Reddit mentions: The best automotive trim
We found 569 Reddit comments discussing the best automotive trim. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 269 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Trimbrite T1218 Trim Stripe Red 1/4 Tape
- Lifetime Warranty
- High-quality vinyl and adhesives
- Customize the look of any vehicle
- Easy to apply around curves and contour surfaces
Features:
Specs:
Height | 0.3 Inches |
Length | 4.5 Inches |
Width | 3.7 Inches |
2. Fit System RM011 Clip-on Wide Angle Rear View Mirror
- Package Weight: 0.36 Kg
- Product Type: Vehicle Mirror
- Package Quantity: 1
- Package Dimensions: 4.4Cm (L) X 10.2Cm (W) X 49.4Cm (H)
- 18 inch Wide Angle Mirror
Features:
Specs:
Color | Regular |
Height | 2.2 Inches |
Length | 19.9 Inches |
Weight | 0.84 Pounds |
Width | 5.7 Inches |
3. Vehicle OCD - Center Console Organizer Compatible with Toyota Tacoma (2016-2020) - Made in USA
- ORGANIZE YOUR RIDE with American made Vehicle OCD brand products. Designed and engineered for the perfect fit. Salex Organizers part no. SLX113
- Molded ABS 1/8" thick black plastic with matte finish. No tools required. Interlocking plastic dividers provide organization to center console space. The pieces match fit the inside shape of the center console exactly to make a tight fit and not rattle
- NOTE: Organizer must be assembled inside the Tacoma center console, piece by piece. Insert long piece first at a diagonal, then rotate into position at the bottom of the console. Next, add two short pieces. Each part marked with arrows for proper orientation
- Vehicle OCD products for Toyota Tacoma (2016-2022) also include: center console organizer full tray, part no. SLX126, center console organizer half tray, part no. SLX133, and glove box organizer, part no. SLX144. All products can be used together or independently
- Fits 2016-2022 Toyota Tacoma trucks including SR, SR5, TRD Sport, TRD Off-Road, Limited, TRD PRO
Features:
Specs:
Color | black |
Height | 5.25 Inches |
Length | 8 Inches |
Weight | 0.5 Pounds |
Width | 7.5 Inches |
4. EV Wraps Tesla Model 3 / Model Y Center Console Wrap - Matte Deep Black
INSTALLATION PROTECTION* comes with every order so you can install with confidenceSpecially design each piece for faster installation time, better result, and less prone to mistakesFaster and easier install compared to other center console kits in the marketNo need to use razor blade to trim off ext...
Specs:
Color | Black |
Size | Gen 1.0 |
5. Allstar Performance ALL14275 Clear 2" x 30' Surface Guard Tape
Add protection to surfaces that are prone to scratching or chippingVirtually invisibleCrystal clear polyurethane film will not yellowFor best results apply at temperatures between 50F-80F2" wide x 30' long roll
Specs:
Height | 40.8 Inches |
Length | 67.2 Inches |
Width | 61.2 Inches |
Size | 2" X 30' |
Number of items | 1 |
6. 3M Super Strength Molding Tape, 03615, 7/8 in x 5 ft
Cut to size, no mess
Specs:
Color | Factory |
Height | 4 Inches |
Length | 6 Inches |
Weight | 0.0881849048 Pounds |
Width | 1 Inches |
Release date | October 2011 |
Size | 7/8 in. x 5 ft. |
Number of items | 1 |
7. Woodstock D4151 110/220-Volt Paddle Switch
- Rated for 2 horsepower motors; 110-Volt; Up to 35-Amp
- Also rated for 3 horsepower motors; 220-Volt; Up to 20-Amp
- Large paddle is perfect for emergency shut offs
- Padlock shaft size: 3/16"
Features:
Specs:
Weight | 0.35 Pounds |
Number of items | 1 |
8. BASENOR Tesla Model 3 Model Y Model S Door Seal Kit Soundproof Rubber Weather Draft Seal Strip Wind Noise Reduction Kit
- (Patent Design) Custom-designed: The Car Door Rubber Seal Strip has been custom-cut specifically for model 3. Drastically reduce wind noise from entering the cabin along with other outside noises. Fit all 2016 2017 2018 2019 2020 2021 2022 Tesla Model 3.
- Premium Material: Made from EPDM expandable hollowed sponge rubber . Flexible, waterproof and good resistance to heat & cold. Has a sealing, lower voices, the role of dust.
- Easy to install: Clean your tesla door edge. Wiped adhesion promoter on surface. Pull off the sticker red protective backing of the seal. Hard press to ensure the it can be installed firmly.
- Reduce Noise: Enhance the tightness of the door, Sound insulation and noise reduction, optimizing engine compartment cooling airflow, Improve the cooling effect of the air conditioner in the cab, reducing driving wind noise.and provide a quiet driving environment.
- Essential Accessories: Package with 8 custom-cut seal strip. Including the front/rear door, Front Pillar(A Pillar) and Center Pillar(B Pillar). A must have for all Tesla Model 3 and Tesal Model S owners! Make your car more sealed.
Features:
Specs:
Color | Black |
Height | 3.93700787 Inches |
Length | 3.93700787 Inches |
Width | 3.93700787 Inches |
Size | Model 3 |
Number of items | 1 |
9. Catch Caddy 100-CC-MC24 Car Seat Catcher, Organizer
Seat pocket catcher designed to catch items before they dropStop distractions, create storage, and keep items within easy reachInstalls in seconds: simply slide car seat catcher between the seat and console and its flexible, one-size-fits-most design fills that empty spaceStops drops: catches everyt...
Specs:
Height | 3.1 Inches |
Length | 14.7 Inches |
Weight | 0.95 Pounds |
Width | 5.1 Inches |
10. JessicaAlba Fuse Box Coin Container Inner Storage Tray for Subaru XV/Crosstrek Forester Outback Legacy Impreza WRX STI
High quality black ABS plasticFitment for LHD models only: 2013-2018 Subaru XV/Crosstrek / 2013-2018 Subaru Forester / 2010-2014 Subaru Outback (Not Fit 2015 onwards) / 2010-2014 Subaru Legacy / 2012-2016 Subaru Impreza (Gj, GP Series, previous shape only) / 2015-2018 Subaru WRX STIHelp to Organize ...
Specs:
Weight | 0.000625 Pounds |
11. BASENOR Tesla Model 3 Center Console Organizer Tray Accessoies with J1772 Charging Adapter Holder, Coin and Sunglass Holder for Tesla Model 3
Custom-designed:?The Center console tray has been custom-cut specifically for model 3. Fit all Tesla Model 3 VehiclesStrong Material: Made from durable black ABS plastic.Sturdy and durable than instead of 3D PrintingNon-slip Design: The bottoms of the compartments are lined with a non-slip rubber wh...
12. Broadway BW846 300 Millimeter Napolex Mirror
- Black trim and flat wide style
- Clips onto existing mirror; 300F(300 millimeter Flat)
- 300 millimeter x 65 millimeter
- Reduces blind spots and glare
- Attachable mirror height 55-80 millimeter
Features:
Specs:
Color | multi-colored |
Height | 2.91338 Inches |
Length | 0.98425 Inches |
Weight | 0.40565056208 Pounds |
Width | 12.12596 Inches |
Size | 300 Millimeter |
Number of items | 1 |
13. CupHolderHero Compatible with Subaru WRX Accessories 2015-2021 Interior Non-Slip Anti Dust Cup Holder Inserts, Center Console Liner Mats, Door Pocket 13-pc Set (Manual Parking Brake) (Red Trim)
✅NEW CAR LUXURY THAT LASTS - Our custom car interior liners for WRX and cup holder mats are engineered in the USA with a unique design that offers a precise fit you won't find elsewhere, perfectly placed tab handles for easy removal, a sleek mods look without logo designs that gather grime, and a ...
Specs:
Color | Red Trim |
Weight | 0.3125 Pounds |
Size | WRX WITH MANUAL PARKING BRAKE |
14. Trimbrite T1118 1/8 Pinstripe Tape Red
Lifetime WarrantyHigh-quality vinyl and adhesivesCustomize the look of any vehicleEasy to apply around curves and contour surfaces
Specs:
Color | Regular |
Height | 0.2 Inches |
Length | 4.5 Inches |
Weight | 0.05 Pounds |
Width | 4.3 Inches |
Number of items | 1 |
15. JDMCAR Compatible with Tacoma 2016-2019 2020 Center Console Organizer Insert ABS Black Materials Tray, Armrest Box Secondary Storage
【CHECK FIRST】 Front floor console organizer fits for toyota tacoma 2016 2017 2018 2019, including SR, SR5, TRD Sport, TRD Off-Road,Limited and TRD Pro. Maximize the storage in your Toyota Tacoma center console, Keep your armrest storage in a more organized shape.【GOOD HABITS】Use Center Conso...
Specs:
Color | black |
Height | 7.6 Inches |
Length | 7.8 Inches |
Weight | 0.4625 Pounds |
Width | 1.8 Inches |
Size | For Tacoma 2016-2019 |
Number of items | 0 |
16. 3M Exterior Attachment Tape, Ideal for Moldings, Emblems and Trim, 1/4 in width x 5 yards in length, 1 roll
- Ideal for attaching moldings, emblems and trim to exterior painted automotive surfaces
- For industrial/occupational use only. Not for consumer sale or use.
Features:
Specs:
Height | 0.8 Inches |
Length | 6.7 Inches |
Weight | 0.0881849048 pounds |
Width | 4.85 Inches |
Release date | April 2014 |
Size | 1/4" w x 5 yards |
Number of items | 1 |
17. Motorcycle Black Reflective Tape 3M Scotchlite DYI Kit ME RK-99
- This is an uncut DYI kit for you to make your own designs
- Reflective Vinyl Tape Kits use 3M Scotchlite
- Uses 3M's finest engineer-grade, 7-mil, 7-year spec, BLACK reflective tape
- Great for Side bags, Top cases, Helmets and more
- Each kit comes complete with installation instructions
Features:
Specs:
Color | Black |
Height | 0.2 Inches |
Length | 11 Inches |
Weight | 0.0625 Pounds |
Width | 9 Inches |
18. 3M 6654 Yellow 36 mm x 55 m 06654 Automotive Refinish Masking Tape-36 mm
- DELIVERS SHARP PAINT LINES: Adhesive resists lifting and curling, prevents bleed through, helping to maintain sharp paint lines
- HUGS AUTO CURVES AND CONTOURS: Flexible, conformable backing resists breaking for faster and more consistent masking
- LEAVES NO RESIDUE, NO DAMAGE: Quick and easy removal, helping reduce scraping and scrubbing of residue
- USE INDOORS AND OUTDOORS: UV and light resistant
- SUPER STRONG: Excellent tape strength end-to-end, resists breaking
- USE ON A VARIETY OF SURFACES: Delivers consistently superior performance on moldings, plastic, glass, metal, rubber and paint.
- EASY TO UNWIND AND REMOVE: Special 3M backing provides for superior control during unwinding, making it less likely the tape wrinkles or pulls away.
- WORKS WITH DIFFERENT PAINT SYSTEMS: Compatible with water or solvent based paint systems.
- WORKS IN DIFFERENT CONDITIONS: Tape also resists temperatures up to 250°F (121°C) for up to 30 minutes, making it suitable for longer baking cycles.
- SAVE TIME AND MONEY: Tape and roll design affords more usable tape per roll vs. lower-priced brands
Features:
Specs:
Color | Green |
Height | 1.42 Inches |
Length | 4.25 Inches |
Weight | 0.35 Pounds |
Width | 4.25 Inches |
Release date | October 2011 |
Size | 36 mm x 32 m |
Number of items | 1 |
19. EV Wraps Tesla Model 3 / Model Y Center Console Wrap - Carbon Fiber
INSTALLATION PROTECTION* comes with every order so you can install with confidenceSpecially design each piece for faster installation time, better result, and less prone to mistakesFaster and easier install compared to other center console kits in the marketNo need to use razor blade to trim off ext...
Specs:
Size | Gen 1.0 |
20. Broadway BW849 360mm Type-A Convex Mirror
Black trim and convex wide styleClips onto existing mirror; 360R(360 millimeter Convex)360 millimeterReduces blind spots and glareAttachable mirror height 55-80 millimeter
Specs:
Color | silver |
Height | 2.91338 Inches |
Length | 0.98425 Inches |
Weight | 0.46958461806 Pounds |
Width | 14.37005 Inches |
Size | 360 Millimeter |
Number of items | 1 |
🎓 Reddit experts on automotive trim
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive trim are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Really, the only thing I recommend you have on hand at the delivery is the screen protector. I bought this one and have been happy with it.
You probably also want to have some sort of USB storage device for your dashcam/sentry mode. This could be a USB thumbdrive, SSD, Harddrive, or SD card (with adapter). As long as it has a decent amount of memory and a decent read/write speed and is USB. You'll need to format it FAT32 for the car to recognize it.
As for other accessories, most people on here choose to wrap their center consoles. It comes with a piano black finish which looks really nice but scratches and shows fingerprints really easily. I suggest the Kenriko center console wraps. They have tons of colors/finishes from matte black to white, to carbon fiber.
After that it is up to you. There are TONs of products that you can use to modify your Model 3. Personal favorites of mine so far are the extra door seals that keep out dirt and slightly reduce wind noise. The aluminum pedals are a really nice touch if you don't have a performance model. All-weather floor mats are really nice. I have the 3D MaxSpider ones but I've heard really good things about the Tuxmats. The wireless chargers for your phone are a good accessory as well.
Common upgrades:
EDIT: formatting
Oh yeah the sound system is great in these cars Fender did a good job. Yep just like the GTI badge. I was really glad to see they added that and the red lipstick to the new models. Finally showing the GLI a little love, now if we could just get a sport model like the GTI. If you were interested in adding the lipstick I did it myself on my 13 with just some red vinyl racing stripe tape like this. Here's a pic of how it came out sorry it's a little dark but the best I could find.
https://www.tacomaworld.com/threads/rust-on-frame-with-a-c-drain-mod-fix.444138/#post-12942289
Do this as soon as you can. The a.c. puts out a lot of water, so keeping it off the frame to avoid rusting for a few dollars is something everyone should do.
Toyota Tacoma Center Console Organizer (2016 - Present) https://www.amazon.com/dp/B016ZB4VZC/ref=cm_sw_r_cp_apap_yMJH8ohGfbLuX just got this in an it's already such a useful addition.
Husky makes a great pair of floor liners (not just floor mats) really keeps your floors in perfect condition.
Other add ons include in channel window deflectors if they interest you, and a bed mat.
I've had mine since 8/30 and love it. Over 550 miles on it already lol. Done the first three already. Will be holding off for a while on other changes.
Get a Euro switch, allows you more options for running lights and headlights and is superior. Easy to install, too.
I have one of these and I love it, combined with blindspot mirrors on your outside rear views, it makes for a much safer driving experience. And looks neat.
And yeah, vinyl wrapping the brushed aluminum.
Total cost: $31.70
Time: ~30 minutes.
Tools required: Hand drill
Now that it gets dark so damn early, I've been using my headlights a lot more, and I noticed that they weren't as bright as they used to be. So, on the advice of a coworker, I picked up THIS headlight restoration kit from amazon, as well as THIS sealer and THIS masking tape (to protect the paint around the lens). The directions were clear and concise and the whole process took about 30 minutes and was extremely easy. It comes with an attachment for your hand drill to which a variety of sanding/buffing discs mount. You start with a coarse grit sandpaper disc to remove the oxidation and then you use progressively finer grit discs to smooth out the surface. Finally you buff and seal the lens.
I couldn't be happier with the results. The lenses look brand new and there are enough sanding discs left over to do at least one or two more cars.
My tips would be to try driving a smaller or a more compact car. I find they have a better turning radius, thus are much easier to parallel park, getting into tight corners, navigating through tight spaces, etc. Also try replacing your rear view mirror with a wider one like one of these: Fit System RM011 Clip-on Wide Angle Rear View Mirror https://www.amazon.com/dp/B001A0J2JO/ref=cm_sw_r_awd_hYf-wbBME5VY5
I use this particular 18 inch mirror that just clips on to your existing mirror. This gives you a much bigger field of vision of what's behind you when your driving, and you can see your blindspots and everything! It just feels much more safer, thus making you feel more confident when driving..
Having a backup camera can help you alot too. I mainly use mine for parallel parking because it's sometimes hard to judge the distance between the back of my car and the front of the car behind me.
You can also try investing in brighter LED headlights for your car if you don't have them already. Or turn on your fog lights as well. I know, driving at night can be dangerous especially when it's hard to read the road signs or see the street lines, especially if your not familiar with the roads. Just remember, if its really hard to see at night and there are no cars around you, feel free to use your high beams! That's what they are there for. Just make sure you don't have them on if there is a car coming in front of you because you can seriously blind the hell out of them lol. I deliver food as part of my job so I am always driving and exploring new areas, driving at night is always much harder..
You can always go the ghetto route and use an old tube, but I'd recommend clear helicopter tape. Don't bother with bike specific tape, it's a huge ripoff. Buy this: http://smile.amazon.com/dp/B003BZO05C
This is what I use for all my bikes and it works really well. A 30 ft. roll is plenty to protect multiple bikes; you won't be fucked if you mess up because you'll probably have another 25 ft. of tape left. Also, buy a small squeegee and a spray bottle if you don't have these already. It will make applying the tape a breeze.
Hey! Just picked up my Model 3 this week and I've purchased the following, all of which I highly recommend:
Yes, great trick.
ProTip: Heat up sticky with lighter WITH red covering on, then peel it off and stick to clean surfaces. This prevents all the black chemicals from being on the avtual adhesive which could diminish the effectiveness. Also dont overheat it.
If doing on cars with decals, or nice paint jobs use some helicopter tape between sticky and surface. But its pricey. https://www.amazon.com/Allstar-Performance-ALL14275-Clear-Surface/dp/B003BZO05C?ref_=fsclp_pl_dp_1
I dont use it on my shoei 600$ helmet but have on many cars with decals and vinyl logos and such.
Good luck.
I have speakers that are not quite that big, but still large, taped to my toolbox at work. I use the 3M Automotive Tape since we have tons of it on hand. It's double-sided foam tape and it's super sticky. Also how I had my license plate mounted to my car for a while there.
They've held up so far, and I'm sure in a climate controlled bedroom, the tape would last much longer. I wouldn't worry about them falling off, unless you had massive home theater speakers on there...
3M auto tape has a double back adhesive and is pretty resilient to most operating temperatures. Best to apply on a clean surface during a warm day or blow dry it in place.
Hey, glad you liked it. I used this. Was super cheap and very easy to put in place. You'll need a steady hand and some patience but overall it's not too hard. If you check my other submissions here, you'll see I did the front bumper, side fender badges, and mirrors with this same tape. Just take your time, use wax / grease remover, and clean the area with isopropyl alcohol before laying it down.
I love those cup holders and have the same ones. Definitely worth getting! Here is the link to those if anyone is interested:
​
https://www.amazon.com/gp/product/B07MZ9TCYP/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I decided to go with the EV wraps console wrap due it having a clear support backing around the cup holders. Installation was a breeze. Quality seems great as well.
EV Wraps Tesla Model 3 Center Console Wrap - Carbon Fiber https://www.amazon.com/dp/B07F5T2NM8/ref=cm_sw_r_cp_api_i_xHluDbA3RBAXR
Well...here's all the stuff I bought on my Amazon list lately. Does that help?
AUKEY 1080p Dash Cam
https://smile.amazon.com/gp/product/B072FGL63X/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Black Off Road Scene Easy Fit Mud Guard
https://smile.amazon.com/gp/product/B0002NIJS0/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Car Travel Inflatable Mattress
https://smile.amazon.com/gp/product/B01N7MZ3YO/ref=oh_aui_detailpage_o07_s02?ie=UTF8&psc=1
Xprite Amber 240 LED Roof Top Mini Flashing Strobe Light
https://smile.amazon.com/gp/product/B0091XUAY8/ref=oh_aui_detailpage_o07_s02?ie=UTF8&psc=1
Smoke Tint Slim Wind Deflector
https://smile.amazon.com/gp/product/B00335FH4S/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
Pet Dog Seat Belt Leash
https://smile.amazon.com/gp/product/B0719R1YNZ/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
30 Ft. Polyester Tow Strap
https://smile.amazon.com/gp/product/B00L5RMPT6/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Hood tie-Down Loops
https://smile.amazon.com/gp/product/B01CRBXQUK/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Seat Cover for Pets
https://smile.amazon.com/gp/product/B00QHC02EY/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Silicone Wedding Ring For Men (For the radio knobs)
https://smile.amazon.com/gp/product/B06WD31K4P/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Toyota Tacoma Center Console Tray
https://smile.amazon.com/gp/product/B01KI3WG1O/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Toyota Tacoma Center Console Organizer
https://smile.amazon.com/gp/product/B016ZB4VZC/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Front Car Seat Covers
https://smile.amazon.com/gp/product/B01FBLOR88/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Husky Liners Front Floor Liners
https://smile.amazon.com/gp/product/B019YS22MM/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Annnnnnnnnnd I'm just now seeing you were talking about the 2nd Gen...
I beg to differ... for $30 this is one of the cheapest mods I have done and was very quick and easy to install. Forget about noise dampening for a moment. The doors sound much more solid during close and give a nice sort of pop when opening. Door sill will stay nice and clean. I bought this kit during a sale: https://smile.amazon.com/dp/B07R13DYYY/ref=cm_sw_r_cp_apa_i_3K5hDbEZK2Q8X
Go to Amazon and order this (I like Meg's products),
This should run you about $345 for everything and have you setup to take care of your car for a long time. You can find a 20% discount code online for harbor freight to bring the price down $55 for the DA. Go to home depot and buy a couple buckets and you will be good to go.
Edit: To add, I went to Lowes and bought a cheap inline sprayer for my hose and it works fine for foaming up the vehicle, plus it only costs $5.
Edit2: If you are going to downvote me please post why you don't like my recommendation.
Here's a link, you can get it in pretty much any width you want, so look at something like a ruler to get an idea of what you'd like. I would also make sure you have a sharp razor/cutting implement to give a clean cut end.
Pin Stripe Tape
I used these.
https://www.amazon.com/gp/product/B00CEKUO1O/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
My BIL is super good at drawing/tracing stuff and he loved the idea. I bribed him to do it and he spent the morning cutting, test-fitting, and applying them.
I like this one even better:
https://smile.amazon.com/gp/product/B07P2WT6B4
Has a slot that perfectly fits the J1772 adapter.
First of all, nice job swapping IRS in to your '96
> I've had my Mustang long enough to see it go from "Oh my god, I can't see out of this thing!" to "Oh my god, it's so open and airy in here!"
I felt the same way initially with my Mustang, but then I installed this wide mirror. Works wonders on rearview visibility (just make sure to strengthen your rearview mirror's balljoint - it's a heavy mirror):
https://www.amazon.com/gp/product/B001A0J2JO/ref=oh_aui_detailpage_o07_s02?ie=UTF8&psc=1
If you’re using the j1772 frequently, this center console organizer is great and fits the included adapter perfectly: https://www.amazon.com/dp/B07P2WT6B4?ref=ppx_pop_mob_ap_share. The coin holder part is removable.
Hmm interesting concept. I could probably achieve something similar via different means.
For me I used hockey tape (nice matte black fabric like tape) and taped my Razer Firefly wire to itself, and ran it and my mouse cable (with some slack for movement) under my keyboard, then taped all 3 together and ran it to the back of my desk under my sound bar so it "looks" like only a single large cable going to the back of the desk.
Underneath I have a surge protector and a usb hub stuck with double-sided 3M automotive adhesive (I use this stuff for everything). and then these in expensive adhesive J-channel cable race for wires.
I also got rid of my center support leg in exchange for a heavy duty shelf bracket.
https://imgur.com/a/XZpd7f2
https://www.amazon.com/3M-03615-Scotch-Mount-Molding-Tape/dp/B000BO9L00/ref=sr_1_2?crid=2K2C6TAK8T4QQ&keywords=3m+automotive+double+sided+tape&qid=1568764442&sprefix=3m+auto%2Caps%2C157&sr=8-2
https://www.amazon.com/Channel-Cable-Raceway-Black-Length/dp/B002DNM42O/ref=sr_1_2?keywords=j+channel+wire&qid=1568764412&sr=8-2
Ah well there you go! I would think even if you had the legal colors it would make you more of a target for cops though. I personally like the stealth route since uh, yeah I am probably always speeding a bit.
If you want increase visibility, they make reflective tape that you can add to the back of your helmet, jacket, bike, etc.. Comes in black so if you have a black helmet it just blends in. I noticed that once I added a few big pieces to the back/sides of my helmet cars hung way further back from me at night.
Edit: this is the stuff I have:
https://www.amazon.com/Motorcycle-Reflective-Scotchlite-ME-RK-99/dp/B00CEKUO1O
I like the dmm from taco garage. It’s sleek and not crazy expensive plus it puts my phone in the perfect spot.
Also this organizer for the center console. . Totally worth the $20 or so dollar for the insert and the dividers.
JessicaAlba Fuse Box Coin Container Inner Storage Tray for Subaru XV/Crosstrek Forester Outback Legacy Impreza WRX STI https://www.amazon.com/dp/B074GR9P9Q/ref=cm_sw_r_cp_api_an81BbD8M93R7
Got it a few weeks ago, pretty great
> The center console on the 3 is shiny and weird. It definitely can scratch easily as people have mentioned. I need to get that wrapped as well.
I used this product. It went on easier than I expected.
Yeah, thanks for confirming. I've heard that before... I have a friend who has never shut his down (for many years). I guess they're made to run all the time. I planned on putting one of these on the right side of my lathe mounted to the lathe itself: https://www.amazon.com/gp/product/B005W17FRS/ref=s9u_simh_gw_i1
https://www.amazon.com/gp/product/B07R13DYYY/
Two of the bags had the names swapped. So that was fun. But they come with a qr code for each step which links to a youtube video. 1st step took 20 min. The rest was done in 10. So 30 min to figure it out and install. Mine might just be better then the rest. I don't know. Just sick of seeing the.
This mirror is excellent, and it takes 30 seconds to install. Unless there's some crazy feature you actually want out of that OEM mirror, the Broadview will be better.
Just make sure you measure the distance between your visors and pick a length that will fit between them, otherwise you won't be able to lower the visors.
Thank you! I often stare at that ass also when I walk away
I love the eyesight, it's something I didn't think I would need, but after having it, I can't live without it. I use it frequently on the freeway. Only caution I would throw in is if you know there's traffic, don't rely on eyesight's breaking, because it sometimes catches completely stopped traffic a tad late, and breaks really hard. When it accelerates, it tends to accelerate pretty hard too.
I typically throw on the adaptive cruise control and lane guard and cruise on the freeway.
I bought this tape for the red trims.
https://www.amazon.com/gp/product/B00029XBBE/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I taped it along the grooves in the back, turned out better than I expected!
Trimbrite T1118 1/8 Pinstripe Tape Red https://www.amazon.ca/dp/B00029XB1Y/ref=cm_sw_r_cp_api_o8M0BbA9GEJ5B
With patience and a steady hand, it can turn out amazing.
Alternatively, you can get something like this. For me, it covers my blindspots perfectly:
http://www.amazon.com/Broadway-BW849-Type-A-Convex-Mirror/dp/B0040E1HJA/ref=sr_1_3?ie=UTF8&qid=1397021065&sr=8-3&keywords=broadway+mirror+convex
I don't remember if it's a 360mm or a 400mm, but it's a convex Broadway mirror that I bought from Super Autobacs a few years ago. I found a vendor on Amazon for ya!
I was concerned about that too since I love listening to music and appreciate the quiet cabin. It’s a bit louder than the aeros but I haven’t found it to be annoying. I also bought this kit to get back some of the quiet and it made a little difference but still not as quiet as the aeros:
https://www.amazon.com/BASENOR-Soundproof-Rubber-Weather-Reduction/dp/B07R13DYYY/ref=gwm_tlc_pi?pf_rd_s=blackjack-personal-1&pf_rd_t=Gateway&pf_rd_i=mobile&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=VEKTZVMWME85X2TEAQ0W&pf_rd_p=1dfcfc84-3ad7-4be1-8cf4-d1dd1de5a0dc&pd_rd_i=B07R13DYYY
It’s very dependent on the road. If you do 85 miles an hour (typical Bay Area fast lane), and the road isn’t great it will be noticeable.
I totally agree with you on the storage, I went this route (Catch Caddy 100-CC-MC24 Car Seat Catcher, Organizer https://www.amazon.com/dp/B0182QDLFE/ref=cm_sw_r_cp_apa_ilkxyb2S8TQME) on my 16 First with Recaros. Seems to work pretty well for phone and other small items, and keeping junk from falling down into the void. You can only really use the front portion however.
Not sure if yours came with them but any kind of weather tech or husky floor mats are a lifesaver! Also for center console organizer I got the vehicle OCD organizer.
https://www.amazon.com/Vehicle-OCD-Console-Organizer-2016-2019/dp/B016ZB4VZC/ref=mp_s_a_1_1_sspa?keywords=tacoma+vehicle+ocd&qid=1570796409&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzNTJIRkZMSEI1RzA5JmVuY3J5cHRlZElkPUEwMTc5MDg1MVhKTEtHOVRZWjJSMiZlbmNyeXB0ZWRBZElkPUExMDMzODk4MVVLR0tBQkhEWUhYUiZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
If you want an easy way to increase your situational awareness, spend $9 on a clip-on wide-angle mirror.
If you want to be more hardcore, spend $19 on a 5-panel mirror, which doesn't distort distances.
This is the one I got, pretty easy to find using some search words:
https://www.amazon.com/dp/B074GR9P9Q/
I have these. They work nice and are pretty cheap. https://www.amazon.com/dp/B0182QDLFE/ref=cm_sw_r_cp_apa_phY4xbHVSYCM8
I bought this little thing off of Amazon for my 2016. It works fantastic for my coin needs! https://smile.amazon.com/gp/product/B074GR9P9Q/ref=oh_aui_detailpage_o08_s01?ie=UTF8&psc=1
Got bored earlier today and was looking for the same thing. Found these liners on Amazon (https://www.amazon.com/Custom-Console-Liner-Acessories-Subaru/dp/B07MZ9TCYP) and they are pretty cheap and get good reviews. I ordered the red to match the stitching so it'll add a little color to the interior.
Mine was messed up when I purchased my unisaw. I'm pretty elecricaly savvy, and after looking into all the parts I needed, contactors, relays, flux capacitors, etc. I just canned it in favor of one of these
Simple, cheap and it works well. You just have to remember, if the power goes out, don't sit on the blade until the power comes back on--or just hit the off switch.
Order the tray and the organizer at the same time and save 20%. I have both, worth every penny!
I got this one because it had a cutout for the J1772 charging adapter, which I use a lot to charge at home on my JuiceBox. Love it so far.
BASENOR Tesla Model 3 Center Console Organizer Tray Accessoies with J1772 Charging Adapter Holder, Coin and Sunglass Holder for Tesla Model 3
I just use this for my change in the center console. Works great for me.
Holding up great. Trimbrite T1218 Trim Stripe Red 1/4 Tape https://www.amazon.com/dp/B00029XBBE/ref=cm_sw_r_cp_apa_i_CjGUDbTKJEJ2X
This rally-style mirror is too awesome to not use
I just bought this one and did it myself actually. Any good generic 3M-type stripe tape should work well.
http://www.amazon.com/Trimbrite-T1218-Trim-Stripe-Tape/dp/B00029XBBE/ref=sr_1_1?ie=UTF8&qid=1453491270&sr=8-1&keywords=trimbrite+red+pinstripe
I bought these to help with noise and keep the cabin temp stable.
BASENOR Tesla Model 3 Door Seal Kit Soundproof Rubber Weather Draft Seal Strip Wind Noise Reduction Kit https://www.amazon.com/dp/B07R13DYYY/ref=cm_sw_r_cp_api_i_zHESDbSFEYHJB
Buy a panoramic mirror and clip it on.
Here's a 11.75-inch version.
Here's the 17.75 inch version.
They'll take some getting used to, but once you do, you can see infinitely more behind you and to your left and right. I credit these mirrors with saving my life more than 10 actual times in all weather conditions. I won't drive any car without one now.
I can be your hero baby.
https://www.amazon.com/Catch-Caddy-100-CC-MC24-Catcher-Organizer/dp/B0182QDLFE
I used this:
1/4" 3M Vinyl Striping 150' 25 Colors Available (Tomato Red) https://www.amazon.com/dp/B00HQN3W40/ref=cm_sw_r_cp_apa_i_9QkJDbZ97CZ7J
Although the red shade is a bit lighter than the red GTI strip.
I've seen some people recommend this one as well in the mk7owners forum:
Trimbrite T1218 Trim Stripe Red 1/4 Tape https://www.amazon.com/dp/B00029XBBE/ref=cm_sw_r_cp_apa_i_2RkJDbW95FJ4X
If you dont care about the safety feature of a mag switch then you can go with something like this: https://www.amazon.com/gp/product/B005W17FRS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I have one on my Unisaw. Its still wired into the original mag starter but since its an on-off switch and not a momentary button (like it originally had), the safety feature is rendered useless. Didn't bother me personally
I really like the insert I got for my center console.
Got it on Amazon for $13
JDMCAR for Toyota Tacoma 2016 2017 2018, Center Console Organizer Insert ABS Black Materials Tray, Armrest Box Secondary Storage https://www.amazon.com/dp/B07C7WNDZG/ref=cm_sw_r_cp_api_l7PXBb8T8571M
Also these are awesome. They clip over your normal rear view mirror and allow you to see a far bigger angle, minimizing or eliminating blind spots.
Thanks! Added myself using this.
The salesman I bought my car from owns a WRX and a STI and had it on his cars. He had a bunch of pinstripe tape, So i just got it from him. Not sure of brand/exact color but something like this: http://www.amazon.com/Trimbrite-T1118-Pinstripe-Tape-Red/dp/B00029XB1Y
Custom Fit Cup and Console Liner Acessories for Subaru WRX 2015 2016 2017 2018 2019 2020 (Red Trim) https://www.amazon.com/dp/B07MZ9TCYP/ref=cm_sw_r_cp_apa_i_o54mDbM6RE0EH
This was a total impulse buy and I don't regret it. Covers the door cup holders too
Had the shop that did my tint wrap it. Was going for this look: https://www.amazon.com/EV-Wraps-Tesla-Center-Console/dp/B07FZCPNR8/ref=sr_1_5?keywords=ev+wraps+tesla+model+3+center+console+wrap&qid=1564359292&s=automotive&sr=1-5
Thought about wrapping myself but since I was getting the tint done I decided to have them do it as well.
1/8 in.1/4 in. red pinstripe from Amazon. I may redo it. Two lessons I learned:Might be better buying the pre-cut stripe from FT86SF, but all in all the red chin and the side markers took less than half an hour.
Edit: Apparently it was 1/4 in. https://www.amazon.com/gp/product/B00029XBBE/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
https://www.amazon.com/Allstar-Performance-ALL14275-Clear-Surface/dp/B003BZO05C/ref=sr_1_3?ie=UTF8&qid=1480187362&sr=8-3&keywords=helicopter+tape
Comes in different widths and lengths. It's similar to putting a screen protector on your cell phone and will resist dents/marks/etc. I currently have it on my downtube, chain/seatstays, and a few other places to keep the frame protected.
One thing you didn't mention that might be worth considering is one of those big, police style rear view mirrors:
http://www.amazon.com/gp/product/B001A0J2JO/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687622&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B0015FYQ90&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1B3CNP4PMY6P8XDX2YQE
I've not tested one of these but it sounds worth at least considering given the circumstances you describe.
Apologies for the late reply! I'd use something like this.
I view the paint as the protector for the frame. But, if you're interested in protecting that, too, put helicopter tape over the paint.
This is the type of stuff you want. It needs proper prep and cleaning to stick right though.
3M (38583 1/4" x 15' Exterior Attachment Tape https://www.amazon.com/dp/B00JR4D7AA/ref=cm_sw_r_cp_api_i_DMFsDbBYZS2PN
It is probably custom order. Odds are that molecule is a major part of that guy's research.
Edit: On second thought, they are probably just a mix of This tape and letters like these.
It's just 4-inch red automotive pinstriping. I got it at my local O'Reilly Auto Parts for like $4.
https://www.amazon.com/gp/aw/d/B00029XBBE/ref=mp_s_a_1_8?ie=UTF8&qid=1502113381&sr=8-8&pi=AC_SX236_SY340_QL65&keywords=trimbrite&dpPl=1&dpID=51gv6EF%2BViL&ref=plSrch
I have something like a plastic bin that goes there, catches stuff and acts as extra storage.
That happened when we put that rubber stopper up there. Didn't help the noise. But know that apparently water doesn't get in there either as told to is by Tesla service. But what did help actually was putting rubber around the door using this kit. It's unnoticeable since ours is black/black. And doesn't look discombobulated when you open your doors.
Check this out at Amazon.com
BASENOR Tesla Model 3 Door Seal Kit Soundproof Rubber Weather Draft Seal Strip Wind Noise Reduction Kit https://www.amazon.com/dp/B07R13DYYY/ref=cm_sw_r_other_apa_i_MowxDbSWWQ6JB
I cleaned off the old adhesive and used new adhesive tape. 3M (38583) 1/4" x 15' Exterior Attachment Tape https://www.amazon.com/dp/B00JR4D7AA/ref=cm_sw_r_cp_api_wieGybYH9WV6Y
Have the $1 eBay version of these:
Catch Caddy 100-CC-MC24 Car Seat Catcher, Organizer https://www.amazon.com/dp/B0182QDLFE/ref=cm_sw_r_cp_api_qtfIzbQM2W51J
Completely worth it.
Thanks! Here's what I used:
Trimbrite T1118 1/8 Pinstripe Tape Red https://www.amazon.com/dp/B00029XB1Y/ref=cm_sw_r_cp_api_cjtIxbZ3CV402
The corners might not look perfect up close but it works for me!
Broadway BW849 360mm Type-A Convex Mirror https://www.amazon.com/dp/B0040E1HJA/ref=cm_sw_r_cp_api_i_vc3sDb1ATQQAJ I have this in my FJ and my race car. Works well.
Could it possibly be the brand of pin striping as well?
Here is what I used Incase it differs:
Trimbrite T1218 Trim Stripe Red 1/4 Tape https://www.amazon.com/dp/B00029XBBE/ref=cm_sw_r_cp_api_vDPQAb9KVS09D
Try: https://www.amazon.com/BASENOR-Soundproof-Rubber-Weather-Reduction/dp/B07R13DYYY
Recommended in this sub before.
https://www.amazon.com/Fit-System-RM011-Clip-Mirror/dp/B001A0J2JO
There's an example. It's nice, especially in full speed traffic on the freeway and you're worried the asshole in front of you is going to brake check you the moment you turn your head.
Specifically either of these should work fine:
http://www.amazon.com/3M-38583-Exterior-Attachment-Tape/dp/B00JR4D7AA/
http://www.amazon.com/3M-03614-Scotch-Mount-Molding-Tape/dp/B002JOVUO0/
Walmart usually carries both and any auto parts store too.
I've had these in my car for a while now and it's always interesting to pull them out and see what kind of treasures i've lost since the last time i checked.
If I remember correctly I just bought red pinstripe tape off amazon.
EDIT: This, http://www.amazon.com/Trimbrite-T1118-Pinstripe-Tape-Red/dp/B00029XB1Y/ref=sr_1_2?ie=UTF8&qid=1405101727&sr=8-2&keywords=pinstripe+tape
I bought it from Amazon. https://www.amazon.com/BASENOR-Soundproof-Rubber-Weather-Reduction/dp/B07R13DYYY/ref=sr_1_4?keywords=tesla+model+3&qid=1564800630&s=gateway&sr=8-4
Just got a roll of the tape off amazon and laid down on the concrete and slapped it on there myself.
[Link](Trimbrite T1218 Trim Stripe Red 1/4 Tape https://www.amazon.com/dp/B00029XBBE/ref=cm_sw_r_cp_api_i_ulLoDbVD4ZEBN)
This stuff off of Amazon.
It looks like with a bit of cleaning and replacing the start stop button with a new start/stop paddle switch you will be all set.
The replacement switch is cheap too: $17 http://www.amazon.com/Woodstock-D4151-220-Volt-Paddle-Switch/dp/B005W17FRS
Woodstock D4151 110/220-Volt Paddle Switch https://www.amazon.com/dp/B005W17FRS/ref=cm_sw_r_cp_api_ogXYxb59S2XJM
That's the switch I have
I bought this similar product:
BASENOR Tesla Model 3 Center Console Organizer Tray Accessoies with J1772 Charging Adapter Holder, Coin and Sunglass Holder for Tesla Model 3 https://www.amazon.com/dp/B07P2WT6B4/ref=cm_sw_r_cp_api_i_LL2sDbDEDASMJ
BASENOR Tesla Model 3 Door Seal Kit Soundproof Rubber Weather Draft Seal Strip Wind Noise Reduction Kit https://www.amazon.com/dp/B07R13DYYY/ref=cm_sw_r_cp_api_i_YfMFDb7HNGBDK
I used 3M Automotive double sided tape.
https://www.amazon.com/Motorcycle-Reflective-Scotchlite-ME-RK-99/dp/B00CEKUO1O
Did you buy this one? https://www.amazon.ca/Trimbrite-T1218-Trim-Stripe-Tape/dp/B00029XBBE/ref=mp_s_a_1_2?ie=UTF8&qid=1549729531&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=trimbrite+pinstripe&dpPl=1&dpID=51gv6EF%2BViL&ref=plSrch
Amazon.. EV Wraps Tesla Model 3 Center Console... https://www.amazon.com/dp/B07FZCPNR8?ref=yo_pop_ma_swf
This?
https://www.amazon.com/JessicaAlba-Container-Storage-Crosstrek-Forester/dp/B074GR9P9Q
Trimbrite T1218 Trim Stripe Red 1/4 Tape https://www.amazon.com/dp/B00029XBBE/ref=cm_sw_r_sms_apa_Rhc0zbCY1SCM1
https://www.amazon.com/Trimbrite-T1218-Trim-Stripe-Tape/dp/B00029XBBE/ref=mp_s_a_1_5?keywords=red+pinstripe&qid=1556205582&s=gateway&sr=8-5
Something along these lines
I use polyurethane tape. Not a lot of protection against bashing but I just ride XC so need light protection.
https://www.amazon.com/gp/aw/d/B003BZO05C/ref=yo_ii_img?ie=UTF8&psc=1 Most people just put it on their chain stays and areas that may get a lot of rub.
I'm clumsy and kept accidently hitting the bike with the tools and every time it'd chip
emergency stop
Not really a mod, but the first thing I bought was a Vehicle OCD tray that fits in the center console and makes it a little more functional instead of a massive endless void, along with some console dividers. It's the little things!
Also got a Toyota logo hitch plug and WeatherTech mats for the front and back seats.
https://www.amazon.com/gp/product/B00029XBBE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I recommend getting a wide angle rear view mirror. It's physically about twice as wide as a standard mirror, and it lets you see out of your side windows through your central mirror. The remaining blind spots are very small.
e.g.
https://www.amazon.com/Fit-System-RM011-Clip-Mirror/dp/B001A0J2JO/
Not usually.
In NY state I have a restriction on my drivers license that says I have to be wearing my hearing aides or have a full length rear-view mirror (or blind-spot mirror).
When I first started driving I had one. I used to get reminded of it all the time because passengers would not realize and hit their head on it while getting in to my hatchback. It's really not a bad thing to have regardless of hearing impairment or not, you can see everything behind you.
All my cars did this. Unfortunately for you and me, its most noticeable on white cars mostly as the dirt blends into darker colors.
I installed these on mine and it does help quite a bit with the dirt. amazon.com/BASENOR-Soundproof-Rubber-Weather-Reduction/dp/B07R13DYYY. Side effect is you now have to close the doors with a little more force, especially the back ones.
You could add the red strip to the lower front face and the back ( https://www.amazon.com/gp/product/B00029XBBE/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 ). It does look a lot sportier. You can also plasti dip all the chrome. Those are the only way I can think of not involving a louder exhaust.
https://www.amazon.com/Custom-Console-Liner-Acessories-Subaru/dp/B07MZ9TCYP/ref=mp_s_a_1_1_sspa?keywords=wrx+2019+cup+holder+mats&qid=1574810187&replacementKeywords=cup+holder+mats&sr=8-1-spons&vehicle=2019-13-22928------------&vehicleName=2019+Subaru+WRX&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyT0tTVTJJVVVaNzlKJmVuY3J5cHRlZElkPUEwNDMzNjI1MlJVV0hXQ1hDVEpLSCZlbmNyeXB0ZWRBZElkPUEwNjg2NDgwNVdPWUtHVkNDWE0xJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Edit: sorry for the long ass link but here ya go
The wind noise and the reverse camera delay are my two biggest complaints. Reverse camera delay is software related so that will likely get fixed in the coming months.
I have purchased both this basenor wind reduction kit and this wind guard which seem to help a little but I think most of the noise is coming through the front windshield somehow.
Catch Caddy 100-CC-MC24 Car Seat Catcher, Organizer https://www.amazon.com/dp/B0182QDLFE/ref=cm_sw_r_cp_api_QugIzbBQWXX1T
Try these! They really work! I got them for my wife's car because she used to drop her phone down there all the time.
3M. Do NOT use super glue!!!
This tape will work too. Also available in 1/2 inch. Follow the instructions to the letter.
I'd hate to have a saw start spinning if I leaned over the table and hit the pedal accidentally, or at any point really.
I use a paddle switch like this:
https://www.amazon.com/Woodstock-D4151-220-Volt-Paddle-Switch/dp/B005W17FRS
https://www.amazon.com/Woodstock-D4160-110-Volt-Paddle-Switch/dp/B005W17HYY
With leads or sockets made for removable tools:
https://www.amazon.com/Router-Safety-Paddle-Switch-Removable/dp/B01B1KE4EK/http://www.rockler.com/safety-power-tool-switch
http://www.woodpeck.com/elecswitch.html
https://www.amazon.com/ROUTER-TABLE-PADDLE-PEACHTREE-WOODWORKING/dp/B00153I3IC
I'd advise against using those screws since they are there specifically to tension the cooler against the GPU itself. Overtightening them could cause the silicon GPU die to chip or fracture.
Many people making acrylic backplates simply use a two-sided adhesive tape to stick it on. You only need to keep it from sliding off, it doesn't need much. The Automotive 3m tape works especially well.
https://www.amazon.com/dp/B00JR4D7AA