Reddit mentions: The best vibration isolation products
We found 71 Reddit comments discussing the best vibration isolation products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 25 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Diversitech MP4-E E.V.A. Anti-Vibration Pad, 4" x 4" x 7/8" Pack of 4
- [SIZE]: Rubber Mounts Male Thread Size : M3 x 6mm / M3 x 0.2" (D x L) ; Rubber Size : 8 x 8mm / 0.3" x 0.3"(D*H); Shore hardness (+/-5°):55 durometer; set of 4 pieces rubber Vibration Mounts
- [COMPACT AND STABLE]: Simple geometric structure design, rubber and carbon steel fasteners with shore hardness of 40-60 degrees, and advanced manufacturing process of internal of insert die can provide strong dynamic buffering performance and stability under the action of lateral (lateral) force.
- [DAMPING ELEMENT]: as the damping element of welding machine and other equipment, it can protect the normal state of the equipment and obtain a good working environment. The effect of damping and noise reduction is very obvious.
- [MORE PRACTICAL]: in equipment and instruments, it protects the machine from the interference of vibration and has good buffering capacity.
- [APPLICATIONS]: Gasoline generators, air compressors, welding machines, garage doors, flushing pumps, impact pumps, air conditioners, s, wall fans, washing machines, generators.
Features:
Specs:
Height | 4 Inches |
Length | 6 Inches |
Weight | 1 Pounds |
Width | 6 Inches |
Number of items | 4 |
2. Isolate It!: Sorbothane Vibration Damping Sheet Stock 50 Duro (1/8 x 12 x 12in)
Reduce Vibration in Sensitive EquipmentSuperior Vibration Absorbing UrethaneAbsorbs Upto 94.7% of VibrationEasy to Install – Can Be Cut to ShapeCommercial Grade Anti-Vibration PadProfessional Grade Ultra-Soft UrethaneWill Not Harden or Crack Over TimeNaturally TackyHigh Chemical ResistanceConforms...
Specs:
Height | 0.125 inches |
Length | 12 inches |
Weight | 0.25 pounds |
Width | 12 inches |
Size | 1/8 x 12 x12in |
3. Isolate It!: Sorbothane Acoustic & Vibration Damping Film 70 Duro (0.10 x 6 x 12in)
High Performance Ultra-Soft PolyurethaneException Acoustic Energy InsulationUltra Thin Film Fits Many Different Applications0.10" of Sorbothane Will Absorb up to 10 dBThickness Tolerance: +/- 0.015" Durometer: 70 Shore OO
Specs:
Color | Black |
Height | 0.1 inches |
Length | 6 inches |
Weight | 0.125 pounds |
Width | 12 inches |
4. 5pack NEMA 17 Steel & Rubber Stepper Motor Vibration Damper for CNC 3D Printer
APPLY FOR: Reducing the noise and vibration of stepper motors is its main purpose.STABLE AND SMOOTH: it can keep your printer working smoothly and stably and ensure your printer security.WIDE APPLICATION: Widely used for 3D printer fittings, especially suitable for CNC 3D printer stepper motor.REDUC...
Specs:
Height | 0.787401574 Inches |
Length | 5.511811018 Inches |
Weight | 0.1984160358 Pounds |
Width | 3.543307083 Inches |
5. Isolate It!: Sorbothane Acoustic & Vibration Damping Film 50 Duro (0.125 x 6 x 12in) - 1 Sheet
- High Performance Ultra-Soft Polyurethane
- Exception Acoustic Energy Insulation
- Ultra Thin Film Fits Many Different Applications
- 0.125" of Sorbothane Will Absorb up to 12.5 dB
- Thickness Tolerance: +/- 0.020" Durometer: 50 Shore OO
Features:
Specs:
Color | Black |
Height | 0.13 Inches |
Length | 6 Inches |
Weight | 0.375 Pounds |
Width | 12 Inches |
Release date | March 2017 |
6. JW Winco 351-8-8-M3-ES-55 Series GN 351 Rubber Type ES Cylindrical Vibration Isolation Mount with 1 Tapped Hole and 1 Threaded Stud, Metric Size, 8mm Diameter, 8mm Height (Pack of 5)
- Country of Origin : United States
- Fits: Honda: GX160 and GX200
- Specs: Honda code 3683349/4723144
- Part number: 351-8-8-M3-ES-55
Features:
Specs:
Weight | 0.02 Pounds |
Number of items | 5 |
7. EDEC Non-Window Tablet Faraday Bag - Signal Blocking, Anti-Tracking, Anti-Spying, 5G RF EMF Radiation Protection for Tablets, Cell Phones, Key Fobs and Credit Cards
- Forensic faraday bag designed for law enforcement digital forensics and military cell phone exploitation
- Large size bag: Put cell phones, GPS or tablets inside to block cell signals, satellite, Wifi, 5G, and bluetooth frequencies
- Proprietary ISOTech faraday fabric provides best in the industry signal shielding, you won't find better!
- High quality materials and construction protects faraday fabric and lengthens life of bag
- Radio frequency shielding spec: 70-82dB attenuation (final bag spec, not just base materials spec)
Features:
Specs:
Color | Tablet Non-Window |
Height | 9.5 inches |
Length | 16 inches |
Weight | 0.15 pounds |
Width | 0.2 inches |
Size | Tablet |
8. Clean Tools The Mini Absorber Synthetic Drying Chamois, 17" x 13" (Color may vary),assorted
Won’t scratch and safe to use on all finishesHandy storage tube is perfect for storage of your Mini-Absorber at home or on the goResistant to mold, mildew, and most chemicalsMachine washableProduct dimensions: 17-inch x 13-inchDries anything faster and easierHundreds of drying usesGreat as a towel...
Specs:
Color | Assorted Color |
Height | 2 Inches |
Length | 7 Inches |
Weight | 0.1 Kilograms |
Width | 3 Inches |
Release date | April 2005 |
Size | Single |
Number of items | 1 |
9. casa pura Anti-Vibration Pad - Rubber Vibration Isolator Mat | Matting for Washing Machines, Washers, Dryers and Appliances | Multiple Thicknesses & Sizes | 3/4" Thick - 24" x 40"
- Windows 10 Home 64-bit
- Intel Core i7-8550U 1.8GHz Quad Core Processor (Max Turbo up to 4GHz)
- 256GB SSD storage; 16GB memory; NVIDIA GeForce MX130 graphics with 2GB video memory
- 15.6" 4K Ultra HD touchscreen display with pen support
- 802.11ac Wi-Fi and Bluetooth 4.2 wireless; Built-in webcam with stereo speakers and microphone; 2-in-1 design with 360-degree hinge; Ports: (3) USB 3.1, USB Type-C, HDMI, SD Memory Card Reader and headphone/microphone jack
Features:
Specs:
Height | 0.8 Inches |
Length | 40 Inches |
Weight | 13 Pounds |
Width | 24 Inches |
10. Diversitech MP-4E Eva Anti Vibration Pad, 4 x 4 x 7/8"
Country Of Origin: United StatesModel Number: MP-4EItem Package Dimension: 8.5" L x 8.7" W x 6.0" HItem Package Weight: 8.6 lb
Specs:
Is adult product | 1 |
Height | 1 Inches |
Length | 4 Inches |
Weight | 0.33 Pounds |
Width | 4 Inches |
Number of items | 1 |
11. uxcell M3 Male Female Rubber Mounts, Shock Absorber, for Motor Generator Compressor Garage Reverse Osmosis Pump Impact Air Generator Car Bobbins, D8mmxH8mm 4pcs
- [SIZE]: Rubber Mounts Male Thread Size : M3 x 6mm / M3 x 0.2" (D x L) ; Rubber Size : 8 x 8mm / 0.3" x 0.3"(D*H); Shore hardness (+/-5°):55 durometer; set of 4 pieces rubber Vibration Mounts
- [COMPACT AND STABLE]: Simple geometric structure design, rubber and carbon steel fasteners with shore hardness of 40-60 degrees, and advanced manufacturing process of internal of insert die can provide strong dynamic buffering performance and stability under the action of lateral (lateral) force.
- [DAMPING ELEMENT]: as the damping element of welding machine and other equipment, it can protect the normal state of the equipment and obtain a good working environment. The effect of damping and noise reduction is very obvious.
- [MORE PRACTICAL]: in equipment and instruments, it protects the machine from the interference of vibration and has good buffering capacity.
- [APPLICATIONS]: Gasoline generators, air compressors, welding machines, garage doors, flushing pumps, impact pumps, air conditioners, s, wall fans, washing machines, generators.
Features:
Specs:
Height | 0.79 Inches |
Length | 0.79 Inches |
Width | 0.79 Inches |
Size | M3*6 D8*H8 |
12. JW Winco 351-20-15-M6-EE-55 Series GN 351 Rubber Type EE Cylindrical Vibration Isolation Mount with 2 Tapped Hole, Metric Size, 20mm Diameter, 15mm Height (Pack of 5)
Ergonomic plate design meant to assist individuals in guiding food onto utensils with the help of the curved wallFeatures a 1 1/2" vertical wall that helps guide food onto utensils, entry wall is 1/2" high and steadily increases upward with 3/4" rim for easy handlingPackage Length: 9.25"Package Widt...
Specs:
Weight | 0.03 Pounds |
Number of items | 5 |
13. 4 Rubber Vibration Isolator Mounts Male/Female 6-32 (7/16 Dia x Ht) 1/4 L Stud
- Mount Type: Isolator Mount/Ani-Vibration
- Male/Female 6-32 (7/16 Dia x Ht) 1/4 L Stud
Features:
Specs:
Color | Black |
Weight | 0.6875 Pounds |
Number of items | 4 |
14. JW Winco 351.1-38-25-3/8-55 Series GN 351.1 Rubber Cylindrical Vibration Isolation Mount with 2 Threaded Studs, Inch Size, 1.50" Diameter, 1.00" Height, 3/8-16 Thread (Pack of 5)
Country Of Origin: United StatesModel Number: 351.1-38-25-3/8-55Item Package Dimension: 8.99999999082" L x 5.399999994492" W x 1.39999999857199" HItem Package Weight: 0.85 lb
Specs:
Weight | 0.17 Pounds |
Number of items | 5 |
15. casa pura Anti-Vibration Pad - Rubber Vibration Isolator Mat | Matting for Washing Machines, Washers, Dryers and Appliances | Multiple Thicknesses & Sizes | 1/4" Thick - 24" x 24"
- STRONG RUBBER: This anti-vibration pad is made with 100% recycled rubber particles, compressed for maximum sound dampening
- MINIMIZE VIBRATION: Most washing machines are prone to vibrate and cause excessive noise during the spin cycle and potentially damaging the floor. casa pura rubber mats absorb vibration, reduce noise and prevent movement
- PROTECTIVE: When used underneath washing machines, air conditioning units, chillers, electricity generators, bench top machine tools, these vibration isolators help to prevent scratching floors and other surfaces
- MULTIPURPOSE: Our anti-vibration mats can also be used as a safety enhancing mat for gym flooring or as an anti-fatigue mat in the workplace, due to the soft granular rubber composition
- DURABLE: This rubber matting is fluid and oil resistant, as well as weather resistant. Temperature range: - 22 and + 212 degrees fahrenheit
Features:
Specs:
Color | Black |
Height | 0.2 Inches |
Length | 24 Inches |
Weight | 1.6 Pounds |
Width | 24 Inches |
16. Yowming NEMA 17 Stepper Steel and Rubber Vibration Dampers Shock Absorber for 3D Printer, CNC 2-Pack
- 100% Natural & organic, OMRI Listed. Each brick weighs 1.4 lbs
- High-grade coconut coir with low EC and pH levels
- Provides plenty of aeration and drainage, Contains only coconut pith and fibers
- Our coco coir products are organic, guaranteed to be very high quality and very low salt content. Very low level of EC is attained by repited washing with fresh water.
- 100% natural, renewable replacement for peat moss, rockwool & perlite
Features:
17. casa pura Anti-Vibration Pad - Rubber Vibration Isolator Mat | Matting for Washing Machines, Washers, Dryers and Appliances | Multiple Thicknesses & Sizes | 3/8" Thick - 24" x 24"
STRONG RUBBER: This anti-vibration pad is made with 100% recycled rubber particles, compressed for maximum sound dampeningMINIMIZE VIBRATION: Most washing machines are prone to vibrate and cause excessive noise during the spin cycle and potentially damaging the floor. casa pura rubber mats absorb vi...
Specs:
Height | 0.4 Inches |
Length | 24 Inches |
Weight | 1.6 Pounds |
Width | 24 Inches |
18. EDEC Non-Window Laptop Faraday Bag - Signal Blocking, Anti-Tracking, Anti-Spying, 5G RF EMF Radiation Protection for Laptops, Tablets, Cell Phones, Key Fobs and Credit Cards
- Forensic faraday bag designed for law enforcement digital forensics and military cell phone exploitation
- XLarge size bag: Put multiple cell phones, GPS, tablets or laptops inside to block cell signals, satellite, Wifi, 5G, and bluetooth frequencies
- Proprietary ISOTech faraday fabric provides best in the industry signal shielding, you won't find better!
- High quality materials and construction protects faraday fabric and lengthens life of bag
- 72+ dB attenuation from 100 kHz to 8 GHz
Features:
Specs:
Color | Laptop Non-Window |
Height | 13.5 Inches |
Length | 17.5 Inches |
Width | 2 Inches |
Size | Laptop |
19. 3B Scientific U56001 Vibration Generator, 0 to 20kHz Frequency
- Vibration generator creates mechanical waves with a frequency up to 20kHz to demonstrate oscillation and resonance
- Includes a 4mm socket and mounting pin for attaching accessories (sold separately)
- Holds a stand rod to demonstrate standing waves
- Plastic housing for durability
- Requires Power Function Generator U8533600-115
Features:
Specs:
Height | 6.5 Inches |
Length | 12.1 Inches |
Weight | 3.55 Pounds |
Width | 8.8 Inches |
Size | 0 to 20kHz Frequency |
Number of items | 1 |
20. 4 Pack of Anti Vibration Pads 4" x 4" x 3/8" All Rubber Vibration isolation pads
- Has a solid cross-ribbed design (3/8" thick)
- Made from high quality elastomeric materials
- Recommended maximum loading capacity: 50 lbs per square in
- Compounded for excellent resistance to aging, compression set & oil
Features:
Specs:
Color | Black |
Weight | 0.6172943336 Pounds |
Size | 4 Pack |
Number of items | 1 |
🎓 Reddit experts on vibration isolation products
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where vibration isolation products are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
The PSU case needs some love, too. It's like Creality shopped around for the loudest fans it could find, and that's what shipped with the Ender. Anyway, these two things make the PSU much better: https://www.thingiverse.com/thing:3384875 WellFan Noctua 60x25 remix https://www.thingiverse.com/thing:2967389 WellFan PSU case mod and for fun https://www.thingiverse.com/thing:2987473 cause, well, just cause (60mm fan guard) oh, and the fan: https://www.amazon.ca/gp/product/B009NQMESS/ref=ppx_yo_dt_b_asin_title_o07__o00_s00?ie=UTF8&psc=1
Heyyyyy, you've added a buck converter and have 12v now, time to change the main board fan! It's a noisy bugger too! It ends up being the same fan as what comes on the factory hotend cooler. Annoyinggggggggggg. Like a mosquito in my ear!!! https://www.amazon.ca/gp/product/B009NQLT0M/ref=ppx_yo_dt_b_asin_title_o07__o00_s00?ie=UTF8&psc=1 Noctua 40x10mm fans are bolt in replacements for both of those, if you don't want to change the hotend cooler. I could have used a 40x10 on the Hero Me cooler I used - but the 40x20 looks cooler.
This is the LED strip lighting I used, it was expensive though, and I'm sure you could find much less expensive alternatives. https://www.rpelectronics.com/55-7160w-0-led-strip-outdoor-ip65-white-1m.html (white and red! z-rail and top rail!)
I printed a handle, and really like it, but it won't work without some love. Instead of modifying the 3d model I'm probably just gonna heatgun it into the shape I need it to be. Currently, it hits the Y-axis rail. It's here, if you wanna take a stab at it: https://www.thingiverse.com/thing:3313306
The Z-axis stepper is by far the loudest - I'm going to try to see if I can make a damper work, like this: https://www.amazon.ca/gp/product/B07CL356J5/ref=ox_sc_act_title_3?smid=A28ZWXW3ZSVNZU&psc=1 ** disclaimer note: I haven't done this yet. I haven't received the dampers.
I printed a zillion links from this thing: https://www.thingiverse.com/thing:2920060 but didn't like the result after putting it all together. It motivated me to try and do something for cable management, though. I DID end up using a bunch of the start and end mounts, though, and cut off the link nubs. They worked super great for cable management.
I'm still not 100% happy with the cabling - I'm ordering these: https://www.amazon.ca/gp/product/B074GZFYM1/ref=ox_sc_act_title_2?smid=A23BY812APN9IU&psc=1 and will be trimming/cutting/hiding/wrapping them so it looks nicer. Don't get me wrong, it works fine the way it is, but I don't like that flat ribbon cable stuff. It's too... ugly. It's either these cables or I'm going to build my own, which I like doing anyway. This will be soon. I don't think it'll look much different, but I think individually wrapped cables running to the stepper motors would look cooler. More space-ship-ie.
There's probably more. For this list, there's another list like it of failed/ugly/discarded parts - it took some trial and error for sure. It's worth it though. I've actually printed more stuff for my printer than I have for projects I'm working on. 3d printing is so funny that way!
If you have questions, I'm happy to help :) I have pictures of all this if you need them. I haven't figured out imgur, but will add photos to this album as time goes on: https://photos.app.goo.gl/AEXNqvTXE5ZZhnhi8.
-Tunder
PS. Man this is a really big post. I didn't realize I did so many things. Rabbit hole, this thing is.
I am not sure, as I haven't tried either one, but I have ordered these for a similar issue. can't yet comment on how good they are, as they are still on their way to me. These appear more sophisticated, but as I said, I haven't yet tested them.
https://www.amazon.com/Diversitech-MP4-V-Anti-Vibration-Pack/dp/B00BVEMLR4/ref=pd_sim_60_5?_encoding=UTF8&pd_rd_i=B00BVEMLR4&pd_rd_r=099c2662-e9de-11e8-8e2e-49ff07944d9e&pd_rd_w=GtOIO&pd_rd_wg=eekSs&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=18bb0b78-4200-49b9-ac91-f141d61a1780&pf_rd_r=WA3WKQJD37F71YAJTE2G&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=WA3WKQJD37F71YAJTE2G
​
Moving your bed close to a support point (such as a structural wall) might reduce the vibrations you feel as well, as the vibrations will typically have the largest amplitude toward the center of the floor span. Finally, I suppose you could try also putting the anti-vibration pads under the posts of your bed. Unfortunately, it is impossible to guarantee that any of these steps will solve the issue, but they might be worth trying.
So, I like to listen to music (loudly) in my car, but as I increase the volume, certain sub bass frequencies will begin rattling the items in my glove compartment. This obviously becomes a nuisance during my morning/evening commutes.
My proposed solution is to line the glove compartment with a material designed to absorb low frequency vibrations. After some googling, I found a material called Sorbothane, which many people use for dampening low frequency vibrations.
Questions:
Note: my car is a 2-year-leased 2016 Honda Accord Coupe, so extensive/invasive solutions are unfortunately a no-go. Additionally, it does not have an actual subwoofer, just standard built-in speakers with fairly decent low-frequency response.
Many thanks in advance to anyone who can steer me in the right direction. Also, apologies for the lengthy post. Just wanted to get everything explained properly.
Yeah my motivation was storage. Sound dampening is a great idea! I stole the idea from someone on thingiverse who thought the same as you. They added vibration dampeners like the ones below, so I added them as well. I like to think it is quieter, which is why I am looking for something else to store underneath instead of replacing them with the original feet.
https://www.amazon.com/Diversitech-MP4-V-Anti-Vibration-Pack/dp/B00BVEMLR4?keywords=square+dampening&qid=1536604713&sr=8-15&ref=mp_s_a_1_15
Yeah, but people use a lot of different materials to do so. One of the best or most popular ones I think is Sorbothane. You can get individual sheets of it on Amazon. You just have to cut it to fit the shape of your case.
I learned about this stuff from another user. You may wanna buy something thicker but it works great. I love the case btw. Isolate It!: Sorbothane Acoustic & Vibration Damping Film 70 Duro (0.10 x 6 x 12in) https://www.amazon.com/dp/B0084EXWP4/ref=cm_sw_r_cp_apa_XWxEzb1JMVN91
Yes, I have one. Here's my post (with pics): https://redd.it/4ne1f9
The PCB & plate rest on a lip in the bottom half of the case. I was not happy when I got it assembled because there was a considerable amount of flex.
/u/axtran suggested that I use I sheet of Sorbothane between the PCB and the case. It worked great and the keyboard feels rock solid.
For the cable, I used a short DIY USB cable from 1UP Keyboards (/u/skiwithpete). I used cable ties to secure it to the PCB in a couple of places. The cable sticks out of the back of the keyboard for a couple of feet and I plug it into an USB extension cable.
I have vintage MX blacks in my Phantom and it's my favorite keyboard in my collection.
It's not common practice, but it should be.
It won't help a modern flight computer all that much, but it'll help video a lot. Cut little discs of something like this: http://www.amazon.com/Isolate-Sorbothane-Vibration-Damping-Sheet/dp/B004LY8UTY/ref=sr_1_22?ie=UTF8&qid=1427644430&sr=8-22&keywords=sorbothane (It's costly, but you use barely any of it...) Be sure to use loctite on the motor threads and to compress the sorbothane SOME but not too much.
Basically, it's much better to isolate/damp vibration before it excites the rest of the frame, rather than try and keep it out of a couple of critical components (camera, flight board)... Especially the flight board: damping can be harmful, because the flight board itself can "bounce" in response to accelerations of the aircraft.
These are some of the best types of mounts for noisy quads- https://www.amazon.com/gp/product/B00F7E9C1W/
I have used them on a few 6500mpus with untunable twitches and they always solved the issue.
Edit: and I agree with the 6500 statement. I had a few that worked awesome. Although they had a higher noise floor they are definitely and improved more precise version of their predecessor the 6000mpu. It's too bad they got such a bad rap.
Yeah, my floors are exceptionally creaky, which might be the main problem... Someone would have to re-nail the flooring to get that out... or something like that! But yeah I had another commentor in the ring-fit subreddit mention rubber mats specifically for washing machines. I found this and might give it a go along with the mini trampoline. Thanks for your input/suggestions!!
If it was a piece of machinery I'd have gone for a foam pad like this. Ideally that's what you'd stick between the source of the vibration and the ground. But it should work for your bed.
You can get puck shaped rubber feet too.
Depending on the vibration you'll want a different hardness. As this is just transmitted vibrations, these may be a little stiff, but might be worth a go.
I can't really vouch for either of these items in particular. And they do seem to report a bit hit and miss with the reviews. I suppose the hard part will be making sure that your bed stays on top of them and doesn't crush the material they've made from.
Also, make sure you don't have the bed against the wall, because the vibrations will be transmitted up that too.
If you want a low tech solution, cut tennis balls in half and stuff them with a firm foam.
I bought these anti vibration pads from Amazon.
Diversitech MP4-E E.V.A. Anti-Vibration Pad, 4" x 4" x 7/8" Pack of 4 https://www.amazon.com/dp/B00BVEMLR4/ref=cm_sw_r_cp_apa_9dFNAbVYKVG1H
I put them under each clever if the base. THEY ARE AMAZING. I can sometimes not even tell it's printing. I often find myself now checking to see if it's still for some reason. Before you could hear the vibrations through the walls in other rooms.
For the $10 they cost I would recommend them to everyone.
I think I know exactly what you are talking about. I have a roll in my toolbox for making intake and throttle body gaskets.
Keep it from scratching, yes. Keep it from vibrating, probably not.
Something like this would be about perfect, but I am sure you could find something much cheaper.
I would probably just go to the hardware store and look at something like garage door or regular door seal to find something with the right durometer (squishiness) rubber. Too soft and it will just squash flat and not do anything. Too stiff and it won't soak up much vibration.
1/8" would dampen a helluva lot of vibration, but 1/16" would probably do the trick too.
Clean Tools The Mini Absorber Synthetic Drying Chamois, 17" x 13" (Color may vary),assorted https://www.amazon.com/dp/B000BQSL5E/ref=cm_sw_r_cp_api_i_EyFVDb0Y0CN42
This is a good one and a reasonable size. You can always trim it down a bit if you like too.
https://www.amazon.com/Diversitech-MP4-V-Anti-Vibration-Pack/dp/B00BVEMLR4/ref=pd_rhf_ee_s_cp_1_3?_encoding=UTF8&pd_rd_i=B00BVEMLR4&pd_rd_r=K7RAMWWPTQMWDQG4J2Y5&pd_rd_w=IO06O&pd_rd_wg=R53mt&psc=1&refRID=K7RAMWWPTQMWDQG4J2Y5
4" x 4" x 7/8" Anti-Vibration pads, Qty 4 in total
Helping a friend this weekend who has a Synology NAS Rackstation, approx size is 2U high, by 22" x 24"
For now, she will be placing it on top of an old, heavy wooden microwave cart (on the top).
It's a solid wood unit; but I wonder if adding the above 4"x4" anti-vibration pads placed in each corner would help the vibration/noise
She might be doing a small server rack; but that is long time away. /thanks for reading
Probably something like this
Anything rubber would at the very least dampen the vibrations. Possibly even like a cork drink coaster or something like that.
Watch this video on inline SATA power cables:
https://www.youtube.com/watch?v=Ls14BmwkeWg
If your PSU uses similar connectors what I'm suggesting is removing each cable, probably one at a time due to them being black and easily mixed up, and flipping it upside then reinserting it so your entire SATA power connection gets flipped the right way.
I can take photos of me flipping one over one wire at a time using a spare molex adapter like the guy in the video uses if you still can't figure out what I'm talking about.
If you wanted standoffs I'd recommend just anti vibration isolators with the same threading that you use to mount a HDD, the 4 piece M3 set would work well and give you 8mm of height off the floor of the case:
https://www.amazon.com/uxcell-Female-Vibration-Isolators-Absorber/dp/B07MFY9G8V
your wife is farting
j/k
probably a plumbing thing (vent pipe moving in the wind? water hammer situation?) . do you share a wall with anyone? is your bed on wood floors or carpet?
if your bed touches the wall, move it out. perhaps buy some rubber isolators for the feet:
https://www.amazon.com/Diversitech-MP4-V-Anti-Vibration-Pack/dp/B00BVEMLR4
Don't forget some sorbothane blocks to set it on. They reduce vibration transmitted to and through the floor by an amazing amount.
I'm planning on doing a motorcycle road trip and taking my dslr. The bouncing around will be prevented as I will strap it to either the rear seat or tank bag. But then that opens up the question of vibration.
Would THESE work if I lined the bottom of my bag with 4 (they are only 4" square) or is there something else someone can recommend?
These work better than a mat. I just put them under main contact points of my trainer.
https://www.amazon.com/gp/product/B00BVEMLR4/
> So is it really worth your time to sit still for a good 5 minutes during a run to make sure you get every tag without ruining the device?
Why would I do that? Stash anything of real value in a faraday duffel bag (not even remotely a far fetched concept: seeing as how these already exist )
That said, stealing pistols and other random low value crap should not be worth the effort to drag out a big pile of shit out of the target area with the team, detag and fence it. The reputation system is the way to punish that IMO: Teams dumb enough to risk fucking up a run by looting everything in sight should acquire a bad rep/notoriety score quickly and soon have a hard time finding non-suicidal runs.
I'd say, in general looting should be reserved for things rare/unique that the players won't be able to get otherwise (or at least have a very hard time getting), or to reward the players with items of high value to fence or trade for favors (IE: High end cyberdecks, super forbidden weapons, etc) that they will need in the campaign. The GM should make it reasonably obvious that the thing is worth the effort and is worth looting.
Needless to say, looting ware should acquire the team a horrible rep immediately.
Unless your GM plays all his NPCs as super cheapskates and thinks that you should loot corpses to make up the difference (had to deal with this once, was super obnoxious, I blame it on the GM being an old school D&D super munchkin. The team had to loot corpses to make enough cash to keep up on rent, much less buy any upgrades, which it was hinted strongly we'd need for the upcoming missions).
I've got multiple Lux (V1s) that I use soft mounted, using these types of stand-offs:
https://www.amazon.com/gp/product/B00F7E9C1W
I doubt there will ever be a software fix for the lux v1 noise issues since the root issue is a hardware deficiency, though in my experience the board still flies great (YMMV depending upon motors, frame, how your fc is mounted, and tons of other factors).
Something like this
I picked them up on dime city cycles website but I'm pretty sure that they are the same as the ones on cognito moto. I put 15mm anti vibration mounts between the gauge and triple tree so the vibration isn't terrible. I read on some forums that vibration really kills those gauges. The headlight is from speed moto co and I have to say I am impressed with the build quality. It's all steal and glass, very sturdy. The only downside is the bulb is in a sealed unit which I assume has to be replaced as a whole. Snagged the clutch and brake levers off eBay. They are just a generic 7/8 set but definitely an upgrade from the stock master cylinder.
Edit: Links Added
I've used a mixture of Silverstone silencing foam, and 0.125" Sorbothane (https://www.amazon.co.uk/gp/product/B019GBKKPS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) to fill mine, works very well.
You can even stick the sorbo to the underside of the plate in various places, in between the PCB and plate, to dampen and noise travelling though it.
Watch the extruder gear. If the sound is when it turns backwards, that's the retraction sound. Install a NEMA 17 stepper motor sound damper on the extruder motor. Might as well do the x,y at the same time. Only do z motors of you do a lot of z hopping on retraction
(5pack) NEMA 17 Steel & Rubber Stepper Motor Vibration Damper for CNC 3D Printer https://www.amazon.ca/dp/B07CL356J5/ref=cm_sw_r_cp_apa_i_zehZCbXWMFNAY
depending on the keyboard you can fill it with foam or get sorbothane dampening mats like this. there are examples on youtube how it affects the sound of the kb. the biggest factor is the switch tough.
edit; just saw your flair. if this is about your realforce is the louder sound when you let go of a key?
It would probably help to have it isolation mounted and in an enclosure. If you do build an enclosure you can further reduce the sound by lining it with something like Dynamat. Also look for threads on RV water pump silencing. Those may help.
These are the type of isolation mounts I am referring to; https://www.amazon.com/Rubber-Vibration-Isolator-Mounts-Female/dp/B0734N6NC2/ref=sr_1_4?ie=UTF8&qid=1500848148&sr=8-4&keywords=water+pump+isolation+mount Similar devices come with some high end after market fuel pumps.
It's probably fine but I'd want to see bigger vibration buffers. Something about this size:
https://www.amazon.com/JW-Winco-351-1-38-25-3-8-55-Cylindrical/dp/B00F7ECKAM/
I bought some of these off Amazon https://www.amazon.com/gp/product/B00BVEMLR4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I cut them into four smaller 2"x2" squares and printed some feet for the bottom of the printer to hold them in place. My printer already sits on a solid 2" thick wood base but this helped cut the noise and noticeable vibrations transmitted through my enclosure.
https://www.amazon.com/dp/B00BVEMLR4/
Some of these anti vibration pads to make the printer quieter, cut up into smaller pieces. I haven't really noticed a big noise difference with these (the concrete blocks I added later made a much bigger difference) but I keep them on there anyways.
I would also suggest a damper on the Y-axis motor, that made a huge difference in noise and vibration.
This: https://media.bahag.com/assets/resp_product/58/86/90588655_21550839.jpg
You can get those usually in hardware stores or where washing machines / dryers and so on are sold. A general "anti vibration mat".
Or something like this: https://www.amazon.com/casa-pura-Anti-Vibration-Vibration-Appliances/dp/B071DVFWTW
This is what I used. https://www.amazon.com/gp/product/B0084EXWP4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Try using some of these. Diversitech MP4-E E.V.A. Anti-Vibration Pad, 4" x 4" x 7/8" Pack of 4 https://www.amazon.com/dp/B00BVEMLR4/ref=cm_sw_r_cp_api_S8XfAbH5554VM
Put one under each corner of the furnace where it sits on the trusses. You might need a total of six depending on how the AC coil is mounted.
get this
https://www.amazon.com/Gwisdom-Extruder-Upgraded-Replacement-Extruders/dp/B07FKD4FZD
​
https://www.amazon.com/gp/product/B01B7ZH2LG/
​
https://www.amazon.com/gp/product/B074XRYC1M/
​
https://www.amazon.com/gp/product/B0179IODB2/
​
https://www.amazon.com/gp/product/B07JPLV5K1/
​
https://www.amazon.com/gp/product/B07BC6WH7V/
​
https://www.amazon.com/gp/product/B07J9VGX54/
​
https://www.thingiverse.com/thing:3732669
​
https://www.thingiverse.com/thing:2920060
​
https://www.thingiverse.com/thing:3705354
​
https://www.thingiverse.com/thing:2887348
As others said, vibration is the real issue.I made a platform with these: https://www.amazon.com/Diversitech-MP4-V-Anti-Vibration-Pack/dp/B00BVEMLR4 and some insulating panel from home depot and helped quite a lot with the vibration coming from my kickr.
edit: inflating -> insulating
You can even buy them from amazon
A set of stepper dampers will reduce the motor noise quite a bit.
bought it on amazon... here's the link:
http://www.amazon.com/3B-Scientific-U56001-Vibration-Generator/dp/B005LY474U/ref=sr_1_1?ie=UTF8&qid=1420555864&sr=8-1&keywords=vibration+generator
I'd suggest at least moving them to the edge of the shelf and you can put some anti-vibration pads under them.
That's actually a good idea. Put newspaper down and a sponge or two. I bought a nice plastic container on Amazon that has multiple latches. It was kind of pricey but it is what it is. I also bought some anti vibration pads for under the container. I've read that the vibrations from driving can really stress snakes out. I'll include the links below.
IRIS Weathertight Storage Box, 41 Quart Weathertight - Clear https://www.amazon.com/dp/B003IB0JCW/ref=cm_sw_r_cp_api_VNvaAbT3RJ52R
Diversitech MP4-E E.V.A. Anti-Vibration Pad, 4" x 4" x 7/8" Pack of 4 https://www.amazon.com/dp/B00BVEMLR4/ref=cm_sw_r_cp_api_OOvaAbF5QXAQW
Is it the raw seek noise of the drives that is annoying, or the seek noise amplified by the cabinet the NAS is sitting in?
I used to have a TiVo on top of an armoire in the bedroom that echoed through the wood.. one of those relatively cheap floor mats for fatigue (foam mats that interlock) solved the problem for me entirely.. You could still hear the seek in a silent room, but not with the TV on. I now have a similar problem with 3d printers upstairs from my bedroom.. these work wonderfully to isolate the vibrations away from the cabinet and keep the sound at bay: Diversitech MP4-E E.V.A. Anti-Vibration Pad, 4" x 4" x 7/8" Pack of 4 https://www.amazon.com/dp/B00BVEMLR4/ref=cm_sw_r_cp_tai_DK2JDbBSHP855
Grab a small condensed foam footing pad from home depot or Lowes that they carry in the flooring section as you can cut it to size. Another option is casa pura Anti-Vibration Pad - Rubber Vibration Isolator Mat | Matting for Washing Machines, Washers, Dryers and Appliances | Multiple Thicknesses & Sizes | 1/4" Thick - 24" x 24" https://www.amazon.com/dp/B071DVFWTW/ref=cm_sw_r_cp_apa_i_B5w5CbGRG77RA
I use these in my apartment: https://www.amazon.com/Diversitech-MP4-V-Anti-Vibration-Pack/dp/B00BVEMLR4/
seems to work for my angry downstairs neighbor.
Well it's not quiet to be honest but you'll have a hard time dampening the noise no matter how you go about it, I do recommend getting vibration dampening cube thingies (like this or maybe this) to put under your rig just so the noise won't travel into the floor which will make it exponentially louder. Those anti vibration things also help keep the vibration in the rig rather than dispersing it into your surrounding area.
As for structural integrity, I've had no issues. I got a tube of threadlocker in case the screws would vibrate loose but I haven't put it on yet and they are still as tight as the day I put them in so I wouldn't worry too much.
Do you have it on a shitty particleboard table or similar? They transmit a lot of vibrations into the floor. I have a set of these under my MK3 and it made it even quieter:
https://www.amazon.com/Diversitech-MP-4E-Eva-Anti-Vibration/dp/B008HQ2AAW