Welcome to the sub. I'm so sorry you're having a tough time.

It might help your anxiety a little to know that there are a couple of simple, low-cost solutions available for your problem. I hope my reply can give you a little relief.

> This led to piles of garbage and food in my room...now there are tons of these small flying bugs making it a very tough thing to tackle....

I know this one, 'cause I had this problem a couple of summers ago--you have fruit flies! They're a bother, to be sure, but they're pretty easy to get rid of:

1. Go to the grocery. Buy a container of apple cider vinegar. You'll probably find it in the same aisle as the salad dressings. Buy the cheap, non-organic stuff; you're not cooking with it, after all.
   
2. If you don't have any, buy a small container of cheap dishwashing liquid.
   
3. Pour about half a cup of the apple cider vinegar into a wide-mouthed glass and add a few drops of dishwashing liquid. Do this with multiple glasses if needed.
   
4. OPTIONAL: Seal the mouth of each glass with a little plastic wrap, and then poke a couple of holes in it with a fork. Once the flies get in, they can't get out!
   
5. Set the glasses in any room where you saw fruit flies.
   
6. Wait.
   
7. When the glasses are filled with flies (and it won't take long, the little fuckers love this stuff), pour out the fly-filled cider into your sink (I like to run cold water when I do). Refill, and do it again. Repeat as needed.
   
8. Video aid
   
9. The above method also works with gnats.
   
10. Don't use this method if you keep your windows open, because fruit flies are drawn to the smell of the cider vinegar and will come into your house.
    
    Now, to make this method TRULY effective, you need to get rid of all the of the rotted food--that's what's drawing the flies (Free food! say the flies). Get rid of the rotted food (and food-contaminated trash) and you get rid of the fruit flies. Try to get rid of as much of the rotted food as you can before doing the cider vinegar trick!
    
    Rotted food/garbage + fruit flies = GROSS, and it's tough to handle. But the best way to deal with that is to set out your fruit fly traps and then arm yourself with:
    
    
11. Rubber gloves. Those bright yellow ones some people wear in washing dishes are ideal. Latex-free are also available (example if you're allergic. Available at local groceries and drugstores.
    
12. Dust masks. Or, if you're really concerned about odor and have the money to spend, consider a respirator. Available at local hardware stores and places like Home Depot.
    
13. Wear old clothes you don't give a shit about. Ideally something like old, heavy jeans, a long-sleeved shirt, and heavy socks.
    
14. Sturdy shoes. Heavy sneakers are ideal for this sort of thing. They can be tossed in the wash afterwards.
    
    Once attired with the above, you are invulnerable to fruit flies, gnats, mosquitoes, spiders, and quite a few other vermin. You can then grab a garbage bag, and sail into things.
    
    Good luck with everything. I don't have any anxiety advice, but maybe having a plan to tackle your mess can ease your mind a little.

I have the Libman Spray mop, which essentially is a refillable Swiffer. I used to a Swiffer and loved it, but got really tired of constantly paying such a high price for the refills and the mop pads, especially since the mop pads would only seemingly clean about half the kitchen floor before needing to be tossed. Anyhoo, I love, love, love this thing, and like the OP, have two reusable, cleanable mop pads. I use one and rinse it out in the sink occasionally as I'm cleaning the house, then throw it in the laundry and just keep rotating the two. I also have a nubbly one I use for dry dust mopping. I have an approximately 1300 sf home with wood floors throughout, except bathroom which is tile.

Anyhoo! I think O'Cedar brand and Rubbermaid also make a version. I would definitely recommend a system like this to anyone, especially if you have lots of floors to mop. I think it's definitely the quickest, best and most economical (for me anyway) way to get the floors nice and clean. This is coming from someone who has two kids and 3 very furry kitties.

I'll give my /r/AutoDetailing inspired rundown. I live in an apartment so a lot of this is extra hassle if you have access to water.

2 Bucket (apartment) Method Wash

• 5 gallon bucket of water (w/grit guard)
  
  
• 5 gallon bucket premixed soap and grit guard
  
  
  • Lids for transportation
    
    
• Head down to the local self service wash. The kind with the foamy brush and pressure washer. (ONLY THERE FOR THE WATER)
  
  
• I follow 2 Bucket method above but my process is a bit different since I'm paying for the water.
  
  
  • Clean wheels/wheel wells, exhaust tips, rinse, wet car and remove built up debris/bugs with remaining time
    
    
  • Clean roof, windows, hood, front, rinse
    
    
  • Clean driver side (not bottom), back, passenger side (not bottom), go back and clean bottom of sides, rinse
    
    
    • If time remaining, switch to low pressure for final rinse
      
      
• Dry car and head home!
  
  My personal favorite wax is Collonite #845. I also like Griot's Best in Show since it can be found in big box stores locally.
  
  I would also recommend a paint protection such as Cquartz as extra protection against winters and daily driving.
  
  The absolute #1 rule to keeping your car swirl free, NEVER USE AUTOMATIC CAR WASHES.

I just got a stainless set for Christmas this past year. I was really excited but also terrified, then I did some research. The key to stainless steel cooking is heat the pan first before adding ANYTHING. I believe the adage is hot pan, cold fat.

So, say you want to cook something over medium-high heat.

• Turn the burner on to that, set the pan on it and forget about it for a few minutes so the pan comes up to heat empty.
  
• Then, add your fat, so butter, olive oil whatever (I don't do this with bacon because the bacon is essentially the fat, just heat and slap in your bacon), let the fat come up to temperature. You want to wait until you see a nice shimmer on the surface for things like olive oil. * Then add your food.
  
  I can even scramble eggs in my skillets and they slide out like nothing. You'll notice after a little practice that these babies are, when used properly, less prone to stick than something with a non-stick coating, unless of course you burn the shit out of it. :)
  
  Also, for cleaning, let the pan cool before you wash it. My favorite things to use are either no scratch Scotch Brite pads or Scotch Brite Dobies but in most cases I don't really need to scrub. That being said, you're going to encounter situations where you burn things or the fat oxidizes on your pans and for this, hands down, get some Bar Keepers Friend. It's the best thing ever.

Try this.

I watched a ton of videos before I got this and saw the same problem you pointed out with bristle brushes. Your always gonna leave abrasions when you use them.

The velvet on this one can push crap in to the grooves but if you’re careful, you use some cleaning solution, you clean your needle and you clean any vinyl before putting it on the table I’ve not had problems.

If I had any significant spare cash free every month I’d honestly buy a really nice vinyl cleaner and use this before playing my stuff but realistically they’re just too expensive for where I’m at now.

Here's a complete list of all the diy vendors in Canada

The Broke Vaper is a good place to start but you'll prob want to branch out if later if he doesn't have all the flavors you (eventually will) need.

Also, buy more than 5 flavors to start, you WILL want them believe me. Hop on ELR and type some flavors in the search bar that appeal to you. Can be as simple as "banana". Then sort by rating. Pick out a few recipes that look tasty to you and buy the flavors based on the recipe. Most people mess up their first order by buying flavors randomly without a recipe in mind. That's a pro noob tip for ya buddy.

A note on ELR, make an account and use it. You can save all your recipes there. It has an ejuice calendar and a bunch of cool features. You can log all your flavors and search recipes based on the flavors you own. You can follow your favorite mixers to be updated when they post new recipes. Other stuff too so poke around there a lot.

Also, https://www.reddit.com/r/DIY_eJuice all day everyday. Read the bloody side bar! Don't post on that sub til you've read the entire sidebar and most likely you should put your initial questions in the "Weekly New Mixers Questions Thread" which is always at the top. But ya, the sidebar will teach you everything you need to know to get started and save you from making dumb mistakes. Def worth the time to read.

Important, I highly recommend buying a scale to start. Don't waste time, money, energy mixing by volume. The broke vaper starter kit does not come with syringes, graduated cylinders, etc anyway so by the time you purchase all you need to mixing by volume, you could've spent a few extra bucks and just bought the bloody scale. So here's the link for the scale everyone uses.

I'm almost done here.. bare with me. You'll also want to grab some Nitril gloves. I linked you the black ones in case you feel like doing some cat burglaring on the side.

Last, here's 3 fantastic tutorials to get ya started..

https://www.youtube.com/watch?v=_L18sa1DJJw

https://www.youtube.com/watch?v=-RdboUVCROs

https://www.youtube.com/watch?v=BkOE-blQBtc

Also go ahead and subscribe to https://www.youtube.com/channel/UCFoe3PEb1_7sAY1ZgehNP3A, your main source for YouTube DIY mixing knowledge and entertainment.

Welcome, see you around :)

Ps. I did an unboxing of The Broke Vaper starter kit if you want to see what you'll be getting.. https://www.youtube.com/watch?v=6Xsa_TwVUrc

You have already done one step forward, you're determined to have healthy fingers.

I've read posts where some people recommend the finger gloves. I think it would help if you use neosporin like some already recommended you or Lucas' papaw ointment.

Happy belated birthday! 🤗

Keep in mind I am no professional on the subject, this is just my opinion. That being said:

To clarify my original post, I have always been told to avoid cleaning fragile glass with dry cotton (like a t-shirt for example.)

I'm sure that a modern lens is sturdy enough to withstand cotton, but I don't think that it would be recommended by many people. If you have microfiber available, it will make the job much easier and safer.

I also notice that when I use a clean microfiber cloth, I can get away without using cleaner (at least) 50% of the time.

P.S. these are amazing for the price, IMO:

http://www.amazon.com/Zwipes-Microfiber-Cleaning-Cloths-48-Pack/dp/B00ANZHG4U/ref=sr_1_2?ie=UTF8&qid=1377376562&sr=8-2&keywords=microfiber

Honestly, the kit is only an OK deal. It's fairly overpriced for what it contains.
For less money (assuming I'm looking at the same bundle as you), I'd get the following:

• http://amzn.com/B00BS3GM7I - same foam gun, different branding
  
• http://amzn.com/B00BJCAPEE - Mr. Pink is PH balanced soap that foams extremely well, and is just as good in buckets. Citrus Wash and Gloss will strip wax.
  
• http://amzn.com/B00RDMBTNA- Microfiber wash mitts.
  
• http://amzn.com/B00ANZHG7C- Cheap, half decent microfibers.
  
• http://amzn.com/B00EVY2LKI - Drying Towels
  
  Also, it's really important, at least in my opinion, to have 2 buckets and Grit Guards. I'd get two of these: http://amzn.com/B00ABYVTZA and pick up some buckets at Home Depot or Lowes, or order one of the bucket/grit guard kits from Autopia.
  
  Finally, Microfibers are an investment as long as you take care of them. What I linked is cheap, OK quality stuff. Check out The Rag Company, and maybe consider getting one of their starter packs for better rags.

I just use a regular broom and this mop https://www.amazon.com/dp/B00KB75YE4/ref=cm_sw_r_cp_apa_CMNDyb871P2C8

The spray part went out on me (I think it's clogged but I can't figure out where), so I just use a spray bottle with it. Vinegar water mixture and a little baking soda if needed help get my tile floor clean. If you really need to clean the grout, I suggest scrubbing it with a cleaning brush or an old toothbrush. I've been told that denture paste is great for grout.

I apologize for the formatting, I'm on mobile.

Mop handle: fiberglass, tough as shit.

https://www.amazon.com/gp/aw/d/B004MDM950/ref=psdcmw_10802561_t1_B005KD5UYS

Rubbermaid mop heads: again, wash ( regular or gentle, not heavy) and hang dry.

https://www.amazon.com/gp/aw/d/B005KDEMRE/ref=psdcmw_10802561_t2_B005KD3XDS


Wring bucket: sturdy, can take alot of use and you can replace the wringer and bucket separately, altho it's going to be at couple years before the wringer needs replaced.

https://www.amazon.com/gp/aw/d/B00006ICOK/ref=psdcmw_10802561_t1_B00GJ0Q47S

It seems expensive but it's one of those buy for life things.


Dust mop handle: snaps on to the wire frame. You can even replace the pole for like a 8$

https://www.amazon.com/Rubbermaid-Commercial-Snap-Handle-Natural/dp/B005KD92l

Dust mop frame : easy to maneuver, low profile, basically lasts forever even if you run over it with a floor scrubber or gator.:
https://www.amazon.com/Rubbermaid-Snap-Wire-Dust-Frame/dp/B005KDDKTK?th=1&psc=1



Dust mops ; you have two options, cloth and microfiber. Both have their strengths and weakness. Both can be washed and hung. Cloth ones last longer and are better for larger spaces and pick up bigger bits of things better.

Microfiber is good if you don't accumulate alot of dirt and dust, works well with pet hair.

Synthetic cloth: https://www.amazon.com/gp/aw/d/B005KD2PQY/ref=psdcmw_10802561_t2_B005KD92SI?th=1&psc=1

Microfiber dust mops need a different frame and handle. They are lighter and thinner but feel light compared to the synthetic cloth and wire frames. The frame relies on a type of velcro grip. Eventually that wears out and you have to replace the heads and handles/frames more often.

https://www.amazon.com/gp/aw/d/B005KCJY8M/ref=mp_s_a_1_15?ie=UTF8&qid=1510206915&sr=8-15&pi=AC_SX236_SY340_FMwebp_QL65&keywords=microfiber+dust+mop+head+rubbermaid

Microfiber frame/handle: https://www.amazon.com/gp/aw/d/B005KCOB4Y/ref=mp_s_a_1_3?ie=UTF8&qid=1510207125&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=microfiber%2Bdust%2Bmop%2Bhandle%2Bframe%2Brubbermaid&dpPl=1&dpID=31kwOkYrU6L&ref=plSrch&th=1&psc=1


For home use, 18/24 inch width should be sufficient.

I swear I'm not a shill. I've just had alot of exp with commercial cleaning products and equipment.

If you ever want some cleaning chemical recommendations hit me up.

Don't buy a Swiffer, they're shit. Get this instead, and use it to mop with this no-rinse solution.

You'll just have to trust me, I've tried everything because we have crawling babies, and the above combo is by far the best. Also, don't use Bona products unless you're going to buff it every couple of days. If you don't, you'll just end up with a pasty, cloudy mess, especially on dark floors. Then you'll have to strip it down; no bueno.

If you can afford it, a robotic vacuum also helps a great deal. I prefer the Neato over the Roomba, because it's an actual vacuum. As such, it is significantly louder, but does a much better job, particularly with pet hair.

For spot cleaning before a friend pops in, you can't beat a cordless vac. They're actually a blast to use and you can sprint around the house with them when needed. If guests are dropping in last minute, my wife will run with that cordless and I'll chase her with the mop. Pristine house in under 5 minutes! Lol

Majority of the time, you get the fingerprints, because you always adjust your glasses as they fall of out position when you look down. it can be many of reasons why they fall, e.g. You got wrong size frames etc.

to fix your 2 issues quickly, buy these two products;

Microfibre Cloths - These are the only recommended clothes, that will clean your lenses perfectly.

Anti-Slip Ear Hook Grips This will help you keep your glasses in position even when you look down, reducing the amount of adjustments hence less fingerprints.

These links are from Amazon

hope it helps, as it did help me.

Cast iron lover ... it's easy.

You need:

• hot water
  
• a scraper like this
  
• a pad like this
  
  Technique:
  
  

• Rinse the pan with the hottest water you can stand.
  
• Use scraper to remove anything stuck to the bottom.
  
• Run the scotch pad around a couple of times.
  
• Dry thoroughly.
  
• Put on a warm burner for a minute or two to ensure all the water is off.
  
• Lightly coat it with some oil on a paper towel and wipe hard to ensure any oil left is a very thin layer.
  
  Done.
  
  Don't believe me though, watch this great demonstration, starting at 16:30

there are drip tip covers that come on disposable ecigs but to cover the intake holes would be another issue. it depends what size atomizer you have. if you are using a 22mm or larger you could probably use an unlubed condom or something like that. for the smaller ego/mini sized atomizers something like this may be in order.

good luck

303 Aerospace should work great it's a cleaner and protectant, but you might also like Nextzett which I posted above.

For matte paint/PPF I would recommend Chemical Guys Meticulous Matte Quick Detailer: https://www.amazon.com/Chemical-Guys-SPI_995_16-Meticulous-Detailer/dp/B00FQHY64S/ref=sr_1_1?ie=UTF8&qid=1535948037&sr=8-1&keywords=quick+detailer+for+matte

For towels, I like:

Plush for cleaning: https://www.amazon.com/gp/product/B00BQYCKE8/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Miscellaneous Disposable (not for dirty surfaces since they are low plush): https://www.amazon.com/gp/product/B00937YLE2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Waffle weave for drying: https://www.amazon.com/Chemical-Guys-MIC_781_01-Waffle-Microfiber/dp/B00BQYCIVI/ref=sr_1_3?ie=UTF8&qid=1535948166&sr=8-3&keywords=microfiber+drying

Lint free for glass: https://www.amazon.com/gp/product/B00WC5KQGE/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

When coating, always have plenty of low GSM no lint microfibers on hand. These will be trashed after use. I use these economical ones. For CquartzUK, the process is apply one cross-hatched coat, then immediately wipe with clean microfiber. Follow with another clean microfiber wipe. Some also follow with a third clean microfiber to be safe. This way you will not leave high spots.

You will need Reload or Gyeon Cure as your protective top coat while the car is exposed to the elements since the coating takes up to a week to fully cure. Only top ceramic coatings with other ceramic topcoats. The only purpose of topcoating is to add an extra layer of protection, extra gloss, extra longevity.

I use this. And since i don't want to just get it every where i keep it in this so i have some control. This is especially crucial when doing, say a galaxy s6 or s7, where the screen is directly behind the battery. This is also useful for when those stupid commando strips break in iPhones (the white glue under the battery). And then to actually get whatever i am trying to get out i use playing cards to do the glue cutting and removing of the battery (or what ever) Have to be careful with acetone tho because it will eat through a lot of softer plastics. If your worried about that, you can use 90% alcohol. I don't mix them, i just use what ever is needed for the job at hand.

Acetone is also really good for cleaning glue off iPad and many other things when replacing broken screens/digitizers. But for that i use cheep micro fiber cloths you can get at walmart or online. My tech bought a bag of like 30 of them at costco for like 15$. Something like this

Hope this helps.

SECTION | CONTENT

--|:--
Title | How to SUPER CLEAN Your Car (Best Clean Possible)
Description | Learn How to wash your car properly. In this video I go over everything you need to know to Super Clean your car and make the paint go from old, dirty, and dull, to clean, glossy and bright! I cover touchless foam wash, touch wash, clay bar, drying, paint correction, and using sealer or wax. Here are all the products I used: Pressure Washer: http://amzn.to/2bt7GZN Foam Cannon: http://amzn.to/2brRODT Foam Gun (hose): http://amzn.to/2aTwFkr Grit Guard: http://amzn.to/2aTwEN6 Grit Wash Board: http...
Length | 0:18:55






****

^(I am a bot, this is an auto-generated reply | )^Info ^| ^Feedback ^| ^(Reply STOP to opt out permanently)

Finger Gloves

Seriously. These are not just finger cots which are the flimsy little things you use to briefly do something unpleasant. These are actual good quality material gloves for your fingers made out of rubber but allow the normal amount of dexterity you would have without them.

One note, they don't do a great job of allowing you to use a smart phone, but if your fingertips are all torn up you're probably not too keen on touching things like a touch screen at the moment anyway.

I have psoriasis on my finger tips these are the only things i've found that allow me to retain usage of my hands without cracking and bleeding all over or having the desire to get rid of the raggedy skin.

You can get them from the manufacturer too if you want. their site is a little crappy, but the gloves are great.

I suggest a steam mop for deeper cleaning.

For casual weekly cleaning or whatever I have a reusable Libman mop. Basically it's a Swifer that you fill yourself and wash the pad.

I make this homemade cleaner and it works wonders.

I have original hardwood floors from the 1930's and I swear by the techniques above. It's both gentle and effective.

Do not use Murphy's Oil Soap unless your floors are unfinished wood floors!

I recently got some for myself. However, I am allergic to latex so I had to buy latex free ones. The ones I found are Mr.Clean bliss latex free gloves. They are also lined with fleece in the glove so your hands dont get sweaty and gross. Best $5 ever spent.
amazon link

This isn't something I've tried, but I've been meaning to for similar reasons to you.... you could try attaching a scrubbing brush to a drill, or buying a special drill attachment like this!! https://www.amazon.com.au/Drillbrush-Scrub-Brush-Drill-Attachment/dp/B075F915WR (I didn't realise you could actually buy these, this is very exciting)

This is what you’ll need

GlovePlus Industrial Black Nitrile Gloves - 5 mil, Latex Free, Powder Free, Textured, Disposable, Medium, GPNB44100-BX, Box of 100 https://www.amazon.com/dp/B004BR571K/ref=cm_sw_r_cp_api_i_57QxDbNAPE71D

Scott Shop Towels Original (75147), Blue, 55 Sheets/Standard Roll, 12 Rolls/Case, 660 Towels/Case https://www.amazon.com/dp/B0035BTQ06/ref=cm_sw_r_cp_api_i_S8QxDb2F0YNPW

Mountain Falls 91% Isopropyl Alcohol First Aid Antiseptic for Treatment of Minor Cuts and Scrapes, 32 Fluid Ounce (Pack of 6) https://www.amazon.com/dp/B072PVPR1Z/ref=cm_sw_r_cp_api_i_f9QxDb17T44FY

Or 99%^

LOCK & LOCK HPL933BT Pickle Container https://www.amazon.com/dp/B06WD1F7HD/ref=cm_sw_r_cp_api_i_39QxDb93D2X9H

Or a glass jar to fill with the IPA and rinse the prints in

Do not continue printing with resin until you have all of the materials trust me, you do not want a resin burn

A uv light is not necessary, you can put your prints out in the sun

I just go with whatever's free from eyeglass stores -- many glasses stores give them away with their own company brand on them. You can also find them free at tech conferences with corporate branding.

They're also about $0.80 each when bought from Amazon it looks like: http://www.amazon.com/Microfiber-Cleaning-Cloths-ECO-FUSED-Spectacles/dp/B00A7P2JGQ/

Got this last week with my xmas gift cards. Works just like the ones in my fast food days. Cleans kitchen and basement great!

http://www.amazon.com/gp/product/B00006ICOK
http://www.amazon.com/Rubbermaid-Commercial-FG9C7400RED-Wavebrake-18-Quart/dp/B000RMSGXO
http://www.amazon.com/gp/product/B005KD3XDS
http://www.amazon.com/gp/product/B005KDEMRE

get some bristle pipe cleaners. soak your pipe completely submerged in rubbing alcohol or Heet anti-ice additve for gas tanks for a stronger alcohol. add a good amount of kosher salt, make it a slurry. shake it around in a ziplock bag and the resin will just fall out. use the bristle pipe cleaners, and if you go to home depot currently, you can buy a set of 4 angled picks that are awesome for cleaning. they're on sale at Home Depot right now for under $5.

add a set of bottle brushes and a few cans of keyboard cleaner, and you're set.

owch man... I mean, may not of hurt while you were playing, but it could keep you from playing for a bit... there's finger guards available on Amazon if you'd like to avoid that in the future:

http://www.amazon.com/Medium-GORILLA-fingertip-protectors-mandolin/dp/B0073V9HCQ

and

http://www.amazon.com/Finger-Gloves-Reusable-Rubber/dp/B0002NYPGU/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1373498587&sr=1-1-catcorr&keywords=guitar+protective+glove

I'd imagine it wouldn't be too hard to fashion your own, or better yet a glove, for style points.

I have reusable straws and they're great. I recommend getting those tiny brushes that are used to clean baby bottles though.

Nitrile gloves. They're amazing. I'd been on the job for 17 years before I discovered the magic of nitrile exam gloves. I was working at the county hospital and started wearing gloves while working to avoid "biohazards", and noticed several remarkable things about them.

First, the obvious: door handles have whatever people had on their hands on them, and we have to touch them. Two years working for the county, only got sick once.

Second, they keep your hands clean. Job's done, strip the gloves and the lock grime goes into the garbage with the gloves. Most locksmiths I know have that black grime embedded in the cracked calluses of their fingers, mostly because we all end up turning a lot of little screws and stuff by hand. That crud never washes out normally. Three weeks after I started wearing gloves, my hands were pink and clean again.

Third, nitrile absorbs that black grime like a sponge. Nothing is worse than working on a greasy lock and leaving a bunch of smeary black fingerprints all over a white painted door. Wearing gloves, and grime you touch sticks to the gloves like a magnet.

Fourth, brass splinters actually have trouble penetrating rubber. I don't know what it is, but they very rarely go through. I won't say never, because I've still gotten splinter through a nitrile glove, but it seems to happen a lot less.

I used to use the cheap thin 3.5mil blue exam gloves that I got free from my former coworker at the hospital, but I've recently switched to heavier black 6mil gloves. They cost more, but they hold up a lot better. Thin gloves I'd end up having to change one that tears two or three times per job. Black ones, they hardly tear at all.

Thanks. Should note I do my own Chimney sweeping using one of those "sooteaters" weed whacker type drill attachments you feed from the bottom up.. Works great.

Thus my question about what I should look for in my inspection.


this:
https://www.amazon.com/Gardus-RCH205-B-SootEater-Chimney-Cleaning/dp/B0010H5JXA/ref=sr_1_2?ie=UTF8&qid=1550935155&sr=8-2&keywords=chimney+sweep+drill

I don't know if you know this, but Mr Clean magic erasers are literally just melamine foam sponges. There's absolutely nothing special about them besides the Mr. Clean brand name. They are in no way different than any other melamine foam sponge on the market.

Here is a pack of 50 "magic erasers" for $12.

I'll page in OP u/eveningsnow because when I learned magic erasers are just melamine sponges with enormously hijacked prices, it was life changing, and since y'all use them WAY more than I do, I hope this helps a bunch!

Lube: http://www.walmart.com/ip/DuPont-Teflon-Chain-Saver-11-oz/16672659

Cleaner: http://www.walmart.com/ip/DuPont-Motorcycle-Degreaser-11-oz/16672660

Grunge Brush in case you don't have one: http://www.walmart.com/ip/DuPont-Grunge-Brush/16672661

Microfiber Cloths: http://www.amazon.com/Zwipes-Microfiber-Cleaning-Cloths-48-Pack/dp/B00ANZHG4U/ref=sr_1_2?ie=UTF8&qid=1406656133&sr=8-2&keywords=Zwipes+microfiber+cloths

I used to use Kerosene and Chain Wax, but I like these a whole lot better, and they're cheaper to boot.

50 Pack - SimpleHouseware Microfiber Cleaning Cloth https://www.amazon.com/dp/B01NAAJLVG/ref=cm_sw_r_cp_api_i_0hqPCbJPSNNKE


These are your friends for everything electronic related to get rid of those greasy smudges. Have them all over ready to clean.

https://www.amazon.com/Drillbrush-Piece-Scrub-Brush-Attachment/dp/B075F915WR/ref=pd_lpo_sbs_201_t_1?_encoding=UTF8&psc=1

Collect 'em all!

I have that kit. Works great. Get the strongest white vinegar you can and let that sit for a while and then go to town.

https://www.amazon.com/Pumie-Scouring-Stick-HDW-12T-4PK/dp/B00N3EI34U

I use one of these when I want to get my grill pan perfectly clean. You will have to re-season after though.

By naturally, do you mean without using chemicals?

If so, use a pumice stone. There are a few on the market, I get mine from Amazon or Home Depot. You just get it wet and scrub the stains and scale off. If you don’t like the sound of nails on a chalkboard, you won’t like this method. Otherwise, it’s very effective and uses no chemicals.

Why do you wear those huge gloves? You need to wear something like this so you can actually hold her between your thumb and index finger like this.

https://www.amazon.com.au/Diane-D9850-Neck-Duster/dp/B006YFCHSS/ref=sr_1_2?ie=UTF8&qid=1519681313&sr=8-2&keywords=diane+neck+duster the price difference is hilarious. I forgot about amazon AU :)

I've recently used some contractors to do work around my house which I found off Angie's List and HomeAdvisor. I used coupon deals for all of the work I bought and I noticed that the contractors who did the work seemed to have smaller operations that favored small, maintenance work as opposed to be more larger whole operations.

For example, for the guys who cleaned my gutter it was basically the business owner who drove who his two guys to my house. They put up a long ladder and one guy went up with a hose and leaf blower and the other guy cleaned up anything the other guy sent down. It took about 30 minutes and they made $100 for that and did that all day long.

Another example is the chimney cleaner who simply used this device: Rotary Chimney Cleaning System and then used a soft wire brush to clean out my dryer duct. He spent 20 minutes and made $89 and likewise did this all day long.

Oh, as a chimney sweep, given that I'm fairly handy (do all but the most major car repairs myself, basic home plumbing, interior repair, appliance maintenance, builds PCs, ect.) would you recommend getting something like this and cleaning my chimneys myself? https://www.amazon.com/gp/product/B0010H5JXA

Or not a good idea for some reasons I'm not aware of?

Yep, magic erasers or the off brand will take care of that way faster.

because i'm lazy.

this and some dawn dish soap are all I use to wash.

When cooking I like to use something similar to this


It's probably all placebo but the spatula helps knock down the high spots a bit.

And do you really need an excuse to use power tools?

I think they actually said a little while ago that you're not supposed to put anything in the dishwasher anymore. Only ISO Alcohol will do these days to not void the warrantee. That being said, get some thick baby bottle brushes from the store or here and put some 91-99% ISO on it and brush away. I did that for around 5 mins, and it looked and smelled brand new.

I also dump my water every day, rinse off everything, and spray my kitchen sink water sprayer down the tube every night before I go to bed. Everything dries disassembled, and is perfect for use the next day. I only have to clean with iso every 3 weeks or so.

https://www.amazon.com/dp/B006YFCHSS/ref=cm_sw_r_cp_apa_8.gLAb1HQZWC9

This thing works like a frickin dream. Heavy duty af, no joke.

Gloveworks HD black Size Large. They're a little thinner (6 mil) than the green and orange ones (8 mil) so you can go a size smaller since they stretch a little more.

Edit: Amazon link

Is there a difference between Microfiber towels that are marketed as "face towels" vs "cleaning towels"? There are some huge price differences on amazon per towel for ones I am looking at:

https://www.amazon.com/50-Pack-SimpleHouseware-Microfiber-Cleaning/dp/B01NAAJLVG/ref=sr_1_1?ie=UTF8&qid=1493296683&sr=8-1-spons&keywords=microfiber+cloth&psc=1


https://www.amazon.com/Plush-MojaFiber-Microfiber-Face-Cloth/dp/B017WUVXRE/ref=sr_1_1?ie=UTF8&qid=1493296553&sr=8-1-spons&keywords=microfiber+face+cloth&psc=1

I use a SootEater and a power drill to clean my chimney liners every year. That will send the accumulated creosote in the liner down into your stove. From that point, simply shovel the creosote/ash out and dispose. You will likely need to remove the top baffle inside the stove to get access to the stuff dropped down the liner.

Is this any good for cleaning records?

https://www.amazon.co.uk/dp/B000MS5X9I/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=3IJ2477Z2F9C0&coliid=I2QKH24JTCQ2PP

Cheers.

What about

https://www.amazon.co.uk/CLEAR-GROOVE-Advanced-Record-Cleaner/dp/B006DA4GUG/ref=sr_1_9?ie=UTF8&qid=1519823398&sr=8-9&keywords=Vinyl+cleaner

Or

https://www.amazon.co.uk/Acc-Sees-Velvet-Antistatic-Vinyl-Brush/dp/B000MS5X9I/ref=sr_1_3?ie=UTF8&qid=1519823398&sr=8-3&keywords=Vinyl+cleaner&dpID=41xdtpekdLL&preST=_SX300_QL70_&dpSrc=srch


Thanks 🙏

Reverse osmosis filtered, or just filtered water, is better than straight tap. I'm not sure about distilled. This is why you have the white stuff outside the smartpots, it's calcium buildup from your unfiltered tap water. Ph any water of course. I think you might need to let the plants get really dry, no water for at least 2 days. Also might as well check the Ph meter against a common household substance with known acidity levels (google for a chart) to see if it's in the right range. Or grab a Ph test kit or strips. Buy this for your drainage, and empty the runoff daily (ideally as soon as you can after it finishes draining):

http://smile.amazon.com/Chemical-Guys-IAI503-Guard-Insert/dp/B00ABYVTZA/ref=sr_1_2?ie=UTF8&qid=1453910790&sr=8-2&keywords=grit+guard+bucket

Leaving it sitting in water will cause bad things. The roots will grow out the bottom of the pot looking for water and quickly rot. Between using tap water and letting the pots sit in runoff, and possibly over feeding, I bet those were most of your problems. The existing damaged leaves won't get any better, but hopefully it'll droop less, and new leaves will stay healthy :).

Just as an FYI, those erasers are made of melamine, you can buy the stuff on amazon for cheap. Melamine works so well because its a very abrasive material at a microscopic level.
Don't buy anymore magic erasers. Check these out

Can confirm, this one is good.

Lesson learned.

In the future, use a blower and brush first, and then a clean cloth - or ideally Zeiss Lens Cleaning wipes.

Microfiber lens cleaning cloths are so stinking cheap that you can use new ones often. Here's a pack of 10 for $7.50.

Why does she look like one of those neck duster brush things hairdressers use?

If you need more, order now on Amazon. Same product minus the name brand mark up. There are a lot of different sellers with different quantities based on needs. Melamine Foam Cleaner - https://www.amazon.com/dp/B076Q7JHR2/ref=cm_sw_r_cp_apa_i_XzuBDbXVWNJ2P

no.

well, there might be pumice stones made for heavy duty use like grills or whatever but i'm talking about this one

This if you need a 'spray mop': http://smile.amazon.com/LIBMAN-CO-4000-Libman-Freedom/dp/B003NYFDWK/ref=pd_sbs_hg_10?ie=UTF8&refRID=0M90BEG955HNT5B48Y25

Or this if you just want a regular ol' swiffer replacement: http://smile.amazon.com/LIBMAN-CO-00117-Libman-Microfiber/dp/B002YLPLSY/ref=pd_sim_hg_9?ie=UTF8&refRID=0PJ2NCQV64XWTX6927QW

Look up finger cots on Amazon or check your local drug store.

Apply healing salve and keep them on over night.

Here are the ones I have but there are many different brands. Reusable Rubber Finger Gloves(tm) for Durable and Versatile Finger Only Coverage

Eco-Fused Microfiber Cleaning Cloths - 12 Pack - for Cleaning Glasses, Spectacles, Camera Lenses, iPad, Tablets, Phones, iPhone, Android Phones, Laptops, LCD Screens and Other Delicate Surfaces https://www.amazon.com/dp/B00A7P2JGQ/ref=cm_sw_r_cp_api_i_7BmjDbKS4CFKH

Even more for the same price!

That what I would have thought, but then why do they sell pumice specifically for cleaning toilets?

This Pumice Stone is what I use. It won’t scratch the porcelain.

Pumie Scouring Stick (4PK) https://www.amazon.com/dp/B00N3EI34U/ref=cm_sw_r_cp_api_i_3IgXDbEDK9Q45

This one

https://www.amazon.com/Microfiber-Cleaning-Eyeglasses-Glasses-Screen/dp/B00NR9S3EQ/ or https://www.amazon.com/50-Pack-SimpleHouseware-Microfiber-Cleaning/dp/B01NAAJLVG/

?

I got you

yeah “finger gloves”

Just ordered 2 of these and it is CG, but this is also a linked item from the wiki? https://smile.amazon.com/gp/product/B00ABYVTZA/ref=od_aui_detailpages01?ie=UTF8&psc=1

https://www.amazon.com/Ultimate-Bottle-Brush-Cleaning-Shapes/dp/B0093A7QSW/ref=sr_1_3?keywords=cleaning+brush+kit&qid=1556899900&s=gateway&sr=8-3

I use this kit and ISO

https://www.amazon.com/gp/aw/d/B01NAAJLVG/ref=mp_s_a_1_1?ie=UTF8&qid=1523678712&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=microfiber+cloth&psc=1

nitrile

Here is the mobile version of your link

One of the cashiers at a store I frequent uses finger gloves. I thought they were genius.

https://www.amazon.com/dp/B00ABYVTZA/ref=olp_product_details/154-6713182-5056953?tag=slickdeals&ascsubtag=5a0efbfcb1e611e68115baba51364ac10INT&_encoding=UTF8&me=

ON SALE

https://www.amazon.com/Reusable-Finger-Gloves-Versatile-Coverage/dp/B0002NYPGU

Maybe it’s just me being weird again but I can’t unsee the white finger gloves .

I got something along the lines of this

https://www.amazon.com/Reusable-Finger-Gloves-Versatile-Coverage/product-reviews/B0002NYPGU

but not that exact product, can't remember the exact one I got. I wear it over my fingers so I physically can't pick at my skin, I usually wear it at home or whenever I'm alone

Vendono delle gomme apposite per pulire le tastiere. Sono delle paste appiccicose che tirano via tutto. Sennò pezzuola con un po' d'alcool.

alternativamente...

Can I bug you for your opinion on the chimney cleaners that you hook to a drill? Amazon link if you don't know what I'm talking about. I tried it and got nothing out, but I also only have fires a handful of times a year and there was no obvious buildup in the lower part that I could see. Masonry chimney btw.

As a professional auto detailer, this is what I do to keep the bike looking spiffy with minimal risk of swirling the paint.

First, I use a pressure washer on my bike, it's a 2000 psi washer so no real risk of damage to anything and works great for getting those bugs out of the radiator and tiny little crevices as well as a good majority of the dirt which is just less to grind into the paint when you finally hit it with the ONR (https://www.amazon.com/Optimum-NRWW2012Q-Rinse-Wash-Wax/dp/B00GG9FB8U/ref=sr_1_1?s=automotive&ie=UTF8&qid=1469797720&sr=1-1&keywords=onr). A hose would work also, just not as effective. (If you have the money, go buy yourself a foam cannon with some chemical guys honey dew soap and save yourself some time)

Then I grab 2 buckets with Grit Guards in each. (https://www.amazon.com/Chemical-Guys-IAI503-Guard-Insert/dp/B00ABYVTZA/ref=sr_1_1?s=automotive&ie=UTF8&qid=1469797070&sr=1-1&keywords=grit+guard) and fill one with ONR and the other is a rinse bucket. The washing part is pretty simple. Buy yourself a microfiber wash mitt, dip it in the bucket with ONR and scrub an area of the bike down. Rinse it off and the rinse bucket and repeat until the bike is clean. Pro tip: Do your paint first and other areas that can be easily swirled and work your way to the dirtier areas on the bottom of the bike that are more likely to have the mitt pick up dirt.

I dry the bike with a leaf blower dedicated to detailing (basically one that has never been used in reverse to suck leaves up) to get all the hard to reach places dry. You can also use a standard microfiber drying towel for this.

Once it is dry, I'll hit the chrome with a chrome polish and put a coat of wax on (collinite 845 is my go to, but any mequiers wax is plenty good) and hit the mirrors and headlight with some glass cleaner.

If you have a chain, put some wax on that bad boy since you most likely just washed it all off. I don't put any kind of vinyl or leather protection on the seat because shit is always slippery. I know wheels look nice when they are nice and shinny, but you will eat shit if you put on any kind of wheel shine.