Reddit mentions: The best indoor string lights
We found 811 Reddit comments discussing the best indoor string lights. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 344 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. 9ft Blue Neon Glowing Strobing Electroluminescent Wire (El Wire)
- 9ft. Neon Blue Electroluminescent (EL) Wire (2.3mm)
- Battery Pack Controller - Off/On Mode
- Great for Parties, Raves, Costumes & Decorations
- Requires 3 "AAA" Batteries (not included)
Features:
Specs:
Color | Blue |
Height | 3 Inches |
Length | 5 Inches |
Weight | 0.15 Pounds |
Width | 3 Inches |
Size | 3 Meter EL |
2. econoLED 12V Flexible SMD 5050 RGB LED Strip Lights, LED Tape, Multi-colors, 300 LEDs, Non-waterproof, Light Strips, Color Changing, Pack of 16.4ft/5m Strips
- ☆ Easy installation:Self-adhesive back tape for secure and easy application for any clean, dry and flat surface. It can be cut every 3 LEDs along the cutting marks, without damaging the rest strips.
- ☆ Wide Application: The package come with strip only,not include Remote Controller and AC adapter.Color changing with 20 static single colors based on RGB and white color, with dimming and brightness controls is ideal for indoor and outdoor lighting decoration, such as kitchen, under cabinet, dining room, bedroom, party, patio, automobile, wedding, etc
- ☆ Save electricity:Low Power Consumption and extremely low heat. The working voltage is 12V, extremely low power, Long life span more than 50,000 hours.Safe to touch, without worry about getting shocked or burnt.It is touchable and safe to children.
- ☆ Cuttable and linkable: Led strip light can be cut between every 3 leds without damaging the rest strips.A power adapter and remote control is required but not included, please search "B01K1GKLLK and B01F3GZEGA" on Amazon if you need.
- ☆ BEST CUSTOMER SERVICE: If you are not satisfied with our strip lights, please feel free to contact us. We will provide friendly, easy-to-reach support. If you have any questions, please contact us first, we will provide you with the best quality service.
Features:
Specs:
Color | Rgb (Red, Green, Blue) |
Height | 5.7 Inches |
Length | 5 Inches |
Weight | 7.2 ounces |
Width | 0.6 Inches |
Size | 16.4ft |
3. DoDoLightness New 15FT 4 modes Battery Operated Neon Glowing Strobing Electroluminescent Wires,EL Wire… (3 Meter, blue1)
EL Wire is Non-Toxic. Perfect For Outdoor Party, Inside House DecorationCold to the touch, very durableJust add batteries and this kit is ready to go7Colors to select4 modes battery option
Specs:
Color | Blue |
Size | 3 Meter EL |
4. LED Finger Lights (40 pcs)
- 40 total finger lights in four different colors
- Elastic bands which make it easy to attach to your fingers
- Super bright LED lights: Red, White, Blue, Green
- Replaceable batteries: 3x AG3 cells per light, included!
Features:
Specs:
Color | style1 |
Height | 2.5 Inches |
Length | 8.7 Inches |
Weight | 0.26 Pounds |
Width | 6.2 Inches |
Size | 40 Pcs |
5. Logisys LDXRM12C 12-Inch Self Adhesive Flexible and Extendible Strip with Color and Pattern Changing Remote Control
FLEXIBLE LED STRIPSELF ADHESIVECOLOR CHANGINGPATTERN CHANGINGEXTENDABLE STRIP
Specs:
Color | Rgb (Red, Green, Blue) |
Height | 0.1 Inches |
Length | 12 Inches |
Weight | 0.1 Pounds |
Width | 0.4 Inches |
Number of items | 1 |
6. RTGS Products 30 LEDs Lights Indoor and Outdoor 9.5 FEET String Lights, Fairy Lights Battery Powered for Patio, Bedroom, Holiday Decor, etc (Cold White)
EXTRA LUMINOUS: 30 Super Bright Cold White Color LED Lights on 8.5 feet ultra thin silver color wire for indoor and outdoor use. There are 4 inches distance between LED bulbs and 12 inches clear cable between the wire and the battery box. TOTAL STRING LENGTH IS OVER 9.5 FEET.ENERGY EFFICIENT: Long l...
Specs:
Color | Cold White |
Height | 0.75 Inches |
Length | 2.25 Inches |
Weight | 0.1 Pounds |
Width | 3 Inches |
7. SUPERNIGHT WiFi Wireless LED Smart Controller Working with Android and iOS System Mobile Phone Free App for 16.4ft 300 LEDs RGB LED Light Strips Compatible with Alexa Google Home
- It is amazing to control your lights with smartphone! Now you can DO it!
- Controlling your LED lights with FREE APP
- Wifi LED controller work with Alexa Google Home
- You can use 1 App to control many wifi controllers at the same time
- You can make the lights lighting with the rhythm of music in your smartphone
Features:
Specs:
Color | White |
Weight | 0.04 Pounds |
8. Lychee RR-9FT-3M-B Neon Glowing Strobing Electroluminescent Wire, 9ft, Blue
- Battery Pack Controller: On/Off Mode
- Requires 2 "AA" Batteries (Sold Separately)
- 9ft 3m Neon Blue Electroluminescent (EL) Wire (2.3mm)
- Great for Parties, Raves, Costumes & Decorations
- Easy to install, Cool to the touch
Features:
Specs:
Color | Blue |
Height | 2 Centimeters |
Length | 15 Centimeters |
Weight | 0.110231131 Pounds |
Width | 15 Centimeters |
Size | 9ft |
9. Portable EL Wire 10 Feet Long (Purple)
- Riverhead Books
Features:
Specs:
Color | Purple |
Weight | 0.05 Pounds |
10. Set of 4 LED Light Strip Bar - Cool White Kitchen Under Cabinet Led Lamp Energy Saving Under Counter Lighting LED Strip Kit (Cool White)
Pack of 4 Cool White (6000K) Cabinet Strip Light Bar Set : Per light bar costs only 1.2 Watt, delivers 100 lumen , which is 400 lumens and 4.8W in total for each kit.Advanced technology: safer, ultra bright, amazing performance.Long life-span and low light decay,Bulb Life 50000.00 HoursEnergy Effici...
Specs:
Color | Cool White |
Height | 4.7 Inches |
Length | 16 Inches |
Width | 2 Inches |
11. Twinkle Star 300 LED Window Curtain String Light Wedding Party Home Garden Bedroom Outdoor Indoor Wall Decorations, Warm White
- 8 Modes settings: Includes an easy-to-understand adjustment of settings: combination, in waves, sequential, slogs, chasing/flash, slow fade, twinkle/flash, and steady on.
- Excellent High Quality: 6.6ft*9.8ft(width*length), 300 WARM WHITE LED lights. UL Certificated Output and wire: 29V Voltage Safe Curtain Lights with UL certified, leads to 29V safe output by UL plug-in transformer.
- Easy to Use: Directly plug in and unplug it for power on and off. US standard outlet, voltage 110V. Leading wire: 9.9 ft.
- Perfect Decoration: WATERPROOF(IP44) Perfect for indoor and outdoor decorations. Christmas, party, Valentine's Day, wedding, home, window, bathroom, festival, Holiday, shows, restaurant, hotel, commercial building, shopping center etc.
- This LED curtain lights will make your life lovely. NOTE: ONLY STRING LIGHTS, NOT COME WITH A CURTAIN, MAINLY USED FOR CURTAIN DECORATION.
Features:
Specs:
Color | *Warm White |
Height | 3.95 Inches |
Length | 8.26 Inches |
Weight | 0.5 Pounds |
Width | 3.14 Inches |
12. ITART Micro LED String Lights Battery Powered 4 Packs Multi Color Mini Fairy Light 20 LED 6Ft Ultra Thin Silver Wire Rope Lights for Christmas Trees Wedding Parties Bedroom
- Multi color fairy starry lights.MINI LED BATTERY POWERED LIGHTS for christmas, weddings, parties, home decor to create any type of mood from festive to elegant to magical. Perfect lighting addition to any DIY craft projec. 360° sparkle for a beautiful effect. Perfect lightings for Mason jar, bell jar, apothecary jar, wine bottles and Easter Wreath Garland decorations.
- WATERPROOF BENDABLE MULTICOLORED STRING LIGHT. Ultra thin, bendable but sturdy wire with LED lights is totally submersible. Heat insulated and moldable silver wires string lights are flexible and easily mold into any shape you like. Do not sbumerge BATTERY BOX!!!
- BATTERY OPERATED STRING LIGHTS. Energy Efficient. Premium 210mAh CR2032 batteries included. Our batteries are tested to last for 20+ hours non-stop operating time, more with breaks. Avoid having to deal with all the nasty extension cords by tracking down a few sets of battery powered string lights.
- Set of 8, 20 super bright LEDs lights on 6.5ft long ultra thin wire with 4 inch distance between LED bulbs and 12 inches clear cable between wire and battery box.
- 12 months warranty and 100% ITART products satisfaction guarantee!
Features:
Specs:
Color | Multicolor (8 Pack) |
Height | 0.91 Inches |
Length | 3.39 Inches |
Weight | 0.15 Pounds |
Width | 2.99 Inches |
Number of items | 8 |
13. Neon Glowing Strobing Electroluminescent Wires (El Wire) - Green, Blue, Red & Pink Party Pack, 3333
- Tons of storage pockets and compartments
- Lower main compartment for cosmetic storage
- Detachable mirror
- Plastic coated bottom with metal feet
- Ventilated zip pocket compartment in back perfect for shoes or soiled clothing
- Pockets: 2 interior slip, 1 interior zip, 10 exterior, 1 ID window;Includes Mirror
Features:
Specs:
Height | 2.362204722 Inches |
Length | 7.086614166 Inches |
Width | 4.330708657 Inches |
Number of items | 4 |
14. Lychee 1M Neon Glowing Strobing Electroluminescent Robbin El Tape Belt, Blue
New model: Super thin, High brightness, cool lightNo heat, Flexible and Water resistance,Length:3ft; Width:1.5cm,Needs 2 AA batteries(not included)Accessory: a controller box(battery adapter) and 1* EL Wire Belt.Brand:Lychee.Warm Notice: All "Lychee"Brand Neon Glowing el wire with Special "Lychee"lo...
Specs:
Color | Blue |
Height | 0.1 Inches |
Length | 36 Inches |
Width | 0.6 Inches |
Size | 3Ft |
15. eTopxizu 16.4ft 5M Waterproof Flexible strip 300leds Color Changing RGB SMD5050 LED Light Strip Kit RGB 5M + 44Key Remote Controller + 12V5A Power Supply
12V Super Bright SMD 5050 than 3528 Single ChipLength: 5M or 16ft. Thickness: 0.1inch. Width: 0.4inch. IP65 WaterproofRGB Color, 12V DC Input Voltage, Cuttable Every 3 LEDsEasy and Flexible installation. Ideal for home and business light decoration300LED Diodes per Reel, Double side adhesive on back...
Specs:
Color | Rgb (Red, Green, Blue) |
Length | 5 Millimeters |
Weight | 0.5 Kilograms |
16. ZITRADES EL Wire Super Bright Portable Kits with AA Battery Inverter for Halloween Christmas Party Decoration, White/Blue/Red/Green/Pink
- Five colors EL wire kits(red, green, blue, white, pink)= 5 x 1 metre of EL Wire + Driver + Splitter.
- Flexible, Energy saving, Less power drain than LEDs. Great for car, parties, camping bar, Burning Man, Halloween, Christmas decoration.
- Powered by 2x AA batteires(not included). EL Wire is Non-Toxic, cold to the touch, so super bright, very durable, and resistant to water and ice.
- Battery controller 4 modes: Continuous ON / Strobe / Blink and OFF. Can easily switch mode by pressing the button and so easy to decorations.
- Having 5 separate strands of EL Wire from one driver makes this versatile and opens up new possibilities for using this amazing glowing string.
Features:
Specs:
Color | Blue,white,green |
Height | 0.393700787 Inches |
Length | 3.93700787 Inches |
Weight | 0.02 Pounds |
Width | 3.149606296 Inches |
17. 4 Pack - TDLTEK Neon Glowing Strobing Electroluminescent Wire/El Wire(Blue, Green, Red, White) + 3 Modes Battery Controllers
Battery Pack Controller - Off/Slow Strobe/Fast Strobe/Steady On ModeRequires 2 "AA" Batteries (not included)9ft 3m Neon Blue Electroluminescent (EL) Wire (2.3mm)Great for Parties, Burning man, halloween, Raves, Costumes & DecorationsWater resistant and weather durable
Specs:
Color | Blue, Red, White and Green |
Height | 2.3 Inches |
Length | 7.7 Inches |
Weight | 0.24 Pounds |
Width | 5.8 Inches |
18. Ikea 501.923.65 Dioder LED Light Strip Set, Multicolor, 4-Piece
You can shift automatically between 7 different colors or select 1 at a timeThe LED light source consumes up to 85% less energy and lasts 20 times longer than incandescent bulbsSuitable for use in confined spaces, such as cabinets, bookshelves and closets, as the LED light source emits low heatLengt...
Specs:
Color | Multicolor |
Height | 2 Inches |
Length | 10 Inches |
Weight | 1 Pounds |
Width | 5 Inches |
Number of items | 1 |
19. econoLED 12V Flexible SMD 5050 RGB LED Strip Lights, LED Tape, Multi-colors, 300 LEDs, Non-waterproof, Light Strips, Color Changing, Pack of 16.4ft/5m Strips US Seller
- ☆ Easy installation:Self-adhesive back tape for secure and easy application for any clean, dry and flat surface. It can be cut every 3 LEDs along the cutting marks, without damaging the rest strips.
- ☆ Wide Application: The package come with strip only,not include Remote Controller and AC adapter.Color changing with 20 static single colors based on RGB and white color, with dimming and brightness controls is ideal for indoor and outdoor lighting decoration, such as kitchen, under cabinet, dining room, bedroom, party, patio, automobile, wedding, etc
- ☆ Save electricity:Low Power Consumption and extremely low heat. The working voltage is 12V, extremely low power, Long life span more than 50,000 hours.Safe to touch, without worry about getting shocked or burnt.It is touchable and safe to children.
- ☆ Cuttable and linkable: Led strip light can be cut between every 3 leds without damaging the rest strips.A power adapter and remote control is required but not included, please search "B01K1GKLLK and B01F3GZEGA" on Amazon if you need.
- ☆ 100% Satisfaction and fast ship: It comes with 12 month warranty, full refund or send replacement, no question asked.The item is shipped form USA.The shipping time may take 3-5 working days.It 's very fast ship!
Features:
Specs:
Color | Multicolor |
Size | 5050 strip lights |
20. Minetom Fairy Lights, 40Ft 120 LED Waterproof Starry Firefly String Lights with USB and Power Adaptor, 8 Lighting Modes for Christmas Party DIY Wedding Bedroom Decorations
- LED String lights composed of Ultra Bright White Warm Color Micro LEDs that don't overheat giving a light fairy effect. After hours of use, they are completely safe to touch without risk of burns. The LED Starry Lights are safe for children over three years and for pets. It's the perfect decoration for girls' and teenagers' rooms. The ambience that they emit is relaxing. Luminosity: 360° sparkle (as opposed to the traditional 90°-180° sparkle.)
- Starry Lights apt for both indoor and outdoor settings. These hanging, twinkle lights or led wire lights are suitable for wedding decorations, and it will satisfy all of the light needs for the event, as its luminosity is enough for the entire room! This saves you money, and leaves your guests awestruck with the trendy decorations at your event or in your home.
- Starry String Lights with 120 LED Bulbs (instead of 100 only). Between each LED there is a space of 2" (5 cm) which is a shorter distance than other strings lights in the market. The large amount of LED lights on the light wire and their rich color bulbs, enhance the brilliance of the copper wire string unit. These decorative novelty lights are suitable for bedrooms, gardens, patios, and parties, as well as decoration for cafes, restaurants, hotels, clubs, casinos and homes throughout the whole year. They light up the room with an atmosphere of romance, and as they glow so brightly, they can be seen during daylight with no problem
- Warm white LED lights strings, along 20 ft of ultra-thin copper wire, (4 mm in diameter) are copper color. The copper wire has a lacquer coating that makes the whole strand of lights water resistant, though is preferable not to soak them in water. The copper wire lights can stay outdoors on a rainy day, provided that the power adapter is protected with a plastic cover. The LED String IP-65 is impervious to dust. These starry lights on copper wire do not break easily, and its extended length in relation to standard mini led string lights facilitates the ease of wrapping around a Christmas tree and lights party. Its flexible lights string wire is easy to shape and adapt to any object or support in any position.
- Meets CE&ROHS certification. Portable, can be used in Europe, plug and all. With a 20,000 hour lifespan, they can stay lighted for as long as needed. Handle with care! Even though the starry star lights are built strongly with top manufacture, they can still be broken by stepping on the LED bulbs or stretching out the copper wire. Comes with complete guarantee! Return if broken, and we will replace it with a completely new string of lights. Avoid connecting the power with wet hands. While the adaptor is working, avoid water drops. Low energy power consumption. The Strings Lights that look like Star lights!
Features:
Specs:
Color | 120 Leds Copper Wire Warm White |
Weight | 0.22 Pounds |
Size | 120 LEDs |
🎓 Reddit experts on indoor string lights
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where indoor string lights are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Just to warn you that providing a lot of your own lighting is NOT cheap and it is more complicated than I realized by far.
Our venue has no lighting whatsoever outside and only a few electrical outlets. It has been a challenge to light up an area outside a city with no other lights nearby for 90 people at night. But its fun and I just wish we had more to spend so it could be better.
We have been going around every weekend buying new lights and trying them out, here is what I have found so far.
Solar options are too dim and very expensive but if you just want light all over and don't mind if its dim, right now Walmart has the small lights on sale for $.97 each. I picked up a ton and so far they work really well for the price. They have really cute ones all on sale right now due to summer being over and you can pick up some interesting shapes and designs if you are ok with spending $5+ a light. Home depot had some too.
Target also has string lights with the big round bulbs with LEDs inside for $12 a strand and they look great strung across between trees or light wrapped poles concreted into a planter. The round cases surrounding the bulbs really light up the ground from 8-10 ft up.
Another idea are the LED balloons, they come in different colors and look amazing.
You can also buy these LED light stands (all over on wedding sites for underneath vases) and then purchase crystals or neat paper weights and set them on top of them. We have several of those in our house on display and they are sooooo pretty, people will love them!
We just bought 12 of these for our tables to wrap around and light up colored vases:
http://www.amazon.com/gp/product/B004DZBYXK/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Tested them this weekend and for the $6.25 they are way exceeding my expectations. Order one and see what you think. They come in all different colors too.
I hope some of that helps, we've had fun doing this all lately! Good luck!
A fun idea for favors too are these really awesome green lasers. We bought a handful from ebay a few years ago and they are crazy bright, you can see the beam way, way up into the sky. They have lasted really well and I have seen them since for sale other places. The purple isnt very bright but still neat, though I recommend the green it really is incredible. Buy one and try it out.
Did a quick run up to the BWCA this Labor day weekend, and ended up with five hammocks and two tents scattered over the campsite. Three generations of tarps on this trip.
Finally got to use my cuben tarp this run. Picked up a 12’ Hammock Gear cuben, shaving off about 12 oz from the SuperFly. Mother nature was kind enough to provide some strong winds and rain, so a more thorough test than I anticipated. They say 6.5oz, but once I added in some cord it was closer to 9. I like the doors, which provided extra coverage when the winds shifted direction. I may need to take a measuring tape to it, as I’m not convinced it is an extra foot longer than the 11’ ridgeline of the SuperFly - going to measure that out before I pack it away. First unfolding was a bit unnerving. The fabric gave a ‘rip’ sound as I pulled it apart. My brother saw the ‘oh shit’ look on my face, but it was just the first time the fabric was unfolded. Nothing damaged. Whew. Staked out the fabric, which did not stretch out when the heavy winds came up. When the rain hit, there was no misting like I’d sometimes get with the SuperFly. The down side, it sounded like I was inside a drum. Very loud, every time the rain hit the tarp. Thank goodness for earbuds.
The SuperFly, as usual, worked great. Treated it with a bit of water repellent, which stopped the misting I encountered last season. I packed in some lights for the ridgeline (http://www.amazon.com/gp/product/B004DZBYXK) which helped ease my daughter through the storm. Glad I tossed it in her pack.
I ended up packing in an old blue poly tarp for the third hammock. Thought it was the 12x10 tarp, but was the 10x10. Ended up angling it diagonally to maximize the coverage. Heavy, loud.. but love the one you are with. The trees worked out at the correct angle, so he managed to stay dry. He did end up adding some drip lines in the middle of the night, however.
New for this trip was also one of those $30 woot specials. I’ve gotten spoiled with the webbing and whoopie slings packed with the warbonnets, and never thought to look to see what it came with. Surprise, nothing! The only bit extra rope was some stretchy cotton, so ended up making a few tension adjustments as the trip progressed. Tried it with my neo-air, which did not work out near as slick as the warbonnets dual layer pouch. The soul pocket was on the outside of the netting, so anything I had inside the hammock ended up under the mattress. Argh. Once settled in, it was reasonably comfortable. Wish I had packed the winter underquilt rather than trying the pad with that one. The mosquito netting had a blemish, so wondering if woot sells the ‘rejects’.
I’d been saving my reflective cord for the new tarp. The only complaint is the reflective bits came off. For tying knots, not great. Visibility and weight, was alright. In the future, will probably pack a bit more to hold out the side.
Lastly, the guy with the XLC opted to not bring in the underquilt or pad. He ended up dressed in every layer of clothing while the rest of us were warm.
I've been cosplaying Voltron since 2016 with the group of Paladins that I also created. Believe it or not this was my first EVA foam build. I went into it with very little experience w/ EVA foam and foam smithing in general. I can knit pick everything wrong with my costumes and how I'd do it differently.
I am currently working on a version 2.0 for my Voltron and all the Paladins. I'll be doing many things differently, but i will likely take things I hated about my costumes and change them as well as take inspiration from Dan Morash's Paladin armor. IMO, his is the closest to blending both screen accuracy and functionality.
With that said, my advice on the armor parts from head to toe. This info is all the things I will be doing for my version 2.0
Additionally: Here is a post I did for people wanting to get into foam smithing. I highly recommend getting your foam from TNT Cosplay supply. For the Floor Mat EVA, you can easily get them at most hardware stores.
I got mine on amazon for 6 bucks. Didn't expect much but have been my go to precision bit set for a year. I'll find you a link.
Edit.
This is the one I bought. There is a 45 piece available for 11 as well. Bits are great. Strong, but should still give before breaking a screw in something. Are magnetic too, great for small screws. Screwdriver and extender are solid, but the money obviously went into the bits and that's ok. Come with really cheap tweezers too. Love the case though. Can easily mount on and screw on your wall. Also the party trick, the bits pop outward for easy access when you open the lid.
I got them to fix my istick 100w that I broke. Worked great, have used many times. Still, be careful what you do. Companies are very quick to void a warranty if they find out you opened it up.
Okay. Essentially, you're gonna want to make a template the size of however big you want the font to be (keep in mind the size of the plywood). Why? You're gonna want to draft out each entry and exit of the wire. Newsprint should do lovely.
Next up: Plywood. Mine's about 34×14.5". It's really up to y'all smokin' sexy stylish demons how big you want yours cut. Once you cut it, paint it. Two coats.
Once again, trace out the letters onto the plywood once the paint's fully dried, this will help as you start laying down the wire with super glue since this is a very curvy sign (I do recommend using a small brush over the traced lines). Mark the entries and exits again onto the plywood and drill holes the same width as the wire, roughly around 2mm.
I hope you didn't have much plans for the rest of the day, so get comfy. Now comes the threading and glueing of the wire. Thread the wire through the first hole and pull all the way through (tape the battery pack to the back of the board to make it easier to continue). Onto the fun part, brush a dash of super glue onto the traced path of the wire (not too thin or thick) and hold the wire in place until it sets, repeat this all along the traced curve until you hit an exit. Pull the wire through and thread into the next entry, making sure it's free of any knots, and repeat.
EDIT: This video by TheSorryGirls should pretty much help you get the gist of how I came to make my sign, especially the marking of the wire entries and exits.
https://youtu.be/hQxQKmfjXLg
EL Wire: https://www.amazon.com/gp/product/B00EE240RY/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1944687542&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B003J99JW4&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0W09V0VT91R6MM1H7CH5&th=1&psc=1
Hey bro. I also yoyo at EDM shows and have been doing so for about 3 years. I also spin poi and double staff. I go with the beat and people really like watching me. I've tried everything, from LED kits to glowstick kits. I've looked for fiber optic string, and unfortunately, there isn't really anything you can use for string at this time, except for blacklight string which looks awesome in a blacklight venue. I've even been asked to perform on stage a few times. I've been on the search for a perfect dark club yoyo for years.
Honestly, I got a little excited when I saw your post haha.
So yeah, I've tried it all, and here is the best setup I've found so far:
Dark Magic 2 Yellow Neon Color (I'm actually going to get the special edition clear white one soon and try that, but I have 3x DM2 yellow neons.)
+
Shinwoo LED kit
+
Blacklight string
+
Cheap LED fingerlights from Amazon
Learn 5A counterweight yoyo, and use cheap LED fingerlights from amazon. They are lighter than the dice people normally use, but you will get used to them. The LED counterweights add a new dimension, and blow peoples minds. Plus the fingerlights are very cheap and replaceable, and they use the same batteries as the shinwoo light kit. So out of a 40-pack of LED lights from amazon, ytou will have many that are defective and you can crack them open and save the batteries for your shinwoo light kit.
I know you are probably more focused on making the string stand out, but unfortunately, I hate to say this, but to the average observer, all string tricks look the same and they can't tell the difference. You will get much more positive feedback in a crowd learning 5A and using an LED counterweight. One thing I especially enjoy doing is yoyoing for a brief time normally, and then all of a sudden turning on my counterweight LED and doing 5A moves. I love the reaction people have never seen anything like it before.
I am still searching for different throws that fit the shinwoo light kit, but it is made perfectly for the dark magic 2. I use 3 dabs of hot glue to keep it on there, and no sidecaps. I get all my stuff from www.yoyoexpert.com. Buy several shinwoo light kits because they are only 5.00 for a pair and kinda disposable. You will lose one.
Here's a pic of my setup.
This might sound crazy, but I actually bought a portable battery powered wearable black light to have to make my string show up better, but that's just trying too hard and I don't bring it anywhere. I've been on this journey for awhile.
Idk how much room is in your kit but head massagers are pretty great. This is 2 of them for $5.
http://www.amazon.com/Hand-Held-Scalp-Head-Massager/dp/B003NTELC8/ref=sr_1_2?ie=UTF8&qid=1346343347&sr=8-2&keywords=head+massager
Fireworks glasses are incredible. It's just a special lens and these glasses are just decent plastic ones. They make them on paper frames like 3D glasses too and they're pretty cheap in bulk if you want to hand them out.
http://www.prizm-eyez.com/products/onyx-black
Fingerlights are cool but I don't like how they die so quickly. 40 for like $12
http://www.amazon.com/LED-Finger-Lights-40-pcs/dp/B0045H0L1W/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1346343609&sr=1-1&keywords=LED+Finger+Lights+%2840+pcs%29
Fun! Here's some lighting that I've fallen in love with in our home, maybe you'd like them to?
warm LED light curtain we have these up in our bedroom for some cozy lighting.
3D printed moon lamp have a version of this, gifted from Amazon but can't find the exact listing.
cafe lights these hang in our basement and are really nice in our tent when we set it up in the yard. NOTE: these are glass bulbs, you can find other sets w/o (but this one is the one we have and I like).
Enjoy your new space! Thank you for the entertaining distraction, I hope these might brighten up your world a little.
​
Yes, they're very much plug and play. One end of the 16' strip has a female DC jack that you plug right in to a male power supply. I opted to add a dimmer switch that just plugs in between the two. The other end of the strip has two bare wires (positive and negative) which is used to connect another set of strips. Connecting the sets will take some soldering. But if you're only sticking with 16' or less, you're golden. You can simply cut the strip at the inidicated point (I believe every 5 LEDs).
The whole strip is backed with 3M adhesive tape for easy application to whatever surface you're mounting it to.
I opted for white, because I didn't want a disco in my bedroom. :)
However, I like the LEDs so much that I'm thinking of getting a few RGB sets and just using them as Christmas lights when the time comes. I haven't done the math, but I figure @ $17 per 16 feet, it should be pretty comparable to purchasing Christmas lights in the off-season. On top of that, they're pretty damn discreet when they're not lit. You can leave them hanging all year round and not cause eye sore of left over Christmas lights.
Here's the non-waterproof set;
http://www.amazon.com/Non-Waterproof-5050-SMD-Strip-Light/dp/B006LW2NJM/ref=sr_1_1?s=hi&ie=UTF8&qid=1370894027&sr=1-1&keywords=RGB+led+strip
The transformer for the linked set is a bit different than the one I used, but I don't think it's any more complicated. Additionally, it looks like there's a special adapter for connecting multiple sets -- which makes it easier than soldering.
Sure!
Basic backstory with moderately more details- I wasn't partaking and knew I'd be partying 4 days in a row, so wanted something to lean on for the last day. I could have made a simple totem... but fuck that, I wanted that dual saber effect.
Polycarbonate tubing- bloody expensive but the core piece for it. I also ran a wooden dowel down the center of one of the lengths because I had it sitting around.
http://www.tapplastics.com/product/plastics/plastic_rods_tubes_shapes/polycarbonate_tubes/276
El wire - I had two kits running on one of them and three on the other. In retrospect, I'd rather get a more powerful inverter and just run more batteries in to it- kind of a pain to deal with three exterior pieces.
I think I used this kit... not sure, never know with how much stuff gets posted nowadays.
Other than that, I had a 3/4 inch PVC pipe length about a foot long and a T that was 3/4 by 3/4 with the split off as 1/2 inch. (I know what you're thinking- how's 3/4 inch PVC work? PVC's standard measurement looks at the ID, or inside diameter- while polycarbonate tubing's standard measurement looks at the OD, or outer diameter. I found 1 inch polycarb + some tape around it was able to fit in a 3/4 inch T shaped PVC fitting. Illogical... but I promise, it works.) Tee joint is like this. Then I wrapped the 3/4 inch PVC handle in baseball bat grip tape and called it a day- basically anything to make it comfortable to hold on to.
After that, I ran the wire down the interior of the polycarb and ran the power packs for the el wire out the 1/2inch split off of the PVC T piece. Super glue, screw both pipes in to the tee so that they won't fall off (now I know... screwed that up @EDC, was very frustrating to suddenly feel the piece fall off the handle if you lifted it wrong and have batteries go flying in every direction as it smashed into the ground) and it's lit fam!
To top it off: what's the point in having a walking stick, if you're going to mess it up every time it touches the ground? Fortunately, there's an answer for that! I put some of the rubber feet that you can attach to a cane on the bottoms. Not sure if that was 3/4 inch or 1 inch size, this is just a random link so you get the picture.
Difficulty... none. Hardest part was figuring out which sized pieces to use and finding polycarbonate tubing, could have ordered it online but it was a 20-30 minute detour from my commute so just did that instead. As far as figuring out which pieces to use... I instinctively bought more 1 inch PVC pieces than I'd care to admit. Fortunately it's good for setting up sprinkler systems.
End result? I felt like a shaman bouncing around on my staff by Gouryella, and was able to rally for the rest of Dreamstate after the wonderful set full of uplift.
I also stacked both totems on top of each other and recorded Prydz... haven't bothered to stitch all that footage together yet though. Maybe this weekend- it's cool to see what the crowd looked like from above.
CPU | Intel Core i5-4690K 3.5GHz Quad-Core Processor | $219.99 @ SuperBiiz
Motherboard | Gigabyte GA-Z97X-SLI ATX LGA1150 Motherboard | $126.98 @ Newegg
Memory | Kingston Fury Black Series 8GB (1 x 8GB) DDR3-1866 Memory | $63.99 @ Amazon
Storage | Crucial MX100 128GB 2.5" Solid State Drive | $62.99 @ Amazon
Storage | Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive | $49.99 @ SuperBiiz
Video Card | EVGA GeForce GTX 970 4GB FTW ACX 2.0 Video Card | $378.99 @ SuperBiiz
Case | NZXT Phantom 410 (Gunmetal/Black) ATX Mid Tower Case | $89.99 @ Newegg
Power Supply | EVGA SuperNOVA NEX 650W 80+ Gold Certified Fully-Modular ATX Power Supply | $76.99 @ SuperBiiz
Operating System | Microsoft Windows 8.1 - 64-bit (OEM) (64-bit) | $92.00 @ B&H
| | Total
| Prices include shipping, taxes, and discounts when available | $1144.91
| Generated by PCPartPicker 2015-01-13 00:10 EST-0500 |
Last year we brought this Zinka sunblock and it was a lot of fun... everyone wants to stay protected from the sun and have fun! They don't seem to have any available for prime, but it's worth it.
or you could go for a nighttime fun thing and get some El wire... totally portable and has different flash settings. Just bring extra batteries! They are fun to watch/wear and make you stand out at night with your group so you can find each other better. Just wrap the wire around yourself, your hat, you bag.. whatever and turn it on!
I have powered them off a 8 AA battery holder like this: http://smile.amazon.com/Bigstone-Cells-Battery-Holder-Black/dp/B00ESQ8YYG/ref=sr_1_2?s=home-garden&ie=UTF8&qid=1405448843&sr=1-2&keywords=8+aa+battery+holder
They lasted for over two days, definitely got dimmer over time, but they were reasonably bright for a long time
These also work very well and are super bright: http://smile.amazon.com/Operated-RTGS-Products-Satisfaction-Guarantee/dp/B004DZBYXK/ref=sr_1_1?s=home-garden&ie=UTF8&qid=1405448896&sr=1-1&keywords=led+lights+battery
So I originally bought this and this but the long strip when connected to the receiver only displayed blue. (The two small strips that came with it worked fine). So I bought this and used the power cable from the other receiver and it worked pretty well. Whenever I turn it on, it always goes to a random color, even though I just prefer green. I am sure there is a better set up out there, but this works for me.
I have also heard the Ikea Dioder is very popular, but I do not have any experience with it.
These things are pretty fun. They can go in water, too. I use them for trails and just lighting scenes: Shitty Example 1
Doesn't apply to everyone, but LED drumsticks are pretty fun: Example 2
I have some awesome trails photos but apparently haven't uploaded yet.
This would be easy to use,runs on batteries & is fairly cheap. Tuck some inside the lantern & then get a second set to go inside some plastic tubing from home depot. J-j-j-janna if I win I would like a gift card please I am trying to buy a baby swing for my son. Good luck with your costume.
Unless you're using especially bright EL wire (which I'm not sure exists) you might want to rethink your plan. I used this and it didn't work too well. It wasn't very flexible and was pretty thick so you couldn't string it through a standard pony bead more than once. It also didn't show through too well, even with clear beads. And then there's the cheapness of my particular EL wire. I just strung a lot of beads along the whole thing and wore it like a necklace. It was broken after about an hour. A pretty easy fix with a soldering iron, but a concern nonetheless.
That being said, if you can find the right light, I would love to see you succeed.
As far as I know, you'll need some kind of module to control the strip. Something like a Hue+ kit is ideal, but you can get something like this for cheaper at the cost of working well. Depending on your motherboard, you may even have built in compatibility through something like Asus Aura.
As for, /r/desktops, this is just a place to show what your Windows home screen looks like. I'd maybe try /r/buildapchelp or maybe even just /r/buildapc for this kinda stuff :)
So, here is what I did. First time burner. I ordered a bunch of EL Wire off of Amazon for cheap (exact pack I got: http://www.amazon.com/Neon-Glowing-Strobing-Electroluminescent-Wires/dp/B003J9BD50/ref=sr_1_4?ie=UTF8&qid=1312231941&sr=8-4), and then went through the womens sections in a bunch of different stores. Why Women's? Because, for some reason, their clothes are more fun. At Old Navy I got an XXL Womens Turtleneck and a damaged v-neckish jacket thing. I turned the Jacket into a vest. I got 3/4 of a yard of Fur from Jo Anns, took some old pants, turned them into fur pants with fabric glue (It's really easy, honestly. Cut some fur off the yard, put glue on it, put on pants). And then, I went to Goodwill and got some more womens clothing... A long Zebra jacket that I'm gonna put EL Wire on, a small fur vest, and some white beach pants.
My outfits, basically, are -
All White fur Pants + Turtle neck + Fur Vest = Nighttime Party time
Zebra Print Jacket + Fur Pants = Zesty Night Funtastic Bombastic
Jacket-turned Vest + Sleeves from it on legs = Halfnaked Daytime Fun
Beach Pants + Jacket turned Vest = Slammin Not-naked daytime Adventuretime
I just made up those names on the spot... but you get the picture. It's pretty easy. I put the leftover fur on my bike, and on my goggles, and I still have some left. I think I'll just put it randomly on some clothes. I use the EL Wire + safety pins to highlight my clothes.
Double edit: Ask your female friends if you can raid their closets for burning man gear. Chances are, if your friends are awesome, they'll get totally excited and give you a bunch of ridiculous shit. Also, they'll probably want to get drunk and dress you up in stupid shit. It's win-win. Get out of your comfort zone! I did. It's my first burn, FUCK IT!
here is what i used:https://www.amazon.com/dp/B00XJKOCBG/ref=cm_sw_r_cp_ep_dp_5s0HAbREM7Z6Y the lights make sure its set to cool white if you are buying your selfnow the cable for the top most light is a bit short so u can always cut and solder a bit from the bottom light to the top one if you don't want the mess that i havealthough i did try to make it as neatly as possible.for securing the wires i just used clear 4inch zip ties and tucked them behind the frame inside.https://www.amazon.com/Belkin-8-Outlet-Conserve-Protector-F7C01008q/dp/B003P2UMNK/ref=sr_1_sc_1?s=electronics&ie=UTF8&qid=1540851234&sr=1-1-spell&keywords=remote+controll+surge+protector got this surge protector it comes with 6 outlets which are controlled by a remote so you can turn on all the cases with 1 button
https://www.amazon.com/Gorilla-Tough-Double-Mounting-Inches/dp/B00OXVG9FW to secure the lights i used this double sided tape
and a bit of weather seal to keep the dust out on all 4 sides u can pick some up at home depot or fleet farm just make sure its 5/16th size
will be posting a big figure unboxing a bit later and how they all look inside the case.
​
Edit: https://www.ikea.com/us/en/catalog/products/40275846/ forgot to link the bottom shelf so here it is pretty sturdy for the price
HAPPY BIRTHDAY, friend of midnighteskye!! Here are some gift ideas that fit your criteria:
Dark Chocolate Red Rose made with Chocolate Liquor
LED Finger Lights
Set of 10 Animal Finger Puppets or Set of 6 People Finger Puppets (both together cost only slightly more than $5)
12c Syringe-shaped Pens
Rear View Spy Glasses
Pad of Fake Parking Tickets
I'm not submitting these as part of the contest, but in case you're willing to get him a) add-ons or b) things slightly over $5, look at these:
Dark Chocolate Edible Shot Glasses - $7.94, Add-on
Dark Chocolate Liqueur Filled Bottles - $15.95
Google Eyes Drink Markers - $5.69
And if I by chance win, I would very much like this decal for my car (off my "Miscellany" wishlist). It's terribly appropriate for my bitty Scion xA!
Thanks for the contest!
yup it's just vinyl, it came from etsy. SUPER easy to apply and work the air bubbles out. dude that storm trooper vinyl with the h440 white would look sick for real. fyi the led system is in the link below. the white light setting and red setting are super bright and would be awesome with the storm trooper theme.
http://www.amazon.com/gp/product/B00H34FPZG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Oh shit i got this.
blue EL wire, as has been suggested - you can put a roll of this inside the main crystal and route it through the shaft of the staff.
blue LEDs and resistors - individual lights
people have already posted the LED tubes for the bottom of the luminary/top of staff
or the most powerful thing I could find - with variable speeds, so I assume "still" is one - and would be AWESOME - the reviews are really good and it mounts with a very powerful magnet. battery powered.
J-J-J-Janna bound!
blue clear vinyl - this is what Id use for the crystals on the staff. very easy to work with, lightweight, pliable. Id mount layers of it together to make it rigid.
For the gems on her belt, you might want to check out using some resin casting if you cant find pre-made items! Its simple and almost idiot proof.
Id go a light weight PVC pipe for the staff and parts, in case you need to run LED wires through the main shaft, and with sculpey or model magic for the upper parts of the luminary on the top of the shaft - using a lightweight plate as a flat base to mount your LED or EL lights to. You could also use a large plastic bowl, cut to size/shape. Cover with modpodge or a water/glue mixture, then spraypaint with the Krylon hammered metal metallic paint in the appropriate color.
DIAGRAM Im more than happy to walk you through fabrication if you need or want help.
LED tutorial
discussion on using LEDs
Glitter is very difficult, because it is meant to be experienced in motion. A glittered surface sparkles as light moves across it in angles, so a video clip or .gif is hard to beat. Of course that's not always possible, so we do what we can with what we have.
To be honest, you may never get exactly the look you're imagining even with a manual camera with adjustable shutter speeds and Fstops. You can improve your chances with a bit of lighting adjustments though, and if someone is incorporating glitter into their look as often as you do, it might be worth it to give it a shot!
From a practical perspective, every sparkle of glitter you see is because it is directly reflecting a source of light into the lens of your camera. Since you can't manually adjust each fleck to point in the direction you want (if you could do that you would be on a ridiculous new level of MUA skill) your option is to have more sources of light. Subtle diffused lighting won't work, so a more direct approach is necessary. I have heard of people using multiple LEDs like these around their makeup mirror or their face, directly out of the frame. This provides multiple points of direct light that will increase your chances of picking up multiple flecks. Turn your ambient light down in the room, and experiment with what you get!
Bonus: Haven't you heard about how dangerous capes are? Do you want me to get sucked into a jet engine? I prefer to show my super hero side as glow in the dark man (keep that quiet ok, its a secret) with some of the electric neon wire.
[hydrangeas] (http://i.imgur.com/tlWB989.jpg)
These are by far my favorite. Everytime I go to cape cod I drool over all of them. They grow perfectly there and in such vibrant and beautiful colors!
[awesome light] (http://www.amazon.com/dp/B0041HC3IU/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2JWEMKCIR7MH0&coliid=IHVWMOUIAJSJ0)
Whats the benefit of 5050 over 3528 (it seems like the difference is the coloring?)?
I figured it might be good to get a strip with a bunch of color variations to get more of the spectrum etc. Is the warm white more desirable? I was reading elsewhere that green or blue light was good for veg. link
I'm not really entering your contest or anything, but from looking at your wishlists, you seem like you need this in your life. :D
Also probably this.
BTW, JTHM is the shiz. Glad to see someone else still likes those comics!
Also, just for shits and giggles, here's something that's under $5 Because everyone could use some neat lights in their life.
For your bike, you want one of these to illuminate the ground around you and make you visible from afar, and one of these to illuminate the frame and make your specific dimensions visible from up close.
For your body and backpack you want a few of these to light you up ad hoc.
The links I provided are all items I have bought several times on Amazon USA and used and successfully re-used on playa. They are the best combination of price, quality, and durability. They all run on AA batteries.
Have fun!
I've done a leotard-esque suit and sewed EL wire onto it. Just gotta have somewhere to attach the battery pack. I bought Sam's disc from ToysRUs (it has a switch where it will light up every few seconds and with the press of a button lights up more and makes noise) and just held on to it/wore it around my arm when I was in costume.
I think for Flynn's coat you would want to go with EL tape for the sake of being true to film. You could probably tape or glue the back of it to the inside of a hooded cloak. I've not used the tape, but the EL wire works fantastically, I've worn the suit twice in two years to long parties and have yet to replace the batteries. The wires don't get hot and can take a lot of strain too! Best of luck to you.
well that depends, is a single smaller strip that is actually good quality acceptable? if so get this i have it and the adhesive is actually usable, which is a miracle, as 99% of the other cheap strip have literal garbage instead of adhesive. they are bright, and the white on them is actually a much more white light than most others
I'd like to say she was but honestly it was at least 5 years ago and I couldn't even tell you which party it was or what she looked like though I'll never forget the experience!
These were the lights
I wore these for my Carnaval costume this year, they were great. They operate on a coin battery, so the switch is small and easy to hide, they were super bright and they lasted all night. They come in tons of colors too and they're relatively cheap.
Fortissimo
I think These LED Gloves are really cool and a great value at like half your budget. If you also bought 10 feet of Electro-Luminescent wire you'd still be under budget but ready for any party that might come up...
Cozy set up! We also have a Kingdom 6 and love it. The garage is especially nice for rain beers.
Also, if your wife is anything like me, get her a few of these sweet battery operated string lights to hang up in the tent.
Here's a quick parts list:
Hydration Bag(galaxy pattern sold out)
EL panel
LED strip
LED controller
EL wires
Power Bank Battery
​
I took the EL panel and applied a vinyl sticker I custom cut on a Cricut machine, then hot glued the panel to the bag. The EL wires on the bag were attached using fishing string, sewn on every few inches. Same with the LEDs, every few inches I attached them to the arm straps using fishing string and a needle. Not much else to explain, so any more questions feel free to comment or DM me. Thanks for all the love, I'm so excited for next month and if you find me at EDC come up for a hug or a picture or both or neither!
Using:
https://smile.amazon.com/gp/product/B01JZ2SI6Q/
https://smile.amazon.com/gp/product/B006LW2NJM/
https://smile.amazon.com/gp/product/B008FKDK2M/
With great success. Have them around the TV in my den. They work great with Home Assistant.
I used econoLED 12V Flexible SMD 5050 RGB with my strix board. I’d recommend some double sided tape as the adhesive isn’t the best on these. Lights are great though.
Well, it seems as if your 400 gifts goal could be a win win! I REALLY want this and it's only 40 cents! :D
More about lights- you need to have lights on yourself and your bike, enough on all sides so you are clearly visible from every angle (a headlamp does no good if someone is coming up on you from behind). The good news is that the price of led strands is low enough that you can easily buy a bunch on Amazon for fairly cheap. Here is a link to strands I've used in the past:
https://www.amazon.com/dp/B06Y122V89/
These are lightweight, can easily be applied to any outfit with safety pins, and can be attached to a bike frame and wheels using electrical tape. (No need to remove them when you're away from your bike, I've never heard of anyone taking the time to peel off electrical tape to steal these lights). They run on standard watch batteries, so bring some spares and you should be good to go.
Congratulations to you as well! 🤗
You sure can! Here are the twinkle light curtains and here are the battery LED lights
I have These.
The kit for this deal are much much better.
I was able to run my 3000mhz stick at 2933mhz with DOCP settings, and the G.Skill RGB memory I bought was NOT on the QVL list.
This deal's RAM are Samsung B-Die and faster and will likely hit 3200 and not be off like my sticks.
In regards to RGB control, I'd assume Aura-Sync will work as well on these 3200mhz sticks as it does with my 3000mhz sticks.
Good luck...it's a great board...also, if your looking to use those RGB pins, a generic RGB 5050 strip will work just fine, no need to spend extra $$$ on CableMod lights. Just make sure you cut them to less than 2meters of length.
Typically for a costume like this I start at a thrift store, and find one or two pieces that I can build the rest of the costume on. I've found that if you have one (or two) focus pieces (cool helmet/hat, bandolier, etc.) that are really interesting and detailed, the rest can be more normal, especially in situations where people won't be poring over every detail in the costume.
If you want something in front of your face/eyes, and happen to have a store near you that sells plastic sheet (TAP plastics, for example, although you can get clear lexan from Home Depot/Lowes) and these can be bent fairly easily by heating and pressing around a form (for a curved face shield/glasses I would use a paint can or similar).
Other good source would be the movie "Blade Runner" and the concept art that goes with it.
I would imagine that the "elite" of dystopian society are under threat of assassination, so it might be worth looking at costume protective clothing (like the first pic in your diagram) and at portraits of Renaissance elites, like the Medici, who wore armored clothing.
If you want Tron-style lights, EL wire kits can be had: Amazon
It runs cool, and can be glued/sewn on to jackets or whatever.
The last tip I have would be when in doubt, silver paint + layers of clothing. It'll make you more visible at night as well!
Well you might’ve just convinced me to do that!
Any recommendations on a good set for a good price? I really only need 12 ft.Edit: I've just placed an order for these https://smile.amazon.com/econoLED-Flexible-Multi-colors-Non-waterproof-Changing/dp/B006LW2NJM/ref=sr_1_3?ie=UTF8&qid=1518055804&sr=8-3&keywords=led+strip+lights+rgb
Those are 3528 LEDs, a strip of 5050 RGB like this will perform much better. For 5050, each chip has 3 LEDs, one of each color. The 3528 has a seperate color for each chip. This means the 5050 is ~3 times as bright and will offer better whites as the colors are less spread out.
Thanks! I was experimenting with these. They add a nice glow and are great for reflections in glasses.
i have some of these lying around http://www.amazon.com/LED-Finger-Lights-40-pcs/dp/B0045H0L1W/ref=sr_1_1?ie=UTF8&qid=1374815782&sr=8-1&keywords=led+finger+lights
was thinking of creating some sort of led mod with them basically same thing as your vid except they use 2 smaller but taller batteries as a power source... thoughts? possible? or would it be easier to create a series circuit and go 4AA battery packs like ive seen? was thinking of using my zaku 1/100 mg as a tester
Nothing to code, most work the same way. https://smile.amazon.com/econoLED-Flexible-Multi-colors-Non-waterproof-Changing/dp/B006LW2NJM?sa-no-redirect=1
Something like this I am fairly certain will work 505 addressable are pretty common in devices now adays.
You will need the 4 pin connector like this, https://smile.amazon.com/EvZ-10PCS-Connector-Conductor-Jumper/dp/B01CMLLKHG/ref=sr_1_9?ie=UTF8&qid=1496367228&sr=8-9&keywords=RGB+connectors&sa-no-redirect=1.
Or if you search 5050 12v addressable LEDs im sure you can find cheap options on ebay or amazon.
Edit: /u/HeyItsBlu I see you found some on a comment below. Remember you can always cut them to size too. Just cut across the contacts that connect multiple strips together to get the total size you want.
Might I suggest mounting your strip lighting to EVA and then potting your leads with a high strength epoxy or hot glue. We're getting pretty good results affixing our lights to a flexible but more rigid than fabric surface - kind of like an armored suit.
https://farm6.staticflickr.com/5607/14967764174_23bc60278f_b.jpg
I'm a big fan of neopixels! I got a chance to use em in a project earlier in the season and they are a lot of fun. Pricey though. For this halloween suit we went for quantity over quality. 1500 leds but all "dumb lights".
http://www.amazon.com/gp/product/B006LW2NJM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Electroluminescent Wire. It is really awesome stuff and makes that cool foggy, glowing effect (Like this) And this is what it looks like lit up in real life.
thanks for the reply. I purchased [this kit] (http://www.amazon.com/gp/product/B00BJHGUCU/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1) which looks to be the foundation of the costume. I also watched a few youtube videos such as [this one] (https://www.youtube.com/watch?v=U_b08YRcY4s) that look to do what you did (I saw you comment on some of the guy's other vids). Assuming you do it this way, what kind of wire are you using to connect the cut pieces?
I'll probably make a run to Radio Shack or something similar and get the solder part# 64-025 (already have a gun) and battery pack to power it. Any suggestion or tips on the battery pack?. After that, I think I'm all set on parts and need to build.
On the GMA segment, I told my wife you were coming up and seeing it might give me a better idea how to build it. Afterwards I told my wife you were only on for 15 seconds and bet you were wondering why you went. She said, "for the free trip to NY of course." I imagine she's right.
Also, why haven't you put paid ads on your youtube video? You could be making money on those views.
Check these out. The battery pack is super thin.
I slipped the battery pack into the cuff and strung the lights through in a zigzag pattern. Don’t wrap it around in a circle because the cuff won’t stretch as much due to the copper wire and will be super tight. The zigzag gives it a little wiggle room.
It's all good. It's called el wire
this is where I bought mine
http://www.amazon.com/gp/product/B003J9BD50/ref=cm_sw_r_fa_dp4_IBAwnb0HBQ42N
Have fun on your your outing! It would be cool to see the results.
Okay, LED strips are cheap and if you get the right ones with someone that knows how to wire it all together (you could do this your self actually with a little patience) you can get awesome displays pretty much anywhere.
Black lights are always awesome IMO, but you have to get the right things that react with the lights to take it up a notch. Tonic water with quinine glows in black light, so maybe incorporate that into drinks somehow.
Wall art is always shitty as all hell at clubs. It's not that damn hard to find an semidecent abstract artist and tell him to make some trippy shit for your club. I'll leave a link to my portfolio here so you can get an idea.
El Wire is cheap as well and you could decorate the fuck out of your club with it or something.
I really think lighted dance floors should always make a comeback like they had in discos in the 70's, but you could do even better with LEDs now.
Infinity mirror tables, wall decorations, floors, ceilings, whatever. Infinity mirrors are awesome.
Community sticker board so people can bring in stickers for whatever B)
Have a place where people can chill out and talk, answer calls whatever it is they need to do in a room that's not the bathroom.
Condom vending machine, hello.
Comfy seats, but nothing too fancy you won't have a problem cleaning.
Choo-choo train bottle service ayooooo! This might not be the best idea, honestly. But it'd be cool!
Lastly, this is a stretch, BUT I think it'd be a good idea. Some way to sort the couples from the singles and people that aren't looking for anything. Glowstick wrist bands? IDK.
https://www.amazon.com/Blue-Neon-Glowing-Strobing-Electroluminescent/dp/B003J99JW4
EL wire is exactly what you need. It's cheap and comes in a number of colors and is battery powered.
If you wear a camel back string it through there. (That's what I do) but hats or shirts are also popular. It's very bendy so you can make it for what ever works for you.
Hope this helps.
I'm currently using an LED strip for similar purposes (link below). The wiring' a little tricky to get hidden, but I like the control for color-changing. I'm sure there are more basic options out there as well
http://www.amazon.com/Ikea-501-923-65-Dioder-Multicolor-4-Piece/dp/B00R8H98V0
I think it's more cost effective to go with a Ryzen 5 1600 + B350 motherboard. It'll have no problems with 1080p / 60 FPS and has a longer potential upgrade path. You can take the $100 saved and put it toward 2x8GB DDR4-2800+ RAM or change out your single stick for 2x4GB sticks of RAM and pocket the difference.
Personally, I wouldn't really bother spending that much money on RGB fans for the case. I'd rather get a roll of 5050 LED strips on Amazon and plug it into the motherboard. I got several meters for under $10 and a pack of solderless connecters for under $10 and was able to light up my case and my wifes case with lots left over. Just make sure you get a board with a couple RGB headers, and you'd be good to go.
EDIT:
I used 9' lengths for the wheels. The battery pack for the 9' lengths is only 2 AAs. When I zip tied the on, I tried to get the battery back as close to the hub as possible, so it wouldn't offset the rolling weight of my tires.
This is the exact wire I used. In the end, I used 2 15' lengths, and 3 9's lengths. The reviews are pretty accurate. I honestly didn't notice the humming once I was actually moving and on the road. No one who rode near me could hear it. I pointed it out once and everyone said they hadn't even noticed it.
For those pining for these (myself included!) you can make them yourself using a technique like the one they show here. The girls use T90 wire but honestly you could probably get away with coat hangers or any 14+ gauge electrical wire.
I'll try to make some and see how it goes. After I go to Target ;)
edit: found this on amazon. Seems much more economic
It's a generic EL wire, something like this except its plugged into a wemo outlet instead of being battery powered. You can kind of position however you like so I thought a wavelength pattern might be neat.
Does each section of the strip have to change color individually? Or can the whole strip change together?
If yes to the first question, follow what /u/UrFavSoundTech says.
Otherwise, for a much cheaper solution, you can buy plain 4 pin RGB strips ($10/16 ft), and a RGB DMX dimmer ($20). You can cut the strips up; there is a cut point every ~3 inches.
Make sure you get a good 12V power supply. This is a long strip. You'll need at least 15A. If it gets dimmer towards one end you can bring power cables to the other end.
the cost is 16 dollars for the dynamo, 13 dollars for 10 feet of elwire with an inverter already attached and about 10 dollars in parts from radio shack for the voltage regulation.
for the most ease you can simply buy this http://www.amazon.com/Portable-Wire-Feet-Long-Blue/dp/B0041H2X7Q/ref=sr_1_1?ie=UTF8&qid=1300890336&sr=8-1
slap it on and you are done.
for the dynamo powered one gets a bit more complicated and needs a little hobbyist juice. but i would be happy to explain to anyone who wants to know how.
It's a set but I've got one of these and I love it. It has all of the bits you would ever need.
Other than that, I've found these:
I took a time time exposure using EL wire (which is like $8 on amazon) And then i extracted it copying just the blue channel and it worked pretty well.
http://www.amazon.com/Lycheers-Blue-Glowing-Strobing-Electroluminescent/dp/B00EE240RY/ref=sr_1_5?ie=UTF8&qid=1398482545&sr=8-5&keywords=EL+wire
Nicely done. If you're going to play around with stuff like that more I'd look into getting some of these instead of using christmas lights https://www.amazon.com/Starry-String-Lights-Flexible-Copper/dp/B00I7M7C40/ref=sr_1_8?ie=UTF8&qid=1517454079&sr=8-8&keywords=led+light+wire
the copper wire in between the lights is so thin that they are way less noticeable (sometimes not noticeable at all depending on your aperature)
I bought them in a hardware store, they were pretty similar to these. 4 solid strips, not very long but mine are pretty steady.
Oh okay -- so these are the other lights I get which do plug in straight to the wall.
So that should get rid of the transformer problem, right? How would I hook it up then?
(Also, thanks for your reply, that was really helpful. I didn't realize the voltage issue.)
Yeah. Is this a good strip? It's the best and cheapest one I could find that doesn't need a motherboard with an RGB header. https://www.amazon.com/Logisys-LDXRM12C-Adhesive-Flexible-Extendible/dp/B00H34FPZG
I ordered them off of Amazon, it was: https://www.amazon.com/gp/product/B00XJKOCBG/
Tbh, I might try and return these, the cables are a bit too short for to reach the floor from the top of the detolf. If the cables were about 5-7 inches longer, these would be perfect for a detolf.
Sweet, thanks. Do you think you really need the bike glow ones or would this http://www.amazon.com/Blue-Neon-Glowing-Strobing-Electroluminescent/dp/B003J99JW4/ref=sr_1_1?ie=UTF8&qid=1324243434&sr=8-1 do the job?
Yep! Amazon :) https://www.amazon.com/gp/product/B00BUIPGK0/ref=s9_acsd_al_bw_c_x_5_w
This was only possible thanks to /u/Rockran.
Link to his post
His post had much cheaper parts than what I ended up with but I paid a premium to have my parts come in 3 days instead of 3 weeks.
EL Tape (Didn't use the battery pack that came with this one) ($9)
EL String with battery back w/ built-in splitter (Didn't use the white string) ($13)
3M VHB Clear Mounting Tape ($5)
A helmet to apply the products onto (I used a Bell RS-1 Corsa sprayed with black PlastiDip)
No need for an instructional video or "design string". Use plenty of normal tape beforehand to plan out the design. I probably went through 20 ft. of tape before I came to my final design. Cut thin pieces of the clear mounting tape and run the wire/string alongside it. I also used the tape to mount the battery box but I don't trust it long-term. Will eventually figure out a more stable way of mounting it.
Be meticulous and precise and the results should turn out amazingly. I spent around an hour and 20 min. cutting the tape and running the EL string and 20 min. doing the EL tape.
Now, as none of us have actually seen the final product of the official LightMode Helmet kit, I can't say if what they are providing is the same thing. My helmet looks terrible in daylight (as seen in the not-in-the-dark photos) but for sure looks just like the product being shown in their promo video.
Thanks.
I'm going with this 12v 4-pin light strip with these splitters and to keep it clean, some extension and right-angle options.
this and this were the closest i could get without going over. i found so any other combos that were only over by 2 cents but whatever!
thanks for the contest!!
Yes! I used THIS LED strip in my latest computer build. I have an NZXT H440 Black/Red case, and I ran the strip around the edge of the window. I have an Arduino Uno with a driver made from three MOSFETs soldered up to the strip, and sticky-foam-taped to the base of my case.
To control the strip, I wrote up a nice little Python program with a GUI that lets me pick any RGB color of the rainbow. Next step is to pulse the lights to Window's audio!
SUPERNIGHT WIFI Wireless LED Smart Controller Working with Android and IOS System Mobile Phone Free App for 16.4ft 300 LEDs RGB LED Light Strips https://www.amazon.com/dp/B01JS0KEBW/ref=cm_sw_r_cp_api_FqqMzbG0TD3SS
You can flash this to work. Google it.
favorite gift so far was probably my coyote claw, I was so tickled when I got it.
I could use some of this for Halloween, and at .10 cents apiece, you could maybe do a couple of them, provided they all ship together.
I like cheap, https://www.amazon.com/econoLED-Flexible-Multi-colors-Non-waterproof-Changing/dp/B006LW2NJM if you are okay with just RGB.
​
You could go with something like this for RGBW: https://www.amazon.com/LEDENET-Bright-Flexible-Non-waterproof-Lighting/dp/B00MA7WD9M
​
Any 12V strip will work.
IKEA Dioder RGB
https://www.ikea.com/us/en/catalog/products/50192365/
It's a lot more expensive on Amazon: https://smile.amazon.com/Ikea-201-194-18-Dioder-Light-4-Piece/dp/B00R8H98V0/ref=sr_1_8?ie=UTF8&qid=1524696064&sr=8-8&keywords=ikea%2Bdioder&th=1
It looks nice and works well. I have two strips mounted on the verticals and the controller mounted on the left one.
https://i.imgur.com/fO55U9h.jpg
use something like this! you just have to find a way to secure the battery pack. I wanted to do this last year but decided against it because I want as little weight on my body as possible for maximum boogie, but I've seen it done and it works well
https://www.amazon.com/Starry-String-Lights-Flexible-Copper/dp/B00I7M7C40
Amazon, didn't see it looking quickly but found this one that's 10ft and only 4.80* with free shipping.
This is my next project...
https://github.com/steve228uk/homebridge-magichome
SUPERNIGHT WIFI Wireless LED Smart Controller Working with Android and IOS System Mobile Phone Free App for 16.4ft 300 LEDs RGB LED Light Strips https://www.amazon.com/dp/B01JS0KEBW/ref=cm_sw_r_cp_api_XJn-ybKJ9WEBS
Alightings 4pin LED Connector Connect Wire to Strip, Applicable for 10 mm 5050 RGB Waterproof LED Strip Lights, 22 - 20 AWG Cable Without Stripping the Wires https://www.amazon.com/dp/B01I8CDF58/ref=cm_sw_r_cp_api_jKn-ybEXT5PVQ
EvZ 4 Color 10m RGB Extension Cable Line for LED Strip RGB 5050 3528 Cord 4pin https://www.amazon.com/dp/B00DPQMKBS/ref=cm_sw_r_cp_api_yKn-ybSYT4318
EPBOWPT 12V 5A Power Supply AC Adapter for 5050 3528 RGB LED Strip Light Low Voltage Device https://www.amazon.com/dp/B01KT20TNG/ref=cm_sw_r_cp_api_OKn-ybWC82QCH
SUPERNIGHT (TM) 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Strip Light https://www.amazon.com/dp/B00DTOAWZ2/ref=cm_sw_r_cp_api_4Kn-ybSM88NFB
https://www.amazon.com/Logisys-LDXRM12C-Adhesive-Flexible-Extendible/dp/B00H34FPZG
Just picked this up...easy to install, looks great, $20 you cant go wrong
Just dropped by to say, PLANTS AND LAMPS AND PLANTS AND LAMPS AND... yeah. Consider a light curtain along a bland wall -- or you can thumb-tack strings of warm white LED lights into artistic shapes to both brighten and add interest to your walls.
It looks sad because there's nothing alive in there. Cut a snippet of ivy that's hanging out onto the sidewalk, stick it in dirt, water it occasionally, and you'll have a wonderful air-cleaning houseplant.
E-L Lighting, it's super fuckin cheep on amazon.
http://www.amazon.com/Portable-Wire-Feet-Long-Blue/dp/B0041H2X7Q
almost forgot, you're going to need a controller, and batteries.
Amazon! I had sheer curtains I put in front of them.
Twinkle Star 300 LED Window Curtain String Light Wedding Party Home Garden Bedroom Outdoor Indoor Wall Decorations, Warm White https://www.amazon.com/dp/B01LLSNG1E/ref=cm_sw_r_cp_api_i_Kl.MDb0H33W2V
Gotta say first that I like the Part 1/B thing.
Also, didn't realize it was an extra special pi day until I read this.
With that being said, this is my closest item to $3.14.
And this is probably the most science-y thing I've got.
If I were to do it again, I'd use EL wire for the halo.
Here you go :) 2.4 oz. I always grab a pack before festivals or camping trips.
Here you go. I used this EL wire and just glued it around the edges. I also covered the remaining wire leading to the battery pack in electrical tape which ended up being kind of crappy, but still worked. I would recommend something else to cover it unless you're really good with the tape.
You’d be better off not using an inverter, since you’d be going DC > AC > DC.
If you bought something like I’ve linked, you can look at the sticker on the plug when it arrives to see its output, and then connect up however many batteries in series to match.
Then just chop the cable and use some croc clips or something to connect it all up
https://www.amazon.com/gp/aw/d/B00I7M7C40/ref=mp_s_a_1_13?ie=UTF8&qid=1527608976&sr=8-13&pi=AC_SX236_SY340_QL65&keywords=led+string+light
Which PSU kit would you recommend instead? I can still return it and get a different one instead. As long as it isn't more expensive (or is only barely more expensive) As to the screw kit: http://www.amazon.com/iFixit-54-Bit-Driver-Kit/dp/B008KOTNVA/ref=sr_1_1?ie=UTF8&qid=1452799451&sr=8-1&keywords=ifixit+54-bit+driver+kit
I also bought a ground bracelet which only cost 4 dollars. Which I guess isn't worth mentioning at a price that cheap.
Finally: I bought something that will not effect the computer in any way other than make it more 'pimped out' with the color of the case. Here's what that is: http://www.amazon.com/Logisys-LDXRM12C-Adhesive-Flexible-Extendible/dp/B00H34FPZG it cost me 20 bucks.
I also failed to mention that the price I paid (after rebate) for all of this is actually $1140. $1200 is how much I paid at the store BEFORE rebate. And since the prices you mentioned were only slightly less than that (without factoring in the screw kit and lighting system which cost more than the difference) it seems to be I got a fair deal price-wise. You say I don't need this much RAM although I suppose I'll keep it anyway. I'm definitely open to switching my PSU though. Although again, it cannot be much more expensive than the one I already have, and if it's the same price (or less) that's all the better.
I got this set, cheaper and look great! Efrank Set of 4 LED Light... https://www.amazon.com/dp/B00XJKOCBG?ref=ppx_pop_mob_ap_share
EL Wire is awesome, and for the end you can just shape a plastic container to it, put a blue LED in there thats hooked up to a 9V battery. You can even buy conducting glue if you don't want to solder anything!
J-J-J-Janna
https://www.amazon.com/dp/B00H34FPZG/ref=cm_sw_r_cp_apa_EgUozb0PBMNKK
I got this one at first and it worked fine but then swapped to Cable Mod LEDs because I wanted more and brighter LEDs.
ESP8266 is the ticket. But no need to reinvent the wheel.
The H801 and Arilux (goes by a bunch of names, just search for wifi led controller) are both ESP based and have several firmware options.
Some of the better firmware options I've come across:
Espurna Has a nice interface, but doesn't provide a dedicated white channel. I also had some problems with flickering on my white lights. Would look at again if I decide to do RGB.
Tasmota Works with the H801 for sure. No reason it shouldn't work with the others assuming you configured the correct pins.
ESPEasy I'm using this with the Lights plugin. Seems to work the best for the white channels. A little more involved as the standard release does not come with the Lights plugin.
Similarly, Amazon has some great options.
They probably use the type of neon wire you can buy online and just zip tied or glued it to the umbrella rim. You can see the battery box on the handle.
https://www.amazon.com/Blue-Neon-Glowing-Strobing-Electroluminescent/dp/B003J99JW4
I would think this could be quite fragile. I bought a product called live wire years ago and it broke very easily due to twisting/bending it too much. Who knows how it would hold up in the rain. Would probably be best to attempt some kind of water-proofing by wrapping it in plastic as the umbrella itself won't be able to completely shield it.
Yep, here's a link to the lights: http://www.amazon.com/gp/product/B004DZBYXK/
They come in lots of colors, and only cost $6.25 with prime. I didn't put tubing due to the limited space, since I'm cramming a whole bunch into the bat display.
What Kind of tube were you going to put in? Is it something you bought or made?
Just a single N Cell in the holder; there's more than enough room in the head to fit something like a finger light. I'll probably magnetize a mount for the light and the right-hand side of the head; less effort than wiring a switch down to the base, and an LED will run for dozens of hours off a few button cells.
I also have a Brand New in Open Box, Silverstone FT03 Mini in Black with a free RGB LED Strip for only $85 shipped. Lemme know: Case Link
RGB Strip Link + Check out some of my other stuff! Reddit LINK
Just get a pair of comfortable sunglasses, buy some cheap el wire, glue the el wire along the rim in a way that's functional and clean, then just cut off the excess wire and you're set.
Maybe have strands of EL wire as the strings of the chime? Check this one from amazon : https://www.amazon.com/Zitrades-Portable-Halloween-Christmas-Decoration/dp/B00BUIPGK0/ref=sr_1_4/168-9213074-8606901?ie=UTF8&qid=1478199198&sr=8-4&keywords=el+wire
If you need brighter lights, maybe use really thin LED string lights?
my inspiration for the build.... http://i.imgur.com/OoK8z2v.jpg
will this work ? has anyone ever used this ?
http://www.amazon.com/Blue-Neon-Glowing-Strobing-Electroluminescent/dp/B003J99JW4
Depending on how much exactly you have to spend and the amount of time you have before the event maybe you could use something like these? The ones linked seem to be hit and miss according to the reviews but it might be worth looking into. You can also find these kinds of things in some dollar stores (if you're in the US). Depending on how many kids you need them for each kid could get 1 or 2 to use. You might also need to be careful since some times these can be a bit bright and it'll be dangerous if pointed directly at someones eyes (though the same could be said about any LED lights).
You can buy the El-wire online. There's some on sale via Amazon. They come in 9ft lengths with a battery pack attached. :)
http://www.amazon.com/Blue-Neon-Glowing-Strobing-Electroluminescent/dp/B003J99JW4
here's the link - It works great, even comes with little metal brackets to screw in to the back of the desk.
http://www.amazon.com/Ikea-501-923-65-Dioder-Multicolor-4-Piece/dp/B00R8H98V0/ref=sr_1_1?ie=UTF8&qid=1421200432&sr=8-1&keywords=ikea+dioder
IVE BEEN GOOD I SWEAR
A piece of PVC pipe, some LED strips or EL Wire zip tied around it in a spiral and there ya go. You could make something like that in 20 minutes.
To do it on the cheap and easy, order these, each strand is 9ft long. Take the battery pack to Home Depot and find a 10ft length of PVC that it will fit inside of, probably 1-1/4" or 1-1/2" and get a couple end caps.
Drill a hole in the end caps and stuff the battery packs inside each end, run the EL Wire out the hold and around the pole. Zip tie in place and there ya go.
Not fancy or anything, but dead simple and cheap. LED strips would be brighter.
An LED strip like this rigged to a 12v power supply, batteries stuffed into the PVC would work and be a lot brighter. Plus you'd have a remote for changing the colors.
Uhhh This might be something you'd like... I see some comments about day Z and zombie apocalypse here. A quick toolkit is excellent and necessary for hotwiring abandoned cars, or breaking into storehouses, or what have you.
I don't think I can buy a lockpick on amazon otherwise I'd suggest that. ;)
You could put some electroluminescent (EL) wire on your bike like this. I bought this on Amazon, it's really cheap and doesn't take too long to wire tie it onto your frame.
Purple monkey dishwasher
Thanks!
Thanks for the suggestion! After some more research I found these and am going to get them for my new setup.
I don't actually know, it was just an example of the types of things you can find out there. Amazon has them as well. EL Panel and EL Wire. Though in that case you would need to do a bit of splicing and soldering to make it run off of one battery pack.
EL stands for Electro-Luminescent, meaning when you run a current through the material it gives off light.
Here you go.
I've got a couple of these at home working just fine with homeAssistant. Just make sure you have your own 12v DC adapter
I saw your edit, it's a really simple and nice molex connecting LED strip. It called Logisys LDXRM12C.
Like el wire?
http://www.amazon.com/Portable-Wire-Feet-Long-Blue/dp/B0041H2X7Q/ref=sr_1_3?ie=UTF8&qid=1382312947&sr=8-3&keywords=el+wire
http://www.youtube.com/watch?v=lOqbhBZ0S9M
Nighttime party kit:
LED blinky rings or fingers http://www.amazon.com/LED-Finger-Lights-pcs-Generic/dp/B0045H0L1W
earplugs
piece of candy
I have no idea what else would go in there.
I like the mini cocktail in a tin plan.
Electroluminescent wire from Amazon :-)
https://www.amazon.com/dp/B00EE240RY/ref=cm_sw_em_r_mt_dp_U_mjYUDbG9TGW74
I just went to Amazon and bought mini LED strip lights and glued them into the existing hood. They come in a huge variety of sizes, so just choose some that you can arrange in what you have.
These are what I got. But other sizes are available.
I poked around some and found this EL wire on Amazon that's pretty inexpensive. This is another source that may help out. I suppose you could go with a fluorescent fixture that is quite common in industrial areas but that would require some additional tools and possibly wiring knowledge.
Are you looking for some sort of atmospheric all-around glow or a stark, minimalist look?
I think you'll want to go with EL tape, amazon has it decently cheap. Each piece will come with an inverter on each end, and you can cut it it half and have two working pieces. I'm sure you would be able to spirit gum it to yourself. EL wire wont get your effect fully since it is a lot thinner.
http://www.amazon.com/Blue-Glowing-Strobing-Electroluminescent-Robbin/dp/B008GXRL1O/ref=sr_1_1?ie=UTF8&qid=1380722166&sr=8-1&keywords=el+tape
Thanks. These were the lights that I got sed:
https://www.amazon.com/Efrank-Bar-Under-Kitchen-Cabinet-Energy/dp/B00XJKOCBG/ref=mp_s_a_1_6?ie=UTF8&qid=1542592748&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=led+lights+cupboard+4&dpPl=1&dpID=31%2Ba-Rcpe0L&ref=plSrch
You mean like this?
I know you are in RSA but if this is available there. it's worth it. it works, it's cheap and it's damn durable, 3 years now :)
https://www.amazon.com/Logisys-LDXRM12C-Adhesive-Flexible-Extendible/dp/B00H34FPZG
If you have Amazon Prime then just search EL Wire and you'll get it in 2 days. Even without Prime, you'll probably get them super quick.
The wire comes in a variety of colors and lengths. They have a controller pack that comes with and usually requires 2 double A batteries.
This link below is for a 4 pack but you can get them singularly or in larger packs. Its up to you.
https://www.amazon.com/Pack-Glowing-Strobing-Electroluminescent-Controllers/dp/B00ORGCOG6/ref=sr_1_5?ie=UTF8&qid=1464784170&sr=8-5&keywords=el+wire
ADDITIONAL INFO:
I'm looking for a throw pillow as well as a blanket for the foot of my bed! For the pillow I'm thinking something with a different texture (velvet, knit, fur, dunno) and maybe a knit for the blanket? Again, dunno. I'm new to this whole "caring about my surroundings" thing. I'm just looking for one throw pillow, I don't want to deal with having a bunch of pillows I have to move every morning and night. Also, don't know if relevant, but the metal colour for my room is gold.
Duvet Cover: https://www.target.com/p/reversible-bogaterra-floral-duvet-cover-set--full-queen----opalhouse--153-/-/A-53080750
Sheets On My Bed: https://www.target.com/p/300-thread-count-organic-cotton-solid-sheet-set-threshold-153/-/A-51818784?preselect=54154464#lnk=sametab
​
Hanging Plant Holders: https://www.amazon.com/gp/product/B07MT7VGX9/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
​
Lights: https://www.amazon.com/gp/product/B01LLSNG1E/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
​
Two Other Sets of Sheets I Rotate Between: https://www.target.com/p/queen-solid-easy-care-percale-cotton-sheet-set-rose---opalhouse--153-/-/A-54278897
https://www.target.com/p/organic-cotton-printed-sheet-set-300-thread-count-threshold-153/-/A-13712146?preselect=51598371#lnk=sametab
https://www.amazon.ca/LED-Finger-Lights-40-pcs/dp/B0045H0L1W
Or Party city if you live in Canada
just buy the typical 16 foot spool off Amazon for like 10 bucks.. cut it to your own length (2 meters probably max supported on an RGB header), plug it into the RGB header.
I just pick a random manufacturer that has decent rating on Amazon, but this the one I bought: econoLED 12V Flexible SMD 5050 RGB LED Strip Lights, LED Tape, Multi-colors, 300 LEDs, Non-waterproof, Light Strips, Color Changing, Pack of 16.4ft/5m Strips https://www.amazon.com/dp/B006LW2NJM/ref=cm_sw_r_cp_apa_iVSazb46NR2QD
Some right angle connectors if u need it:
10X L shape 4 Pins Connector JACKYLED 10mm Non-waterproof Quick Splitter Right Angle Corner Connector 12V 72W Clip for 5050/3528 SMD RGB 4 conductor LED Strip Lights Strip to Strip (22Pcs Clips) https://www.amazon.com/dp/B011BD2B5Q/ref=cm_sw_r_cp_apa_BWSazb8PFRMJN
If your motherboard has headers for them, like an Asus with Aura, then they'll work. If you have the headers, I'd go for a spool of RGB 5050 type LED strips. You can get one that's like 25 feet for 10 bucks or so, and just cut to size. You may need some of the connectors which are also cheap. The spools usually have 2 connectors, one on each end.
I use the conoLED 12V Flexible SMD 5050 RGB LED Strip (aka the generic Amazon LED Strip): https://www.amazon.com/gp/product/B006LW2NJM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
just make sure you buy the ones that come directly from amazon! They are about a couple bucks more expensive but they ship faster so it's worth it!
edit: Link
I would recommend the Tron LEDs instead. They are cheaper, and they look a lot cooler.
If you were looking for a project, you could buy a full face and do something with EL wire like this...http://www.amazon.com/gp/aw/d/B0041H2X7Q/ref=mp_s_a_1_2?qid=1375474125&sr=8-2&pi=SL75
I got http://www.amazon.com/gp/product/B005EVV8LK/ and recommend it. For a few dollars more you get a ton of extra bits.
The LED strip you linked won't work with that ballast. Those are WS2812 addressable LEDs, they require a controller with a clock output, the FLS-PP only outputs a PWM signal to each R/G/B/W line of the strip. It can be used with something like this:
https://www.amazon.com/econoLED-Flexible-Multi-colors-Non-waterproof-Changing/dp/B006LW2NJM/ref=sr_1_5?ie=UTF8&qid=1519790977&sr=8-5&keywords=rgb+led+strip
Remote for RGB LED light strips.
http://www.ebay.com/itm/New-44-Keys-Mini-IR-Remote-Controller-for-3528-5050-RGB-LED-Strip-Lights-US-/182339821550
for lights like
https://www.amazon.com/Econoled-Flexible-Multi-colors-Non-waterproof-Changing/dp/B006LW2NJM
Other options include a remote-controlled LED setup Like this one or a Corsair Link Lightning Node that illuminates at a certain temp and running a stress-test on boot.
Think any of these will work for you /u/AngelosEirwen ?
I'm digging it myself, especially being a SH fan too. Because it wraps around the toys and machines, I'm assuming it's probably electroluminescent wire or mock neon LED strip like these here
https://www.amazon.com/dp/B00EE240RY/ref=cm_sw_r_cp_apa_i_GRboDb7DN5H2B
https://www.amazon.com/dp/B01JZ74KEA/ref=cm_sw_r_cp_apa_i_zTboDbZM9H421
Link plz? Also do they do purple?
Edit: Found them
UK (Amazon) - Around £60
US (Amazon) - Around $30 (60% Off)
I picked up one of these. I figured if I am just looking for the one specific type, I might as well get something that can be used in the future in case I need the others.
i have these lights here really easy to install but you would prolly need a few strips to light ur case up, you could also check out the nzxt hue+ a bit more expensive though.
$60-70 for this? You could've just did your own DIY and bought the el wire from Amazon for $7...also, all el wires give off a buzzing sound from the battery pack. Won't be noticeable while riding though, I'd believe.
http://www.amazon.com/Blue-Neon-Glowing-Strobing-Electroluminescent/dp/B003J99JW4/ref=sr_1_1?s=home-garden&ie=UTF8&qid=1413525911&sr=1-1&keywords=el+wire
The only solutions I can think of for you is using a IR module
If you don't want the remote, you could try using a Wifi module.
Then to power it, you could use something like this or figure out a path to run the wire in from your wall adapter.
Shop around, you might be able to find a kit for around the same price but this should give you a basic idea of what you may need.
Glowsticks aren't allowed so stash them well. Fingerlights are allowed so you can bring them without worrying about them being hidden. Fireworks glasses don't glow, but they enhance all other glow toys and stage lights.
Strap one of these under and around your desk and you'll be the coolest one in the office after a couple of hours ;)
Edit: Pimp my cube
Yeah, sorry. These are the one I was looking at...
http://www.amazon.com/Blue-Neon-Glowing-Strobing-Electroluminescent/dp/B003J99JW4/ref=sr_1_1?ie=UTF8&qid=1370143024&sr=8-1&keywords=Led+string
econoLED 12V Flexible SMD 5050 RGB LED Strip Lights, LED Tape, Multi-colors, 300 LEDs, Non-waterproof, Light Strips, Color Changing, Pack of 16.4ft/5m Strips
https://www.amazon.com/dp/B006LW2NJM/ref=cm_sw_r_cp_api_i_VzfzCb65QFHBM
I use an OITTM WiFi controller to change the colors and schedule
I think pre-made, specifically the one here from amazon.
Actually my sister has some
Of these and they are all on a single plug. You can find them on amazon. https://www.amazon.com/dp/B01LLSNG1E/ref=cm_sw_r_cp_api_YYVKAbHEJV1NG
This is what you're looking for. LED Light Strip - 12V they're about as simple as you can get. If you want to get fancy, you can make a barrel jack connector for you 12V battery and run this with colors.
I am looking at this led strip and this is the LCD Screen i have currently (the Waveshare 4inch RPi LCD (A), 320×480, IPS)
If you look at this picture you can see which pins the LCD screen it uses.
And for the LED Lights, It seems like I need at the very least 1 ground, 1 5v pin and one empty gpio pin (if i use a relay). If i wanted RGB i could also specify any 3 gpio pins according to this
I was looking at using a relay to control the light (I don't care about the color i just want light to be able to see) but I don't really have a preference how the lights turn on, i just want to be able to control it with the PI instead of a physical switch.
https://www.amazon.com/dp/B00EE240RY EL wire in a colour of your choice, or get the multi-pack. Some are sound sensitive, most will have 3 modes Flash, Strobe, and Solid On. Either that or check out the dollar store for battery powered christmas lights
They are not, but they remind me of, LED finger lights. If you just want things that size that light up, and don't need to blink, they're in dollar stores everywhere.
El wire the heck out of it
https://www.amazon.com/Portable-Wire-Feet-Long-Blue/dp/B0041H2X7Q
and maybe this if you want to change it up some
https://www.amazon.com/YIHONG-Waterproof-Halloween-Thanksgiving-Multicolor/dp/B074M44DNY/ref=sr_1_6?s=hi&ie=UTF8&qid=1518793456&sr=1-6&keywords=flashing+led+wire
those are actually 12v power adapter ones, here's a shorter one you don't have to worry about cutting the strip of: http://www.amazon.com/gp/product/B00H34FPZG?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
It says in the YouTube description.
https://www.amazon.com/Blue-Neon-Glowing-Strobing-Electroluminescent/dp/B003J99JW4
I bought these on May 12 and got them yesterday, so about 2 weeks. ymmv
http://www.amazon.com/Blue-Neon-Glowing-Strobing-Electroluminescent/dp/B003J99JW4
Buy EL wire on Amazon
http://www.amazon.com/Blue-Neon-Glowing-Strobing-Electroluminescent/dp/B003J99JW4
All inclusive
It's called EL Glow Wire
This is the stuff