Reddit mentions: The best autmotive turn signal bulbs

I just upgraded the lights on my kawasaki, so I got all this worked out.

• First, a reference for the bulbs your bike takes: https://www.superbrightleds.com/vehicle/2007-honda-vtx1300c-vehicle-led-lights?make=32&model=3563&year=2007
  
• Front turn signals- I wanted to use my front signals as running lights, so I got these white/amber 1157 bulbs (it says it fits the 7528 sockets on your bike) and clear lenses. These will be white lights, then when you turn on the turn signal the white on that side goes out and blinks amber: https://www.amazon.com/gp/product/B07JC7233R/.
  
• amber/amber 1157/7528 bulbs if you don't want white/amber: https://www.amazon.com/iBrightstar-Newest-Bright-Projector-replacement/dp/B071FB824J
  
• clear/smoke turn signal lenses for your bike: optional, but I like the look: https://www.amazon.com/Krator-Signal-Lenses-Indicator-Blinkers/dp/B016N2H60A
  
• Main headlight: I actually kept this halogen because H4 LED headlight bulbs were too expensive and I couldn't mount them in my headlight bucket without modification. This one's more than bright enough for me, I'm really happy with it. I don't feel like I'm blinding oncoming traffic with this one but the lowbeam is brighter than my high beam used to be. But if you still want to, look for an H4 LED bulb, but I don't recommend it. I'd rather replace the bucket if I went that route. https://www.amazon.com/gp/product/B000CR3UW6
  
• Tail light bulb: red/red 1157 (says it fits 7528, your bike's size) LED bulb: https://www.amazon.com/gp/product/B01MY4T4BU/
  
• Rear turn signals: amber 1156 (says it fits the 7506 socket) LED: I actually didn't use these, for a reason I'll explain below. https://www.amazon.com/gp/product/B0739RCR3J/
  
• Turn Signal Relay: You may need this to fix a problem with the bulbs flashing really fast. The reason it does that is because it expects a certain power draw, but the LEDs draw less power, so it thinks a bulb is out. When that happens the turn signals flash really fast. This replacement relay is designed to fix that and the page says it aught to work on your bike. Installation on your bike should be easy: you have to find your stock turn signal relay, unplug it, and plug this one in. https://www.amazon.com/gp/product/B00RM26LXO
  
• Some quick googling said the turn signal relay "Should be under the right side cover. The one in rubber with the plug in the "back" is the fuel relay the other one has a plug srait in the bottom, thats the one for the blinkers." I hope that makes sense when you get into the bike, check with VTX owner forums for more info.
  
• All 4 turn signals lighting at once- this is something that happened with my bike, again because the power draw was different the bike didn't want to differentiate between left and right turn signals so both sides would light up. I found out if you leave at least one regular bulb in the system, it would behave normally and switch between left and right. That's why I didn't use LED rear turn signals- I can live without those being LEDs. The alternative solution I read was soldiering some resistors into the turn signal indicator circuit, which is above my technical capabilities/confidence. It's your call if you want to go that route, I'm happy enough with my setup (I actually uploaded the demo videos on the amazon page for the relay and white/amber LEDs so you can see how it behaves.)
  
  For the fast/4-way flashing issues, I can't say if they will effect your bike. I have a feeling they will, and if they do you know how to address them. All in this upgrade runs about 90 bucks, minus 17 if you decide to stick with halogen rear turn signals.
  
  ​
  
  Good lord that's a long post

I can’t help with headlights info, but I have a 2015 3 and did the LED Interior, reverse, license plate and parking lights upgrade. Really pretty easy and much better light all around. I used these and they all are still working great:

https://www.amazon.com/gp/product/B01AHVND32/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B01DE7UC6C/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00NPIYDWU/ref=oh_aui_detailpage_o06_s02?ie=UTF8&psc=1

I also bought this toolkit for removing interior the light covers and panels:

https://www.amazon.com/gp/product/B01MUC8LTG/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

It’s not hard to do and there are very good videos on youtube to guide you, like this one:

https://youtu.be/Hdm9wUFgl18

I am currently looking at these for the turn signals too:

https://www.amazon.com/SiriusLED-resistor-Extremely-Upgrade-Version/dp/B0774HQC8Q/ref=cm_cr_arp_d_product_sims?ie=UTF8#customerReviews


Good luck!

God I hope this formats correctly - I am a neophyte.

Exhaust - http://www.ixilusa.com/ixil-l3xb-black-hyperlow-xl-full-exhaust-yamaha-mt-07-2014-2015/

Super deep and loud sound - videos online don't do it justice, its unbelievably loud when the baffles are out. Had to have the cat cut out of it. Be aware they have a cat in the V section before the end of the pipe.

Removed the snorkel covering the airbox - I was told its basically blocks airflow.

ECU Flash / Dyno by 2wheelDynoWorks - https://2wheeldynoworks.com/shop/ecu-flashing-service/15-17-yamaha-fz07-mail-in-ecu-flashing-service/

Nels himself worked on my bike - super stoked (shout out to Nate too) They have the best customer service.

Active Tune - https://2wheeldynoworks.com/shop/ecu-flashing-service/yamaha-activetune-afr-closed-loop-self-tuning-ecu-kit-2/

Tune as you go

Bike side harness - https://2wheeldynoworks.com/shop/ecu-flashing-service/ftlink-v1-1-6-pin-bike-side-harnesses/

For tuning later

Windscreen - https://www.revzilla.com/motorcycle/puig-touring-naked-new-generation-windscreen-yamaha-mt-07-2018

I got light smoke, I think it goes better with the bike and pushes wind over my shoulders even at 80+ mph

Protection - https://tstindustries.com/Womet-Tech-Total-Crash-Protection-Pack-for-Yamaha-FZ-07-MT-07-2015.html

Basically got everything from this except the bar ends

Bar Ends - https://motostarz.com/collections/mt-07-2018/products/rhinomoto-barends-mirror-mounts-for-yamaha-fz-mt-models

Super easy to replace mirrors etc with these - and they add protection

Throttle tube - https://www.amazon.com/gp/product/B005C59NO2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

90 to 60 degree conversion - its amazing for the price

Dash Screen Protector - https://www.amazon.com/gp/product/B078SMP4ND/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Mirror stem deletes - https://www.amazon.com/gp/product/B07BN8QGPV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Current Mirrors - https://www.amazon.com/gp/product/B01N6GB7DZ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Mirrors in photo - https://www.amazon.com/gp/product/B003RESHVU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I like the CRG Mirrors but they get bumped and are hard to readjust - the cheap ebay/amazon mirrors work great

Headlight replacement - https://www.amazon.com/gp/product/B01H6NZ5QW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Signal replacement LED bulbs - https://www.amazon.com/gp/product/B06XK4PL33/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Super bright replacements for stock bulbs - used the original housings, they plug right in

Running light LED replacements - https://www.amazon.com/gp/product/B00JRE38EA/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

For inside the headlight housing

Tail Tidy - https://www.amazon.com/gp/product/B01BH5YGOM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Flasher Relay for LEDs - https://www.amazon.com/gp/product/B00RM26LXO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Levers - https://www.ebay.com/itm/CNC-Brake-Clutch-Yamaha-MT-07-FZ-07-2014-2018-Adjustable-Engrave-Long-Lever/123350737715?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D17a37c1b2d204ffcba65903d19a97b4a%26pid%3D100005%26rk%3D4%26rkt%3D12%26sd%3D122997203335%26itm%3D123350737715&_trksid=p2047675.c100005.m1851

Passenger peg deletes - https://www.ebay.com/itm/for-YAMAHA-MT07-FZ07-Footrest-Cover-Passenger-Footpeg-Removal-Delete-Kit-2014/253869999740?hash=item3b1bd4c67c:g:3qEAAOSw0JVbm1FQ:rk:1:pf:0

I removed the passenger pegs, needed a bracket to hold the brake fluid reservoir - also cleaned up the pegs

Havent done the brakes yet - going to replace the lines etc with steel braid.

Also want to do a sprocket / chain swap for acceleration

I used a quadlock phone mount for a little bit - but took it off because I was playing with my phone too much.

They're alright. If you can afford to retrofit, I recommend doing that. Avoid any of the aftermarket lights that have projector lenses. They're all garbage from everything I have heard. The ones I got are nice because they fit the stock light (9007) and fit my pre-existing HID kit. I'm running 5000K Kensun HID's for my fog lights and my headlights (headlights are lo/hi). They're bright as hell but in Texas, it is illegal to run HID's without projector lenses and for good reason. (they spread across the road and are not controlled)


These are the headlights. They feel strong and solid but I had to return two passenger sides before I got one that worked properly. (the halo rings were not acting right).

The wiring was pretty straight forward. I wired my halo rings into the fog light's relay so they kick on with the driving lights.

Another neat little thing to get to complete the badass look are some switch back LED turn signals. I got these.

If you decide to get the switchbacks, don't forget to get the load resisters. Otherwise your turn signals will blink too fast.

Also, it doesn't look like a 98 because I have installed the 03 edge front-end and hood.

I will upload some night photos tonight. its hard to get the lighting right on my camera at night to where you can actually tell how they look. I'll do my best.

Turn signals (front and back): https://www.amazon.ca/gp/product/B0774HQC8Q/
I was hesitant to spend $110 on bulbs, but these things are beasts! plus they have the resistors built into them, so no splicing wires or anything. Totally recommend them
The front bulbs were the easiest to replace, just pop the hood, locate the bulb, twist the housing out and pop the bulbs in. The ones in the back were a bit of a pain. Pop the hatch, and where the door is normally closed, to the inner side of the light houses there's a small plastic panel, that just pops off. Behind it is a set of #10 (I believe) bolts. Undo those. The housing assembly takes some loving to get out, but it just pulls straight back -- I broke a tab off trying to go side to side... It goes back in and latches fine, but, learn from me: it goes straight back... Even though it doesn't seem like it does. Then once it's out, replace the bulbs as usual, reverse the process to put it back in.

Backup Lamps: https://www.amazon.ca/gp/product/B01LX4FMD1/
The backup lamps are just covered by a plastic panel on the hatch door that pops out with a pocket knife or small flat head screwdriver, then the bulb twists out as usual.

​

Most of this was figured out first hand, or from the owner's manual.

​

As for my internal lights so far, I've only replaced the one above the back seats and the ones above the front seats. The back seat ones pop out with a knife super easily, whereas the front ones were more complicated. I took some pictures of that process and uploaded them here: https://imgur.com/a/YJItuhz -- Basically, the whole module (lights, buttons, sunglasses holder, etc) all comes out, then you replace the bulbs from the back side. The bulbs themselves I picked up from Canadian Tire, which was just a run of the mill off the shelf LED bulbs

Hi everyone. I made and uploaded a video, exclusively for r/mazda3. I created this video to help others in their purchase decision for LED modifications. This video is not to force you into the brands I'm listing below, but it's only a mere recommendation, and showing what worked for my car. For me personally, brightness, functionality, easy of install, and style were the biggest concerns, and these different combination of lights were what worked for my on my 2016 Mazda3 GT sedan. If you have any further questions, please feel free to shoot me a message.

Picture Album of my 6000K PrecisionLED Interior/Fog Light Swap: CLICK HERE!


DETAILED Imgur Post on LED Turn Signal Light Installation Process for both Sedan/Hatch: CLICK HERE!

LED Turn Signals for FRONT (CA/US Link): Amazon.com Link

LED Turn Signals for REAR (CA Link): Amazon.ca Link

LED Turn Signals for REAR (CA/US Link): Amazon.com Link

LED Fog Lights (CA/US Link): PrecisionLED.com Link

LED Interior, Vanity Mirror, Trunk, License, Reverse Lights (CA/US Link): PrecisionLED.com Link

Bi-Xenon HID Headlights, LED Tailights, and LED 3rd Brake Lights you see in the video are all OEM products. No product links will be posted for these, however are available at various different websites such as eBay or Amazon at your own risk to purchase and/or install. Hope this list will help you with your purchase in regards to any LED lights. As a disclaimer towards everyone, I want to make it clear that:

• these are only RECOMMENDATION to 3rd Gen. Mazda3 owners
  
  
• I'm NOT sponsored by ANYONE or ANY COMPANY
  
  
• any purchase and installation are at YOUR OWN RISK
  
  
• I will NOT be held responsible for any issues caused by your purchase and/or installation of ANY modification products
  

I wouldn't be concerned about getting flush indicators. I would be leery of doing anything that would decrease visibility. You can find some lower profile stalks that will stick out less, but still let you be seen by other drivers.

A word of caution tho, if you're looking to go LED for your signals as I have, while you get a much brighter light, on an older bike it's likely you won't be drawing enough current to activate the relay that makes it flash. This is what happens when a turn signal is burned out and why you get that fast flashing, which is what you will have if you don't get an aftermarket relay or some decent resistors to help.

Another thing you could do, which is what I did, is I rewired my stock turn signals to my brake light as well as installed led turn signals. What this did was allowed it to draw enough current to keep it from giving me the fast flash, as well as giving a dull flash in my tail light. AFAIK it's legal to have a flashing/pulsing/strobing brake light since they sell kits for it. I put the bulbs in the same spot as the brake light bulbs, but I used a few strips of red SMD 5050 in my brake light housing and they're much brighter than stock.

Edit: added link for the type of turn signals.

I bought AuxBeam head lights and am pretty happy with them. Are there better lights avail? yes. Are these better than stock halogens. hell yes. NOTE: You don't need to drill through the dust cap for these. They're simple plug and play.

Auxbeam headlights

Auxbeam fog lights

Everything still good. When I found turn signals that would fit the front though, I got hyperflashing. I ended up using these in the front:

Antline 7443 7440 T20 992 7441 7444 W21W LED Bulbs Amber Yellow, 12-24V Super Bright 1000 Lumens Replacement for Turn Signal Blinker Lights, Side Marker Lights (Pack of 4) https://www.amazon.com/dp/B07BRJTJF2/ref=cm_sw_r_cp_apa_nSnZBbSRMZ46Q

Looks good man. Now what you need to do it get rid of the amber colored light bulbs in there. Silver coated bulbs get rid of the "egg yolk" look and clean up the headlights. I have the ones linked in my headlights and they work great!

Here is the rest of the album:

http://imgur.com/a/yWLIT

I bought these LED's from Amazon.

http://www.amazon.com/7440-7441-T20-Bright-Signal/dp/B00N6CEGVI/ref=sr_1_1?ie=UTF8&qid=1420219286&sr=8-1&keywords=Pair+of+7440+7441+T20+Super+Bright+White+30w+LED+DRL+Signal+Break+Tail+Light+2014

Use this video to figure out how to get to the reverse lights:
http://www.carcarekiosk.com/video/2010_Infiniti_FX35_3.5L_V6/lights/reverse_light

I didn't see the video before I did the change and I messed up ALL 4 clips. (I was drinking / New Years Eve). Got inpatient and just removed with force.

Now I'm on a search to replace those 4 clips. Anyone know where I can get them cheap? I don't need a pack of 25 either.

As far as the LED light goes, VERY bright. At night, it's similar in brightness to lets say a fog light.....sorta.

The top of the LED light that you see in the album is actually a curved Glass/plastic that acts like a magnifying glass to .... magnify the light.

reverse

Something like this for interior.

And these are what I've been using for turn signal, but you're going to need a set of resistors if you do LED blinkers.

For rear, I would recommend the Diode Dynamics Tail as Turn Harness. It also gives you the ability to have twice as many reverse lights. shit is bright.

Beware most of them. They're fine for inside but placing them outside is risky unless you find ones with quality board and construction. These work great in my map-lights and glovebox, but blink like hell randomly in the tag light. I have the same brand of switchback signals like these and they're perfect so YMMV with Grandview lights. YITAMOTOR also makes the T10s similarly, and will blink in the tag. Haven't tried others yet.

Unfortunately I don't have before and after pics.

I had LEDs in the halogen housings and the distance was better than the Anzos. But there is more width with the Anzos. I plan to get different, better, LEDs to see if I can get more distance.

HID still perform better than LED in projectors, but in my opinion LEDs are easier to install. As seen here: https://www.youtube.com/watch?v=rUxfA7RnK-0

I did not get the switchback set, but I did upgrade all bulbs to LEDs.

Front Turns

Rear Brake

3rd Brake, Cargo, and License Plate

Lastly I use Forscan to address hyper flashing and enable "Bambi Mode" (fogs stay on with high beams). I did not have to splice any wires.

I've not gotten any compliments or honked horns at me... so I'm not sure if they are blinding..

Turn signal lights

Alla Lighting Brightest CANBUS... https://www.amazon.com/dp/B07GVT4F2C?ref=ppx_pop_mob_ap_share

Reverse lights

AUXITO 912 921 LED Backup Light... https://www.amazon.com/dp/B0728DYR9H?ref=ppx_pop_mob_ap_share

Inside lights

SEALIGHT 194 LED Bulb Error Free,... https://www.amazon.com/dp/B07G4VJP5N?ref=ppx_pop_mob_ap_share
And
NAKOBO 2835 Chipsets （More... https://www.amazon.com/dp/B07K7F2169?ref=ppx_pop_mob_ap_share

Hope that helps!

If you are in the city the bulbs burn out faster because you have to keep pressing the brakes. Bulbs usually burn out when turning on.

- I have replaced all the bulbs in my dad's car with LED bulbs. Been over a year and they hasn't burned out, before I had to replace them for him every 2 weeks or so. (This is for Camry running as taxi)

For the brake lights and day lights, I have the Auxbeam 3157 LED Light Bulbs and Auxbeam 194

For the headlights I have the Auxbeam LED Headlights F-S2 Series H11

Very good bulbs. I also have them in the 2008 escape. But I just bought it like 2 weeks ago so we will see.

There's a hint of blue with 10k but I like that. Switchbacks are dual colored directionals. When youre head lights are on the directionals are white like in the picture and when youre signaling they flash amber. I haven't touched the break lights but I did switch the rear parking bulb with an led so I can see more out of my rear camera.

HIDs: https://www.amazon.com/dp/B00WW0A69G/ref=cm_sw_r_cp_apip_XKwJWwoD6cpcC

Switchbacks and resistors:
https://www.amazon.com/dp/B01DQHIUFK/ref=cm_sw_r_cp_apip_tSt7OArepHsXm
50W 6Ohm LED Load Resistors
https://www.amazon.com/dp/B004EDF8HY/ref=cm_sw_r_cp_apip_zdXio3mK945jP

Back up bulb: https://www.amazon.com/dp/B01MDUEBX1/ref=cm_sw_r_cp_apip_RnGlyaHFGAh6R

So I just bought a set of JDM Tom's taillights used from the forums and they came without the relay. Can I install them without the relay? Or should I just wait until I buy one. Also, is there a specific kind I have to get for Tom's taillights? Or will one like this work?

http://www.amazon.com/81980-50030-066500-4650-Electronic-Flasher-Toyota/dp/B008C9YS0Y

As always, thanks for doing these Mike!

I upgraded to these:
https://smile.amazon.com/Auxbeam-Light-Bulbs-Reverse-signals/dp/B07414XVKT/ref=cm_cr_arp_d_product_top?ie=UTF8


They do a much better job than the stock reverse bulbs. I have a 2018 too, so these will fit yours.

Looks great!

Get rid of the egg yolk with these bulbs

It is an '82 XS400 special. It ran from 77 to 82. I have drag bars, but left all the cables the original length. The horn bracket got flipped upside down so I could access it/install a new one. I made a bracket that attaches to the bar running down in front of the engine to hold to LED fog lights, run by an auxiliary switch. Painted and wrapped the headers and have emgo shorty mufflers. Emgo pod filters, and a puck-style filter for the breather tube nipple. Led tails, led indicator lights, Upgraded headlight. Point of note on the headlight, mine was a sealed beam halogen. So to add a new bulb you have to buy an aftermarket reflector housing from candlepower.

EDIT: Also forgot Oury grips, cafe mirrors, new fuel lines, fuel filter and vacuum tube.

http://www.amazon.com/gp/product/B007CA6E56/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B002GTKAHQ/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B003T0ITF6/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B00HAQGO20/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B00230QCIY/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B006VFL0SO/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B00HDYB3P2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B000N5UVME/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B0022ZUJGG/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B000UKKSTI/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B00HJEGQQ2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B007ZGKKMA/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B009SK7N8K/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B005ETCIO8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

This is for 12V, though. I've seen 12V ones for automotive use, but they get pretty hot even when bolted to metal.

http://www.amazon.com/Resistors-Signal-License-Warning-Cancellor/dp/B004EDF8HY

Throw those in line with your positive wire and you will be set

Headlight

Front Turn Signals 1157

*Note: Had to file down the nipples a little bit on turn signal bulbs for a snug fit.

LED's use less power than regular bulbs. Because of this, the lights will blink faster (hyperblink). You need to add a resistor to the wiring for the turn signals to introduce more load which will slow them down.

​

Something like this would work.

https://www.amazon.com/Resistors-Signal-License-Warning-Cancellor-x/dp/B004EDF8HY

Headlights (you only need one pair. the cutoff is outstanding)

Map lights, license plate lights, running tail lights, and side marker lights

Reverse lights

Front turn signals (accessible from under the vehicle - pin remover and 10mm socket needed)

Rear turn signals (requires tail light disassembly)

Turn signal resistors (required to prevent hyperflashing; soldering is recommended)

Brake lights (requires tail light disassembly)

Daytime-running lights (pliers needed)

Trunk light and dome light

Most likely hyperlink. I have these and had to get a blinker relay to fix it. Non sequential mode works just fine without it, it's just the sequential mode doesn't pull enough current.

iJDMTOY 8-Pin 81980-50030 066500-4650 Electronic LED Flasher Assy Relay Fix For Lexus Scion or Toyota LED Turn Signal Light Bulbs https://www.amazon.com/dp/B008C9YS0Y/ref=cm_sw_r_cp_apa_i_1K8nDb67H9D9A

https://www.amazon.com/dp/B008C9YS0Y?ref=yo_pop_ma_swf this is the part you need to fix it!

https://www.amazon.com/gp/product/B004EDF8HY/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

These are the ones I used.

Brake lights: https://smile.amazon.com/gp/product/B00P2D3W0A/

Reverse lights: https://smile.amazon.com/gp/product/B00N6CEGVI/

Turn signals: https://smile.amazon.com/gp/product/B00MJ7S1T4/

6 ohm resistors: https://smile.amazon.com/gp/product/B00L4V9ECY/

I had this problem with my thruxton. The resistance in the LED's is too low and it thinks your bulbs are burnt out. Add some resistors in series with the bulbs and it will work just fine.

Edit: Specifically these resistors

SiriusLED 7440 Anti Hyper Flash... https://www.amazon.com/dp/B0774HQC8Q?ref=ppx_pop_mob_ap_share

The ones you posted are more affordable, I chose these because the material seemed more durable and they were. These were a little more pricier.

You bet. Not sure of the OEM Projector Housing part #, but they are GM. Bought them used on FB Marketplace. Brand new with only 3k miles on them. $300 total.

Low Beam/Daytime Running Lamps (bulb): H11/H8/H9 LED Headlight Bulbs Low... https://www.amazon.com/dp/B07HCZ7RZ6?ref=ppx_pop_mob_ap_share

High Beam bulbs: HIKARI LED Headlight Bulbs... https://www.amazon.com/dp/B07GKC818Q?ref=ppx_pop_mob_ap_share

DO NOT WORK. Turn Signal bulbs: iBrightstar Newest 9-30V Super... https://www.amazon.com/dp/B06XK4PL33?ref=ppx_pop_mob_ap_share

Side marker light bulbs: 194 LED Bulb 3030 Chipset T10 194... https://www.amazon.com/dp/B07L8CVPCX?ref=ppx_pop_mob_ap_share

EDIT: THE SIGNAL LIGHT LEDS DO NOT WORK!