat (Matte) Premiums are probably the less opaque of the KMC brand sleeves. They have a different back texture in comparison to the KMC Hyper Mats (Mattes), but the plastic on the front is slightly more glossy, which slightly clouds viewing (you can still see your card perfectly clear, but it doesn't quite let the foils "pop"). It's super minor, but if you're going for the backs not showing, the different texture does help. I think they come in colors other than black, but you have to look around (Amazon is my reference point). Ask your LGS for them.


You're making a good decision by choosing KMCs, that's for sure. The Premiums also have a great shuffle feel if that helps.

Edit: I should have referenced you to the Professor for further details on the Premiums. As they say, it's never too late.


Also should have said this earlier (and my spelling was bad too...that's what happens when I reddit before my AM coffee), but I use these sleeves and have never had an issue with seeing the backs of cards with them. I believe they are the Premiums, but I could be wrong. They have the gloss and texture, so I'm assuming they're Premiums. If they have the same type of plastic in white as they do in black, you shouldn't have an issue with seeing your cards. I use KMCs for everything and they work wonderfully with my double faced cards. I'd recommend them to anyone. My buddy who uses Dragon Shields shuffled with my cards and couldn't stop for a solid hour (I have weird friends). He couldn't believe how they can pull off double sleeving so well and how nicely they shuffled. So there's that upside plus the visibility. Judges seem to like them.

/u/Yokuo You're awesome! and I hope you're having a wonderful day/night!

hey hey /u/eileensariot! you're awesome too and i hope life is going just wonderfully for you!

Here's one I found, though it doesn't say prime, just free shipping! haha I've always found this case to be ADORABLE and I loveeee Harley Quinn (one half of my username of course!)

if that doesn't work, then hum:
THIS CUTIE RIGHT HERE!!!!

Marceline from Adventure Time is family friendly and one of the best characters on the show. :)

One recipe that everyone loves is pizza balls. :) While you can use canned biscuits, I prefer to get the canned pizza crust and stretch it out as wide as I can without tearing it. Cut it into squares, about 12 to 16 per crust. Put whatever toppings you want, we usually stick with pepperoni and pizza cheese. Wrap the ends up and press together to seal it. The sealed part goes face down on a greased pan. Be sure to brush the tops with some butter and sprinkle Italian seasoning on top. Cook at 375 for 10 to 15 minutes, depending on how much toppings you put inside. Meanwhile, heat up some pizza sauce to dip them in. :)

Happy Funko Friday!

@OP... I've been doing some research online and you may find this helpful. I found Tolarian Community College browsing YouTube and although his videos are pretty cheesy and aimed for MTG, a lot of the same principles for card storage apply since MTG and PTCG both use the same standard size cards. After watching almost 80 of his videos (my wife is still laughing at me), I decided to forego my initial plans for storing cards in toploaders. I'll instead be using the toploaders I already bought to sell and trade cards through the mail. The #1 reason why I gave up on toploaders for storage was because the only solution I could find involved commissioning a custom box. I couldn't justify spending the $100's to $1,000's it would require to commission a company like Wyrmwood Quality Gaming Supplies to custom-make a wooden box of sufficient size to store toploaders.

The new storage solution I decided on was to buy 400 (200x2) KMC perfect fit inner sleeves and 400 KMC Hyper Mattes, plus the DEX Protection Creation Line - Medium Box for storing my play decks, the DEX Binder 12 for storing my personal collection, and the DEX Binder 4 for storing the cards I have available for trade.

Let me know if you find any other solutions for storing toploaders!

Edit: Hidden among his hundreds of videos, I found this which includes a review of Kakapopo cases. It looks like the company stopped selling some of their other products in favor of their A2 Briefcase, B2 Carry Case, and D2 Case Cube. It looks like prices for these products are pretty steep and unfortunately they don't have the best reviews. But it's something!

Tak - Abstract game, very flexible, very fun! Feels like checkers and chess. Put the pieces in a bag to bring with.

Jump Drive / Race for the Galaxy (put it in a deck box) - engine building VP generation games about space, very replayable.

Cave Vs Cave - Super fun worker placement ish game.

Lost Cities - Fun 2 player game, can be reboxed. Just cards, very deep gameplay from just cards.

Patchwork - Puzzle tetris style game, lovely theme and artwork.

Jaipur - My GF's favorite game, fun little set collection game.

Onitama - Pretty large box, but very fun 2 player game. Could Proxy pieces and bring just the card and roll up board.

I bought this case, and whenever I travel I slap a bunch of small box/card games in it. Makes traveling with games super easy.

I bet he will find several thousand more dollars worth of cards in there. He should invest in some sleeves and card holders in order to protect his cards. I prefer to double sleeve, then put it in a magic card binder (NOT a regular 3 ring binder) or in a top loaders.

KMC Perfect Fit sleeves

https://www.amazon.com/KMC-Barrier-PERFECT-packs-Total/dp/B00T3Z72Q8

KMC Hyper Matte Playing Sleeves

https://www.amazon.com/KMC-Hyper-Matte-Sleeves-Sheets/dp/B00VCQXQAW

Rigid Top Loaders

https://www.amazon.com/Ultra-Pro-Regular-TOPLOADERS-Standard/dp/B01G1GRLSA

​

You take the card and (carefully) put the card upside down into the Perfect Fit sleeves. The card should fit snugly in there. Then you put the card into the Playing Sleeve with the opening of the Perfect Fit sleeve at the bottom. Then put the whole thing into a top loader.

So Card -> Perfect Fit sleeve -> Playing Sleeve -> Top Loader

​

Good luck!.. And no more bend testing for all that is holy, lol.

​

Edit to add: if they are in extremely good condition (like they look perfect straight out of the pack), it may be best to avoid the Perfect Fit because you can cause very small nicks in the corners if you're not careful putting them in which can affect their grade, but if they look like the Black Lotus you have there, then it's probably not a huge concern.

Kind of long story. I went to a three year high school, I had the same choir teacher every year, and two classes senior year. Every year we went to competitions across the state, around the region, we did a 2 or 3 week long Madrigal Feast production, one year we drove to disneyland to perform and back, stopping along the way and doing workshops. We spent a lot of time together. I loved choir, and i loved this teacher.

We did this regional thing where all of the choirs got together at the community college, did workshops all day and then did a big performance, led by some minor BigWig conductor.

Side note - when you are singing as a group, it is very important to pronounce your words correctly - it is up to the director. In cases like "Won't You" you have to make a hard t and a hard y. no abbreviations like "wontchoo"

For rehearsal, all ten or so choirs were on stage, in position, taking direction from BigWig, all of our directors were in the audience. We were singing a folk song, and BigWig instructs us to say "wontchoo" because it sounds more folksy.

Some girl from another choir immediately contradicts him and says something like "But shouldn't we properly pronounce and separate the two words?" My choir kind of gave each other looks like "...wtf?" They kind of argued over it, it wasn't just a question, she was like "this isnt how it works!" and he was like "...i'm the director, i just want you in unison, trust me it will work if everyone does it"

1. The next day in class my director was discussing our experience and what we learned. Someone brought up the girl, and he said "I am just glad it wasn't one of you, because I would have flown onto stage like a bat from the rafters and dragged you back to hell with me."
   
   
2. I shared this because it is my favorite line i ever heard him say.
   
3. Congrats!
   
4. You will be fine!
   
5. Marceline Funko on my under $5 or $10 list

Pretty sure Nintendo wanted people to buy their World of Nintendo toys if they wanted figures, but the only one I have that doesn't feel like a cheap toy is the six inch Metroid. Now granted that thing just feels awesome to hold in your hand, but the rest of WoN has some snags, like inconsistent paint jobs, characters that can't stand up without some kind of support, and the good ones are even harder to find than some amiibo.

I am obsessed with three things. Disney, Marvel, and The Walking Dead... What's great is that disney owns some marvel. I think I buy too much and I can tell when I'm going on about marvel and some doesn't care, but I keep talking more anyway!

There are so many items on my lists!

A few funko pop items that you could have fun choosing to total $30 a lot of disney, marvel, and walking dead. That's actually all that's on there.

The newbies: Star Lord Rocket Gamora Drax Groot


Toy story is my favorite. The characters are all flawless. So it's cool they're doing the Pixar shorts such as the terror short.
But here is my disney list idk. Maybe attach a funko pop to a movie. See if we can become best friends by your taste.

walking dead just to throw them in the ring. Again. I only talk about these things and some get annoyed some enjoy the discussions.

Amazon is probably your best bet. These are the best card sheets available in my opinion, but it's unnecessary for, say, individual sets or master sets; I mostly use them for my binder of rare and valuable cards. These are probably the second best option and are good for any type of card, otherwise the regular ones found at Walmart and Target are fine; the only thing is they tend to sag at the bottom if the binder is standing vertically but it doesn't damage or affect the cards at all.

For binders, I haven't played around with too many different kinds, but I am very satisfied with the Avery brand. Here's the specific kind I use.

What's more family friendly than an Elsa Frozen Funko? :D

I make a pretty delicious coconut tres leche cake (my boyfriend loves coconut). I found the recipe online somewhere back when I was looking for coconut dessert inspiration. The cake is super big though; we've never been able to finish the whole pan. I've made it 3x now for the bf, so it's become a favorite in our household, but I can't take credit for coming up with it.

9 x13 cake
1 1/4 cups all-purpose flour
1/4 cup coconut flour
1 teaspoon baking powder
1/2 teaspoon salt
1/2 cup unsalted butter
1 tablespoon honey
5 large eggs
3/4 cup sugar (cake)
2 tablespoons sugar (frosting)
1 teaspoon vanilla extract
One can (13.5 oz) coconut milk (the good stuff, canned)
One can (14 oz) sweetened condensed milk
1 1/2 cups whole milk
1 pint heavy whipping cream
Zest from 1 lime
1 cup sweetened shredded coconut

Preheat the oven to 350 and grease the baking dish.
Melt butter and honey together and set aside.
Whisk flour, salt, and baking powder.
Beat eggs, sugar, and vanilla in a separate bowl. Beat in the flour mixture until the batter is just smooth.
Fold in the butter + honey mixture and mix until it is just fully incorporated.
Pour the batter into the pan and bake 25-30 minutes.
While the cake is baking, mix the three milks together.
Spread the coconut out on a baking sheet. Put them in the oven and toast until golden brown, stirring every few minutes. It should take about 9-10 minutes total.
Use a toothpick to poke holes all over the cake.
Now pour the milk over the warm cake slowly. Most of the milk will adsorb into the cake.
Whip the cream, 2 tablespoons of sugar, and lime zest together until stiff peaks form. Spread the cream on the cake, then sprinkle the toasted coconut on top.

Happy Funko Friday!

You might have different needs than me. I have like 30 EDH decks. I wanted cheap deck boxes that would should the commander. I wanted them to be replaceable if I wanted and sturdy enough I wouldn't often want to.

This is not for people who want deck boxes as lovingly crafted as their decks or want completely indestructible boxes that are hermetically sealed. This will repel some water, like rain or a quickly cleaned spilled drink, but not protect again submersion.

I settled on BCW 100 count boxes with a hard toploader attached with packaging tape.

50 count of boxes - https://www.amazon.com/Count-Bundle-Corrugated-Cardboard-Storage/dp/B000K3XPTA/

100 count ultrapro toploader - https://www.amazon.com/Ultra-Pro-Loaders-Sleeve-Promo/dp/B002K2MNGK?th=1&psc=1

If you order each 100 at a go it will cost less than $1 per box. If you buy the stuff for one box, you might pay $2 for the box at an LGS and another dollar for the toploader. it might be worth it to buy a small pack of toploaders because they are randomly useful and I have never regretted having spares.

Add any clear packaging tape and have cheap deck boxes that show off the commander. I used Duck brand max strength ultra clear HD. No clue what my tape is doing with the extra HD pixels, but it is strong and I got it walmart for less than $5 and use it for anything that needs clear tape.

With the dispenser about $6 per roll - https://www.amazon.com/Duck-Clear-Packaging-Refill-441962/dp/B0006HX2MU

Without dispenser about $2 per roll - https://www.amazon.com/dp/B000GR5XCW

Looking at it - it should work fine, seems like they'll fit. I'm not too sure on the differences between the two personally, it does seem to be a slightly sturdier sleeve though - so should be fine. I'd say it largely depends on what reasoning you have to sleeve them. If it's for play, I'd get the hard sleeves as opposed to the ones I linked, and if it's for collection I'd go for the linked sleeves.

Personally I put everything into the perfect sleeves linked, then into the official pokemon deck sleeves (the types in the trainer boxes) - though any standard size should work - and then into a binder. This is for collecting purposes - as both the sleeve types I'm using are glossy and clear on the front, whereas both the Perfect Hard Sleeve and the Ultra Pro Sleeves are matte fronts, meaning they dull the shine and clarity of the cards a noticeable amount - but in exchange for being much sturdier.

For pure collection you don't need hard sleeves as their main use is to protect from shuffling and, say, banging around in a deck box. You should binder or topload any cards that are for pure collection purposes, and of course keep them temperate.

Also keep in mind pricing - the packs are each roughly a similar price, but you'll get half of the sleeves per pack if you go Hard Sleeves.

TL;DR If you're planning on going for collectable storage get the cheaper Perfect Fit Normal Sleeves, and some form of glossy standard card sleeve.
-
If for play, get the Perfect Fit Hard Sleeves (Look around for pricing maybe) and Ultra Pro Deck Sleeves to get the best level of protection for shuffling and jostling.

I couldn't decide so here's your item and another of yours I love Adventure time so I struggled to pick, if I win though a surprise is always nice :). So yeah, I'm cheating a little here 'cause screw rules! You're not my mum!

Hey Kevin, yeah you, Kevin.. I love you Kevin. Yeah that's right everyone I love Kevin.

Just preference on what you like. I like being able to see both sides of the card so I use regular Ultra Pro penny sleeves on my cards. I've been slowly finding my old collection of Pokemon and a lot of the top loaders have yellowed some but the cards inside the sleeves are fine. This an ok deal on penny sleeves and Top Loaders I've got before: https://www.amazon.com/3x4-Top-Loaders-Ultra-Pro/dp/B002K2MNGK/ref=sr_1_1?ie=UTF8&qid=1510800635&sr=8-1&keywords=3x4+Top+Loaders+100+ct+by+Ultra+Pro+-+Plus+100+Free+Card+Sleeve+Promo+Pack+%281+Pack%29

Recently found out about these Pro-Fit sleeves that fit Pokemon cards perfectly and have been using these for cards that I put in binder pages.
https://www.amazon.com/Ultra-Pro-Standard-Pro-Fit-Transparent-Sleeves/dp/B005HXLH3O/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1510800779&sr=1-1&keywords=Ultra-Pro+Standard+Pro-Fit+Transparent+Clear+Sleeves+%28100%2FPack%29+89mm+x+64mm

The solid back colored sleeves to me look alright if you are playing with the cards.

Great advice. All of this is right. I would add one more tip.

Buy 6 sheets of 16 pocket card holders — use these to organize the tech trees so everyone can see their tech pathways. It seriously reduces clutter and speeds comprehension.

You can also use them to organize planets by color to make colonization a breeze.

Also: costumes are fun. And the ambient space playlist on Spotify is pitch perfect. Mood really heightens the experience. We had a brilliant first play and have another game coming up in two weeks since everyone loved it so much. It is the most fun I’ve had with a board game.

Link here: https://www.amazon.com/dp/B01ARJ9AT0/ref=cm_sw_r_cp_api_Ccq7BbMJHSJGR

Actually I am almost done foiling out BW Edrazi & Taxes and started looking into this as well. I went with KMC Perfect Hard + Dragonshield Mattes, and just got the Perfect Hards a couple days ago and re-sleeved. To give you an idea of the thickness increase, prior to that I was using a Ultra Pro 2-Piece 150 Count Clear Card Storage Box for the double-sleeved deck, sleeved sideboard, and extra inner/outer sleeves. (FYI, I love this deck box and use them for all my other decks.) After going with the Hards, the 60 card deck fits fine in the storage box, but not the SB and extra sleeves. This is even after 24-hours of the sleeves sitting under some very heavy programming books. So yeah, that combo does add a good amount of thickness, but they do feel great when shuffling, and I like the added protection. Edit: I tested with Ultra Pro Eclipse and hated them, totally muted the foiling effect and didn't feel any better than DS mattes.


As for a new deck box, I just ordered a Ultra Pro Satin Tower Deck Box. I really hope it fits all the cards and the top doesn't open in my backpack.

I have been having the same issue trying to figure out how I want to store all my dials and tiles. I have noticed that if you want to do binders that the small base tiles fit into the old 1.0 Mini upgrade card sized pages, the medium fit into the Normal card sized pages and the large bases fit into the 4 Slot sheets. In terms of dials I have been reading that people have been using These sheets. I have been on the fence about using binders for these, but I already have a box of 100 mini upgrade sheets from 1.0 that I still have like 80% of because I bought it before 2.0 was announced thinking I would need them. I was considering doing card and coin boxes for them. I know Coin boxes are popular as well for dials and small bases, but for the medium and large I don't really have a solution to those right now. I know I can fit the large into Card boxes, but I don't know if there is a better solution for medium bases.

They are the same size as the oversized Commander cards as well as Planechase, which I believe are all 3x5 inches.

I see that they should fit on the size chart lying down in the main compartment, but that seems like an awkward solution for people who like to keep them with their counterpart decks, as it may not close with several of these stacked beneath a deck. That's pretty much what I am wondering.

Also, it looks like if you used some of the real-estate on the bottom of the lid, you could probably add a simple means of holding oversized cards. (It's super picky, but the one thing keeping me with my current box is that it holds my Archenemy deck as well)

The flat round stands are from Neca: https://www.amazon.com/NECA-Action-Figure-Display-Stands/dp/B00ICNW438

The ones with arms are the 5-pack from Obitsu: https://www.amazon.com/OBITSU-Assembly-Action-Figure-Transparent/dp/B00UUTBFGY

Also available as a 1-pack: https://www.amazon.com/OBITSU-Assembly-Action-Figure-Stand/dp/B002T3TXEK

I had bought the Neca stands for my Star Wars Black Series figures, originally, but they work OK with some Marvel Legends, but not all, since the peg holes on the MLs can be very shallow (and basically useless).

I got the Obitsu stands mainly because their round bases match the Neca stands, but also because they have a cleaner look than the Bandai Stage Act 4 stands.

The Obitsu stands do take a bit of work to get the balance right, though, and they tend to wobble a bit, but eventually they settle down. Heavier figure like the Thor have a harder time of getting the balance right.

They are pretty flexible when it comes to their configurations, though. The Star Lord and Captain Marvel figures are using the same stand, and are connected by a clip-on piece. I had run out of the flat base pieces, which is why I have them like that. The balance isn't super stable, and I had to use an extra piece to keep it from tipping over, but it seems to work.

I'm pretty happy with my storage so far so I'm happy to share.

Here's a link to a few pictures.

http://imgur.com/a/F8Ldw

For the dice I went with 2 Craft Storage Boxes from Hobby Lobby.

http://shop.hobbylobby.com/products/craft-storage-box-666735/

The ones in that picture are a little different than the ones I got. In store they sell the flat bottom containers for $2 and a version with rounded bottoms for 3.

For the cards I'm using Ultra-Pro 18 slots card sheets in a 3 ring binder. I have all the cards sleeved and they fit perfectly (it even helped to fix the warping from the booster packs). You'll also notice that I can fit some card stock printed playmats in the binder as well and tuck the dice bags into the back of the binder.

http://www.amazon.com/Ultra-Pro-Pocket-Side-load-Pages/dp/B009WU5EG4/ref=sr_1_1?ie=UTF8&qid=1398517926&sr=8-1&keywords=Ultra+Pro+18+pocket


For the Basic Action cards, Basic Action dice and Sidekick dice I fit them all into a standard Ultra Pro Deck Box (with the cards sleeved).

For deck boxes I recommend a Pro Tower Deck Box which conveniently holds two fully sleeved decks, and has additional space for any bits, or backup decks you'd like to carry. Once I got tired of sifting through an unsorted compartment for bits, I spent a few dollars on a small tackle box (I use this) to keep things sorted.

As for sleeves, this is a much more personal preference issue, but like Anlysia mentioned you're looking for "standard" TCG sized sleeves. Fantasy Flight has their own brand, but it'll come down to what you're looking for. Some people like to have cool cardbacks/art, some play strictly for the feel of the sleeve, and still others measure them strictly on durability.

For my money, I swear by Dragon Shield Mattes

They feel wonderful, stand up well over time, and come in all of the 5 colors of MtG. 10 bucks will be enough sleeves for both a runner and a corp deck, so they're not cheap, as sleeves go, but earn their investment over time.

I picked up one of these, and really like it!

I can fit 2 decks in it, one in each tray, then where the "oversized" cards are supposed to go, I put two top loaders which hold each commander. I keep the rest of my decks in fat pack boxes... but I am looking to either get more of the tower boxes, or find another solution for bulk decks.

I keep my dice in a Canon lens bag like this They make great dice bags, and dont cost anything if you buy a fancy lens first!

I usually carry everything in my camera backpack it works great to have a backpack that is already designed to hold heavy junk. (plus, I can bring my camera too)

You can see me filling out some binders in this way here:
https://youtu.be/-2CTiWGkeS8?t=5m54s

I use the following products:

• KMC Hyper Mat Clear Sleeves and KMC Perfect Fit Inner Sleeves
  
• Ultra Pro 18-Pocket Platinum Side-Loading Pages
  
• Case-it 4 Inch Zipper Binder
  
  The binders come in 2 and 3 inch sizes as well, I believe. Regardless of what binder you use, I cannot speak highly enough of how perfectly the KMC sleeves fit in the Ultra Pro sheets. Definitely give it a shot.
  
  Also, if you want to see a more detailed review of the binder itself, I look at it here:
  https://youtu.be/6eyj8xvqROE?t=3m32s

Alternatively the oversized ultra pro sleeves with the magic card backing on them work too, they are top loaders.

I don't know about double sleeved, but my single sleeved set fits in one of those 2 deck boxes that have a removable divider in them.

Hopefully this link works
https://www.amazon.com/gp/aw/d/B0041EV4GK/ref=mp_s_a_1_6?ie=UTF8&qid=1495507143&sr=8-6&pi=AC_SX236_SY340_FMwebp_QL65&keywords=2+deck+deck+box&dpPl=1&dpID=41FFaNeOadL&ref=plSrch

Just toss/ keep the divider and they'll fit nice. I'm one set short of the complete planechase set, but it'll fit all of them easy.

This Harley Quinn is super cute and I've been wanting her for a long time :)

Thanks, UPS! Gotta love when they make mistakes in your favor.

I have one of those also, it works great for the tokens and cards. The small containers fit the upgrade cards, the larger containers fit the big cards, so far the only thing that doesn't fit are the movement and range pieces. The best part of that the little containers come out. When we play we just take out the shield, focus, evade and stress cups so the tokens aren't floating around loose on the table. I'm going to move the cards over to a binder as soon as I get the binder sheets that hold the upgrade cards.

For the models, bases and dials I purchased one of these: Plano Double Cover Two Sided Tackle Organizer. It fits everything I have, very well. The bases, movement and range finder all fit in the top part, the smaller ships and a few of the larger ships fit in the bottom. I don't think it will fit the Ghost, and I'm not sure what I'm going to do about that ship.

Finally I bought a bunch of single felt sheets in the craft area at Wal-Mart, I cut the felt into strips and use it as a liner for each of the compartments that holds a ship. I'm not sure if will really help that much much but it makes me feel better. For big ships like the Decimator and Falcon I just wrapped them in a piece of felt.

Oh more than well, I would say it was quite the adventure. I think I might love the twisted dark side...but only behind closed doors.

P.s. I love Harley Quinn. My girlfriend has a Harley wallet. I forgot I had this in my WL. seems slightly more perfect.

What? Where? Ahhhh!

Favorite movie - Muppets Christmas Carol has been since I was a kid. I love the songs and the story. Just one of those feel good movies that makes you smile and laugh at the cheesiness

Elsa

I really love the comics/graphic novels, and I think that they would make a great gift because they just offer more Adventure Time content especially for those who have watched the full series and crave more. Other that that the Funko Pop Figures are fun but not that great for playing with. Maybe the best thing for an 8 year old would be the smaller figurines. And if he hasn't watched the full series yet then there is always the DVD's!

Ooh, I love this. Also I love Kevin. I'd rather it be a surprise if I get lucky. =)

Probably if you're talking about the thin plastic ones like this... https://www.amazon.com/gp/aw/d/B074DVF48M/ref=mp_s_a_1_3?ie=UTF8&qid=1505018810&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=ultra+pro+deck+box&dpPl=1&dpID=417yKdxbkgL&ref=plSrch
My BCW boxes fit fine. I did grab a few of the Pirate Lab deckboxes. They come in sets of 5 and fit perfectly. That being said, I'm sure ultra pros fit.

Bentonite clay [Ana] (http://www.amazon.com/Disney-Frozen-Anna-Medium-Plush/dp/B00G10YZWM/ref=sr_1_3?ie=UTF8&qid=1396844636&sr=8-3&keywords=ana) is my favorite Disney character. I feel like she's the first that didn't need a man's help to save her sister. I'm all about women standing on their own and as much as I love Disney I feel like that isn't such an awesome lesson they teach.

I'm also obsessed with [Harley Quinn] (http://www.amazon.com/Funko-POP-Heroes-Harley-Action/dp/B00DEK943W/ref=sr_1_1?ie=UTF8&qid=1396844728&sr=8-1&keywords=harley+quinn+funko) because she finally stopped putting up with Joker's shit and did her own thing lol. :)

Thanks for the contest!

I use UltraPro American mini sized 16-slot top-loading pages and they work great; fits sleeved cards pretty much perfectly (they'll stick out of the top of the slot about 1mm, but it works fine and actually makes them easier to pull out. You can fit 2-3 sleeved cards in each pouch comfortably).

I would love this Tyrion Lannister Funko Pop because he is one of my favorite characters on Game of Thrones, and he would look great with my other two favorite characters I have Funko Pop figures of, Arya and Daenerys.

Beados - Girls $13.09

Fisher Price Laugh and Learn Puppy - Toddler $12.00

Crayola Paint Maker - Both $12.00

Let's Go Fishin' - Both $9.12

Spot it! Disney Frozen - Alphabet - Girl $8.49

Funko POP Disney: Frozen Elsa Action Figure - Girl $7.89

A few more :) There's actually loads of awesome deals on Amazon right now. Merry Christmas everybody!

What I prefer to do is put all my cards in binders. I have four 2" binders with each of them having 100 pages of 9-Pocket Plastic Sheets. If you go the path of the card holders for binders, I would suggest making sure to only put one card in each pocket, otherwise the pockets will get expanded then the cards will fall out really easily.

I sort the cards by set then the number within the set. There is one binder for trainer cards, one for energy cards (sorted by type, then set), and two binders for the pokémon. The benefit of this system is that it is easy to find specific cards and it is easy to organize and when new sets come out, a total rearrangement isn't necessary.

Mayday ''Standards'' and Ultimate Guard ''Premium'' are some almost-a-penny soft sleeve lines. But I cannot honestly recommend using soft sleeves.

KMC Perfect Fits/Size are a touch more sturdy and thick, but still relatively thin. I can recommend these, but they are meant to be the inner when double sleeving, so they won't totally cover the top edge of the card though.

However, my method is use proper sleeves and toss out the inserts and if necessary move to deck boxes. Options include small, medium, large, also large. Links for example. May not represent the best price and certainly do not represent the only options.

Edit: Obligatory BGG Card Sleeve Sizes for games link. A great resource.

I’ve been using the following products:

https://www.amazon.com/dp/B00XYC3MNI?ref=yo_pop_ma_swf as a general carrying case for all my cards. It has enough room for cards and has some nice Velcro dividers. For premade decks, I use these:

https://www.amazon.com/dp/B074DVF48M?ref=yo_pop_ma_swf

The deck sleeves fit in the case a little snug, but they don’t bend the cards Best I can tell. So far satisfied with my purchase.

I love Disney too! I just did my first half marathon and it was the Disneyland half...it was tough but the Disney crowd is amazing!

I have this cute Elsa funko on my wishlist...she is adorable!

I bought This Pro Tower after someone posted it on here before. As a bit of a challenge, I made my travel box with the intent of getting a wide variety of small-box travel-easy games for between 2 and 6 players.

​

I've managed to fit the following games:

• Game of Thrones: Hand of the King
  
• Cockroach Poker
  
• Red7
  
• No Thanks!
  
• Fugitive (sleeved) - without the optional game board, but with the whiteboard and marker
  
• Fox in the Forest (sleeved)
  
• LoveLetter/DeadDrop (sleeved)
  
• Deck of Cards
  
  I love it and it travels with me almost everywhere. I'm debating trying to fit Mint delivery in there in lieu or Red7/Loveletter.

I have never had a dragon shield matte break or even bend on me. Occasionally I'll get light scratching on the clear side, but that's about the worst that happens.

If you double-sleeve, try [perfect fit hards] (https://www.amazon.com/dp/B01HLTUD5Y). I can't personally testify for their quality, but I've heard great things about them for foils.

Finally, make sure you have one of those silica gel packets (ya know, the little white packets that say "do not eat") in your box. They remove moisture from the atmosphere and help keep foils from bending. Make sure to change that out every 3-4 months, depending on what climate you live in.

Because the binder is small, flimsy, cards easily slide out, pages tear easily, and the cards aren't very well protected. I would only recommend it to people that are super careful with their stuff, don't transport it much, and plan on using it purely to collect in a safe environment. Visually it looks good, and it technically does the job fine, but I wouldn't trust it to protect a expensive collection.

High durability Binder for $6: http://www.amazon.com/Wilson-Jones-Durable-Customizable-W86660/dp/B00CPXDSGS

9-Pocket Pages (50~100 count) cost anywhere from $6~$20 depending on the brand, count, quality, and style you go for. I personally recommend getting Ultra Pro side-loading pages with 9 slots on each side (18 slots per page): http://www.amazon.com/Ultra-Pro-3-Hole-Side-Load-Pocket/dp/B009WU5EG4/

$25 + $9.95 shipping on amazon, if you can't find anyone to trade with. Good luck man.


NOTE: The Groot figure from July was an exclusive glow in the dark version, which the Amazon version lacks. Just so you know. :)

Other ones that are cheaper:


Dancing Baby Groot - $10


Rocket Racoon - $14

Drax - $10


Gamora - $10

Star Lord - $11

This for you.. because holy shit the amount of cute.

This for me, even though it's not 20 dollars I'd love to have it. :P

Thanks for the contest! I love Kevin!

Ultra Pro sheets are definitely cheaper too. You can buy 100 for $20. I also have a massive 4 inch 3-ring binder that holds all the pilot and upgrade cards I am not currently using.

If you want to carry around only the upgrades that you play with then /u/neexneex has a good option. If you want something cheap and efficient to store your extra cards then my way works just fine.

Un-warping is really tricky. It may be faster and easier to double sleeve in perfect fit hards like these: https://www.amazon.com/KMC-Supplies-Sleeves-Collectible-Cards/dp/B01HLTUD5Y


I use them for Magic decks with foils and they do a good job of keeping a uniform flatness.

I've been moving away from BCW cardboard boxes to these: Card Box 1000. I really like them and they're in between the BCWs and really high end stuff like Aaron Cain custom storage. A similar option that some people like is this one: Stack 'n' Safe Deck Box (480 Cards). Also, /U/professorSTAFF just did a review of some nice options by DEX Protection: https://youtu.be/q8uVQmPU334

• http://www.marauderinc.com/category-s/1836.htm
  I can personally attest that these fit a lot of Marvel Legends and SW Black Series figures. Not necessarily all, but a lot of them. They're made for 1:18 figures, and come with two pegs and usually one works. Sometimes I've had to use a blow dryer to heat the foot first to get the peg to fit, but either way, it works. They're pretty cheap and go relatively unnoticed. They're kind of small so typically it's one stand per foot on a ML figure.
  
  
• https://www.amazon.com/NECA-Action-Figure-Display-Stands/dp/B00ICNW438
  When this question comes up I see these NECA stands recommended a lot too, but I haven't used them.

I have one of these with a bunch of card games in. The games change occasionally, but here's what in it right now:

• Red7
  
• Loot
  
• Mystery Rummy: Jack the Ripper
  
• High Society
  
• Hocus
  
• Little Devils
  
• Linko!
  
• Koi Pond
  
• Kigi
  
• Pairs
  
• Coloretto
  
  
  Packing for game nights, I pretty much grab 3-6 games, plus this box. It's great.
  

Last time I travelled with games I bought some of the ultrapro hard plastic deck boxes and a hard plastic project case. Games like Splendor can fit in a deck box. Games with boards / bigger components fit in a mix of deck box and in the project case.

I think I brought 10 or so games with me in 1 project case and 4 or so deck boxes and the hard plastic kept everything safe even in a checked bag.

If you are a player and less of a collector, I have a binder where I put my sleeved (KMC or UltraPro) Foil or Ultra Rare cards since they wont be used and are just for "prestige".

From my Common-normalRares I have a big deckbox with one of those Drybags which will help protecting the cards from moist air.

Here is the Deckbox I use

I mean in the end - you paid money for the cards so why not protecting them from dust and moist air. If like you said I have cards that are common but very commonly used or very good Ill sleeve a playset (3) of them.

I use only 2 Colors, Green and Orange Sleeves, green are all cards I use for decks and for playing so I can quickly build or change a deck without needing to unsleeve and resleeve cards (I mean I have my deck + like 30 other possible deck support cards in those sleeves, no every card) and the orange ones are for cards which have a high value or are for selling or trading.

They're not plastic or cardboard, but I used this for base game + 2 expansions, and upgraded to this for base game + 3 expansions. I've been loving it, very compact for the amount of cards they carry, and very easy to travel with.

Folding credit card knife

Zombie Jake vinyl

Finn with sword vinyl

This shirt

Thanks for the contest. :) I like art.

Has anybody tried this beast? I've been thinking it would be a great all in one box for the ship, squadron and upgrades/damage cards. The oversized front pocket might be to thin to hold many ship cards with sleeves. I do like the dice and small storage drawer though. This thing is HUGE!

https://www.amazon.com/gp/product/B00DHQSG6O/ref=ox_sc_sfl_title_14?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

Top loaders for really expensive cards.

I normally use a thick sleeve idk what they are called bit they are normally a solid color or have a picture on them. And place it in a top loader.

Normally it's like 200 for 12$ on Amazon for non brand picture sleeves.

Here are some examples:

https://www.amazon.com/dp/B009EXIAOC/ref=cm_sw_r_cp_apa_i_S1W0CbVXHYJCF

https://www.amazon.com/dp/B00XAH0V68/ref=cm_sw_r_cp_apa_i_a3W0CbJ7H4CV1

https://www.amazon.com/dp/B01EXOH8SK/ref=cm_sw_r_cp_apa_i_J3W0CbTZH0F9D

You can get like 100 top loaders for 12$ as well mine came with 100 penny sleeves as well but idk if they all do.

https://www.amazon.com/dp/B002K2MNGK/ref=cm_sw_r_cp_apa_i_P4W0Cb5PGHA3V


Side loading binder pages. I just ordered these so I have not tried them but a few people recommended them.

https://www.amazon.com/dp/B009WU21XI/ref=cm_sw_r_cp_apa_i_q5W0CbP9G2VV0


I store my bulk in MTG fat packs or in the pokemon world what would be elite trainer boxes.


I also have like 1000 penny sleeves laying around just in case:
https://www.amazon.com/dp/B000Y4HI7A/ref=cm_sw_r_cp_apa_i_d8W0Cb5DZ0CTX

I just use old binder I used when I was kid or your can just go to any office supply store and get three ring binders for a few dollars.

I just resleeved the deck for this tournament!

The first layer is perfect fits, for which I chose KMC Perfect Hards. The next layer is normal sleeves. I used Pokemon 20th Anniversary sleeves. The third layer is character guards. I used KMC Character Guards (you can get better deals than this). The fourth layer is effectively impossible to purchase now, but they're KMC Strong Hards. I've heard that Broccoli also makes sleeves this size, but I have no first-hand experience with that.

Sorry but it can't hold all of the tokens. I would say it fits about half of them. This is totally enough for me and I take this setup to tournaments and gamenights. But if you want to store everything you might look for another solution.

Maybe this one Pro Tower

I have not used this but it seems like it can fit 2 decks and most or all of the tokens.

For the majority of my components I use 3 ring binders filled with baseball card holders. I took some pictures.

Imgur Album

It works great for small things for which I have multiple different values, like resistors and capacitors.

Here's are the actual bits I used if you want to duplicate:

• Binders
  
• Baseball card holders
  
• Divider tabs
  

They are these:

https://www.amazon.com/gp/product/B00ICNW438

They're OK. The pegs are slightly too large for Black Series figures, and since the peg hole size varies they work better with some than others. Generally I only need them for the female figures since their feet are so tiny. Leia doesn't need a stand because she actually has big enough feet in this costume, plus her boots don't have high heels on them (Ahsoka, I'm looking at you - this is a design feature I do not understand because I cannot imagine that Ahsoka the character would ever in a million years wear heels, but whatever).

I don't know why Jyn stands well - maybe because she's knock-kneed. :)

yea, no need to sleeve your whole collection. just sleeve decks as you make them. personally, i like flipping through my cards in a binder organized by set number rather than going through a bunch of cards in a box. i use these, two cards per pocket front and back.

for sleeves, i like the bcw colored double matte ones. you can find them on ebay for around 30$ for a 1000. i've been using bcw sleeves for the past two years and haven't had a single rip yet.

enjoy the game homie. once you get a feel of the game save this site on your phone. so useful.

The youtuber "the Professor" reccomends KMC Hyper Matte's and double sleeving with them.

The below links lead to amazon bundles of them at a pretty great price.

https://www.amazon.com/gp/product/B00VCQXQAW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00T3Z72Q8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Dude just put your cards in a ziplock and toss it in your backpack.

Jk I uses these (Ultimate Guard Stack 'n' Safe Deck Box (480 Cards) https://www.amazon.com/dp/B00BBYEAZ0/ref=cm_sw_r_cp_api_F5WLBbJY3TNA7) I have two in my backpack. It's a little bulky but they work well and were pretty inexpensive. I just keep a slot open for dice and some tokens.

Impulsive Parasol

I love my Harley Quinn Funko

I have a collectibles list that the funkos are on. THANKS!

1. KMC does sell clear Hyper Mattes.
   
   
2. There are some unfun Planes, but probably only 4-5 at the most. You can find 6 to remove probably, but it leaves you with no extras. In the end, it's unfortunate to have to buy 3, but at least you have extras (which can also be used for Archenemy or oversized Commander cards). In fact, you can get a 2-pack from Amazon for around the same price as one single pack (which is weird), so you might just want to get 2 of those. As mentioned, there is an oversized deck box for holding them as well.
   
   
3. Not really - you'd be better off carrying the 4 decks in a fat pack/deck builder's toolkit box.
   
   
4. Probably not - again, you'd be better off carrying the 4 decks in a fat pack/deck builder's toolkit box.
   
   
5. I'd save the box, as using it with sleeved cards/deck boxes (other than the provided slide boxes) wasn't really the intended purpose. The box itself is so thin (in depth) that I don't think even removing the plastic inner piece would allow it to fit regular deck boxes inside. Moreover, a box that size won't fit into a bag easily, whereas a fat pack box and the oversized deck box will fit almost anywhere (allowing you to preserve the original box for display/something else).
   
   Edit: Additionally, the Planar die that comes with the set is about 2x the size of a normal Planar die, so even finding a place for that is hard. I carry around a set of Chessex dice - the plastic case has some extra room for a normal Planar die if you have one of those sitting around (you basically put the d4, d6, d8 and Planar die at the bottom, then the d20/d10 next and the d12/d10 on top of that - should be an almost perfect fit). Or, you could always use a regular d6 and use 1/6 for Chaos/Planeswalk, respectively.
   
   Edit 2 - Forgot about the Planechase tokens... they're double-sided, so grab a pack of penny sleeves for those - that way, they're protected and still easy to use on both sides. You should have enough room left in the fat pack/deck builder's toolkit box for them along with the 4 double-sleeved decks.

The amiibo two pack for one.

There are also a bunch of figures.

This is actually really cool, I have it and it looks like a full size metroid. https://www.amazon.com/Nintendo-6-Inch-Metroid-Action-Figure/dp/B00ST2AFOW/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1520026792&sr=1-1&keywords=metroid+figure
This is more expensive for now until a price drop, but it's a super high quality samus figure.

https://www.amazon.com/Good-Smile-Metroid-Prime-Corruption/dp/B06ZXWXXL1/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1520026839&sr=1-1&keywords=metroid+figma

They're both removed, but here ya go friend!

Toys"R"Us:

Metroid: http://www.toysrus.com/searchHandler/index.jsp?oos=true&nullProductId=50940496

Ganondorf: http://www.toysrus.com/searchHandler/index.jsp?oos=true&nullProductId=50940456

Amazon:

Metroid: https://www.amazon.com/gp/offer-listing/B00ST2AFOW/ref=sr_1_2_olp?ie=UTF8&qid=1452353844&sr=8-2&keywords=metroid&condition=new

Ganondorf: http://www.amazon.com/NINTENDO-World-Ganon-Action-Figure/dp/B00ST2AFN8/ref=redir_mobile_desktop?ie=UTF8&dpID=61iFxnhc8yL&dpPl=1&keywords=Ganondorf&pi=AC_SY200_QL40&qid=1436332311&ref=plSrch&ref_=mp_s_a_1_3&sr=8-3

Perfectly fitting SEs -- you wish. The sleeves are about 2mm too short... I tried "double bagging" them by having a second SE sleeve the other way round -- but then you actually start having weird refraction light issues and cannot read the cards all that well anymore.

Anyway, at own peril: these are what I am using:

https://www.amazon.com/gp/product/B003D06SGE/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

​

​

For the Locations, I am using these:

https://www.amazon.com/gp/product/B00J01XP52/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

and those are perfect

​

For the FA , WPs, etc, ..

https://www.amazon.com/BCW-100-9-Pocket-Plastic-Sheets/dp/B005JCL05I/ref=sr_1_2?s=toys-and-games&ie=UTF8&qid=1543169921&sr=1-2&keywords=bcw+card+sleeves

Yay, Disney Movie Rewards. So do I want to get a Groot Funko POP or a large Guardians of the Galaxy poster...choices, choices...

ETA: Seeing as how the Groot Funko POP is for some reason $24+$9-12 shipping on Amazon...I went with Groot.

These Ultra Pro sleeves? I have them and really like them, although I've never used the FFG ones, so I can't give you a comparison there. And there are 3 reviews on that Amazon page, all positive.

I use these and they're super cheap. This might not be the best place to buy them. A card shop near me sells them for 1.50. They are 150 count but perfect with sleeves.

https://www.amazon.com/Ultra-Pro-2-Piece-Count-Storage/dp/B01N3S9WIY

Alright so I saw your edit for nothing on your current wishlists. So I've changed my suggestion!

You've gotta go with this cute little evil Funko POP! Harley Quinn! Funko POP!s are the best! And she looks so awesome!

As for me, I'd absolutely LOVE this Spinosaurus because he's a killing machine!

Thanks for the contest!

You could get a Funko Pop bobblehead: Bobblehead

Not the same, but the best I got...

I'm copying my previous post:

I bought this off Amazon

Caseling Xtra Large Case 1650 cards

Cheap, holds 1650 cards (less sleeved I'm guessing), and has moveable dividers. Loving it. Room enough for all my cards and space to grow, and easy storage.

You can get these style ones in different brands (the one I linked to is BBTS), and NECA also make good base only ones here. Just a note about the NECA ones, they only work with figures that have normal size feet. Most of the Marvel Legends should be fine.

Adventure Time!

Your son would love this

He would need Mini Finn and Mini Jake and possibly A big Finn and a big Jake to help fight away the Lich and nightmares!


Go ahead and random me. :)


Adventure Time :D

it's probably better than nothing, just don't bang the tin around and mess up the edges. obviously you don't want to do it forever, in case moisture makes it's way in, or if it can rust. Still the best possible thing would be to put them in card sleeves and then in a rigid top loader card holder if you want to keep them pristine.

If you're looking for a more affordable solution, I would recommend buying this case card ($20) for storing deckboxes + bagged components. You would then use something like a laptop sleeve ($10) to store boards and other paper bits.

https://www.amazon.com/Caseling-Expansions-Moveable-Dividers-Cards/dp/B017237OJW/

Sexy. Be sure to pick up the new World of Nintendo Metroid figure. It can sit on top of the NES. https://www.amazon.com/Nintendo-6-Inch-Metroid-Action-Figure/dp/B00ST2AFOW

I went with plastic sheets for trading card games to organize and store my resistors. It works pretty well and is extremely space-saving, and if you secure it with a card board binder and tight elastic bands, I'd say it would also endure some upside-down maneuvers, although I still wouldn't recommend tossing it around.

Anything off This list aptly titled "Offiz Suppliez"


Specifically any of these: Marshmallow Man, Harley Quinn, Shredder, pretty pens, Since I can't use my WTF Stamp on official documents..., or these awesome PAC MAN PAPERCLIPS.

Mike Mike Mike Mike Mike Mike, you may say... what the hell does Funko Pop have to do with productivity? It makes me smile to look at them =)

Bonus picture of my office area

My personal favorite are BCW 9-pockets. I fit roughly eight cards in a single slot and haven't had many issues (maybe one split in about seventy pages), so I figure a playset would be cake. Got them off Amazon here:
http://www.amazon.com/100-BCW-9-Pocket-Plastic-Sheets/dp/B005JCL05I/ref=sr_1_3?ie=UTF8&qid=1406665467&sr=8-3&keywords=bcw+binder

I used to keep each deck in a case like this to showcase the commander. Now that I doublesleeve my decks don't fit in those boxes as well, so I use these. I think it's easier than grouping all your decks together.

Love your username! Have you considered adding Funko to your list? :D

These are some good inexpensive options.

Ultimate Guard Stack n Safe: hold 6 decks sleeved and has nice dividers
Stack 'n' Safe Deck Box (480 Cards) https://www.amazon.com/dp/B00BBYEAZ0/ref=cm_sw_r_cp_api_gZcjzb6PP7TVY

KMC card barrier: has a better latch than the Ultimate Guard but the dividers aren't as good.
Card Box 1000 https://www.amazon.com/dp/B0007N7P8K/ref=cm_sw_r_cp_api_P2cjzbKP8XM8B

we must be talking about different boxes lol

http://www.amazon.com/Pro-Tower-Deck-Box-Black/dp/B00DHQSG6O

perhaps i wasnt using the right name lol.

this one has a magnetic latch

I picked one up on Amazon for $30 bucks. It's so great. The plastic is soft, it's really well done. Also, /u/sgt_dashie here's a link to pick one up on Amazon for $25

https://www.amazon.com/NINTENDO-World-Metroid-Action-Figure/dp/B00ST2AFOW/ref=sr_1_1?ie=UTF8&qid=1472998430&sr=8-1&keywords=metroid+toy

EDIT: There's 6 in stock on Amazon

Ultimate Guard UGD010085 - Stack... https://www.amazon.de/dp/B00BBYEAZ0?ref=ppx_pop_mob_ap_share

I got this one :)
All the cards fit in there, and the expension too i hope.

May i suggest this?

It allows you to keep 3 double sleeved Decks easily.

This may also suit your needs if you prefer a more fashionable exterior and secured from accidental opening.

i did that and found they moved too much.
I wish I had just printed them on normal stock and put them in top loaders, instead of having them print on card stock and then putting them in top loaders.

http://www.amazon.com/3x4-Top-Loaders-Ultra-Pro/dp/B002K2MNGK/ref=sr_1_2?ie=UTF8&qid=1462683068&sr=8-2&keywords=card+top+loaders

NECA Action Figure Display Stands (Pack of 10) https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_apa_i_0T4kDbXJG3GTG

They work pretty well with some of them

NECA Action Figure Display Stands (Pack of 10) https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_apa_i_zecsDbJNMN28M

This is merely an example.of what I'm talking about. I use these for my action figure but if you read comments some people use these for pops

They have similar discs like these for cheaper if you keep looking on amazon

no they didnt come with stands, unfortunately. i bought a pack of these with them.

theyre good enough. you can set the figures in some cool poses, but nothing extreme. 7 out of 11.

theres only one foot hole on each stand though, even though the packaging makes it look like theres 3. its off to the side, but the base is wide enough where they dont lose balance at all.

I tried switching to binders, got nice ultra pro platinum sheets and ultra pro 3-ring binders (found some space themed ones somewhere)


Nope! Takes up way too much space and too slow to access. Went straight back to the cardboard boxes with labeled tab dividers.


If you still want to do it, I'd be willing to sell you mine cheap if shipping costs are reasonable

I would love this

Dressed All Over and Zesty Mordant

Amazon has 100 Ultra Pro toploaders and 100 penny sleeves for $11 plus shipping. I ship a few dozen cards every month, and one order of these will last me a few months. Otherwise, if you're just using them to store cards, it's probably more than you'd ever realistically need. A great deal, IMO.

If you give Frank another shot (Trash Man would be sick) you should grab this. The body is smaller than regular POPs.

Great work on what you made, especially for your first. Keep it up.

Pretty good, but after shipping it still comes out to about $6 per pack, while you can get 5 for about $4.5 a pack and with fast shipping with Amazon if you have prime: https://www.amazon.com/KMC-Hyper-Matte-Sleeves-Sheets/dp/B00VCQXQAW/ref=sr_1_1?ie=UTF8&qid=1494958836&sr=8-1&keywords=kmc+hyper+matte

I'm using the KMC Perfect Hard sleeves for my player cards and the Ultra Pro Standard Pro-fit sleeves for my encounter cards, agenda and acts decks aswell as location cards.

I'm using the binder pages u/ImNotDareDvl linked to for collection storage and for deck storage I got this deck box last week as an experiment: https://www.amazon.com/gp/product/B0041EV4GK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

It's constructed just like one of Ultra Pro's jank plastic deck boxes, which I've never been a fan of, but it fits 2 sleeved battle decks and easily holds bot cards in top loaders (assuming you're using 3.5 x 5 top loaders) for both decks in the larger space behind them. Only lacks storage for dice/counters.

​

​

I like to save money by repurposing things, but just a heads up that boxes for cards really aren't that expensive. Right now on Amazon you can buy a pack of 5 Ultra Pro deck boxes for $8.50 with prime shipping.

You can be amazing too if you can locate a flower pot.

World of Nintendo Metroid - https://www.amazon.com/NINTENDO-World-Metroid-Action-Figure/dp/B00ST2AFOW

It's actually quite big too, and the plastic top is squishy :)

https://www.amazon.com/gp/aw/d/B00VCQXQAW/ref=mp_s_a_1_6?ie=UTF8&qid=1526220624&sr=8-6&pi=AC_SX236_SY340_FMwebp_QL65&keywords=kmc%2Bsleeves&dpPl=1&dpID=618KNdeE2TL&ref=plSrch&th=1&psc=1. Excellent quality for price. You can get a ten pack too

/u/Shercock_Holmes deserves this Funko because their credit card got stolen last night. And if I win the nomination, I would prefer to give it to SH and add the cat treats to the gifting.

The boxes those come in are like literally 4 dollars

Try this https://www.amazon.com/gp/product/B0002TT3JI/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

https://www.amazon.com/Ultimate-Guard-Stack-Safe-Cards/dp/B00BBYEAZ0/ref=sr_1_62?keywords=mtg+large+deck+box&qid=1554261057&s=gateway&sr=8-62

https://www.amazon.com/Ultimate-Guard-Arkhive-XenoSkin-Card/dp/B01MEG78JC/ref=pd_rhf_se_s_rp_0_22?_encoding=UTF8&pd_rd_i=B01MEG78JC&pd_rd_r=c0e1e997-028c-4398-9fcc-5bced72a9b57&pd_rd_w=N3VtT&pd_rd_wg=eVNeW&pf_rd_p=9ce2a148-6af9-48d3-9a5d-657a16ef4457&pf_rd_r=P15A9KRT2YFT1C12J2PR&psc=1&refRID=P15A9KRT2YFT1C12J2PR

https://www.youtube.com/watch?v=X-T4p7F08Bk

Let me know if there's anything else you need googled

Ultra pro sell these six compartment deck boxes with enough room for 6 decks I believe. I can’t remember what they’re called but they’re a clear acrylic material and relatively cheap. I’ll try to find them online.

So it’s ultimate guard that sell the 6 compartment boxes: 6 deck box

And ultra pro sell these 4 compartment boxes: 4 deck box

[Funko Pop!!](
http://amzn.com/B00BV1P6GK) they come in super heroes, villains, disney, game of thrones, muppets, etc.

I seriously like binders for parts too. I order resistor, capacitor assortments from ebay and then load up the binders. Never run out of common parts that way. Zip lock bags organized into drawers for larger items like cords, switches, connectors.

I use these these. Mine are sleeved in the FFG sleeves and they fit fine. Bought a $5 zip up binder at wal-mart.

got em all! Ugly face and facial hair that doens't belong but I do it for the contests!

my gift choice.

(Hope 3rd time post will bypass whatever is going on with reddit servers.)


I use Ultra Pro Deck Boxes and buy them in bulk. You can store specific types of cards in a different colored box. They hold a lot of cards sleeved and unsleeved. They're cheap. And pretty durable.


Ultra Pro Deck Box 5 Set -- $8.38

Commons aren't really binderable in the first place. I wouldn't bother with them. Side-loading sheets would definitely be the way to go if you can't keep your binder right side up consistently.

https://www.amazon.com/NECA-Action-Figure-Display-Stands/dp/B00ICNW438

I have those. They are fairly good, but as stated by others, not all figures fit. I use museum putty or tak (the clear or white variety) and that holds feet which pegs do not fit to these bases if you have them weight balanced in not to extreme of a pose to where they would fall over.

You haven't gotten me Tyrion from my Funko list :)

Search.

This thread has someone saying they use the 150-count boxes for EDH decks. Also the Amazon page for the 150 count box has questions about EDH decks.

If you google a bit I'm sure you can find people talking about them or at least find the measurements of the box.

Using this one

https://www.amazon.de/Ultra-Pro-82487-Deckbox-Oversized/dp/B0041EV4GK/ref=pd_sim_21_7?_encoding=UTF8&psc=1&refRID=W3X7RZ59X6SE6B6Z86HC

Just one fits all 2009 and 2012 and promo sleeved Planes after you take the freely removable divider out

I use these for bulk storage. They hold about 840 unsleeved cards each, and they'll be nicer to your cards in the long run than tins.

These should work! NECA - Action Figure Display Stands Display Stand - Clear https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_apa_i_pz0yCb0F76P4H

These are fine options:

https://www.amazon.com/Ultra-Pro-Oversized-Black-Decks/dp/B0041EV4GK/ref=sr_1_12?keywords=double+deck+box&qid=1557312596&s=gateway&sr=8-12

https://www.amazon.com/Ultra-Pro-Black-Magic-Finish/dp/B00O0ZFLZU/ref=sr_1_14?keywords=dual+deckbox&qid=1557312628&s=gateway&sr=8-14-spell

I have the first one. It easily fits 2 decks and you can take out the piece that makes it into seperate compartments if you want it to hold all your large cards. I do that sometimes for trading, I just keep my battle cards in a regular deckbox if I do.

The second box doesn't do that, though.

I use this for Pilot Cards and all the Upgrades.

https://smile.amazon.com/Case-Zipper-D-Ring-Binder-DUAL-101-BLU/dp/B000SE0TA4/ref=sr_1_1?ie=UTF8&qid=1503626789&sr=8-1&keywords=double+zippered+binder

I use 3x3 Brown, Grey, Red for the pilots - https://smile.amazon.com/18-Pocket-Pages-Side-Loading-Petrol-Card/dp/B01LYI0DEL/ref=sr_1_fkmr0_4?ie=UTF8&qid=1503627117&sr=8-4-fkmr0&keywords=18+pocket+ultraguard+binder+sleeves+standard+card


and the 4x4 for the upgrades.

https://smile.amazon.com/Ultra-Platinum-Pocket-American-Cards/dp/B01ARJ9AT0/ref=sr_1_fkmr1_2?ie=UTF8&qid=1503628214&sr=8-2-fkmr1&keywords=ultra+pro+16+pocket+binder+sleeve

This works well for me, and I keep all my Game night stuff in a box by Crafted Storage ( Asteroids, Deck, builds and ships etc )

-R

It’s this one here Funko POP Marvel: Guardians of The Galaxy - Groot Vinyl Bobble-Head Figure https://www.amazon.com/dp/B00JEYV048/ref=cm_sw_r_cp_api_Yz6OBb3WAG5GG

Argh. I can't math. I think it's more like $5.40 per 80:

https://www.amazon.com/KMC-Hyper-Matte-Sleeves-Sheets/dp/B00VCQXQAW/ref=sr_1_2?ie=UTF8&qid=1473223201&sr=8-2&keywords=kmc+hyper+matte

I have my stored in a couple of these. One contains the player cards and bits to play the game. The other is encounter cards and the scenario pamphlets. Had I to do over, I'd probably just get one of the 4 or 5 row boxes. It fills up fast.

Within the box, I organize using the cheap Ultra-Pro deck boxes and team bags

https://www.amazon.com/gp/aw/d/B017237OJW/ref=mp_s_a_1_3?ie=UTF8&qid=1468064849&sr=8-3&pi=SY200_QL40&keywords=caseling&dpPl=1&dpID=51wF%2BWAAkNL&ref=plSrch Sorry for the slow reply :)

I'm a Harley Quinn freak, so this is my #1 want at the moment...totally useless for anything other than for me to stare at when I'm at work! Happy Birthday! I'm sorry about the no card thing :( I wish you all the best!

I got a binder and some of those 9 pocket card sleeves: https://smile.amazon.com/BCW-100-9-Pocket-Plastic-Sheets/dp/B005JCL05I?sa-no-redirect=1 Holds credit cards, membership cards, insurance cards, etc... anything that's not in the wallet.

NECA Action Figure Display Stands Clear https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_apa_IFPZAb3A65XQG

Here is what I bought for the upgrade cards:

Ultra PRO Platinum 16 Pocket Platinum Mini American Cards, 41mm x 63mm, Clear
https://www.amazon.com/dp/B01ARJ9AT0/ref=cm_sw_r_cp_api_cznIxbB8TX3CQ

And this is what I bought for the Pilot cards:

Ultra Pro 9-Pocket Trading Card Pages - Platinum Series (100 Pages) https://www.amazon.com/dp/B00095M5DQ/ref=cm_sw_r_cp_api_4znIxb6VJQJE9

Can't see your imgur link at work but you basically have two types of binder sleeve pages:

Top loading: https://www.amazon.com/Ultra-Pro-Pocket-Page-Protectors/dp/B005HIOVOG/ref=sr_1_2?crid=1PW6S35QEALPQ&keywords=ultra+pro+binder+sleeves&qid=1564147002&s=toys-and-games&sprefix=ultra+pro+binder+sl%2Ctoys-and-games%2C151&sr=1-2

Side loading: https://www.amazon.com/18-Pocket-Platinum-Side-Black-Background/dp/B009WU5EG4

Golden advice from the Panda there :-)

The Entertainer/their website (www.toyshop.com) is the best place to avoid inflated prices, but if you are desperate and don't mind paying some extra here are a few Amazon UK links

-- 2.5" Ganondorf: http://www.amazon.co.uk/World-Nintendo-Mini-Figure-Ganon/dp/B00QH9IH2Q/

-- 2.5" Link: http://www.amazon.co.uk/Nintendo-78278-6cm-Link-Figure/dp/B00QGN4UQU/

-- 2.5" Tetra: http://www.amazon.co.uk/Legend-Zelda-Series-Nintendo-Figure/dp/B00VA2R88O/

-- 6" Metroid: http://www.amazon.co.uk/Metroid-Series-Nintendo-Action-Figure/dp/B00ST2AFOW/

-- 6" Ganondorf: http://www.amazon.co.uk/Legend-Zelda-Series-Action-Figure/dp/B00ST2AFN8/

Last two are very inflated prices unfortunately, but it looks like Amazon are importing from the YUK fellows, so at least you can get next day delivery if you wan't.

I like the duel deck boxes - UltraPro makes a generic version of it.

(Take the actual deck boxes out of it and it fits the oversized sleeved planechase cards.)

Actually if youre willing to splurge and upgrade I would recommend these: http://www.amazon.com/Ultra-Pro-Pocket-Side-load-Pages/dp/B009WU5EG4/ref=sr_1_4?ie=UTF8&qid=1422654715&sr=8-4&keywords=ultra+pro+binder+pages

Local shop happens to sell them for the same price as the platinum ones so check your store and see if they carry and how much they charge. The black background makes the cards pop more and you wont see imperfections of the back of cards if you put 2 per page.

If you like to have one then click.

https://www.amazon.com/gp/aw/d/B01HLTUD5Y/ref=sxts_1?ie=UTF8&qid=1525437842&sr=1&pi=AC_SX236_SY340_FMwebp_QL65

You will thank me later

Caseling has done me well. This, or this depending on your size needs

I've been using the NECA figure stands for my Black Series figure that don't quite like to stand on their own. I would recommend them!

https://www.amazon.ca/NECA-Action-Figure-Display-10-pack/dp/B00ICNW438

I started out using index cards, but I got tired of handwriting each spell onto a card. Now I use playing card sized printouts and insert them into those collectible plastic sheets. That way I can move them around to keep them alphabetical for easy reference as my spell book grows. As for prepared spell books, I create one template for different functions, (i.e. in town, dungeon, RP heavy towns, etc) to cut down time during the game spent on preparing my spell book. Then I just keep one empty page if I find myself needing a special setup. It's a little extra paper, but I keep everything in a 1/2" binder so it doesn't make it more difficult to bring along.

This should work. https://www.amazon.com/Ultra-Pro-Magic-Planechase-Oversized/dp/B008KJ8XVQ

As well as this https://www.amazon.com/Ultra-Pro-Oversized-Black-Decks/dp/B0041EV4GK

The worst case is you buy the cheaper one and you're out a few bucks. I would recommend however, checking around your LGS to see if they have any options there that they could let you try out or use to see if you like it.

You could try these for the 3.75 figures


Star Wars 3 3/4-Inch Action Figure Base Pack Stands (Set of 40 Stands) https://www.amazon.com/dp/B00OU87RP4/ref=cm_sw_r_other_awd_-AD3wbQVT7X23


For the 6 inch you can try NECAs


NECA - Action Figure Display Stands, Fits most 6"-8" Figs, 3.5" Dia,Pk of 10 https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_other_awd_dCD3wb8WS64TR


I personally have found good use of the KO tamashii stands. Took me about a week or two to get them, but they're worth it.


Action Base Suitable Display Stand for 1/144 HG/RG Gundam/Figure+Hook Blue New
http://s.aliexpress.com/3IFNjY7F
(from AliExpress Android)

Depends on the size of your collection and if you want to buy the return to... expansions.

Personally I have a small traveling case that I keep the next scenario and the player decks in. And then I keep the campaigns in either the Return to boxes or I have a regular cardboard box for the ones that haven't come out as return to expansions yet.

Edit:
My Setup

• Top box has FA, and CU
  
  
• Box below it has all the extra bits that I don't use much (this has been moved to the closet to make space)
  
  
• Traveling Case (Holds a lot of unsleeved cards or more than enough sleeved ones.)
  
  
• Player Cards in BCW card box (I now have 2 of them)
  
  
• Return to... With their respective campaigns (Night of the Zealot has the standalones)

This is what I do. I have a lot of Harry Potter keychain figures because the scale works better (Dobby, Nifflers, Picket, etc) and museum putty keeps the wobblier ones standing. Marvel key chains are especially difficult because of the bobble head. My classic Ant-Man pop stands up on his own but The Wasp has tiny little needle legs and a GIANT HEAD so I ended up super-gluing her to an extra stand.

https://www.amazon.com/Stack-Safe-Deck-Box-Cards/dp/B00BBYEAZ0 seems okay - room to add two more.

$15 via amazon. World of Nintendo 6-Inch Metroid Action Figure https://www.amazon.com/dp/B00ST2AFOW/ref=cm_sw_r_cp_api_tnz7BbW882MWJ

Amazon: https://www.amazon.com/KMC-Hyper-Matte-Sleeves-Sheets/dp/B00VCQXQAW/ref=sr_1_2?ie=UTF8&qid=1468421850&sr=8-2&keywords=kmc+hyper+matte

Caseling Extra Large Hard Case (2 Row) for C. A. H. Card Game. Fits the Main Game, All 6 Expansions Plus. Includes 6 Moveable Dividers. Fits up to 1650 Cards. - Card Game Sold Separately. Black https://www.amazon.ca/dp/B017237OJW/ref=cm_sw_r_cp_apa_i_HC5CCbF5NJHRD

It went up in price a bit from when I bought it but it's still a solid cheaper option.

I have most scenarios in a Go7gaming box insert (make sure you order the correct insert if you decide to go with this one; apparently there is a newer run of Lord of the Rings Card game Core boxes that were a slightly different size. The lgc-006 insert fits both sizes). I love it, but I have mostly replaced the acrylic dividers with card board dividers in order to pack as many cards as possible. Also, I don't sleeve my encounter cards.

My player cards are in a large binder with Ultra Pro, 9-pocket card pages with colored dividers for each sphere.

I have my current deck/s and scenarios along with Team Covenant Adventure Tokens and various dice (for threat tracking and willpower counting, etc.) in this deck box called the Pro Tower.

NECA Action Figure Display Stands (Pack of 10) https://www.amazon.com/dp/B00ICNW438/ref=cm_sw_r_cp_api_i_JlOSCbJS79Y0X

These are the stands I was talking about, if you do decide to buy these stands and they don’t work you can try the boiling water method which is when you boil water and dip in the part of which you want to fix on your pop and you wait a couple seconds for it to soften and then take it out mold it to the pose that you want and place it in ice cold water and that’s should do it.

Well I looked up a couple, but they aren't up to six. the First one is a deck box that holds 2 decks and the second is a deck box that holds 3
(First one)[https://www.amazon.com/Ultra-Pro-Oversized-Black-Decks/dp/B0041EV4GK] (Second)[https://www.amazon.com/Magnetic-Triple-Monster-Protectors-Pokemon/dp/B01D8YWNBI/ref=pd_lpo_21_tr_t_3?_encoding=UTF8&psc=1&refRID=EG2JGRJB29SJQHBHX2YG]

This also works as a deck box for the oversized cards.

https://www.amazon.com/Ultra-Pro-Oversized-Black-Decks/dp/B0041EV4GK

I was planning on buying some of these, and a bunch of these in the appropriate colors. Basically the same as the Duel Deck boxes, without the matching designs.

Lots of people put resistors in (these) and use blue masking tape to close the entryway slot.

Boom?

You could get these sheets: https://www.amazon.com/Ultra-Pro-3-Hole-Side-Load-Pocket/dp/B009WU5EG4/ref=sr_1_1?ie=UTF8&qid=1469986071&sr=8-1&keywords=ultra+pro+side+loading+pages

Buy a white long box at your FLGS for a couple bux, sleeve all the encounter cards and put them in there.

Buy Ultra pro Black pages (https://www.amazon.com/18-Pocket-Platinum-Side-Black-Background/dp/B009WU5EG4) and put your player cards in a binder with them.

Try [one of these] (https://www.amazon.com/dp/B00BBYEAZ0/ref=cm_sw_r_cp_apa_FKsDAbWSNMQ61)?

Method:

• Main Deck Monsters by Type and then Name
  
  
• Extra Deck Monsters by Card Type and then Name
  
  
• Spells by Name
  
  
• Traps by Name
  
  Containers:
  
  
• Ultimate Guard Stack 'n' Safe for cards/decks (holds 480ish sleeved, but way more unsleeved).
  
  
• BCW 660-Count Cardboard Storage for sleeves.

I'd suggest either a trio of Ultimate Guard Stack'n'Safe Deck Boxes, a pair of Quivers or a Stanley 10 Removable Bin Compartment Deep Professional Organizer.

I bought one of these for all my tactics cards:

​

https://www.amazon.com/gp/product/B00BBYEAZ0/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/aw/d/B00BBYEAZ0/ref=mp_s_a_1_13?ie=UTF8&qid=1519780832&sr=8-13&pi=AC_SX236_SY340_QL65&keywords=ultimate+guard