(Part 2) Reddit mentions: The best body & trim

Day one -- get some ZL1 rock & mud guards, hellcat spoiler swap, luxe taillight/sidemarker tints, and inside/door LED light swap. Pretty much the most affordable and easy mods you can do. The spoiler may be a bit pricey.

The rock & mud guards will run you about $95 after shipping.

The luxe taillight and the luxe sidemarker tints will run you about $35 and $25 respectively.

The LED swap can run you anywhere between $10-$30 depending on what you find. This was one of the first links I found. If you want to swap the map bulb (these lights that are above you that comes on automatically) you need to get another kit but it's pretty cheap at around $8.

The hellcat spoiler swap will run you a little over $100 with shipping. The one I linked fits in the holes already drilled for the stock spoiler (if you have one). If you don't have one, you'll need some drilling done. If you have one, you may need to fill a hole or two on either side of the trunk.

Overall these quick and easy mods will run you about $300 or so but will drastically change the look of your car.

Further mods that I recommend are exhausts (catback exhausts are your best bang for your buck, though they'll run you upwards of $1,000+). If you're interested in changing out the exhaust, look up American Thunder by Flowmaster or Borla S-Type/ATAK. If you want to hear what an S-Type sounds like, I posted a video not too long ago. Also, for the exhausts, it doesn't matter if they're made for RWD or AWD. The Chargers aren't different from the cat back when it comes to transmission/drive-train so RWD exhaust systems will fit the AWD vehicles.

A cold air intake can also be a slight improvement. Though there's negligible hp/mpg gains, it deepens the exhaust of the car a bit. I found that after I put mine on, my exhaust had a deeper and more rumbling tone. And, it makes a cool noise too.

Unless you're powder coating, I'd leave calipers alone. The paint never lasts as long as they're advertised to. Besides, the grey/silver calipers look nice even if left stock.

(relatively) inexpensive mods I've done:

• Window tint; not only looks good, but saves you $$$ over time as your car uses less energy to keep the cabin cool
  
• if you have aero wheels, you can take off the hubcap and cover the center hole and lugnuts with a kit that costs $50 from Tesla.
  
• Might be placebo, but I believe this helps wind noise:
  https://www.amazon.com/AY-Customs-Windshield-Dampening-Reduction/dp/B07N1DXSH5
  RPMTesla makes one too, but costs more and they have less than stellar customer service, according to this sub.
  
• Full chrome delete may be pricey if you pay someone else, but there are inexpensive wrap for just the door handles on amazon, and are easy to install. Your hands will thank you on hot sunny days.
  
• Tesla's paint repair kit. It's a great kit and I've already repaired several rock chips on the side panels, hood and front bumper and they disappeared completely. Follow their video instructions. You'll never consider an expensive wrap after learning how to do this properly.
  
• Not exterior, but /u/kenriko's excellent center console wrap really transforms the fingerprint-magnet interior.

1. thrustmaster wheel base servo (ts300rs),
   
   If I can recommend then it would be TS300RS servo first of all. It's belt-driven, which translates in to a very smooth and high precision steering motion compared to the geared setup of Logitech. Lots of people would argue that the difference is negligible and start talking about some 'dead-zone' issues on TS300RS, well, I don't see that with my setup and compared to the geared one from Logitech i prefer the smoothness of the belt drive system. It's very powerful, kicks like a mule, but very smooth etc etc..
   
   https://www.amazon.com/Thrustmaster-T300RS-Racing-Wheel-Servo-Base/dp/B015PIIMMY/ref=sr_1_1?s=videogames&ie=UTF8&qid=1495570718&sr=1-1&keywords=thrustmaster+servo
   
   
2. alcantara ferrari wheel - it's the largest one (30cm) available.
   
   It's simply the best wheel for TS300RS out there in terms of type of a gameplay rally requires. It's the largest one available, and is covered with real suede leather providing excellent grip and eliminates sweaty hands.
   
   I originally bought the combo with servo/standard wheel/standard 2-pedal set for $388 but then realized that the extra $188 could've been spent on pro pedals, an then another upgrade for the wheel, an ultimately h-shifter.
   
   https://www.amazon.com/Thrustmaster-Ferrari-599XX-Wheel-Add-Alcantara/dp/B014US048A/ref=pd_sim_63_2?_encoding=UTF8&pd_rd_i=B014US048A&pd_rd_r=2QR2ZAWBSK8X69T7STNK&pd_rd_w=Elrnr&pd_rd_wg=lwY3O&psc=1&refRID=2QR2ZAWBSK8X69T7STNK
   
   Buying TS300 RS + alcantara + T3PA-PRO(!) is the only combination to fully enjoy this game (speaking about the Thrustmaster brand).

You could probably use something like a christmas tree fastener, or plastic rivets. There are push type plastic rivets and ones that require a special riveting tool to use. I know early 2000's on Chrysler loves using plastic rivets. My old 97 grand prix had some of the christmas tree fasteners holding plastic parts to metal similarly to that, so that would be my first guess.

Edit: looks like they might use something like this: https://www.amazon.com/Nissan-Universal-Fender-Retainers-Diameter/dp/B0093RRSXS Those are like the push pin styled rivets I was talking about. Scrolling down in the QA section, it looks like they fit an 10 splash shield. You'd want to measure the hole size and get the appropriate sized fastener.

Oh yeah the sound system is great in these cars Fender did a good job. Yep just like the GTI badge. I was really glad to see they added that and the red lipstick to the new models. Finally showing the GLI a little love, now if we could just get a sport model like the GTI. If you were interested in adding the lipstick I did it myself on my 13 with just some red vinyl racing stripe tape like this. Here's a pic of how it came out sorry it's a little dark but the best I could find.

My vote goes to the BesTop Trektop NX. I've only had mine for about a year, so only time will tell how durable it is. However, the zippers and top material are much sturdier than the QuadraTop I previously had, but you certainly pay for it. I really like the sunrider feature, which allows you to flip up the front of the top, so if you want a little more openness but don't want to take all the windows out then it's a super convenient option. Also, the bows that go from either side of the roll bars really help cut down on wind noise. https://www.amazon.com/gp/aw/d/B004P23VNW/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8

Eyelids are from Amazon
https://www.amazon.com/etopmia-Black-Headlights-Eyebrow-Eyelids/dp/B01DZK8YLS/ref=mp_s_a_1_1?keywords=gti+eyelids&qid=1559095312&s=gateway&sprefix=gti+eye&sr=8-1
Tail lights from here, but you can get from multiple sites. I have the Helix ones but they also sell the Ed reps. They are pretty much the same. It's the same vendor.
https://www.fastuningstore.com/products/vw-mk7-golf-gti-golf-r-helix-mk7-5-replica-led-taillights

Nice yah I like the Mudflaps plus it helps keep the sides clean.

Get a Euro switch, allows you more options for running lights and headlights and is superior. Easy to install, too.

I have one of these and I love it, combined with blindspot mirrors on your outside rear views, it makes for a much safer driving experience. And looks neat.

And yeah, vinyl wrapping the brushed aluminum.

Total cost: $31.70

Time: ~30 minutes.
Tools required: Hand drill

Now that it gets dark so damn early, I've been using my headlights a lot more, and I noticed that they weren't as bright as they used to be. So, on the advice of a coworker, I picked up THIS headlight restoration kit from amazon, as well as THIS sealer and THIS masking tape (to protect the paint around the lens). The directions were clear and concise and the whole process took about 30 minutes and was extremely easy. It comes with an attachment for your hand drill to which a variety of sanding/buffing discs mount. You start with a coarse grit sandpaper disc to remove the oxidation and then you use progressively finer grit discs to smooth out the surface. Finally you buff and seal the lens.

I couldn't be happier with the results. The lenses look brand new and there are enough sanding discs left over to do at least one or two more cars.

I have a q50 so the part could be different but on my car they are held on with the plastic push anchor things- black "washer" with insertable portion and a center part that expands the washer and is removed with a flat head.
They are all over the car, for a temporary fix I'd check the engine bay over your radiator area, there should be about a million of them holding the ram-air-box-cover-majigger in place. also probably some in your trunk.
This is them but I'd be willing to bet a dealer will replace it for free.

Edit: pretty sure it's Part No. 01553-2DR9A but it'll set you back a pretty penny- 11 of them to be exact, haha

Easily the t300 gt it runs about 360 [on the German amazon] (https://www.amazon.de/gp/aw/d/B01HRYFODO/ref=mp_s_a_1_1?__mk_de_DE=ÅMÅZÕÑ&qid=1491256865&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=T300+gt&dpPl=1&dpID=41FH4dYDMKL&ref=plSrch). You can add a shifter. Or get this version which has a better Alcantara rim. Either way both these wheelbase will provide much better force feedback, better pedals and the Ferrari bundle a better rim than the Logitech offering.

Yup, frameless is nice. I have a hardtop for winter, but this past summer bought the Bestop NX Frameless .

Being able to just zip off the sides and back is really nice. I also really like the sunrider feature, which is basically a sunroof for driver and passenger. And yes you can drive with it open on the freeway.

​

Of those 3 the TX (XBox version of the T300) has the best FFB, but has the crappy 2 pedal set.

The T150 has slightly better FFB than the G29.

The pedals of the G29 and T150 RS Pro are roughly the same, both decent.

I assume the G29 price does not include the shifter (you need to buy it separately), so I would say the T150 is the better choice at that price.

Me, I'd spend a little extra for something like the T300 RS GT Edition (T300 with a decent 3 pedals set similar to the G29's/T150 RS Pro's).

I couldn't find any adapters for the T150. The T300 has some though.

I have these on my TJ. I just recommend replacing the giant hand-turned bolts with some hex head bolts, as they are easier to get really tight (the size you will need is M8-1.25, but I can't remember how long it needs to be). The ones that come with it are hard to tighten and may result in your mirrors folding back in at highway speeds. Aside from that, they are pretty sturdy. Took them out on the trail and even with all the shit that hit them, they didn't even bend.

I love those cup holders and have the same ones. Definitely worth getting! Here is the link to those if anyone is interested:

​

https://www.amazon.com/gp/product/B07MZ9TCYP/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Thanks!
Hood deflector was the AVS 21681: https://www.amazon.com/gp/product/B018AIGTGC/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
The window visors were AVS 994036: https://www.amazon.com/gp/product/B01AIFTSEU/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

I highly recommend the visors, I had gotten my dad some normal ones at his request for his Tacoma and didn't like the way they bulged out, but these are perfect, you can't really tell they are there from straight on.

These are the best purchase I ever made. They cost pocket change and if you adjust everything right my blindspot is nonexistant. I watch cars go from my rear view to my side view to my blindspot (mirrors) to my peripheral vision. If there is a blindspot, its too small to make a difference.

Partly why I was thinking the 7 mirrors would be excessive but as op explained about people with limited upper body movement that makes sense.

They're also great for helping newer drivers learn how to back into spots since they can look at the lines and get a point of reference! Really helped my girlfriend out when she was learning

Go to Amazon and order this (I like Meg's products),

• Harbor Freight DA
  
  
• Meg's Endurance Tire Gel
  
  
• Meg's Ultimate Protectant
  
  
• Meg's Ultimate Liquid Wax
  
  
• Meg's APC
  
  
• Rag Company's Borderless Blonde
  
  
• Rag Company's Waffle Weave
  
  
• Hex Logic White Pad (3)
  
  
• Hex Logic Orange Pad (2)
  
  
• Hex Logic Red Pad (2)
  
  
• M105
  
  
• M205
  
  
• 3M Auto Tape
  
  
• Mother's Wheel Brush
  
  
• ABN Woolies
  
  
• Trim Brush
  
  
• Chem Guys Wash Mitt (2)
  
  
• Mother's Clay Bar Kit
  
  This should run you about $345 for everything and have you setup to take care of your car for a long time. You can find a 20% discount code online for harbor freight to bring the price down $55 for the DA. Go to home depot and buy a couple buckets and you will be good to go.
  
  Edit: To add, I went to Lowes and bought a cheap inline sprayer for my hose and it works fine for foaming up the vehicle, plus it only costs $5.
  
  Edit2: If you are going to downvote me please post why you don't like my recommendation.

Here's a link, you can get it in pretty much any width you want, so look at something like a ruler to get an idea of what you'd like. I would also make sure you have a sharp razor/cutting implement to give a clean cut end.

Pin Stripe Tape

I got mine from Amazon, and it is working out great for me, they are really all the same, just find one for a good price like this

I used these.

https://www.amazon.com/gp/product/B00CEKUO1O/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

My BIL is super good at drawing/tracing stuff and he loved the idea. I bribed him to do it and he spent the morning cutting, test-fitting, and applying them.

I like this one even better:

https://smile.amazon.com/gp/product/B07P2WT6B4

Has a slot that perfectly fits the J1772 adapter.

If you’re using the j1772 frequently, this center console organizer is great and fits the included adapter perfectly: https://www.amazon.com/dp/B07P2WT6B4?ref=ppx_pop_mob_ap_share. The coin holder part is removable.

Pro tip: if you like being alive, or if you like your kids being alive - always drive with your headlights on and also get these: https://www.amazon.com/dp/B001DKT0DO

But hardly anyone does either. Keep being you, lemmings.

Ah well there you go! I would think even if you had the legal colors it would make you more of a target for cops though. I personally like the stealth route since uh, yeah I am probably always speeding a bit.

If you want increase visibility, they make reflective tape that you can add to the back of your helmet, jacket, bike, etc.. Comes in black so if you have a black helmet it just blends in. I noticed that once I added a few big pieces to the back/sides of my helmet cars hung way further back from me at night.

Edit: this is the stuff I have:

https://www.amazon.com/Motorcycle-Reflective-Scotchlite-ME-RK-99/dp/B00CEKUO1O

I like the dmm from taco garage. It’s sleek and not crazy expensive plus it puts my phone in the perfect spot.

Also this organizer for the center console. . Totally worth the $20 or so dollar for the insert and the dividers.

> I asked the dealer about an engine break-in period, but he said it wasn't really necessary; sound correct?

1200 miles or so was when mine felt like it settled in, but that was on the auto.

> I've been planning to get some rain guards for it,

I have these for the DC, im sure theres an AC equivalent. I think they look pretty damn good

This mirror is excellent, and it takes 30 seconds to install. Unless there's some crazy feature you actually want out of that OEM mirror, the Broadview will be better.

Just make sure you measure the distance between your visors and pick a length that will fit between them, otherwise you won't be able to lower the visors.

Trimbrite T1118 1/8 Pinstripe Tape Red https://www.amazon.ca/dp/B00029XB1Y/ref=cm_sw_r_cp_api_o8M0BbA9GEJ5B

With patience and a steady hand, it can turn out amazing.

I picked up these mirror relocation brackets from Amazon a few years ago. Makes it much nicer if you have the doors off all the time to be able to still have mirrors. I keep mine on all the time and just move the mirror back on the right door as it's hard to see it otherwise.

Nice Jeep!

I have a thrusmaster TX which came with the plastic and rubber 458 wheel. I couldnt stand the feeling of the cheap wheel so I bought the alcantara 599x evo rim. Made the wheel 1000x better. I think it was like $150 for the rim but worth every cent. Buying a new rim is really the only way with the thrustmaster wheels.

https://www.amazon.com/Thrustmaster-Ferrari-599XX-Alcantara-playstation-4/dp/B014US048A?th=1

More pics: http://i.imgur.com/MwvS3y8.jpg http://i.imgur.com/dKpuEFV.jpg

Before: http://i.imgur.com/eatXv0p.jpg

I had someone do it for me, but if you are brave enough to do it yourself you can follow the guide in this forum: http://www.chargerforumz.com/showthread.php?t=176484&

Spoiler was bought here: https://www.amazon.com/gp/product/B00ZFTGD8Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Got these and they work great!!!

Fit System C0400 Driver/Passenger Side Stick-On Adjustable Blind Spot Mirrors - Pack of 2 https://www.amazon.com/dp/B001DKT0DO/ref=cm_sw_r_cp_api_i_N96MDbD5CEKPV

Got bored earlier today and was looking for the same thing. Found these liners on Amazon (https://www.amazon.com/Custom-Console-Liner-Acessories-Subaru/dp/B07MZ9TCYP) and they are pretty cheap and get good reviews. I ordered the red to match the stitching so it'll add a little color to the interior.

Nice, I found the clear ones I think

https://smile.amazon.com/994036-Smoke-Low-Profile-Ventvisor-Piece/dp/B01AIFTSEU/

Google is awesome!

https://www.amazon.com/Mazda-Urethane-Bumper-Spoiler-Models/dp/B00FEXCKTC

This deal is back, and a great value at $300! Although it is currently not in stock, Amazon will ship once it comes back in. B&H Photo Video does have it in stock for $329 with no tax out of NY: https://www.bhphotovideo.com/c/product/1194830-REG/thrustmaster_4169082_t300_ferrari_racing_wheel.html


Also the Alcantara wheel is available on its own for only $99: https://www.amazon.com/Thrustmaster-Ferrari-599XX-Wheel-Add-Alcantara/dp/B014US048A/

I got this one because it had a cutout for the J1772 charging adapter, which I use a lot to charge at home on my JuiceBox. Love it so far.

BASENOR Tesla Model 3 Center Console Organizer Tray Accessoies with J1772 Charging Adapter Holder, Coin and Sunglass Holder for Tesla Model 3

For high speeds you can try something like https://www.amazon.com/gp/product/B07N1DXSH5/
I use it and it helps

I just use this for my change in the center console. Works great for me.

Any of the Thrustmaster wheels should work on it.

https://www.amazon.com/gp/product/B014US048A/ref=s9_dcacsd_dcoop_bw_c_x_1_w

https://www.amazon.com/Thrustmaster-Ferrari-F458-Wheel-playstation-3/dp/B00CP4IKHE/ref=sr_1_50?srs=2530623011&ie=UTF8&qid=1521061859&sr=8-50

https://www.amazon.com/Thrustmaster-TM-Leather-Wheel-Add-pc/dp/B00TTQKSUS/ref=sr_1_56?srs=2530623011&ie=UTF8&qid=1521061859&sr=8-56

https://www.amazon.com/Thrustmaster-Sparco-Rally-Wheel-Add-383/dp/B0764415FS/ref=sr_1_1?s=videogames&ie=UTF8&qid=1521061911&sr=1-1&keywords=sparco+thrustmaster

If you want cheaper, maybe someone will sell your their 458 rim from the TX regular package or something.

http://www.amazon.com/gp/product/B001FAK28E/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1

You lose about 1/3-1/2 of the right side mirror with the door on though just fyi. They work great and never need to worry about two sets of mirrors either.

It's the GV Style front lip on Amazon :)

https://www.amazon.com/Mazda-Urethane-Bumper-Spoiler-Models/dp/B00FEXCKTC/ref=pd_lpo_vtph_263_bs_lp_t_1?_encoding=UTF8&psc=1&refRID=HVH4QC7EWP3V0VCCHSWA

I have stick on side mirrors that help with parallel parking. They might be worth it for the test if you’re allowed to drive your own car.

I really like the insert I got for my center console.
Got it on Amazon for $13

JDMCAR for Toyota Tacoma 2016 2017 2018, Center Console Organizer Insert ABS Black Materials Tray, Armrest Box Secondary Storage https://www.amazon.com/dp/B07C7WNDZG/ref=cm_sw_r_cp_api_l7PXBb8T8571M

You can buy the T300 Base for $244 from Amazon plus your choice of wheel like the Ferrari 599XX EVO Wheel Add-On, Alcantara Edition for $165, the TM Leather 28 GT for $150 or the Ferrari GTE F458 for $130 or you could listen to /u/isternes and go Fanatec for a few dollars more.

Rugged Ridge 11025.04 Black Mirror Relocation Bracket - Pair https://www.amazon.com/dp/B001FAK28E/ref=cm_sw_r_cp_apa_3l8CxbA82MYEF

Is what I bought and use on my JK Sport. Work just fine and a few bucks cheaper

If you have a TJ or jk, I like the rugged ridge mirrors. They come in round or square and the brackets boot to the existing windshield holes.

https://www.amazon.com/Rugged-Ridge-11025-10-Release-Relocation/dp/B0054RW1HE

Also these are awesome. They clip over your normal rear view mirror and allow you to see a far bigger angle, minimizing or eliminating blind spots.

The salesman I bought my car from owns a WRX and a STI and had it on his cars. He had a bunch of pinstripe tape, So i just got it from him. Not sure of brand/exact color but something like this: http://www.amazon.com/Trimbrite-T1118-Pinstripe-Tape-Red/dp/B00029XB1Y

Custom Fit Cup and Console Liner Acessories for Subaru WRX 2015 2016 2017 2018 2019 2020 (Red Trim) https://www.amazon.com/dp/B07MZ9TCYP/ref=cm_sw_r_cp_apa_i_o54mDbM6RE0EH

This was a total impulse buy and I don't regret it. Covers the door cup holders too

Apologies for the late reply! I'd use something like this.

Hey thanks man!

Here’s the link for the eyelids: https://www.amazon.com/etopmia-Black-Headlights-Eyebrow-Eyelids/dp/B01DZK8YLS

And as for what I’m lowered on, I just have the APR Rolls Control springs installed.

[I have these] (https://www.amazon.com/dp/B0054RW1HE/ref=cm_sw_r_cp_apa_VC-yzb2SC6CTX) they work pretty well, but maybe a little small.

It is probably custom order. Odds are that molecule is a major part of that guy's research.

Edit: On second thought, they are probably just a mix of This tape and letters like these.

etopmia Black Headlights Eyebrow Eyelids Trim fit VW MK7 Golf 7 https://www.amazon.com/dp/B01DZK8YLS/ref=cm_sw_r_cp_apa_gZdozbZSFBG6D (I dipped them to make them matte)

Have you tried an aftermarket seal like this: https://www.amazon.com/dp/B07N1DXSH5
$16

This is the type of stuff you want. It needs proper prep and cleaning to stick right though.

3M (38583 1/4" x 15' Exterior Attachment Tape https://www.amazon.com/dp/B00JR4D7AA/ref=cm_sw_r_cp_api_i_DMFsDbBYZS2PN

http://www.amazon.com/gp/aw/d/B0054RW1HE?pc_redir=1405968334&robot_redir=1

I have these, I like them pretty well. Adjustment can be a pain by yourself, but other than that...

I cleaned off the old adhesive and used new adhesive tape. 3M (38583) 1/4" x 15' Exterior Attachment Tape https://www.amazon.com/dp/B00JR4D7AA/ref=cm_sw_r_cp_api_wieGybYH9WV6Y

Thanks! Here's what I used:

Trimbrite T1118 1/8 Pinstripe Tape Red https://www.amazon.com/dp/B00029XB1Y/ref=cm_sw_r_cp_api_cjtIxbZ3CV402

The corners might not look perfect up close but it works for me!

is it the looks or layout or the alcantara? An alternative would be to get the thrustmaster addon wheel, screw it off and put it on the universal hub. Its lighter than the other two as well.

PS: looking at the price of the hub, it might not be very economical. I thought the uni hub was cheaper

PPS: seems the bolt pattern is different anyway, so nevermind xd

Hey man! I've been eyeing one on Amazon, you can get the color matched to your car (like a Hellcat) or matte (like a scatty)

https://www.amazon.com/Charger-Factory-Hellcat-Spoiler-Painted/dp/B00ZFTGD8Y/ref=sr_1_1?ie=UTF8&qid=1474663577&sr=8-1&keywords=hellcat+spoiler

Specifically either of these should work fine:

http://www.amazon.com/3M-38583-Exterior-Attachment-Tape/dp/B00JR4D7AA/

http://www.amazon.com/3M-03614-Scotch-Mount-Molding-Tape/dp/B002JOVUO0/

Walmart usually carries both and any auto parts store too.

If I remember correctly I just bought red pinstripe tape off amazon.

EDIT: This, http://www.amazon.com/Trimbrite-T1118-Pinstripe-Tape-Red/dp/B00029XB1Y/ref=sr_1_2?ie=UTF8&qid=1405101727&sr=8-2&keywords=pinstripe+tape

$17 Amazon special.

I noticed this one is lifting a bit on the inside, I may need to redo them.

Here!

https://www.amazon.com/Motorcycle-Reflective-Scotchlite-ME-RK-99/dp/B00CEKUO1O

Here's also a list of the mods, how much, and where I got them.


Visual

Black rims $192.25x4 = $769
Window tint $180
Spoiler $100
Side Stripes $30

Tail light blackout $20

Sidemarker $15

Rear Decal: $50

345/Hemi Emblems black $34

Plasti-dip for Decals $6.00

Rock Guard $60

Engine

Air Filter+Recharge $63

Oil Catch Can $150

Other

Tazer+Bypass $300
Atturo Az850 275/40R20 $127.55x4 = $510

Mid-Muffler Delete $163

Yup, u/TreeFiddyZ is right on the money. Order a few for the future, here are the ones that work for me:

https://www.amazon.com/gp/product/B0093RRSXS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

https://www.amazon.com/Fit-System-C0400-Passenger-Adjustable/dp/B001DKT0DO/ref=sr_1_4?keywords=car+mirror+blind+spot&qid=1566336327&s=gateway&sr=8-4

[this may help]
(https://www.amazon.com/Nissan-Universal-Fender-Retainers-Diameter/dp/B0093RRSXS)

I bought this similar product:
BASENOR Tesla Model 3 Center Console Organizer Tray Accessoies with J1772 Charging Adapter Holder, Coin and Sunglass Holder for Tesla Model 3 https://www.amazon.com/dp/B07P2WT6B4/ref=cm_sw_r_cp_api_i_LL2sDbDEDASMJ

First Google result

Also Amazon

It's still up here:
https://www.amazon.fr/ThrustMaster-Volant-Licence-Officielle-Turismo/dp/B01HRYFODO/ref=sr_1_3?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=UC4295SBSNLA&keywords=thrustmaster+t300rs&qid=1574988617&sprefix=thrustmaster+%2Caps%2C143&sr=8-3

and here:

https://www.cdiscount.com/informatique/gaming/thrustmaster-volant-pour-jeux-video-t300rs-gt-edit/f-107140306-3362934110420.html#mpos=0|cd

https://www.amazon.com/Custom-Console-Liner-Acessories-Subaru/dp/B07MZ9TCYP/ref=mp_s_a_1_1_sspa?keywords=wrx+2019+cup+holder+mats&qid=1574810187&replacementKeywords=cup+holder+mats&sr=8-1-spons&vehicle=2019-13-22928------------&vehicleName=2019+Subaru+WRX&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyT0tTVTJJVVVaNzlKJmVuY3J5cHRlZElkPUEwNDMzNjI1MlJVV0hXQ1hDVEpLSCZlbmNyeXB0ZWRBZElkPUEwNjg2NDgwNVdPWUtHVkNDWE0xJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Edit: sorry for the long ass link but here ya go

The wind noise and the reverse camera delay are my two biggest complaints. Reverse camera delay is software related so that will likely get fixed in the coming months.

I have purchased both this basenor wind reduction kit and this wind guard which seem to help a little but I think most of the noise is coming through the front windshield somehow.

How are you guys setting up the wheel? I tried using an f1 wheel at 270 Degrees and just couldn't make it work. I picked up an Alcantara specifically for Dirt rally what degree are most of you using?.

3M. Do NOT use super glue!!!

This tape will work too. Also available in 1/2 inch. Follow the instructions to the letter.

Us poor people use a stick on mirror.

http://www.amazon.com/Fit-System-C0400-Passenger-Adjustable/dp/B001DKT0DO/ref=sr_1_12?s=automotive&ie=UTF8&qid=1458143029&sr=1-12&keywords=rear+view+mirror

Its the Alcantara Edition: I was a little hesitant because i read that it would leave your hands black from the die. I have not experienced this at all, and the wheel shows no signs of wear. I've been very happy with it, so much better than the cheap plastic wheel it game with.

https://www.amazon.com/Thrustmaster-F599XX-Wheel-Alcantara-playstation-4/dp/B014US048A/ref=sr_1_1?gclid=Cj0KCQjwzozsBRCNARIsAEM9kBPfpIKQ4d7yPeCQ0oKep1Ia_la9q_euzK2mnrKYItDsCIqLEDYGi-caAp42EALw_wcB&hvadid=322228700118&hvdev=c&hvlocphy=9005590&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=10894263770818631868&hvtargid=kwd-360879124490&hydadcr=5736_9183883&keywords=thrustmaster%2B599%2Bwheel&qid=1568911573&s=gateway&sr=8-1&th=1

I'd advise against using those screws since they are there specifically to tension the cooler against the GPU itself. Overtightening them could cause the silicon GPU die to chip or fracture.

Many people making acrylic backplates simply use a two-sided adhesive tape to stick it on. You only need to keep it from sliding off, it doesn't need much. The Automotive 3m tape works especially well.

https://www.amazon.com/dp/B00JR4D7AA