Reddit mentions: The best gasket sealers
We found 88 Reddit comments discussing the best gasket sealers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 19 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 3.35 oz. Tube
- Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature Range -65°F to 500°F (-54°C to 260°C) intermittent
- Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, and differential covers
- Fit Type: Universal
Features:
Specs:
Color | Black |
Height | 8 Inches |
Length | 1.38 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.1 Pounds |
Width | 3.81 Inches |
2. Permatex 81160 High-Temp Red RTV Silicone Gasket, 3 oz
- Formulated For Hi-Temp Applications, Or Heavy-Duty Use
- Replaces Almost Any Cut Gasket, And Coats Pre-Cut Gaskets To Increase Reliability
- Makes Reliable 'Formed-In-Place' Gaskets That Resist Cracking, Shrinking And Migrating
- Temperature Range Of -65F To 650F Intermittent
Features:
Specs:
Color | Red |
Height | 8 Inches |
Length | 1.25 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.2 Pounds |
Width | 3.81 Inches |
3. Permatex 82194 Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker, 3.5 oz.
- Designed specially for high-torque and high vibration applications
- Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids
- Low odor and non-corrosive formula
- Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings
Features:
Specs:
Color | Grey |
Height | 8 Inches |
Length | 1.25 Inches |
Number of items | 1 |
Size | 3.5 Ounce (Pack of 1) |
Weight | 0.26 Pounds |
Width | 3.81 Inches |
4. Vibra-TITE 470 DriveGrip Anti-Cam Out Fluid, 15mL Tube
- Helps prevent fastener slippage, thereby sparing the time and expense involved with drilled-out screws, easy-outs, and retapping
- Increases grip strength between fastener head and tool by as much as 700 percent, virtually eliminating tool wear, rounding, and deforming of fasteners
- Works with all types of screwdrivers, hex keys, pliers, channel locks, sockets, and more
- Helps reduce fatique and extreme effort that may lead to injury
- Odorless, non-toxic, non-corrosive, wipes clean without staining, and won't irritate skin
Features:
Specs:
Color | Original Version |
Number of items | 1 |
5. AST-RTV 27110 Food Grade White 100% Silicone Adhesive/Sealant/Instant Gasket, 10.3 oz. Cartridge
Superior caulking, bonding and sealing qualities, easier to use than other gasketing methods, will not sag, run off, or shrinkResists chemicals, temperature extremes, weather, vibration, moisture and ozone, Functions in hundreds of applications as a specialty sealant and flexible adhesiveExcellent n...
Specs:
Color | Food Grade White |
Height | 3 Inches |
Length | 11 Inches |
Number of items | 1 |
Weight | 0.75 Pounds |
Width | 3 Inches |
6. Genuine Toyota Fluid 00295-00103 Formed-in-Place Oil Pan Gasket - 3 oz. Tube
Sets to form an elastic body which is not affected by vibration or impactMaintains a stable rubber body over an operating temperature range of -76°F to 482°FHighly resistant to engine oil, various chemicals and coolantUse on the water pump, oil pan, valve cover, engine head, fuel pump, thermostat ...
Specs:
Height | 0.7 Inches |
Length | 7 Inches |
Release date | March 2013 |
Size | 3 Ounce |
Width | 2.6 Inches |
7. Gasgacinch 440-A Gasket Sealer and Belt Dressing, 4 oz
Gasgacinch Gasket Sealer and Belt Dressing provides unmatched gasket sealing properties, preventing leaks, reducing expensive repairs, and creates a superior grip as a belt dressingGasgacinch Gasket Sealer remains flexible and makes it easier to assemble and disassemble an engine or transmission, of...
Specs:
Color | white |
Height | 2.1 Inches |
Length | 3.5 Inches |
Number of items | 1 |
Size | 4 Ounces |
Weight | 0.35 Pounds |
Width | 2.1 Inches |
8. K&W 401612 Copper Coat Aerosol - 9 Wt Oz
High temperature, high quality aerosol metallic gasket sealer.Prevents compression loss on premium gasketsIdeal for head and intake gasketsGoes on tacky to hold gaskets firmly in placeContains copper for long lasting and high temperature applications
Specs:
Height | 6.38 Inches |
Length | 2.63 Inches |
Number of items | 1 |
Size | 9 Ounce |
Width | 2.63 Inches |
9. Permatex 85420 Permashield Fuel Resistant Gasket Dressing & Sealant, 2 oz Tube
- Resistant to gasoline and all other automotive fluids
- Remains flexible even at high temperatures and withstands rapid temperature changes
- Allows for repeated disassembly and resassembly in metal to metal applications
- Versatile and vibration resistant, this tacky formula allows for unlimited assembly time
- Seals surface imperfections
Features:
Specs:
Color | Orange |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Release date | April 2012 |
Size | 2 Ounce |
Weight | 0.18 Pounds |
Width | 0 Inches |
10. Permatex 22071 Water Pump and Thermostat RTV Silicone Gasket, 0.5 oz., 0.5 Ounce
- Sensor-safe, noncorrosive RTV silicone gasket material formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in an RTV silicone
- Superior adhesion and flexibility; can be used as a gasket maker or dressing
- Temperature Range: -65°F to 500°F (-54°C to 260°C) intermittent
- Suggested Applications: Water pump and thermostat housings
Features:
Specs:
Color | blue |
Height | 6.5 Inches |
Length | 0.63 Inches |
Number of items | 1 |
Size | 0.5 Ounce |
Weight | 0.1 Pounds |
Width | 2.81 Inches |
11. Permatex 80011 Form-A-Gasket #2 Sealant, 11 oz., Pack of 1
Slow-drying, non-hardening sealant approved for use in aviation as well as automotive applicationsDesigned for dressing/sealing cut gaskets on flexible/stamped partsAllows for easy disassembly if required; resists gasoline, oil and greaseTemperature Range: -65°F to 400°F (-54°C to 204°C)Suggeste...
Specs:
Color | white |
Height | 8 Inches |
Length | 2.25 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.79 Pounds |
Width | 2.25 Inches |
12. Permatex 80022 Sensor-Safe Blue RTV Silicone Gasket Maker, 3 oz. Tube
- Effectively replaces almost any cut gasket
- Makes reliable 'formed-in-place' gaskets that resist cracking, shrinking and migrating
- Coats pre-cut gaskets to increase reliability without fouling oxygen sensors
- Temperature range of -65 degrees fahrenheit to 500 degrees fahrenheit intermittent
- Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans
Features:
Specs:
Color | Blue |
Height | 8 Inches |
Length | 1.25 Inches |
Number of items | 1 |
Release date | March 1997 |
Size | Pack of 1 |
Weight | 0.1 Pounds |
Width | 3.81 Inches |
13. Three Bond Engine Silcone Gasket 1211 - 3.5oz. TB1211
Tough durable sealer utilizing silicone rubberSemi-hardening3.5oz.For case order 6
Specs:
Color | black |
Height | 2.8 Inches |
Length | 8 Inches |
Weight | 0.3 Pounds |
Width | 5.6 Inches |
14. Permatex 80019 Aviation Form-A-Gasket No. 3 Sealant, 4 oz.
Slow-drying, non-hardening brush-top sealantResists gasoline, oil and greaseApproved for use in aviation as well as automotive applicationsSuggested Applications: Close-fitting machined surfaces, sealing hoses, solid gasketsTemperature range of -65F to 400F
Specs:
Height | 2.75 Inches |
Length | 2.44 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.35 Pounds |
Width | 2.44 Inches |
15. Permatex 80062 High Tack Gasket Sealant, 4 oz.
Reliable, fast-drying, all-purpose sealant dries to a highly tacky, non-brittle film; remains tacky indefinitelyTacky paste for holding cut gaskets in place during assembly; helps seal cut gasketsResists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane; sensor-safeTemperature Range...
Specs:
Height | 2.75 Inches |
Length | 2.44 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.29 Pounds |
Width | 2.44 Inches |
16. Permatex 81878 3 Oz Ultra Copper RTV Silicone Gasket Maker
Specs:
Color | Black |
Height | 8 Inches |
Length | 2.6 Inches |
Size | 2-Pack |
Weight | 0.26 Pounds |
Width | 3.8 Inches |
17. Permatex 85144 The Right Stuff Grey Gasket Maker, 7.5 oz.
- Designed to perform under higher torque loads associated with engines that have closely spaced bolt patterns, such as those typically found in import vehicles
- Blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute
- Sensor-safe, seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms precut gaskets
- Resistant to powertrain fluids such as ATF, oil, and coolant
- Withstands temperatures to 450F continuous, and 500F intermittent
Features:
Specs:
Height | 10.06 Inches |
Length | 2.19 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.65 Pounds |
Width | 2.19 Inches |
18. BlueDevil Head Gasket Sealer (38386)
- Good for Head Gaskets, Warped or Cracked Heads, Heater Cores, and Freeze Plugs
- Contains no solid or particulate matter that can harm a vehicles engine
- Alternative solution for costly and time consuming repairs
- Safe and easy to use
- Permanent Repair
Features:
Specs:
Color | blue bottle / yellow label |
Number of items | 1 |
Release date | September 2014 |
Size | 1 Pack |
Weight | 2.87 Pounds |
19. Permatex 81878 Ultra Copper Maximum Temperature RTV Silicone Gasket Maker, 3 oz. Tube
- Most advanced, high temp RTV silicone gasket available
- Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets
- Sensor-safe, low odor, and non-corrosive with superior adhesion
- Temperature range -75F to 700F intermittent
- Suggested Applications: Exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermostat housings
Features:
Specs:
Color | Copper |
Height | 8 Inches |
Length | 1.38 Inches |
Number of items | 1 |
Release date | November 1997 |
Size | 3 Ounce Tube |
Weight | 3.3 Pounds |
Width | 3.81 Inches |
🎓 Reddit experts on gasket sealers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where gasket sealers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
>Silicone: I see clear silicone used a lot. Any recommendations?
Get the RTV high temp - I use clear 100% Silicone from GE available at Wal-Mart and it fails after only a few uses, most auto stores will have the RTV high temp silicone.
$5.30 on Amazon! Gotta love Amazon Prime, very worth it for the small purchases that show up in 2 days.
>Jars: You are going to want a supply of Quart jars. Extra lids eventually too. Buy them anyplace.
I'd specify wide mouth for cakes, regular mouth for spawn. I use wide mouth exclusively, just as a personal preference. I can make cakes of any size, or spawn for that matter!
>Ty-vex: Get them from the post office for free.
Just a silly thing, 'Tyvek' as opposed to 'Tvvex'. It's this one when you go to the post office.
>Petri Dishes: (glass plastic?)
You'd think glass, but no. I can't justify the cost vs the amount of petri dishes I need to work with. I prefer the '4 section' petri dishes for expanding cultures or when receiving a new culture. That way you can quickly expand it if it's clean or isolate away from contaminants on the same dish, instead of using multiple. For presentation, I prefer the dishes that /u/SmellyTongues sends me from Cell Treat. Wow, they're beautiful! They stack very nicely, and seal much better than the cheap 4 section ones I've bought off of Amazon.
>Bags for Pressure cooker?
What? Are you referring to filtered patch bags for growing?
>masks, gloves
I'll be doing a write up soon about sterile operating procedure which I'll get shortened to SOP in context of this hobby, which should encompass the basics. Good, solid gloves are a must, you're working with seemingly dull jar lids, but they'll slice right through gloves. Get some good ones, or you'll end up owning several pairs with slices in them rendering them effectively useless IMO.
For masks, I've tried the free ones you get from the hospital and compared to the expensive painters dusk masks of the same build but much better quality. I used my electronic cigarette to take in a mouthful of vapor - covered my mouth snugly with each mask (one at a time) and exhaled. The results were easily apparent as the one I paid for only allowed a small amount of vapor out through my chin whereas the other was expelling vapor out the entire perimeter of the mask. I do have a gas mask, but I've not found a problem using my dust masks repeatedly over and over.
>anything else?
Might be able to include this in the dehydrator section, but 'Dririte'/'Damprid' or any similar product would be a good idea. Here's a link to amazon.
I personally use silica packets for storage, you could make your own with these or build a simple decanter using a bowl with a lid, a rack to elevate the fruits above the crystals in the bowl, and 24 hours.
Supposedly "over 1000 photographs on over 1000 pages". If it's their printing, it's gonna be a great presentation. He also corrected every detail he found that was inaccurate in the first printing.
I'd love another old 74 (even a generator Shovel would be fine) to build and go through. I'm conflicted though... I've planned on buying and building a late FXR ('89-94) into a hot rod, but after our discussions I'm wondering if I shouldn't put that money into another 74 (next year for all of this). The FXR will be more gratifying for wheelies and such and doing burnouts in front of my bitch mother in law's house, but a 74 would just be, well, a 74, with all the joy of wrenching and riding that brings with it. If you keep posting photos as you go through the program, it'll help me decide on the 74.
By the way, it is my opinion that Gasgacinch (gorilla snot) is the best stuff going for case halves. It also works wonderfully as a rubberizing coat for paper or asbestos gaskets when putting together older bikes with warped or dinged gasket surfaces. Get a can and add it to your tool box. I'm pretty sure it's liquid latex, but who knows. A thin coat on both sides of the gasket (that you let dry before assembly: 5 minutes or less) will seal any scratches or dings in old cam covers, primary covers, rocker box covers, ratchet lids, kicker covers, and so on. For case assembly, a not-so-thin film on either side of the case halves that's allowed to mostly dry before assembly will seal the cases tighter than anything else I've found. The Permatex #2 works fine but I don't like the color. I'm just partial to the gorilla snot. NEVER had a leaky case or treated gasket with it.
Since you like tips, my "essential goopy stuff" box has these things in it... always-
Copy and paste and print it out and go shopping. :)
Valid concerns but trust me it’s a breeze to do. Given how hot your CPU gets you will benefit from a proper delid. Granted though you are still within safe temps. The temps are highish but they aren’t abnormal compared to most others. Higher temps do lessen the life of the CPU but we are talking a very small time span compared to the market life of the chip. I’d say you and 99% of all PC builders will have build a second or even third computer before silicone degradation even reaches minimal levels. If that makes sense. Yeah high temps kill it but it’s like saying the three cigarettes you smoked in high school took two minutes off your life when you live to be a hundred anyway. Analogy might be to the extreme but I wouldn’t worry about it.
With that said here’s some links that will help you.
Delid tool and re attachment tool:
https://rockitcool.myshopify.com
Plastic razor blades to remove stock glue (what you mentioned not knowing what to do with, yes remove it the easiest way I’ve done it was using these and a small amount of isopropyl alcohol):
https://www.amazon.com/dp/B01D6EXLR0/ref=cm_sw_r_cp_apip_nvYleOEGfw2EO
Silicone “glue” for IHS re attachment. To be honest the very first delid I did was a 3570k using wood a vice and a hammer and I didn’t reglue it. It’s still alive too. I would personally just use a very small amount on the four corners. Just enough to stick. You are correct in your concern about the stock glue causing the IHS to not make perfect contact with the die. Remove the stock crap and use minimal amount of this and it will be a non concern:
https://www.amazon.com/dp/B0002UEN1A/ref=cm_sw_r_cp_apip_2g9BJXXKzhp9F
Lastly, your liquid metal for the die to IHS and your TIM for the IHS to Kraken. You can use any but it’s probably safe to say Grizzly is currently the go to stuff:
https://www.amazon.com/dp/B011F7W3LU/ref=cm_sw_r_cp_apip_6QNoes1d24uyu
https://www.amazon.com/dp/B01A9KIGSI/ref=cm_sw_r_cp_apip_lBeHQg1WHWPGP
All in all it’s easy and it’s worth it. If you have any questions whatsoever message me or reply here. There are some good videos of walkthroughs (I think one really good one is on rockitcool’s website but I’m not sure). I can find them for you but tomorrow as I’m currently in bed and using a half open eye lid to write this.
It's easy lift the frame, don't remove back, just the front long bolt. Stick the front wheel in a milk crate. I can have a carb in and out pretty quickly.
Where is this airleak? I've never had a prob with an airleak at the carb on any of my hobbits...and i've owned a bunch of them.
Try this stuff: http://www.amazon.com/Permatex-80062-High-Gasket-Sealant/dp/B000HBGHB8/ref=sr_1_2?ie=UTF8&qid=1407247928&sr=8-2&keywords=gasket+sealant (you can get at local autostore)
from the intake of the cylinder to the intake itself, from intake to carb.\
It's also great for base gaskets too! Creates a good gas resistant seal, while not being permanent for easy removal later. Better then silicone crap that just squeezes out of the mating area.
IMO, the phva is just going to run like shit on a hobbit. The stock carb pushes the best velocity of gas/air to that cylinder on a hobbit.
Also not having an airfilter could potentially cause problems by not have any back pressure. I've always ran the stock airbox with my stock carb other wise, they would run like shit.
RTV Silicone
https://www.amazon.com/gp/product/B000HBGI8K/
However the trick to making it easy to remove and easy to -delid a second time- with just your fingers (like let's say you messed up the LM) is to apply four VERY small dabs in each corner of the IHS, when using the relid kit. Each dab should be no larger than the size of a pin-head. If you made it the size of a grain of rice, that's a bit too much. If you can't measure or haven't seen a pinhead, half a grain of rice in size would be a good estimate :) Make sure when you delid the first time, you remove all of the original black goop Intel used. Some people also recommend sanding the entire edge of the IHS until the square ring is copper colored, to make sure it's flat.
Super glue is far too brittle to work with a silicone like the loop is made of. A better option would be a silicone adhesive like this: http://www.amazon.com/Permatex-82180-Maximum-Resistance-Silicone/dp/B0002UEN1U .
The problem is that as the loop stretches the super glue would not stretch with it, causing stress and cracking in the cured super glue layer.
I've been looking at the Rockit 88 for several weeks, and every time I check the website it is out of stock. How long did you have the check for stock before you were able to place an order?\
EDIT: They are back in stock!!! I checked two hours ago and there was still a message about a backorder, but they are now in stock!!
Edit2: Links for those interested:
Here’s the link of the glue:
https://www.amazon.com/Permatex-82180-Maximum-Resistance-Silicone/dp/B0002UEN1U/ref=mp_s_a_1_3?ie=UTF8&qid=1541959052&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=permatex+gasket+maker&dpPl=1&dpID=51L1E4q5CaL&ref=plSrch
I’ve only tried delidding with the BoArt one, and I’d say the tool has high quality and definitely easy to use for anyone. The rockit88 also comes with the relid tool, but not necessary imo, since I simply applied 4 drops of the glue on each corner of the IHS and put the whole cpu unit back to motherhood, as the retention is strong enough to keep the IHS and PCB together. Lastly, the PRICE! The BoArt one costs only $12.99 compared with $45.99 for rockit88, so its ur choice! :)
Try going to an auto parts store and getting some silicone RTV, probably a small tube.
I could be totally off-base here, but that seems like it would have the desired effect. It's usually temperature resistant, and if you get it somewhere you don't want it, it usually scrapes off pretty easy. Not clothes, or hair unfortunately.
I think you're not supposed to get it on your skin. It'll dry/cure to a silicone gasket material. It's sometimes referred to as gasket maker.
No kidding? Man, that's a nice surprise.
Sorry, I thought you were saying "seal the crank pulse generator part with hondabond" not the entire cover lol.
Any guess as to how much i will need? Like will the 1.9fl oz be enough or should I get this off brand liquid gasket or are they basically the same thing?
Will I need a razorblade to remove the existing seal?
Sorry for the barrage of questions but thank you so much for the help already.
On my Big Green Egg I used a Rutland gasket and adhered it with Permatex ultra copper. This is a popular combination in Big Green Egg land. Many use 3m Super 77 spray adhesive instead of the Permatex.
The BGE is ceramic, not metal, but I don't see any reason why it shouldn't work. As with sticking anything to any surface, the most important thing is that the surface is clean.
Here's all my PC parts: https://pcpartpicker.com/user/thareaper/saved/#view=BCKsYJ
As for the silicone I went with this https://www.amazon.com/gp/product/B0002UEN1U/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I tried to put as little silicone on as I could around the edge so it wouldn't smudge everywhere. It worked pretty well. Hopefully you'll get results like I did!
Here's a link to the same bolt I bought: http://www.amazon.com/gp/product/B0040CRVD8 (comes in pack of 5).
It's the same type of bolt except a bit oversize, so you can re-thread the aluminum pan -- just do it slowly and be careful on the first try, perhaps even back out a few times.
I was in the same situation and found this to work. I haven't changed the oil again yet, but I'll make a point to be extra careful re-torquing next time.
One piece of advice I found was to use high temp sealant (http://www.amazon.com/gp/product/B0002UEN1A) on the bolt at every oil change, as insurance against any lose threading. But just judging form the feel of bolt, once you rethread it seams to be a pretty tight fit; you'd have to be careless to mess it up.
Good luck.
Looks like I may have miscopied it. Here it is
Looks like thingiverse was truncating the link for some reason. I used a shortener and that seemed to fix it. Thanks for pointing that out!
It's a parasitic power loss. I cut the belt on my '01 Accord about 4 years ago.
You should go ahead and replace the input shaft bearing on the transmission. If that's the original 277k transmission, then you're going to have to rebuild it at some point. It sounds more difficult than it is. Here's a list of all the unique parts/tools. You'll know your ISB (input shaft bearing) has failed when you hear a gross/grinding noise that disappears when you're stopped, engine is running, but have the clutch pedal pressed to the floor.
http://www.harborfreight.com/3-jaw-pilot-bearing-puller-4876.html
http://www.ebay.com/itm/151645763545
http://www.amazon.com/dp/B000NY8O6K
http://www.amazon.com/dp/B000HBGI8K
http://www.amazon.com/dp/B000N37CUK
Honda OEM replacement parts for the bearing and seal.
91216-PL3-005
91002-PS0-013
Or something like this might be ideal for you. Not for me though. I'm cheap :)
http://www.ebay.com/itm/301677670901
Agreed, the little "top hat" shaped grommets are great. Might also be able to use gasket maker if nothing else fits. (http://www.amazon.com/Permatex-F81160-Hi-Temp-Silicone-3-Ounce/dp/B0002UEN1A/ref=pd_sim_auto_1)
I am a recent convert with a 9" SBR and 762 SDN6, I'll throw my hat in for super versatile esp if you are going to get a can like you said you are planning to.
Suppressed subsonic is much lighter recoiling than 223, you're talking about muzzle energy equivalent to 45 acp and the suppressor acts a as super quiet, very efficient muzzle break. My only complaint would be gas in the face via charging handle however I just spent 6$ on Black Silicone RTVand made a homemade gasbuster charging handle. I've yet to take it the range since but it should cut back on or eliminate gas blowback to the face.
300 Blk can be hard to come by locally but is readily available on the internet and once you have brass is easily reloadable.
Toyota makes the nicest oil sealant I've seen they use it around the valve covers on the v-6's and that stuff is both easy to work with and very durable.
Here's the part number: # 00295-00103 - Genuine Toyota Formed-in-Place Oil Pan Gasket - 3 oz. Tube
https://www.amazon.com/Genuine-Toyota-00295-00103-Formed-Place/dp/B000EDDTV0
Silicone, once set up. The proper ones should say food safe or NSF approved. Careful with the ones that are mildew resistant
Here - example
https://www.amazon.com/AST-RTV-27110-Silicone-Adhesive-Cartridge/dp/B00K19YCX6/ref=sr_1_1?ie=UTF8&qid=1479253376&sr=8-1&keywords=nsf+silicone+sealant
Agree. Some purists will say to only get the gasket from Mazda. But considering the low price and effort of replacing the valve cover gasket, a Fel-Pro from Amazon should be just fine. You also need some silicone gasket goop for six potential leak spots. One tube should last practically forever.
It is and easy job, but you must be careful to not over tighten the bolts into your aluminum head. Torque to 43 - 78 inch-lbs. Also, tightening the bolts in the order recommended by Mazda will help avoid leaks. Use this guide: http://www.miata.net/garage/valvecover/
I honestly prefer this stuff here over the clear one.
Any 7700k delid tool should be good, rockit 88 is fairly common. This is a great thread if you need info/want to ask questions on delidding The process goes as such:
A couple dabs of RTV Silicone Sealant should work. Should be able to remove most of the residue with an exacto knife/box cutter blade when you when you want to take it off..just don't try to yank the bobblehead off, or dig into the dash with the blade. Keep it flat, work it back and forth. Nail polish remover may help with the residue. Or I'm sure there's some type of caulk removal product out there.
This stuff is great for sealing up the gas key.
Yes, but not the regular sealant. Use something like this; http://www.amazon.com/CRC-401612-Copper-Gasket-Compound/dp/B000M8NZ8E
If you use silicone make sure to use a good one.
An ultra grey automotive silicone should work fine and be a color close to original car color.
http://www.amazon.com/Permatex-82194-High-Torque-Silicone-Gasket/dp/B000HBGI8K
You can find it at any parts store but that is what I would use.
Yea it should be good for a bit. I did a new oil cooler and seals because the old one had a crack in it and made an absolute mess of things. New pushrod tubes and seals, valve cover gaskets, main seal, transmission input shaft seal. Basically everything I could get to without pulling the motor apart too far. Also, this stuff is your friend
I'm not 100% clear what the part is that has failed but if its metal then try JB-weld, if its plastic then some fuel-resistant RTV sealant might work well
like this:
https://www.amazon.com/Permatex-85420-Permashield-Resistant-Dressing/dp/B007VIGCJW
I've also read about Seal-all (and see another recommendation for it), its marketed as fuel proof.
http://eclecticproducts.com/seal-all.html
You'll just need a timing belt kit and water pump and you should be good to go. So $100. Don't forget the liquid gasket.
EZ Grip or this.
I have done probably a dozen of these. When disassembling, I have always found them sealed with silicone. I have also never had an issue with one leaking. I believe this is the stuff recommended in the service manual. If you look on the opposite end of that, I believe there is a small channel meant to be filled with the sealant.
Of course, if that kit did happen to have a gasket for that location in it, You could certainly use that.
thanks for pointing me in the right direction.
http://www.amazon.com//dp/B0002UEOPA
I would try this - https://www.amazon.com/gp/product/B00K19YCX6/ref=pd_bxgy_328_img_3?ie=UTF8&psc=1&refRID=SVYWYEN6B54TGCYR1XNR
Food grade silicone caulk. Supposed to be good up to 450 degrees. Let it cure for 48 hours.
black rtv like [this] (http://www.amazon.com/Permatex-82180-Maximum-Resistance-Silicone/dp/B0002UEN1U/ref=sr_1_1?ie=UTF8&qid=1453094641&sr=8-1&keywords=rtv+silicone)?
Maybe some Permatex #2 would help? It's the old standby for cooling system leaks.
https://www.amazon.com/Permatex-80011-Form-Gasket-Sealant/dp/B000HBM6NG
I’d search for the hole and put some flame retardant RTV over the hole.
Like this: Permatex 81160 High-Temp Red RTV Silicone Gasket, 3 oz https://www.amazon.com/dp/B0002UEN1A/ref=cm_sw_r_cp_api_RBlYBb9HRP754
Looks a lot like Blue RTV Silicone Gasket Maker
As others have stated, the timing cover itself will need a high temp, oil resistant gasket maker like red RTV.
The Yelloblade
Do you know the yelloblade? (All Shrek jokes aside).
This is the gasket maker. You do not need 3.5oz of gasket maker unless you're doing deliding projects left and right - or meant to use it for what it was actually meant for.
Thank you for replying so quickly! I thought that might have been the case also, but it appears that it uses this stuff here rather than an actual gasket.
Hmm, okay. This is what I purchased, exhaust manifolds is one of the product applications. Should be okay, right?
When you did the DIY gas buster CH did you use the red silicone? I want it to be black but I'm unsure if this is the same stuff or not:
https://www.amazon.com/gp/product/B0002UEN1U/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
I'm not sure, but I suppose I could tint it black later if I got the red...the black one has a slightly different name and I want to make sure it's the right/same stuff.
I'm about to check out walmart to see if they might have it for cheaper but I haven't been able to make it out yet.
I'm in the same boat. I dug around on the Overclocking subreddit and the overwhelming majority say to not re-seal. You might get better temps w/o sealant since the IHS and die will sit closer. If you plan on re-selling the CPU eventually you will need to use sealant.
I think I will use a few small drops of Permatex silicone just to make the CPU easier to install in the mobo. I don't want to deal with the IHS sliding around.
https://www.amazon.com/Permatex-82180-Maximum-Resistance-Silicone/dp/B0002UEN1U
this shit actually works if you want to give it a shot
https://smile.amazon.com/BlueDevil-Head-Gasket-Sealer-ounce/dp/B000NOO798/ref=pd_sim_263_3?_encoding=UTF8&pd_rd_i=B000NOO798&pd_rd_r=MGCPVAYY8G48R6XY7FYB&pd_rd_w=Jan53&pd_rd_wg=Y8clP&psc=1&refRID=MGCPVAYY8G48R6XY7FYB
https://www.amazon.com/Permatex-81878-Copper-Silicone-Gasket/dp/B01LZ7WZAT/
Here is the mobile version of your link
JB weld or some similar product.
Rtv sealant works. We use it all the time on glycol coolant lines with injection blow molding machines.
Edit: this shit https://www.amazon.com/Permatex-81160-High-Temp-Silicone-Gasket/dp/B0002UEN1A
Put a Rutland gasket on with permatex ultra copper rtv. You’ll never have to put another gasket on
Rutland Inc Gasket Kit Tape 7'x5/8" 95-6 https://www.amazon.com/dp/B000MIPB6S/ref=cm_sw_r_cp_api_i_H-DxDbD9RZRZZ
Permatex 81878 Ultra Copper Maximum Temperature RTV Silicone Gasket Maker, 3 oz. Tube https://www.amazon.com/dp/B0002UEOPA/ref=cm_sw_r_cp_api_i_l.DxDbSSQRWPR
For re-lidding? I used this.
https://www.amazon.com/Permatex-85144-Right-Stuff-Gasket/dp/B000HBNU4U/ref=sr_1_15?keywords=gasket+maker&qid=1569479122&sr=8-15
This:
https://smile.amazon.com/dp/B0002UEOPA/ref=cm_sw_r_cp_ep_dp_Z6dMAbCVK6JPM
was mentioned in this thing:
https://www.thingiverse.com/thing:2811140
I used THIS
It's high temp RTV
For some cars isn't a bit of liquid gasket required to replace a valve cover gasket in corners where the gasket might not seal as well?
https://www.amazon.com/Genuine-Toyota-00295-00103-Formed-Place/dp/B000EDDTV0
I used some high-temp gasket sealer on my smoker (different style), so if the leaking ever bothers you, give it a try. Temp on this one goes up to 650*F, so can be used in most spots on a smoker.
A little bit of RTV will seal that back up. While this is a temporary fix, I had ridden a Ninja 500 with a torn diaphragm using this fix for thousands of miles without noticing. YMMV
I use a seal cutter. Fairly simple to use, just use a rubber dead blow to wedge it in and then hit the side to push it around the block.
The thing to watch out for is there is a baffle installed between the oil pan and the bottom of the block, all of which is sealed with RTV (could explain why you’re seeing so much of it). Once you get it separated, the pan/baffle like to get caught up on the oil pick up tube so be carful when pulling it down.
As for the stud and nut combo rather than a bolt, that’s factory, and I’m sure there is suppose to be 2 studs.
When putting it back together, the best RTV to use would be Toyota F.I.P.G..
The passenger one is prone to leak more as it sits over the exhaust collector..
It's really not all that hard, the biggest issue is that unless you remove the timing covers, which means removing the timing belt. you have to tip the valve cover under the timing cover. Several tips:
Mine leaked, I put in new gaskets, it leaked, I resealed it, it leaked, I had the engine rebuild, it leaked, I used Threebond. It has been a couple years now, no leaks. I sear by the stuff now. People talk about the lack of space and it's not great like on an inline 4, but it's not the worst..
Three bond:https://www.amazon.com/Three-Bond-Engine-Silcone-Gasket/dp/B000GZR4QC/ref=pd_lpo_sbs_263_t_0?_encoding=UTF8&psc=1&refRID=4MJJYYACMDPR6WCCRM06
The type of wrench I mean: https://www.homedepot.com/p/GearWrench-10-mm-Reversible-Combination-Ratcheting-Wrench-9610N/202738029
https://www.amazon.com/Genuine-Toyota-00295-00103-Formed-Place/dp/B000EDDTV0
Here ya go, Toyotas use this as a oil pan gasket, not in addition to a real gasket just this stuff, I’ve used it plenty of times to hold various gaskets in place and never had a comeback due to a leak.
This.
As a Toyota tech we had to do this all the time.
This shit is magic. Highly recommended for your new gasket material: Genuine Toyota Fluid 00295-00103 Formed-in-Place Oil Pan Gasket - 3 oz. Tube https://www.amazon.com/dp/B000EDDTV0/ref=cm_sw_r_cp_api_i_cA3aBbQ7M9372
Aviation Form-a-Gasket.
I used to work on aircraft and I have a jar of this around from over ten years ago. It does not dry up or cure. It is like a messy tar. Outside, exposed, maybe dirt or dust would eventually form a skin.
Pro Tie 33529 SAE Size 48 Heavy Duty All Stainless Hose Clamp (Pack of 4), 2-9/16" to 3-1/2" https://www.amazon.com/dp/B00W6MBQIK?ref=yo_pop_ma_swf
LEDAUT 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties https://www.amazon.com/dp/B011B99B0I?ref=yo_pop_ma_swf
Permatex 81878 Ultra Copper Maximum Temperature RTV Silicone Gasket Maker, 3 oz. Tube https://www.amazon.com/dp/B0002UEOPA?ref=yo_pop_ma_swf
I use this: http://smile.amazon.com/Permatex-81878-Maximum-Temperature-Silicone/dp/B0002UEOPA
Sometimes the hot wax melts the hot glue and then the wick travels which can get mighty dangerous.
Nothing like a test run to find out. If it fails try this instead.
Normally you fill the gap with high temperature silicone sealant. Liquid tape usually can't handle the heat from being that close to the die.
This is true. I should clarify that OP should check for these things himself...like go do it right now..it seriously just takes a minute. if you don't see these signs....you PROBABLY don't have a blown head gasket.
but you SHOULD still take your car to a second mechanic to do a pressure test/blown head gasket check IMMEDIATELY for a second opinion/confirmation of whether you do or do not have one.
and they confirm there is one, and if it's in it's early stages, like you said....they have products like this that might fix it without having to spend thousands to tear the engine apart.
http://www.amazon.com/BlueDevil-Head-Gasket-Sealer-ounce/dp/B000NOO798
do not just go out and buy that and pour it into your engine by the way, go talk to a second mechanic. if they confirm you have one, ask them their opinions about it, etc. i just posted that link to show you that there are products to seal a head gasket leak if it's in early stage leaking, and not yet past the point of repair
my main point is that blown head gaskets can easily be mis-diagnosed, or intentionally mis-diagnosed to swindle people out of money. and if you do have one the cost of fixing it varies from $50 to "total loss, time to buy a new car" depending on the severity of the gasket leak.
It's leaking from under the under the gas block and around the gas tube. If it's leaking while it's new, it will only leak more over time. High-temp RTV would be a temporary fix. Don't get any in the gas port or inside the gas block. You can remove the gas tube and put some around the tube. Don't get any inside the tube.
I'm curious as to whether the barrel was dimpled for the set screws. Anyways, if the gas block and the barrel are not a good fit, your best bet would be to go with a clamp-on gas block--my preference over set-screw. There are a lot of options at just about every price range.
I would still check to see if there are any other issues with the gas system. Is the gas key staked? Is there any leakage between the gas key and the bolt carrier body? How tight are the gas rings between the bolt and the cylinder wall of the bolt carrier? If they're too tight, it might take some more shooting before they loosen up.
One more tweak to the products added to the breech seal and compression chamber air transfer port:
Use Permatex High Tack Gasket Sealant over the air transfer port, and use Elmer's No-Wrinkle Rubber Cement over the breech seal. This not only improves the seal just a little bit, but also keeps your thumb cleaner since you are pushing down on dried rubber cement instead of tacky gasket sealant when you load the pellets.
I'm now getting between 560 and 580 fps using 7.2 grain .177 Daisy Pointed pellets. That's about 5.2 FPE, which is not too shabby for a gun that can be found for $65.
My only problem now is that one of my two guns shoots high, even with the rear sight adjusted all the way down. This is the opposite problem that many reviewers deal with, where the sight won't go high enough, because the gun shoots low. I guess I'll try some heavier pellets in that gun and see if that brings the POI down. Not a bad problem to have though, I think.
BTW, I'm also posting stuff on the GTA Forums under the pseudonym "Whirligig." The Crosman folks suggested that I post my experiments and experiences with the Benjamin Trail Nitro-Piston air pistols there.