Reddit mentions: The best xbox one game joysticks

For start, turn off any and all forms of auto-aiming where possible, as it's inconsistent in different games and really only helps if you're very casual and have blocks for hands. Start your aiming sensitivity on a lowish setting, then increase it by a notch every few games until you're at the highest one you can comfortably snipe with.

Also do yourself a favour and get yourself a pair of Xbone analogue stick caps and put them in your DualShock 4. It's very cheap and easy to do, sticks and instructions here:
https://www.amazon.com/Original-Black-Xbox-Controller-Analogue-Thumbsticks/dp/B00JQX91HU
https://www.ifixit.com/Guide/DualShock+4+Analog+Stick+Covers+Replacement/22675

Say what you will about Microsoft, but they understand gamepad ergonomics far better than Sony do... the reason that the left stick is high on their controllers is because that's a more natural resting position for your thumb that causes less strain when pressing the stick forward for long periods of time, which is what you're doing in most games, most of the time. Getting Xbone caps won't give you that but it will give you the other smart little touches they added.

Look at this photo and note the differences between those sticks and the default ones:
http://i.imgur.com/SJCIyVB.jpg

Concaves: it's harder to pull something than to push it, and pulling something without a proper grip is even harder again. You get a proper grip by applying force perpendicular to the object you're pulling, not sliding parallel against the sides. The convex stick tops that Sony uses ensures that there's always a degree of sliding against it, which is obviously not as effective as getting a proper hold into a concave like you can in the Xbone sticks.

Ledge: there's also a hard "ledge" at the outer edge of the concave that makes sure your finger doesn't slip off the stick, as opposed to the soft bump that allows more slippage on Sony's sticks.

Textured edges: these are there to ensure that you have as much grip as possible while moving he stick up and down, as your thumb doesn't push/pull from directly below or above the stick, but off to the side at an angle. While Sony's sticks have a texture too, the softer blunt bumps found on it will never allow as much grip as the harder sharp texture on MS's sticks.

You're probably thinking these are tiny things that won't make a difference to your aiming, but in terms of ergonomics, those little things all work together to make a pretty big difference. Try the yoga mission in GTA V with both sets of sticks and it'll become very obvious which ones allow a better, more precise grip.

have you thought of just modding a regular controller?

https://www.amazon.com/Collective-Minds-Xbox-One-Mod-Pack/dp/B07H4MPJ5X/

https://www.amazon.com/Bionik-Quickshot-for-Xbox-One/dp/B01N1QO0TS/

i tried the elite controller but just wasn't a fan of how all the parts could come off, so i stick to a regular controller since they're way easier to replace and i love the bluetooth functionality. i use the x1 controller with the snes classic and emulators on my android devices and it works wonderfully.

i could understand if you got too used to the paddles though. i would have loved those when i was really into online fps a while ago.

Like anything there is no agreed upon "best".

There are GelTabz....
http://www.amazon.com/GelTabz-Performance-Thumb-Grips-PlayStation-4/dp/B00GOOSV98

GripIt...

http://www.amazon.com/Grip-iT-Analog-Stick-Covers-Xbox-360/dp/B003NSLGW2

Butterfox (I had these for a while)
http://www.amazon.com/ButterFox-Thumb-Grips-Controllers-PlayStation-4/dp/B00J44J6NA/

Off brand silicone...
http://www.amazon.com/Replacement-Silicone-Controller-Joystick-360-Controllers/dp/B00OXT579S/

KF....

http://www.kontrolfreek.com/thumbsticks.html/

You'd be better off watching YouTube reviews of these various products.


None of which might fit great now that the rubber on your controller is actually falling apart. Might require some hot glue or something else if you want them to stay in place.

A lot of people eventually switch to xbox style sticks, not just because the material doesn't fall apart but because it's actually a much better design. These compared to the DS4 sticks is night and day in terms of control and your thumb not sliding all over the place.

http://www.amazon.com/GAMING%C2%AE-Original-Xbox-Controller-Analogue-Thumbsticks/dp/B00JQX91HU/

Not that hard to install. Hardest thing about taking the controller apart is getting the shell separated for the first time and the fact that the triggers and springs might fall out, so just work on a clean table where you'll be able to find the little springs. Watch videos on how to take it apart.

I'm on my third controller as a Day 1 player. First was the actual Day 1 controller (joysticks wore out), second was a plain stock (ditto on the joysticks), third I custom made with a TitanFall controller and aluminum joysticks (they're awesome, if anyone's interested). I've been using this one for almost a year now, and it's amazing. The joysticks are still responsive, obviously haven't worn at all, and actually stay really cool temperature-wise. This is one of those things where, IMO, you get what you pay for.

https://www.amazon.com/dp/B071R44VH8?ref=yo_pop_ma_swf

I did this upgrade and fucking love it. Super easy.

I'm on Xbox and previously used bumper jumper. But I recently bought this and mapped the right paddle to jump and left for reload. I use puppeteer and switched the bumpers in the Xbox controller settings so melee is LB and grenade is RB. Now I can skate/jump pretty well, shadestep/slide/TG, aim my super better, and melee quickly after firing.

Really the only downside is I can't wombo combo (smoke/grenade) too fast or else I'll activate my super.

I would love the Elite, but really just can't afford it. I'm considering buying the strike pack controller modifier- Has anyone tried one of these? I would love to hear some input on it

Best controller? I'd definitely say the xbox one elite because of the paddles on the back. You could also just get a battery pack that has paddles. They're a lot cheaper, and work with your existing controller.

The paddles are important because they allow you to keep your thumb on the right analog stick. I switched from controller to MKB in open beta because I didn't like the idea of having to move my thumb to GBC, dodge, or feint.

I'm not sure about best controller settings. You definitely want to lower your dead zone setting to probably 5. Someone might be able to recommend good controller settings.

First I bought this: X-Box One thumpsticks for DS4

It was way better than the original sticks. 2 days ago, I replaced them with aluminium ones: Aluminium sticks

It's a bit slippery, hard to grasp. I think I'll put xbone ones back. I've been using those for months and they were great.

It's too late for him at this point. The covers will only fit properly on undamaged thumbsticks. The only solution now is for him to get a new set of thumbsticks on Amazon.

I recommend aluminum ones:
http://www.amazon.com/gp/product/B00K23LKK4/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1535523722&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00K7UHG8W&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0BEJE28Z7F7P8AC75XH3

But if you prefer rubber, you can't go wrong with X1 versions:
http://www.amazon.com/Original-Black-Xbox-Controller-Analogue-Thumbsticks/dp/B00JQX91HU/ref=pd_sim_vg_1?ie=UTF8&refRID=1Q6NM0PJT9TQPJCGT8CW

I bought this for my Xbox One controller (I play on PC) https://www.amazon.com/Collective-Minds-XBOX-ONE-Strike-Pack/dp/B01720MZJO. It adds paddles and is relatively affordable compared to the Elite.

Definitely worth it IMO -- makes GB tech infinitely easier and allows you to keep your right thumb on the stick most of the time.

Do not, and I mean DO NOT, get a Scuf controller. They are overpriced and breaks insanely quickly. You'll be lucky to last even a couple months with one.

Razer are an okay product. I don't particularly like them. They are popular only in name alone, imo.

I'd say, even if you don't run Windows 10, still go for the X1 Elite controller. The default button mapping is fine and it's the only controller in the market that feels genuinely premium and will last at least a year.

But if you still refuse the X1 Elite controller, your best option are one of these.
https://www.amazon.com/Collective-Minds-XBOX-ONE-Strike-Pack/dp/B01720MZJO
https://www.amazon.com/Collective-Strike-Dominator-Controller-Adapter-Paddles/dp/B01L8QHXJA/ref=pd_sbs_63_img_0?_encoding=UTF8&psc=1&refRID=HBG35K784WBJMXD6G4E4

Here's a cheaper alternative but I would say yes if the price doesn't go above $140. Also, Xbox Elite Controllers are the same thing basically with better paddles. http://www.amazon.com/Collective-Minds-XBOX-ONE-Strike-Pack/dp/B01720MZJO/ref=sr_1_6/186-8082418-4017529?s=videogames&ie=UTF8&qid=1463971487&sr=1-6&keywords=xbox+elite+controller

http://www.amazon.com/Xbox-One-Elite-Wireless-Controller/dp/B00ZDNNRB8/ref=sr_1_1?s=videogames&ie=UTF8&qid=1463971836&sr=1-1&keywords=xbox+elite+controller

> you can use tac com without taking your thumb off

With this little number you can have the best of both worlds.

Been playing Tournament with two active back buttons/paddles since UE. Never looking back.

I recently just picked this up and also mapped the paddles to A and B. Did you find yourself still pushing the buttons instead of the paddles?

Also, can you share your sensitivity/ADS settings? I’ve been messing with both for a while and can’t seem to find a sweet spot. Im looking for similar to cod ADS since I’m so used to gunfire in that game. Nice W!

You might be interested in knowing that most analogue pots (the things that the analog joysticks are put onto) are reverse compatible with other analog sticks.

That is to say, if you have a controller you prefer for hand feel, and another you prefer for analogue stick feel, odds are you can buy the analogue joysticks online and swap 'em out. It's like eight screws, and they pop right off.

On this Amazon page, you can see someone replaced the PS4 joysticks with the XBox One joysticks.

My 360 controller's joystick broke, and I replaced with the joystick from a Duke. It works!

building your own will run close to that...

PCB - cheapest would be pad hack but you'd need soldering skills so ~$50

Case- old one off ebay $50

Buttons - $2.50 each so $25

Joystick - $20

Misc wires and QDs- $15

so you are at somewhere around $150 without factoring in shipping or taxes...

best bet get this - http://www.amazon.com/HORI-Real-Arcade-Pro-Hayabusa-Xbox/dp/B00ND0EBQ8/ref=sr_1_1?ie=UTF8&qid=1426620327&sr=8-1&keywords=hori+xbox+one

If you have a bug up you to do a project then here is a walkthrough - http://stevokanevo.blogspot.com/2013/12/xbox-one-padhack-joystick-building_10.html

Save your money and replace the headphone jack part! I did it and it had better sound!

https://www.amazon.com/dp/B076NHXVJR/ref=cm_sw_r_sms_apa_i_x89MDb5WQM0ZF

I didnt spend 300. I bought scuf extended domed sticks ($13) and scuf grips and trigger stops ($25) and installed them on my controller that came with the console. ($0). So $28 for a better preforming controller (In my mind at least). Debating on wether or not to get paddles for around $50 and installing them. $78 for a homemade Scuf is a lot better than 300 IMO.

edit: links added

I doubt you’re going to find MS replacements. They don’t want you to repair your controller but buy a new one. I found these from Best Buy: https://www.bestbuy.com/site/insignia-analog-stick-covers-for-xbox-one-and-xbox-360-black/4691501.p?skuId=4691501&ref=212&loc=1&extStoreId=478&ref=212&loc=1&gclsrc=aw.ds&&gclid=EAIaIQobChMIi7Ktw4mc4gIVwuDICh19MAWqEAQYASABEgIMjvD_BwE

Another choice: https://www.amazon.com/Replacement-Analogue-Thumbsticks-Xbox-One-Controllers/dp/B00JQX91HU/ref=mp_s_a_1_3?adgrpid=62878733464&gclid=EAIaIQobChMIiIuS7Imc4gIVkUcNCh254A8UEAAYASAAEgJx6_D_BwE&hvadid=274748401886&hvdev=m&hvlocphy=9004331&hvnetw=g&hvpos=1t1&hvqmt=b&hvrand=3713652526495498468&hvtargid=kwd-305578375196&hydadcr=18489_9882164&keywords=replacement+xbox+one+thumbsticks&qid=1557873192&s=gateway&sr=8-3

Fantastic, thank you! Going to pick up some of these: https://www.amazon.com/gp/product/B00JQX91HU

This is the one I use. I got mine at my local Walmart for like $4 cheaper but they’re the same thing. The downsides of it are it has to be plugged in all the time (it comes with a 10ft cord) and I can’t figure out any of the other things it does lol

It’s supposed to be able to a whole bunch of stuff, but I just use it for the paddles.


Edit: I forgot to add that sometimes my friends complain about static or feedback coming from my mic, but I just unplug and re-plug it in, and it fixes it.


Link: Collective Minds Xbox One Mod Pack - Xbox One https://www.amazon.com/dp/B07H4MPJ5X/ref=cm_sw_r_cp_api_i_bxCRCbVWKPW1T

I mean there's this thing here But it's nothing like the actual Elite Controller. As a proud (and very cheap) owner of the Elite controller, I'll tell you it's definitely worth that $150.

Sure. Mascarry on amazon sells shells, white shells, down by the sea shore.

https://www.amazon.com/MASCARRY-Replacement-Controller-Faceplate-Backplate/dp/B07FFRB8HL?th=1&psc=1

The metal dpad i used can be found here and requires a little bit of filing to get to sit right but very worth it.

https://www.amazon.com/Aluminum-Direction-Button-Replacement-Controller-Gold/dp/B0772QHJDD/ref=pd_aw_sbs_147_of_20?_encoding=UTF8&pd_rd_i=B0772QHJDD&pd_rd_r=21ffd68e-7bc1-11e9-825e-f767610a7f33&pd_rd_w=VJ7HQ&pd_rd_wg=Xs8sc&pf_rd_p=aae79475-6dc9-4a12-80e8-27b63108fa72&pf_rd_r=SBFJ8DZR50FY4Q4F2P24&psc=1&refRID=7BKWQBGV53HY3HHSVM95

I used these buttons, only one small divit was cut into the shell to them into place so they were the easiest part

https://www.amazon.com/Jadebones-Plating-Replacement-Controller-DualShock/dp/B00QYPF67M/ref=mp_s_a_1_11?keywords=Ps4+buttons&qid=1558440612&s=gateway&sr=8-11

And almost the process can be found here...

https://imgur.com/a/DH7FnNk

I have a few other builds I finished including joycons that im probably going to post soon.
I spent way to much trying to find the right parts to not help other if they want to jump into it.

I can't recommend these more: Click

I have changed them on both of my DS4 and they are awesome. You can actually get them cheaper if you don't feel like spending $15 on them. Check sites like http://tinydeal.com or http://dx.com

Was also thinking about Collective Minds Xbox One Mod Pack - Xbox One https://www.amazon.com/dp/B07H4MPJ5X/ref=cm_sw_r_cp_api_i_-My7CbKBNGW8Y

To save money... thoughts? Although, I always like to go big or go home so...

4x Original Black New Xbox ONE Controller Analogue Thumbsticks Thumb Stick by E-MODS GAMING http://www.amazon.com/dp/B00JQX91HU/ref=cm_sw_r_udp_awd_34N-ub1S1TQX4 this is where I got them, but the automatic shopping bot provided by reddit that will post directly after me will probably find you a better deal.

http://www.amazon.com/gp/aw/d/B01720MZJO/ref=mp_s_a_1_1?qid=1451180916&sr=8-1&pi=SX200_QL40&keywords=xbox+one+scuff&dpPl=1&dpID=51L6Trs%2BHxL&ref=plSrch

Here try this..... Much cheaper alternative and offers a lot of the perks of a scuf... If you would like to go even further with the controller, scuf does a package which I forgot the name that comes with back grip plates with adjustable trigger stops...
Hope this helps

I use this controller addon to add two paddles to the back of my Xbox controller for Rocket League. The problem is, after a month or so, the paddle I use for boost always ends up breaking. I've just spent a few days iterating and have come up with a replacement that feels even better than the original.

you can buy a replacement headphone jack piece on amazon for around 5 bucks, and replace it yourself (if you’re not worried about voiding a warranty of course). it’s pretty simple!! just follow this tutorial

also, behold add on paddles for xbone controller. i have them, they work great

I use this for the xbox works great. amazon.com/Collective-Minds-Xbox-One-Mod-Pack

​

I just change the A button the the RB button, then tape the buttons down. Let it go overnight while I sleep.

Get the Xbox One thumbsticks. They are really nice!

I got mine from Amazon (4 thumbsticks): http://www.amazon.com/gp/aw/d/B00JQX91HU

Yeah I bet. Sorry to hear that. Do you have any progress pics of your mod? I would love to take a crack at it myself. I was interested in the collective minds strike pack:

https://www.amazon.ca/Collective-Minds-XBOX-Strike-Pack/dp/B01720MZJO/ref=sr_1_1?ie=UTF8&qid=1523887150&sr=8-1&keywords=xbox+one+paddles

But I found you have to leave the controller plugged in to use it, and that kind of killed it for me.

yup. i've grabbed this multiple times (they sell a 4x pack too http://www.amazon.com/Original-Black-Xbox-Controller-Analogue-Thumbsticks/dp/B00JQX91HU)

i've converted 6 controllers so far for myself and friends and these are the go-to sticks.

It's fabulous. Hibernation is greatly underrated.

The sticks I bought cost more than I remember... I'm not sure if they went up or I can't math.

Here's the link anyway. (I'm on mobile so I hope it works.)


http://www.amazon.com/Original-Black-Xbox-Controller-Analogue-Thumbsticks/dp/B00JQX91HU

If you’re comfortable taking apart your controller then you can fix this rather easily. My headset also stopped working so I bought one of these off Amazon and that did the trick:

Replacement Headphone Jack Plug Port For XBOX ONE Controller 3.5mm Headset Connector Port Socket For XBOX ONE

I'd not heard of these before you mentioned them, but it seems that yep - there is an Xbox One version: -

https://www.amazon.co.uk/Collective-Minds-CM00023-Xbox-Pack/dp/B07H4MPJ5X/

Yeah, I believe that specific one is this Hori stick. They work great with the Xbox One to PS4 Brook adapter though, practically no added input lag.

I know people who have this for PS4 and love it, but can't speak for the XB1 version so be sure to read reviews.

https://www.amazon.com/Collective-Minds-Xbox-One-Mod-Pack/dp/B07H4MPJ5X

you should use the strike pack from collective minds i use it and i feel its buttons are way better than the scuf ones, only down side is that the controller must be plugged in when you use it (PS4 XB1 )

After reading your question, I thought it’d be cool to try so I ordered these...

https://www.amazon.com/eXtremeRate-Thumbsticks-Screwdrivers-Replacement-Controller/dp/B01MQ26TKS/ref=sr_1_19?rps=1&ie=UTF8&qid=1538324157&sr=8-19&keywords=aluminum+thumbsticks+ps4&refinements=p_85%3A2470955011

...they should arrive tomorrow/Tuesday...I’ll post pics and let you know if it works out

No get this https://www.amazon.com/Collective-Minds-Xbox-One-Mod-Pack/dp/B07H4MPJ5X/ref=mp_s_a_1_2?ie=UTF8&qid=1549044347&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=strike+pack+fps+dominator&dpPl=1&dpID=410VXmtN1fL&ref=plSrch

$30 and I enjoy these paddles more than my Xbox Elite

So its the controller. There is a 3.5mm port directly on your xbox so you can plug them in and test them there to be sure but its most likely the controller. Do you have a second one you can test them on?

Edit: cheapest replacement :


https://www.amazon.com/Replacement-Headphone-Controller-Headset-Connector/dp/B076NHXVJR/

Lots of option though, even ones for 10$ that also have screwdrivers for opening and extra replacments

The unit as a whole is a 3d analog joystick but it is made up of two potentiometers so that is what I call it

https://www.amazon.com/Controller-Joysticks-Replacement-Thumbsticks-Screwdrivers/dp/B06XP14B5Z/ref=sr_1_1?ie=UTF8&qid=1506712122&sr=8-1&keywords=xbox+one+potentiometers

OR

https://www.amazon.com/FCGAME-Controller-Joystick-Analog-Replacement/dp/B072FBVZDS/ref=sr_1_15?s=electronics&ie=UTF8&qid=1506712276&sr=1-15&keywords=xbox+one+controller+analog

I use these.


https://www.amazon.co.uk/gp/aw/d/B01MQ26TKS/ref=mp_s_a_1_1?ie=UTF8&qid=1498836627&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=xbox+elite+sticks&dpPl=1&dpID=51am8LBbcxL&ref=plSrch


Just search for "Xbox Elite Sticks" on Amazon. YouTube has tutorials on how to install them, it will require taking your controller apart.

> but didn't want to drop the change on an Elite or SCUF controller

This was the operative part of my statement :\

That did get me looking around though, and it seems like this is a thing? https://www.amazon.com/dp/B07H4MPJ5X/ref=cm_sw_r_other_apa_i_ioA3Db67K8F50

If its not something else you have shit luck. I think you can buy a replacement jack on Amazon and replace it in the controller.


Edit

I think its this

Replacement Headphone Jack Plug Port For XBOX ONE Controller 3.5mm Headset Connector Port Socket For XBOX ONE https://www.amazon.com/dp/B076NHXVJR/ref=cm_sw_r_cp_apa_i_x5GoDbGSDN9Z8

https://smile.amazon.co.uk/Strike-Pack-Dominator-PACK-Xbox/dp/B01720MZJO/ref=sr_1_1?ie=UTF8&qid=1518660261&sr=8-1&keywords=xbox+one+strikepack

Is that the same thing?

I replaced all my DS4 sticks with these

https://www.amazon.com/gp/aw/d/B00JQX91HU/ref=mp_s_a_1_1?ie=UTF8&qid=1520634213&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=xbox+one+sticks&dpPl=1&dpID=41wR5QAzV1L&ref=plSrch

These

This happens to all of mine. Eventually it will start hanging on the outer shell and not return to center by itself. I bought these. Takes 10 minutes to swap out.

E-MODS GAMING® 4x Replacement Black Analogue Thumbsticks for Xbox One/ PS4 Controllers https://www.amazon.com/dp/B00JQX91HU/ref=cm_sw_r_cp_api_i_yr47AbAWP225Y

https://www.amazon.co.uk/gp/product/B01N1QO0TS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

​

https://www.amazon.co.uk/gp/product/B07H4MPJ5X/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

​

they don't need drilling

http://www.amazon.com/gp/aw/d/B00JQX91HU/ref=mp_s_a_1_1?qid=1406979852&sr=8-1&pi=SX200_QL40

Here's the link of the ones that I got from amazon

https://www.amazon.com/HORI-Real-Arcade-Pro-Soul-Calibur/dp/B01A8L6O1E here is a link to the stick i was referring to.

http://www.amazon.com/HORI-Real-Arcade-Hayabusa-PlayStation-4/dp/B00L6AVN5E/?tag=viglink26255-20\

http://www.amazon.com/HORI-Real-Arcade-Pro-Hayabusa-Xbox/dp/B00ND0EBQ8?tag=viglink26255-20

https://www.amazon.com/Onyehn-Replacement-Controller-Screwdriver-Thumbsticks/dp/B07KWWH4FM

https://www.amazon.com/dp/B07KWWH4FM/ref=cm_sw_r_other_apa_i_q5FwDbN382C7N

That may be referring to the brand of hardware. https://www.amazon.com/HORI-Real-Arcade-Pro-Hayabusa-Xbox/dp/B00ND0EBQ8

You mean this?

just get

​

https://www.amazon.co.uk/Collective-Minds-CM00023-Xbox-Pack/dp/B07H4MPJ5X/ref=pd_sbs_107_2/257-4121167-1450540?_encoding=UTF8&pd_rd_i=B07H4MPJ5X&pd_rd_r=4e80fa4f-78bd-4f59-8ee1-f660a3a0c80f&pd_rd_w=olZ0D&pd_rd_wg=zLguk&pf_rd_p=cc188cba-1892-42b3-956f-6c67d0ab7a00&pf_rd_r=ZTGWHJWKR61X8YFBXH8G&psc=1&refRID=ZTGWHJWKR61X8YFBXH8G

HORI Real Arcade Pro (Soul Calibur VI Edition) - Xbox One https://www.amazon.com/dp/B01A8L6O1E/ref=cm_sw_r_cp_api_i_BebyDbATAC553

or

HORI Real Arcade Pro.V Kai Fighting Stick for Xbox One, Xbox 360, & Windows PC https://www.amazon.com/dp/B0136JP894/ref=cm_sw_r_cp_api_i_rcbyDbMVKQ5CV

or if you're feeling fancy

Razer Atrox For Xbox One: Fully Mod-Capable - Sanwa Joystick and Buttons - Internal Storage Compartment - Tournament Arcade Stick for Xbox One https://www.amazon.com/dp/B00LYYNZ30/ref=cm_sw_r_cp_api_i_edbyDbFCTCZQ6

No, you can buy a strike pack for like 20 bucks

https://www.amazon.com/Collective-Minds-Xbox-One-Mod-Pack/dp/B07H4MPJ5X/ref=mp_s_a_1_1?keywords=xbox+strike+pack&qid=1556635583&s=gateway&sr=8-1

This is it: Collective Minds Strike Pack

You could probably find it much cheaper on Ebay.

I put the xbox one thumb sticks into both of my DS4's and couldn't be happier. They can be found for about the same price as a pack of grips

Edit: these are the ones I purchased http://www.amazon.com/GAMING®-Original-Xbox-Controller-Analogue-Thumbsticks/dp/B00JQX91HU/ref=sr_1_1?ie=UTF8&qid=1462534405&sr=8-1&keywords=xbox+one+thumbsticks

I used to use these in my PS4 controllers.

E-MODS GAMING® 4x Replacement Black Analogue Thumbsticks for Xbox One/ PS4 Controllers

After looking up the replacement sticks specifically for the Switch Pro on Amazon, it looks like they share the same design but the skirt size and depth might not work. If they aren’t just right, they’ll come in contact with the rocker or the casing and be useless.

Adjust its front-rear balance and change out to grippier tyres.

^(*ba da bish*)

Anyway, yes, it's possible. Depends on the cause, but usually caused by a faulty potentiometer. https://www.amazon.com/Analog-Joystick-Potentiometers-Microsoft-Replacement/dp/B01DG2X8FW/ref=sr_1_1?keywords=joystick+potentiometer+xbox+one&qid=1563912742&s=gateway&sr=8-1

You'd have to know how to desolder/solder.

You could try out these, they are far cheaper and do the same thing. Just bought one to fuck around with hasn't arrived yet, doubt I'll use them for a long time as I have a 4button cinch.

Xbox

ps4

Canadian links, they are on US, just search.

Been using this as an alternative. Leagues better. And when the shitty controller breaks you can put it on a new one. Collective Minds XBOX ONE Strike Pack https://www.amazon.com/dp/B01720MZJO/ref=cm_sw_r_cp_api_QEF0xbRNKD8NY
Had it since December. Has so many things you can do with it, from rebinding to rapid fire.

I ordered these ones here.

http://www.amazon.com/gp/product/B00JQX91HU/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

No problems with em for 5 months now

Personally don't like either. The Elite's thumbsticks are too loose for me, and the paddles are mushy and don't click or provide feedback when you push them. They are also incredibly sensative.


Scuf my paddles stopped working 4 months in and was told it was out of warranty, tough shit.


Currently I have this on my default controller and absolutely love it for $35. If my controller goes bad I only have to replace that
amazon

This is a bo4 modded controller Bo4 xbox controller

There is also accessories that can basically mod the controller for prices as low as 27 on Amazon. (I’ve seen them at walmart for 30. Xbox strikepack
The strikerpack can use rapid fire and jitter and I’m pretty sure it has Autorun.


Ps4 options are also the strike pack. Ps4 strikepack

Or another modded controller. Ps4

If you want a modded elite/scuf they are also possible to get. Elite Controller

this one isn’t exactly a scuf but it has paddles


Ps don’t hate cuz I have a modded controller, I only use mine for the paddles and in custom games to mess with buddies.