Reddit mentions: The best utility racks
We found 138 Reddit comments discussing the best utility racks. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 52 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. ClosetMaid 3456 Large Shelf, White
- Stack extra tiers of dishes, canned goods or containers in kitchen cabinets with this versatile shelf
- Maximizes counter or cabinet space
- Measures 5.7" H x 16.3" W x 8.4" D
- Material: Epoxy coated steel
- No assembly required
Features:
Specs:
Color | White |
Height | 5.675 Inches |
Length | 16.25 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.427 Pounds |
Width | 8.375 Inches |
2. Racor - PHL-1R, Garage Ceiling Storage Rack Lift
- Adjustable - Mounts to any ceiling, adjust to angle ceilings with the built in nylon rings
- Durable - High strength steel allows you to lift up to 250 pounds
- Efficient - Raises and lowers by crank and includes all installation accessories
- Reliable - Steel cables allow for 8ft of vertical lift and securely locks into place
- Reclaim Your Garage - 16 sq feet of additional overhead storage space with the 4 ft X 4 ft design, making more room for the things you want to do
Features:
Specs:
Color | Black |
Height | 7 Inches |
Length | 51 Inches |
Size | Pack of 1 |
Weight | 47.95 Pounds |
Width | 20 Inches |
3. YYST Clear Light saber Wall Mount Wall Rack Wall Holder - Hardware Included.
- Patented Product for keeping lightsaber vertically displayed.Quantity : One clear blade holder , one wall mount clip. Hardware included.
- Clear - Both the blade holder and the wall mount clip are clear. Does its job without being visually obtrusive. Before installing , Please peel off the white film of the acrylic , which protects the acrylic from scratches. Then you will see very clear acrylic.
- Easy to take in and take out - Put your light saber into the blade holder and push the tip into the wall mount clip.
- Light Saber not included. 5 Pounds - the blade holder is very thick, which withstands up to 5 Pounds.
- Screw Covers included - the screw covers are provided to hide your screws.
Features:
Specs:
Color | Clear |
Size | X |
Weight | 10 Pounds |
4. Edsal URWM184872BK Black Steel Storage Rack, 5 Adjustable Shelves, 4000 lb. Capacity, 72" Height x 48" Width x 18" Depth
- Storage rack with 5 adjustable shelves and a 4,000 lb. capacity is suitable for organizing and storing items; Shelf Weight Capacity: 800 Pounds
- Shelves are made of particle board supported by double-riveted beams and braces, and adjust in 1-1/2" increments to accommodate items of varying heights
- Frame is made of steel for strength, frame has smooth black finish for resistance to corrosion
- Rivet lock design for assembly without nuts or bolts, instructions included, tools for assembly sold separately
- Two-piece post design allows assembly as a single 72" high unit or two 36" high units; Center shelf connects top and bottom posts for stacked setup
- What's Included? 8 posts, 10 braces, 10 beams, 5 shelves; Post couplers NOT INCLUDED
Features:
Specs:
Color | Black/Sand |
Height | 72.04724402 Inches |
Length | 48.03149601 Inches |
Number of items | 1 |
Size | 72" Height x 48" Width x 18" Depth |
Width | 18.1102362 Inches |
5. Greenpro 3309 Wall Mount Hardware and Craft Storage Cabinet Drawer Organizer
Made of durable polystyrene strong frame with non-breakable translucent drawers!.Perfect for storing hardware, crafts, sewing supplies etc. within hands reach.Can be wall mounted, includes necessary hardware, or can be stacked on a table.Drawers are clear to enable to view contents. Drawers also fea...
Specs:
Height | 18.37 Inches |
Length | 15 Inches |
Number of items | 1 |
Width | 6.24 Inches |
6. Whitmor Supreme Stacking Shelf and Organizer - Adjustable - Chrome
- Great storage solution for office, laundry, kitchen, garage and more
- Commercial grade heavy-duty chromed steel has 200 pounds shelf load capacity
- Steel shelf adjust in 1-inch increments to accommodate various sized items
- Assembled Dimensions: 14 L x 15 W x 15 H inches
- Easy assembly with no tools required
- Multiple shelves may be stacked for a classic, modular build-out
- Includes a 10-year limited warranty
- For over 70 years, Whitmor has been bringing organization home. If you have questions or problems, please contact us for immediate assistance
Features:
Specs:
Color | Chrome |
Height | 15 Inches |
Length | 14 Inches |
Number of items | 1 |
Size | Small Stacking Shelf |
Weight | 3.6 Pounds |
Width | 15 Inches |
7. Storage Drawers-30 Compartment Wall Mount Organizer Bins- Easy Access Compartments for Hardware, Nails, Screws, Beads, Jewelry, and More by Stalwart
- SIMPLE MOUNTING - Hang the black peg panel board base virtually anywhere in your garage, craft room, or workshop thanks the flat, streamlined design. The special design lets bins sit on the board in various configurations for custom garage storage.
- EASY ACCESS - Each storage bin has an open design, so you can reach in to grab what you need without removing it from the peg panel board. These organizer bins also remove and attach to the peg panel board seamlessly for fuss-free loading and unloading.
- NUMEROUS USES - Use these wall mount organizer bins in numerous areas of your home or business. These home improvement essentials work well for garage organization and craft storage and make a great choice for workshops as nail organizers and storage.
- DURABLE DESIGN - Trust in the tough plastic construction to help these workshop, craft room, and garage storage organizer bins to effortlessly endure frequent handling. The smooth surfaces allow fuss-free wipe-downs for easy cleanup as needed.
- PRODUCT DETAILS: Material: Plastic. Dimensions: Overall: (L) 25.25" x (W) 14.875" x (D) 7.125"; Black Peg Panel Board: (L) 25.25" x (W) 14.875" x (D) 0.625"; 18 Red Bins: (L) 3.875" x (W) 3.625" x (H) 2"; 12 Blue Bins: (L) 4" x (W) 6.375" x (H) 2.875".
Features:
Specs:
Color | Multicolor |
Height | 7.125 Inches |
Length | 25.25 Inches |
Number of items | 1 |
Weight | 6.34 Kilograms |
Width | 14.875 Inches |
8. Reliable Hardware Company RH-20-SRR-A Rack Rail
Rack Space: 20UDimensions: 1. 55'' x . 68'' x 35. 00'' LongThreads: 10-32Material: 11 Gauge (1/8" thick) Cold Rolled SteelFinish: Black Powder Coat
Specs:
Color | Black |
Height | 1.75 Inches |
Length | 35 Inches |
Number of items | 1 |
Width | 0.75 Inches |
9. Berry Ave Broom Holder and Garden Tool Organizer Rake or Mop Handles Up to 1.25-Inches, Small, Black
- FROM MESS TO HOME DECOR - If you have cleaning supplies taking over your bathroom, kitchen, or garage shelving, declutter with this storage organization system you will want to show off to your guests!
- INDOORS OR OUTDOORS - Tidy up your broom, mop, rakes, tools and more! Perfect for the kitchen, closet, garage, office, great for commercial use, and thanks to the weatherproof design, this holder even works outdoors or on the shed for your garden tools!
- NO-SLIDE - Commercial grade hanger with 35 pound holding capacity! Thanks to the spring loaded, double rubber gripped slots, whether wet mops, dirty rakes or baseball bats, we nothing slips, or your money back.
- RIDICULOUSLY EASY INSTALL - Included with broom holder are all the screws and anchors needed to mount securely, along with clear step-by-step instructions and video that allow even the clumsiest of us can install easily in just minutes!
- 100% THRILLED CUSTOMER - We stand behind our products and service. Introducing our 100% THRILLED , no questions, no limits, no hassle. Just click "Add to Cart" now!
Features:
Specs:
Color | Black |
Height | 2.25 Inches |
Length | 15.5 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 0.5 Pounds |
Width | 4.25 Inches |
10. Whitmor Supreme Wide Stacking Shelf - Heavy Duty - Adjustable - Chrome
- Great storage solution for office, laundry, kitchen, garage and more
- Commercial grade heavy-duty chromed steel has 200 pounds shelf load capacity
- Steel shelf adjust in 1-inch increments to accommodate various sized items
- Assembled Dimensions: 14 L x 30 W x 15 H inches
- Easy assembly with no tools required
- Multiple shelves may be stacked for a classic, modular build-out
- For over 70 years, Whitmor has been bringing organization home. If you have questions or problems, please contact us for immediate assistance
Features:
Specs:
Color | Chrome |
Height | 15 Inches |
Length | 14 Inches |
Number of items | 1 |
Size | Wide stacking Shelf |
Weight | 3 Pounds |
Width | 30 Inches |
11. Smart Design Over The Door Adjustable Pantry Organizer Rack w/ 6 Adjustable Shelves - Large 58 Inch - Steel Construction w/ Hooks & Screws - for Cans, Food, Misc. Item - Kitchen [White]
[OVER DOOR ORGANIZER] Securely hangs over door & can be mounted to doors w/ included hooks & screws.[PATENTED] Includes 6 adjustable shelves that can be mounted separately w/ included hooks & screws.[SMART DESIGN QUALITY] All Smart Design products undergo stringent quality assurance & control.[24/7 ...
Specs:
Color | White |
Height | 61 Inches |
Length | 17 Inches |
Number of items | 1 |
Size | 6-Tier |
Weight | 6.83 Pounds |
Width | 7 Inches |
12. Seville Classics Commercial 7-Tier NSF 16 Bin Rack Shelving, 36" W x 14" D x 56" D
Dimensions: 14" D x 36" W x 56" H7-Tiers with 16 bins and 4 casters (2 locking), shelves adjust at 1 inch incrementsCertified by the NSF to NSF/ANSI Standard 2 - Food Equipment for use in dry environments16 slide-out polypropylene bins with locking feature. Includes 16 bin labels and 4 Bin DividersT...
Specs:
Color | Grey |
Height | 56 Inches |
Length | 14 Inches |
Number of items | 1 |
Size | 16 Bin |
Weight | 4.64 Pounds |
Width | 36 Inches |
13. Bora Wood Organizer and Lumber Storage Metal Rack with 6-Level Wall Mount – Indoor and Outdoor Use, In Orange | PBR-001
- PERFECT FOR STORAGE: Store all your building supplies without taking up too much space in your garage, basement, shed or outdoor workspace. This is a very strong storage solution for lumber, firewood, gutters, sheet metal, PVC, pipes, ladders, skis, snowboards, golf clubs, construction tools, old rugs and more!
- WALL MOUNTED: Our storage saver is easy to install on the walls of your garage or workshop to increase your storage space. Keep your workbench area well organized with this great space-saver for your home or business. Dimensions are 41” height x (up to) 72” wide x 12 ½” shelf depth.
- WEIGHT CAPACITY OF 600 LBS: Quality industrial storage equipment holds a significant amount of weight, which is why each shelf holds up to 110 lbs – that’s a 600-pound weight capacity for all six shelves! Store all those heavy boards or logs with the assurance that your organizer can handle the weight.
- 6 LEVELS OF STORAGE: Configure the PortaMate PBR-001 wood organizer to fit your storage needs. Use the first few tiers as a wood and pipe rack and add wooden boards to the others to instantly increase shelf space!
- HEAVY-DUTY CONSTRUCTION: Our lumber shelving is made from powder-coated 1-inch steel tubes making it extremely strong. Count on this to last for years and years of storage use.
Features:
Specs:
Color | Orange |
Height | 2.999999997 Inches |
Length | 41.99999996 Inches |
Number of items | 1 |
Weight | 0.000625 Pounds |
Width | 3.999999996 Inches |
14. Erie Tools TLPB60 60 Parts Bin Shelving Organize with Plastic Bins for Garage, Shop, and Home Storage
- 60 flexible, plastic parts bins. *Bins do NOT include dividers*
- Features 11 shelves (including top).
- Organize nuts, bolts, screws, washers, fasteners, etc.
- 400 lbs. capacity.
- Built with 22-gauge steel.
Features:
Specs:
Height | 38 Inches |
Length | 18 Inches |
Weight | 65 Pounds |
Width | 15 Inches |
15. Origami R5-01 General Purpose 4-Shelf Steel Collapsible Storage Rack, Large
General purpose. 4 shelves.Material: powder coated steelOpens and folds in 20 secondsNo assembly required. Dimensions: 35.8" x 20.85" x 60"Shelf capacity: 250 lbs per shelf on level surface evenly distributed. Great for use in the garage, office or warehouse.
Specs:
Color | Pewter |
Height | 60 Inches |
Length | 36 Inches |
Number of items | 1 |
Size | Large |
Weight | 45 Pounds |
Width | 20 Inches |
16. MyGift Black Metal Scrollwork Design Expandable Over-The-Sink Storage Organizer Shelf Rack w/Pull-Out Drawer
A freestanding kitchen rack made of metal and featuring a black finish and an elegant scrollwork design.The length of this rack can be adjusted as needed to best fit your space on the counter, pantry or over-the-sink.The hanging pull-out drawer is made of wire mesh with a metal frame and can be used...
Specs:
Color | Black |
Height | 13.75 Inches |
Length | 35.5 Inches |
Number of items | 1 |
Weight | 5.8 Pounds |
Width | 6 Inches |
17. Smart Design Over The Door Adjustable Pantry Organizer Rack w/ 6 Adjustable Shelves - Steel Metal - Hanging - Wall Mount - Cans, Spice, Storage, Closet - Kitchen [White]
[OVER DOOR ORGANIZER] Securely hangs over door & can be mounted to doors w/ included hooks & screws.[PATENTED] Includes 6 adjustable shelves that can be mounted separately w/ included hooks & screws.[SMART DESIGN QUALITY] All Smart Design products undergo stringent quality assurance & control.[24/7 ...
Specs:
Color | White |
Height | 58.99999993982 Inches |
Length | 16.749999982915 Inches |
Number of items | 1 |
Size | 6-Tier - 55 Inch |
Width | 7.249999992605 Inches |
18. Whalen 5 Tier 48'' (121cm) Step Beam Heavy Duty Storage Rack
Specs:
Weight | 114.64037624 Pounds |
19. Spoga Wall Mounted Mop, Broom, and Sports Equipment Storage Organiser
5-position wall organizer for handled tools. Holds Up To 11 ToolsRolling balls automatically adjust to each handle's thickness and grips it securelyEasy release by lifting the handleEach ball holds up to 7-1/2 pounds of weightCompact sizing and clean design
Specs:
Color | grey |
Height | 2.12 Inches |
Length | 17.5 Inches |
Number of items | 1 |
Width | 4.1 Inches |
20. Seville Classics Commercial 7-Tier Platinum/Gray NSF 22-Bin Rack Storage System
- Overall Dimensions: 14" D x 36" W x 56" H
- 7-Tiers with 22 PP Bins and 3" wheels (two locking)
- 22 Durable Sliding and Locking Polypropylene (PP) Bins (12 M, 6 L, 4 XL)
- Includes 22 bin labels
- Certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for home, commercial and and office environments
Features:
Specs:
Color | Gray |
Height | 56 Inches |
Length | 14 Inches |
Number of items | 1 |
Size | 22 Bin |
Weight | 60.25 Pounds |
Width | 36 Inches |
🎓 Reddit experts on utility racks
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where utility racks are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Hmm...essentials..
Picturing:
The backdrop I have is awesome, unfortunately I don't know what brand it is or where to get it, I just got it off Craigslist. It's molded plastic.
Lights - I think this is the exact one I bought and then just got those articulating arms that the lights are attached to from b&h.
Camera - Trusty Samsung Note 4 - Ive debated on and off forever on going to an actual camera but using a cell phone makes it just soo easy to upload everything to dropbox and have it all nice and organized. (I keep pictures of all items for at least 6 months after they've sold)
Shipping / Packaging etc..
Having an assortment of packaging materials and the correct tools makes shipping much easier and more pleasurable.
Box resizer - awesome little tool, since FedEx and UPS use dimensional shipping you can definitely save a lot of money by making the box the correct size for the item you are shipping.
Scale - Necessity for sure. (I don't have a link to mine specifically, but I'm sure any of these will work just fine)
Thermal printers - Again, definitely a necessity. My setup is probably not optimal but it certainly beats printing out labels on plain paper and cutting them out and taping them lol.
For FedEx I use the ZP505, for UPS I use the ZP450 and for printing out labels which I use to identify inventory I use a GK420d. All made by Zebra, all are quirky as fuck to set up, but all of them work well once they are going. For all other priting I have a bunch of Samsung SCX-3405W Laser printers. (cheap and easy, certainly much better than an ink jet)
For inventory or just in general having lots of shelving is huge. Keeping organized is a nightmare, so having adequate space to put everything is key. Things like this are also very nice to have.
I dunno what else.. Ask away if you have any questions.
Very simply: Use the posts for modular wire shelving. The legs can screw together, each is 14 inches long.
These shelving systems are sold everywhere under many different names with the same basic design. Smaller shelves have legs that are 3/4" in diameter with 1/4" screws. Larger ones are available with 1" diameter posts and 1/2" screws connecting them. Different post lengths are available but 14" is the sweet spot for a spreader bar.
The cheapest option I found was the "Whitmor Supreme Stacking Shelf Organizer" on Amazon. This has 4x 14" posts that are 3/4" in diameter for $12.65+shipping: https://www.amazon.com/Whitmor-Supreme-Stacking-Shelf-Organizer/dp/B0007MHD2E/
You can also buy just a set of the 1" posts here: https://www.shelving.com/SI-Chrome-Round-Post-Sets-p/si-pc-set-p.htm (Note that I haven't bought from there, I just googled it when looking for the cheapest option).
There are also tons more options that are basically the same overall design. I'm not trying to endorse any vendor (I'm not affiliated with any of them), just pointing out that these very common posts are perfect for turning into a spreader bar.
A pack of two 1/4" 20 threads per inch (TPI) 2 1/2" long eye bolts are available from Home Depot for $1.18 and they fit the Whitmor posts perfectly. You can easily screw them in by hand at the ends and in less than a minute you have a spreader bar with no tools necessary.
I bought two sets of two eye bolts, so I could use one post as a wrist bar, and the remaining three legs combine to form a 42" leg spreader bar as pictured.
The best part of this is that you can unscrew the legs again, collapsing the bar for storage to a length of only about 15" (with the end eye bolts in). This means that instead of having an awkward 3+ foot bar in my closet I can easily throw the set of 15" posts in a large desk drawer (though they are still long enough I have to put them in at an angle to make them fit).
One concern at first glance might be: "Wait, if the posts screw together so easily couldn't someone just easily unscrew them and get out of the spreader?" Answer: No. Maybe this is obvious to people who are not me, but it doesn't work this way provided you are attached to both the screw and what it is attached to. Take any two things that are screwed together. Then try to unscrew one from the other, never taking your hand off of either one. Go ahead and try. You can't do it. You'll end up trying to wrap your arms into a pretzel. Despite how easily it screws together, it's secure.
Hey Gara:
If you are looking for sturdy, wire shelves that require no assembly and are reasonably priced, check out Origami. Here is an example of one of their larger units which I own, and I have a smaller unit as well.
https://www.amazon.com/gp/product/B003KWKYOW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
These are awesome shelves, but I initially had a bunch of systems on the large unit with a TV on top, and I was never happy with it. It was too messy and the TV was too high. The smaller unit is pretty good to put 2-4 consoles and other stuff on, as well as a small CRT on top.
I ultimately settled on this cube-style setup, which I am extremely happy with (very sturdy, looks great, easy assembly).
https://www.amazon.com/gp/product/B0118EDD3C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
BIGGIE: Stop comparing yourself to others as you are a unique individual and everyone does things according to their uniqueness and skill level and that's okay. Also, everyone's uniqueness makes them more beautiful and interesting.
Hi. I purchased two of these tall sink shelves and zip ties them together. You may be able to fit two side by side. I even put small succulent pots in the baskets.
If you did something like this, you could also have hanging plants from
The ceiling if you desired.
I love these shelves, they are expandable and super sturdy.
Have a peek-
MyGift Black Metal Scrollwork Design Expandable Over-The-Sink Storage Organizer
https://www.amazon.com/dp/B015XN86H2/ref=cm_sw_r_sms_c_api_i_d-IxDb08N31VS
I also have a high faucet and it fits perfectly over mine, you may wish to check measurements if interested.
I hung a grow light, from the ceiling, over mine as well.
A magnetic strip might be useful in your situation
Found this on amazon.
I have one that is hung in my wall that was cheaper but figure this is easier for renting!
If you have a closet door that is close to the kitchen this would help free up some real estate on the “pantry” shelves for things like your eating utensils.
Also command hooks are a life saver for hanging pot holders and smaller pans.
Edit to add- post a pic when you get it all done I would love to see how you utilized the space!
Since you can't put the books standing up vertically, try stacking them horizontally but still organize by size so they're mostly in neat columns.
You would want to put trinkets and misc items in their own containers, where related items all go in the same bin, but laid out in a way so you can see all of them and access all of them without having to move things--so not just one box with stuff stacked up it in randomly, unless you absolutely can't avoid doing so (sometimes, throwing shit in a box is really the only thing you can do haha). I find trays (like the lid of a shoebox, for example of height) instead of boxes to be best for this. Trays would be a great set up for you, since you said your shelves are deep but not tall.
To maximize the amount of space you have, you can add mini shelving within a shelf. So for example, on that top shelf, I can see you have a mug or cup of some kind. You could fit tiny shelf there, something that stands on its own, like this, so you'd have the cup where it is now alongside some other stuff, and then on top of it you could place more cups or a tray of other stuff.
You can get trays from the dollar store, use a shoebox lid, or even just cut the bottom of a tissue box off. All my trays are basically the lids for "memory boxes" I got from Michael's. I use the boxes themselves as closet organizers.
>Things I’ve already thought about are making sure we have electrical outlets in areas that I’ll be putting cameras
This isn't needed if you get Power Over Ethernet (POE) cameras.. which you probably should be using anyway...
Lesse...
Table, chairs, box of pens, box of sharpies: ~$200 from staples, free delivery, your ass will thank you.
http://www.staples.com/Sudden-Solutions-6-Standard-Grade-Resin-Folding-Banquet-Table/product_749944
http://www.staples.com/Staples-Steel-Folding-Chair-Black-with-Luxura-Seat-4-Pack/product_886001
Amazon:
A fist-full of the cheap $1 philips and flathead screw drivers from home depot.
Monoprice: Pigtail adapters for your PDU's to go from c14 to 5-15R. Almost every electronic device these days is universal power (90-240v, 50/60hz.) The notable exception is your driver charger. Never order fewer than 5 of anything. 10 for ethernet cables. On that note, order 2x 50' ethernet cables, and 10 of every other length and color you might need. Some long micro usb cables for phone charging. $100 extremely well spent.
http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10228&cs_id=1022804&p_id=1302&seq=1&format=2
Pole-style crash cart. Your own crash cart is worth its weight in gold, and one you can't leave shit on is worth another weight in gold because it cannot get messy and junked up. $350? I forget.
All in all $1500 worth of stuff you will see once a year at best. However your on-site techs will never spend much if any time rooting around for tools. Do not travel with this stuff, buy one kit per colo site.
Also never let anyone tell you square-holed racks are bad. Order 1000 extra fasteners and nuts. This is on top of whatever you need to mount the stuff you know about. Only ever order one type. Throw away any fastener kits which come with your equipment because they might be slightly different. Remember 1000 fasteners is only 125 rack units assuming top, bottom, front, back, left, right. It's fewer still if you put in the center locking one. Have them toss in a cage nut tool, or learn to use a small flathead. Blood for the datacenter gods. Eventually you get extremely good at them and will stop cutting yourself.
Now off the reservation: Wifi router (buffalo) $80 prime, network printer (Brother, use the wired connection) $125 prime, ream of paper ($10, prime or staples).
cracks knuckles I am the organization queen.
Wall organizer 1
Wall organizer 2
Pantry organizer
Office organizer
Hair dryer caddy
Bed caddy
Under shelf caddy
Door organizer
Good luck with your new apartment, I hope you find what you're looking for. Thanks for the contest too :)
I get them from costco for around 65 bucs they are the whalen 5 tier industrial shelves. I loved that they were large, cheap, and they were solid wood shelves not wire. Oh and they easily dissemble flat making moving super easy if you move alot.
Here is a pic of them on amazon i can't find them them on costco website.
http://www.amazon.com/gp/product/B00H1Y4S5G/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00H1Y4S5G&linkCode=as2&tag=survivehive07-20&linkId=GDJEK75LWNIOAP5N
As to Voltron it's the 2 player voltron monsterpocalypse from privateer press.
https://boardgamegeek.com/boardgame/67426/monsterpocalypse-voltron-defender-universe-battle
A total of 7 separate orders. It was a bit annoying because I was mostly on my phone and the mobile apps/chrome wouldn't load properly. Also I would have preferred to bundle orders but oh well. or try to use more coupons but they only give you so many minutes in the cart and sometimes the next item that you're waiting for a deal to start is right outside that window.
I used the Visa30 coupon for above.
Spoga Mop, Broom and Sports Equipment Organizer Wall Mount - $10
I missed out on the $50 gift card because I didn't have the physical credit card with me and it asked for the full card number. I also wanted this Anker BT Speaker but it went pretty fast and everytime the waitlist message popped up on my phone the app was too laggy and I couldn't get it in the cart. oh well.
edit: bargh! just realized i needed a smaller UPS of which there was a cyberpower one on sale. d0h!
They look like they're just garage shelving painted black. Something similar to this with black shelves. Actually pretty cost effective and very good looking.
These in particular are really cool because you break them in half to do a double wide half height set up.
I like everyone's idea on shelving. But the best money I ever put into the business was ordering these: http://www.amazon.com/Seville-Classics-Commercial-7-Shelf-Certified/dp/B0041L4R4O/ref=sr_1_13?ie=UTF8&qid=1426802356&sr=8-13&keywords=parts+shelves
Fantastic, sturdy shelving. And if you don't want to buy a magnetic mat, then go to Home Depot and buy some magnetic rolls (like tape) and glue them down to your desk or work bench. I use a cutting board (yes, the ones you use in the kitchen) with a ESD mat on it, and magnetic strips down the right hand side numbered 1 through 24. Each time I take out a piece of the phone, it's set on the strip with the screws.
Magnetic tape: http://www.amazon.com/Master-Magnetics-07019-Flex-Magnet/dp/B000BQL8E0/ref=sr_1_1?ie=UTF8&qid=1426802508&sr=8-1&keywords=magnetic+tape
Cutting Board: http://www.amazon.com/Da-Vinci-Natural-Cutting-thickness/dp/B00MMMUI74/ref=sr_1_47?s=kitchen&ie=UTF8&qid=1426802671&sr=1-47&keywords=cutting+board
ESD Mat: http://www.ebay.com/itm/Green-Desktop-Anti-Static-ESD-Mat-12-x-16-For-Phone-PC-Tablet-Repair-/390826155199?pt=LH_DefaultDomain_0&hash=item5aff0ddcbf
_____
HERE IS AN IMAGE OF WHAT THE CUTTING BOARD LOOKS LIKE, THE WHITE IS MAGNETS, THE BROWN IS THE BOARD, AND THE GREEN IS THE ESD MAT
I got this and love it. The adjustable height is nice, although I've left it on the highest level because that's what works best for me.
Also, check out /r/robobrew and the Facebook groups if you haven't already!
Lol damnn I think I’ll stick with what I have! This thing cost me $15 and by just putting something at the back to raise it up an inch or two all the water runs to the front.
Camco 20762 30"OD x 28" Washing... https://www.amazon.com/dp/B00EOX2KZ2?ref=ppx_pop_mob_ap_share
I also have two of these wire shelf things which make a perfect drain rack just high enough to slide the drain pan under
Whitmor Supreme Wide Stacking... https://www.amazon.com/dp/B0007MHD24?ref=ppx_pop_mob_ap_share
Best accessory I've bought the for the Jeep.
It's a Racor storage lift that uses any drill to lift it up. It's badass how well it works.
I loop ratcheting straps around the hardtop, and hook them into the platform. Then I get my drill and lift it right off, kinda like this.
Mint, rosemary, and basil are standard easy herbs.
For a dead-simple setup, you can buy 2 of these and two of these and clamp/hang them about 1 ft above the tops of your herbs. Then put a couple pots on/under a wire shelf like this.
I like these kinds of installations because there's really no "building" and they can be moved around easily. Metal wire shelves are also very versatile so you can reconfigure/repurpose them as needed.
I have this for my JL hard too and it’s absolutely amazing. Best part is that you can use it for storage as well. It uses an electric drill to raise and lower it.
Racor - Ceiling Storage Heavy Lift - Up to 250 lbs https://www.amazon.com/dp/B0009I8AO6/ref=cm_sw_r_cp_api_i_ToQ3Cb5XV7RRF
You will never have enough storage :-). I use wall mounted bins like this for common parts, storage boxes like this for resistors, caps, etc., and a variety of other things like losthiker posted for LEDs and other small parts. I have some big drawers (made out of wood wine cases I pick up at wine stores) for mid-sized things, too.
I use a Racor Storage Lift as a lift and it works pretty well; I replaced the metal cage with a couple 2x4s then just run tow straps to connect the top. There's no balance issues. Nice creeper head.
I use this here. I didn't stack them though, so I have the 2 halves side by side like this.. It's really nice to have the surface for brewing and tinkering around in the garage. You could get 2 and have a high shelf if you wanted as well.
I just got one of these and it is awesome, probably buying like 3 more.
http://www.amazon.com/gp/product/B0009I8AO6?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
You could add your own shelf perhaps:
https://smile.amazon.com/ClosetMaid-3456-Large-Shelf-White/dp/B00AES2XB2/ref=sr_1_4?keywords=cabinet+shelf&qid=1556837726&s=gateway&sr=8-4
then use these caddy things to store your supplies:
https://smile.amazon.com/mDesign-Plastic-Portable-Organizer-Bathroom/dp/B0765CQ9Q4/ref=sr_1_41?keywords=clear%2Bbin&qid=1556837938&s=gateway&sr=8-41&th=1
I don't know exactly how much space you have but these things are bomb too:
https://smile.amazon.com/Simple-Houseware-Stackable-Sliding-Organizer/dp/B078YZ2Q85/ref=sr_1_3?keywords=under+cabinet+drawer&qid=1556837681&s=gateway&sr=8-3
​
Good luck!!!
I use something called a tool organizer. They look like this https://www.amazon.com/Berry-Ave-Broom-Holder-Organization/dp/B01DI8H364/ref=mp_s_a_1_9?ie=UTF8&qid=1525034121&sr=8-9&pi=AC_SX236_SY340_FMwebp_QL65&keywords=tool+rack&dpPl=1&dpID=51PWRVBlm3L&ref=plSrch
If you are curious what it looks like with kendamas on it, here is a video of mine https://giphy.com/gifs/kendama-fxC8ZYL23UNLwuLHup
I don't have one but it gets very good reviews on Amazon.
http://www.amazon.com/HTC-PBR-001-Portamate-Storage-Organizer/dp/B004DGIZMW
Looks great! What I think you could add for the little things is buy an over the door shelf. It’s so great!
It made a difference in my home, especially with the cans & little items.
Smart Design Over The Door Adjustable Pantry Organizer Rack w/ 6 Adjustable Shelves - Large 58 Inch - Steel Construction w/ Hooks & Screws - for Cans, https://www.amazon.com/dp/B00683MM9K/ref=cm_sw_r_cp_apip_mf4U4GjJgTWBv
I found that the little wire shelves that you can get to double your pantry or shelving area are nice. https://www.amazon.com/ClosetMaid-3456-Large-Shelf-White/dp/B00AES2XB2/ref=sxin_0_ac_d_rm?ac_md=0-0-c2hlbGYgZXh0ZW5kZXI%3D-ac_d_rm&keywords=shelf+extender&pd_rd_i=B00AES2XB2&pd_rd_r=9e863b24-afce-4f4c-b042-dad654d80771&pd_rd_w=Fvxud&pd_rd_wg=jLiMQ&pf_rd_p=983984df-2ad2-4c97-ba7f-4c5a90291c2b&pf_rd_r=QBSJYQSPZW1V99XPX4NY&psc=1&qid=1569685004&s=gateway
Lazy susans for canned good, spices, medications, you can get lazy susans with two shelves, and those are nice for smaller items. https://www.amazon.com/dp/B0036OQWT0?aaxitk=C04aQKaeELS.5S8eGrb3QA&pd_rd_i=B0036OQWT0&pf_rd_p=44fc3e0f-4b9e-4ed8-b33b-363a7257163d&hsa_cr_id=4348174040901&sb-ci-n=productDescription&sb-ci-v=Copco%202555-0187%20Non-Skid%202-Tier%20Pantry%20Cabinet%20Lazy%20Susan%20Turntable%2C%2012-Inch%2C%20White%2FGray&sb-ci-a=B0036OQWT0
Guaranteed if you have a lot of dishes, there are some you really never use. Pack those up and put them in storage somewhere, that way you are not throwing them away, if the wife is worried about that. You don't need 24 coffee cups, or bowls, for 3 people for daily use. Put stuff you only use once a year (christmas turkey roasting pan) in a plastic tote, and put it in the garage or basement. Better yet, if you have a kid who will be moving out in the next few years, start putting extra items in a tote for them to take when they move.
I recently moved, and like a nerd I mapped out my kitchen cupboards before I unpacked. Having things where you need them makes putting them away and finding them so much easier. Keep the coffee cups close to the coffee maker, the glasses near the sink, the spices close to the stove.
Ah, ok. My big batch (5g) brewing is on LPG. I have a 3-Shelf Gorilla Shelf (thanks, Craigslist) that I set up a tear down on brew day. Both burners have stands, and it sets up a nice little, collapsible, 3-tier system.
My smaller batches (1-2g) I do on the stove top, and as you said, extra hands would just get in the way.
Someone shared this one in another thread here that I had found and saved awhile back: https://www.amazon.com/dp/B07F58LXFP/?coliid=I7R5Z94PLFVYG&colid=29QA2M1G0U5WS&psc=1&ref_=lv_ov_lig_dp_it
Heh, they have the same shelves on Amazon for about the same price here:
http://www.amazon.com/URWM184872BK-Storage-Adjustable-Shelves-Capacity/dp/B00DSAAYM8/ref=sr_1_1?ie=UTF8&qid=1416032222&sr=8-1&keywords=edsal+shelving
There's a few different options for sizes. I only have one in my closet and that's all I have space for. I would love to get another one because it's usually full but I don't have much room for a second. I want to expand my inventory. There are plenty of things I see that I'd like to buy but I know I don't have the space for it all. :(
Forgot to add a top level post for the description.
I mostly used this guide - https://tombuildsstuff.blogspot.com/2014/02/diy-server-rack-plans.html?m=1
The 20U rails on Amazon - Reliable Hardware Company RH-20-SRR-A 20U Full Hole 20 Space Rack Rail Pair https://www.amazon.com/dp/B00JJ18OVS/ref=cm_sw_r_cp_apa_i_hPG7Ab276K7A2
The wheels on Amazon - Swivel Caster Wheels Rubber Base with Top Plate & Bearing Heavy Duty with Total Lock Brake Pack of 4 Black by Online Best Service (2.5" With Brake) https://www.amazon.com/dp/B01N45QP3Z/ref=cm_sw_r_cp_apa_i_0PG7AbTNSG1AW
The shelf on Amazon - AC Infinity Vented Cantilever 2U Universal Rack Shelf, for 19” equipment racks. Heavy-Duty 2.4mm Cold Rolled Steel, 100lbs Capacity. https://www.amazon.com/dp/B01C9L3K18/ref=cm_sw_r_cp_apa_i_LQG7Ab7SMH2JA
The wood I got isn't normal 2x4's, but instead 1 1/4 x 3 pine. It's the wood in the back of Home Depot that costs $20 per 8 foot board but worth it due to them being a lot straighter. I used 4 boards to complete this.
I used 2" Kreg screws with my Kreg Jig. The mounting depth for the rails is 21.5".
Rack is about 3.5' tall.
Equipment:
Netgate RCC-VE-4860
Unifi 24 (non PoE)
Unifi AC HD
Synology DS213+
Raspberry Pi 3
Storage and organization:
this I think is slightly too short for your needs -- but this might be a good starting place to start looking?
YYST Clear Light Saber Wall Mount Wall Rack Wall Holder - Hardware Included.[Amazon Clear Lightsaber Mount ]
https://www.amazon.com/dp/B07F58LXFP/ref=cm_sw_r_cp_api_i_PzgsDb55Y9FFN
The mount pictured.
For vertical to about 45 degrees. Clear mount.
YYST Clear Light Saber Wall Mount... https://www.amazon.com/dp/B07F58LXFP?ref=ppx_pop_mob_ap_share
I would suggest this one. You can put essential colors in the big ones (black, white, etc.) and other colors in the small ones. The small ones hold a bag of 1,000 perfectly, while the big ones hold around 4,000. I got mine for around $18 at Lowe's.
I bought this in grey a while ago and it’s the best thing ever.
Just got sent this link by a friend. I just bought a house with an 8' door so I can drive inside with the tent on (that was a requirement for any house I got). I was planning on building something to store the tent, but this is practically exactly what I was looking for anyway!
Figured a few people here might want the same thing.
*edit, and for those who can't see the facebook post, here is the amazon link!
https://www.amazon.com/dp/B0009I8AO6/ref=cm_sw_r_cp_apap_WMUcd1BDsfqBC
I grabbed two of these to cover an 8 foot area on my wall and they work great.
I just got this recommendation the other day and I think I'm going to buy a few for my next grow. They look great for a small grow with various sized plants.
https://www.amazon.com/gp/aw/d/B0007MHD2E
I only mount it when going on trips. Pully is a great idea. Here is one I'm looking at getting: https://www.amazon.com/Racor-PHL-1R-HeavyLift-4-Foot-Cable-Lifted/dp/B0009I8AO6/ref=s9_psimh_gw_g469_i1_r?_encoding=UTF8&fpl=fresh&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=&pf_rd_r=3NF3WKD5SFQTJVCSBVX7&pf_rd_t=36701&pf_rd_p=a6aaf593-1ba4-4f4e-bdcc-0febe090b8ed&pf_rd_i=desktop
Looks like the same one I got. I like it a lot.
Here's the link: https://www.amazon.com/gp/product/B07F58LXFP
This is my cheap alternative to a laptop stand. I’ve been using it for over a year now. And it’s fantastic.
I did quite a bit of research when looking for a solution and ended up with the cabinets. The other option I was looking at was something like this but for whatever reason ended up with the cabinets. I like them but there are some pieces that don't fit well. When we got them they came in one of these, completely unorganized. It was impossible to find anything.
What storage containers do you use (or have you used) for your various bits and baubles?
What were the advantages/disadvantages? I'm thinking of trying to standardize on just a few types of storage and don't want to back myself into a corner.
Just installed two of these, one in my kitchen and another in the garage. Really improved organization of brooms, mops, rakes, and all. It really grips and hangs on.... https://www.amazon.com/gp/product/B01DI8H364/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Something like this may not be a bad idea for handgun mags if you get one with enough bin depth.
> https://www.amazon.com/Greenpro-3309-Hardware-Storage-Organizer/dp/B073Q6GWPJ/ref=mp\_s\_a\_1\_12?ie=UTF8&qid=1535557986&sr=8-12&pi=AC\_SX236\_SY340\_QL65&keywords=screw+organizer
Really just get the same bins. You want them to be the same overall size so they stack next to each other nicely.
I just put THIS tutorial up. It can be made for under $50 if you have a drill at home & a way to cut wood at store or in home. If you're on a budget just get a Wire Shelf Rack, stick everything on a table w/ cards on top of rack & call it a day. If you have pets though they can easily knock the cards over so I'd go with a milk crate or something more substantial.
I ordered the mounts from Amazon. They work really well.
https://www.amazon.com/YYST-Clear-Light-Saber-Holder/dp/B07F58LXFP?ref_=ast_bbp_dp&th=1&psc=1
I used these rails from amazon. Didn't realize the original design used 2 sets of these but i don't have anything that needs a 4 post rack right now but i can add another set in the back if needed easily.
I built an angled rack for under my stairs for my homelab, using 2x4s and just the threaded rails I got off Amazon. Total cost, $63
14U for 4-post stuff, 8U above at the top/front for switch, router, and cable management.
20U Rails
14U rails
Got some old compaq swing arms off FleaBay for $18 so the two 4U boxes can extend on their rails while they're powered on.
This is what use to put mine on and off. Turns a tough, unsafe job into a piece of cake. I removed mine and put it back on once by myself, by hand. Never again.
https://www.amazon.com/gp/product/B0009I8AO6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
More of a storage option but could be used as display as well. I have 2 of them. This size will hold ~80 pairs in boxes.
Edsal URWM184872BK Black Steel Storage Rack, 5 Adjustable Shelves, 4000 lb. Capacity, 72" Height x 48" Width x 18" Depth https://www.amazon.com/dp/B00DSAAYM8/ref=cm_sw_r_cp_api_sA2iyb7BH2BVG
This is the mount I used. Just three small screws/anchors to attach.
YYST Clear Light Saber Wall Mount Wall Rack Wall Holder - Hardware Included. https://www.amazon.com/dp/B07F58LXFP/ref=cm_sw_r_cp_api_i_.rl0DbXD5WFPH
Something like this:
https://www.amazon.com/dp/B073Q6GWPJ/ref=cm_sw_r_cp_apa_i_3t.FDbWH1BDN3
I happened across a wall mount similar to this (might be the same thing) for like $20 at Lowe's. It keeps all of my lumber up off the floor on one side of my garage.
Buy this shelf with bins, you can put stuff in the bins, like candy and stuffed animals.
Something like this https://www.amazon.com/ClosetMaid-3456-Large-Shelf-White/dp/B00AES2XB2/ref=sr_1_5?ie=UTF8&qid=1496006712&sr=8-5&keywords=cabinet+rack
If I were you, I would start with an ord bot rather than an I3. I have both, and the ord frame is much more rigid and easier to upgrade.
there used to be a 300x300mm heated bed from punacatt. From what I recall, it needed its own power supply. People built several 12"x12" ord bots by just swapping out two of the makerslide sections and one regular extrusion section.
If you look at the very large builds online (24"+), you'll see that most don't use a heated bed and have an enclosed build volume instead.
What I did was take a steel shelving unit and enclose the level that has my printer on it.
http://www.amazon.com/Boltless-Storage-Shelves-URWM184872BK-Capacity/dp/B00DSAAYM8/ref=sr_1_3?ie=UTF8&qid=1410545715&sr=8-3&keywords=steel+shelving
The lightsaber stand came with the Hasbro version lightsabers. There is wall mounts on amazon: https://www.amazon.com/YYST-Clear-Light-Saber-Holder/dp/B07F58LXFP/ref=mp_s_a_1_3?keywords=lightsaber+stand&qid=1572282611&sr=8-3
It’s a basic steel and particle board shelf from Amazon: Edsal URWM184872BK Black Steel... https://www.amazon.com/dp/B00DSAAYM8
I believe i got them off of amazon they were really cheap for the set
https://www.amazon.com/gp/product/B00JJ18OVS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
The rails I got with the servers... Not sure where you can buy them. If you mean the posts (I realized I made a typo in the album and I actually got sent 40u posts!), I got the 20u ones off Amazon - these ones: https://www.amazon.ca/gp/product/B00JJ18OVS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
I did something similar, and used these rails
You can get shorter ones if you only want to rack a few items. I just wanted some rails for my network equipment. My server could be rack mounted, but I just have it at the bottom on the rack, similar to yours.
I got my 20U rails from Amazon. $28.
https://www.amazon.com/gp/aw/d/B0007MHD24/ref=ox_sc_act_image_1_1_1?smid=ATVPDKIKX0DER&psc=1
Would this be good??
https://www.amazon.com/gp/aw/d/B07F58LXFP?psc=1&ref=ppx_pop_mob_b_asin_title
These are what I use with all my lightsabers even my son's Rancor elemental
I went with this solution. https://www.amazon.com/gp/product/B001O4A42K/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
http://www.amazon.com/Reliable-Hardware-Company-RH-20-SRR-Space/dp/B00JJ18OVS?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_search_detailpage
I use one of these to organize the large array of extra cables and parts all the restaurants, gas stations and other service companies I serve generate.
This little company does... https://www.amazon.com/dp/B00JJ18OVS/_encoding=UTF8?coliid=IJPLO5AFFSPC3&colid=WPA62QPGVPAQ
I have one of these commercial shelving racks, new, unopened in box. I bought two and only have room for one.
$100.
I used this: Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack https://www.amazon.com/dp/B0009I8AO6/ref=cm_sw_r_cp_api_Ja2-BbGGRE1X3
With slight modifications
https://i.imgur.com/fHKdKZx.jpg
https://i.imgur.com/2FcgbY2.jpg
I have a couple of these in my cabinets and I use one for plates and one for mugs.
https://www.amazon.com/dp/B07F58LXFP/ref=cm_sw_r_cp_awdb_t1_yfSEDbZY67G95
While I was Konmari-ing, I went on Amazon and ordered shelf dividers and boot storage things (like sticks that you put inside of the boot and it stores the boot upside down) and made a wishlist of other things. Fortunately, I don't pay for Amazon Prime, so when I was done organizing my closet a few days later, I realized I was able to organize my sweaters in old shoe racks that I no longer needed to fill with shoes and I ended up finding enough unneeded tissue paper I could use to stuff my boots and the boot organizer wasn't necessary. So I cancelled the Amazon order.
I organize my vanity drawer stuff in a pink fabric sectional organizer from Target. My closet shelf has some basket organizing using a mixture of The Container Store and Target. I bought one of these for my utility room.
Cost $0 because I was able to use what I already had. Edit--I did buy that utility organizer for $10.
Maybe use these types of shelves to use more vertical space? ClosetMaid 3456 Large Shelf, White https://www.amazon.com/dp/B00AES2XB2/ref=cm_sw_r_cp_apa_MSfjzbM87BN3W sorry about the link, on mobile
A 120 lbs tent
using this hoist.
I actually have no way to get up into the space above the ceiling.
I was going off this site, which says 1/4" for 3/8" lag bolts.
https://www.fastenermart.com/lag-bolts.html
Doubtful. I don't know what size of bolt you're using, but I have a bunch of lumber storage racks on stud walls in the shop. Capable of 100lbs per shelf, 600lbs total, they're fully loaded and no problems
I’d think you’d want something like thiscable lift . Don’t see any reason you couldn’t fix a DC motor to something like that, although of course you’ll need to figure out your torque/gearing requirements.
I wouldn’t recommend the all-thread approach, for a few reasons. First, all-thread is readily available but generally makes a poor leadscrew. Purpose-made leadscrews can be fairly expensive, and you’re talking about (presumably) 4 fairly long ones. Next, any kind of lead screw solution will require lubrication, which will quickly result in grease all over you, your bed, your van, etc., in addition to an extra maintenance item. Thirdly, you have to worry about keeping your 4 corners leveled, which requires coordinating multiple lead screws. Do you have multiple motors? Or are you going to run a belt drive from 1 motor to all 4 screws? Messy. Lastly, the screws would reduce your space savings, since they are always in place. With an overhead hoist, there’s no lost footprint when the bed is fully raised.