Here's my opinion

Shampoo- good choice, make sure you're using a washing mitt and not any kitchen sponge, something like http://www.amazon.com/Meguiars-X3002-Microfiber-Wash-Mitt/dp/B000RXKR6M/ref=sr_1_1?ie=UTF8&qid=1405903374&sr=8-1&keywords=washing+mitt will be fine

Towel- while you can dry with any microfiber towel, it will be best to use one specifically made for drying so you don't have to wring out the towel after every wipe. Also, using a low quality microfiber has the possibility of scratching the paint. My recommendation would be http://www.theragcompany.com/Dry-Me-A-River-26-x-59-Premium-Microfiber-Waffle-Weave-Towel-42009-2659-OW.htm

Wax- I have no idea how much you want to spend, but if you're going to be applying it by hand you generally want to go with a carnuba wax as they are easier to apply and wipe off. My personal favorite is pinnacle souveran liquid wax. Probably out of the price range for a beginner, but it's super easy to apply/wipe off, and it produces amazing results and lasts a lot longer than other carnuba waxes. http://www.autogeek.net/pinliqsouvwa.html If you want something on the cheaper end and can be purchased in auto stores, go with Meguiar's gold class liquid wax. http://www.amazon.com/Meguiars-G7016-Carnauba-Premium-Liquid/dp/B0002UNOYM/ref=sr_1_2?ie=UTF8&qid=1405903940&sr=8-2&keywords=gold+class+wax

Applicators- If you're applying wax, go with a foam applicator pad like these lake country applicator pads(make sure they're the red color) with this palm grip

Headlights- If you have a power drill, I recommend this http://www.amazon.com/Meguiars-G3000-Heavy-Headlight-Restoration/dp/B004HCOE72/ref=sr_1_1?ie=UTF8&qid=1405904455&sr=8-1&keywords=meguiars+headlight kit as it attaches right to the drill and works very well.

I just got the amazon cheap-o ones called Turbo SII LEDs and they are pretty darn good. They dont cast light out as far as I would like, but they are better than stock and look great. I zip tied the adapter because the plug didn't seem to secure perfectly. I have no complaints really. They were plug and play. They were $113 and now they are $95. I would recommend them as a budget friendly solution that look awesome.

I got these:

https://www.amazon.com/gp/product/B01B376YOE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

They are knock off's but they use Cree LED's and work pretty well. The two suggestions I will give you is 1. use a ziptie for the connector to secure it better, the lock doesn't really work very well. and 2. use a protective 3m headlight film, as the plastic on the headlight seems prone to scratching.

I haven't had moisture intrusion issues with these and they are very bright. In my book it definitely beats 250 for JWS lights. I can find better things to do with that money.

I have an LED headlight assembly I'd be willing to sell you. I had it on my SV650 originally but I decided to buy a halogen headlight assembly instead because I like how it looks better than the LED. The led assembly is pretty nice though, I bought it from Amazon for $100 and it has Integrated turn signals if you decided to use them. It's still in good shape, I'd say $50 would be fair for it. Here's what it looks like on my bike: http://imgur.com/a/xraOlqr

Here's also a link to it on Amazon: https://www.amazon.com/dp/B078MVXJBL/ref=cm_sw_r_other_apa_i_g.RADbQ49QRX4

I'm not OP, but I've had great success using the Meguiars kit on 3 different cars. Been using the Headlight Protectant about once a month, and they are staying clear. Someone below mentioned clear coating them after restoring, which is probably a better long-term solution.

I have these generic led headlamps installed. I havent used them much yet (the bronco is a driving project) but they seem to be pretty good. They are very bright but have a decent cutoff so you can align them to not blind oncoming traffic. The cheaper led sets are often more like floods that are bright but just awful for road use. If you want to spend more and get higher quality, there are brand names like Truck-Lite that have great reviews; personally I couldn't justify the expense when I have a lot of other projects on the truck.

2018 New Osram Chips 110W 5x7 Led... https://www.amazon.com/dp/B07BWBRDJ5?ref=ppx_pop_mob_ap_share

I pretty recently switched to Truck-Lite LED headlamps, which are complete units that are super energy efficient, bright as hell, pretty heavy duty, and are wired for our headlight plugs. They're pretty pricey, but I pulled the trigger on them on Amazon knowing I could return them if they weren't worth it. So far, they've been the most useful day-to-day upgrade I've done. They make driving at night actually pleasant. They're really incredible, though no photos online do them justice.

Here's an album with some photos of my front end:

http://imgur.com/a/zCMHZ

And here's a link to the truck lites on Amazon, which are currently for sale for cheaper than I scored them.

http://www.amazon.com/Truck-Lite-27450C-Headlamp/dp/B007ED7HNY

Let me know if you've got any questions about them :)

To each their own, but I know a popular one that I've seen around a lot is this one. Its a pretty simple install apparently, but after taking the dust cover off, I couldn't exactly figure it out so I'd have to play around with it more to see if I can install it myself or if I'd have to take it to someone to install. Alternatively, rather than replacing the whole unit you could just replace the bulb with a much brighter one.

Congrats on getting up to 60mph! Work your way up slowly and be careful not to override your ability!

Hey, crutchfield has stereos and the wiring etc. Sometimes they are as much as 30 percent higher in price, but you will narrow down your search quick. Also, I got some great LED headlights/fog/markers off Amazon. They work great and we're only 100 bucks.

DOT Approved 7'' Black LED Headlights + 4 ''Cree LED Fog Lights for Jeep Wrangler 97-2017 JK TJ LJ https://www.amazon.com/dp/B01KNXSIYS/ref=cm_sw_r_cp_apa_i_9ec2CbRJWW3R4

Edit:crutchfield has Marine stereos as well. (Weatherproof)

Local shop rebuilt it for me, built it with all new parts stronger than the factory transmission. Can’t say exactly which ones but it drives 100 times better. He’s a trusted mechanic so i went with what he suggested. Here’s the link to the headlights https://www.amazon.com/dp/B07BWBRDJ5/ref=cm_sw_r_cp_awdb_t1_HHpUDbXXCCWZD
So far they are awesome! And they have a ton of good reviews so I would recommend!

It’s just a Chinese knockoff I got off Amazon for $40

There’s a bunch of them up there but here’s the link to the one I bought.

Super bright and super easy to install.

These are the best headlights I’ve bought. I know it’s after market but it’s sooo easy to install and it’s plug and play. Except for the DRL. Just my opinion hope it helps.


Xprite 7" Inch 75W CREE LED Headlights Hi/Lo Beam With Daytime Running Light (DRL) For Jeep Wrangler JK TJ LJ 1997-2018 (DOT Approved) https://www.amazon.com/dp/B018VIN9NM/ref=cm_sw_r_cp_api_ZESIBbPARMRB7

https://www.amazon.com/gp/product/B06XRXTX32/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 These are them, about 10x brighter than the stock halogens. I haven't wired up the DRL's yet but the halos are on when the low beams are it looks really nice. Super easy to install as well, took me like 20 minutes to get em in. https://i.imgur.com/Ue4DlWe.jpg

These lights are the ones I got. I love them. I think they look good and they’re plenty bright. With the high beams on, its REALLY bright. I’d definitely recommend them

Funlove 5 3/4 5.75 Inch LED Headlight Halo with DRL for Harley Davidson Motorcycles https://www.amazon.com/dp/B06ZYJHT3K/ref=cm_sw_r_cp_apa_i_QbY2BbBPMXECP

Got it off Amazon, says for Harley but fit perfectly on my bike. There was also a review of someone who put it on a bobber as well so I felt more comfortable getting it.

I used:

Meguiar's Headlight Restoration Kit

It cost me pretty much the same price at Wal-Mart and bought a pack of 8 micro-fiber towels with it for an additional 5$.


You can kind of tell the right headlight came out a bit better, and well they didn't come out as good as I expected. I also did it by hand and did not use any powertools.

BUT WOW! The improvement is massive, You can really tell the difference when you're driving at night.

(You can tell by the seventh picture.)

Loli don't have a bike yet but already started looking at headlight and looking into tail lights as well. So far the best headlight i have foubd is this one:


LED Headlights-7"/7 inch Round 50W Cree Hi/Lo Beam Motorcycle Driving Light with DRL Turn Signal Halo Ring Angle Eyes

Not sure if you like it , I personally do. And hopefully this is not pulling as much as the other.

Edit: i do wanna say I’m not sure if they are dot approved but i think they are as it says DOT SAE on the headlight

7x6" inch Halo LED Headlights, OVOTOR 5x7 inch Square LED Headlamp with Arrow Angel Eyes DRL Turn Signal Light Replaces H6054 H5054 H6054LL 69822 Fit Trucks Jeep Wrangler XJ YJ Sedans GMC https://www.amazon.com/dp/B075XL75ZC/ref=cm_sw_r_cp_apa_i_oUTXDbY76SR8M

These are the LED lights I bought for my 91 Wrangler. They were super easy to install, and were a great upgrade from the stock headlights. Driving at night is much better.

The low beam pattern is nice and wide, the high beam pattern just has two spots it throws down the road, in addition to the low beams. I've been told the high beams are really bright but it doesn't seem to add a whole lot to the beam pattern.

Overall I've had them for about a month and I'm very happy with them. I have not wired the turn signals and my Jeep does not have daytime running lights. I would recommend a set of foglights for longer distances.

Great question! I got a multi-part answer for you:

----

Part 1: What kind of headlamp does your E250 have? If you know, skip to Part 2.

Before we can start evaluating LED options, we need to know what kind of headlamp your Ford E250 has. If it has the sealed beams, then it's extremely, extremely easy to upgrade to high-quality LED headlamps.

If it has the 9007 bulbs, then things are a little different.

So, do you have sealed beams or replaceable bulbs? You have sealed beams if you replace the entire headlight, glass and all, when it burns out; you have bulbs if you pull out a bulb when the headlight burns out.

If you don't know take a picture of the headlight and post it here; we may be able to identify it.

----

Part 2: your LED upgrade options if you have sealed beams:

If you have the rectangular H6054 sealed beams, these are your best LED option. Here is an Amazon link.

If you have the round H6024 sealed beams, these are your best LED option. Here is an Amazon link.

Are you sure you used the kit correctly? I restored my beater's headlights with Megiuar's G3000 kit and the turnout was pretty good. The thing is, the entire process took me about 30 minutes of sanding per headlight (I was a bit timid with it at first).

Additionally, headlights need to have UV protection on them or the hazing will come back. The gel stuff that comes with the kit will only last about 1 month before you need to re-apply it. Your best bet is to apply a longer lasting product like Opti-Lens to ensure permanant protection.

I got these from Amazon, which is where just about everyone gets them I think. These particular ones are the Aukmak ones. The halos are super bright, but the headlights themselves aren’t the brightest and the highs don’t project. I went to the beach at night and the road out is very dark in some places.

I also had to tie these into the drl/turn signals so I have hyperflash right now. Any 7” Jeep headlight works though, and I’m very happy with these overall.

My two buddies have this one:
https://www.amazon.com/dp/B018VIN9NM/?coliid=I2ILSM2GBUX8D8&colid=1SAB2Z37OSNQW&psc=0&ref_=lv_ov_lig_dp_it

If you're looking for some super bright LEDs, these are about as bright as you'll find them. From what I have seen, the low beams are about 2-3k lumens brighter than some LED's highbeams LOL. They are DOT approved, so I guess they're good to go! My buddies haven't had any issues with them, no need for anti flicker dongles either.

Hi,

I updated the signaling and lighting for my 1986 Vulcan 750. It was easy to do, improved visibility, and shaved off all those dangling blinkers giving the bike a sleeker look.

The integrated taillight was bought off of eBay for around $US 28.00. The guy that I bought from is out, but I've found what looks to be the same product from another Chinese vendor at Motor-Integrated-LED-Tail-Light-Turn-Signals-for-KAWASAKI-VULCAN750-1986-2003

After removing the rear signals and the rear tail lens and brake light bulb I was able to connect the LED by putting its bayonet style connector into the brake light bulb socket and splicing the common, left and right signal wires using some Bullet terminals. I put some masking inside the lens (to hide the wiring) and put the lens back on. Easy peasy 10-20 minute job.

I also removed the front signals and replaced them with some LED triangles off of a sport bike, using the unused capacitors from the LED Tail Light kit to make them work as both signal and running lights.

Aalso replaced the old dim yellow headlight with a Daymaker style LED with integrated turn signals - which looks sharp and makes a HUGE difference in nighttime visibility (both ways). From Amazon - LED Daymaker Headlights 7 inch Round 50W Motorcycle Driving Light with DRL Turn Signal and Halo Ring

This mod was a little more involved because the new LED headlamp didn't fit the original "bucket" so I had to order a new headlamp housing and cram it all it. But it now looks like it could be original equipment, except that none of this stuff existed in 86.

Unfortunately, this was not a simple headlight swap. To make it work, it required a completely different headlamp assembly (bucket, trim & mounting rings). I used the headlight assembly off a [Kawasaki 1976-1979 KZ750-B] ( http://www.ebay.com/itm/Z1-900-KZ650-KZ750-KZ900-KZ1000-H2-KH-Chrome-Bucket-Head-Light-Assembly-/142427700153 ). You will reuse the mounting rubber inserts and bolts /nuts from your factory bucket.

Photo of my bike

I got some inspiration from a [How To video retrofitting LED projector headlight on a 1980 Kawasaki KZ750-B] (https://www.youtube.com/watch?v=O-GI4-VdCIA)

Halos take a little bit of wiring knowledge, can you/husband splice wires?

For $250 and under you'll be looking at Amazon headlights, they're relatively hit or miss, I have a set and am at 2+ years now of them running fine. Some people have them die sooner.

Xprite I believe is the leader of cheap headlights: Xprite 7" Inch LED Halo Headlights for Jeep Wrangler JK TJ LJ 1997-2018(DOT Approved),CREE LED Chip, 80W 9600 Lumens Hi/Lo Beam with Halo Ring Angel Eyes DRL https://www.amazon.com/dp/B00WL8X3HQ/ref=cm_sw_r_cp_apa_i_CXv3CbP1CH4J8


Basically you'll need some dielectric grease, some scotch locks with dielectric grease already in them, a test light, lots of electrical tape, and zip ties. That and a thin t10 or t15 torx screw driver to aim the headlights afterwards.

The halo wire would get scotch locked to the running light in the fender (test light to determine the positive wire), taped up, and then the headlights themselves are plug and play. Just be sure to use the grease on the connections to prevent corrosion, and then tape it all up to keep water out.

Takes like 1-2 hours.

Also, of you live where it's snows a lot, the LEDS don't get hot enough to melt snow. So while they're 1000% brighter than stock halogen, the LEDS are useless in blizzard driving. I have halogen KC lights when it's heavy snow driving.

Good luck!

What is your budget?

One other option you might want to look at is LED headlamps but you need to buy ones that have a distinct cuttoff for on-road use. I recently bought these cheapos that do not have a cut off hoping that I could make due but really I found you should never use those on the road since they are basically just an ultra bright flood lamp so I removed them.

As far as updating to better bulbs and a new housing I don't have experience there but I think you also have to factor in an upgraded harness too...

My .02 worth for ya..... Go in this order instead of jumping right into a set of LED headlamps.

1 - Upgrade the wiring harness.

I installed a Putco harness in 2013 when I first got the XJ and it was a definitely improvement.
Putco 230004HW Premium Automotive Lighting H4 100W Heavy Duty Wiring Harness and Relay

Other folks have gone the eBay route, and I bought one of these on a whim (because it was stupid cheap) just to see if the quality was worth it.
CERAMIC H4 HEADLIGHT RELAY WIRING HARNESS 2 HEADLAMP LIGHT BULB SOCKET PLUGS 7

Ended up not installing it because I had other things to work on instead of replacing the Putco harness that was working fine. Overall though, the quality was surprisingly good and I would have used it if I didn't already have the Putco harness.

For all the negative comments people have about the Putco upgrade harness, it's still working fine a little over 3yrs later. Knock on wood, of course.

2 - Get a set of H4 housings. I bought these off Amazon, but there are other reputable brands out there which work just fine.

GENSSI DOT H6054 7x6 Inch 200mm Headlights Pair with Bulbs Non-Sealed H6014/H6052/H6054

These came with some crappy OCONUS-made no-name bulbs that sucked balls and were immediately thrown in the garbage.

I went to my local PepBoys and grabbed a set of Sylvania SilverStar "Ultra Halogen" H4 bulbs and threw those in the housings.

Holy shit, #1 & #2 were an incredible upgrade to the shit stock XJ headlights.

If you're looking to stay right at or a hair under $100 that's the way to go.

Last year, I came into some $$$ and got it into my head that I wanted LED headlights. Went this route: Truck-Lite (27450C) Headlamp

Wow.

Significant difference from the H4 bulbs + wiring harness upgrade but I'm honestly glad I did the H4 bulbs + wiring harness upgrade first.

Now that said... In hindsight, the LEDs weren't absolutely necessary and I could have put the $$$ into a SYE or something else.

But hey, ya learn as ya go. Right?

I bought these for my 96 Sport. Very bright and clean white. Had them since March and no issues. Had to bend one of the blades a little wider for better contact as one headlight didn’t want to stay on during installation but it is plug and play. Very happy and highly recommended.

(Pair) 5''x7'' 6''x7'' High Low Beam... https://www.amazon.com/dp/B06XRXTX32?ref=yo_pop_ma_swf

The difference from stock is night and day

I used this one about a month ago on my 2005 Jaguar S-Type that had some pretty bad yellowing and oxidation and it worked pretty well.

I'm about to go redo it with a 3M kit though because I'm starting to see yellowing again and there is still some slight oxidation.

Mine were pretty bad, and yours don't sound as bad as mine, so the Meguiars will work fine if you don't mind putting in some muscle work. The 3M kits have pretty good reviews and tend to use drills. So I would use either one, depending on what you want to spend, or if you have a drill or not.

If you are interested in completely replacing them, I would recommend these.

Put them in mine back in April and love them, they are extremely bright.

You are sh*t out of luck (SOL) unless willing to do your own work :)

​

I want to run something like this: https://www.amazon.com/Xprite-Headlights-Wrangler-1997-2018-Approved/dp/B018VIN9NM?ref_=fsclp_pl_dp_4

​

For you, you might want something like these: https://www.amazon.com/Approved-Headlights-Signal-Wrangler-97-2017/dp/B01MTXNED5?ref_=fsclp_pl_dp_5

Yeah, you need to fix the seal as well. I also have the same set of LED headlights as u/SlightlyStoked but mine came with LED fogs as well for about 30 bucks more https://www.amazon.com/Approved-Headlights-Lights-Wrangler-97-2017/dp/B01KNXSIYS I definitely recommend them.

Probably. I was tired of the stock grill and wanted something clean and simple. This did the job beautifully. I might plastidip my bottom grill black. It does look pretty good that way. I want to get the stock fogs instead of these stupid things the previous owner installed. I love the taillights on yours but it would feel weird not having amber. I was tempted to get the taillights like yours but slightly smoked under the red.

This kit was on Amazon for $25 and it did a much better job than the Turtle Wax kit I got last summer. Still have a bunch left over to do a few more cars too.

These are what I got

I had to use a dremel to carve out some areas on the lip of the metal housing that the lights sit inside so that the headlights would sit a bit more flush, but besides that they fit like a charm! The connectors are the same, and the bluetooth box for the Halos wasn't hard to connect to power and ground.

I have had these headlights in my YJ since May. They are by far not top of the line but they are bright as hell and put off a nice clean line. I havent had any issues flickering or any outages at all either.

I'm not sure where to find LED turn signals. If you find an idea let me know. Seems like one of those things you have to rig up to 'make it work'. If you have any questions about the headlights just let me know. You can see what they look like in my recent post as well.

https://www.amazon.com/gp/product/B06XRXTX32/ref=oh_aui_detailpage_o09_s01?ie=UTF8&psc=1

Some Chinese brand but they have worked great for 4-5 months for me. They are about the same as the fancy halogen lights that you see in new cars like Lexus and Mercedes in terms of blinding people. But they are DOT certified. These just plugged right into the same plug on my 01 XJ, didn't have to change anything and installed in 5 minutes.

I got these for $95, couldn't be happier. Very bright and light up a whole 3 lane interstate from median to shoulder, would buy again. They have a clear cutoff point and I've not had anyone flash their lights to say I'm blinding them.

As another commenter stated, also upgrade your wiring harness. I got a k suspension one and it was easy to install and works amazingly well.

Stock tail light will remain for the foreseeable future. Any ideas for what I could do instead? The blinkers are great. Here's a photo in broad daylight. It's been added to the album as well.
Yes, the headlight is currently a cheap LED. This one to be exact. Will get some pictures later today comparing them to stock, as well as the HogWorkz Blackout Daymaker.

I've got these. They're great. Easy install. Good price point.

https://www.amazon.com/gp/product/B015SL0MSK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I have these from amazon: https://www.amazon.com/dp/B07BWBRDJ5?ref=ppx_pop_mob_ap_share They’re really good headlights, i love the look and function of them!

I personally hate most of the ridiculous looking replacement lights, but I don't think these look cheesy at all in person. Performance wise it is 100% worth it. The amount of light these new LEDs put out is fantastic.

Just be aware that due to the way the wiring is set up on our trucks, you will probably have to get an adapter wiring harness. Overall it was about $100 for everything.

Harness Link

Lights

Here's a picture from u/carriemcbride628
https://i.redd.it/u1zqf3mt6kc31.jpg


If you want any more info or pictures let me know.

I purchased https://www.amazon.com/gp/product/B01M09C4FQ on feb 8th, amazon states. These are diffferent ones than the LXLights you posted, different model. I find that these project light pretty well down the road, much much better than the stock high beams did. I think the lows on this model were rated at like 2800LMS.

I bought one very similar to this off amazon. Yes it's cheap knock off but it's well made enough, doesn't leak and puts out a ton of light.

​

If you want a name brand one, JW Speaker makes the actual product for about 6x the cost.

​

Install on either is plug and play and can be done with a couple screwdrivers.

They are probably the Amazon ones.

https://www.amazon.com/gp/aw/d/B01M09C4FQ/

I bought a pair. They are pretty good. Much much brighter than stock and mine are aimed about right, it appears, so they aren't blinding people...yet.

Actually good LED headlights have great cutoff (not the cheap $30 crap.) I'm trying out these guys and so far they perform very well.

They won't. You need a 5x7 / 7x6 headlight. The 4x6 is a smaller light.

I did find some on Amazon that look pretty good. I don't know anything about them though. I searched for "5x7 headlight halo"

TRUCKMALL 5''x 7'' 7X 6 inch LED Headlights Set with Halo DRL Turn Signal, for Jeep Cherokee XJ Wrangler YJ Comanche MJ Toyota Corolla Tacoma Ford F350 Pickup Car Truck Van Black https://www.amazon.com/dp/B07BKY7JY9/ref=cm_sw_r_cp_apa_i_1IFXDbX9QGFVC

2pcs 110W 7x6 LED Headlights 5x7 LED Headlight with Turn Signal DRL White Halo Sealed Beam Headlamp H6054 6054 Led Headlight for Jeep Wrangler YJ Cherokee XJ H5054 H6054LL 6052 6053 - Black https://www.amazon.com/dp/B07FTC7NK6/ref=cm_sw_r_cp_apa_i_QJFXDbJ9V3A2S

7x6" inch Halo LED Headlights, OVOTOR 5x7 inch Square LED Headlamp with Arrow Angel Eyes DRL Turn Signal Light Replaces H6054 H5054 H6054LL 69822 Fit Trucks Jeep Wrangler XJ YJ Sedans GMC https://www.amazon.com/dp/B075XL75ZC/ref=cm_sw_r_cp_apa_i_yKFXDb1Y53JMJ

I’m using this aftermarket knockoff. But I am verrrrry pleased with it. That could be because my stock light was awful... but fellow riders seem to love it.

I went with these and I've been very satisfied. DOT compliant beam pattern, no flicker, and good output. Been very happy overall.

I second this. I ordered these off of amazon last month after someone on this sub recommended them. Easy install. You may want to go ahead and purchase extra tree clips for your grille as they’re easy to break. I got them for <$80 shipped and so far haven’t had any issues / leaks.

LX-LIGHT 7'' Round Black Cree LED Headlight High Low Beam for Jeep Wrangler JK TJ LJ CJ Hummber H1 H2 (Pair) https://www.amazon.com/dp/B01B376YOE/ref=cm_sw_r_cp_api_i_QCaIDb211J367

Eh, some cheap ass chrome LED bulbs I got off Amazon for like 50 bucks. I just wrapped them with window tint because I kept getting bright lighted since they weren't aimed worth a shit.

I'd highly recommend these instead, DOT approved and everything:

2017 New design 5''x7'' 6''x7'' Rectangle Osram High Low Beam Led Headlights for Jeep Wrangler YJ Cherokee XJ H6054 H5054 H6054LL 69822 6052 6053 with Angel Eyes DRL (Black Pair) https://www.amazon.com/dp/B06XRXTX32/ref=cm_sw_r_cp_apa_t9hTzb7V5CAHG

I have them in an unopened box because I barely drive my jeep at night anyways. But, they're plug and play, and ready for whenever my lazy ass decides to install them. Lol

https://www.amazon.com/dp/B06XRXTX32/

They're DOT/SAE approved as well. Has a nice cut off line as well, doesn't blind oncoming traffic.

+1 for the hella 500's -- http://www.amazon.com/HELLA-005750952-Series-Halogen-Driving/dp/B001TWD5KU/ref=sr_1_2?ie=UTF8&qid=1398448031&sr=8-2&keywords=hella+500+fog+lights i have 2 500ff's on the bumper of my ZJ. Also, the rack lights up there are pretty bright, no wiring included but -- http://www.amazon.com/Blazer-C52CW-Quartz-Halogen-Light-1/dp/B004L0AAQY/ref=sr_1_1?ie=UTF8&qid=1398448120&sr=8-1&keywords=baja+offroad+lights

Also, if you were looking for any kind of led pods or light bars, these are really good for the price -- http://illuminationsupply.com/led-pods-c-79_81/

https://www.amazon.com/Headlights-Wrangler-Cherokee-H6054-H6054LL/dp/B06XRXTX32 these are them. Have had em for around 5 months now and they have been great. They are bright. But not blinding to other drivers.

https://www.amazon.com/Headlights-Wrangler-Cherokee-H6054-H6054LL/dp/B06XRXTX32/ref=sr_1_5?keywords=jeep+yj+headlights&qid=1551328763&s=automotive&sr=1-5

This is the amazon link, they are cheap led headlights but work great.

I just did my wife's car with this kit and the results were pretty amazing.

I don't necessarily agree that you have to upgrade the harness to get good lighting. For the price, LED headlights are readily available and have great results versus the stock halogen bulb. These are what I run and I have no complaints with them on my 99. They are 100% plug and play with the stock harness. Just pull the old lights out and plug the new ones in. Easy 5 minute job. https://www.amazon.com/gp/product/B01M09C4FQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Direct from China through AliExpress but they weren't available back then like they are today.

(2 Pcs) DOT approved 5" x 7" 6x7inch Rectangular LED Headlights for Jeep Wrangler YJ Cherokee XJ Trucks 4X4 Offroad Headlamp Replacement H6054 H5054 H6054LL 69822 6052 6053 https://www.amazon.com/dp/B01M09C4FQ/ref=cm_sw_r_cp_apa_H4nWAbWB67Y6G

Congrats! I have the same bike. I just picked up this led headlight I know you asked for options to go with your current housing but they sell the headlight itself as well, I’m just not sure how the fit would be.

I got these, they aren’t the best headlights out there but they’re a HUGE upgrade over my stock ones https://www.amazon.com/dp/B06XRXTX32/ref=cm_sw_r_cp_api_15HSBbF72H0C3

What makes you so sure it is in the inside? It might appear to be but it usually isn't. I have used Meguiar's G3000 Heavy duty kit and worked great for me. Link

Are these yours? https://www.amazon.com/dp/B01B376YOE/

My aftermarket headlights have a broad light at night and not really focused on the ground even when I adjusted them down. Worst part is when they are on they mess with the radio performance. Googling says cheaply made lights put out noise that could affect radio frequencies. The previous owner of my jeep put them on and I just been living with them. I was willing to spend for the JW speaker ones but if I can save $400, more money for other mods, lol.

I ordered these.

​

If you search "7 inch rgb headlights" on Amazon, most of them should fit. I did have to bend the headlight housings a bit to get these particular ones to fit, but I've seen a couple users post ones that fit without modification. You might want to look for their posts if you don't want to bend the housings, although it only really adds an extra 5 minutes to the install time.

So it was converted by a shop in the Portland area, but they essentially just rigged up a couple Home Depot brackets to hold the speedometer in place:

http://imgur.com/tkcSpCP

http://imgur.com/hGMSl9h

http://imgur.com/wUkNzX1

And then I bough and installed this headlight unit:

https://www.amazon.com/dp/B078MVXJBL?ref=ppx_pop_mob_ap_share

All things considered it looks pretty good I think!

Thank you. I got them from Amazon, thanks to another member's post. Here's a link for you.

https://www.amazon.com/Osram-Headlights-Wrangler-Cherokee-H6054LL/dp/B06XRXTX32/ref=lp_14355767011_1_5?srs=14355767011&ie=UTF8&qid=1500666526&sr=8-5

I got them on amazon. They seem pretty good so far and they took maybe an hour to install.

​

Sure thing! This is the set I got.

When you go to install them, you'll probably find your fog lights don't work at all because the polarity is reversed on the fog light's connector. Instead of cutting wires and splicing like other reviews on Amazon recommend, you can use a very sharp set of tweezers to grasp on either side of the pin to disengage its lock, side it out of the connector, and swap the pins within the connector. If you have trouble doing this during the install, feel free to ping me.

The headlights snap into a couple grooves in the headlight assembly. You might find that they don't quite fit into the grooves, and if so, you'll have to file down the headlight (preferred, but removes the anti-rust coating), or modify the headlight assembly. I opted to file down the headlight, inserting it first from the bottom, and noting that the inner portions of the tabs were hitting the outside of the grooves. After a few tries, I got it to fit in snugly.

Also, since I have the AEV front bumper, I can't remove my grill. This wasn't an issue, I was able to unsnap it and get it sort of out of the way and do the install with it still hanging there.

Finally, don't forget to aim your headlights afterwards (and probably foglights, too; mine are a little bit low still). There are a bunch of good guides out there. I ended up aiming mine about 6 inches lower than recommended because I'm lifted 4.5" and I don't want to blind people as much when I pull up behind them in traffic.

Here are some photos: https://imgur.com/a/mmuc9vj

[Dude, buy these.] (https://www.amazon.com/gp/product/B06XRXTX32/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) SAE/DOT approved for LED on Xjs is tricky to come by. These lights are amazing.

I have the link below. It's a generic Chinese LED light for $57. Install was somewhat difficult, as you have to retrofit it. The 919 headlight assembly is somewhat proprietary, but a 7" does fit. I had to order a '79 CB500 headlight ring from 4into1.com, as it's a universal 7" ring. You then have to clip/dremel off the tabs on top of the bucket, drill an additional hole on top for a top screw, and drill holes for the side screws, as the original screw holes do not line up. After that, you can install it, and I filled the gaps on the sides where the stock screws were with Flex-Seal and you can't tell that I had to drill additional holes.

Let me know if I can clarify anything!

https://www.amazon.com/gp/product/B074PQ8T2B/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Amazon is definitely hit and miss. I’ve had this one for a few years now on my 83 Goldwing. I highly recommend it. Some guys at Sturgis we’re wondering how I got a daymaker on my Honda...lol

Well...

"Fixable" and "easy" do not go hand in hand here.

My Thorens cover is better than it was, but still not great: I used a Maguiar's headlight polishing kit on it.

Did wonders! Did NOT remove deep scratches, and the only way to do that is with sandpaper. I basically got bored and didn't go back.

Meanwhile a friend who had a JVC table like my QL-A2 asked me to polish his cover. Damned if the thing didn't look brand spanking new...almost. The inside corners are a screaming bitch to get to, and the polish etches the plastic when you leave it on too long. I went through a whole freaking box of Q-Tips and got it to a pretty good sheen, but DAMN that sucked.

Anyway: fixable, YES. Easy: not really yes.

EDIT: You might ask far, far smarter people than me about this procedure. I intend to get my Thorens cover cleaned up when I quit being so lazy about it. I need advice: there may be a WAY better idea out there.

Is it this guy?. I'm in the states and I don't think there's a canadian tire for a great distance.

This is the one I bought and it's been great for the few days I've had it on: https://www.amazon.com/gp/product/B074PQ7DTK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Aftermarket headlights.
Xprite 7" Inch Round 80W 9600 Lumens Hi/Lo Beam Cree LED Headlights With Halo Ring Angel Eyes DRL For Jeep Wrangler JK TJ LJ 1997 - 2017 (DOT Approved https://www.amazon.com/dp/B00WL8X3HQ/ref=cm_sw_r_cp_apip_PkWcPShaURdlT

LED Headlights-7"/7 inch Round 50W Cree Hi/Lo Beam Motorcycle Driving Light with DRL Turn Signal Halo Ring Angle Eyes for Harley https://www.amazon.com/dp/B01MS8NK62/ref=cm_sw_r_cp_apip_r1qlDimLEGpZI

SKTYANTS 7" 7 Inch headlights Housing bucket for Harley Davidson motorcycle(black) https://www.amazon.com/dp/B073PXW2YC/ref=cm_sw_r_cp_apip_JrNw2Uj7KPHEU

Full disclosure I had my local dealer ship put this on, unfortunately. The wiring requires splitting to mount in the harness (I suppose not difficult to do but it's beyond my time/ability). They charged 3 hours of labor. Had them remove the old blinkers as well. They added on a small resistor to decrease the blink speed. So far it works well, but I need to take it apart because they had to grind it down a little to make space and I want it a little cleaner inside.

They are great! They turn amber for the turn signal.

http://www.amazon.com/Xprite-Round-Lumens-Headlights-Wrangler/dp/B00WL8X3HQ?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00

Do you have sealed beam or compound?

I put these in my 94' C3500 and they are brighter than the headlights on my 2018 honda clarity

EDIT: They are DOT certified and have a proper cutoff specifically to prevent "blinding people". It takes less than half an hour to aim them properly with the screw adjustment on every single vehicle ever made.

FYI, instead of paying 100s for new lights, you can spend 15-20 bucks and buy sanding kits for your lights to make them more clear. You tape around your lights with painters tape and you put the special buffers onto a drill and after about an hour you got clear lights. There are multiple kinds you can get, but here's one off of Amazon.com.

Thanks. These are the lights:

http://www.amazon.com/Blazer-C52CW-Quartz-Halogen-Light-/dp/B004L0AAQY/ref=sr_1_1?s=automotive&ie=UTF8&qid=1420575193&sr=1-1

They are mounted directly to the bumper, which had to be removed to easily drill the holes.

They are wired up to the relay for the high beams.

Thanks for the info! Got any pics of them lighting up the road?

Found em on Amazon for $180 a piece:
http://www.amazon.com/Truck-Lite-27450C-Headlamp/dp/B007ED7HNY/ref=sr_1_1?ie=UTF8&qid=1456945106&sr=8-1&keywords=xj+truck+lite

I used Meguires headlight kit on my previous car and it worked perfectly.

Edit: https://www.amazon.com/Meguiars-G3000-Heavy-Headlight-Restoration/dp/B004HCOE72

Any LED lights would do, I got these off of amazon for 90 bucks and they've been good, just remember to adjust the height so you dont blind oncoming traffic
https://www.amazon.com/dp/B01B376YOE/ref=cm_sw_r_cp_apa_i_k3NJDb53EMND1

Meguiar's G3000 is the kit that I used on my car before I put Lamin-X over them. Takes about 10-15 minutes (depending on how detailed you want to be) to clean up each headlight. It really makes the car look brand new, totally worth it.

Amazon has them in black (pair) and chrome as a single unit (you will need to buy a pair of them). I have the chrome one on my Harley and it works amazing.

These are the pair I picked up. I’m going to run them for a couple of days and see how well I/on coming traffic like them.

LX-LIGHT 7'' Round Black Cree LED Headlight High Low Beam for Jeep Wrangler JK TJ LJ CJ Hummber H1 H2 (Pair) https://www.amazon.com/dp/B01B376YOE/ref=cm_sw_r_cp_api_LLy1AbQ1CKTCB

Pick up a set of these. They have a real, honest to God beam cutoff and as such are much brighter than the ones you have. I had the same ones as you for a few months and hated them. Have the projector ones now and they're amazing, and have a solid cutoff and even a DOT mark on the lens.


It's not about the brightness, it's about the cutoff and you are 100% going to blind people with those whether you think so or not.

They're angel eye lights that I honestly bought off of Amazon. I love them to death: https://www.amazon.com/dp/B06XRXTX32/ref=cm_sw_r_cp_apa_gifNAbN46TC7F

Nothing factory can really match a light bar, or a portable sun as I like to call them. But LED sealed beam replacements, especially if you are willing to pay like $300 for a set of these, are really damn bright.

I converted my SFV650 to this light and an eBay 7" bucket and am happy with the results.

I rolled the dice and went the cheap route and I couldn't be happier.

They are bright as hell, one drawback is that the LEDs are not hot enough to melt heavy/wet snow. If you are driving in harsh conditions for a longer period of time at night, you may have to get out and wipe the headlights off. This will happen with most LED headlights that don't have lense heaters.

This is the reason I keep the halogens in the IPF fogs, just in case i need the light and I cant get out of the cab.

The customer service from the Amazon seller is excellent. I had a busted seal on one of the lights (Condensation on the inside after power washing) and I sent them a picture and they sent me a new set of headlights in 2 days for free. No problems so far with these new lights. The JW Speaker Headlights are $500+, these are $129. Some people say that you pay for what you get, and that true most of the time, but in my experience these lights are a bargain.

Did you get these exact ones? They're sitting in my Amazon cart until I'm ready to spend the cash: https://www.amazon.com/gp/aw/d/B06XRXTX32/ref=ox_sc_act_image_1?smid=A3MXHV4BORYGO2&psc=1

If you want two lights on the bumper, Amazon has these for $10. They look KC lights and the KC covers will fit.

I used these https://www.amazon.com/gp/product/B07BWBRDJ5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

​

They put out good light, aren't blinding when you drive towards me, and aren't goofy looking.

He posted amazon link: https://www.amazon.com/dp/B06XRXTX32/ref=cm_sw_r_cp_api_UlVMAbAKV47S0
above, looks like 100 bucks for the pair.

Amazon is loaded with them; for example - these are $90 - https://www.amazon.com/dp/B01B376YOE/ref=psdc_318323011_t2_B07HPGMZ6N and I have seen lights as lows as $60 and much much higher. Just make sure they either have an anti flicker built in or if you need to order them separately. Either way nice jeep!

Thanks, these are my LED headlights.

Thanks bro. I gotchu homie

https://www.amazon.com/gp/aw/d/B074PQ8T2B/ref=mp_s_a_1_2?ie=UTF8&qid=1517584040&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Bicyaco&dpPl=1&dpID=51HYxz58PcL&ref=plSrch

https://www.amazon.com/Meguiars-G3000-Heavy-Headlight-Restoration/dp/B004HCOE72

Get this, you can get it from walmart or whatever. follow instructions = nice headlights

They are the LED headlights from Truck-Lite. Here's the Amazon link:

https://www.amazon.com/Truck-Lite-27450C-Headlamp/dp/B007ED7HNY

Edit: Just realized you weren't asking what the headlights were. Well, here's the link for anyone who wanted to know anyway...

I've been using this:

Meguiar's Heavy Duty Restoration kit; Only thing it requires is a Power drill and masking tape.

I'm sure there are guides and other products to give you better results; but this works well for me and has lasted awhile. At most, they get very slight oxidation; either that or it's just me looking for flaws.

Album of before/after

As someone with an older truck, with plastic headlights that get that haze over them. Meguiars Headlight Restoration kit had mine cleaned up and looking/functioning like new.

Also, my black plastic fender flares had oxidized, and hitting them with a magic eraser got them back to looking new.

https://www.amazon.com/dp/B07BWBRDJ5/ref=cm_sw_r_cp_api_i_Xo4sDbN09JYV0 I like them a lot.

Prolly some sort of light abrasive like toothpaste or that car stuff by Meguiar's made to for restoring plastic car light covers.

https://www.amazon.com/dp/B06XRXTX32?ref=ppx_pop_mob_ap_share

I know at least 10 guys with these. They’re plug and play. And they’re briiiiiiiiiiiight

Harbor Freight ...that says it all. You get what you pay for. Invariably the kit is made in China ....

Buy a decent kit from the likes of Meguires:

http://www.amazon.com/Meguiars-G3000-Heavy-Headlight-Restoration/dp/B004HCOE72

I have a pair of LEDs with cut-off I got from Amazon. Really nice for that I paid, but if you have the budget get the real trucklite LEDs.

https://smile.amazon.com/gp/product/B06XRXTX32

I got this one, works quite well.

SKTYANTS 7" 7 Inch led Headlights with 7 inch Housing Bucket DRL Turn Signal Lights Motorcycle for Harley Da-vidsion https://www.amazon.com/dp/B078MVXJBL/ref=cm_sw_r_cp_apa_i_1dYwDb2GWFVBQ

Rust-preventative coating. I like the light oil varieties like Fluid Film and Krown. Mist the insides of the tailgate, doors, and rocker panels too.

Weathertech mats everywhere.

High quality LED lights all around. Don’t cheap out on the headlights, or you’ll blind everyone on the road. These are decent.

Sure.
https://www.amazon.com/gp/product/B01B376YOE/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Look like TruckLite (Not sure if that's the proper light for our Jeeps - was just a quick amazon search). Sure light up the road, but be warned that they're useless if you live somewhere with a good amount snow.

Got these on Amazon. They jwspeaker knock offs but they're pretty damn goodAmazon link.

They are awesome. You will also need some anti flicker devices, buy two of the anti flicker because they come in a one pack.

https://www.amazon.com/gp/aw/d/B015SL0MSK/ref=yo_ii_img?ie=UTF8&psc=1

https://www.amazon.com/gp/aw/d/B01A8971E0/ref=yo_ii_img?ie=UTF8&psc=1

Just some cheap Amazon headlights.

https://www.amazon.com/Headlights-Wrangler-Cherokee-H6054-H6054LL/dp/B06XRXTX32/ref=mp_s_a_1_6?keywords=xj%2Bheadlights&qid=1562626582&s=gateway&sr=8-6&th=1&psc=1

From Amazon. It was this one:
7inch Round 50W Cree LED... https://www.amazon.ca/dp/B01MS8NK62?ref=ppx_pop_mob_ap_share

I picked them up off of amazon.

https://www.amazon.com/gp/product/B06XRXTX32/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I purchased these ones after someone else on this sub recommended them. https://www.amazon.com/gp/aw/d/B01B376YOE/ref=mp_s_a_1_1?ie=UTF8&qid=1524147376&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=lx+cree+headlight&psc=1

They do make a huge difference, but I only drove for a few seconds last night to test the alignment (still gotta fix that today.)

Right here


Just a side note, I had to cut into a part when installing. If you have any questions if you do decide to get em, please hit me up.

Yep (Pair) 5''x7'' 6''x7'' High Low Beam Led Headlights for Jeep Wrangler YJ Cherokee XJ H6054 H5054 H6054LL 69822 6052 6053 with Angel Eyes DRL (Black 105w Osram Chips) https://www.amazon.com/dp/B06XRXTX32/ref=cm_sw_r_cp_api_UlVMAbAKV47S0

These

https://www.amazon.com/Aukmak-Headlights-Multicolor-Bluetooth-1997-2017/dp/B072563VPN/ref=sr_1_1?keywords=7inch+halo+headlights&qid=1562867843&s=arts-crafts&sr=1-1-catcorr

Here ya go.

Headlights:
https://www.amazon.com/dp/B015SL0MSK/ref=cm_sw_r_apa_sN1zxbR2C70EG

Fog lights:
https://www.amazon.com/dp/B015WIRRV4/ref=cm_sw_r_apa_cP1zxbWSVR6H6

Used Meguiar's G3000 Heavy Duty Headlight Restoration Kit

https://www.amazon.com/dp/B004HCOE72/ref=cm_sw_r_cp_api_iWnuxbFTBMFWH

(Pair) 5''x7'' 6''x7'' High Low... https://www.amazon.com/dp/B06XRXTX32?ref=ppx_pop_mob_ap_share

SAMLIGHT Led Light Bar 2 PCS... https://www.amazon.com/dp/B077VDYFWW?ref=ppx_pop_mob_ap_share

MICTUNING MIC-B1002 LED Light Bar... https://www.amazon.com/dp/B00O72R7Z8?ref=ppx_pop_mob_ap_share
Wiring harness for the fog lamps

Amazon listing w/ specs in description. Anything in particular I could test, see real world results?

Got them here!
https://www.amazon.com/dp/B06XRXTX32/ref=cm_sw_r_cp_apip_TL6XybISz9PSA

http://www.amazon.com/Truck-Lite-27450C-Headlamp/dp/B007ED7HNY

Yup.
https://www.amazon.com/dp/B01MS8NK62

DOT 7 Inch Motorcycle LED Headlight for Harley Davidson Electra Glide Street Glide Fat Boy Road King Heritage Softail Switchback Headlamp Black https://www.amazon.com/dp/B074PQ8T2B/ref=cm_sw_r_cp_apa_i_9a2wDbCTHJGA2

LED Daymaker Headlights-7"/7 inch Round 50W Cree Hi/Lo Beam Motorcycle Driving Light with DRL Turn Signal Halo Ring Angle Eyes for Harley Davidsion https://www.amazon.com/dp/B01MS8NK62?ref=yo_pop_ma_swf

7x6" inch Halo LED Headlights
https://www.amazon.com/dp/B075XL75ZC?ref=ppx_pop_mob_ap_share

I was thinking of this one.

SUPAREE 7 inches LED Motorcycle Headlight for Harley Davidson Touring Road King Ultra Classic Electra Street Glide Tri Cvo Heritage Softail Slim Deluxe Fatboy Chrome https://www.amazon.com/dp/B01MS8NK62/ref=cm_sw_r_cp_api_i_yDTCDbHXS5KSY

https://www.amazon.com/Truck-Lite-27450C-Headlamp/dp/B007ED7HNY

https://www.amazon.com/Truck-Lite-27450C-Headlamp/dp/B007ED7HNY/ref=mp_s_a_1_fkmr0_2?ie=UTF8&qid=1539877669&sr=8-2-fkmr0&pi=AC_SX236_SY340_FMwebp_QL65&keywords=xj+trucklite

Note: the price listed is per lamp. Not per pair

These ones?

(2 Pcs) 5" x 7" 6x7inch Rectangular LED Headlights for Jeep Wrangler YJ Cherokee XJ Trucks 4X4 Offroad Headlamp Replacement H6054 H5054 H6054LL 69822 6052 6053 https://www.amazon.com/dp/B01M09C4FQ/ref=cm_sw_r_cp_api_L0N6yb879XYEF

here ya go

Those would be my Truck-Lite LEDs.

Truck-Lite (27450C) Headlamp https://www.amazon.com/dp/B007ED7HNY/ref=cm_sw_r_cp_apip_AKsZ2tDOQjO9y

This is one of them

2018 New Osram 110W 5x7 Led... https://www.amazon.com/dp/B07BWBRDJ5?ref=ppx_pop_mob_ap_share

LX-LIGHT 7'' Round Black Cree LED Headlight

This?

Is one of the wires in the old turn signal unnecessary? Can I just splice one of them to my new turn indicators.

​

This is the product https://www.amazon.com/gp/product/B078MVXJBL/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

LX-Light, made for a Jeep: https://www.amazon.com/gp/product/B06XRXTX32

https://www.amazon.com/gp/aw/d/B007ED7HNY/ref=mp_s_a_1_3?ie=UTF8&qid=1522592859&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=trucklite+27450c&dpPl=1&dpID=5187T5%2BWz3L&ref=plSrch

Dawg

https://www.amazon.com/gp/aw/d/B075XL75ZC/ref=ppx_yo_mob_b_track_package_o0_img?ie=UTF8&psc=1

Check this out at Amazon.com
2017 New 5''x7'' 6''x7'' 85w Osram High Low Beam Led Headlights for Jeep Wrangler YJ Cherokee XJ H6054 H5054 H6054LL 69822 6052 6053 with Angel Eyes D https://www.amazon.com/dp/B06XRXTX32/ref=cm_sw_r_other_apap_YlIvfQ4jMUIcc

non-existant. I've attached a link to the Headlights. Theses are not specific to my bike so I had to do cut the plugs out and connect the wires manually, and I believe they are done right.

I have these and have no RFI issues and I run multiple ham radios covering a multitude of frequencies. I was worried that they would wipe everything out but it was not an issue.

https://www.amazon.com/dp/B07BWBRDJ5/ref=cm_sw_r_cp_awdb_t1_oYCXDbKSMNVV0
I don't have these, but bleepinjeep did a review of them and they aren't the best LED headlights but they are incredibly cheap.

I got them off Amazon, they're a little spendy but they're a projector type and the low beam has a cut off so they are dot approved.
(Pair) 5''x7'' 6''x7'' High Low Beam Led Headlights for Jeep Wrangler YJ Cherokee XJ H6054 H5054 H6054LL 69822 6052 6053 with Angel Eyes DRL (Black 105w Osram Chips) https://www.amazon.com/dp/B06XRXTX32/ref=cm_sw_r_cp_apa_kSYLBbEV92WY0

These bad boys.