Reddit mentions: The best automotive pinstriping tape
We found 142 Reddit comments discussing the best automotive pinstriping tape. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 41 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Trimbrite T1218 Trim Stripe Red 1/4 Tape
- Lifetime Warranty
- High-quality vinyl and adhesives
- Customize the look of any vehicle
- Easy to apply around curves and contour surfaces
Features:
Specs:
Height | 0.3 Inches |
Length | 4.5 Inches |
Width | 3.7 Inches |
2. Allstar Performance ALL14275 Clear 2" x 30' Surface Guard Tape
Add protection to surfaces that are prone to scratching or chippingVirtually invisibleCrystal clear polyurethane film will not yellowFor best results apply at temperatures between 50F-80F2" wide x 30' long roll
Specs:
Height | 40.8 Inches |
Length | 67.2 Inches |
Number of items | 1 |
Size | 2" X 30' |
Width | 61.2 Inches |
3. 3M Super Strength Molding Tape, 03615, 7/8 in x 5 ft
Cut to size, no mess
Specs:
Color | Factory |
Height | 4 Inches |
Length | 6 Inches |
Number of items | 1 |
Release date | October 2011 |
Size | 7/8 in. x 5 ft. |
Weight | 0.0881849048 Pounds |
Width | 1 Inches |
4. Trimbrite T1118 1/8 Pinstripe Tape Red
Lifetime WarrantyHigh-quality vinyl and adhesivesCustomize the look of any vehicleEasy to apply around curves and contour surfaces
Specs:
Color | Regular |
Height | 0.2 Inches |
Length | 4.5 Inches |
Number of items | 1 |
Weight | 0.05 Pounds |
Width | 4.3 Inches |
5. 3M Exterior Attachment Tape, Ideal for Moldings, Emblems and Trim, 1/4 in width x 5 yards in length, 1 roll
- Ideal for attaching moldings, emblems and trim to exterior painted automotive surfaces
- For industrial/occupational use only. Not for consumer sale or use.
Features:
Specs:
Height | 0.8 Inches |
Length | 6.7 Inches |
Number of items | 1 |
Release date | April 2014 |
Size | 1/4" w x 5 yards |
Weight | 0.0881849048 pounds |
Width | 4.85 Inches |
6. Motorcycle Black Reflective Tape 3M Scotchlite DYI Kit ME RK-99
- This is an uncut DYI kit for you to make your own designs
- Reflective Vinyl Tape Kits use 3M Scotchlite
- Uses 3M's finest engineer-grade, 7-mil, 7-year spec, BLACK reflective tape
- Great for Side bags, Top cases, Helmets and more
- Each kit comes complete with installation instructions
Features:
Specs:
Color | Black |
Height | 0.2 Inches |
Length | 11 Inches |
Weight | 0.0625 Pounds |
Width | 9 Inches |
7. 3M 6654 Yellow 36 mm x 55 m 06654 Automotive Refinish Masking Tape-36 mm
- DELIVERS SHARP PAINT LINES: Adhesive resists lifting and curling, prevents bleed through, helping to maintain sharp paint lines
- HUGS AUTO CURVES AND CONTOURS: Flexible, conformable backing resists breaking for faster and more consistent masking
- LEAVES NO RESIDUE, NO DAMAGE: Quick and easy removal, helping reduce scraping and scrubbing of residue
- USE INDOORS AND OUTDOORS: UV and light resistant
- SUPER STRONG: Excellent tape strength end-to-end, resists breaking
- USE ON A VARIETY OF SURFACES: Delivers consistently superior performance on moldings, plastic, glass, metal, rubber and paint.
- EASY TO UNWIND AND REMOVE: Special 3M backing provides for superior control during unwinding, making it less likely the tape wrinkles or pulls away.
- WORKS WITH DIFFERENT PAINT SYSTEMS: Compatible with water or solvent based paint systems.
- WORKS IN DIFFERENT CONDITIONS: Tape also resists temperatures up to 250°F (121°C) for up to 30 minutes, making it suitable for longer baking cycles.
- SAVE TIME AND MONEY: Tape and roll design affords more usable tape per roll vs. lower-priced brands
Features:
Specs:
Color | Green |
Height | 1.42 Inches |
Length | 4.25 Inches |
Number of items | 1 |
Release date | October 2011 |
Size | 36 mm x 32 m |
Weight | 0.35 Pounds |
Width | 4.25 Inches |
8. 3M Auto High Strength Red Lens Repair Film, 03341, 3.75 in x 7.75 in
Flexible film repairs flat or curved lenses on truck and car taillights and signal lightsWeatherproof and airtight seal helps block rain, snow and dirt, protecting electrical componentsQuick and easy-to-use adhesive film is less expensive than replacement lensesStrong adhesive backing provides tempo...
Specs:
Color | Red |
Height | 8.875 inches |
Length | 4.125 inches |
Number of items | 1 |
Release date | September 2013 |
Size | 3.75 in x 7.75 in |
Weight | 0.09 Pounds |
Width | 0.25 inches |
9. GOADROM Car Interior Moulding Trim,3D DIY 5 Meters Electroplating Color Film Car Interior Exterior Decoration Moulding Trim Strip line by Auto Parts Club (red)…
- 【New electroplating design】Enduring Character Color, Embedded Mounted in Your Car, And Will Not Cause Damage To The Car Surface, Super Flexible, Makes this Easy to Install Around Those Tight Corners and Hard to Reach Places.
- 【Automobile Interior Trim】Simple and Convenient Installation,Great For Both Interior&Exterior Decorating of Your Car,Universal Fit All Auto.
- 【High Quality Materials】The Use of Environmental Protection,For the Production of PVC Soft Plastic Paste Performance is Super Elasticity,Perfect Car Interior Decorations Makes this Easy to Install Over the Hard to Reach Places.
- 【Beautify The Appearance】Can Prevent The Ash Layer Into The Gap Is Difficult To Clean Up The Cause Not Beautiful, Is Suitable Decoration To The Window, Columns And Cover, Rearview Mirror Be Careful When You Are Cutting The Trim Strip.
- 【Unique Function Moulding Trim Strip】Flexible Shape to Decorate Your Car Interior Trim,Metal Reflective Radiation Processing,Soft Material,Shock Absorption To Sound.(If you buy there are damaged or are not satisfied, please E-mail contact us, we will reply to you within 12 hours, and send a new project for you)
Features:
Specs:
Color | red |
Size | Red |
10. Trimbrite T9005 Black-Out Tape
- Conceals unwanted chrome accent trim for tasteful restyling
- Conceals chips, scuffs and scratches on black moldings for enhanced like-new appearance
- Lifetime warranty for optimal reliability
- Self-adhesive and easy to apply for quick installation
- Width: 1.375 in.
- Length: 20.00 ft.
Features:
Specs:
Height | 1.6 Inches |
Length | 8 Inches |
Number of items | 1 |
Weight | 0.15 Pounds |
Width | 5 Inches |
11. ISC Racers Tape HT2314 ISC Helicopter-OG-HD Surface Guard Tape: 2" x 30 ft, Transparent
ISC Helicopter-OG-HD Heavy Duty Surface Guard Tape is conformable and extremely strong 14-mil outdoor grade polyurethane tape. Also known as helicopter blade/leading edge wing tape, the thick film backing provides exceptional protection from tearing, punctures, erosion, and abrasion. ISC's surface g...
Specs:
Color | Transparent |
Height | 2 Inches |
Length | 4.5 Inches |
Number of items | 1 |
Size | 2 in. x 30 ft. |
Weight | 0.65 Pounds |
Width | 4.5 Inches |
12. 3M Wrap and Repair Silicone Tape, 03625, 1 in x 6 ft
- REPAIR SEAL LEAKS AND PATCH HOLES: Fix broken pipes or seal leaks by wrapping the tape around the repair area and allow the silicone to fuse to itself, forming a permanent, air and water tight seal.
- EASY TO USE: Adhesive free tape bonds to itself, creates no mess and requires no special tools to fix pipes
- MULTI USE: Versatile tape recommended for hose, electrical, plumping, and tool repair
- CREATES A TIGHT PERMANENT SEAL: Self-fusing properties create a water and air tight seal
- SUPER CONFORMABLE: Conformability and flexibility of tape makes curved surface repairs easy.
- HIGHLY WEATHERABLE: The tape withstands heat, friction and UV and extreme temperatures of -85 degrees F to 500 degrees F
- CLEAR APPEARANCE: Clear in color for strong, less visible repairs
- No Tools Required
- Good to keep handy in your garage or vehicle in case of emergency repairs
- Repair expensive hoses and pipes instead of replacing them.
Features:
Specs:
Height | 5.4 Inches |
Length | 2.05 Inches |
Number of items | 1 |
Release date | September 2013 |
Size | Silicone Tape |
Weight | 0.065 Pounds |
Width | 3.8 Inches |
13. Trimbrite T1114 1/8 Pinstripe Tape Black
Lifetime WarrantyHigh-quality vinyl and adhesivesCustomize the look of any vehicleEasy to apply around curves and contour surfaces
Specs:
Color | Regular |
Height | 0.6 Inches |
Length | 4.3 Inches |
Weight | 0.05 Pounds |
Width | 3.4 Inches |
14. 3M Super Strength Molding Tape, 03616, 7/8 in x 15 ft
- PERMANENT PRO RESULTS: Permanently attaches side moldings, trim and emblems to the interior and exterior of vehicles
- WEATHERABLE: High strength double-sided adhesive withstands weather and impact. Temperature use range is -40F to 250F
- EASY TO USE: Cut, apply, press. That's it. No tools required. Avoid mess of liquid adhesives
- SUPER CONFORMABLE: 3M VHB tape conforms to irregular and textured surfaces
- BOND WITHOUT RIVETS/SCREWS: Aircraft-grade adhesive strength allows for strong metal to metal bonding without rivets
Features:
Specs:
Color | Black |
Height | 1 Inches |
Length | 7 Inches |
Number of items | 1 |
Release date | October 2011 |
Size | 7/8 in. x 15 ft. |
Weight | 0.1 Pounds |
Width | 5.5 Inches |
15. 3M Scotchlite 3150A Solas Grade Reflective Conspicuity Tape (2 inch x 6 feet)
3150A Solas Grade Tape cut from master roll and repackagedOne continuous roll measures 2 inch wide x 6 feet long
16. ATMOMO 5M Flexible Trim for DIY Automobile Car Interior Exterior Moulding Trim Decorative Line Strip (Red)
Size: About 5M long, 5MM wideWorks perfectly for both interior and exterior applicationsWill not damage the surface of your carSuper flexible, makes this easy to install around those tight corners and hard to reach placesPackage includes: 1 Bag Car Moulding Strip (5M Long/Bag)
Specs:
Color | Red |
Height | 7.480314953 Inches |
Length | 9.842519675 Inches |
Width | 0.787401574 Inches |
17. Camco 25401 Non-Slip Grip Tape for Steps (2" x 15', Black)
- 2"W x 15' L
- Self-adhesive Tape
- Helps prevent slips and falls
- Used for added safety on steps, ladders and walkways
- Black
Features:
Specs:
Color | Black |
Height | 2 Inches |
Length | 4.5 Inches |
Number of items | 1 |
Weight | 0.35 Pounds |
Width | 4.3 Inches |
18. Dorman 85294 Multi-Color 12' PVC Electrical Tape Assortment
Package Weight : 0.022 poundsMulti-Color RollsMaximum Voltage: 600 VoltsPackage Dimensions: 11.684 L x 4.318 H x 7.366 W (centimeters)
Specs:
Height | 2 Inches |
Length | 6 Inches |
Number of items | 1 |
Width | 4 Inches |
19. 3M Scotchlite Reflective Striping Tape, Orange, .25-Inch by 50-Foot
Sale Unit: ROLLBrand: 3MTrade Name: Scotchlite3M Number: 79907Type: Striping
Specs:
Color | Orange |
Height | 0.4 Inches |
Length | 6.5 Inches |
Number of items | 1 |
Weight | 0.2 Pounds |
Width | 7.5 Inches |
20. ORACAL 3"x72" Vinyl Racing Stripe Decal 651 (Gloss Black)
- 6-9 Year Outdoor Life Expectancy
- Clear Transfer Tape For Easy Installation
- Available in 18 Colors
- Will adhere to any smooth, hard, dry surface
Features:
Specs:
Color | Gloss Black |
Height | 0 Inches |
Length | 72 Inches |
Size | 3 inch x72 inch |
Width | 3 Inches |
🎓 Reddit experts on automotive pinstriping tape
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive pinstriping tape are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Adding in where I got everything for those interested:
This stuff is awesome! It's the RedLine Interior I used
Also, these, I went with the rear lights, reflectors and side lights and the darkest they had to go with my black/white motif.
Finally I got some sweet strobe vinyl decals on ebay and the classic challenger emblems for the sides.
Can't forget about the HellCat Intake Not sure if it adds much in terms of HP but it definitely gets the intake temp down on the freeway. You'll need this as well for it to connect to your headlight. FYI it's not very tight of a fit around the lip but I don't think it matters much. There's a few videos out there on how to install it, super easy, only took about 20 minutes. ( Note: you need a '15-'17 Challenger to do this)
Looks great! If you wanted to get super technical, you could buy this https://www.amazon.com/Trimbrite-T1114-Pinstripe-Tape-Black/dp/B00029XAYW and cover the line between the blue and yellow. It would make the line perfect, and be just like the original. Good work though, I've tried my hand at painting a few helmets with mixed results.
I agree w/ /u/beatuifulpoe on the Young Justice version. Also, it looks sleek and modern IMO.
For ease of looking things up, here's Evil Ted Smith for your EVA foam tutorials. Also, Punished Props are awesome too.
I've used a tail light repair kit for a cyclops visor I did in the past. The clarity through this is great! Just use a heat gun to shape it.
You can use these LED strips for the helmet lighting. They've already get resistors built in so all you need is a switch and 9v battery. 3 strips easily powered by one 9v battery and is still pretty bright.
Oh yeah the sound system is great in these cars Fender did a good job. Yep just like the GTI badge. I was really glad to see they added that and the red lipstick to the new models. Finally showing the GLI a little love, now if we could just get a sport model like the GTI. If you were interested in adding the lipstick I did it myself on my 13 with just some red vinyl racing stripe tape like this. Here's a pic of how it came out sorry it's a little dark but the best I could find.
It's actually just an interior trim you can get on amazon, like 10 bucks for 5 feet. It fits in the creases between the chrome and black dash giving it a real slick look imo. Super easy and cheap mod for a cool look.
And trust me I know, especially with Michigan winter approaching. I'm planning to pick up weathertech matts haha.
Edit: Red Trim it's also 5 meters not feet. I bought two, barely used any of the second one.
Total cost: $31.70
Time: ~30 minutes.
Tools required: Hand drill
Now that it gets dark so damn early, I've been using my headlights a lot more, and I noticed that they weren't as bright as they used to be. So, on the advice of a coworker, I picked up THIS headlight restoration kit from amazon, as well as THIS sealer and THIS masking tape (to protect the paint around the lens). The directions were clear and concise and the whole process took about 30 minutes and was extremely easy. It comes with an attachment for your hand drill to which a variety of sanding/buffing discs mount. You start with a coarse grit sandpaper disc to remove the oxidation and then you use progressively finer grit discs to smooth out the surface. Finally you buff and seal the lens.
I couldn't be happier with the results. The lenses look brand new and there are enough sanding discs left over to do at least one or two more cars.
You can always go the ghetto route and use an old tube, but I'd recommend clear helicopter tape. Don't bother with bike specific tape, it's a huge ripoff. Buy this: http://smile.amazon.com/dp/B003BZO05C
This is what I use for all my bikes and it works really well. A 30 ft. roll is plenty to protect multiple bikes; you won't be fucked if you mess up because you'll probably have another 25 ft. of tape left. Also, buy a small squeegee and a spray bottle if you don't have these already. It will make applying the tape a breeze.
Yes, great trick.
ProTip: Heat up sticky with lighter WITH red covering on, then peel it off and stick to clean surfaces. This prevents all the black chemicals from being on the avtual adhesive which could diminish the effectiveness. Also dont overheat it.
If doing on cars with decals, or nice paint jobs use some helicopter tape between sticky and surface. But its pricey. https://www.amazon.com/Allstar-Performance-ALL14275-Clear-Surface/dp/B003BZO05C?ref_=fsclp_pl_dp_1
I dont use it on my shoei 600$ helmet but have on many cars with decals and vinyl logos and such.
Good luck.
I have speakers that are not quite that big, but still large, taped to my toolbox at work. I use the 3M Automotive Tape since we have tons of it on hand. It's double-sided foam tape and it's super sticky. Also how I had my license plate mounted to my car for a while there.
They've held up so far, and I'm sure in a climate controlled bedroom, the tape would last much longer. I wouldn't worry about them falling off, unless you had massive home theater speakers on there...
3M auto tape has a double back adhesive and is pretty resilient to most operating temperatures. Best to apply on a clean surface during a warm day or blow dry it in place.
Hey, glad you liked it. I used this. Was super cheap and very easy to put in place. You'll need a steady hand and some patience but overall it's not too hard. If you check my other submissions here, you'll see I did the front bumper, side fender badges, and mirrors with this same tape. Just take your time, use wax / grease remover, and clean the area with isopropyl alcohol before laying it down.
I used something like this. They'll probably have clear as well.
Edit: To pass inspection I believe you'll need to make sure that the whole thing is sealed. So if the crack is right on the edge, you may be out of luck.
http://www.amazon.com/ISC-Helicopter-OG-HD-Surface-Guard-Tape/dp/B000QC6H90/ref=sr_1_2?ie=UTF8&qid=1370660984&sr=8-2&keywords=helicopter+tape
Cheap and that roll is enough to do 3 entire bikes. Takes a bit of practice, but you'll have plenty of it to practice with. It is completely clear and looks / feels just like a clear bra.
Go to Amazon and order this (I like Meg's products),
This should run you about $345 for everything and have you setup to take care of your car for a long time. You can find a 20% discount code online for harbor freight to bring the price down $55 for the DA. Go to home depot and buy a couple buckets and you will be good to go.
Edit: To add, I went to Lowes and bought a cheap inline sprayer for my hose and it works fine for foaming up the vehicle, plus it only costs $5.
Edit2: If you are going to downvote me please post why you don't like my recommendation.
Here's a link, you can get it in pretty much any width you want, so look at something like a ruler to get an idea of what you'd like. I would also make sure you have a sharp razor/cutting implement to give a clean cut end.
Pin Stripe Tape
I used these.
https://www.amazon.com/gp/product/B00CEKUO1O/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
My BIL is super good at drawing/tracing stuff and he loved the idea. I bribed him to do it and he spent the morning cutting, test-fitting, and applying them.
3M Scotchlite Reflective Striping Tape, Orange, .25-Inch by 50-Foot https://www.amazon.com/dp/B0010AW0GG/ref=cm_sw_r_cp_apa_PljLxbMGD3VX3
As for the clean curves, just take it slow and easy. The tape is pretty flexible, and very adhesive. And take the top layer of tape off before applying. (See below)
There were three layers to the tape. The bottom layer was the backing, covering the adhesive. Then the tape itself. Then there was a layer on top that at first I didn't notice. I was a bit disappointed in the tape until I peeled that one off.
Hmm interesting concept. I could probably achieve something similar via different means.
For me I used hockey tape (nice matte black fabric like tape) and taped my Razer Firefly wire to itself, and ran it and my mouse cable (with some slack for movement) under my keyboard, then taped all 3 together and ran it to the back of my desk under my sound bar so it "looks" like only a single large cable going to the back of the desk.
Underneath I have a surge protector and a usb hub stuck with double-sided 3M automotive adhesive (I use this stuff for everything). and then these in expensive adhesive J-channel cable race for wires.
I also got rid of my center support leg in exchange for a heavy duty shelf bracket.
https://imgur.com/a/XZpd7f2
https://www.amazon.com/3M-03615-Scotch-Mount-Molding-Tape/dp/B000BO9L00/ref=sr_1_2?crid=2K2C6TAK8T4QQ&keywords=3m+automotive+double+sided+tape&qid=1568764442&sprefix=3m+auto%2Caps%2C157&sr=8-2
https://www.amazon.com/Channel-Cable-Raceway-Black-Length/dp/B002DNM42O/ref=sr_1_2?keywords=j+channel+wire&qid=1568764412&sr=8-2
Ah well there you go! I would think even if you had the legal colors it would make you more of a target for cops though. I personally like the stealth route since uh, yeah I am probably always speeding a bit.
If you want increase visibility, they make reflective tape that you can add to the back of your helmet, jacket, bike, etc.. Comes in black so if you have a black helmet it just blends in. I noticed that once I added a few big pieces to the back/sides of my helmet cars hung way further back from me at night.
Edit: this is the stuff I have:
https://www.amazon.com/Motorcycle-Reflective-Scotchlite-ME-RK-99/dp/B00CEKUO1O
Thanks! I'm planning to do a post on it when I finally have the bar positions and cable routing figured out.
Agree about visibility - have you ever seen this stuff? It's incredibly bright with even relatively dim light sources. I'm planning to put a strip of it around my rims.
Thank you! I often stare at that ass also when I walk away
I love the eyesight, it's something I didn't think I would need, but after having it, I can't live without it. I use it frequently on the freeway. Only caution I would throw in is if you know there's traffic, don't rely on eyesight's breaking, because it sometimes catches completely stopped traffic a tad late, and breaks really hard. When it accelerates, it tends to accelerate pretty hard too.
I typically throw on the adaptive cruise control and lane guard and cruise on the freeway.
I bought this tape for the red trims.
https://www.amazon.com/gp/product/B00029XBBE/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I taped it along the grooves in the back, turned out better than I expected!
Trimbrite T1118 1/8 Pinstripe Tape Red https://www.amazon.ca/dp/B00029XB1Y/ref=cm_sw_r_cp_api_o8M0BbA9GEJ5B
With patience and a steady hand, it can turn out amazing.
Maybe consider this self-adhering silicone tape. It's pretty amazing stuff. Very stretchy and permanently bonds to itself.
Remove the old trim by using fishing line to separate the tape from the body. After, I would recommend using a 3m stripe off wheel like this -
http://www.youtube.com/watch?v=HHKN5_UfDik
to remove all the old glue from the car and the trim, then re-stick it on with 3m double sided trim tape - like this.
http://www.amazon.com/3M-03616-Scotch-Mount-Molding-Tape/dp/B0026HOTZ2/ref=sr_1_3?s=automotive&ie=UTF8&qid=1346365814&sr=1-3&keywords=3m+molding+tape
Use a level/long ruler to make sure your trim is level with the old trim on the rest of the car. Level it to the other trim piece, not the ground, your car might be lower in the front for example.
I've heard good things about this
I'd measure your trim and make sure it's wide enough before ordering though. Make sure you get some as wide as the trim you're blacking out.
Honestly attempt it yourself. It's like $12 on Amazon (you may need to get 2). And if it doesn't work out then take it somewhere.
Trimbrite T9005 Black-Out Tape https://www.amazon.com/dp/B00029XD62/ref=cm_sw_r_sms_apip_YuWHWRm4MPRtv
Ordered this stuff from Amazon.
Beware that it's REALLY difficult to get it to work real nice around the sharp corners of the trim. I didn't try heating it up or anything because it's a matte black and I didn't want it to gloss over from heat/melting.
Honestly, you might want to look into vinyl wrapping through a local tint shop or similar - you should have better results that last longer. This stuff chipped and pealed in some areas after about 9 or 10 months in mild PNW weather.
Well I bought these stripes from amazon
3"x72" Vinyl Racing Stripe Decal Oracal 651 (Gloss Black) https://www.amazon.com/dp/B01HYCO7NC/ref=cm_sw_r_other_apa_pc.zybGXTMH1M
Was just still debating whether or not I should put them on or if it was an impulse buy. At least i only spent like $20 total.
Holding up great. Trimbrite T1218 Trim Stripe Red 1/4 Tape https://www.amazon.com/dp/B00029XBBE/ref=cm_sw_r_cp_apa_i_CjGUDbTKJEJ2X
I just bought this one and did it myself actually. Any good generic 3M-type stripe tape should work well.
http://www.amazon.com/Trimbrite-T1218-Trim-Stripe-Tape/dp/B00029XBBE/ref=sr_1_1?ie=UTF8&qid=1453491270&sr=8-1&keywords=trimbrite+red+pinstripe
I used to work in boats and there are only a few products that really work. They vary in price and are for different applications.
For smaller patches JB Weld has a two part marine adhesive that isn't too expensive (make sure to follow directions)
http://www.amazon.com/J-B-Weld-8272-MarineWeld-Marine/dp/B000KKPFFA/ref=sr_1_41?ie=UTF8&qid=1458915714&sr=8-41&keywords=two+part+marine+epoxy
3M has a tape that i've used before and works well if you can dry/clean the surface before applying.
http://www.amazon.com/3M-03625-Wrap-Repair-Silicone/dp/B00G25GOCA/ref=pd_sim_263_3?ie=UTF8&dpID=51uPJZ9CL0L&dpSrc=sims&preST=_AC_UL160_SR114%2C160_&refRID=1G59XP3NQHA92MR38NTY
Car interior moulding Trim,3D... https://www.amazon.com/dp/B06Y58FM9K?ref=yo_pop_ma_swf
And
VViViD XPO Red Carbon Fiber... https://www.amazon.com/dp/B00FXYDGCM?ref=yo_pop_ma_swf
Cheers!
I used this:
1/4" 3M Vinyl Striping 150' 25 Colors Available (Tomato Red) https://www.amazon.com/dp/B00HQN3W40/ref=cm_sw_r_cp_apa_i_9QkJDbZ97CZ7J
Although the red shade is a bit lighter than the red GTI strip.
I've seen some people recommend this one as well in the mk7owners forum:
Trimbrite T1218 Trim Stripe Red 1/4 Tape https://www.amazon.com/dp/B00029XBBE/ref=cm_sw_r_cp_apa_i_2RkJDbW95FJ4X
I drive a car and ride both a motorbike and bicycle. Turn your fucking strobe light off.
If visibility is a concern (as it should be) get two lights and mount them on opposite sides of your handlebars. Or get a helmet-mounted light. Or put reflective tape on your helmet and front forks. Don't fuck around with cheap reflective tape, the stuff you want is called SOLAS (Safety of Life at Sea). It's the shit that's mandated by the Coast Guard so that if a boat has lost power and is running dark, they can be found at night, in heavy rain, with a searchlight hundreds of yards away.
Having two lights allows depth perception to kick in, so other people on the road can estimate your speed / direction better. A lot of 4 wheel vs 2 wheel crashes aren't caused by lack of visibility, but from the 4 wheeler seeing the 2 wheeler and misjudging their speed and thinking they can make that turn without affecting the 2 wheeler.
Maybe you could use the same tape as on skateboards and stairs? It's pretty resistant and can be changed when worn down, it's also rather cheap!
Griptape Amazon link
Spike tape is paper-based and pricey, pvc or polyvinyl chloride tape ie electrician's tape, is plastic-based and comes in many colors, and is much cheaper.
Links: http://www.stagespot.com/spike-tape.html ; http://www.amazon.com/Dorman-85294-Multi-Color-Electrical-Assortment/dp/B002H99P9O
edited to add links. =D
Examples of the tape? http://www.amazon.com/gp/aw/d/B000QC6H90/ref=pd_aw_sims_1?pi=SL500_SS115&simLd=1
Does that help?
Thanks! Added myself using this.
The salesman I bought my car from owns a WRX and a STI and had it on his cars. He had a bunch of pinstripe tape, So i just got it from him. Not sure of brand/exact color but something like this: http://www.amazon.com/Trimbrite-T1118-Pinstripe-Tape-Red/dp/B00029XB1Y
Like this stuff? 1/8 inch?
1/8 in.1/4 in. red pinstripe from Amazon. I may redo it. Two lessons I learned:Might be better buying the pre-cut stripe from FT86SF, but all in all the red chin and the side markers took less than half an hour.
Edit: Apparently it was 1/4 in. https://www.amazon.com/gp/product/B00029XBBE/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
I would probably think about putting the grippy strips (like this) on the steps/stairs, just to be safe.
https://www.amazon.com/Allstar-Performance-ALL14275-Clear-Surface/dp/B003BZO05C/ref=sr_1_3?ie=UTF8&qid=1480187362&sr=8-3&keywords=helicopter+tape
Comes in different widths and lengths. It's similar to putting a screen protector on your cell phone and will resist dents/marks/etc. I currently have it on my downtube, chain/seatstays, and a few other places to keep the frame protected.
Apologies for the late reply! I'd use something like this.
I buy these color-coded velcro ties from Monoprice to organize all my cables, then for signal-paths I use these color-coded electrical tape rolls. I'll wrap the ends of my cables (mic and instrument) with a color, then every time a cable goes in or out it gets marked with the same color, and lastly the front of my equipment gets a little piece too.
Buy some cheap plastic cart storage to keep cables in when you're not using them, and some guitar wall mounts for when you're not using those.
Less than 50 bucks and all that you'll have left to do is force yourself to clean up when you're finished - the hardest part.
I view the paint as the protector for the frame. But, if you're interested in protecting that, too, put helicopter tape over the paint.
It is probably custom order. Odds are that molecule is a major part of that guy's research.
Edit: On second thought, they are probably just a mix of This tape and letters like these.
This is the type of stuff you want. It needs proper prep and cleaning to stick right though.
3M (38583 1/4" x 15' Exterior Attachment Tape https://www.amazon.com/dp/B00JR4D7AA/ref=cm_sw_r_cp_api_i_DMFsDbBYZS2PN
It's just 4-inch red automotive pinstriping. I got it at my local O'Reilly Auto Parts for like $4.
https://www.amazon.com/gp/aw/d/B00029XBBE/ref=mp_s_a_1_8?ie=UTF8&qid=1502113381&sr=8-8&pi=AC_SX236_SY340_QL65&keywords=trimbrite&dpPl=1&dpID=51gv6EF%2BViL&ref=plSrch
Hair dryer and dental floss to get the old stuff off. Heat up the tape and use the floss to get under it. Then just pull slowly and it will all come off. Use standard soap and water to clean it and then use the same 3M tape they put it on with originally. They make an adhesion promoter you can use as well, but attention to detail when cleaning the area will suffice.
Link
I cleaned off the old adhesive and used new adhesive tape. 3M (38583) 1/4" x 15' Exterior Attachment Tape https://www.amazon.com/dp/B00JR4D7AA/ref=cm_sw_r_cp_api_wieGybYH9WV6Y
Yeah: https://www.amazon.com/Trimbrite-T9005-Black-Out-Tape/dp/B00029XD62
Thanks! Here's what I used:
Trimbrite T1118 1/8 Pinstripe Tape Red https://www.amazon.com/dp/B00029XB1Y/ref=cm_sw_r_cp_api_cjtIxbZ3CV402
The corners might not look perfect up close but it works for me!
Could it possibly be the brand of pin striping as well?
Here is what I used Incase it differs:
Trimbrite T1218 Trim Stripe Red 1/4 Tape https://www.amazon.com/dp/B00029XBBE/ref=cm_sw_r_cp_api_vDPQAb9KVS09D
Specifically either of these should work fine:
http://www.amazon.com/3M-38583-Exterior-Attachment-Tape/dp/B00JR4D7AA/
http://www.amazon.com/3M-03614-Scotch-Mount-Molding-Tape/dp/B002JOVUO0/
Walmart usually carries both and any auto parts store too.
Amazon,
https://www.amazon.com/gp/aw/d/B01HYCO7NC
If I remember correctly I just bought red pinstripe tape off amazon.
EDIT: This, http://www.amazon.com/Trimbrite-T1118-Pinstripe-Tape-Red/dp/B00029XB1Y/ref=sr_1_2?ie=UTF8&qid=1405101727&sr=8-2&keywords=pinstripe+tape
Just got a roll of the tape off amazon and laid down on the concrete and slapped it on there myself.
[Link](Trimbrite T1218 Trim Stripe Red 1/4 Tape https://www.amazon.com/dp/B00029XBBE/ref=cm_sw_r_cp_api_i_ulLoDbVD4ZEBN)
This stuff off of Amazon.
Taking it off and re-taping it would be way cheaper https://www.amazon.com/Trimbrite-T9005-Black-Out-Tape/dp/B00029XD62
https://www.amazon.com/3M-Scotchlite-3150A-Reflective-Conspicuity/dp/B015PFXB00
http://www.infraredcoatings.com/
https://www.empiretactical.org/infrared-reflective-patches/3m-solas-infrared-id-x2-set-extreme-adhesive
https://www.amazon.com/gp/product/B00029XBBE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
You can do this yourself for much less than hiring someone. Grip tape
Auto pinstriping tape works the best you should be able to find it at any hardware or auto parts store.
Did you buy this one? https://www.amazon.ca/Trimbrite-T1218-Trim-Stripe-Tape/dp/B00029XBBE/ref=mp_s_a_1_2?ie=UTF8&qid=1549729531&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=trimbrite+pinstripe&dpPl=1&dpID=51gv6EF%2BViL&ref=plSrch
https://www.amazon.com/gp/aw/d/B003BZO05C/ref=yo_ii_img?ie=UTF8&psc=1 Most people just put it on their chain stays and areas that may get a lot of rub.
I'm clumsy and kept accidently hitting the bike with the tools and every time it'd chip
https://www.amazon.com/Motorcycle-Reflective-Scotchlite-ME-RK-99/dp/B00CEKUO1O
I use polyurethane tape. Not a lot of protection against bashing but I just ride XC so need light protection.
For the window trim I wouldn't suggest painting it. I suggesting picking up a few rolls of this http://www.amazon.com/Trimbrite-T9005-Black-Out-Tape/dp/B00029XD62 I think 2 covers the whole car and then some. Also pick up a cheap exacto knife.
For the kidneys and front grille I suggest popping them out and painting them. Do a dark primer and then my suggestion would be a flat or semi-gloss black. Shouldn't cost much.
Use 3m double sided body mold tape.
https://www.amazon.com/3M-03616-Scotch-Mount-Molding-Tape/dp/B0026HOTZ2
https://www.amazon.com/Trimbrite-T1218-Trim-Stripe-Tape/dp/B00029XBBE/ref=mp_s_a_1_5?keywords=red+pinstripe&qid=1556205582&s=gateway&sr=8-5
Something along these lines
I used 3M Automotive double sided tape.
you can also put Grip tape on the sides too
Trimbrite T1218 Trim Stripe Red 1/4 Tape https://www.amazon.com/dp/B00029XBBE/ref=cm_sw_r_sms_apa_Rhc0zbCY1SCM1
If they're adhesive pinstripes, this thing will take the old stripe off in no time at all, and you could either get pinstripe tape, or take it to someone to run the lines with paint, shouldn't be too spendy. I'd talk to a painter if they're painted on, though.
You could add the red strip to the lower front face and the back ( https://www.amazon.com/gp/product/B00029XBBE/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 ). It does look a lot sportier. You can also plasti dip all the chrome. Those are the only way I can think of not involving a louder exhaust.
3M. Do NOT use super glue!!!
This tape will work too. Also available in 1/2 inch. Follow the instructions to the letter.
You should put vinyl blackout tape over the parts you want to murder.
[blackout tape on amazon](http://Check this out at Amazon.com
Trimbrite T9005 Black-Out Tape https://www.amazon.com/dp/B00029XD62/ref=cm_sw_r_other_apa_i_21c4Db100R7WA)
I'd advise against using those screws since they are there specifically to tension the cooler against the GPU itself. Overtightening them could cause the silicon GPU die to chip or fracture.
Many people making acrylic backplates simply use a two-sided adhesive tape to stick it on. You only need to keep it from sliding off, it doesn't need much. The Automotive 3m tape works especially well.
https://www.amazon.com/dp/B00JR4D7AA