Reddit mentions: The best furniture cups
We found 68 Reddit comments discussing the best furniture cups. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 30 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Slipstick CB845 3-1/4 Inch Bed Roller / Furniture Wheel Gripper Caster Cups (Set of 4) Chocolate Brown Color,Large
- Locks furniture wheels in place with patented, cup design that cradles roller and bed caster wheels
- Ideal for large furniture like beds, pool tables, pianos and dressers each cup can support up to 550 lbs.
- Protective O-ring bottom protects floors from indentation or damage while holding furniture in place
- Caster cups are ideal for 2" diameter (50 mm) roller bed wheels up to 2-1/4" wide
- Simply insert cups under furniture and start protecting your floors instantly
Features:
Specs:
Color | Chocolate |
Height | 0.5 Inches |
Length | 3.3 Inches |
Number of items | 1 |
Size | Large |
Weight | 0.4 Pounds |
Width | 3.3 Inches |
2. Slipstick CB840 3-1/4 Inch Bed Roller / Furniture Wheel Gripper Caster Cups (Set of 4) Caramel Color
Unique cup design locks furniture or bed wheels in place while protecting floors from damageCaster cups are ideal for 2" diameter (50 mm) wheels up to 2-1/4" widePatented rubber O-ring bottom keeps floors perfect by preventing unwanted movementPack of 4 non-slip caster cups support up to 550 lbs (25...
Specs:
Color | Caramel |
Height | 0.5 Inches |
Length | 3.3 Inches |
Number of items | 1 |
Size | Large |
Weight | 0.38 Pounds |
Width | 3.3 Inches |
3. Furniture Cups - Bed Stoppers 4 PCS - X-PROTECTOR Premium Rubber Caster Cups Furniture Coasters – Best Furniture Caster Cups - Floor Protectors for All Floors & Wheels
- ✌ IS YOUR BED SLIDING ALL OVER THE HOME? IS IT SCRATCHING YOUR FLOORS? DO YOU WANT TO STOP IT??? Furniture caster cups X-PROTECTOR® will KEEP THE WHEELS FIRMLY IN PLACE for all furniture which You need and protect the floors in Your lovely home!
- ✌ X-PROTECTOR® furniture cups WORKS PERFECT ON ANY TYPE OF SURFACES – HARD FLOORS & CARPETS. It’s SAFETY & EFFECTIVE for any floors – Hardwood, Linoleum, Laminate, Tile, Carpet, etc.
- ✌ X-PROTECTOR® brown 4 furniture coasters round 3 ½” PERFECT FOR ALMOST ANY FURNITURE WHEELS – it has 2 1/3” wide and 1/4” deep. It will fit to Your bed with wheels, couch, chair, sofa, recliner, desk, table, dresser, piano, sofa, bedframe. Our rubber caster cups will STOP IT AT ONCE AND FOREVER!
- ✌ X-PROTECTOR® bed stoppers have PREMIUM QUALITY and BRANDED DESIGN and they are the best floor protectors & furniture stoppers. To prevent scratching the floors we used for them STRONG & SOFT RUBBER – so it’s safety for the floors and MADE TO SERVE YOU AGAIN & AGAIN.
- ✌ X-PROTECTOR® IS A REGISTERED TRADEMARK – AVOID THE COPIES. WE GUARANTEE OUR CUSTOMERS 100% SATISFACTION WITH OUR PREMIUM WHEEL STOPPERS! IF YOU DON’T LIKE OUR COUCH STOPPERS - WE WILL REFUND YOUR MONEY – JUST TELL! ORDER IT NOW RISK FREE - PRESS THE BUTTON «ADD TO CART» Right Now!
Features:
Specs:
Color | Brown |
4. FISHBERG Pack of 16 Chair Leg Tips Caps 1.0 Inch Anti Slip Rubber Table Leg Caps Floor Protectors for Avoid Scratches,Black …
- 1.Chair leg tips caps material: rubber, Color: black, Pieces: 16pcs
- 2.Rubber leg tips inside diameter (at the bottom): 25mm/1.0 inch; Opening inside diameter 25 mm to protect legs from slipping out; Outside diameter: 25mm/ 1 inch.
- 3.Easily and securely attaches to furniture legs, easy installation.
- 4.Rubber leg tips help to protects floor from scratches and damage.
- 5.Designed for use on metal chair and stool legs.
Features:
Specs:
Size | 1.0 Inch |
5. 50 Pack Self-Adhesive Cork Sheets Squares 4"x4" Cork Backing Cork for Tile Coasters and DIY Crafts Mini Wall Cork
50 PACK: Includes 50pcs of 4"x4" (100mmx100mm) 5/64" (2mm) thick self-adhesive cork sheetsMATERIAL: Made of quality cork with strong self adhesive sticky on the back, durable and sturdy, soft to touch, not easy to break. The natural softwood is textured well, which is odorless, and the surface is An...
Specs:
Color | 50pcs |
6. Rubber Leg Tips Black, 1" 4-count
- Mintcraft 1In Black Rubber Leg Tip FE-50636
- SOUNDBEST INT. / CHINA
Features:
Specs:
Color | Black |
Height | 4 Inches |
Length | 9.25 Inches |
Number of items | 1 |
Weight | 0.11 Pounds |
Width | 10 Inches |
7. SoftTouch 4653295N Furniture Caster Cups Square for Carpet or Durable Hard Floors, 1-3/4 Inch, 4 Pack, Brown, 4 Count
- PROTECT YOUR CARPETING AND DURABLE HARD SURFACES- Everyday use and movement of furniture can actually be damaging your flooring surfaces. These SoftTouch Caster Cups protect your carpeting from dents and pulls and your vinyl, laminate or tile from mars or scratches.
- SLIDES EASILY KEEPING CASTERS OR FURNITURE LEGS IN PLACE- Use these furniture protector cups to reduce friction and slide your furniture easily keeping the caster or furniture leg in place with its cupped design.
- NEUTRAL DESIGN FOR A VARIETY OF DÉCOR- color options that will blend and not detract from your home décor.
- PERFECT FOR ALL FURNITURE- The long lasting furniture mover caster cups can be used on tables, sofas, chairs, curio cabinets, desks and much more
- INCLUDES 4 CASTER CUPS- Each pack of furniture movers includes (4) 1-3/4" caster cups with smooth vinyl bottom for superior floor protection.
Features:
Specs:
Color | Brown |
Height | 3.5 Inches |
Length | 0.7 Inches |
Number of items | 4 |
Size | 1-3/4 Inch, 4 Pack |
Width | 6.7 Inches |
8. Slipstick CB600 Furniture Wheel Caster Cups / Floor Protectors with Non Skid Rubber Grip (Set of 4 Grippers) 1-3/4 Inch - Caramel,Small
Locks wheels into place while protecting floors from indentation and damageFor use with beds, pianos, cribs, pool tables, appliances and moreRubber bottom stops any sliding or scratching the deep cup holds wheel or leg in placeIdeal for furniture wheels or legs up to 1-3/4" or smaller (4.4 cm)Suppor...
Specs:
Color | Caramel |
Height | 0.625 Inches |
Length | 2 Inches |
Number of items | 1 |
Size | Small |
Weight | 0.18 Pounds |
Width | 2 Inches |
9. Remington Accessories 17124, Remington Squeeg-E, 30 Cal/7.62mm
- Type: bore cleaner
- Size: .30 caliber
- Material: polymer
- Patented design allows cleaning of lands and grooves with one pull
- Designed for pull-through flex rods
- Eliminates the need for mops and patches
Features:
Specs:
Height | 2 Inches |
Length | 7 Inches |
Number of items | 1 |
Size | .30 Cal/7.62mm |
Weight | 0.01 Pounds |
Width | 3 Inches |
10. WELLGO Bed Stoppers & Furniture Cups 4 Pack - Premium Silicone Casters Furniture Wheel Stoppers fit All Wheels of Furniture, Sofa Bed Chairs-Made up of Solid Silicone Prevents Scratches(4pcs)
- Material & Size : The Casters Made up of Environmental Solid Silicone. the size is 3” by 3” by 0.7” in outer shape, 2-1/2 by 2-3/8 by 1/2 inch deep inside fit most of wheels.
- The silicone caster cups have polishing surface to contact the ground so that the floor will not be scratched or damaged regardless of wooden or tile, and floor holding will be excellent.
- Original Convexity Design will help WELLGO furniture stoppers bear heavier loads and make your furniture in place firmly to protect floor.
- Most caster wheels at office and home measure 2 to 3 inches in diameter, however our caster cup would fit 1 Inches to 4 inches in diameter& 2-1/2 inches wide, which you can say all the wheels.
- We are 100% are responsible for the quality of bed stopper. If for any reason you are not satisfied with the product, just let us know why and we will offer you full refund or a replacement for a free.
Features:
Specs:
Color | 4 Pack - Black |
Height | 2.99999999694 Inches |
Length | 1.99999999796 Inches |
Number of items | 4 |
Size | 3"X3"x0.7" |
Width | 1.99999999796 Inches |
11. Shepherd Hardware 9226 1-1/2-Inch Inside Diameter Rubber Leg Tips, 2-Pack, Black
From the Leaders in floor and surface protection, these fitted tips protect hard floor surfaces against scratches, hold furniture in-place when in use, and eliminate noisy movement of chairs and stools.1-1/2" inside diameter tip will fit over tubular legs of the same outer diameter.Great for creatin...
Specs:
Color | Black |
Height | 6.55 Inches |
Length | 2.12 Inches |
Number of items | 2 |
Size | 1-1/2 Inch |
Weight | 0.3 Pounds |
Width | 3.62 Inches |
12. Black High Polish Grand Piano Caster Cups 4.75" Pads - Set of 3 - Ebony
High Gloss Black Grand Piano Caster Cup Pads - Set of 34.75" overall width. Inside of caster cup bowl measures 2-3/4"Solid hardwood cupBottom of cup has protective felt paddingGreat for protecting your hardwood floors
Specs:
Color | Black |
13. Adams Manufacturing Carpet Protectors, Small
- Protects carpets from dents caused by sofas, tables, chairs and other furniture
- Clear and nearly invisible to blend in with any décor
- Decorator approved
- Quality "Made in USA" product
- Great in homes, apartments, offices and more
Features:
Specs:
Color | Clear |
Height | 0.625 Inches |
Length | 2.25 Inches |
Number of items | 1 |
Size | Small |
Weight | 0.1 Pounds |
Width | 2.25 Inches |
14. CasterMaster 3X3 Square Rubber Furniture Caster Cups with Anti-Sliding Floor Grip (Set of 4)
CasterMaster Caster Cups protect hardwood, ceramic tile, linoleum, and floors surface from indentations from bedroom or home furniture.Rubber CasterMaster Caster Cups have also been known to be a great support for both upright and grand piano's in homes and bedrooms.Incredibly easy to use. Simply sl...
Specs:
Color | Dark Brown |
Height | 0.6 Inches |
Length | 2 Inches |
Number of items | 1 |
Size | 3 x 3 Inch |
Weight | 0.661386786 Pounds |
Width | 2 Inches |
15. 7/8" Round Insert Chair Leg Glide Protectors | White | Pack of: 25
- These chair glides fit 7/8" inside diameter of tube on patio furniture. Package of 25.
- Protects your patio surface, patio chair feet and patio legs from damage.
- Provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio.
- Glide installs inside the round tube leg of the chair or table. Be sure to measure the inner diameter of the tube to purchase the correct glide.
Features:
Specs:
Color | White |
Weight | 0.2425084882 Pounds |
16. Shepherd Hardware 9075 1-1/2-Inch Round Rubber Furniture Cups, 4-Pack
Includes 4 rubber furniture cupsCaster cups grip floors to prevent furniture from moving or slidingWorks with furniture legs and wheels up to 1-1/2-inchesProtects floors from damage caused by sliding furnitureEasy to use, just slide under bed wheel or furniture leg
Specs:
Color | Brown |
Height | 1.9 inches |
Length | 3.6 inches |
Number of items | 1 |
Size | 1-1/2-Inch - 4 Count |
Weight | 0.02 Pounds |
Width | 6.6 inches |
17. ah hardware Set of 8 rubber feet 20 x 9 mm in bag, Black, (4903M8AH)
Specs:
Color | Black |
Height | 0.35433 Inches |
Length | 7.0866 Inches |
Size | 20 x 9 mm |
Width | 3.937 Inches |
18. Shepherd Hardware 2 Inch Caster Cups - 8 Pack
- Shepherd Hardware 2" Caster Cups
- 8 Pack
Features:
Specs:
Color | brown |
Height | 0.2 Inches |
Length | 2 Inches |
Size | 8 Pack |
Weight | 0.56 Pounds |
Width | 2 Inches |
19. Shepherd Hardware 3697 1-3/4-Inch Non-Slip Furniture Cups, 4-Pack
Designed with C-ring to help prevent furniture from sliding out of placeCup cavity is designed to cradle bed rollersWood grain effect finish matches many contemporary furniture and floor finishesFor use on hardwood, carpet and tile floor surfaces1-3/4" inner cup diameter
Specs:
Color | Woodgrain |
Height | 5.51 Inches |
Length | 1.37 Inches |
Number of items | 4 |
Size | 1-3/4 Inch |
Weight | 0.05 Pounds |
Width | 4.6 Inches |
20. NancyProtectz Small/Brown, Patented with Rubberized Grips/Chair Leg Hardwood Floor Protectors. The Original Furniture Sock
The only one that's Patented with Rubberized grips on the inside to help keep the socks onThe original furniture sock created in 2007. Double layered, Heavy duty cotton and spandex construction provides soft cushioning between furniture and floorEasy to install and stretches to fit most furniture le...
Specs:
Color | Chocolate Brown |
Size | Small |
Weight | 0.11 Pounds |
🎓 Reddit experts on furniture cups
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where furniture cups are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Well, someone should get a prize for punking Comrade Napoleon with this level of brilliant low-cost effort.
Three local news outlets, five different posts here, and all anyone can point to is this: https://imgur.com/ddQQaLm
This is the only image on the local news; the only image anyone posts. And yet no one seems to notice that on the far right end of that "pole" is a stand 1" rubber end-cap. Get yours today on Amazon: https://www.amazon.com/FISHBERG-Chair-Rubber-Protectors-Scratches/dp/B0713WY7J8/
Which means this "noose" is a 7" piece of twine with a loop at the end barely large enough for your thumb, attached to the bottom end of a white metal chair.
You've been punked. But, look on the bright side - you probably didn't call out the national guard to lock down the campus like Dear Leader.
I've got fanatec pedals and a roller chair on hardwoods.
https://www.amazon.com/Slipstick-CB845-Furniture-Gripper-Chocolate/dp/B000QY7VWA/ref=br_lf_m_dmes9kyd7rkd8s5_ttl?_encoding=UTF8&s=hi
work perfectly, just put two under the back two wheels, works like a charm.
I haven't! I did peek around on Amazon and it looks like there's some cheaper options there than in-store. Michael's looks like it's about $5 per sheet?
There's this [50-pack 4x4 square cork paper](50 Pack Self-Adhesive Cork Sheets Squares 4"x4" Cork Backing Cork for Tile Coasters and DIY Crafts Mini Wall Cork https://www.amazon.com/dp/B07PK19KZK/ref=cm_sw_r_cp_apa_i_By0LDbQBYNW8T) for $11 and this [36-pack 4x4 round cork paper](36 Pcs Self-Adhesive Cork Round for DIY Coasters, 4"x 4" Cork Circle, Cork Tiles, Cork Mat, Cork Sheets with Strong Adhesive-Backed by Blisstime https://www.amazon.com/dp/B07N372LGY/ref=cm_sw_r_cp_apa_i_FA0LDbT7VXMGD) for $9.
I have one and it's nice that you can't see it. But really, who thought to put wheels on a bed?? Depending on your floor, yes you can lean against the wall. Also, Amazon sells these. They help. But, if you're having some fun and active sex, well, the wheels will still pop out. This happened to me last weekend and the bed ended up on the other side of the room.
I know a lot of people say noisy/squeaky, but so far, mine is pretty darn quiet. My boyfriend's however is obnoxious.
I have this exact chair and love it. I'm on hardwood floors so I ordered these caster wheel stoppers. They work perfect and can be swapped in and out in a few seconds.
I used this as well. Threw on a couple rubber chair tips (Like these) to angle the board and stained the shelf with a bit of leftover stain. Easiest thing in the world to do, and it looks great!
Don't know about the swiveling situation but I use these under my expensive ergonomic office chair and they work great: https://www.amazon.com/Slipstick-CB845-Furniture-Gripper-Chocolate/dp/B000QY7VWA/ref=sr_1_4?ie=UTF8&qid=1537815771&sr=8-4&keywords=caster+lock
I've been using my folding chair instead of my nice office chair and this comment thread motivated me to find what I think is the solution:
https://www.amazon.com/gp/product/B000QY7VWA/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1
​
Could probably be found cheaper but the reviews convince me it's the correct product at least.
Also I need 5 and it comes in 4 packs FML
For anti-"migration" these worked wonders. Be sure to check out the top comment for a chuckle.
Slipstick CB845 3-1/4 Inch Bed Roller / Furniture Wheel Gripper Caster Cups (Set of 4) Chocolate Brown Color https://www.amazon.com/dp/B000QY7VWA/ref=cm_sw_r_cp_apa_i_hJ.CDb2G1WHWY
Not sure if it would help, but you should definitely isolate your turntable spikes and your cabinet casters anyway. Why not do this and just keep the cabinet closed? Also, maybe move the shelf up a notch, put your amp, eq, and cd player on the bottom shelf, and move your turntable to the top shelf.
Here's a link for some cheap caster cups
https://www.amazon.com/gp/aw/d/B000PAYZ4W/ref=sspa_mw_detail_0?ie=UTF8&psc=1
I use these to keep my chair from rolling: https://www.amazon.com/Slipstick-CB840-Furniture-Gripper-Caramel/dp/B000X8X58S/ref=sr_1_1
And to keep my pedals more secure, I attached a square dowel (.75" x .75") to the front of my pedals and then i used a couple small pieces of wood to build a L on each side of the desk for that dowel to fit into to keep the pedals from moving backwards or lifting up.
I think something like this should be fine?
https://www.amazon.co.uk/Racing-Casters-Function-Plastic-Black/dp/B0170VWXO2/ref=sr_1_1?ie=UTF8&qid=1523620358&sr=8-1&keywords=Caster+lock&dpID=41B%252BWXmVZuL&preST=_SY300_QL70_&dpSrc=srch
Or
https://www.amazon.co.uk/Slipstick-CB600-Protector-Castor-Furniture/dp/B000GA802O/ref=sr_1_6?ie=UTF8&qid=1523620358&sr=8-6&keywords=Caster+lock
Depending on how often you shoot, I soak a clean, new patch in Ballistol and coat the barrel, let it sit for as long as you can the longer the better.
Then I use a bore Squeeg-E from Remington and that help get a lot of copper and lead out of a bore!!
https://www.amazon.com/Remington-Accessories-17124-Squeeg-7-62mm/dp/B004NKSMZI
This $10 purchase improved my set-up greatly. Chair doesn't budge an inch!
Nice work! After finally making the jump to salt, I've become a firm believer in fighting butts. I gave a little thought to something like what you've done here, but I finally decided that I'm too lazy and ended up buying a bunch of rubber chair / table leg stoppers like THIS. They do fine once you find the right size - if nothing else they keep your end caps from getting scratched up.
Yes....I put one on my 2wt. So there.
Add these for the back wheels :)
https://www.amazon.com/WEWGO-Stoppers-Furniture-Cups-Pack/dp/B07QB6D68B/ref=sr_1_4?crid=2V6BMJ470ID7W&keywords=wheel+stopper&qid=1574824829&sprefix=wheel+stop%2Caps%2C214&sr=8-4
I bought both the 1-1/4 and the 1-1/2 to experiment with. If you go with the slightly smaller size, you have the option to 'upgrade' the peg with these end caps.
Shepherd Hardware 9226 1-1/2-Inch Rubber Leg Tips, 2-Pack https://www.amazon.com/dp/B001HYVWQO/ref=cm_sw_r_cp_apap_kIso2zU6EeOfr
Esthetically looks a bit better imo + prevents the creepy crawlers from settling in and calling your new weight rack home.
https://imgur.com/gallery/Aul2M
Get some of those rubbery-pad things for the feet, they look like they're going to bore into your carpet/rug.
Like these... https://www.amazon.com/Adams-Manufacturing-4300-99-3340-Caster-Protectors/dp/B00DWX5AUW
You need some cups, my piano came with a set. Similar to these - https://www.amazon.com/dp/B077RX7PGS/ref=cm_sw_r_cp_api_B7tEAb8P3YPZY :)
i would get some furniture moving coasters/pads to put under the fold out legs. Id be afraid of wearing holes/scratching up the floor!
Something like this
https://www.amazon.com/CasterMaster-Designed-Linoleum-Furniture-Indentations-Protect/dp/B018H0NDRG/ref=sr_1_5?crid=1IAPZ2P9CORP0&keywords=furniture+coasters+for+wood+floor&qid=1563669566&s=gateway&sprefix=furnature+coas%2Caps%2C158&sr=8-5
You could also get something like this, there are also little stopper things that go under the wheels if you don't want to replace them
I picked these up and they work very well. Only need to use 2 and my chair goes nowhere at all.
​
https://www.amazon.com/Slipstick-CB840-Furniture-Gripper-Caramel/dp/B000X8X58S/ref=pd_bxgy_60_img_2/135-5530433-3182138?_encoding=UTF8&pd_rd_i=B000X8X58S&pd_rd_r=4528ba1a-682b-11e9-a637-6b060766031a&pd_rd_w=VhqP0&pd_rd_wg=9010w&pf_rd_p=a2006322-0bc0-4db9-a08e-d168c18ce6f0&pf_rd_r=N54Q9KEB0YYEVBKB599S&psc=1&refRID=N54Q9KEB0YYEVBKB599S
They make things like... this to put under the wheels of furniture to keep them from rolling. Look into something like that, because as is, I would spaz somehow during a game and roll right off the edge.
I would call it a round foot insert. Something like this: https://www.amazon.com/Round-Insert-Chair-Glide-Protectors/dp/B074HWW73N
Adam Hall Hardware 4903 M8 AH - 8er Set Gummifuß 20 x 9 mm schwarz im Beutel https://www.amazon.de/dp/B01AUWFNGS/ref=cm_sw_r_cp_api_HqyFzbTBXZYNK
These work very well too, I use them for both flight sim and sim racing.
These work surprisingly well to stop skidding:
https://www.amazon.com/dp/B00HJVK51M/ref=cm_sw_r_cp_apa_i_9P-iDb04NME0J
Hey, there is this new thing on the market, that people are doing speaker isolation making them "move" freely when they are playing. Effectively cancelling the high pitch frequency vibration within the electronical components. You know, cancelling the vibration by movement.
Three concave cups in threes under a speaker, in the cups are 1/2 inch steel balls. Or marbles.
Try these for a change. https://www.amazon.com/dp/B000YB9RV8/ref=twister_B00S82IH3Y?_encoding=UTF8&psc=1
more info here.
https://www.stereophile.com/content/seriously-good-isolation-your-system-no-expensive-high-end-racks-bits-bobs-needed-1
I'm not going back to the old now. In that thread is Barry Diament which speakes for the 2 techniques, inner tube and roller blocks. You can email him too.
Just look up "chair socks" on Amazon.
These are the ones I bought
Another style
How important is using the wheels for you?
I personally dislike it and use these.
There are non-replacement versions as well.
Something like this: Bed Stopper - Install Requires "No Lifting" of Your Bed - by iPrimio https://www.amazon.com/dp/B01LD7GZES/
Or this: Slipstick CB840 3-1/4 Inch Bed Roller / Furniture Wheel Gripper Caster Cups (Set of 4) Caramel Color https://www.amazon.com/dp/B000X8X58S/
https://www.amazon.com/SoftTouch-Furniture-Caster-Carpeted-Surfaces/dp/B000PAYZ4W/ref=sr_1_2?s=hi&ie=UTF8&qid=1482993751&sr=1-2&keywords=furniture+leg+cups
http://amzn.com/B000X8X58S
Consider looking into squeegees: https://www.amazon.com/Remington-SQUEEG-Caliber-7-62-mm-Gauge/dp/B004NKSMZI
wheel caster cups https://www.amazon.com/gp/product/B000X8X58S/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B000QY7VWA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Non-slip base to put under wheeled furniture.
Also called caster cups.
Get a set of wheel stoppers https://www.amazon.com/dp/B000X8X58S/ref=cm_sw_r_cp_apa_RkZFzb83J5PSB
This is the gripper
tried these? http://www.amazon.com/Slipstick-CB840-Furniture-Gripper-Caramel/dp/B000X8X58S
Can just get some of these if you don't want to mess up your shoes https://www.amazon.com/Slipstick-CB845-Furniture-Gripper-Chocolate/dp/B000QY7VWA/ref=sr_1_2_sspa?keywords=caster+cups&qid=1551293523&s=gateway&sr=8-2-spons&psc=1
That's what I used to use with my office chair, before I got a proper rig.
Airflow is a game changer, even if you don't use a fan. See if you can get space between modem/FW/SW.
https://www.amazon.com/dp/B000KKVPR2/ref=cm_sw_r_cp_awdb_t1_sT83AbE5CRDGW
Three years ago, I bought these to stop my office chair from rolling while braking. I'm still using them without issue.
I use these with my racing setup: http://www.amazon.com/gp/product/B000X8X58S/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1944687642&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B000XXQULC&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0AJ2V3NY0V1PK3AR577S
Don't use them with my rudder pedals though, CH Pro Pedals require light enough pressure that my chair doesn't move.
Another DiY option - using a power drill. Made it myself using these leg tips, purchased from Amazon. I found rolling the paint less of a mess than shaking them as shown here.